Hello
I received yesterdany my case UAG Protective Aero GLXS5 - Bleue (http://www.urbanarmorgear.com/products/aero-glxs5).
Feedback :
+ Comes with a tissue to wipe AND a protective cover glass
+ Science Fiction and "avionic" aspect, really great
+ Really great grip, it feels "comfortable"
+ Silky feel
+ Very very light, it feels almost no difference without the case
+ Even with the case it goes well into the pocket
+ Big advantage, the objective affects more directly the table
+ Mobile laid flat is stable (without the shell, it is a little wobbly because of the small reinforcement near the speaker)
+ Elements (reinforcement) on the side provide a non-slip grip too
+ Using it with a single hand is still possible without interference
+ Pressing buttons responds quickly and without having to press hard too
+ Connectors are not blocked, even with a "big" jack
- Covers of buttons (power, volume) give an impression of fragility. To see in use
In conclusion to this case UAG :
+ light
+ Excellent design
+ Good grip
I definitively prefer this to Spigen Though armor (see my post of comparison).
And some pictures :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Great review! I just ordered one of these cases as well. How noticeable is the silver bezel on the S5 with this case on? it's the one part of the device I really dislike.
undergrad said:
Great review! I just ordered one of these cases as well. How noticeable is the silver bezel on the S5 with this case on? it's the one part of the device I really dislike.
Click to expand...
Click to collapse
good choice! btw, what's this "silver bezel" ? (sorry, my english isn't rich enough... )
Corwin9S said:
good choice! btw, what's this "silver bezel" ? (sorry, my english isn't rich enough... )
Click to expand...
Click to collapse
Haha... It's the plastic silver rim around the phone. For some reason very few of the S5 case cover this. I find the silver pretty distracting personally.
Ah. Understood.
Look at the pictures. You only see it where to put the jack for ears stuff. And a little at bottom in USB port. Elsewhere it's not visible
Envoyé de mon SM-G900F en utilisant Tapatalk
Mine is on the way! Thanks for the pics and review; very well done. Looks like I made a good decision.
HimDroid said:
Mine is on the way! Thanks for the pics and review; very well done. Looks like I made a good decision.
Click to expand...
Click to collapse
I just ordered the clear one. Have had the same case on my GS3 forever and it has survived countless drops. Love the look and protection.
Related
Hey all, I received a Blue ZeroLemmon Razor Armor Case yesterday.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Everything was delivered in perfect condition, and was well packaged.
I wanted to compare it to one of my other cases for the phone, a White Ringke flex Slim Fusion Slim Armor.
The Ringkle, came with two plastic body shells and a screen protector. The two shells are nice but I have only used the textured one.
Ok. On to the comparison. First off, I can you tell the ZeroLemmon case rubber part is thicker, and provides more protection on all corners and edges of the phone.
This extra padding is great, and im getting use to the sharper corners and shape of the case to help hold the phone.
My Favorite feature so far is in the enginerring that went into the case. ALL THE PORTS AND HOLES LINE UP PERFECTLY! And the charging port is easy to access and open and easier than the Ringke.
Please respond to this post if you have any questions. Ill post some updates after I get a few days use out of it.
Thanks!
Update. Haven't had one single pocket dial since putting on the case. I'm not sure what color blue it is, but it matches my running gear.
..
Yeah, I am very happy with it. And do like the way it feels in my hand. I am going to try out my old case, the Ringke flex Slim Fusion Armor tomorrow, and see which one I like better.
I really do like the blue color, and have dropped my phone twice and it has been well protected.
ampm325 said:
Yeah, I am very happy with it. And do like the way it feels in my hand. I am going to try out my old case, the Ringke flex Slim Fusion Armor tomorrow, and see which one I like better.
I really do like the blue color, and have dropped my phone twice and it has been well protected.
Click to expand...
Click to collapse
Thanks for the comparison. We looking to see if this is the right amount of button pressure users will like. We look to apply this button pressure to other cases
The button pressure works just fine, and I like that they are bigger than the Ringke i compared it too.
The case also sits nicely around the edge of the bezel and leaves a nice border to allow easy screen shots with the gesture and for turning on the one handed mode
ZeroLemmon Case wins! I donated my old Ringke slim Armor to another s5 user, as the ZeroLemmon case is my choice.
The phone just feels better in my hand, and a better charging port access, plus i really like the color.
Cool! We are glad the pressure works out on the button. we have been tuning the case buttons for all our products to provide uniform pressures
Who have this case any recommendations?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Perfect
I have one, grey colour. After trying many cases, I think this one does the best job. It protects well and also leaves the phone accents to be easily seen.
Sure, I am not the biggest fan of TPU cases as they tend to loose in time, but this one is actually quite ok.
And one more thing: it definitely does not scratch the metal edges.
SUNUN said:
Who have this case any recommendations?
Click to expand...
Click to collapse
it's not a bad case,but beware if there's a dust will scratch the silver side of note 4...
also after 2month usage,the bottom of the case start loosing,but typical problem for tpu case after some times
Got similar TPU case and had to cut out the buttons they are so sensitive on this device it was going out and on up and down all the time
I have the grey one, it is very cheap. I don't like it, it fits well and is slim but I don't like the feel, shiny and rubbery makes it feel very cheap to me...I know it is cheap but I don't want my phone to end up feeling cheap
I would love to see pictures of a phone in this... right now there're just pictures of the backs themselves...
Hi,
I have a question to OP. Is the TPU case thick enough to protect the back camera from touching the ground surface when placing on table or floor etc?
I have purchased a cheap TPU case before but it leave the back camera exposed to the potential of scratching when placing on table. Currently using Spigen Neo Hybrid which works perfect but look a bit bulky.
Thanks.
I just hate the sticky rubbery feel of TPU. Just feels cheap to me. Also these TPU cases tend to sag and loosen over time.
I have this and a diztronic, diztronic is in a whole different league, still essentially a rubber case but so so much better and doesn't feel cheap.
Hey Guys,
I've just got hold of a Poetic Affinity HTC A9 case. Its a clear hard backed TPU case.
I'm not a fan of cases normally, my last case, an IMAK Cowboy case didn't last long (2 months) so I've been naked for the past couple of months.
I have since dropped the phone and now have two small scuffs on the bottom of the phone near the speaker holes.
Anyway, this case seems well made and is clear so it does show off the phone quite well.
Here are some photos:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The fit is very good, the bottom of the case and the side where the power button and volume rockers are have a softer gel type material, whereas the rest is rigid. This makes fitting and removing the phone very easy and also makes pushing the buttons easy. The rear is fully protected.
Some pics with case fitted:
The camera and flash have plenty of room and all the orifices are easily accessible and clear.
I will definitely make this my daily work case, as it has full protection and doesn't add much weight or bulk.
I wont do any drop tests but will keep everyone posted on how it fairs.
nick
crustyeyez said:
Hey Guys,
I've just got hold of a Poetic Affinity HTC A9 case. Its a clear hard backed TPU case.
I'm not a fan of cases normally, my last case, an IMAK Cowboy case didn't last long (2 months) so I've been naked for the past couple of months.
I have since dropped the phone and now have two small scuffs on the bottom of the phone near the speaker holes.
Anyway, this case seems well made and is clear so it does show off the phone quite well.
Here are some photos:
View attachment 3656925
View attachment 3656926
View attachment 3656927
The fit is very good, the bottom of the case and the side where the power button and volume rockers are have a softer gel type material, whereas the rest is rigid. This makes fitting and removing the phone very easy and also makes pushing the buttons easy. The rear is fully protected.
Some pics with case fitted:
View attachment 3656928
View attachment 3656929
View attachment 3656930
View attachment 3656931
View attachment 3656932
The camera and flash have plenty of room and all the orifices are easily accessible and clear.
I will definitely make this my daily work case, as it has full protection and doesn't add much weight or bulk.
I wont do any drop tests but will keep everyone posted on how it fairs.
nick
Click to expand...
Click to collapse
Where did you ever find a case like this? I've been searching forever for a case just like this one here lol
http://www.amazon.com/Affinity-Prem...d=1455234087&sr=1-2&keywords=htc+one+a9+cases
crustyeyez said:
http://www.amazon.com/Affinity-Prem...d=1455234087&sr=1-2&keywords=htc+one+a9+cases
Click to expand...
Click to collapse
You can find one here mate.
crustyeyez said:
http://www.amazon.com/Affinity-Prem...d=1455234087&sr=1-2&keywords=htc+one+a9+cases
Click to expand...
Click to collapse
Sweet, thanks!
Ordered one yesterday, and it arrived today. I'm digging it so far.
Sent from my HTC One A9 using Tapatalk
Wassup guys just a little review. Got my 1st case in today. Wish i had the phone to go inside it. 2 part case.
1st impressions....very nice case. Great feel to it. Light and comfortable. May be a little slippery but not too bad. Sides do offer some grip tho with rubberish material. Great finish on it with the coral blue. Kick stand feels decent stays in place when open and snaps back closed when needed. Button press seems like it will be fine but cant tell until phine arrives. Over all protection id rate 6 out of 10.
1 of the things i noticed first was how thin the case was. This is not a bad thing. Im comming from a note 4 with a verus thor case and can fit the new case almost inside the verus thor note 4 case. This is good relating to actual phone size. My note 4 was slightly too large to properly hold it in my hand. This seems like it will be nearly perfect for me.
2 things im worried about.....when the phone is in the case and face down im hoping it leaves a gap between the surface and screen. I believe it does but again i need my phone to tell.
2 inner part of kickstand. Im worried about it somehow scratching the back glass of the phone. Anyone know where to get a rear body plastic protector?
Check out some pics. Hope this helps.
Nice. I was checking those out. I bought 5 Thors for my N4 at $3 each. Waiting for that sale again from Verus. Bring on the N7!
Buy a premium metal glass phone and put it into a plastic rubber case breaks my heart. Waiting for the drop tests if it's durable I will add skin on the back to only remove those finger prints and make the phone less slippery. Maybe some mental frame would be cool too, but then phone becomes more bullky.
I got the VRS TPU case. Looks pretty awesome so far!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my SM-N920V using XDA-Developers mobile app
So, I have always hated taking a beautiful sleek phone and encasing it in thick plastic or giant black cases. With waterproofing etc phones go more places than ever but I've hated most of the semi thick case options. Bulk, feel, thickness.
Enter the TORRAS crystal clear case (Amazon). I've purchased cheap hard plastic thin cases before looking for light corner protection but ultimately a good feel and no bulk. They were OK. This thing is exactly what I want. If you're a minimalist case person. Highly reccomend.
PROS:
Matches the whitestone screen cover near perfectly. No spacing on sides (goes straight from screen protector to case) and maybe a millimeter at top and bottom)
Raised lip top and bottom for screen protection
Its slick so slides in and out of coat pockets and jeans easy yet grips enough in hand
Rubbery feel has SOME impact protection. Especially in corners.
Has seperate sections for camera and finger sensor. It has actually kept me from touching the camera 100% of the time. Don't know why others don't do this.
Dot pattern inside keeps the "wet spot" look way
Colored edges (optional) give a great look.
It was 13 bucks. It's almost a no brainer.
Link
ekerbuddyeker said:
Link
Click to expand...
Click to collapse
@ekerbuddyeker
I'm guessing this would be it,take your pick of the three color options:
https://www.amazon.com/TORRAS-Cryst...TORRAS+Crystal+Clear+Galaxy+Note+9+Case&psc=1
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
KOLIOSIS said:
@ekerbuddyeker
I'm guessing this would be it,take your pick of the three color options:
https://www.amazon.com/TORRAS-Cryst...TORRAS+Crystal+Clear+Galaxy+Note+9+Case&psc=1
Click to expand...
Click to collapse
I like the case but find it a bit slippery to hold. The sides are pretty slick.
Nice case, but I Prefer no button covers...
steelersmb said:
I like the case but find it a bit slippery to hold. The sides are pretty slick.
Click to expand...
Click to collapse
When new it was good with grip. After a few days and the oils built up on the case it became more slick.
Sent from my SM-N960U using Tapatalk