Database Info

[Q] flashing ROM

Hi, i want to put this ROM in my phone :
http://forum.xda-developers.com/showthread.php?t=1096043
i unlocked the bootloader with HTC DEV and rooted
hboot - 2.00.0002
radio - 3822.10.08.04_M
can u tell me what i need to do to put this rom on my device
and tell me please what is use of RADIO and hboot ?
thanks !

IgorICS said:
Hi, i want to put this ROM in my phone :
http://forum.xda-developers.com/showthread.php?t=1096043
i unlocked the bootloader with HTC DEV and rooted
hboot - 2.00.0002
radio - 3822.10.08.04_M
can u tell me what i need to do to put this rom on my device
and tell me please what is use of RADIO and hboot ?
thanks !
Click to expand...
Click to collapse
1.First download Rom manager from market
2. Rom manager flashes ClockworkMod Recovery
3. Now download that rom and save to sd card
4. Now reboot into recovery from ROM manager
5. Inside recovery navigate to backup and restore. now make backup of your current ROM(Very important) or you can directly make backup from ROM manager
6) When you finish backing up,
7) format data/factory reset
8) From advanced, format data,system,cache
9) Also format cache partition
10) Finally, goto install from zip from SD card
11) Navigate your download rom and confirm by pressing YES
12) Wail till CWM flashes
13) Reboot and wait.........................done....
And never flash radio or hboot if it is not necessary.

i did all you said, and i was stuceked at htc logo for 20 mins...i pulled out battery
and tryed to go in recovery to restore backup, and now i'm sutcked at htc logo again
i have revoluntionary cwm...
what should I do ?

sagarda7 said:
1.First download Rom manager from market
2. Rom manager flashes ClockworkMod Recovery
3. Now download that rom and save to sd card
4. Now reboot into recovery from ROM manager
5. Inside recovery navigate to backup and restore. now make backup of your current ROM(Very important) or you can directly make backup from ROM manager
6) When you finish backing up,
7) format data/factory reset
8) From advanced, format data,system,cache
9) Also format cache partition
10) Finally, goto install from zip from SD card
11) Navigate your download rom and confirm by pressing YES
12) Wail till CWM flashes
13) Reboot and wait.........................done....
And never flash radio or hboot if it is not necessary.
Click to expand...
Click to collapse
@sagarda : You forgot a very important thing... He unlocked his phone using HTC dev site. That means the boot is still locked. So the kernel is still preserved from the old ROM, which is incompatible with the ROM he's flashed now, and this is never going to allow the phone to boot up with this new ROM.
So he has to flash boot.img separately from fastboot. I know you were only trying to help, but it's best to only give advice that you have actually tried yourself, otherwise you may end up bricking someone's phone trying to help him.
As for @igorICS, you need to extract boot.img from the ROM zip, and flash it separately using fastboot if you want to boot up this new ROM. And please learn to do some reading before taking the plunge, rather than later...

i pulled battery again and i enered recovery somehow, and recived message,
''can't mount ...''
and i just restored my backup
and i dont wanna **** around with this thing...

enigmaamit said:
@sagarda : You forgot a very important thing... He unlocked his phone using HTC dev site. That means the boot is still locked. So the kernel is still preserved from the old ROM, which is incompatible with the ROM he's flashed now, and this is never going to allow the phone to boot up with this new ROM.
So he has to flash boot.img separately from fastboot. I know you were only trying to help, but it's best to only give advice that you have actually tried yourself, otherwise you may end up bricking someone's phone trying to help him.
As for @igorICS, you need to extract boot.img from the ROM zip, and flash it separately using fastboot if you want to boot up this new ROM. And please learn to do some reading before taking the plunge, rather than later...
Click to expand...
Click to collapse
Thanks for your advice.why HTC dev released the method to unlock if that Does not let other to enjoy custom ROM?

sagarda7 said:
Thanks for your advice.why HTC dev released the method to unlock if that Does not let other to enjoy custom ROM?
Click to expand...
Click to collapse
Because they are a corporation. And corporations are known for this kind of stupidity.
Heard of Apple? They are the benchmark for all this nonsense!

I flashed CoreDroid room and after that i extracted boot.img from ROM.zip
and in fastboot entered this
C:\Android>fastboot flash C:\Desktop boot.img
sending 'C:\Users\Igor\Desktop' (2194 KB)... OKAY [ 0.374s]
writing 'C:\Users\Igor\Desktop'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.655s
i get FAILED result i dont know whats the problem but I wont try to boot my phone
im afraid getting stucked on htc logo again..
tell me whats wrong
im still S-on
2.00.0002 hboot
3822.10.08.04 radio
im waiting your reply . tnx

Tried to search the error here : http://forum.xda-developers.com/showthread.php?t=1357625
But, wait for other reply here. That may not be the solution to yours.

thats not a problem my bootloader is unlocked i wait other reply.

IgorICS said:
I flashed CoreDroid room and after that i extracted boot.img from ROM.zip
and in fastboot entered this
C:\Android>fastboot flash C:\Desktop boot.img
sending 'C:\Users\Igor\Desktop' (2194 KB)... OKAY [ 0.374s]
writing 'C:\Users\Igor\Desktop'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.655s
i get FAILED result i dont know whats the problem but I wont try to boot my phone
im afraid getting stucked on htc logo again..
tell me whats wrong
im still S-on
2.00.0002 hboot
3822.10.08.04 radio
im waiting your reply . tnx
Click to expand...
Click to collapse
MarlX said:
Tried to search the error here : http://forum.xda-developers.com/showthread.php?t=1357625
But, wait for other reply here. That may not be the solution to yours.
Click to expand...
Click to collapse
The command should be:
fastboot flash boot C:\Users\Igor\Desktop\boot.img

no way bro, maybe I'm retarded but this thing wont flash...i flashed sucsessfuly boot.img and im stucked on htc logo again...doesn't matter ill press thanks button cause you tried to help me.. this thing wont flash.. i dont know why..

IgorICS said:
I flashed CoreDroid room and after that i extracted boot.img from ROM.zip
and in fastboot entered this
C:\Android>fastboot flash C:\Desktop boot.img
sending 'C:\Users\Igor\Desktop' (2194 KB)... OKAY [ 0.374s]
writing 'C:\Users\Igor\Desktop'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 0.655s
i get FAILED result i dont know whats the problem but I wont try to boot my phone
im afraid getting stucked on htc logo again..
tell me whats wrong
im still S-on
2.00.0002 hboot
3822.10.08.04 radio
im waiting your reply . tnx
Click to expand...
Click to collapse
Just add a \ between Desktop and boot.img!
I try not to use desktop for cmd purposes...
Just to be 100% sure, follow the steps below:
1. Make a new folder in C:\ called boot
2. Now place the boot.img in the folder you created (C:\boot)
3. Now, using fastboot, type the following at the command prompt (for you, i see that it is C:\Android) ----- fastboot flash boot C:\boot\boot.img
4. Once you get a confirmation of a successful flash, type adb reboot
5. That's it. Enjoy your new ROM !

Root official ics for desire s

has anyone already tried to root there official ics Rom that was released yesterday? And how?
Sent from my HTC Desire S using xda premium

Once you've installed the RUU, use ADB to push 4ext recovery, then reboot into recovery and flash the Supervisor 3.1.3 file - once you then reboot into the full system again you will have root access and can install the 4ext updater from the Play Store and update recovery to the latest version.

SimonTS said:
Once you've installed the RUU, use ADB to push 4ext recovery, then reboot into recovery and flash the Supervisor 3.1.3 file - once you then reboot into the full system again you will have root access and can install the 4ext updater from the Play Store and update recovery to the latest version.
Click to expand...
Click to collapse
anyone can confirm this is working?

mayurh said:
anyone can confirm this is working?
Click to expand...
Click to collapse
Yes. I can - that's why I posted the solution.
Or you can just use the search button. :banghead:

SimonTS said:
Once you've installed the RUU, use ADB to push 4ext recovery, then reboot into recovery and flash the Supervisor 3.1.3 file - once you then reboot into the full system again you will have root access and can install the 4ext updater from the Play Store and update recovery to the latest version.
Click to expand...
Click to collapse
Simon your DS was S-ON and you got it S-OFF with this procedure.
You pushed the 4ext recovery on a S-ON bootloader, right?
thank you

linqdesires said:
Simon your DS was S-ON and you got it S-OFF with this procedure.
You pushed the 4ext recovery on a S-ON bootloader, right?
thank you
Click to expand...
Click to collapse
No, my DS was S-Off - done with XTC-Clip 18 months ago.

Go to recovery mode;
choose .zip from sd card
Flash this
100%

potencia said:
Go to recovery mode;
choose .zip from sd card
Flash this
100%
Click to expand...
Click to collapse
give thanks is for free

For the people, like me, who have only done the HTCdev unlock ( S-ON ), it's quite easy to update the software/ROM using the RUU.
After downloading the RUU from here : http://forum.xda-developers.com/showthread.php?t=1857478 I just immediately ran it, but it failed with an error along the lines of : RUU, security fail! update fail!
So after a bit of googling around I figured that the RUU might simply not be happy with the phone being in an unlocked state, so after doing the following the RUU ran successfully :
1. Re-lock the bootloader with the "fasboot oem lock" command. The output after running the command shows the lock process was successful but moaned about something else failing, still not sure what that was. So after doing this my phone was kinda stuck in the bootloader, where it says ***relocked*** at the top and ***security warning!*** right underneath it. Everytime I reboot or powercycle it would just boot straight back into the bootloader with the warnings, which worried me a little bit.
2. In the bootloader I selected fastboot and connected the USB cable, and then I ran the RUU again. This time it completed successfully after some time. My HTC sync was installed but not running, so seems like that isn't even needed ?
And that's actually it. This process obviously puts the phone in a relocked state, and an overall factory configuration, it also restores the recovery ROM to the factory image or whatever.

No success
Hi,
I try to root my S-off /XTC Clip/ device, BUT:
1. 4ext pushed with adb - OK
2. I try to install recovery - 4ext wants busybux
3. I downloaded busybox - but it wants a rooted devices I got a message that "unrooted device" and busybox is closed
So I don't have recovery menu
What could be the solution ?

w_hy said:
Hi,
I try to root my S-off /XTC Clip/ device, BUT:
1. 4ext pushed with adb - OK
2. I try to install recovery - 4ext wants busybux
3. I downloaded busybox - but it wants a rooted devices I got a message that "unrooted device" and busybox is closed
So I don't have recovery menu
What could be the solution ?
Click to expand...
Click to collapse
Read the instructions correctly. Install RUU. Put phone into FastBoot mode. Use ADB to push recovery to phone. Reboot into recovery. Flash superuser from zip. Reboot phone properly. Install BusyBox from Play Store.

steps made by me
SimonTS said:
Read the instructions correctly. Install RUU. Put phone into FastBoot mode. Use ADB to push recovery to phone. Reboot into recovery. Flash superuser from zip. Reboot phone properly. Install BusyBox from Play Store.
Click to expand...
Click to collapse
1. Install RUU. -- OK
2. Put phone into FastBoot mode. -- OK
3. Use ADB to push recovery to phone. -- OK
4. Reboot into recovery. -- NOT OK -- there is no recovery menu just the red triangle.

w_hy said:
1. Install RUU. -- OK
2. Put phone into FastBoot mode. -- OK
3. Use ADB to push recovery to phone. -- OK
4. Reboot into recovery. -- NOT OK -- there is no recovery menu just the red triangle.
Click to expand...
Click to collapse
Post the exact steps and output of what you're doing. Recovery obviously isn't getting successfully installed. Which recovery are you using as well?

Isn't fastboot flash recovery recovery.img the command to flash a recovery?
Sent from my Desire S using xda app-developers app

c.m.b said:
Isn't fastboot flash recovery recovery.img the command to flash a recovery?
Click to expand...
Click to collapse
Yes

SimonTS said:
Post the exact steps and output of what you're doing. Recovery obviously isn't getting successfully installed. Which recovery are you using as well?
Click to expand...
Click to collapse
Steps made by me:
1. installed RUU -- OK
2. downloaded recovery.zip, extracted recovety.img (same directory as adb/fastboot)
3. restart phone to bootloader, fastboot usb mode
4. used "fastboot flash recovery recovery.img" command
5. got the next output:
G:\0\1>fastboot flash recovery recovery.img
sending 'recovery' (3768 KB)... OKAY [ 0.655s]
writing 'recovery'... FAILED (remote: not allowed)
finished. total time: 0.655s
In the recovery.zip file there is a version file:
ext.version=1005.3.0
ext.build=0
and recovery.md5:
3fd4750734837f6bce55b63def1e0a8b

w_hy said:
Steps made by me:
1. installed RUU -- OK
2. downloaded recovery.zip, extracted recovety.img (same directory as adb/fastboot)
3. restart phone to bootloader, fastboot usb mode
4. used "fastboot flash recovery recovery.img" command
5. got the next output:
G:\0\1>fastboot flash recovery recovery.img
sending 'recovery' (3768 KB)... OKAY [ 0.655s]
writing 'recovery'... FAILED (remote: not allowed)
finished. total time: 0.655s
In the recovery.zip file there is a version file:
ext.version=1005.3.0
ext.build=0
and recovery.md5:
3fd4750734837f6bce55b63def1e0a8b
Click to expand...
Click to collapse
What#s your current hBoot? And make sure you using the recovery files from 4EXT_Recovery_v2.2.7_RC5.zip

SimonTS said:
What#s your current hBoot? And make sure you using the recovery files from 4EXT_Recovery_v2.2.7_RC5.zip
Click to expand...
Click to collapse
hboot is 2.00...
Can you give me a link for EXT_Recovery_v2.2.7_RC5.zip, please?

w_hy said:
hboot is 2.00...
Can you give me a link for EXT_Recovery_v2.2.7_RC5.zip, please?
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=21895635&postcount=172

SimonTS said:
http://forum.xda-developers.com/showpost.php?p=21895635&postcount=172
Click to expand...
Click to collapse
So:
hboot: 2.02.0002
s-off /xtc clip/
recovery.img: what you said /puted in new directory togeather with adb.exe and fastboot.exe/
command: as before
result: the same:
G:\0\4>fastboot flash recovery recovery.img
sending 'recovery' (5624 KB)... OKAY [ 0.987s]
writing 'recovery'... FAILED (remote: not allowed)
finished. total time: 0.988s

[Q] stuck in bootloop

I have the att one x, rooted, and twrp flashed onto the device. Me being stupid, i flashed viper x 2.6.0 and it worked great. I went to flash another rom and it was stuck in boot loop. now every rom i try to flash gets stuck in bootloop. Is there a way to fix this or just get it back to stock so i can start over again? Please help, ive tryed to run htcs ruu 2.20 to get back to stock but it wouldnt take. any help would be appreciated. thanks

omarh3 said:
I have the att one x, rooted, and twrp flashed onto the device. Me being stupid, i flashed viper x 2.6.0 and it worked great. I went to flash another rom and it was stuck in boot loop. now every rom i try to flash gets stuck in bootloop. Is there a way to fix this or just get it back to stock so i can start over again? Please help, ive tryed to run htcs ruu 2.20 to get back to stock but it wouldnt take. any help would be appreciated. thanks
Click to expand...
Click to collapse
if you're running hboot 1.14 and 2.20, go into recovery and wipe system, data, cache, etc.
flash the ROM you want, reboot bootloader and flash the boot.img via fastboot
"fastboot flash boot boot.img"
"fastboot reboot"
w/o quotes

I did that same thing, Do you have the international version? if so, then do the above.
If not, you may have overwritten your boot partitions. You'll have to run your device specific RUU. There are a few threads on here with different RUUs and links to outside sources to get the device specific RUU.
I say that you may have over written your boot partitions because ViperX 2.6 is for the international version only. My ROM ViperXL 2.1.2 is the one for us.

you should ruu back to stock then use your unlock token. can't believe you flashed an international after being in here for a little while.

I ran stock ruu and then tried to unlock bootloader, it says it was successful but it still says relocked and now when I tried to do it again with another unlock token it gives me an error message in cmd, same error when flashing recovery. It took me to the prompt on my phone asking if I wanted to unlock and I said I did but still says relocked in bootloader. Also won't let me flash recovery from goo so I can root.
Sent from my HTC One X using XDA Premium HD app

Viper X 2.6.0 and TWRP 2.3.1
I'm a newbie that recently rooted the att one x 2.20 firmware. I currently have boot loop problem that I would most appreciate advice on. I have twrp recovery 2.3.1 flashed. I used the backup function first to backup the rooted stock rom and then attempted to install ViperX 2.6.0. Here are my exact steps and problem in sequence.
1. I placed the ViperX zip file into the main phone directory.
2. I extracted the boot.img file from the Viper zip file and placed it into a desktop directory
3. I loaded fastboot usb and ran the command prompts to flash the boot.image. Getting the following message.
C:\android>fastboot flash boot boot.img
sending 'boot' (4302 KB)...
OKAY [ 0.631s]
writing 'boot'...
OKAY [ 1.134s]
finished. total time: 1.765s
4. Then I erased the cache based on instructions from onexroot.com
C"\android>fastboot erase cache
erasing 'cache'...
OKAY [0.121s]
finished. total time: 0.121s
5. Next I went into TWRP and used the wipe menu to do factory reset, wipe cache, and wipe dalvik cache in that order.
6. Go into Install menu and selected ViperX 2.6.0 zip file. Confirmed flash
7. Followed the installation guide - Full installation, non-custom kernel, full wipe.
8. The flash completed. Hit finished button.
9. The phone now boot loops on the HTC Think Brilliant screen with the legal disclaimer. I got back into the TWRP recovery tool and tried to restore my stock rom using the Restore menu. The script runs successfully, but then continues the bootloop at the Think Brilliant screen.
10. I repeated steps 1 to 8 twice but continue to have the bootloop. Am I missing steps to install Viper X or restoring my stock rom?

jzsqrd said:
I'm a newbie that recently rooted the att one x 2.20 firmware. I currently have boot loop problem that I would most appreciate advice on. I have twrp recovery 2.3.1 flashed. I used the backup function first to backup the rooted stock rom and then attempted to install ViperX 2.6.0. Here are my exact steps and problem in sequence.
1. I placed the ViperX zip file into the main phone directory.
2. I extracted the boot.img file from the Viper zip file and placed it into a desktop directory
3. I loaded fastboot usb and ran the command prompts to flash the boot.image. Getting the following message.
C:\android>fastboot flash boot boot.img
sending 'boot' (4302 KB)...
OKAY [ 0.631s]
writing 'boot'...
OKAY [ 1.134s]
finished. total time: 1.765s
4. Then I erased the cache based on instructions from onexroot.com
C"\android>fastboot erase cache
erasing 'cache'...
OKAY [0.121s]
finished. total time: 0.121s
5. Next I went into TWRP and used the wipe menu to do factory reset, wipe cache, and wipe dalvik cache in that order.
6. Go into Install menu and selected ViperX 2.6.0 zip file. Confirmed flash
7. Followed the installation guide - Full installation, non-custom kernel, full wipe.
8. The flash completed. Hit finished button.
9. The phone now boot loops on the HTC Think Brilliant screen with the legal disclaimer. I got back into the TWRP recovery tool and tried to restore my stock rom using the Restore menu. The script runs successfully, but then continues the bootloop at the Think Brilliant screen.
10. I repeated steps 1 to 8 twice but continue to have the bootloop. Am I missing steps to install Viper X or restoring my stock rom?
Click to expand...
Click to collapse
You are missing something. You are flashing a rom that isn't for your phone. ViperX could of killed your phone, you need to flash ViperXL. Try downloading ViperXL and repeat the steps again.
[ROM][OCT 31] Team Venom ViperXL 2.1.2 - Sense 4.1 | Venom Tweaks | OTA Updates

Trying to flash custom Rom ends up in clockworkmod to reboot...

Hi all,
I have the att one xl, carrier unlocked. I used it for a month now in my country with no problems, I had it rooted,bootloader unlocked etc.
I used clockworkMod to backup everything and to try to flash this ROM
http://forum.xda-developers.com/showthread.php?t=2075783
I followed the instructions on this page
http://www.teamandroid.com/2013/04/09/update-htc-one-xl-hatka-android-411-jelly-bean-custom-rom/2/
I got to the final step and rebboted phone. After that, problems began. It runs again the clockworkmod recovery and it says it cannot mount the sdcard. I read that i have to flash the stock ROM. I tried that getting the recovery.img from the clockworkmod backup folder nad now when phone reboots,it starts the clockworkmod but when i make i choice on this it goes for rebooting...
Any help please????

xtrg said:
Hi all,
I have the att one xl, carrier unlocked. I used it for a month now in my country with no problems, I had it rooted,bootloader unlocked etc.
I used clockworkMod to backup everything and to try to flash this ROM
http://forum.xda-developers.com/showthread.php?t=2075783
I followed the instructions on this page
http://www.teamandroid.com/2013/04/09/update-htc-one-xl-hatka-android-411-jelly-bean-custom-rom/2/
I got to the final step and rebboted phone. After that, problems began. It runs again the clockworkmod recovery and it says it cannot mount the sdcard. I read that i have to flash the stock ROM. I tried that getting the recovery.img from the clockworkmod backup folder nad now when phone reboots,it starts the clockworkmod but when i make i choice on this it goes for rebooting...
Any help please????
Click to expand...
Click to collapse
First off, I'd use TWRP since it's compatible with all ROMs and CWM has very little compatibility with our phone.
To do that, download TWRP 2.3.3.1 Check MD5
boot to bootloader/fastboot
then fastboot flash recovery twrpfilename.zip
then wipe cache, dalvik, system, factory reset in TWRP
Flash rom.
If you are on hboot 1.14, you then need to extrract the boot.img from the ROM's zip and fastboot flash boot boot.img
As for the not able to mount SDCard, did you factory reset in the bootloader?

Hey my friend thnks for the reply. I'll try all of these right now. If u can please follow the thread, I might have more questions...Thnks again!

I've reache the point where i mount again my sd card and making all thw wipe things...
I' ve installed the rom but after it says that is succesfully installed and rebooting it shows the htc logo and after that...nothing!
The device turns off(or at least i think it is)black screen, no charge little orange light...But when it comes to this mode, I can hear the soun of the pc like when u do connect a device!
What am I doing wrong?
And yes I have hboot 1.14. What is the correct sequence in the actions????

Did you extract the boot.img from the rom and then flash it using fastboot?
Sent from my One X using xda app-developers app

exad said:
First off, I'd use TWRP since it's compatible with all ROMs and CWM has very little compatibility with our phone.
To do that, download TWRP 2.3.3.1 Check MD5
boot to bootloader/fastboot
then fastboot flash recovery twrpfilename.zip
then wipe cache, dalvik, system, factory reset in TWRP
Flash rom.
If you are on hboot 1.14, you then need to extrract the boot.img from the ROM's zip and fastboot flash boot boot.img
As for the not able to mount SDCard, did you factory reset in the bootloader?
Click to expand...
Click to collapse
exad said:
Did you extract the boot.img from the rom and then flash it using fastboot?
Sent from my One X using xda app-developers app
Click to expand...
Click to collapse
Yes I did.
Booting in bootloader
going to fastboot and it changes to fastboot usb
typing in command prompt
>fastboot flash boot boot.img
I get
sending 'boot' (6076 KB)...
OKAY [ 0.901s]
writing 'boot'...
OKAY [ 1.528s]
finished. total time: 2.430s
from the bootloader options i choose recovery
phone restarts on twrp
I swipe everything out
I go to install and choose the zip file from the sd card which contains the rom
installation starts ok and it finishes saying all ok
I choose reboot in system from the twrp
(In this point i get a question on fixing root permissions and i choose yes)
after rebboting, htc logo comes up and after that...nothing...
Please help...

xtrg said:
Yes I did.
Booting in bootloader
going to fastboot and it changes to fastboot usb
typing in command prompt
>fastboot flash boot boot.img
I get
sending 'boot' (6076 KB)...
OKAY [ 0.901s]
writing 'boot'...
OKAY [ 1.528s]
finished. total time: 2.430s
from the bootloader options i choose recovery
phone restarts on twrp
I swipe everything out
I go to install and choose the zip file from the sd card which contains the rom
installation starts ok and it finishes saying all ok
I choose reboot in system from the twrp
(In this point i get a question on fixing root permissions and i choose yes)
after rebboting, htc logo comes up and after that...nothing...
Please help...
Click to expand...
Click to collapse
You're wiping after flashing the boot.img... so you need to reflash the boot.img don't wipe anything, just fastboot flash boot boot.img and then reboot the phone.

[Q] HTC One S can't pass the HTC logo

Hello
a few days ago I used "HTC ONE S AIO KIT" to install Jelly bean 4.2.2 on my HTC ONE S
I successfully installed the jelly bean and everything was fine
during the process, I created a backup from my phone in the ClockworkMod
today, I booted to ClockworkMod recovery > backup and restore > restore > and selected the backup file I created
the phone restarted and got stuck on the HTC ONE logo
I did everything I could in the past 2 hours, searching everywhere
even tried this command "fastboot flash boot "C:\...\boot.img"" but nothing worked - after doing this, the ClockworkMod gave me an error that said "can't mount /sdcard"
appreciate any help

Ok , I just updated to latest version of clockwork and still can not fix "can't mount sdcard" error
I have been doing this for 6 hrs now
can someone please help me ?

dnotoco some
jimlee2 said:
Ok , I just updated to latest version of clockwork and still can not fix "can't mount sdcard" error
I have been doing this for 6 hrs now
can someone please help me ?
Click to expand...
Click to collapse
install ruu original and unlok again is the most easiest for you

ZALACAYN2 said:
install ruu original and unlok again is the most easiest for you
Click to expand...
Click to collapse
thanks for the reply
I can't find the RUU for Fido/Rogers HTC ONE S
I searched for factory every where, I made a backup before but now I can't access the SD card to see if it it still there or not

jimlee2 said:
thanks for the reply
I can't find the RUU for Fido/Rogers HTC ONE S
I searched for factory every where, I made a backup before but now I can't access the SD card to see if it it still there or not
Click to expand...
Click to collapse
Well that is a pickle. Not having a RUU to fall back on.
Good news is you can still fastboot in bootloader.
So you can try different roms until one works. So at least you have a phone that works.
Push a rom to your phone
http://forum.xda-developers.com/showthread.php?t=1667929&highlight=adb+push
Flash a boot.img
http://forum.xda-developers.com/showthread.php?t=1752270&highlight=fastboot
fixing sd card mounting
http://forum.xda-developers.com/showthread.php?t=1630459

tivofool said:
Well that is a pickle. Not having a RUU to fall back on.
Good news is you can still fastboot in bootloader.
So you can try different roms until one works. So at least you have a phone that works.
Push a rom to your phone
http://forum.xda-developers.com/showthread.php?t=1667929&highlight=adb+push
Flash a boot.img
http://forum.xda-developers.com/showthread.php?t=1752270&highlight=fastboot
fixing sd card mounting
http://forum.xda-developers.com/showthread.php?t=1630459
Click to expand...
Click to collapse
I followed all these steps but I am not able to get it fixed
is it possible to help me via google talk or something? thanks

I get this error now when I try to flash a recovery
Code:
C:\Fastboot>fastboot flash recovery op
enrecovery-twrp-2.4.1.0-ville.img
sending 'recovery' (7820 KB)... OKAY [ 1.426s]
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.251s
I searched the forum and tried different methods to fix it but still no luck
I am going crazy over this problem

jimlee2 said:
I get this error now when I try to flash a recovery
Code:
C:\Fastboot>fastboot flash recovery op
enrecovery-twrp-2.4.1.0-ville.img
sending 'recovery' (7820 KB)... OKAY [ 1.426s]
writing 'recovery'... INFOsignature checking...
FAILED (remote: signature verify fail)
finished. total time: 2.251s
I searched the forum and tried different methods to fix it but still no luck
I am going crazy over this problem
Click to expand...
Click to collapse
Where did you download that recovery from?
Sent from my Nexus 7 using Tapatalk HD

khan.orak said:
Where did you download that recovery from?
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
from the original twrp site

Ok. Are you flashing the boot. img from the extracted rom zip that you are installing. I never used the c:/ blah blah. I always put the boot.img file in the same folder as adb and fastboot then with the phone in fastboot usb type fastboot flash boot boot.img in the command prompt on the computer. It sounds like you might have a bad recovery. Have you tried to flash a new recovery?
Sent from my HTC One using xda app-developers app