Kernel's - Samsung Galaxy S II Plus

mosh kernel 1,9 in liquid rom not work correctly. I flash kernel,wipe check partition, reboot phone and everything go in force close, play store vibber and other apps.
Sent from my GT-I9105 using XDA Free mobile app

gentr said:
mosh kernel 1,9 in liquid rom not work correctly. I flash kernel,wipe check partition, reboot phone and everything go in force close, play store vibber and other apps.
Sent from my GT-I9105 using XDA Free mobile app
Click to expand...
Click to collapse
I got huge battery drain issue with mosh 1,90 so i use 1,86
Sent from my GT-I9105P using XDA Premium 4 mobile app

rs tony said:
I got huge battery drain issue with mosh 1,90 so i use 1,86
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It is the bln wakelock. I enabled it in 1.9 to fix bln led flickering. To disable it type this in terminal as root:
echo 0 > /sys/class/misc/backlightnotification/wakelock
It needs to get done after every boot, so it's easier to setup an init.d script
Sent from my GT-I9105P using XDA Premium 4 mobile app

CoolDevelopment said:
It is the bln wakelock. I enabled it in 1.9 to fix bln led flickering. To disable it type this in terminal as root:
echo 0 > /sys/class/misc/backlightnotification/wakelock
It needs to get done after every boot, so it's easier to setup an init.d script
Sent from my GT-I9105P using XDA Premium 4 mobile app
Click to expand...
Click to collapse
@CoolDevelopment
Nope, if u saw my comment in ur mosh theard, when poweroff my phone for 3mins, and open it again my battery status drained 63%->25%, and this is not happened in 1,86. And my phone stuck at bootanimation in 1,90 when i am powered my phone off for 3min. And that case i have to wipe dalvik/cashe. And this is not too happened in 1,86. I though problem was in my init'd scripts(got alot of them) but no, no problem with 1,86 and same scripts.
And that 00frandom script, what comes in ur kernel, enthropy values is really slow with it, and crossbreeder's enthropy generator doesn't work with 00frandom script. Crossbreeder works without that.

rs tony said:
@CoolDevelopment
Nope, if u saw my comment in ur mosh theard, when poweroff my phone for 3mins, and open it again my battery status drained 63%->25%, and this is not happened in 1,86. And my phone stuck at bootanimation in 1,90 when i am powered my phone off for 3min. And that case i have to wipe dalvik/cashe. And this is not too happened in 1,86. I though problem was in my init'd scripts(got alot of them) but no, no problem with 1,86 and same scripts.
And that 00frandom script, what comes in ur kernel, enthropy values is really slow with it, and crossbreeder's enthropy generator doesn't work with 00frandom script. Crossbreeder works without that.
Click to expand...
Click to collapse
How did you test random generator performance?
Read the crossbreeder script, frandom is much faster than urandom(which is unsafer and gets used by crossbreeder). If you use crossbreeder to replace random with frandom, it does not make any difference

CoolDevelopment said:
How did you test random generator performance?
Read the crossbreeder script, frandom is much faster than urandom(which is unsafer and gets used by crossbreeder). If you use crossbreeder to replace random with frandom, it does not make any difference
Click to expand...
Click to collapse
I know. I installed pimp my rom to check my enthropy level, and enthropy was under to 300. Then i flashed crossbreeder, and it was still under to 300 and i thought why. Then i found that frandom script and removed it, then rebootet. My enthropy increase up to 4000(max 4096). Some times with ur 00frandom script and with crossbreeder script, my enthropy values was up to 4000, but usually it stuck under to 300. But now without that frandom script, my enthropy level is always up to 4000.

rs tony said:
I know. I installed pimp my rom to check my enthropy level, and enthropy was under to 300. Then i flashed crossbreeder, and it was still under to 300 and i thought why. Then i found that frandom script and removed it, then rebootet. My enthropy increase up to 4000(max 4096). Some times with ur 00frandom script and with crossbreeder script, my enthropy values was up to 4000, but usually it stuck under to 300. But now without that frandom script, my enthropy level is always up to 4000.
Click to expand...
Click to collapse
Just make read_wakeup_threshold and write_wakeup_threshold in /proc/sys/kernel/random higher
Sent from my GT-I9105P using XDA Premium 4 mobile app

Related

[CWM][SCRIPT][Tweaks]LagFreeV2-Major-Update[One Script To Roll Them ALL][Upd11March]

Introduction:
Throuth Releasing SlaidMod and SlaidFastMOD (For the Galaxy ACE and GIO)
,I was studing THe ANDROID OS Core ,and I found That It Shouldn't Be cofugured Like a Linux,Because It's Not A computer That have a lot of RAM,It is Just a phone!!Well Today I came with a new script That will handle Your Phone Very Well!!
Improvements:
-MinFree enabled
-Zipaligning apps while Booting
-Dalvik VM heapSize set to:48Mb
-Less aggressive settings for kernel
-Turbo Charged,Makes The launcher very smooth!!
-Better VM management
-Handled Dalvik cache
-New way of loading Binaries
-system tweaks
-Battery Life improvements
-Better Multitasking
-Database Tweaks
-SC-LCD Tweaks
Requirements:
-Android Gingerbread 2.3.x
-Root
-Kernel that supports init.d (like CF-Root ,UC,Verrut and CM7 kernels)
-Ext4 system partition
How to install:
1-you need to have CWM4 or 5 installed
2-Download the flashable Zip
3-Reboot into recovery
4-Install Zip from SD card then choose Zip from SD card then choose
LagFree......Zip
5-reboot and enjoy
6-Happy testing
7-If You Feel That the script is not Working,Please Fix permissions to all Via Root-explorer
Credits:
-Thanks to Sakindia123 as i used Some Few Lines from His Script
-ThanKs to all the XDA community that helped me!!
ChangeLog of Version2:
-Major Update
-rewrited the Script
-Fixed Errors
-Optimized
-Added LagFree recovery
-CWM Flashable Zip
Reserved for Future use too
nice one.. downloading.. gonna try on miui v8..
Can we use this with thunderbolt script? Will it clash? Thanks.
Sent from my GT-I9003 using xda premium
slaid480 This is your tweaks or Cranium tweak's ?
View attachment 895757
chefaujus said:
Can we use this with thunderbolt script? Will it clash? Thanks.
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
i don't think it Will Crash Since thunderBolt is an overall System tweaks and Mine is a RAM script So you can try it!!
TheFrankenstain said:
slaid480 This is your tweaks or Cranium tweak's ?
View attachment 895757
Click to expand...
Click to collapse
Ah I just Used The latest lines (3 or4 )I Like it his Tweaks So I used one Of them That's All!!
slaid480 said:
Ah I just Used The latest lines (3 or4 )I Like it his Tweaks So I used one Of them That's All!!
Click to expand...
Click to collapse
Ok! Thank you
TheFrankenstain said:
Ok! Thank you
Click to expand...
Click to collapse
You're Welcome Dude !
Should we remove the other file/s present in that folder? I've 00tweaks file present in two places....
/etc/init.d and system/etc/init.d
Should I replace it in both places?
Sent from my GT-I9003 using Tapatalk
Can we use it in miui v8 ?
Sent from my GT-I9003 using xda premium
Hello. Does this have phone specific tweaks, or can this be used in other phones too?
Sent from my Derp using XDA Herp
julle131 said:
Hello. Does this have phone specific tweaks, or can this be used in other phones too?
Sent from my Derp using XDA Herp
Click to expand...
Click to collapse
It is Optimized For 512HB Devices(400-512 RAM)But you can try it but result May differt us the hardware change!!
mustali said:
Should we remove the other file/s present in that folder? I've 00tweaks file present in two places....
/etc/init.d and system/etc/init.d
Should I replace it in both places?
Sent from my GT-I9003 using Tapatalk
Click to expand...
Click to collapse
Just put it in One Place!!
anna0811 said:
Can we use it in miui v8 ?
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
yes you can,just if you read the OP I said C kerenls too and MIUI use a CM kernel!
Actually, it will clash with ThunderBolt! as it is setting some of the tunables that ThunderBolt! also sets. :/
AFAIK all of the tunables in here are already in ThunderBolt! (using ThunderBolt!'s values though).
slaid480
Good job dude. Just a little question. Does it clash with options in tweak app (options like like ram min free, i/o schedular etc) which get installed with UC doomlord's kernel?? Also I have a small problem. I have observed that many times my some apps get auto closes automatically while doing multitasking. Can u make a script which will help me to keep apps open in background until I close it manually??
Thank You...!!
it is only 12k. why zip it?
vishal24387 said:
slaid480
Good job dude. Just a little question. Does it clash with options in tweak app (options like like ram min free, i/o schedular etc) which get installed with UC doomlord's kernel?? Also I have a small problem. I have observed that many times my some apps get auto closes automatically while doing multitasking. Can u make a script which will help me to keep apps open in background until I close it manually??
Thank You...!!
Click to expand...
Click to collapse
First to Avoid Any Clash Disable Zipalign+RAM script in Tweaks app and for The closed Apps while Multitasking is due to the LMK(Low Memory killer),you can use you're phone without My script Because The I9003 had 487 of RAM witch Make it Less Lags and an other think this script is made for heavy users or the ones who want to say good bye to lags !!

[Package][SCRIPTS][Tweaks][SGS]LagFreeV2.1[Upd:30March]

Introduction:
Well,After Some Devices Like the Galaxy ACE,SGS-SCLD,Fit and Gio today I present to You the Newer version of LagFree For SGS I9000 and It's Variants!
Lagfree Is not Just a RAM Manager It a Complete Script With a lot of Tweaks and Iprovements
Improvements:
-MinFree enabled
-Touchscreen sensivity increased
-Zipaligning apps while Booting
-Less aggressive settings for kernel
-Better VM management
-system tweaks
-Battery Life improvements
-Better Multitasking
-Database Tweaks
-Wi-Fi and NetWork Tweaks
-Kernel Tweaks
-A Lot More!!
Requirements:
-Android Gingerbread 2.3.x or Higher
-Root
-Kernel that supports init.d (like CF-Root,Semaphore,etc...)
-Ext4 lagfix if you want to use the remount script
How to install:
1-you need to have CWM4 or 5 installed
2-Download the flashable Zip
3-Reboot into recovery
4-Install Zip from SD card then choose Zip from SD card then choose
LagFree......Zip
5-reboot
6-Using Root Explorer Go to system/etc/init.d and Fix Permission to All for S91Supercharger and S95LagFree ,then Reboot and Enjoy!!
Credits:
-Thanks to The Great Scripter In SGS and XDA Community:
*Pikachu01
*Zeppelinrox
*Juwe11
-A Big Thanks to broodplank1337 For Helping Me a lot!!!
-Thanks to ChainFire Too for the TouchScreen sensivity Valories
-Any XDA Member That helps Me out in This Project
ChangeLog of All versions:
Changelog of All Versions:
-V1:Initial release of lagFree For SGS
-V1.1:
-Rewritted Script,(Major Update)
-Fixed errors,repetetion
-Optimized
-Reduced script size from 38Kb to 10Kb
-Add LagFree recovery
-V1.2:
-Fixed Issue That Make th script stoping when there is an error
-Fixed More Errors
-Added more Build.prop Tweaks on the Script
-V1.3:
-Compatible With Supercharger V6 and thunderBolt(LMK addon only)Use atteched File Witch is compatible
-Deleted very agressive Parameter in the script
-V1.4:
-Fixed Error:sys/Block/stl* and sys/block/bml*
-adjusted Build.prop Tweaks For SGS and It variants
-V2:
-Major Update
-Version Compatible With SGS and All it variants including SGS+
-LagFree Now is a Package
-Including a Tweaked Version of SuperChargerV6
-Automatic Zipalign Fixed
-SD card readahead is 3072Kb
-TouchScreen sensivity is in a New Script
-Fixed All Errors
-V2.0.1:
-Deleted LagFree Recovery as It was Only an experimental Feature
-Balanced Low Memory Killer Parameter Valories
-Many others Smalls improvements For Speed and Battery life
-V2.1:
-SDCardspeedfix is now on a new Script
-New tweak to remove lag when answering phone calls
-Fixed same small few issue
Reserved 2
Is it comlitable with ICS roms?
id_snake said:
Is it comlitable with ICS roms?
Click to expand...
Click to collapse
yes It's compatible With ICS Roms, If you Just read The OP,I said android 2.3.x or Higher
id_snake said:
Is it comlitable with ICS roms?
Click to expand...
Click to collapse
i agree. is it? haha
darkace007 said:
i agree. is it? haha
Click to expand...
Click to collapse
Yes!It is !!!
Will this make my phone dual core?
(Joke) thanks for the script
Sent from my SGH-I897 using XDA
slaid480 said:
Yes!It is !!!
Click to expand...
Click to collapse
THANKS! will try it out later hehehe. sorry didnt read the previous post haha. thanks man!
Ok I know this is probably a noob question. I apologize.
It's this a kernel? If not how does it work with a kernel like glitch, And ics?
I guess I need a little more info on how it works.
Sent from my GT-I897 using xda premium
shaker2k said:
Ok I know this is probably a noob question. I apologize.
It's this a kernel? If not how does it work with a kernel like glitch, And ics?
I guess I need a little more info on how it works.
Sent from my GT-I897 using xda premium
Click to expand...
Click to collapse
It's not a kernel but these are actually scripts which run when you start up your phone, and contain some code / commands which help your phone perform better. They need a kernel which is compatible with these scripts or is able to run these at startup. The kernel creates a folder called init.d, these scripts when you flash get copied to this folder and are executed at startup.
If you have used Semaphore kernel in any of the GB roms, you may have used the semaphore kernel settings, those settings did the same thing, they used to execute the scripts at startup and make our phones more awesome.
This flashable scripts will do the same thing.
anishmahadikz said:
It's not a kernel but these are actually scripts which run when you start up your phone, and contain some code / commands which help your phone perform better. They need a kernel which is compatible with these scripts or is able to run these at startup. The kernel creates a folder called init.d, these scripts when you flash get copied to this folder and are executed at startup.
If you have used Semaphore kernel in any of the GB roms, you may have used the semaphore kernel settings, those settings did the same thing, they used to execute the scripts at startup and make our phones more awesome.
This flashable scripts will do the same thing.
Click to expand...
Click to collapse
Thanks for Helping Him to understand How scripts Work
slaid480 said:
Thanks for Helping Him to understand How scripts Work
Click to expand...
Click to collapse
Actually thank you sir to bring these for us here.
so is this ok or recommended to use with Glitch Kernel at all?
pchemerys said:
so is this ok or recommended to use with Glitch Kernel at all?
Click to expand...
Click to collapse
Glitch does support scripts, you can use it, but i am not qualified to recommend it to you.
pchemerys said:
so is this ok or recommended to use with Glitch Kernel at all?
Click to expand...
Click to collapse
yes,it's recommended as Glitch Kernel dosn't use any init.d script by default !!
Am on THS B16 with Stock Kernel..
One Thing i wanna say is That my Battery drain has been gone off completely.
B4 i had battery drain rapid from 100 to 90% within 30min, even in standby..
Now 1hr 5min my battery is at 99%
Havent checked more.. Will Keep updating as i see a difference
By the Way. My Ram is about 90~70mb all time.. cant get more than 100
bondarun said:
Am on THS B16 with Stock Kernel..
One Thing i wanna say is That my Battery drain has been gone off completely.
B4 i had battery drain rapid from 100 to 90% within 30min, even in standby..
Now 1hr 5min my battery is at 99%
Havent checked more.. Will Keep updating as i see a difference
By the Way. My Ram is about 90~70mb all time.. cant get more than 100
Click to expand...
Click to collapse
About RAM,You need to Now That alot of apps= Less free RAM
V1.4 is Up
LagFree V1.4 is Up enjoy It!!
I did not think it was possible for my phone to be faster!
You guys continually amaze me!
Even with the vortex animations it's blazing fast!
Sent from my GT-I897 using xda premium

[TWEAK] AndroBot 0.3 [02-10-2013]

i wrote this script one by one since september just for my daily use only but now i decided to compile it all and make it as one then share it to you.. since there are many owesome tweaks here like Adrenaline and kuro i made my own tweak that compatible with the other tweaks., so you can use this with Adrenaline or Kuro
the main features of my tweak are:
Auto enable swap - this means that if you have swap partition with mmcblk0p3 it will auto enable else your 2nd partition (mmcblk0p2) will convert to swap and enable it as swap so make sure you dont have any link2sd or a2sd installed before using this..
cache to system - this means that your dalvik-cache will move to your system partition if it have 40mb free, so the performance was still remain..
brightness tweak - this will enable the lowest brightness of your device from 100% to 10% i think.. because the normal is until 20% only.
CPU tweak - i added this because i encountered that sometimes when i use application like nofrills and set it on boot then after rebooting the superuser sometimes too much delay to activate so the app will not work and got error.. in this method you can set your favorite settings on cpu without using any applications
zipalign - this is the most and common feature of any tweaks.. so i added it but it will only run if you are not using adrenaline or kuro
odexing application - i notice that stock rom is the best rom ever without any problem in performance or any lags on applications so i decided to odex the installed applications to boost its performance too
net boosting - this will speed up your IPv6 and IPv4
kernel tweak - setting up the proper settings on your kernel
DNS tweak - using google dns,sometimes it can bypass your network carrier to avoid blocking
ok i think its enough (my nose is bleeding)
NOTE: Before you proceed you must agree that i am not responsible if you damage your phone!
Requirements:
- Experienced in flashing zip file
- Usable brain
- Android Phone
Instruction:
- download the zip file
- go to CWM
- go to Mount and Storage
- mount your system an data
- then flash the zip file
after flashing just wait., it will reboot 2x that means its working.. so it is normal..
if you encounter force closing on application just reinstall it..
WARNING: again this is not compatible with a2sd or link2sd!!
sorry my english is bad lol
Packing Sand of a Beach!!!
Versions:
AnroBot 0.1
AnroBot 0.2
AnroBot 0.3
Change Log:
0.1
- first release!
0.2
- Added zram (auto activate depends on the kernel)
- Added Option with brightness and Odex data apks (you can now disable or enable it on boot)
- CPU setting moved to /data/AndroBot/system file to make it understandable
0.3
- fix compatibility issue for other kernel
- swap or zram disabled (but you can enable it by changing the command on "system" file inside /data/AndroBot)
Credits to:
- Darky
- mikstev
- modaco
- ayintis
- PinoyDen members
- and YOU
Packing Sand of a Beach!!!
Hi i want to check it but sadly i have link 2sd enabled. is there any other way to install it? Like, deleting swap partition from the zip file.
Sent from my GT-S5360 using xda premium
maxxinn said:
Hi i want to check it but sadly i have link 2sd enabled. is there any other way to install it? Like, deleting swap partition from the zip file.
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
yes! just delete the 97swapon inside /data/AndroBot/.script
Packing Sand of a Beach!!!
Thanks bro.
Sent from my GT-S5360 using xda premium
just like pimp my rom. but pimp my rom has more features.
anonymous27 said:
just like pimp my rom. but pimp my rom has more features.
Click to expand...
Click to collapse
yes its true
Can this tweak give me more free RAM? Coz idk now my RAM always becomes full under 50MB (this is not happened before) I use the scripts like before but kept
Thanks before Sir
Sent from my GT-S5360 using xda premium
anonymous27 said:
just like pimp my rom. but pimp my rom has more features.
Click to expand...
Click to collapse
sandyworsnop said:
yes its true
Click to expand...
Click to collapse
Then use PIMP YOUR ROM... very simple diba.
Nice work boss. :good:
Baskhara said:
Can this tweak give me more free RAM? Coz idk now my RAM always becomes full under 50MB (this is not happened before) I use the scripts like before but kept
Thanks before Sir
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
if you have swap partition or 2ndpartition then yes it will give you more ram
Packing Sand of a Beach!!!
rio. said:
if you have swap partition or 2ndpartition then yes it will give you more ram
Packing Sand of a Beach!!!
Click to expand...
Click to collapse
I have 1GB for 2nd partition with Link2SD installed, Will it be ok Sir?
Sent from my GT-S5360 using xda premium
Baskhara said:
I have 1GB for 2nd partition with Link2SD installed, Will it be ok Sir?
Sent from my GT-S5360 using xda premium
Click to expand...
Click to collapse
remove all the linked first before using this.
Packing Sand of a Beach!!!
rio. said:
remove all the linked first before using this.
Packing Sand of a Beach!!!
Click to expand...
Click to collapse
Installed without any problem thanks and yeah it works I think..
Btw how can I active OOM Kill Allocating Task to kill an app when it pass the max app running? (Like in CM it have Dev Tools n there's Max App Running feature)
Sent from my GT-S5360 using xda premium
just flashed....didnt notice any boost in performance
Sent from my GT-S5360 using xda app-developers app
---------- Post added at 01:55 PM ---------- Previous post was at 01:54 PM ----------
will adrenaline engine work with this?
Sent from my GT-S5360 using xda app-developers app
humaid.locastic said:
just flashed....didnt notice any boost in performance
Sent from my GT-S5360 using xda app-developers app
---------- Post added at 01:55 PM ---------- Previous post was at 01:54 PM ----------
will adrenaline engine work with this?
Sent from my GT-S5360 using xda app-developers app
Click to expand...
Click to collapse
yes!
Packing Sand of a Beach!!!
Hey I have no 2nd partition dose it work on my phone
Sent from my GT-S5360 using Xparent Blue Tapatalk 2
J-Man23 said:
Then use PIMP YOUR ROM... very simple diba.
Nice work boss. :good:
Click to expand...
Click to collapse
Wew another trashtalker.. haha.. how small the world is.. welcome guys.. astig nyo!
-codedmd-
Ravitaneja said:
Hey I have no 2nd partition dose it work on my phone
Sent from my GT-S5360 using Xparent Blue Tapatalk 2
Click to expand...
Click to collapse
yes!
Packing Sand of a Beach!!!
kentoi me said:
Wew another trashtalker.. haha.. how small the world is.. welcome guys.. astig nyo!
-codedmd-
Click to expand...
Click to collapse
hahaha ignore us bro..
Packing Sand of a Beach!!!

Extreme lag fix

Hello. I found this tweak made by a fellow xda member. Check it out
Originally by TheBlackWolf
I just copied what he wrote
Here is what he wrote:
I had made a package of tweaks found at many places on xda and repacked in one zip.
It also Includes Adrenaline boost.
This tweak is tested on CM7 ROM(Having kernel with init.d support)
CONFIRMED WORKING ON GB/ICS/JB ROMS.
This tweak optimizes Ram and manages efficiently.
Heavy apps loads easily like chrome,HD game,etc
GAMERS now enjoy lagfree gaming.
The Extreme version is most efficient script ever made.
Almost added all the tweaks available on xda.
This Tweak Package Includes
-Built.prop tweaks
-Adrenaline Boost
-Adrenaline TaskManager
-Sqlite Optimizing/Vacuum
-Increase touch Sensitivity
-Zipalign on every reboot
-Battery Saving Tweaks
-VMLagTuner
-Some My tweaks
-MUCH better Ram usage
-Cache Cleared at every boot
-SD speed tweak
-Logger removed
-Better browser performance
-Sysctl tweaks
-Added modified Zram script
-Better battery life
-Faster GUI
-xbin Tweaks
-Loopy smoothness tweak
-Faster Networking
-Smoother LWP animation
-Kernel Tweaks
-Better gaming performance
-Seeder Entropy Generator added
Installation
1)Reboot into recovery
2)Mount /system & /Data
3)Wipe Cache & dalvik Cache
4)Install Zip
5)Fix premissions
6)Reboot
NOTE:
HAVE A NANDROID BACKUP.
1st Boot Takes some time.
How to Use It Adrenaline Boost Script?
1) Open terminal emulator
2) Type :
Code:
su
boost
How to Use It Adrenaline Task Manager?
1) Open terminal emulator
2) Type :
Code:
su
tm
How to Use Seeder?
1) Open terminal emulator
2) Type :
Code:
su
seeder
Credits;-
-alireza7991 for hisTweaks
-Imbawind for Adrenaline boost and Taskmanager
-LENAROX for VMLagTuner
-emwno(for his tweaks)
-lpy (loopy smoothness tweak)
-pikachu01 (internet tweak)
-slaid480 (parameters / min free values from script)
-foreversupra (scripts from his fugutweak)
-lambgx02 for rngd script
-TheBlackWolf (ME for my tweaks)
-Ryuinferno for Guiding me.
Hit Thanks If you feel the Change...:highfive:
Link here:
http://forum.xda-developers.com/showthread.php?t=2068843
There is a flashable zip. I tried it but it did not work. It will show that the flash was successful but it won't work. You will have to put all the files on your own. Confirmed that it works on CM10 alpha 4
Sent from my GT-I9003 using xda app-developers app
can you give me a screenshot in benchmark
It doesn't increase benchmark scores. It only decreases lag.
Sent from my GT-I9003 using xda app-developers app
mathew1234 said:
It doesn't increase benchmark scores. It only decreases lag.
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
maybe it's increase the 2D or 3D
will it work on cm10..??
samgsl said:
will it work on cm10..??
Click to expand...
Click to collapse
READ THE OP it's only for CM10
Sent from my GT-I9003 using xda premium
It works on cm7 , cm9,and cm10, with init.d support. Its confirmed.
Sent from my GT-I9003 using xda app-developers app
Like to ask, how to install it without flash on Galaxy SL? I don't want a bootloop any more (It's already stalking me, I can sense it).
Open the zip file. U will see many files in different folders. Place them in the right areas and set proper perms. It might be hard for newbies but u only learn from your mistakes. Besides,I got it on my first try. If u dunno the proper perms, put the files in the proper areas and then reboot to recover, hope. Advanced and fix permissions.
Sent from my GT-I9003 using xda app-developers app
No
Sent from my GT-I9003 using xda app-developers app

[TWEAK][WOLFSCRIPT] (Smoothness Refined)

Hey xda users,
I had made a package of tweaks found at many places on xda and repacked in one zip.
It also Includes Adrenaline boost.
This tweak is tested on CM7 ROM(Having kernel with init.d support)
This tweak optimizes Ram and manages efficiently.
Heavy apps loads easily like chrome,HD game,etc
GAMERS now enjoy lagfree gaming.
TESTED THIS TWEAK ON G2X FOR 9 HOURS, AND GOT AMAZING RESULTS.
Stable battery life, smoothness increased. Responsiveness of g2x got a new level:good:
The Extreme version is most efficient script ever made.
Almost added all the tweaks available on xda.
This Tweak Package Includes
-Built.prop tweaks
-Adrenaline Boost
-Adrenaline TaskManager
-Sqlite Optimizing/Vacuum
-Increase touch Sensitivity
-Zipalign on every reboot
-Battery Saving Tweaks
-Lazerdroid
-Some My tweaks
-MUCH better Ram usage
-Cache Cleared at every boot
-SD speed tweak
-Logger removed
-Better browser performance
-Sysctl tweaks
-Better battery life
-Faster GUI
-xbin Tweaks
-Loopy smoothness tweak
-CPU GPU rendering
-Faster Networking
-Smoother LWP animation
-Kernel Tweaks
-Better gaming performance
-Seeder Entropy Generator added
Installation
1)Reboot into recovery
2)Mount /system & /Data<--WARNING: Don't skip this step.
3)Wipe Cache & dalvik Cache
4)Install Zip
5)Fix premissions
6)Reboot
NOTE:
HAVE A NANDROID BACKUP.
1st Boot Takes some time.
How to Use It Adrenaline Boost Script?
1) Open terminal emulator
2) Type :
Code:
su
boost
How to Use It Adrenaline Task Manager?
1) Open terminal emulator
2) Type :
Code:
su
tm
How to Use Seeder?
1) Open terminal emulator
2) Type :
Code:
su
seeder
To Uninstall script,
1.Download Uninstaller
2.Reboot to recovery
3.Mount system
4.Flash Uninstaller.zip
DOWNLOAD LINK-->HERE-Old version (Tested on G2x)
You can also download from OP: LINK-New Version (Not tested on G2x)
Credits;-
-alireza7991 for hisTweaks
-Imbawind for Adrenaline boost and Taskmanager
-LENAROX for lazerdroid
-emwno(for his tweaks)
-lpy (loopy smoothness tweak)
-pikachu01 (internet tweak)
-slaid480 (parameters / min free values from script)
-foreversupra (scripts from his fugutweak)
-lambgx02 for rngd binary
-TheBlackWolf (ME for my tweaks)
-Ryuinferno for Guiding me.
Hit Thanks If you feel the Change...:highfive:
RESERVED
NOTE
1. Have an nandroid backup.
2.Delete all other init.d scripts before installing wolfscript.
3.Max 5-6 MB free space in system is needed for proper installation and working.
If any dev wants to include this package in his/her rom, please give proper credits!!
Need some users to test on ICS/JB.
I'm sorry, but how do I erase init.d.scripts??
Well I just flashed this and I think that apps are opening faster not sure do.....
Sent from my LG-P999 using Tapatalk 2
jnhsd0319 said:
I'm sorry, but how do I erase init.d.scripts??
Click to expand...
Click to collapse
Use root explorer, go to system/etc/init.d and remove tweaks scrip..
mk2rimar said:
Well I just flashed this and I think that apps are opening faster not sure do.....
Sent from my LG-P999 using Tapatalk 2
Click to expand...
Click to collapse
Didn't get you??
Wath I mean is that apps load faster...looks like it
Sent from my LG-P999 using Tapatalk 2
Do I delete everything in the Unit.d folder?
Sent from my LG-P999 using xda app-developers app
---------- Post added at 12:27 AM ---------- Previous post was at 12:27 AM ----------
Init.d *
Sent from my LG-P999 using xda app-developers app
Phone is alredy fast with hp2.4.2 and overclocked to 1.5...so realy hard to say but it dosent hurt thats for sure
Sent from my LG-P999 using Tapatalk 2
GD3tyrone said:
Do I delete everything in the Unit.d folder?
Sent from my LG-P999 using xda app-developers app
---------- Post added at 12:27 AM ---------- Previous post was at 12:27 AM ----------
Init.d *
Sent from my LG-P999 using xda app-developers app
Click to expand...
Click to collapse
Not everything, delete just tweaks(if you have)
If no, just flash wolfscript.
Okay so I just flashed it. Is it suppose to take a while for it to boot?
Sent from my Nexus 7 using xda app-developers app
Yup it took a while for me to I even pulled my battery out twice lol
Sent from my LG-P999 using Tapatalk 2
Yes... Boot will take time.
Don't afraid... Lol
It's written on OP as a note.
Could be mental, but this is indeed making my phone run a little faster, pretty impressive!
Sent from my LG-P999 using xda app-developers app
Nice
Sent From mIphone
i dont know what im doing wrong but after the installation in the terminal i type su then boost i said not found, said the same to all three letters.
any help??
installation method
mount /system & data
wipe both cache
flash.zip
fix permission
reboot
open terminal emulator
type su then boost,tm or seeder and not found
sorry for my bad English
this is all
Flashed it, so far so good. Boot time wasnt really that long guys....... Im going to reserve judgment for a couple days. Was using pimp my rom but will give this a try. Im to the point where my init.d and build.prop are all custom with very little 'stock' left to them. Love My G2X. Thanks for your work.
Sent from my LG-P999 using xda app-developers app
keclaw said:
i dont know what im doing wrong but after the installation in the terminal i type su then boost i said not found, said the same to all three letters.
any help??
installation method
mount /system & data
wipe both cache
flash.zip
fix permission
reboot
open terminal emulator
type su then boost,tm or seeder and not found
sorry for my bad English
this is all
Click to expand...
Click to collapse
Download file again and do the same.
Because there is nothing wrong in this zip.
Everything works.
Worked for me one shot no prob at all
Sent from my LG-P999 using Tapatalk 2
mk2rimar said:
Worked for me one shot no prob at all
Sent from my LG-P999 using Tapatalk 2
Click to expand...
Click to collapse
Yes... Me too and almost all users.
PS:Has anyone tested tweaks on ICS/JB???
Benchmark score before/after or personal view/response??

Categories

Resources