Related
Every thing was fine while my nexus s istalled CM10.
But after I install CM10.1 M2,I lost my USB connection.
I get the following when the cable is connected: "USB device not recognized".
I tried on different computers and usb cables then got same "USB device not recognized".
After I google that, They said install an app called "USB Switcher". Open it and clicked change to mass storage
and reboot. Then my computer still said "USB device not recognized".
I found the cyanogenmod official forum. There was a man got same proble. I post my story.
but did not get reply.
I thought it may be a bug with MTP transfer mod.
But I did got more information about that.
I thought it may be a bug for CM10 ,but now I intalled CM10 MOD from CM10 M2 TO RC5. Still got same thing.
So I come here for help.
Thanks in advance for any suggestions.
Hi there mate,
try this method :
http://forum.xda-developers.com/showthread.php?t=1901617
cheers
That did not help.
eytan123 said:
Hi there mate,
try this method :
http://forum.xda-developers.com/showthread.php?t=1901617
cheers
Click to expand...
Click to collapse
Hi there
That did not help.
The problem happened after I upgraded CM10.1 CM2 from CM10.1 CM1.
What I did is that just wiped data,cache and install CM10.1 CM2. Then I lost USB connection.
No Prompt for USB storage when connected to PC
Hi, I notice that i am having a problem since some days that am not getting the prompt for USB storage when connected to my Laptop.
I tried all possible solutions changing cables, mounting SDcard from boot, etc etc and also chnaged back an older update of the current ROM. But nothing seems to work. Please help
Model - Nexus S
Android Version : 4.2.2
Baseband Version: I9020XXKI1
Kernel Version: 3.0.50-Cynogenmod-gb97752e [email protected] #1
Fri Jun 7 19:30:29 IST 2013
CPU ARMv7 Processor Rev 2(v71)
Memory: 396
Avatar ROM Version: 2.14b- 1029 20130607-crespo
Build Date Fri Jun 7 19:22:06 IST 2013
Build Number : cm_crespo-userdebug 4.2.2JDQ39E 1029 dev-keys
Vijay
[email protected] said:
Every thing was fine while my nexus s istalled CM10.
But after I install CM10.1 M2,I lost my USB connection.
I get the following when the cable is connected: "USB device not recognized".
I tried on different computers and usb cables then got same "USB device not recognized".
After I google that, They said install an app called "USB Switcher". Open it and clicked change to mass storage
and reboot. Then my computer still said "USB device not recognized".
I found the cyanogenmod official forum. There was a man got same proble. I post my story.
but did not get reply.
I thought it may be a bug with MTP transfer mod.
But I did got more information about that.
I thought it may be a bug for CM10 ,but now I intalled CM10 MOD from CM10 M2 TO RC5. Still got same thing.
So I come here for help.
Thanks in advance for any suggestions.
Click to expand...
Click to collapse
i son't think it's rom related, i had the same issue with others rom, i asked here but nobody answered me... anyway i found that if you pullout battery then go in recovery fix permission and reboot it starts working again... i think it's some kind of error in the file system, propably the best solution would be to format the partition deleting all data on SD... i'm not able to understand what caused this, one thing i did, but i don't know if it's related, was using LAGFIX and trimming system and data... u can try to mount USB from recovery and see if that works, what recovery are you using ???
kriout said:
i son't think it's rom related, i had the same issue with others rom, i asked here but nobody answered me... anyway i found that if you pullout battery then go in recovery fix permission and reboot it starts working again... i think it's some kind of error in the file system, propably the best solution would be to format the partition deleting all data on SD... i'm not able to understand what caused this, one thing i did, but i don't know if it's related, was using LAGFIX and trimming system and data... u can try to mount USB from recovery and see if that works, what recovery are you using ???
Click to expand...
Click to collapse
My recovery is ClockworkMod Recovery v6.0.3.1
I got a way from cm forum。 They said pullout the battery and hit power button random then it will work。But that didn·t help。
I tried your method fix permissions. reboot... IT`s did not work. I try to recheck the USB DEBUG MODE。 It's reboot ...
after all. Noting changed...
I will backup my phone. And try to repartition .and install the latest CM 10.1.0 http://get.cm/get/8Li .
that one is the last cwm recovery and usb mount doesn't work in that ... try last philz touch recovery u can find it here http://d-h.st/users/philz_touch/?fld_id=16784#files and try again, try mounting usb from recovery and see if it works, try flashing another kernel and fix permission againg, it may works the second or third time maybe ...
How to use this Philz Touch recovery?
Hi Kriout, I am unable to access my phone from my computer for about a week now. Earlier it was working fine. I tried resetting the usb ports by uninstalling and re-installing them. only once myphone (Nexus s I9020) is recognized as an unknown device but Windows 7 unable to update the drivers or find them for this device.
If I want to even go back to stock rom ( I am currently using Avatar ROM 4.2.2(android) ) as i am unable to access my phone via computer.
I tried going back to older updates of Avatar Rom to see if its the ROM which might be the issue, but that didn't work either.
I tried mounting the USB/SD via the bootloader but no use.
Can you help me please?
Vijay
paydy12 said:
Hi Kriout, I am unable to access my phone from my computer for about a week now. Earlier it was working fine. I tried resetting the usb ports by uninstalling and re-installing them. only once myphone (Nexus s I9020) is recognized as an unknown device but Windows 7 unable to update the drivers or find them for this device.
If I want to even go back to stock rom ( I am currently using Avatar ROM 4.2.2(android) ) as i am unable to access my phone via computer.
I tried going back to older updates of Avatar Rom to see if its the ROM which might be the issue, but that didn't work either.
I tried mounting the USB/SD via the bootloader but no use.
Can you help me please?
Vijay
Click to expand...
Click to collapse
- you should first try to understand if it's a driver problem or a smartphone problem, try to mount USB on other pc
- if they doesn't work you should try to mount it in recovery, use TWRP, an old CWM ( in the last one this function doesn't work) or the philz recovery that u find here http://d-h.st/users/philz_touch/?fld_id=16784#files, try to fix permission, wipe cache and dalvik and pullout battery alos several time if it doesn't work. i found out that for me pulling out battery entering recovery fixing permission, shut down, pull out battery entering recovery and mounting USB often worked... you can try also using different kernel,
- my idea is that the problem is an error in the SD file system so propably the best solution could be formatting the unity from the smartphone itself. i still didn't do it but i made a good cleanup of all folder, even the system file and system folder, leaving jjust music photo and download...
- if everything works in recovery but not in the rom, it could be a kernel or a rom problem, so first change the kernel, if doesn't work make a clean install of something else ... i'm using MIUI v5 with marmite 8.7bigmem and for now everything started working again ...
Thanks
kriout said:
- you should first try to understand if it's a driver problem or a smartphone problem, try to mount USB on other pc
- if they doesn't work you should try to mount it in recovery, use TWRP, an old CWM ( in the last one this function doesn't work) or the philz recovery that u find here....... try to fix permission, wipe cache and dalvik and pullout battery alos several time if it doesn't work. i found out that for me pulling out battery entering recovery fixing permission, shut down, pull out battery entering recovery and mounting USB often worked... you can try also using different kernel,
- my idea is that the problem is an error in the SD file system so propably the best solution could be formatting the unity from the smartphone itself. i still didn't do it but i made a good cleanup of all folder, even the system file and system folder, leaving just music photo and download...
- if everything works in recovery but not in the rom, it could be a kernel or a rom problem, so first change the kernel, if doesn't work make a clean install of something else ... i'm using MIUI v5 with marmite 8.7bigmem and for now everything started working again ...
Click to expand...
Click to collapse
Here's what i Did. I did install Philz touch recovery. Its very useful. I also installed the Nexus Root Toolkit (NRT). Using NRT I launched the USBDeview. Using this i removed all the google related drivers from the system. I then restarted my phone is bootloader mode and restarted my system as well. Now my System was trying to install the nexus S drivers but unfortunately it said that the device in disconnected. But then in bootloader mode i put the phone in Mount USB storage mode and VOILA i was able to see all my files. I did take a quick back up . But still in the normal mode i was not getting the USB Storage prompt. Now i went back to the bootloader and did a factory reset. and then installed the Latest Avatar ROM. and now I am able to access the Phone storage through my computer.
I am not sure if i had deleted some files by mistake or some other issue. And thank for referring the Philz Touch Recovery. Its great.
Now am thinking of installing the Stock ROM for NEXUS S back on to my Phone. Do you think its a good Idea?
Thanks for all the help mate.
paydy12 said:
Here's what i Did. I did install Philz touch recovery. Its very useful. I also installed the Nexus Root Toolkit (NRT). Using NRT I launched the USBDeview. Using this i removed all the google related drivers from the system. I then restarted my phone is bootloader mode and restarted my system as well. Now my System was trying to install the nexus S drivers but unfortunately it said that the device in disconnected. But then in bootloader mode i put the phone in Mount USB storage mode and VOILA i was able to see all my files. I did take a quick back up . But still in the normal mode i was not getting the USB Storage prompt. Now i went back to the bootloader and did a factory reset. and then installed the Latest Avatar ROM. and now I am able to access the Phone storage through my computer.
I am not sure if i had deleted some files by mistake or some other issue. And thank for referring the Philz Touch Recovery. Its great.
Now am thinking of installing the Stock ROM for NEXUS S back on to my Phone. Do you think its a good Idea?
Thanks for all the help mate.
Click to expand...
Click to collapse
i don't think the stock rom is the best rom ... it depends on what you need ... by the way what is your data transfer rate ( into the SD )??? me in recovery get a good speed with a lot of spike, it transfer data at 5 mbs with spike of 15 and sometime go to 0 ... when i mount USB on the rom i get an almost constant 1.5 mbs that is reaaaaaaally slow ... if i test the write speed using the phone it returns me a normal speed...
p.s. when u say u mount USB in bootloader, u mean on recovery ?
I did a really, really dumb thing a few months ago. I flashed a wrong something or another to fix an issue I had with my keyboard crashing after flashing another wrong thing..
Anywho, I couldn't get the damn keyboard to stop crashing for the life of me, so I set out to FORMAT/ CLEAR EVERYTHING ON MY PHONE. Yikes.
At this point, I can boot into recovery(CWM) and DL mode, but my PC will not recognize my phone at all. I installed your S3 toolkit v7.0, hoping it would help, but nay.
I cannot boot fully into Android to allow usb debugging, etc.
I can mount and unmount internal sd, cache, etc, but no drivers are being installed because it is not being recognized.
I've uninstalled Kies, etc.
HALP!HALP!
Daniel_NC said:
I did a really, really dumb thing a few months ago. I flashed a wrong something or another to fix an issue I had with my keyboard crashing after flashing another wrong thing..
Anywho, I couldn't get the damn keyboard to stop crashing for the life of me, so I set out to FORMAT/ CLEAR EVERYTHING ON MY PHONE. Yikes.
At this point, I can boot into recovery(CWM) and DL mode, but my PC will not recognize my phone at all. I installed your S3 toolkit v7.0, hoping it would help, but nay.
I cannot boot fully into Android to allow usb debugging, etc.
I can mount and unmount internal sd, cache, etc, but no drivers are being installed because it is not being recognized.
I've uninstalled Kies, etc.
HALP!HALP!
Click to expand...
Click to collapse
If you boot into DL mode and run odin on your PC does it fail to see the device?
apacseven said:
If you boot into DL mode and run odin on your PC does it fail to see the device?
Click to expand...
Click to collapse
I'm waiting on my PC to free up again(currently on a Mac). I had not tried Odin because in the past I was unable to mount internal SD, which I understood was keeping it from being recognized. I instead thought the Toolkit would do the trick automatically, though I most likely had the wrong idea. Everything is mountable again (for some odd reason), so I will give it a go.
Could I accomplish downloading drivers and flashing rom to device using Odin alone? Or should I use the Toolkit?
Thanks!
Daniel_NC said:
I'm waiting on my PC to free up again(currently on a Mac). I had not tried Odin because in the past I was unable to mount internal SD, which I understood was keeping it from being recognized. I instead thought the Toolkit would do the trick automatically, though I most likely had the wrong idea. Everything is mountable again (for some odd reason), so I will give it a go.
Could I accomplish downloading drivers and flashing rom to device using Odin alone? Or should I use the Toolkit?
Thanks!
Click to expand...
Click to collapse
Installing the drivers is independent from using odin. Install the drivers on the PC, fire up odin, connect phone (that has been booted into DL mode) and see if it connects. If it does, just flash a stock image and you are back in business.
You can use this driver http://d-h.st/vMk
apacseven said:
Installing the drivers is independent from using odin. Install the drivers on the PC, fire up odin, connect phone (that has been booted into DL mode) and see if it connects. If it does, just flash a stock image and you are back in business.
You can use this driver ...
Thanks!! I'll give it a shot now.
Click to expand...
Click to collapse
apacseven said:
Installing the drivers is independent from using odin. Install the drivers on the PC, fire up odin, connect phone (that has been booted into DL mode) and see if it connects. If it does, just flash a stock image and you are back in business.
You can use this driver......
Click to expand...
Click to collapse
Odin is not recognizing the device. Should I unmount or mount anything on the device for this to work properly? I have drivers installed.
Morning all,
This is my first post, and I know this may have been asked a thousand times, however, I have searched the forum before asking this question.
I decided to root my Sony Z3, but have now ran into 'serious' issues.
I followed the steps to the T, or thought I did but now have a Sony phone that is stuck on the SONY load screen, and will only boot using TWRP and with only TWRP installed, and no OS. When I connect this to the pc, the only folder in internal storage in the TWRP folder, everything else has gone.
I managed to install Android Studio, the SDK, USB driver and also platform tools. I have also successfully installed TWRP, I also tried to install SUPERSU, but this completes in about 2 seconds if that, and then I'm back to square one.
Luckily there is nothing in the phone I actually need, no pics, files etc. But I have tried to install custom roms with no luck. They always fail, I can get as far as copying this to the phone, using TWRP to install, then it shows the no MD%5 file found, or that it's for D6603 or whatever.
I've clearly done something wrong, and I'm not sure how to recover this, if indeed I can at all. i'm assuming that since I can boot into TWRP, it is fixable, but there is no OS, and i'm struggling to install one.
Even though I think I have installed SUPERSU, when I re-boot it says your device is not rooted, SUPERSU is not installed?
Any help would be highly appreciated, and apologies if this has been asked a million times before.
Cheers
Jay
JayRams said:
Morning all,
This is my first post, and I know this may have been asked a thousand times, however, I have searched the forum before asking this question.
I decided to root my Sony Z3, but have now ran into 'serious' issues.
I followed the steps to the T, or thought I did but now have a Sony phone that is stuck on the SONY load screen, and will only boot using TWRP and with only TWRP installed, and no OS. When I connect this to the pc, the only folder in internal storage in the TWRP folder, everything else has gone.
I managed to install Android Studio, the SDK, USB driver and also platform tools. I have also successfully installed TWRP, I also tried to install SUPERSU, but this completes in about 2 seconds if that, and then I'm back to square one.
Luckily there is nothing in the phone I actually need, no pics, files etc. But I have tried to install custom roms with no luck. They always fail, I can get as far as copying this to the phone, using TWRP to install, then it shows the no MD%5 file found, or that it's for D6603 or whatever.
I've clearly done something wrong, and I'm not sure how to recover this, if indeed I can at all. i'm assuming that since I can boot into TWRP, it is fixable, but there is no OS, and i'm struggling to install one.
Even though I think I have installed SUPERSU, when I re-boot it says your device is not rooted, SUPERSU is not installed?
Any help would be highly appreciated, and apologies if this has been asked a million times before.
Cheers
Jay
Click to expand...
Click to collapse
Ok man... relax.... it's not serious .
If your bootloader is locked , install PC Companion and *simply* repair :good: ( Or you can use flashtool to flash stock ROM )
If it is unlocked , lock using flashtool and repair with PC Companion .
This is a mild type of soft brick . As I can see , you didnt backup before trying to install the ROM , right ? ALWAYS , ALWAYS backup before installin anything root-related to your phone
Hope this helped :laugh: Good Luck and remember , that's not serious , it's just a little softbrick
Duplicate.
http://forum.xda-developers.com/z3/help/sony-z3-d6653-root-issue-t3137149
So after trying to find a straightforward guide for installing the USB drivers for my OPO, almost every link says to use the OnePlus One toolkit, so I followed the 'manage drivers' section of the toolkit but for some reason, whenever I come to use my phone with my PC, the drivers seem to wipe themselves out! After I've done the initial driver installation, everything works fine, but after a day or 2, when when I plug my phone in, it will show 'unknown device' or it will show 'A0001' but with an exclamation mark next to it in the device manager and my phone isn't recognized. I'm using windows 7 x64 and the original red OPO cable.
I must be doing something wrong with these drivers, does anyone have a guide for deleting old drivers and reinstalling drivers for the OPO?
Edit: Ive reinstalled them again using the toolkit guide but I dont know if they will keep again, either way, im flashing blisspop now, maybe its an issue with 5.0 stock rom or something?
donk165 said:
So after trying to find a straightforward guide for installing the USB drivers for my OPO, almost every link says to use the OnePlus One toolkit, so I followed the 'manage drivers' section of the toolkit but for some reason, whenever I come to use my phone with my PC, the drivers seem to wipe themselves out! After I've done the initial driver installation, everything works fine, but after a day or 2, when when I plug my phone in, it will show 'unknown device' or it will show 'A0001' but with an exclamation mark next to it in the device manager and my phone isn't recognized. I'm using windows 7 x64 and the original red OPO cable.
I must be doing something wrong with these drivers, does anyone have a guide for deleting old drivers and reinstalling drivers for the OPO?
Edit: Ive reinstalled them again using the toolkit guide but I dont know if they will keep again, either way, im flashing blisspop now, maybe its an issue with 5.0 stock rom or something?
Click to expand...
Click to collapse
I had similar issue with lollipop ROMs, didn't find any solution except flashing fastboot images of CMOS12 or simply downgrading to CM11S.
Mr hOaX said:
I had similar issue with lollipop ROMs, didn't find any solution except flashing fastboot images of CMOS12 or simply downgrading to CM11S.
Click to expand...
Click to collapse
Fair enough, well i'm thinking I may move back to CM11S if things don't work out on Blisspop. If I turn off USB debugging and then switch to camera (PTP) mode and then back to MTP mode, my phone then connects fine. I wanted it to connect so I could copy my Titanium backup files off the phone and onto the PC. In the end, my mate told me about Airdroid and I managed to download them through that as a ZIP file. For some reason, the titanium backup folder isn't visible from your computer, I tried copying it to the DCIM folder and it just gave me a 1kb file. I also tried a new folder called backups and it was empty when I looked on my PC, but the files were visible when using Airdroid and also when I used a file browser on my phone.
Weird stuff!
Just wanted to bump this and see if anyone has a solution or even just an explanation.
Whenever I plug my OPO into my PC (with the original cable), the device, A0001 is found but is shown in Device Manager with an exclamation point. If I then right click on it and chose uninstall, and then reconnect the phone, it will connect and work fine for MTP/PTP modes. If I put USB debugging on, the MTP doesn't always work after. But no matter what, if I shutdown my PC, and then come to connect the phone the next day etc, I have to do the uninstall of the driver then reconnect for MTP to work. Pretty frustrating!
Anyone know why the phone isn't remembered by my PC correctly? I'm on Windows 7 x64 if that means anything.
I'm moving back to stock ROM soon so I'll see then if its something to do with the unlocked bootloader or using a custom ROM. I'll report back if I have any luck
Bumping this again, its still the same on 6.0. I don't fancy moving back to stock ROM, I like CM over Cyanogen OS, but this problem is really frustrating. Every single time I connect the phone to the PC, it will come up as A0001 but with an exclamation mark next to it in Device Manager, if I right click and uninstall the driver, then reconnect the phone, it works fine then. But if I restart my PC, it does the same thing where it cant find the right driver for the phone.
Is there anything I can try to fix this?
Hi guys hopefully I posted this in the right place. I have a rooted Nexus 5 with multirom installed and had a few ROMs in mind that I wanted to try out, most of them just installed simply and booted without problems however when I chose to try and install slimrom or another (can't remember the name of the other ROM sorry) a message would appear stating I need to install a different bootloader IMG to install/ boot that ROM. I searched around for a while and found an image to install through twrp but when I installed it I now can't boot the phone to launch a ROM or get into recovery mode as the screen will go black. Any ideas? I'm trying to used adb to install a twrp img but so far it doesn't detect the device :/ I would much appreciate any help or suggestions! Ask me if you have any questions! Thanks.
Have tried to flashing back to a completely stock rom?
Problem is I can't get my computer to recognize my nexus 5 in the boot loader mode if I could I could then flash twrp again and flash the stock rom but it doesn't detect
Does the phone boot into fastboot mode? You tried different USB ports, cables, computers, and operating systems?
The only mode I can get my Nexus into is boot loader mode so yes fast boot. I have a windows xp and 8 so I use 8 as its the only PC that I can run adb & fast boot on without problems. I have used a USB cord the recognized my sisters phone also so it shouldn't be a faulty cable I'm pretty sure. Thanks for those ideas I appreciate your help a lot!
Rooted Droid said:
The only mode I can get my Nexus into is boot loader mode so yes fast boot. I have a windows xp and 8 so I use 8 as its the only PC that I can run adb & fast boot on without problems. I have used a USB cord the recognized my sisters phone also so it shouldn't be a faulty cable I'm pretty sure. Thanks for those ideas I appreciate your help a lot!
Click to expand...
Click to collapse
Use the cable that came with the phone.
Use this well made thread
http://forum.xda-developers.com/google-nexus-5/general/tutorial-how-to-flash-factory-image-t2513701
I once wiped my system and rebooted and got stuck in a loop. at his thread is what I used to save my phone. Hope it helps.
Sent from my Nexus 5 using Tapatalk
Speaking from personal experience, I found that the USB cable could make a difference. I also have Samsung phones and, although the USB cable allowed win7 to install drivers, I could never flash anything. Once I switched back to the original cable, flashing works without any problems.
tahnks guys i managed to fix my problem using the nexus in bootloader mode on Windows 7 as windows 8 and xp wouldn't recognize it for some reason. From there i managed to install twrp reset the device, flash theserurection remix rom and flash a correct bootloader. Thanks for your help as it lead me in the right direction!