How to Root and install CWM on Walton Primo GH2 - General Topics

[size=18pt]Root Walton Primo GH2 Using Root Master 1.3.6_Cekas[/size]
I personally tested this process 100% working
If you root your Android then you'll lose your warranty. Though unrooting is possible. Still sometimes it might not be unrooted to get the warranty back. So be careful and don't blame me if anything goes wrong. Because that's your mistake not mine.
[size=14pt]#Process:[/size]
Download, Install and Open Root Master 1.3.6_Cekas (rm136.apk).[http://www.mediafire.com/download/57503rgoxo89539/rm136.apk[/color]]http://www.mediafire.com/download/57503rgoxo89539/rm136.apk]
Tap Mulai Root (The loading might take some time). Then tap Root.
At last tap Batal to root your Primo GH2.
Reboot your Primo GH2. After the reboot you'll see Android is upgrading.
That's all. Now you can enjoy your rooted Walton Primo GH2.
Root Master - Mulai Root Master - Tap Root Root Walton Primo GH2 using Root Master - batai
** "Perizinan Rumah" is alternative App for Superuser.But you can use SuperSU app to get root access in your many apps like me.
For this you have to follow these steps:
First download and install SuperSU app. Then open it. It will ask you to install binary files. So tap normal. After that force stop SuperSU from setting>Apps>SuperSU>force stop. Then Use Link2SD to uninstall Perizinan Rumah.
After the restart you'll be able to use SuperSU app.
[size=18pt]#Flash ClockWorkMOD Recovery on Walton Primo GH2:[/size]
Download Walton Primo GH2's ClockWorkMOD recovery.img.[http://www.mediafire.com/download/1z0nf7ufo58jz0r/recovery.img]
Put that recovery.img on the root of the SD card.
Download, Install and Open Mobileuncle-Tools.apk.[Play Store]
Now it will ask you for Superuser Access. Tap The button from the right to allow root permission.
Now tap Recovery Update. Mobileuncle Tools will automatically find the recovery.img from root of the SD card.
Tap recovery.img like screenshot given below.
Mobileuncle Tools will ask Are sure flash recovery !. So tap OK to start the flashing process.
That's All. Your Android device will automatically reboot to recovery mod.
As this is a new phone of Walton. So it's very hard to find correct tutorials for this phone. But you don't need to be worried about because I am the developer here. Just leave a comment and I will try by best to help you out.

custom rom
Sajib6t9 said:
[size=18pt]Root Walton Primo GH2 Using Root Master 1.3.6_Cekas[/size]
I personally tested this process 100% working
If you root your Android then you'll lose your warranty. Though unrooting is possible. Still sometimes it might not be unrooted to get the warranty back. So be careful and don't blame me if anything goes wrong. Because that's your mistake not mine.
[size=14pt]#Process:[/size]
Download, Install and Open Root Master 1.3.6_Cekas (rm136.apk).[http://www.mediafire.com/download/57503rgoxo89539/rm136.apk[/color]]http://www.mediafire.com/download/57503rgoxo89539/rm136.apk]
Tap Mulai Root (The loading might take some time). Then tap Root.
At last tap Batal to root your Primo GH2.
Reboot your Primo GH2. After the reboot you'll see Android is upgrading.
That's all. Now you can enjoy your rooted Walton Primo GH2.
Root Master - Mulai Root Master - Tap Root Root Walton Primo GH2 using Root Master - batai
** "Perizinan Rumah" is alternative App for Superuser.But you can use SuperSU app to get root access in your many apps like me.
For this you have to follow these steps:
First download and install SuperSU app. Then open it. It will ask you to install binary files. So tap normal. After that force stop SuperSU from setting>Apps>SuperSU>force stop. Then Use Link2SD to uninstall Perizinan Rumah.
After the restart you'll be able to use SuperSU app.
[size=18pt]#Flash ClockWorkMOD Recovery on Walton Primo GH2:[/size]
Download Walton Primo GH2's ClockWorkMOD recovery.img.[http://www.mediafire.com/download/1z0nf7ufo58jz0r/recovery.img]
Put that recovery.img on the root of the SD card.
Download, Install and Open Mobileuncle-Tools.apk.[Play Store]
Now it will ask you for Superuser Access. Tap The button from the right to allow root permission.
Now tap Recovery Update. Mobileuncle Tools will automatically find the recovery.img from root of the SD card.
Tap recovery.img like screenshot given below.
Mobileuncle Tools will ask Are sure flash recovery !. So tap OK to start the flashing process.
That's All. Your Android device will automatically reboot to recovery mod.
As this is a new phone of Walton. So it's very hard to find correct tutorials for this phone. But you don't need to be worried about because I am the developer here. Just leave a comment and I will try by best to help you out.
Click to expand...
Click to collapse
I have already rooted my gh2. at this time we need custom rom like miui, glaxy, xperia, cm, etc. please help.

sajib4s said:
I have already rooted my gh2. at this time we need custom rom like miui, glaxy, xperia, cm, etc. please help.
Click to expand...
Click to collapse
Gonna get a GH2 within a few days.Hope I can provide a custom rom Till then,have fun with stock rom.

Help me to root Walton Primo GH.
Hello,
I'm a bit new in rooting. Never done this before. I've not found any specific tutorial to root my Walton Primo GH. It is MT6582 Chipset.
I'm in Motijheel,Dhaka, Bangladesh. My Phone no. is 01671077824. Would u please help me to root my phone?

rootmaster not root android 4.4.2
please reply
Sent from my Primo GH2 using XDA Premium 4 mobile app

Related

Easiet Way - ROOTING LENOVO A766

Hi all,I know some of us here have their own way to root the Lenovo A766 phone by using a Flash Tool.
I have a way which is the most simpliest and easiest way to root the phone.
1. Download Framaroot.
2. Install the downloaded APK file.
3. Choose to install Super User
4. Choose Broomir
5. DONE!
6. Your phone ROOTED!
Download root checker and check it!
• Super SU may asked you to update the app, just update it.
••I DO NOT RESPONSIBLE IF YOUR DEVICE BRICK!
CLICK THANKS BUTTON IF THIS HELP YOU :good::good:
I successfully root my a766.

[Q&A] Micromax Unite 2 Root and Custom Recovery

Q&A for Micromax Unite 2 Root and Custom Recovery
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Micromax Unite 2 lock screen app misbehaving after root
Sudeep Duhoon said:
Don't mix this guide with some other as i will not help in that case.
First of all, use read back to get rom dump (backup) as there is no stock rom available on net.
Go here and follow the guide.
Procedure:
1. Download and install drivers Driver_Auto_Installer_v1.1236.00.7z.
If not working try these too PDAnet_4150.rar.
Problem in installation?? Go here
2. Download and copy/move KingUser to your memory card. (Fix provided by sagarwep:op)
3. Download any kitkat recovery from here and place it in pc.
4. Open SP Flash tools and load this MT6582_Android_scatter.txt in it. (alternative download link of sp flash tools)
5. Click on 'recovery' in sp flash tools and select the downloaded Recovery .
6. Click Download in sp flash tools, remove the battery from phone and connect it to pc.
A green circle/download ok will confirm flashing.
7. Insert battery and press volume up+down+power on, then press volume up to select recovery.
Note: in ctr recovery you can swipe right to go forward and swipe back to go backward, use it to navigate, save volume buttons.
8. Tap on install from sd card and swipe right on screen to go forward, select Unite_2_4.4.2_Proper root......zip and say yes to flash.
9. Reboot, Done.
In case any one wants working MTK droid tools, here or here
Please subscribe, rate and like this thread.
Any problem, ask in fb group or pm me on facebook.
Click to expand...
Click to collapse
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
I've rooted my Micromax Unite 2 as per your root guide line, just after finishing root my lock screen app started misbehaving. after I restart my phone it first shows me the launcher and then after approx 20-30 seconds it shows lock screen. also I see an error message every time it boots which says that the process "system" is not responding -> kill or wait, choosing kill restores the normal phone function until next restart. restoring my backup of stock rom fixes the problem. could you please guide me how to solve this problem?
Not working
I did every single step correctly but idk why its showing no root access on my unite2 ...
then i tried rooting through mtk droid tools n im getting this error
ERROR:file abdb not install
the file isn't chosen
PLEASEEE HELP ... what to do
recovery mode problem
hey,
i have downgraded my micromax a106 to jeallybean of myphone aqua rio lite. now my recovery mode option is not working. on choosing recovery mode phone doesn't entering to recovery mode and it is booting to desktop. my phone is rooted. please help how to fix this
mmx unite 2 sd card mount/detect issue
Have recently bought micromax unite A106 june 2014 through flipkart. unable to detect/ mount external sd card .
tried with different sd cards which are working well in other phones.
Kindly help !!
Rooting Micromax unite 2- Problems
Hi Sudeep Duhoon,
I tried to root the Micromax Unite 2 using the software you have listed and followed the process to the T using the CTR 2..2 as recovery of choice.
1 When i try to activate the Root Explorer option on it gives me message"Sorry Test Failed, This feature can not run on your device"
2 When I connectbot i still get the $ sign in root
Please help.
Sadanand
Micromax Unite 2 Root and Custom Recover
Hi Sudeep ,
I had use the Tools and Rom given you to Root my Micromax Unite 2 . I had followed all the processes as shown.
Later on today When I tried to install Titanium It asked for SU Permission and It failed to get access and further message is its not rooted.
please help......
Use King Root ... 100 % success
Sent from my Micromax A106 using xda app-developers app
micromax unite 2 root
sir im unable to root my micromax unite 2. sp flash tools shows nothing n phone shows nothing but pc recognizes my device. developer is on plz help me
I want to upgrade to kit kat from jelly bean (mmx a106), but want to have flip to mute functionality of jelly bean
Can anyone guide me step by step for above 2 questions please
Sent from my Micromax Unite 2 using XDA Free mobile app
No command screen
I am using micromax unite 2
when i go to recovery mode i can see a no command screen... whenever i do something. any solution?
Recover Not Working Micromax Unite 2 After Flashing Stock Rom Of Android One?????
I have flashed rom of Micromax Canvas A1 on my Micromax Unite 2 By useing SP Flash tools. I thought it will work since both has almosh same specification (MTK 6582). And I will get new version of android on my Micromax Unite 2. Now my phone is not working. It is not even detected by SP flash tools. Otherwise i would have flashed the stock rom of my phone on it to make it work. Please help me with some guite by which i can recover my device.
Rooting Issue
Steps that i followed to Root my device:
1. Successfully created a Readback of my Custom Rom.
2. Flashed Carliv Touch Recovery(CTR) 2.2 for Kitkat.
3. Got into Recovery mode.. Installed zip from SD, and Rebooted.
4. Booted without any error.
5. Superuser application displayed in the launcher.
6. Opened Superuser to check settings(like unroot, permissions), and got worried it does not have any option to unroot.
7. Installed "Root Checker basic" to Check for root. When Tested it said " The device is not Rooted."(That's unexpected.) Tried other apps that require Root Access. Same message, Device not Rooted.
8. Then Download SuperSu.zip from searching from Google and placed it inside SD.
9. Booted to recovery, flashed SuperSu zip. then rebooted.
10. Finally my device got Rooted but was not able to remove the bloatware from the Phone. So Without wasting any time did the full unroot and posting these Steps.
My Question to anyone reading this post and who can answer these.
1. The "SuperUser" is not working due to CTR or the "Superuser" app is not able to root my device.
2. Has anyone rooted his/her Micromax Unite 2 recently?
3. If yes by which recovery, superuser app, xda post, or outside xda,google, youtube?
HELP PLZ
pmt changed for the rom it must be downloaded
what to do now plz help me guys
tjjain said:
pmt changed for the rom it must be downloaded
what to do now plz help me guys
Click to expand...
Click to collapse
Presuming you are referring to error in sp flash tool while flashing :
1)If you are flashing same Rom (jb to jb or kk to kk) then that means the partitions are changed, if you have changed ebrs then restore them first, then the error will go
2)if you are flashing jb to kk or kk to jb then use format all & download option.
---------- Post added at 12:12 PM ---------- Previous post was at 11:42 AM ----------
Sumit Mandal said:
Steps that i followed to Root my device:
1. Successfully created a Readback of my Custom Rom.
2. Flashed Carliv Touch Recovery(CTR) 2.2 for Kitkat.
3. Got into Recovery mode.. Installed zip from SD, and Rebooted.
4. Booted without any error.
5. Superuser application displayed in the launcher.
6. Opened Superuser to check settings(like unroot, permissions), and got worried it does not have any option to unroot.
7. Installed "Root Checker basic" to Check for root. When Tested it said " The device is not Rooted."(That's unexpected.) Tried other apps that require Root Access. Same message, Device not Rooted.
8. Then Download SuperSu.zip from searching from Google and placed it inside SD.
9. Booted to recovery, flashed SuperSu zip. then rebooted.
10. Finally my device got Rooted but was not able to remove the bloatware from the Phone. So Without wasting any time did the full unroot and posting these Steps.
My Question to anyone reading this post and who can answer these.
1. The "SuperUser" is not working due to CTR or the "Superuser" app is not able to root my device.
2. Has anyone rooted his/her Micromax Unite 2 recently?
3. If yes by which recovery, superuser app, xda post, or outside xda,google, youtube?
Click to expand...
Click to collapse
Use any custom recovery and flash koushik datta's superuser zip for rooting (he is the founder of cwm) to root your a106
tjjain said:
pmt changed for the rom it must be downloaded
what to do now plz help me guys
Click to expand...
Click to collapse
Thnks sir now my device is successfully rooted
Root Micromax Canvas 4
In the 5th step you said :
5. Select any path to save file and click ok, write 0x3E180000 in length and click ok.
But I have to backup my Micromax Canvas 4 [ A210 ]. What numbers should I enter there ?
Please tell me asap. Or any other link or post about Canvas 4 [ A210 ]
Thanks in advance.
this error is coming bro
PMT changed for the ROM; it must be downloaded
Rooting Micromax Unite 2
Hello Guys I followed Sudeep Duhoon and was successfull in installing TWRP custom Recovery and flashing superuser [it installed as system app and I wonder how to remove it now!!!], but still my phone doesn't seem rooted as Root Checker app says "This device doesnt have proper root access". I want to root this anyway please help.
No emmc backup
Hello. I have a wiko bloom (same phone as micromax unite 2 and myphonerio lite), I have flashed TWRP on kitkat, I couldn´t use the scatter file provided in the post so I used the one that I had from my phone. Once I flashed the recovery, I tried to backup my phone, but I have an error saying Error: couldn´t mount /emmc
I have looked for that folder with root explorer but there is no /eemc folder but some files intead (like [email protected], [email protected])
Before trying anything by myself I would like to know it there is any way to fix that. I would like to install roms and that things but I´m not sure they would work if the architecture of the software is not the same :/
TThank you in advance

[Tutorial] [ROOT] Root Panasonic P31

This tutorial is for how you can easily Root you Panasonic P31
Requirements::
*Panasonic P31 (of course)
*Root app (download in attachment)
*SuperSU apk (you can download it from Playstore)
Instructions::
*Download and install apk from attachments
*let it detect your phone
*Tap on Mulai Root
*Let it do it's work , then a popup window will open.
*Again tap on Root on popup window.
*Then tap on a red button.
*Now just install SuperSU apk.
*Hell Yeah your Panasonic P31 is rooted.
Note::
If SuperSU app says to install binaries just click on normal (in popup window) instead of cwm
Credits::
To Me @Swapnil Solanki and to the dev of the Root App
Please Do support by clicking on thanks button So that I can Start My development For this device
Enjoy Root apps on your phone I'll be porting some RoMs For it Soon
Screenshots in attachments.
cwm
Can you find cwm for this device ...?
I tried to make it but when I flashed it nothing happens... Help?
bro unfortunately i bricked my panasonic p31
can u pls send me a backup of ur rom plsssssssss
Panasonic eluga note
Unfortunately I couldn't root panasonic eluga note 32gb rom 3gb
I have already many methods to root
Please help
Thank you

[PROCEDURE] Rooting Coolpad Note 3 Lite [100% SAFE]

ROOT COOLPAD NOW!!​
Hey Guys I am back with the latest and the best Root procedure that wld root your device easily.
All of us knows that the One Click Root Tool KingoRoot has become a massive tool to root almost any phone with Android 2.3.6 to 5.1.1 . It is a big rooter but it is not safe to keep it for long the KingoUser app steals information from your device send it to unknown servers it can be dangerous.
So lets get this out
Firstly we have to use KingoRoot to get Temporary root from its SuperUser
1. Download and Install KingoRoot
2. Root Your Coolpad by clicking on One Click Root
3. Check whether Root access is obtained by Root Checker
4. Get Ready For SuperSU
Now Get SuperSu the Famous Root Permit App
1. Download and install Flashify from PlayStore
2. Download SuperSU.zip and copy paste to Internal SD
2.Download TWRP.IMG and Copy Paste it to the root of your Internal SD
3.Open Flashify Choose Flash Recovery image then Choose A File and choose that TWRP.IMG and go through the process agree to everything it says and flash recovery at last click yes on reboot to recovery now
4. After booting to recovery just go to Reboot and System
5. After booting to System head towards the KingoUser and Remove Root Option uder the menu the three dots on thr Top Right corner
6. It Would Restart your device
7. Power Off your Phone wait 10-secs
8. Hold Power and Vol + buttons Together Simultaneously
9. Let Phone boot in Recovery Mode
10. Click On Install and browse through the file SuperSu.zip u pasted
11. Choose the file and slide to start rooting
12. After its all done just reboot
And Its all Done You are on a Stable Root Permit App Safer Too:fingers-crossed:
Hit thanks if Helped :good:
Has any one tried? Worked?

[MT6580] [Kernel 3.18.19] Leagoo OS - Symphony i10

Disclaimer:
By flashing a custom rom, your warranty is void.
I am not responsible for bricked devices. You are choosing to make these modifications.
I will not give support for any modifications, frameworks and apps you install.
I will not give support, if you did not follow flash instructions 'word by word'.
Click to expand...
Click to collapse
Notable Feature :
Xpossed Firmware Support
Background Apps Working
Themed SystemUI
Known Bug:
*Front Camera Flash Not Supporting*
*Blur Not Support During Camera Focus*
*Not Working Smart Awake*
*Problem in Downloading From Playstore*
Requirements:
1. Symphony i10 Device
2. TWRP Recovery
3. Leagoo OS For Symphony i10
4. Little Brain.
How to Install:
Step 1. To get started you need a TWRP recovery. Here is the guide to root Symphony i10 and Install TWRP. If you already done that, then leave this step and follow the step 2.
Step 2. Download Leagoo OS For i10 zip file here and save the file on your phone’s internal memory
Step 3 : Download SuperSU V2.76 and keep in internal memory.
Step 4. Once all Zip files are saved on your phone. Boot your i10 into TWRP Recovery Mode. To do this Turn off your phone and Turn on the phone while holding Power and Volume UP buttons.
Step 5. From the TWRP recovery main menu, Go to Wipe and select "Data", "System", "dalvik" and "Cache". Now Swipe to Wipe, This will wipe your ROM System.
Step 6. Now go back to main menu of recovery and go to Install and find the zip files you saved on your Symphony i10 Internal memory.
Step 7. From here, Select the Leagoo OS For i10 zip file that you downloaded on step 2, after that select Add more zips option and select SuperSU > Swipe to flash.
Step 8. Wait for the flash to finish and press Wipe Cache & Dalvik.
Step 9. Press Back and press Reboot System. First boot will take some time, wait for 10-15 minutes to apply the CM 13 update on your phone.
Credits:
*Hasin Rayan ZIdni (For i10)*
*Kbd Md Rasel (For GH6)*
buddy could u please port a recovery to my device "intex cloud q11"
device specs
KERNEL 3.18.19+
mediatek mt6580
android 6.0
display 5.5 inch hd
resolution 720x1280
.
i can't port it via easy magic twrp maker coz it asks root permissions and i cant root my device [intex cloud q11].
i ve been trying to root my device, but i cant root it.
i ve tried almost every rooting tools both pc and droid and even mtkdroidtools.
but neither of them worked.
can u just port this recovery to my device.
i'll send u the stock boot.img and recovery.img of my device.
please.
i'd do anything in return for u. please.
please please please please.
dj4v1n45h said:
buddy could u please port a recovery to my device "intex cloud q11"
device specs
KERNEL 3.18.19+
mediatek mt6580
android 6.0
display 5.5 inch hd
resolution 720x1280
.
i can't port it via easy magic twrp maker coz it asks root permissions and i cant root my device [intex cloud q11].
i ve been trying to root my device, but i cant root it.
i ve tried almost every rooting tools both pc and droid and even mtkdroidtools.
but neither of them worked.
can u just port this recovery to my device.
i'll send u the stock boot.img and recovery.img of my device.
please.
i'd do anything in return for u. please.
please please please please.
Click to expand...
Click to collapse
inbox me ur boot.img or recovery
Zidni said:
inbox me ur boot.img or recovery
Click to expand...
Click to collapse
hey buddy. no thanks.
i ve made it. ported twrp without a bug.
thanks btw.
Touch not worked in Twrp
How to fixed touch not working in symphony v75??

Categories

Resources