I have been faffing about with S-OFF and the like in an attempt to de-brand my phone to stock HTC with root (the handset was an Orange UK CID). I've been at this for a couple of days now and have seemingly got myself stuck in a corner with the 2.0 hboot, which seems to be what's causing the problem for me - I was previously able to run the stock ICS RUU, but can't any longer.
Handset: HTC One SV LTE (model ID PL8010000)
*** UNLOCKED ***
K2_UL PVT SHIP S-OFF RL
CID: HTC__001 (have also been in SuperCID 11111111 numerous times)
HBOOT: 2.00.0000
RADIO: 1.15.40a.00.04
OpenDSP: v9.2.0268.1214
eMMC-boot
Mar 14 2013, 22:10:43-1
OS at the moment is Viper, because that's all I can get to install. None of the OTAs work (various errors relating to parsing android-info.txt and remote access issues in fastboot). The trouble with Viper is that the radio is apparently knackered, because I can't get a signal at all, and I was on stock JB and on ICS.
If anyone can provide me with a stock ICS 1.00.0000 HBOOT, I can try the RUU again at least. OTAs don't work from there, but it'd be a start. Any other ideas would also be greatly appreciated!
EDIT: Sorry, I forgot I'd already found a stock HBOOT and used it earlier, so have done that again now. Have now run RUU and am on stock HTC__001 version of ICS (K2_UL_ICS_40_HTC_Europe_1.17.401.5_R_Radio_0.12.40.00.14_2_10.49.40.11L_release_301902_signed). However, I still need help getting updated through the OTAs, of which I have 3 in .zip form:
OTA_K2_UL_JB_45_S_HTC_Europe_2.14.401.2-1.17.401.5_R_release_308698hqk34kifwjk0g071
OTA_K2_UL_JB_45_S_HTC_Europe_2.14.401.6-2.14.401.2_release_311966gsyc11xrfb40ox3c
OTA_K2_UL_JB422_SENSE50_MR_HTC_Europe_3.11.401.1-2.14.401.6_release_338297mseg08soslxcubit
METHOD 1:
When I try to run any of the above via fastboot oem rebootRUU, it fails and says it can't parse android-info.txt. I've checked the android-info in all three files, and the CID I have on the handset is listed in there, and the model ID is correct. I have verified with fastboot getvar cid that the CID is indeed HTC__001, so I don't understand what the problem is.
METHOD 2:
I've tried re-locking the bootloader and running again, but that still fails as above.
METHOD 3:
I've also tried just flashing the firmware.zip alone, but that spits out errors relating to the checks at two early stages in the updater script:
assert(check_cid(getprop("ro.cid") - I'm not sure why that fails given that the CID is correct for the OTAs, but it works if I just delete this check
assert(getprop("ro.product.device") == "k2ul" || - again, this is the correct device I'm trying to apply the OTA to, so I don't understand the issue
Sorry about the confusion in the initial post; any help would be greatly appreciated!
Your task should basicly be the easiest today, lol.
Get back to SuperCID, flash the RUU again (if needed, the 1.0 hboot before), and then, when phone is booted into android, let it search for updates.
Download and installing should go fine, because you are stock from the RUU and have SuperCID. Do this until no updates left and you are on 4.2.2.
You can also orientate on this guide.
old.splatterhand said:
Your task should basicly be the easiest today, lol.
Get back to SuperCID, flash the RUU again (if needed, the 1.0 hboot before), and then, when phone is booted into android, let it search for updates.
Download and installing should go fine, because you are stock from the RUU and have SuperCID. Do this until no updates left and you are on 4.2.2.
You can also orientate on this guide.
Click to expand...
Click to collapse
Man, I am so sorry. Not only did I fix this myself, I found out what I'd done to cause the ballsup. You know how I said I was getting 0 signal on the network? When changing the CID, I had accidentally overwritten the first 4 digits of the IMEI, so it wasn't recognised as valid any more. Just re-edited mmcblk0p4 to reinsert the original IMEI and it's now getting a signal. Prior to that, I managed to flash HBOOT 1.0 and run RUU then flash the OTAs manually. Have also reflashed TWRP 2.7 and backed up so I can hopefully recover faster from any more mess I make for myself...
Having said that, when I was trying to get the OTAs actually over-the-air, it kept reporting no updates available. Do you think that's just a result of the IMEI issue or do I need to be fully S-ON and locked (as in HTCL) to get OTAs? Do I also need the stock recovery?
Thanks very much for the reply, mate. I wouldn't have been able to do this stuff without your guides and replies on this forum, as well, so I'm grateful for your help.
Well, hard to say with your OTAs, because i never had a non-working CID.
But to run the official OTAs you need for sure a stock recovery!
old.splatterhand said:
Well, hard to say with your OTAs, because i never had a non-working CID.
But to run the official OTAs you need for sure a stock recovery!
Click to expand...
Click to collapse
The CID's fine, it's just the fact I overwrote it onto part of the IMEI... at one point I had manually edited HTC__001 into mmcblk0p4 then later rewritten it via the set cid command, which resulted in that line of the file being set to "HTC__001_001" because I'd keyed it in with the _001 overwriting the first 4 digits of my IMEI. Because I am an idiot, it would seem. Nonetheless, when I was requesting the updates OTA the CID was working fine. However, I only had stock recovery *some* of those times I tried to get OTAs, and I can't say whether the IMEI ballsup was there right from the start or not because I have no idea when I did that. I'll possibly reflash from the RUU again at some point and attempt an OTA on stock recovery with the correct IMEI, but for the time being I'm playing around with Viper because half the reason I started faffing about in the first place was that I thought some of the stock bloatware on the Orange firmware was possibly slowing down the handset (which it evidently was, since it remained slow post-fstrim) and Viper lets me strip the HTC crap out as well.
Anyway, sorry about the dimwittedness, and thanks very much for your help! :good:
Related
Guys,
I have found a definite issue regarding trying to debrand and flash the 2.3.4 OTA update to my Bell debranded sensation...Here are my steps and results...
1. Performed Revolutionary on shipping Bell Canada Sensation
2. Changed CID to 11111111 via fastboot.
3. Flashed generic UK 1.35.401.1 software via RUU file.
4. Downloaded 2.3.4 OTA update.
5. Try to install the OTA update.zip from recovery, it errors out with Status 7 error. No matter what CID I use, I always get this error status 7.
6. Change CID to HTC__E11 to try and get the OTA update automatically, Downloads and then gives me a "variant system software" error when it goes to install. I've never heard of or seen this error before.
7. Run Revolutionary again and then flash the update.zip. It appears to successfully flash, but when the phone reboots, all I get is a black screen. the phone makes noises and appears to be functioning somewhat, but screen is black.
8. I am now thinking, great, I just bricked my phone...
9. Reboot into hboot. It still shows Bootloader of 1.17.0011, which is strange because the OTA is supposed to update it to 1.18.0000.
10. I then change the CID to 11111111 and reflash with the 1.35.401.1 RUU and thank god the phone is back to working condition.
It appears that there is either a hardware difference or something really low level that is being changed with this new update and it might not work properly with the different radio from the Bell Canada version with the 850/1900 radio, but I don't understand why flashing to the 1.35.401.1 RUU works fine. If anyone else can shed any light on this or give me any hints, I would appreciate. I thought my experiences might help the devs out there further understand the new OTA and the Sensation software/hardware. My end goal is to have the most up to date stock unbranded software installed on my Sensation. I am using with AT&T if anyone is wondering.
Y2J
y2jdmbfan said:
Guys,
I have found a definite issue regarding trying to debrand and flash the 2.3.4 OTA update to my Bell debranded sensation...Here are my steps and results...
1. Performed Revolutionary on shipping Bell Canada Sensation
2. Changed CID to 11111111 via fastboot.
3. Flashed generic UK 1.35.401.1 software via RUU file.
4. Downloaded 2.3.4 OTA update.
5. Try to install the OTA update.zip from recovery, it errors out with Status 7 error. No matter what CID I use, I always get this error status 7.
6. Change CID to HTC__E11 to try and get the OTA update automatically, Downloads and then gives me a "variant system software" error when it goes to install. I've never heard of or seen this error before.
7. Run Revolutionary again and then flash the update.zip. It appears to successfully flash, but when the phone reboots, all I get is a black screen. the phone makes noises and appears to be functioning somewhat, but screen is black.
8. I am now thinking, great, I just bricked my phone...
9. Reboot into hboot. It still shows Bootloader of 1.17.0011, which is strange because the OTA is supposed to update it to 1.18.0000.
10. I then change the CID to 11111111 and reflash with the 1.35.401.1 RUU and thank god the phone is back to working condition.
It appears that there is either a hardware difference or something really low level that is being changed with this new update and it might not work properly with the different radio from the Bell Canada version with the 850/1900 radio, but I don't understand why flashing to the 1.35.401.1 RUU works fine. If anyone else can shed any light on this or give me any hints, I would appreciate. I thought my experiences might help the devs out there further understand the new OTA and the Sensation software/hardware. My end goal is to have the most up to date stock unbranded software installed on my Sensation. I am using with AT&T if anyone is wondering.
Y2J
Click to expand...
Click to collapse
I would venture to guess you're not aware that you should probably not (at least not now), do an official FOTA/OTA on an unauthorized S-OFF Sensation.
The official HTC 2.3.4 OTA that came out a few days ago, LOCKS your device. It puts it back into an S-ON state.
Unless something has changed, if you have S-OFF via Revolutionary....stay far away from official HTC updates.
Something has changed...revolutionary now supports the new "locked" bootloader!
Hoggles said:
I would venture to guess you're not aware that you should probably not (at least not now), do an official FOTA/OTA on an unauthorized S-OFF Sensation.
The official HTC 2.3.4 OTA that came out a few days ago, LOCKS your device. It puts it back into an S-ON state.
Unless something has changed, if you have S-OFF via Revolutionary....stay far away from official HTC updates.
Click to expand...
Click to collapse
I'm well aware that the the official HTC 2.3.4 OTA locks the device. As long as I have a debranded Sensation running the latest and greatest firmware/software, that is all I am looking for. And now that Revolutionary works on the new HBOOT there shouldn't be much trouble getting back to the original shipping software. I still am curious as to what is causing this "Error Status 7" error code.
So how can I update my sensation with s-off?
A bug in me from being updated.
That would really interest me too! don't want to be S-ON again to make this update. Another question (maybe off topic): how can i update to new S-OFF version 04pre4? I'm now on 03pre7.
Hi
I have the exact same problem as yours, what can we do to update it?
Same on Swisscom-branded phone
I tried the OTA on my swisscom phone, it reboots and I get an exclamation mark with a blue droid. Waited 10 minutes just in case, but no change.
Removed battery and rebooted. Phone still ok, but not updated obviously.
I'm not sure it will remove S-OFF, but I don't care, HTC provides an official procedure for that and we have what we need.
But I need this update to work on my rooted, S-OFF stock sensation. Will try again anyway...
EDIT: I tried going into recovery and manually flashing the OTAxx.zip file, but it gave me an assert_failed: check_cid!? Though I never changed the phone CID! So why propose me an update on my phone if it's the wrong one??? Not sure I want to change the CID of my phone now.
Hi All,
There are more and more reports coming in from people who ended up with a dead/bricked phone after the JellyBean Update 4.1.1 , 3.16.401.8 OTA. As you connect it to your PC you will soon find out it's in QHSUSB_DLOAD mode.
The purpose of this threat is to see how many people are affected, what people have done to attempt to recover their phone, and to find a possible solution (this chance seems rather small though).
There are alot of post about this in the JellyBean Speculation/News/Discussion threat, starting from page 157.
There are 2 threats about it in Q&A:
One S in QHSUSB_DLOAD mode
My HTC to really died
Reported attempts to recover:
QHSUSB_DLOAD Fix by team Unlimited
Unbricking HTC devices with the QHSUSB_DLOAD issue tutorial by kgs1992
Step 3 (and some others) from [TUT] Downgrade/Unbrick Ville S4
Another HTC one V recover guide where i can't find the link for.
Please report here if you have this issue. Please mention your CID, in what country you downloaded the OTA, the software version you upgrade from and the hboot version.
Also any new ideas to recover our phones our self are welcome!
My phone:
2.31 Unbranded Europe
1.14 Hboot
Downloaded in The Netherlands
1111111 Supercid
I have exactly the same problem, waiting...
As far as I know the issue is only caused by people who previously had SuperCID.
Sent from my HTC One S using Tapatalk 2
usaff22 said:
As far as I know the issue is only caused by people who previously had SuperCID.
Click to expand...
Click to collapse
I thought I saw a report of a fully stock device and one htc__001 cid as well. I can't find them at the moment, but this is also why I started this threat. But there seem to be more of these reports of supercid indeed, though there are also allot with supercid who successfully updated.
My phone is bricked too
Orginal CID was HTC_0001 (maybe), branded by 1&1 Germany
but changed to 11111111 to flash a unbranded RUU (what had worked)
I had Stock Recovery and relocked bootloader
My phone is bricked too
SuperCID 11111111 Hboot 1.14 Recovery Stock y Relocked bootloader.
My phone is bricked too
Orginal CID was HTC_203 (maybe), not branded by telecom company - France
but changed to 11111111
I had Stock Recovery and relocked bootloader and flash the 2.31 RUU
hellgod said:
My phone is bricked too
Orginal CID was HTC_203 (maybe), not branded by telecom company - France
but changed to 11111111
I had Stock Recovery and relocked bootloader and flash the 2.31 RUU
Click to expand...
Click to collapse
Dam it didnt mean to hit thank so enjoy that lol.
@Vauix, did you run a RUU before updating? if so what one?
let's discuss who and what options tried to output the list of sections? How you think why it happened?
All of them seem to be caused by SuperCID. But the updater script allows flashing for SuperCID, so I wonder why they get bricked.
Sent from my HTC One S using Tapatalk 2
I agree with you. But what it is necessary to undertake that Ubuntu saw sections?
Same here.
SuperCID and ota
Now nobody can call me
Same here.
SuperCID too
Darknites said:
Dam it didnt mean to hit thank so enjoy that lol.
@Vauix, did you run a RUU before updating? if so what one?
Click to expand...
Click to collapse
Yes I ran a RUU prior to flashing this update, i didn't chance anything to the rom yet but to search for the OTA. it was the RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed.exe
I thought about my supercid before I ran the RUU but i thought the worst thing that could happen was i could get a error that it couldn't flash it.
Its rather weird that some guys with supercid managed to flash it successfully. And i still think I saw some people with other cid's with bricked devices.
SuperCID too, previously Vodafone germany, unbranded an relocked ...
I ran the OTA update twice on my supercid'd device successfully.
In opposite to what I could read here, my bootloader was unlocked before and still after the update.
The first time I ran the update I forgot to reflash stock recovery. The phone started updating and rebooted, but no changes had happened. After restoring stock recovery and downloading the update again, I successfully updated.
As I couldn't get root I restored Venom and downgraded my new hboot from 2.15 to 1.06.
Today I started a second try successfully without a glitch.
Basically I keep an untouched nandroid backup of every new rom installation on my local harddisk. This means in case of custom roms I do a nandroid before the first boot.
As this is not possible on stock recovery I change back to custom recovery after the first boot, doing my backup then. I'm just checking the needed boxes otherwise I only proceed during the setup - the complete customization is done afterwards.
In this case I restored a backup called 2012-08-23--08-18-16_htc_stock_2.31
Stock here means: No apps, no customizations, no nothing, simply: stock and supercid.
After that was done I restored apps with Titanium.
That's how it worked (pretty simple) Maybe this will help you find some reasons for what has happened to your devices.
Same problem here...
SuperCID
All people here seem to have SuperCID, I have not.
I got my ville for about 7 months now and never had SuperCID.
I did it like everytime:
-Wiped everything ( Data / Cache / System )
-Flashed Stock Recovery
-Relocked
-Flashed 2.31 Europe RUU in Bootloader ( yes, that works but I guess noone knows )
-Downloaded 4.1.1 Update and let the Device do its magic
Now my phone is bricked.
Strange enough, a good friend of mine whos barely able to use its phone, got the same issue.
Im 100% sure he doesnt have any modifications done to his device.
Already tried the Ubricking-Tutorial but the Partitions just dont show up :-/
I did the super CID, too. No my phone is dead. Won't even charge.
I tried to do Enumerating the partitions but could only find up to 3. No 4 or 12.
Please help :crying:
SuperCID, German ONE S unbranded. Dead.
Unbrick/Downgrade instruction did not work here.
Do I need a new mobile? A question that I often imagine in the last days... What's the situation?
Here are the base informations of my HTC One S:
Original CID: O2___102
Actual CID: 11111111
Boootloader informations:
VLE PVT SHIP S-ON RL
HBOOT-2.13.0000
RADIO-1.11.50.05.28
OpenDSP-v31.1.0.45.0815
eMMC-boot
Nov 20 2012, 15, 15:44:01:-1
The story
What happens. Because of the license mess with CyanogenMod I've tried different ROM's but all in all there where always a reason to change the ROM. After all I want to give Carbon a try but for this you have to upgrade the firmware and so the mess starts.
In fact o2 Germany is not able to deliver a proper RUU I've changed the CID to SuperCID (11111111) and tried to install the RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8_Radio_1.11.50.05.28_10.27.50.08L_release_301814_signed_2_4. This and all my other installations of different RUU's breaks with a signature error. Next step was to change the CID to HTC__102 but this didn't help anything.
Now I was thinking to go back to the root and install the first custom ROM I've used. So I want to give ViperROM a try. With this it was not able to get the WiFi up and running. Next step was to give TrickDroid 10 and ZenROM a chance. There was no problem with the installation and both of them where running. The problems here are that both of them are far away from a daily driver.
Today I saw that there are again official CyanogenMod nightlies and so I've thought to install the base ROM of so many custom ROM's. This installation breaks with the error message: "failed : getprop("ro.bootloader") == 2.15.000" So It seems that the newest bootloader is a basic requirement. The problem is now that I'm unable to get the newest hboot because of the RUU signature problem.
I don't know what to do anymore. RUU update does not working. S-OFF does not working. The firmware upgrade is not working. Do I have to use the One S as a paperweight?
So .. I'm really grateful and happy about every hint, every tip or solution.
Thanks a lot
Christian
Why is S-OFF not working and why did you changed your CID back to stock? You have to get S-OFF and SuperCID so follow this guide. Report back at which step you fail
Uwe303 said:
Why is S-OFF not working and why did you changed your CID back to stock? You have to get S-OFF and SuperCID so follow this guide. Report back at which step you fail
Click to expand...
Click to collapse
Good morning,
sorry for my late response. I was so frustrated that I went off yesterday evening.
I've tried different things with the CID:
changed the O2___102 to 11111111
changed the 11111111 to HTC__102
rollback to 11111111
The reason was that I had found the RUU instructions which stated that there could be potential problems with RUU installations and SuperCID.
Based on this thread the S-Off always stops at step 5. I get an error message that says: "FAILED (remote: 99 unknown fail)". I've already tried the different things. Switch off the phone, switch off the computer, useing the original HTC USB cable and so on. Nothing worked here.
Thanks a lot
Christian
Try updating the HTC drivers on your PC then try again. There's a thread somewhere around the One S forums.
After the soff, supercid is not needed anymore.
Have you tried o2 ruus from a different country?
Btw is the ruu erroring because of your MID? Whats yours? Pj4010000?
Sometimes if a ruu errors, directly retrying sometimes works.
Verstuurd van mijn HTC One S met Tapatalk
YES! It's again up and running
After some days of troubleshooting my One S ist up and running again
First was the tip of djsubtronic. I've checked the drivers on my PC. But I've already installed the latest one. Then I've made a clean, fresh new installation on my notebook. But nothing changed.
Then I've tried some other RUU's. But there where always the same error. So... after all I was already looking for a new mobile device and then I've made a final attempt.
Cleaned storage from bootloader
Reset from bootloader
Installed TWRP recovery (2.5.0.0)
Format the sdcard from Windows
Nothing left on the sdcard
System reset from TWRP
System wipe from TWRP
Followed step by step and extreme exactly the instructions of the firmware update thread
The second try to manual update the hboot then was succsessful
After that I was able to install the latest CyanogenMod nightly
Thanks a lot for every tip. They took me to re-read everything again and then start again from scratch. After all I'm already S-On. I'm happy that my phone is running again, I just do not quite trust myself to tackle the topic...
Thanks again...
Christian
Nice to hear you have your phone up and running again.
I want to ask something.
I too, don't have JB RUU for my carrier of the device.
So will S-off and subsequently changing CID to something which has an RUU help? Will that RUU work?
My basic purpose is to go fully stock.
Sent from my Nexus 7 using Tapatalk HD
khan.orak said:
Nice to hear you have your phone up and running again.
I want to ask something.
I too, don't have JB RUU for my carrier of the device.
So will S-off and subsequently changing CID to something which has an RUU help? Will that RUU work?
My basic purpose is to go fully stock.
Sent from my Nexus 7 using Tapatalk HD
Click to expand...
Click to collapse
Hi, if I understand this correct than yes. If you change the CID to a "non branded" CID. (SuperCID - 111111 or HTC - HTC__102) you should be able to install other RUU's for your device. I don't know why this didn't work for me but for normal this should work.
Christian
chmarx said:
Hi, if I understand this correct than yes. If you change the CID to a "non branded" CID. (SuperCID - 111111 or HTC - HTC__102) you should be able to install other RUU's for your device. I don't know why this didn't work for me but for normal this should work.
Christian
Click to expand...
Click to collapse
From what i have read and understood, yours must be a problem of MID. This is another requirement in addition to CID.
Sent from my Nexus 7 using Tapatalk HD
Hello everyone.
I am new to this part of the forum for i just received a somewhat non working AT&T HTC ONE XL from a friend.
I presume he did not read much into his issue at the time and messed up this phone one way or the other.
Basically the phone works, just not as a phone.
So i will take my time to explain the whole situation with as much detail as possible.
I am personally familiar with rooting, setting up recovery and installing custom roms on android phones (just not on this model yet).
The phone details in its current state are:
- android version 4.0.4
- htc sense version 4.0
- software number cleanrom 4.5 beta2
- htc extension version htcextension_403_1_ga_20
- kernel 3.0.8-01564-gdc95f45
- baseband 0.16.32.09.01_3_10.79.32.08L
As soon as i received the phone, i contacted at&t to ask for an unlocking code, they gladly oblige.
I insert the new SIM card (non AT&T) and the phone asks me to insert the code. After correctly inserting it, the phone accepts the code and proceeds to reboot. After the reboot i get the phone locked screen again and asks me for the code one more time.
At this point i start searching online for the official firmware from htc for this specific model and find the 4.2.2 version and proceed to install it according to their requirements and steps (in manual mode from a desktop pc since the rom installed doesn't have the update feature).
The process gets locked at a point and cannot proceed further.
Phone boots normally again and i decide to do a factory reset. This i when i notice a teamwin custom recovery was installed which is what is blocking the official rom installation.
So at this point i am open for ideas.
I'm positive the issue is not very hard to solve but i also know that i am missing the original recovery. I can only guess no official updates were installed so the phone was running the original 4.0.4 version.
Meanwhile i will be scouting this forum on how this phone exactly works for i understood that there were two forms of recoveries for it (one full and one partial).
I still don't know the recovery version, if it's good, how to access it (different combinations of volume and power pressing didn't work for me).
Finally your opinion on how to make the phone unlocking code work, as in would i need to go back to official, or would a custom different rom work as a solution.
Wish you guys a good day and awaiting your feedback.
Cheers.
Need more info. Boot into bootloader by holding down both the volume down rocker and the power button. After the power button is held for a few seconds, you should see the capacitive buttons flash a few times, and the phone will reboot. Let go of the power button, but DO NOT let go of the volume down rocker until the while hboot screen comes up. When you see the hboot screen, tell us what it says.
In particular, we need to know if it says s-off or s-on, if it says CID 11111111, and hboot version. Also, if it says LOCKED, UNLOCKED, or RELOCKED.
Official RUU will not run if the bootloader is UNLOCKED (needs to be RELOCKED or LOCKED). But be aware, if the phone is superCID and s-on, running a Jellybean RUU or OTA will brick the phone. Which is one of the reasons we need the bootloader info.
RUU does not need to have stock recovery to run, only OTA does. My guess is your bootloader is unlocked, or its the wrong RUU. Any error message when the RUU fails (if so, what does it say)?
Hi, thank you for your quick reply.
I'm going to write down all that is written in the recovery for i still don't understand what locked or unlocked means, s-on or s-off.
anyway, here goes:
tampered
unlocked
evita pvt ship s-on rl
hboot-1.09.0000
radio-0.16.32.09.01_3
opendsp-v25.1.0.32.0405
emmc-boot
i can't find anything related to cid and i'm still not used to this recovery just yet. wouldn't want to press anything just yet.
i hope i gave enough info and i guess it doesn't look too good just yet.
thank you again for your help.
you should remind me to reduce the use of "just yet".
i'm doing some more reading about superCID and S-on or S-off.
I understand there's a utility from this thread that could determine the supercid status.
http://forum.xda-developers.com/showthread.php?t=1672284
again i'd like to point out i have no clue what has been done to this phone so i am trying to handle it with as much care as possible in order not to brick it.
in case superCID is 1111111 and naturally i don't have the original CID, where would that leave me?
As i am understanding slowly how this phone works, if the previous user managed to install a custom rom and a custom recovery on it, would only make sense to assume the superCID has been modified? (i'll be running the tool shortly unless someone jumps and says NOOOOOOOOO don't do it!!!)
I also noticed the teamwin recovery installed is 2.1.8.1
next is understanding what s-on and s-off are all about.
i have a feeling my chances of reverting to stock firmware are slimming. this is quite a complicated phone, nice challenge.
i'm going to point out again what my main problem is: i can't unlock the sim using the code provided by at&t since as soon as the phone reboots it asks me again. so i don't mind whichever route to take, whether custom or stock, as long as i can unlock the sim the simple way.
cheers.
srasiroslayer said:
At this point i start searching online for the official firmware from htc for this specific model and find the 4.2.2 version and proceed to install it according to their requirements and steps (in manual mode from a desktop pc since the rom installed doesn't have the update feature).
The process gets locked at a point and cannot proceed further.
Phone boots normally again and i decide to do a factory reset. This i when i notice a teamwin custom recovery was installed which is what is blocking the official rom installation.
Click to expand...
Click to collapse
This is not correct (the text I've bold faced above). OTA requires stock recovery, but RUU does not.
What stopped the RUU from working, is that you bootloader is unlocked (as indicated by the "unlocked" text in hboot). But in your case, you are lucky, since if you were trying to run the 3.18 Jellybean RUU, if it had gotten past the bootloader lock check, it would have bricked the phone (known bug) if you have SuperCID (which is pretty likely).
To reiterate: DO NOT try to relock the bootloader and run the 3.18 RUU, as with S-on and SuperCID, this will brick your phone.
If you have a working adb/fastboot environment, you can easily check CID with the command: fastboot getvar all
---------- Post added at 10:26 AM ---------- Previous post was at 10:23 AM ----------
srasiroslayer said:
i have a feeling my chances of reverting to stock firmware are slimming.
Click to expand...
Click to collapse
That is far form the truth. Getting back to stock is not that hard.
But if you only want to SIM unlock, I'm not sure that going stock will necessarily help you. You are on CleanROM now, which is pretty close to stock, and I don't think there have been many issues getting SIM unlock on CleanROM.
redpoint73 said:
This is not correct (the text I've bold faced above). OTA requires stock recovery, but RUU does not.
What stopped the RUU from working, is that you bootloader is unlocked (as indicated by the "unlocked" text in hboot). But in your case, you are lucky, since if you were trying to run the 3.18 Jellybean RUU, if it had gotten past the bootloader lock check, it would have bricked the phone (known bug) if you have SuperCID (which is pretty likely).
To reiterate: DO NOT try to relock the bootloader and run the 3.18 RUU, as with S-on and SuperCID, this will brick your phone.
If you have a working adb/fastboot environment, you can easily check CID with the command: fastboot getvar all
---------- Post added at 10:26 AM ---------- Previous post was at 10:23 AM ----------
That is far form the truth. Getting back to stock is not that hard.
But if you only want to SIM unlock, I'm not sure that going stock will necessarily help you. You are on CleanROM now, which is pretty close to stock, and I don't think there have been many issues getting SIM unlock on CleanROM.
Click to expand...
Click to collapse
Wunderbar,
Thank you again for clarifying things up.
I've been taking this time to read more about this phone on this thread:
- http://forum.xda-developers.com/showthread.php?t=1671237
So i am starting to understand how it works.
i have to admit that i should consider myself lucky for if the phone had a locked bootloader, it would've been bricked.
i've been reading a bit about superCID and i don't have a working linux environment (other than virutal) running right now.
but i'll figure out how to check if it's superCID or not (more likely yes).
now that i've figured out one way or the other that the simlock has nothing to do with the firmwares or recovery........... what could cause it?
again i just want it to work and then i'll take the time to play with the custom roms.
I have the correct unlocking code from AT&T since it wouldn't have accepted it to reboot the phone if it was wrong.
so what could be messing it up?
Cheers
srasiroslayer said:
Wunderbar,
i've been reading a bit about superCID and i don't have a working linux environment (other than virutal) running right now.
but i'll figure out how to check if it's superCID or not (more likely yes).
Click to expand...
Click to collapse
You don't need a Linux environment to get fastboot/adb working. And you will need them if you want to get s-off or change the CID (which would be the solutions to your problem of running the RUU).
To get fastboot/adb going, I'd suggest you start here: http://forum.xda-developers.com/showthread.php?t=1754018
There are some apps what will read the phone's state including CID. Others here have mentioned the name of one (or more) such app, but I can't recall, and I don't use it. I'm used to using fastboot.
srasiroslayer said:
now that i've figured out one way or the other that the simlock has nothing to do with the firmwares or recovery........... what could cause it?
again i just want it to work and then i'll take the time to play with the custom roms.
I have the correct unlocking code from AT&T since it wouldn't have accepted it to reboot the phone if it was wrong.
so what could be messing it up?
Click to expand...
Click to collapse
Not sure. Going back to stock might help. Its all I can think of. But don't be disappointed if it still doesn't work.
Alright,
So i figured out my CIDnum is 1111111111 using fastboot.
I understand there's a tool that can revert that.
I should also switch to s-off next.
Then at the end lock the bootloader using the adb commands.
Am i on the right track?
At this point i'll try running the RUU and cross my fingers.
My question is, shouldn't i have the original CID number?
and another off topic point, i have no clue what s-on or s-off are.
i'll get into that reading mode again in a bit.
Thank you again, i feel i'm on the right track now and confident.
Cheers
P.S.: do you need me to post the "fastboot getvar all" results? or only thing missing to be sure of was the CID?
Hang on, you're s-on and SuperCID, don't run the RUU or you'll brick your phone. You need to do some reading and research all this before you try these things.
Sent from my Evita
Guys I am Vivek Rajput, from India. I have AT&T HTC oneX. Anything related to internet is not working except whatsapp. Every app is showing network error msg. Showing some data here which i got after reading here. Assume me complete novice about software/cellphones.
***LOCKED***
EVITA PVT SHIP S-ON RL
HBOOT-1.14.0002
RADIO-0.19as.320911_2
OpenDSP-v29.1.0.45.0622
eMMC-boot
Jun 11 2012,14:36:28
Click to expand...
Click to collapse
Have you checked your APNs?
Sent from my Evita
srasiroslayer said:
Alright,
So i figured out my CIDnum is 1111111111 using fastboot.
I understand there's a tool that can revert that.
I should also switch to s-off next.
Then at the end lock the bootloader using the adb commands.
Am i on the right track?
At this point i'll try running the RUU and cross my fingers.
Click to expand...
Click to collapse
If you are going to s-off, you DO NOT want to change the CID. SuperCID (11111111) is needed to s-off.
As mentioned, make sure you s-off before RUU, or you will brick.
Once you are s-off, it shouldn't matter whether you lock the bootloader or not. S-off means all security checks are bypassed, including the check for bootloader lock.
srasiroslayer said:
and another off topic point, i have no clue what s-on or s-off are.
Click to expand...
Click to collapse
s-off, as mentioned above means all security checks are off. There are good and bad points to this.
The good, is that you will be safe of the SuperCID + RUU brick condition. Custom ROMs will also be easier to flash, if you are interested in doing that (do not need to flash boot.img separately).
The bad of s-off, is that because all security checks are off, there are no safety checks to prevent you from flashing the wrong things. You have to be very careful you don't flash something that is not intended for the device, as it may brick the phone.
Are you are okay with that, then proceed with s-off. If not, the alternate solution is to change the CID back to the proper AT&T CID (cws__001). This will also prevent the SuperCID + RUU brick condition. But may make the phone harder to s-off in the future, if you later choose that route.
It looks like then that the s-off route is the one to take, since i will definitely in the future be interested in flashing custom roms.
And it looks relatively easy as per:
http://forum.xda-developers.com/showthread.php?t=2155071
After doing some reading, it also looks safe to achieve s-off on custom roms such as my case.
I'm still reading if s-off will work on my bootloader version or if there are any specific versions to run it at. (so far no mention so good)
I'm guessing i will run s-off today and if everything works out as it should will post my results here.
Only then will i proceed to run the RUU which i downloaded from htc for the at&t model specifically (no chance i could go wrong with that).
Thank you for all the help, i honestly don't think i would've found my way around easily without guidance.
Cheers
Yes, the s-off method is easy, and it should work on any hboot version.
Good luck.
Could just having S-off fix my sim locked issue?
In any case new questions arise in my head such as since my model number is PJ8310000 and that with s-off i will be installing PJ8312000-OneX.zip, will that affect running the RUU later on?
srasiroslayer said:
Could just having S-off fix my sim locked issue?
Click to expand...
Click to collapse
I doubt it. SIM lock and s-off are not related, to my knowledge.
srasiroslayer said:
In any case new questions arise in my head such as since my model number is PJ8310000 and that with s-off i will be installing PJ8312000-OneX.zip, will that affect running the RUU later on?
Click to expand...
Click to collapse
Once you are s-off, all security and safety checks are off by definition. As long as you are running an RUU meant for EVITA, you will be safe, and it should run properly.
Looks like i got the 99 error thing.
at first i had the error 92 and all was working good but after the final reboot didn't get s-off
the second try i'm getting error 99.
I'm going to read more into it.
I'm still s-on so.......
So here are the current updates.
As i mentioned in the previous post, running it the first time resulted in error 92 which is normal, followed instructions and didn't get s-off.
second time i had error 99. still no s-off.
I turn off the device and power it back on, run the script all over again with a real good attention and precision (i usually don't f*ck things up).
This time i get the error 92 again and still no success at the end. (did this over 4 times now and no s-off).
would i be logical for me to assume that once the rom is booted it's messed up somewhere? hence the last part of the script not working and also hence sim unlock not working?
what's a good custom rom that would i could install using recovery and not brick my phone?
maybe just installing one would solve all my issues.
Cheers
What ROM are you attempting s-off on?
PS. Asking for a suggested/best/favourite ROM isn't allowed here.
Sent from my Evita
timmaaa said:
What ROM are you attempting s-off on?
PS. Asking for a suggested/best/favourite ROM isn't allowed here.
Sent from my Evita
Click to expand...
Click to collapse
Hi,
I'm trying it on CleanROM 4.5 beta2.
And by best rom in my case was asking one that would be compatible with my situation, as in hboot 1.0.9, teamwin 2.1.8.1 recovery, supercid, unlocked, s-on.
Cheers.
Hi Everyone,
knowing it's all out there, just need to read (a lot), please help me finding the correct way to solve my problem. I can not change to other ROM, mostly due to lack of knowledge. Please before you judge and claim I should read and learn, i have kids who don't allow me read things properly, and there are tons of information out there, seems simplier to ask for directions this time, based on the situation of the phone.
This is the first custom rom I tried on my new S4 HTC One S (not brand new, just new to me). It was stock rom, locked. Followed instructions on different threads, I unlocked the phone, flashed TWRP recovery, installed SuperSU, copied Venom Rom zip to SD card and installed from recovery, with the aroma. Success. Before installation I did a backup in TWRP.
I very much like the rom (though have 2 issues: 1. phone reboots randomly without any notification. 2 phone loses carrier randomly, so I see no GSM connection as if SIM was removed. This happens when phone is untouched so no way SIM is loosy or something). When I try to chose carrier manually from settings, it sais no SIM card is installed...
But I would like to try other roms as well, and also wish to compare some stock roms. So I downloaded a generic HTC Europe stock RUU, hoping I can easily flash it. Relocked the phone, ran the RUU.exe with Fastboot USB mode in bootloader, but it all came up with error messages and left me at the HTC logo. All I can do is to re-install Venom 3.0.0 from recovery, that works, otherwise I end up in boot loop.
Also I can not go back to the original state using the backup from TWRP. It installs boots but it basicaly freezes before the phone setup comes. I can see the background image, the clock and the GSM antenna sign, but thats all, nothing else happens, no matter how hard I try to reboot.
Phone current boot screen shows: Tampered + Unlocked
VLE PVT SHIP S-ON RL
HBOOT-2.15.0000
Radio-1.15.50.05.29
OpenDSP-v31.1.0.45.0815
eMMC-boot
Dec 14 2012, 17:10
When I re-locked the phone it said Tampered + Relocked + Security Warning
As recovery I have TWRP 2.6.0.0 flashed. I did nothing else.
Could someone help me with instructions or at least directions how I could go back to a nice stock RUU? With the one I downloaded i had different error codes 213 (wrong ID) and 255 Unkown error.
I believe as the phone is not S-OFF and/or Super CID, it is relevant which RUU I download. The phone used to boot with a voda logo, so I believe it was one of the UK or AT voda stock roms, but neither works.
Your opinion/feedback is highly appreciated.
Cheers,
skee
skee81 said:
Hi Everyone,
knowing it's all out there, just need to read (a lot), please help me finding the correct way to solve my problem. I can not change to other ROM, mostly due to lack of knowledge. Please before you judge and claim I should read and learn, i have kids who don't allow me read things properly, and there are tons of information out there, seems simplier to ask for directions this time, based on the situation of the phone.
This is the first custom rom I tried on my new S4 HTC One S (not brand new, just new to me). It was stock rom, locked. Followed instructions on different threads, I unlocked the phone, flashed TWRP recovery, installed SuperSU, copied Venom Rom zip to SD card and installed from recovery, with the aroma. Success. Before installation I did a backup in TWRP.
I very much like the rom (though have 2 issues: 1. phone reboots randomly without any notification. 2 phone loses carrier randomly, so I see no GSM connection as if SIM was removed. This happens when phone is untouched so no way SIM is loosy or something). When I try to chose carrier manually from settings, it sais no SIM card is installed...
But I would like to try other roms as well, and also wish to compare some stock roms. So I downloaded a generic HTC Europe stock RUU, hoping I can easily flash it. Relocked the phone, ran the RUU.exe with Fastboot USB mode in bootloader, but it all came up with error messages and left me at the HTC logo. All I can do is to re-install Venom 3.0.0 from recovery, that works, otherwise I end up in boot loop.
Also I can not go back to the original state using the backup from TWRP. It installs boots but it basicaly freezes before the phone setup comes. I can see the background image, the clock and the GSM antenna sign, but thats all, nothing else happens, no matter how hard I try to reboot.
Phone current boot screen shows: Tampered + Unlocked
VLE PVT SHIP S-ON RL
HBOOT-2.15.0000
Radio-1.15.50.05.29
OpenDSP-v31.1.0.45.0815
eMMC-boot
Dec 14 2012, 17:10
When I re-locked the phone it said Tampered + Relocked + Security Warning
As recovery I have TWRP 2.6.0.0 flashed. I did nothing else.
Could someone help me with instructions or at least directions how I could go back to a nice stock RUU? With the one I downloaded i had different error codes 213 (wrong ID) and 255 Unkown error.
I believe as the phone is not S-OFF and/or Super CID, it is relevant which RUU I download. The phone used to boot with a voda logo, so I believe it was one of the UK or AT voda stock roms, but neither works.
Your opinion/feedback is highly appreciated.
Cheers,
skee
Click to expand...
Click to collapse
To go back to stock u have to flash the right RUU, depends on which CID ur phone got.
u can download it here: http://www.androidruu.com/?developer=Ville
If u downloaded the right RUU, boot ur HOS into fastboot relock the phone and start the RUU.
Let it finish and u r on stock
Hi Homeboy, thanks for the answer. Seems clear. I have only 1 question. How can I make sure which is the right RUU?
I believe I should do a getvar all command, to see the CID id? Then what shall I look at the RUU's filename?
And after the phone having been relocked, shall it be in fatboot USB in bootloader or shall the phone be up and running when I start the RUU.exe from the computer?
thanks
skee81 said:
Hi Homeboy, thanks for the answer. Seems clear. I have only 1 question. How can I make sure which is the right RUU?
I believe I should do a getvar all command, to see the CID id? Then what shall I look at the RUU's filename?
And after the phone having been relocked, shall it be in fatboot USB in bootloader or shall the phone be up and running when I start the RUU.exe from the computer?
thanks
Click to expand...
Click to collapse
hi,
i saw u live in Hungary so it should be the Europe RUU try this:
http://www.androidruu.com/getdownload.php?file=Ville/RUU_Ville_U_ICS_40_S_HTC_Europe_2.31.401.5_Radio_1.06es.50.02.31_10.09a.50.04L_release_275655_signed.exe
And yes phone should be in fastboot when u start the RUU.