A friend gave me an XE with broken digitizer so a gave it a shot. Unfortunately I wasn't very smooth removing it accidentaly cut the cable i point to on the snapshot. My problem (?) now is that everything seems to be working as it should and I don't know whether I should spend more money replacing the broken thing, because I dont even know what is not working. Apparently, I cut the microphone cable, but microphone is working perfectly, so what is wrong?
Left softkeys led light doesn't work
panki_86 said:
Left softkeys led light doesn't work
Click to expand...
Click to collapse
thank you panki, I didn't notice that, so it's going to stay that way.
Related
Hey,
I accidently dropped my phone in water a couple of days ago. The backlight doesnt work. Under a really bright light i can see the lock screen and it still functions. Is it possible to replace just the backlight? or what should i do? I dont believe this would be covered from motorola and I live in canada got the phone shipped from the states.
Any advice would be appreciated.
Thanks,
James
I'm guessing you might need a new screen/display. Perhaps do a search and find a repair place you can ship it and get an estimate? I know HTC offers such repairs dirctly (ship the phone, they call you with an estimate). I'd bet Moto does as well if you're not comfortable with 3rd party repair.
aznproto said:
Hey,
I accidently dropped my phone in water a couple of days ago. The backlight doesnt work. Under a really bright light i can see the lock screen and it still functions. Is it possible to replace just the backlight? or what should i do? I dont believe this would be covered from motorola and I live in canada got the phone shipped from the states.
Any advice would be appreciated.
Thanks,
James
Click to expand...
Click to collapse
I have the same problem right now except mine was not dropped in water. In a bright light I can see the lockscreen and also could see the emergency dialer tonight but the keyboard was not reacting on certain buttons either. One screen said to unlock enter your gmail account info,I tried to enter my name and the period symbol(.) was not working for me. I'm thinking maybe the LCD screen needs replaced or the ribbon cable,IDK. Any help is GREATLY appreciated.
Edit: Essentially I finally got logged into the phone and the keys were working fine,the screen was still dim so I turned the brightness all the way up and turned off automatic backlight. I replaced the LCD screen and digitizer and now the phone is not starting for me. I'm about to replace the Flex Ribbon Cable inside the phone and see if this corrects the problem. Right now i cant get the phone to start up so I'm thinking the ribbon cable is disconnected somewhere because it hooks to the motherboard and the LCD or the motherboard is fried. IDK,I'll let everybody know what happens with this project.
lcd not working
PS3AndroidHacker said:
I have the same problem right now except mine was not dropped in water. In a bright light I can see the lockscreen and also could see the emergency dialer tonight but the keyboard was not reacting on certain buttons either. One screen said to unlock enter your gmail account info,I tried to enter my name and the period symbol(.) was not working for me. I'm thinking maybe the LCD screen needs replaced or the ribbon cable,IDK. Any help is GREATLY appreciated.
Edit: Essentially I finally got logged into the phone and the keys were working fine,the screen was still dim so I turned the brightness all the way up and turned off automatic backlight. I replaced the LCD screen and digitizer and now the phone is not starting for me. I'm about to replace the Flex Ribbon Cable inside the phone and see if this corrects the problem. Right now i cant get the phone to start up so I'm thinking the ribbon cable is disconnected somewhere because it hooks to the motherboard and the LCD or the motherboard is fried. IDK,I'll let everybody know what happens with this project.
Click to expand...
Click to collapse
What happen to letting everyone know? Were you ever able to get it going? Was it the flex cable? How did you get the LCD working.
Replaced the flex ribbon cable and it still didnt help anything. Guess its just the phone. I trashed the phone a while ago anyways and am currently running a rooted Droid 4
Sent from my DROID4 using xda premium
Hi,
My phone has a problem, i hope someone can help me, it started about a month ago,
When i slide the keyboard the screen would freeze, the image would freeze or sometimes it would become like this:
http://www.esato.com/board/img.php?id=140762 ( this is not my phone its just a pic i found)
This problem would be solved it i gently slide the keyboard back in, the screen would be back to normal, sometimes i had to slide it out and it
alot of time to make it work.
Well, today i woke up, with the screen of my phone all messed up ( like in the picture), i slide it out and in alot of times but no luck.
I turned my phone off, when i turned it on, the screen doesnt lighted up or showed something, the phone just vibrates, i took off the battery and tried again but no luck.
I read somewhere that i could be the flex cable, so i ordered one, but its gonna take some time to arrive.
Anyone had this problem before that can help me?
I didn't encounter such problems on MT4GS yet. But being a slider phone enthusiast I could 100% say it's a flex cable thing since I encountered that problem more than a dozen times already on other phones(nokia).
Riyal said:
I didn't encounter such problems on MT4GS yet. But being a slider phone enthusiast I could 100% say it's a flex cable thing since I encountered that problem more than a dozen times already on other phones(nokia).
Click to expand...
Click to collapse
Thanks for the info , when my new flex cable arrive i'll let everybody know what was the problem.
ShadyGame said:
Thanks for the info , when my new flex cable arrive i'll let everybody know what was the problem.
Click to expand...
Click to collapse
I would strongly recommend that you get a cable with the speaker already soldered in place....
+1 to that, get as much pre assembled as possible, this is about the most pain in the butt phone I've ever had the pleasure to disassemble. Read the last few posts here!
http://forum.xda-developers.com/showthread.php?p=35109055
Sent from my HTC Vision using xda premium
GoPadge said:
I would strongly recommend that you get a cable with the speaker already soldered in place....
Click to expand...
Click to collapse
is this one okay?
http://www.ebay.com/itm/121037327256?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
ShadyGame said:
is this one okay?
http://www.ebay.com/itm/121037327256?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Click to expand...
Click to collapse
Yup. That one has the speaker, it's the black bar at the top with the silver sticker.
GoPadge said:
Yup. That one has the speaker, it's the black bar at the top with the silver sticker.
Click to expand...
Click to collapse
Nice, that the one i ordered, thanks for your help, ill report later how everything went when i receive the flex cable
I know this thread is from quite a while ago, but how did everything go? I'm having a similar issue.
GoPadge said:
I would strongly recommend that you get a cable with the speaker already soldered in place....
Click to expand...
Click to collapse
thanks for this bit of advice.
Disassembling the front of the phone is a pain. I'm a fan of spending $40 on ebay on a broken phone (where the screen still works just fine) and swapping out the fronts. That will get you a new flex cable as well. Otherwise, you risk having to get a new flex cable *and* a new LCD.
Agreed. First time disassembling front I was scared not to OVERheat phone internals. I ripped in half trackpad ribbon, damaged lcd back cover and got a lot of problems from it.
Then I bought broken phone with good front, but dead LCD. Second time I just lost it, I heated phone so hard that I got burns on my fingers, but it was worth it, LCD glue came off soo nice.
So better to overheat, then underheat when disassembling front LCD.
I just recently replaced my screen/lcd/digitizer on my phone and my microphone no longer works. The microphone flex cable seems to be in good condition as the vibration still works. I'm stumped. I hate to go back to my buddies old phone.
outcold32 said:
I just recently replaced my screen/lcd/digitizer on my phone and my microphone no longer works. The microphone flex cable seems to be in good condition as the vibration still works. I'm stumped. I hate to go back to my buddies old phone.
Click to expand...
Click to collapse
If you're s-off you can RUU to rule out software but it's nearly impossible to tell online what would be causing it software wise. Even if the flex cable looks fine, it can still be damaged. Also, the cable could come loose while putting it back together. These are things we cannot tell from miles away though.
exad said:
If you're s-off you can RUU to rule out software but it's nearly impossible to tell online what would be causing it software wise. Even if the flex cable looks fine, it can still be damaged. Also, the cable could come loose while putting it back together. These are things we cannot tell from miles away though.
Click to expand...
Click to collapse
Unfortunately, my phone is s-on. If it is the flex cable, then shouldn't my soft buttons not light up as they are the same flex cable?
outcold32 said:
Unfortunately, my phone is s-on. If it is the flex cable, then shouldn't my soft buttons not light up as they are the same flex cable?
Click to expand...
Click to collapse
That is not necessarily the case. I would S-OFF and RUU though if you want to rule out software.
I have the same problem as the OP. No mic after screen replacement. Unfortunately, I replaced the screen, went S-OFF and to RUU 3.18 all in one fell swoop so I'm not certain if it's a hardware or software problem.
Update: After replacing the Nav Light/Microphone flex, works fine. (AT&T version)
Got from PhonePartsUSA, part number FLX-HTC-276
Hello. I got this Z3 with a broken screen, when I got it it had only black backlight, no image, but the LCD cable on the bottom was cut, so I thought that was why it had no image.
So I replaced the screen with a new one, but the issue remains, no image, only black backlight.
Tried restoring the software with Sony PC companion, updated to latest version, but it didn't help.
The phone boots fine, touch works, I can select options and sometimes I even get audio readouts of what is on the screen, just no image.
Is this a dead motherboard or something else? Because I went through a couple of new screens, none worked, so I'm out of the ideas.
I haven't encountered a case like this before, the screen either works or doesn't, the fact that the touch works and I have backlight puzzles me. No backlight or no touch issues are a common case to me, but this is a new one.
Can someone help here?
Thnx
Same problem....
Hi all.I have the same problem and tried few screens with no luck.If I get z3 compact on hd tv via hdmi cable I can see that it works but no image on lcd only backlight and touch works.Did you find out what causes this problem?
egres said:
Hi all.I have the same problem and tried few screens with no luck.If I get z3 compact on hd tv via hdmi cable I can see that it works but no image on lcd only backlight and touch works.Did you find out what causes this problem?
Click to expand...
Click to collapse
It's a faulty LCD connector on the motherboard, in my case. Not the connector itself but the small jumper just above it, it gives power to the LCD, it was broken off.
I had it resoldered. Works fine now.
Could ju point me a bit closer whitch one it was?Did you get no image at all or something like the one on my picture?https://drive.google.com/open?id=0Bym65RPW_fIpeXlkX2NTYUw5SVk This is how mine looks like around the lcd connector.https://drive.google.com/open?id=0Bym65RPW_fIpTXZpWTFKby1Ua3c
egres said:
Could ju point me a bit closer whitch one it was?Did you get no image at all or something like the one on my picture?https://drive.google.com/open?id=0Bym65RPW_fIpeXlkX2NTYUw5SVk This is how mine looks like around the lcd connector.https://drive.google.com/open?id=0Bym65RPW_fIpTXZpWTFKby1Ua3c
Click to expand...
Click to collapse
No image at all, only black backlight ant the touch was responding.
The three square fuses on the bootom of the picture, it's similar in Z3, in my phone one of those was broken off.
Hi guys. I have almost the same problem but inverted. My display and touch is working but i dont have backlight. I can see the screen only if i put light on it.
Maybe u guys have a faulty digitizer responsible for image faulty(no image), better for send repair, flashing new stock firmware will not help
I tried with new digitizer, no luck. Tried jumping the fuse with no luck. Don't know what to try anymore.
GreatVortex said:
I tried with new digitizer, no luck. Tried jumping the fuse with no luck. Don't know what to try anymore.
Click to expand...
Click to collapse
egres said:
Could ju point me a bit closer whitch one it was?Did you get no image at all or something like the one on my picture?https://drive.google.com/open?id=0Bym65RPW_fIpeXlkX2NTYUw5SVk This is how mine looks like around the lcd connector.https://drive.google.com/open?id=0Bym65RPW_fIpTXZpWTFKby1Ua3c
Click to expand...
Click to collapse
Put the motherboard in the oven and bake it for a few minutes, it resold everything, if that's the problem, it will fix it.
For more infos and temperature / time, google it
Same problem here! i have tried new lcd, new flex cable. nathing works, lcd backlight turn on but no image, touch work cause i feel vibration while touching the lcd.
Pleas Helpppp Anyone with the genius mind??????
I'm facing the same problem with my Z3C, a friend of mine told me he applied this method on his phone and it worked but i'm not sure how to do it.
http://www.mobilerdx.com/2015/03/sony-xperia-z3-display-lighting-problem-repair-solution.html
z3 no display but backlight on
by jumperig the fuse near lcd conector it turns on the backlight .There is another fuse surrounding power manager ic which may got open & display ic is not powering.
Today after lunch, my Nexus 5 started rebooting continuously, After 4 to 6 hours it started working as normal, but the touch of my phone is not working since it started again. Before the mentioned problem, it was working fine.
Please help me in following issue, Should I replace my LCD & Digitizer or this is any other issue???
The constant rebooting could be a power button issue.
Have you tried a factory reset in fastboot mode?
Try sticking piece of transparent tape on the bottom of flex cable (i sticked it on top of lcd and digitizer board. It works now for me. Before i couldt get touch to work
aciupapa said:
Try sticking piece of transparent tape on the bottom of flex cable (i sticked it on top of lcd and digitizer board. It works now for me. Before i couldt get touch to work
Click to expand...
Click to collapse
can you show on a picture how to do that and where precisely? thanks in advance.
babywarez said:
can you show on a picture how to do that and where precisely? thanks in advance.
Click to expand...
Click to collapse
actually i have no lcd or frame on my phone, as i am waiting for a replacement,because it fell on ground and lcd broke but here's what i did to make it work:
just put some transparent tape over the red area, try to cover everything, except screw stocks , and only then place the flex cable.
this worked perfectly before i broke my phone. in 3 day's i'll get a replacement lcd, so i'll be able to make some photos of how it's supposed to be.
If it won't work be really careful while removing the tape, so you wont wrip the lcd conenctor.
picture is in attachements