I accidently flashed a MetrocPCS LG Optimus F6 (LG MS500) with F3 firmware.
Now when i try to turned on the phone the backlight blinks twice and the colours around the home button blinks different colours.
When I try to connect in download mode it does the same thing and then the home button blinks red- it is not recognized by KDZ_FW_UPD.
Master Reset does not work either
PLEASE HELP
I have working phone
profzk said:
I accidently flashed a MetrocPCS LG Optimus F6 (LG MS500) with F3 firmware.
Now when i try to turned on the phone the backlight blinks twice and the colours around the home button blinks different colours.
When I try to connect in download mode it does the same thing and then the home button blinks red- it is not recognized by KDZ_FW_UPD.
Master Reset does not work either
PLEASE HELP
Click to expand...
Click to collapse
I have working phone, but I don't know how to send to send you, I can send file by file if you want
kdm6389 said:
I have working phone, but I don't know how to send to send you, I can send file by file if you want
Click to expand...
Click to collapse
Could you please tell me how to flash it again? All flashtools I've used, got me an error WPARAM 100 LPARAM 64
Sorry
osotoon said:
Could you please tell me how to flash it again? All flashtools I've used, got me an error WPARAM 100 LPARAM 64
Click to expand...
Click to collapse
Sorry I don't know that yet.
Can you boot into recovery?? If yes then flash a stock or custom rom.
It's possible ...,
What you need is lot of free time,
Read
https://forum.xda-developers.com/showthread.php?t=2797190
https://www.mylgphones.com/metrocpcs-lg-optimus-f6-lg-ms500-stock-rom-firmware-ms50010e.html
http://androidforums.com/threads/metropcs-unbrick-kdz-for-metropcs-updated-11-13-2013.788365/
Flasher is good UI but work, it take about 30min to flash, the progress bar don't work
You need to boot phone in download mode.
Root using king root after this.
I did all these. Now my phone working, but now Moto E is dead.
kdm6389 said:
It's possible ...,
What you need is lot of free time,
Read
https://forum.xda-developers.com/showthread.php?t=2797190
https://www.mylgphones.com/metrocpcs-lg-optimus-f6-lg-ms500-stock-rom-firmware-ms50010e.html
http://androidforums.com/threads/metropcs-unbrick-kdz-for-metropcs-updated-11-13-2013.788365/
Flasher is good UI but work, it take about 30min to flash, the progress bar don't work
You need to boot phone in download mode.
Root using king root after this.
I did all these. Now my phone working, but now Moto E is dead.
Click to expand...
Click to collapse
What does Moto E have to do with LG F6?
Sent from my SM-S903VL using Tapatalk
Droidriven said:
What does Moto E have to do with LG F6?
Sent from my SM-S903VL using Tapatalk
Click to expand...
Click to collapse
Moto E is my 2nd phone, which dead, because I haven't used it for 20days, now it's saying "hab check failed, boot error"
Btw it has nothing to do with lg phone
I am unable to restore stock, stuck at 4 % with retry, anyone can help
Network not detected
start in 1 hour
internal sdcard card size shows 128mb
picture where stuck
Now bricked
download request
hey guys. sorry i know this is an old post. I have a LG MS500 from Metro PCS and it has faulty software. I need to reflash it. I have the firmware already. I just need the R&D tool. Every link for the R&D Tool is dead. Can someone please send it to me? Thank you. You might be thinking that it is an old phone, but i only want to revive it for old times sake
Related
good day to all
my phone lg p920 is not responding
even charging no lights or vibrate even the on/off key
even i press vol up and connect to pc
even i press vol down + end key + power on at the same time
my phone is new and i buy it new
this problema begins when i tried to upgrade it and try to restore my imei back
upgrade is ok and it work
but on the process of restoring back my imei my phone does not respond anymore after removing the battery and return it back
i brought it from holland and now in algeria
what shall i do???
please help me
Same Problem here... wanted to flash back to stock rom after flash-process was 100% my phone dont came back up stays off and dont get recognized by PC. I will try to send it to LG
Before you send it to LG tell me what you do to restore
xbsall said:
Before you send it to LG tell me what you do to restore
Click to expand...
Click to collapse
my phone is breaked too when i connect to pc no hardwares found,only omap 4430 for 3 seconds and nothing else...
ssacemilan said:
my phone is breaked too when i connect to pc no hardwares found,only omap 4430 for 3 seconds and nothing else...
Click to expand...
Click to collapse
Use the resurrection guide
4.0.4 SuperG with ACiD Audio LG-P920
For me not even OMAP device is found (
Derkaefer said:
For me not even OMAP device is found (
Click to expand...
Click to collapse
change usb cable and pc and take off the battery
xbsall said:
Before you send it to LG tell me what you do to restore
Click to expand...
Click to collapse
i try this one http://forum.xda-developers.com/showthread.php?t=1734330
at the step number 10 after putting back my battery my phone does not anymore
Use the resurrection method.
If you cant understand it ask a user who has already done it to help you.
mj_malabed said:
i try this one http://forum.xda-developers.com/showthread.php?t=1734330
at the step number 10 after putting back my battery my phone does not anymore
Click to expand...
Click to collapse
thank you to all...this time it work with http://forum.xda-developers.com/showthread.php?t=1629307
my pone already opened..but i got another problema again...
no network and no imei...
xbsall said:
use the resurrection method.
If you cant understand it ask a user who has already done it to help you.
Click to expand...
Click to collapse
plz give me link of it.thank you
Hello XDA-Developers
Before I am writing this, I want to say that I am relative jung and my English is not the best.
1 Year ago I rooted my phone, it worked great and so on.
After a half yeah I updatet the firmware on 2.3.3, but the root was still there.
No Problem, yesterday I wanted to install the cyagon-mod and I wanted first to flashback to the old Baseband @ 2.2.2.
I use the KDZ Updater and try to flashback to 2.2.2, but I followed the tutorials here, but at the time of flashing I
got a problem! The KDZ Updater sayed there was a fail. I attached the log. (Maybe the kdz file was damaged?)
I pulled it out and I took out the battery.
......
Now I think my LG Optimus one is bricked.
I if I try to start the phone nothing happend, if I try to get to the recovery mode it won´t give me a signal.
If I plug it into my PC with LG united Mobile Drivers installed it won´t get to the recovery mode.
I saw that I have a C++ runtime enviroment is that a Problem?
Is there probaly a method to repair the phone? Or can someone at my local mobilephone shop repair my mobile
Greetz
Bladgen said:
Hello XDA-Developers
Before I am writing this, I want to say that I am relative jung and my English is not the best.
1 Year ago I rooted my phone, it worked great and so on.
After a half yeah I updatet the firmware on 2.3.3, but the root was still there.
No Problem, yesterday I wanted to install the cyagon-mod and I wanted first to flashback to the old Baseband @ 2.2.2.
I use the KDZ Updater and try to flashback to 2.2.2, but I followed the tutorials here, but at the time of flashing I
got a problem! The KDZ Updater sayed there was a fail. I attached the log. (Maybe the kdz file was damaged?)
I pulled it out and I took out the battery.
......
Now I think my LG Optimus one is bricked.
I if I try to start the phone nothing happend, if I try to get to the recovery mode it won´t give me a signal.
If I plug it into my PC with LG united Mobile Drivers installed it won´t get to the recovery mode.
I saw that I have a C++ runtime enviroment is that a Problem?
Is there probaly a method to repair the phone? Or can someone at my local mobilephone shop repair my mobile
Greetz
Click to expand...
Click to collapse
if der is no light coming out than its hard bricked if you can go to emergency mode(google it) then u r lucky u can flash ur file again but this time use lgmdp method
or use kdz with precaution
androidisfuture said:
if der is no light coming out than its hard bricked if you can go to emergency mode(google it) then u r lucky u can flash ur file again but this time use lgmdp method
or use kdz with precaution
Click to expand...
Click to collapse
Thank you for your help, what do you mean with no light coming out I don´t understand you.
Do you think a member of a company which repair mobile phones can repair the phone?
Greetz
Bladgen said:
Thank you for your help, what do you mean with no light coming out I don´t understand you.
Do you think a member of a company which repair mobile phones can repair the phone?
Greetz
Click to expand...
Click to collapse
by power on is lg logo comes
if not something or the other happens like emergency mode download mode if not
then its hard bricked
and i think u have your warranty over so just buy a new phone the company will charge u too much if u are hard bricked
No.. phone repair stores cant help you.
You have to do it yourself or take it to LG service centre.
First press Back + Vol up + Power button.. see if you get yellow emergency mode.
If no your phone is hard bricked.. no way to repair.. but stil search the forum.. see if you can make it work.
See if this helps
If emergency mode is working.. then you can easily recover your phone.
Here
Flash the recovery and then flash any rom of your choice!!
rr0yy said:
No.. phone repair stores cant help you.
You have to do it yourself or take it to LG service centre.
First press Back + Vol up + Power button.. see if you get yellow emergency mode.
If no your phone is hard bricked.. no way to repair.. but stil search the forum.. see if you can make it work.
See if this helps
If emergency mode is working.. then you can easily recover your phone.
Here
Flash the recovery and then flash any rom of your choice!!
Click to expand...
Click to collapse
i have said the same thing man
I'm not a noob. I'm a Super noob :crying: I just bricked my LGP690 trying to flash it with Unofficial Cyanogen Mod 10 . I was using ClocworkMod Recovery as per the video. But I was never able to boot the phone again. It just shows the lg logo. I tried to get into emergency mode and flash official LG firmware into it using this, but the flasing didn't succeed. Now I can't even get to emergency mode. The phone just shows the LG logo. PLEASE PLEASE PLEASE help me . I just dont want my phone to get bricked. I just want my phone back please help :crying:
:crying::crying::crying::crying::crying:
Check out this thread...i assume that u r able to enter fastboot mode...
forum.xda-developers.com/showthread.php?t=1827723
Sent from my Optimus One running PA 2.52 by ByteCode.
You could try asking herehttp://forum.xda-developers.com/showthread.php?t=1411500
We fixed it !!! unbricked LGP690
Thanks for your support guys It is fixed. Previously while using unbrick techniques from karandeedps post I was getting Error WParam : 100 LParam : 6 in KDZ . Actually while flashing the phone needs to be in emergency mode. In my case , I could connect the phone to the computer only in Emergency mode so when KDZ started it would restart the phone and it would not be able to get in Emergency mode. After about 36 hrs of tikering a simple idea struck me, well I was stupid not to use it initially .
I manually put the phone in Emergency mode as KDZ was unable to it by holding POWER + VOLUME DOWN + RETURN and voila there came the emergency mode and within a few minutes flashing was complete and the phone is alive again.....
This time I'll use the proper method as described in Unofficial LG Optimus Net Thread and see if it works .... If it doesn't ..... Well , I know I have a superb community to help me out ....
THANKS :laugh:
I Bricked My Phone It Won't Turn On No Lights No Recovery No LG Logo Nothing Computer Won't Recognize The Phone Please Help Me I Had CM9 Tried Flashing CM10 Failed Booting So I Used KDZ To Go Back To Stock And Failed So I Panicked And Removed The Battery It Won't Boot Up I Have A LG Optimus T
Samsung Has A Jig
Motorola Has A Factory Cable
LG Has? Anything Similar??
Sent from my SAMSUNG-SGH-T769 using xda premium
Jserrano56 said:
I Bricked My Phone It Won't Turn On No Lights No Recovery No LG Logo Nothing Computer Won't Recognize The Phone Please Help Me I Had CM9 Tried Flashing CM10 Failed Booting So I Used KDZ To Go Back To Stock And Failed So I Panicked And Removed The Battery It Won't Boot Up I Have A LG Optimus T
Samsung Has A Jig
Motorola Has A Factory Cable
LG Has? Anything Similar??
Sent from my SAMSUNG-SGH-T769 using xda premium
Click to expand...
Click to collapse
Are you able to get the phone to Emergency mode by holding power + volume up + back button. 3 days ago when I soft bricked it , I was able to see the LG logo (Mine is Optimus 690 , and I get your's is based on Optimus 500). If emergency is working then you may try this .
Do make sure to disable the LG modem in device manager after connecting it to PC.
No Emergency Mode No Lights No Recovery No LG Logo Nothing Computer Won't Recognize The Phone
Samsung Has A Jig
Motorola Has A Factory Cable
LG Has? Anything Similar?? Any Unbrick Tool/ Device By Or For LG Phones?
Sent from my SAMSUNG-SGH-T769 using xda premium
you need jtag, my friend. Contact connexion2005/mobiletechvideos.
Sent from my Nexus 7 using Tapatalk 2
Ok I Will Later Today I'm At School Now Had A Delayed Start Due To Snow I Will Contact Them At 5:30 Or 6 PM Central Time Zone USA Today
Sent from my SAMSUNG-SGH-T769 using xda premium
Jserrano56 said:
No Emergency Mode No Lights No Recovery No LG Logo Nothing Computer Won't Recognize The Phone
Samsung Has A Jig
Motorola Has A Factory Cable
LG Has? Anything Similar?? Any Unbrick Tool/ Device By Or For LG Phones?
Sent from my SAMSUNG-SGH-T769 using xda premium
Click to expand...
Click to collapse
try this , even if its not the same model, the software screen might come up. Nothing bad to try eh ! http://forum.xda-developers.com/showthread.php?t=1846750
Hope it works !
I'll Try As Soon As I Get Home
Sent from my SAMSUNG-SGH-T769 using xda premium
panchtatvam said:
try this , even if its not the same model, the software screen might come up. Nothing bad to try eh ! http://forum.xda-developers.com/showthread.php?t=1846750
Hope it works !
Click to expand...
Click to collapse
It Didn't But Thanks
Sent from my SAMSUNG-SGH-T769 using xda premium
panchtatvam said:
I'm not a noob. I'm a Super noob :crying: I just bricked my LGP690 trying to flash it with Unofficial Cyanogen Mod 10 . I was using ClocworkMod Recovery as per the video. But I was never able to boot the phone again. It just shows the lg logo. I tried to get into emergency mode and flash official LG firmware into it using this, but the flasing didn't succeed. Now I can't even get to emergency mode. The phone just shows the LG logo. PLEASE PLEASE PLEASE help me . I just dont want my phone to get bricked. I just want my phone back please help :crying:
:crying::crying::crying::crying::crying:
Click to expand...
Click to collapse
Can you post your method to install cwm
raiso said:
Can you post your method to install cwm
Click to expand...
Click to collapse
i'm confused ... you want to know to install cwm or wanna help me out ?
If the later then thanks , the issue is already fixed .
You have to us kdz to fixed your bricked phone
Sent from my LG-P690 using xda app-developers app
Hi guys,
I am a former lg g2 user and while playing with the mixer paths.xml file of my g pro 2 for increasing the sound of my speaker and everything it went into a bootloop. It wont start.
Now a followed a guide in this link
http://www.bloglovin.com/viewer?pos...me_type=a&blog=7461157&frame=1&click=0&user=0
I have download 1.5 gb kdz file and everything.
But now when i do everything lg mobile support tool says you already have the latest software available from lg mobile support tool.
Please is there anyway so that i dont have to download that 1.5 gb file again because on my internet connection it takes about 7 hours.
I am a relationship manager and i have a big client meeting tomorrow and all the things are on my phone.
Please help me out
visheshsahlot said:
Hi guys,
I am a former lg g2 user and while playing with the mixer paths.xml file of my g pro 2 for increasing the sound of my speaker and everything it went into a bootloop. It wont start.
Now a followed a guide in this link
http://www.bloglovin.com/viewer?pos...me_type=a&blog=7461157&frame=1&click=0&user=0
I have download 1.5 gb kdz file and everything.
But now when i do everything lg mobile support tool says you already have the latest software available from lg mobile support tool.
Please is there anyway so that i dont have to download that 1.5 gb file again because on my internet connection it takes about 7 hours.
I am a relationship manager and i have a big client meeting tomorrow and all the things are on my phone.
Please help me out
Click to expand...
Click to collapse
Have you tried the LG PC Suite? I found it very useful several times for getting out of a mess on my old G2.
Be careful! When I performed a factory reset on my G Pro 2 my external sd card got wiped.
Sent from my LG-D802 using XDA Premium 4 mobile app
help
Hi Vishesh,
Were you able to recover your phone?If yes then please help me getting out of a bootloop
visheshsahlot said:
Hi guys,
I am a former lg g2 user and while playing with the mixer paths.xml file of my g pro 2 for increasing the sound of my speaker and everything it went into a bootloop. It wont start.
Now a followed a guide in this link
http://www.bloglovin.com/viewer?pos...me_type=a&blog=7461157&frame=1&click=0&user=0
I have download 1.5 gb kdz file and everything.
But now when i do everything lg mobile support tool says you already have the latest software available from lg mobile support tool.
Please is there anyway so that i dont have to download that 1.5 gb file again because on my internet connection it takes about 7 hours.
I am a relationship manager and i have a big client meeting tomorrow and all the things are on my phone.
Please help me out
Click to expand...
Click to collapse
I flashed my phone yesterday (bootloop) with this tutorial http://www.lg-phones.org/how-to-flash-lg-g-pro-2-with-a-tot-firmware.html
visheshsahlot said:
Hi guys,
I am a former lg g2 user and while playing with the mixer paths.xml file of my g pro 2 for increasing the sound of my speaker and everything it went into a bootloop. It wont start.
Now a followed a guide in this link
http://www.bloglovin.com/viewer?pos...me_type=a&blog=7461157&frame=1&click=0&user=0
I have download 1.5 gb kdz file and everything.
But now when i do everything lg mobile support tool says you already have the latest software available from lg mobile support tool.
Please is there anyway so that i dont have to download that 1.5 gb file again because on my internet connection it takes about 7 hours.
I am a relationship manager and i have a big client meeting tomorrow and all the things are on my phone.
Please help me out
Click to expand...
Click to collapse
Use this modded tools to flash your KDZ file
choose 3GQCT for Type
CS_EMERGENCY for PhoneMode
select your KDZ
put your phone to DOWNLOAD MODE then press Normal Flash, it takes about 12 mimutes to finishs
A factory reset is recommended
Link : http:// w w w.mediafire.com/download/mc2wmpdjt38sdr8/LG+Flash+Tool+2014.rar
Credit go to oringinal author
LG G Pro2 D838 bootloop
My LG G Pro2 D838 model keep looping it isn't giving me enough time to hard reset or to change the ROM it just keep boot looping every 5 + seconds and when i plug it in to charge it just keeps looping over and over again without seeing the charging light appearing
Same problem here with my F350L !!!
My phone got stuck at 90% while flashing. Now it does not open anymore - only the LG logo shows off and on and can no longer be detected by my PC. I can not go to download mode, either. My phone now is on a 'bootloop" mode.
Any help from our Masters out there on how I can fix this bootloop issue?
TIA.
Note: On Lollipop F350v20f
---------- Post added at 11:06 AM ---------- Previous post was at 10:46 AM ----------
gunlock4real said:
Use this modded tools to flash your KDZ file
choose 3GQCT for Type
CS_EMERGENCY for PhoneMode
select your KDZ
put your phone to DOWNLOAD MODE then press Normal Flash, it takes about 12 mimutes to finishs
A factory reset is recommended
Link : http:// w w w.mediafire.com/download/mc2wmpdjt38sdr8/LG+Flash+Tool+2014.rar
Credit go to oringinal author
Click to expand...
Click to collapse
Can't go to download mode as my phone F350L is no longer detected by my PC after it went bootlooping non-stop.
Is there any other better way?
TIA.
I need help i keep looking and googling but nothing for me i tryed to flash t mobiles cloudy rom on my att lg g3 now its bricked good i tryed lg flash tools i get failed i have no recovery mode no nothing just a black screen every now and then when the battery dies and i plug it in it will show the charging for a sec the it makes nose when i plug it in the pc lets me change the port to 41 idk help
Dominic62808 said:
I need help i keep looking and googling but nothing for me i tryed to flash t mobiles cloudy rom on my att lg g3 now its bricked good i tryed lg flash tools i get failed i have no recovery mode no nothing just a black screen every now and then when the battery dies and i plug it in it will show the charging for a sec the it makes nose when i plug it in the pc lets me change the port to 41 idk help
Click to expand...
Click to collapse
Well you stated your own problem it won't work because you flashed D851 on a D850. You'll need to use a hex editor on the tot file to be able to get it to flash.
Sent from my iPhone using Tapatalk
I never messed with the hex before what do i do and how do i do it
Has any one done this before