So I was trying to updated to a new rom.
to do so i needed to install tarp 2.7
I flash the recovery with fast boot
when it started back up, my internal storage is now at 0 and basically it seems that my sd card is empty...
Any ideas?
bnd10706 said:
So I was trying to updated to a new rom.
to do so i needed to install tarp 2.7
I flash the recovery with fast boot
when it started back up, my internal storage is now at 0 and basically it seems that my sd card is empty...
Any ideas?
Click to expand...
Click to collapse
Run a RUU, return to stock. I'm allmost sure that it is't bricked, or you can try to flash 2.6.3.0 twrp
Insecret said:
Run a RUU, return to stock. I'm allmost sure that it is't bricked, or you can try to flash 2.6.3.0 twrp
Click to expand...
Click to collapse
Ill try to flash 2.6.3.0 to see, i still have fast boot commands.
how do I run an RUU? sorry its been awhile for me.
Insecret said:
Run a RUU, return to stock. I'm allmost sure that it is't bricked, or you can try to flash 2.6.3.0 twrp
Click to expand...
Click to collapse
installing 2.6.3.0 yeilded no results
bnd10706 said:
installing 2.6.3.0 yeilded no results
Click to expand...
Click to collapse
You need to flash the stock recovery and perform "factory reset + clear storage" fo fix the sd card bug. Once done you can install a custom recovery and flash a custom rom OR ru RUU to get your phone back to full stock
LS.xD said:
You need to flash the stock recovery and perform "factory reset + clear storage" fo fix the sd card bug. Once done you can install a custom recovery and flash a custom rom OR ru RUU to get your phone back to full stock
Click to expand...
Click to collapse
Thank you, installed RUU and it worked fine. Thanks!
Related
Im having a problem when i try to format via Cwm i keep getting E:format_volume: rfs format failed on /dev/block/mmcblk0p2,also when i try to flash a rom it will get stuck on a bootloop...I can restore back to ARHD 3.6.1 and it will boot up and work fine but when i try to flash a new rom i always get the error message and get stuck can someone please help me...
RUU back to stock and start again
Anyone else with this problem?? Im on ARHD 3.6.1
EddyOS said:
RUU back to stock and start again
Click to expand...
Click to collapse
if i RUU back to stock do i have to Re-root and super CID all over? And how do i go back to stock RUU im on a T-mobile usa sensation 4g..sorry im a newbie and thanks for the help
HigherSensation said:
if i RUU back to stock do i have to Re-root and super CID all over? And how do i go back to stock RUU im on a T-mobile usa sensation 4g..sorry im a newbie and thanks for the help
Click to expand...
Click to collapse
If you have done super CID already, then all you would need to do is run the RUU of your choice (WWE would do nicely), then re-flash the recovery, and then flash any ROM you want.
pakraider said:
If you have done super CID already, then all you would need to do is run the RUU of your choice (WWE would do nicely), then re-flash the recovery, and then flash any ROM you want.
Click to expand...
Click to collapse
if i ruu back i will still have s-off correct? and all ill need to do is flash recovery and SU
Thanks for the help guys I Ruu back to stock and im still having the same problem any ideas?
fixed**
3. Open Rom Manager
4. Choose to Partition your sdcard, sdext 512, swap 0
5. Reinstall Recovery through Rom Manager
6. Reboot into Recovery
7. Wipe
HigherSensation said:
fixed**
3. Open Rom Manager
4. Choose to Partition your sdcard, sdext 512, swap 0
5. Reinstall Recovery through Rom Manager
6. Reboot into Recovery
7. Wipe
Click to expand...
Click to collapse
Hello, I am a noob. This looks useful. Could you perhaps explain it a little further..??
oh man ... whho can help me on this.. im really newbie on androi phone.
HigherSensation said:
fixed**
3. Open Rom Manager
4. Choose to Partition your sdcard, sdext 512, swap 0
5. Reinstall Recovery through Rom Manager
6. Reboot into Recovery
7. Wipe
Click to expand...
Click to collapse
What if I do not have Rom Manager installed and teh market is not working anymore?
my htc one s is stock at twrp
I was using a custom rom and I factory reset from twrp. Now It does not see internal SD card.
I want to install rom and fix this thing. By the way TWRP looks cool but is there a way to downgrade to different one .
I cant even push files
ilkercatal said:
my htc one s is stock at twrp
I was using a custom rom and I factory reset from twrp. Now It does not see internal SD card.
I want to install rom and fix this thing. By the way TWRP looks cool but is there a way to downgrade to different one .
I cant even push files
Click to expand...
Click to collapse
You will need to flash the stock recovery and then factory reset in bootloader but you will lose everything on the sd card then TWRP should work again and the best version of it is 2.2.2.0.
Darknites said:
You will need to flash the stock recovery and then factory reset in bootloader but you will lose everything on the sd card then TWRP should work again and the best version of it is 2.2.2.0.
Click to expand...
Click to collapse
thanks for suggestion but how,link anyhelp?"
hi, i just tried to flash Pacman 4.4 Rom from here http://forum.xda-developers.com/showthread.php?t=2670076 but it stopped at the animated "PACROMS loading" Screen (after flashing Rom, Gapps and rebooting).
I had Vipers 5.1 installed before. Restoring my nandroid backup it rebooted after Vipers loading Screen and stopped at the white HTC screen. :crying:
Installed new Vipers now and that worked but all my Settings are gone.
Should i try to restore my backup now again? and what could have been the Problem with the pacman Rom?
my Sensation xe is rooted, s-off, supercid and i used 4ext recovery
thanks in advance and sorry for mistakes. English is not my native language
I don't know if it helps in any way, but since cwm is kinda old (as far as I know) I'd say install latest 4ext recovery and try again.
Did you wipe everything before flashing pac?
Sajito said:
I don't know if it helps in any way, but since cwm is kinda old (as far as I know) I'd say install latest 4ext recovery and try again.
Did you wipe everything before flashing pac?
Click to expand...
Click to collapse
oh my bad im new into all this
i have 4ext recovery already (not cwm) and yes i wiped everything
snierecht said:
oh my bad im new into all this
i have 4ext recovery already (not cwm) and yes i wiped everything
Click to expand...
Click to collapse
What hboot and firmware are you using? And is your 4ext latest one? (v. 1.0.0.6 RC1)
snierecht said:
hi, i just tried to flash Pacman 4.4 Rom from here http://forum.xda-developers.com/showthread.php?t=2670076 but it stopped at the animated "PACROMS loading" Screen (after flashing Rom, Gapps and rebooting).
I had Vipers 5.1 installed before. Restoring my nandroid backup it rebooted after Vipers loading Screen and stopped at the white HTC screen. :crying:
Installed new Vipers now and that worked but all my Settings are gone.
Should i try to restore my backup now again? and what could have been the Problem with the pacman Rom?
my Sensation xe is rooted, s-off, supercid and i used 4ext recovery
thanks in advance and sorry for mistakes. English is not my native language
Click to expand...
Click to collapse
Hi,
try to restore backup, then don't erase nothing with a new install of Vipers5.1.0 but dont wipe anything, it maybe fix your bootloop
Sajito said:
What hboot and firmware are you using? And is your 4ext latest one? (v. 1.0.0.6 RC1)
Click to expand...
Click to collapse
thanks, i had an older 4ext Version (something like 5.xxxx without touch), i updated it now
i guess that will also fix my restore Problem ?
hboot 1.27.1100
Firmware was 3.33 as far as i remember but cant find it at the moment, where can i look it up?
snierecht said:
thanks, i had an older 4ext Version (something like 5.xxxx without touch), i updated it now
i guess that will also fix my restore Problem ?
hboot 1.27.1100
Firmware was 3.33 as far as i remember but cant find it at the moment, where can i look it up?
Click to expand...
Click to collapse
It might help, not sure if it really does. Try out and tell us.
Sajito said:
It might help, not sure if it really does. Try out and tell us.
Click to expand...
Click to collapse
got most things set up again now, had some titanium backups^^
dont want to ruin it again
found this in another thread
keithross39 said:
Jellybean firmwares use a partition called preload.....I'd say with certainty that cwm didn’t backup this partition.....you have to enable the option before you make the nandroid.....
Without the preload backup, any firmware restore will bootloop.....
Sent from my rooted, de bloated, stock JB powered S2 via PhilZ kernel and XDA developers app
Click to expand...
Click to collapse
could this be the reason for not restoring my backup?
snierecht said:
got most things set up again now, had some titanium backups^^
dont want to ruin it again
found this in another thread
could this be the reason for not restoring my backup?
Click to expand...
Click to collapse
Maybe, I don't know since I never faced such an issue.
Sajito said:
Maybe, I don't know since I never faced such an issue.
Click to expand...
Click to collapse
ok thanks for your help and time anyway
snierecht said:
ok thanks for your help and time anyway
Click to expand...
Click to collapse
Have you Tried latest PacMan build???
Its the pac_pyramid-nightly-20140423.zip the latest.
you can get it PacMan Thread
snierecht said:
hi, i just tried to flash Pacman 4.4 Rom from here http://forum.xda-developers.com/showthread.php?t=2670076 but it stopped at the animated "PACROMS loading" Screen (after flashing Rom, Gapps and rebooting).
I had Vipers 5.1 installed before. Restoring my nandroid backup it rebooted after Vipers loading Screen and stopped at the white HTC screen. :crying:
Installed new Vipers now and that worked but all my Settings are gone.
Should i try to restore my backup now again? and what could have been the Problem with the pacman Rom?
my Sensation xe is rooted, s-off, supercid and i used 4ext recovery
thanks in advance and sorry for mistakes. English is not my native language
Click to expand...
Click to collapse
It is so simple if you using 4EX.
Go to recovery>Go to tolls> at the end of page enable Smartfalsh.
Go to wipe> format data/catch and format system with out SD Card. now everything is ok.
Install new ROM and enjoy it
marco1962 said:
It is so simple if you using 4EX.
Go to recovery>Go to tolls> at the end of page enable Smartfalsh.
Go to wipe> format data/catch and format system with out SD Card. now everything is ok.
Install new ROM and enjoy it
Click to expand...
Click to collapse
Im S-Off so i don't need smartflash i think
Updating recovery and firmware solved my problems
snierecht said:
Im S-Off so i don't need smartflash i think
Updating recovery and firmware solved my problems
Click to expand...
Click to collapse
Yeaaaaaaah very nice
Hi,
My mom has an Asus TF300T running JB 4.2.1. She tried to root and flash OmniROM by herself and borked it somehow. Unfortunately, she didn't do any backup...
She entered the fastboot screen and there she selected wipe. Then she flashed openrecovery-twrp-2.6.3.0-tf300tg-JB.blob using fastboot.
Now I am trying to help her rescue it.
It's operational, the OS loads up fine and she can use it, install apps etc.
I can get to the fastboot screen and from there to the TWRP no problem, but TWRP can't mount anything besides system.
No dalvik partition, no data partition, not even the SD or external SD.
Naturally, I can't flash another rom...
Tried executing "fix permissions" from the TWRP menu, it didn't help.
Downloaded the latest official Asus blob file TF300T-US_epad-10_6_1_27_5-UpdateLauncher.zip and flashed it using fastboot, hoping it will restore the missing partitions but it didn't make any difference.
Also tried CWM - same issue.
Any ideas?
Thanks,
Sefi
chompy18 said:
Hi,
My mom has an Asus TF300T running JB 4.2.1. She tried to root and flash OmniROM by herself and borked it somehow. Unfortunately, she didn't do any backup...
She entered the fastboot screen and there she selected wipe. Then she flashed openrecovery-twrp-2.6.3.0-tf300tg-JB.blob using fastboot.
Now I am trying to help her rescue it.
It's operational, the OS loads up fine and she can use it, install apps etc.
I can get to the fastboot screen and from there to the TWRP no problem, but TWRP can't mount anything besides system.
No dalvik partition, no data partition, not even the SD or external SD.
Naturally, I can't flash another rom...
Tried executing "fix permissions" from the TWRP menu, it didn't help.
Downloaded the latest official Asus blob file TF300T-US_epad-10_6_1_27_5-UpdateLauncher.zip and flashed it using fastboot, hoping it will restore the missing partitions but it didn't make any difference.
Also tried CWM - same issue.
Any ideas?
Thanks,
Sefi
Click to expand...
Click to collapse
You are flashing the wrong TWRP. Flash: openrecovery-twrp-2.6.3.0-tf300tg-42.blob
Also If you are installing the KitKat OmniROM, you need TWRP 2.7+
cmendonc2 said:
You are flashing the wrong TWRP. Flash: openrecovery-twrp-2.6.3.0-tf300tg-42.blob
Also If you are installing the KitKat OmniROM, you need TWRP 2.7+
Click to expand...
Click to collapse
Wow! I missed that completely!!
That actually sounds promising.
Yeah, I want to flash KitKat OmniROM, so does the TWRP2.7+ also have a 42 version like the 2.6.30 or just flash TWRP 2.7+ ?
Thanks for your reply!
Sefi
chompy18 said:
Wow! I missed that completely!!
That actually sounds promising.
Yeah, I want to flash KitKat OmniROM, so does the TWRP2.7+ also have a 42 version like the 2.6.30 or just flash TWRP 2.7+ ?
Thanks for your reply!
Sefi
Click to expand...
Click to collapse
Actually, looking in the TWRP site here: http://techerrata.com/browse/twrp2/tf300t, there is no 2.7 version..
So, I'm just making sure, I should flash openrecovery-twrp-2.6.3.0-tf300t-4.2.blob and that should allow TWRP to mount the partitions, right?
What if I want to flash OmniROM KitKat (4.4)? Should I just flash 2.7 over openrecovery-twrp-2.6.3.0-tf300t-4.2.blob?
Thanks,
Sefi
chompy18 said:
Actually, looking in the TWRP site here: http://techerrata.com/browse/twrp2/tf300t, there is no 2.7 version..
So, I'm just making sure, I should flash openrecovery-twrp-2.6.3.0-tf300t-4.2.blob and that should allow TWRP to mount the partitions, right?
What if I want to flash OmniROM KitKat (4.4)? Should I just flash 2.7 over openrecovery-twrp-2.6.3.0-tf300t-4.2.blob?
Thanks,
Sefi
Click to expand...
Click to collapse
This guide has all the links, just flash omnirom instead of cm. There's only a 42 version, so make sure your bootloader is stock V10.6.1.27.1 or V10.6.1.27.5 or V10.6.1.15.3 . upgrade your bootloader if you are on V10.6.1.8.
http://forum.xda-developers.com/showpost.php?p=48508679&postcount=7
cmendonc2 said:
This guide has all the links, just flash omnirom instead of cm. There's only a 42 version, so make sure your bootloader is stock V10.6.1.27.1 or V10.6.1.27.5 or V10.6.1.15.3 . upgrade your bootloader if you are on V10.6.1.8.
http://forum.xda-developers.com/showpost.php?p=48508679&postcount=7
Click to expand...
Click to collapse
Thanks man! it worked!!!
I had to flash openrecovery-twrp-2.6.3.0-tf300t-4.2 and after it, upgrade to TWRP-TF300T-2_7_0_1 for complete SELinux support, only then could I flash omni-4.4.2-20140416-tf300t-NIGHTLY.
You rock!
Sefi
thus I don't have OS anymore, so I can't boot into download mode.
I have TWRP, I think the only thing I can do is just get stock .zip ROM. But I can't find it for my G930F, I downloaded some but they are all prepared for odin, not for recovery.
Could please anyone give me a download link for a flashable stock rom?
Or any other ideas?
Thanks
You had TWRP but didn't make a backup?
Technically it doesn't have to be a stock ROM, you could just flash a custom ROM and once you've got system back then you can flash back to stock with Odin.
Beanvee7 said:
You had TWRP but didn't make a backup?
Technically it doesn't have to be a stock ROM, you could just flash a custom ROM and once you've got system back then you can flash back to stock with Odin.
Click to expand...
Click to collapse
So I do have LinkeageOS 16 installed now, but every restart, I can't mount /data in TWRP, I have to wipe it over and over. Why is that?
Another thing is that phone doesnt detect my SIM card (on stock recovery it did detect).
iirc that's something to do with encryption, but I've never experienced it so can't be sure.
Can you tried a stock Odin flash since installing Lineage?
Are you using the most recent TWRP?
Droiderat said:
Are you using the most recent TWRP?
Click to expand...
Click to collapse
I flashed newest stock ROM and updated twrp and everything seems to be working now
Weird, I didn't have to reflash LOS.
But yeah, I will write here if the problem still persists later.