Database Info

[Q] Serious problem

Hi,
please help me! I hope it is not a brick.
I wanted to make full wipe. I made factory reset in recovery and then wiped sdcard.. Now I cannot boot ROM because there is no one and I have nothing on my SD. So I even cannot copy rom or backup back to phone.
Is there any way out? (
EDIT: I think I can push files (e.g. backup) through adb, right? I installed adb for dummies but when I want to execute SDKmanager.exe. it only opens black window and immediately closes it. I cannot continue

devcager said:
Hi,
please help me! I hope it is not a brick.
I wanted to make full wipe. I made factory reset in recovery and then wiped sdcard.. Now I cannot boot ROM because there is no one and I have nothing on my SD. So I even cannot copy rom or backup back to phone.
Is there any way out? (
EDIT: I think I can push files (e.g. backup) through adb, right? I installed adb for dummies but when I want to execute SDKmanager.exe. it only opens black window and immediately closes it. I cannot continue
Click to expand...
Click to collapse
Access your commands through a terminal window, like start > run > cmd to get into the prompt.
and from there work your way to your directory where you have placed it, and execute the command from that directory directly.

..

Thanks!
In the end I used adb to push backup in recovery...
All this I did because I wanted wipe my device - today I woke up and got a call and found out that my earphone stopped working I am afraid that it is due to condensation and next oxidation... I did not do anything wrong but when you come from cold winter weather into a warm flat it can happen Now I need to send it and hope the warranty will pass..
Anyway, I was looking for complete unroot process and found several advices. I am not clever from them. Is it enough to flash stock ROM? Recovery will be removed as well??

..

Election Day said:
Flash a stock ROM (this will also flash the stock recovery) and relock the bootloader with fastboot oem lock afterwards.
Click to expand...
Click to collapse
Ok. I have everything done but the relocking. Could you tell me how shall I do this? I tried to write "adb reboot bootloader" and then " fastboot oem lock" but both case the command line responded something like that it is not internal command etc. (I dont have it in English) Cannot lock it

devcager said:
Ok. I have everything done but the relocking. Could you tell me how shall I do this? I tried to write "adb reboot bootloader" and then " fastboot oem lock" but both case the command line responded something like that it is not internal command etc. (I dont have it in English) Cannot lock it
Click to expand...
Click to collapse
1.Switch off your phone
2.Connect your phone to your PC throught the USB cable
3.Switch on phone into fastboot
4.Provided that you have the driver for windows for the phone installed open Start/run/cmd (from your PC)
5.From the Android-SDK/platform-tools run the following "fastboot oem lock".
like :
C:\Android-sdk\platform-tools\fastboot oem lock
this will lock it immediately ...

mahanddeem said:
1.Switch off your phone
2.Connect your phone to your PC throught the USB cable
3.Switch on phone into fastboot
4.Provided that you have the driver for windows for the phone installed open Start/run/cmd (from your PC)
5.From the Android-SDK/platform-tools run the following "fastboot oem lock".
like :
C:\Android-sdk\platform-tools\fastboot oem lock
this will lock it immediately ...
Click to expand...
Click to collapse
it works only in "tools" and then it just says "waiting for device" and stucks When I tried "fastboot devices" it says nothing... I tried to reinstall drivers but maybe I have some old version? When I am in Windows copying files etc. it works well.

1. Make sure you open the command prompt IN in the folder with fastboot.exe.
2. Put the phone in fastboot mode.
3. In the command prompt type fastboot devices.
It will now show your serial number. If not its either you are such a noob that you managed to screw that up or the fastboot drivers are not installed. Or both.

albundy2010 said:
1. Make sure you open the command prompt IN in the folder with fastboot.exe.
2. Put the phone in fastboot mode.
3. In the command prompt type fastboot devices.
It will now show your serial number. If not its either you are such a noob that you managed to screw that up or the fastboot drivers are not installed. Or both.
Click to expand...
Click to collapse
OK. I really dont understand what could have been screwed up. Ok. It doesnt show anything. Just nothing. Cen you please send me the link for the drivers which should work? Maybe there is the problem. Fastboot drivers are something else than drivers for adb to be working? Because I dont know whats wrong. Thanks...

devcager said:
OK. I really dont understand what could have been screwed up. Ok. It doesnt show anything. Just nothing. Cen you please send me the link for the drivers which should work? Maybe there is the problem. Because I dont know whats wrong. Thanks...
Click to expand...
Click to collapse
If you have i9023 you need to add a line into the sdk for driver. You can search the tutorial threads for it.
Sent from my Nexus S using Tapatalk

try this
just check if you have fastboot and adb on the same folder, when I've rooted mine's got this issue, if cmd report "the command is an external one" simply means there is no such program in the folder you are in
copy both adb and fastboot in tools and platform-tools too, so you can run the command in both folder
cd>desktop > cd android>cd android-sdk> cd tools (then run adb or fastboot)
cd>desktop > cd android>cd android_sdk> cd platform-tools (thr run adb or fastboot)

1. Find out exactly what phone model you have if you don't know already.
2. Do the same for your computers os . Including 32 or 64 bit.
3. Combine that info and search the forum or just Google search. How to install fastboot drivers for phone model in step 1 with the os in step 2.

..

Thank you all. I decided to unroot it and relock it using Odin software which was great and quick. So I am done.... Adb has a lot of problems with drivers, commands, paths. This way was much easier

adb has no issues. User error.

albundy2010 said:
adb has no issues. User error.
Click to expand...
Click to collapse
+1
Sent from my GT-I9100 using XDA App

albundy2010 said:
adb has no issues. User error.
Click to expand...
Click to collapse
Maybe you are right. Maybe it was driver problem which I solved and then immediately used odin. Anyway, it is user friendly and I am finally done with what I wanted

albundy2010 said:
adb has no issues. User error.
Click to expand...
Click to collapse
Agreed, but not the user friendliest.
For the OP: Good luck having it repaired!

Gunnyman's quick and dirty adb/fastboot primer

I see there are a lot of users here in these forums that either are scared of ADB or have no idea how to use it or what to do with it.
The beauty of ADB is it's cross platform, it works on Windows, Mac, and Linux.
The adb commands everyone should know how to use are very basic and used for file manipulation and device control.
To use ADB Google will tell you you need to download and install the most current Android SDK. If you want to write apps for Android, this is true, but for most people there's no need to do this.
You can get everything you need from one of the one clicks.
You need adb and fastboot for your platform.
Download them and put them in a directory of your choice, on my Mac they live in /Android.
I've dug them up and attached adb and fastboot for all platforms. Just unzip them and put the ones for your Operating System somewhere easy to get to.
if you're on Windows you'll need drivers. The best way to get the driver is to download HTC Sync from here http://dl4.htc.com/managed-assets/support/software/htc-sync/htc_sync_setup_3.2.20.exe and install it. After it is installed make sure it isn't running.
I'm now going to go through a few simple adb command and what they're for.
To use ADB or Fastboot your phone has to be in USB Debugging mode Set this in Settings/Developer Options on the phone.
Open a Command prompt
Navigate to the location you put the adb and fastboot commands
1) adb reboot
this command does exactly what it says. If you type it without any modifiers your phone will reboot. You can also reboot recovery or reboot bootloader.
2) adb push
Adb push is the command for putting a file on your device.
The format to use the command is adb push /filelocation/filename /destination the destination is usually /sdcard
3) adb pull
this command is how you get a file off of your phone
adb pull /file location the file will be downloaded to the location of your adb executable
4) Sometimes to help you troubleshoot a problem you may be asked to provide a logcat to someone. What this means is a log of the what is happening on the device. Getting one is easy
adb logcat > logcat.txt
this will create a logcat file and save it to the directory on your computer that you're running the adb commands from. To stop the logcat just use ctrl-c
Now on to fastboot
fastboot is a special mode on Android phones that allow system level partitions to be written or commands executed.
fastboot only works if your phone is in bootloader mode.
Once in bootloader mode
open a command prompt and navigate to where you installed the fastboot executable
You need fastboot to unlock your bootloader
fastboot flash unlocktoken Unlock_code.bin
and to relock it:
fastboot oem lock
you can also use fastboot to flash recoveries
fastboot flash recovery recovery.img use the filename of the recovery you downloaded.
If you've installed the 2.20 firmware from AT&T and you have root, you'll need to flash the kernel for any new rom separately using fast boot.
unzip the rom you've downloaded and locate the boot.img file and put it in the same directory as your fastboot and dab commands
reboot to bootloader then flash the kernel using the command fastboot flash boot boot.img. after hat you can boot into recovery right from the bootloader and install your rom.
These commands are just a few very basic ones.
There's no reason to be afraid of the command line or these tools.
I hope this quick and dirty tutorial helps someone.
If there's something else that can be explained here, feel free to add it to the thread and I'll add it to the OP.

you're right. nobody should be afraid of adb/fastboot commands or understanding WHY they are useful.
i would as far to say that if you dont understand basic adb/fastboot commands, then you have no business modding your phone....

You gotta add that they need to open a command line from the directory that has adb in it and type the commands from there.

_MetalHead_ said:
You gotta add that they need to open a command line from the directory that has adb in it and type the commands from there.
Click to expand...
Click to collapse
Oh yeah, duh

gunnyman said:
Oh yeah, duh
Click to expand...
Click to collapse
You're slackin'

I would go so far to say that this lack of comfort with adb/fastboot is the single largest contributor to the issues people have had in rooting and unlocking their HOXs over the last two months. Thanks for taking the time to put this together. Should help quite a few people unsure of adb/fastboot in general.
Another adb usage that may be helpful to add to this list is adb pull of user apps before updating ROM and then pushing them back. I have often seen people unsure of the best way to restore apps after a ROM upgrade. For me TiB works great, but you need to know what to restore via TiB and what to configure again manually. I think Scott posted the general steps in one of his CleanROM threads, but adding it to this list would be good too.
Just realized it's exactly two months since I received my pre-ordered HOX . No bricks, a superb HOX that I haven't had to warranty replace for any reason so far, and then comes along Scott with his fantastic CleanROM series. What a fun-filled ride it has been so far

Add adb logcat as well please, not enough people know how to use it

nice bro! this will come in handy for those that need it. i was there once! we all were. but good job man!

rohan32 said:
Add adb logcat as well please, not enough people know how to use it
Click to expand...
Click to collapse
Good call. Tomorrow I'll update it.

Done. Keep the suggestions coming. I know enough to get someone started, but I'm no developer.

I like this. Information that won't get old and everyone needs at one point or another. Nice call gunny.
Stickify!

this is great! excellent idea gunny

Oh yeah, stickied! :highfive: Too bad noobs still won't read it lol. They never read anything :silly:

_MetalHead_ said:
Oh yeah, stickied! :highfive: Too bad noobs still won't read it lol. They never read anything :silly:
Click to expand...
Click to collapse
Yeah but now we can be snarky and say "didn't you read the effing sticky???"

What about common connection issues?
Im facing one now

Funny you should say that. Your post made me realize it was missing.

So I'm getting a replacement One X from AT&T on July 19th and need to send my current phone back. I unlocked the bootloader and flashed ROM's on my current phone, so I should just follow this guide to return my phone back to stock before shipping it out to AT&T, correct?
Sent from my HTC One X using Tapatalk 2

acles003 said:
So I'm getting a replacement One X from AT&T on July 19th and need to send my current phone back. I unlocked the bootloader and flashed ROM's on my current phone, so I should just follow this guide to return my phone back to stock before shipping it out to AT&T, correct?
Sent from my HTC One X using Tapatalk 2
Click to expand...
Click to collapse
lock bootloader install RUU
done

Simple and awesome thread. Should help a lot of people.

This really helped me out before I became a member, thanks

Unlocked bootloader

I have my Samsung note 3, and it will never be unlocked. So i was thinking about moving to this. Is the Verizon edition unlocked for custom roms?
Sent from my SM-N900V using XDA Free mobile app

scoreboard said:
I have my Samsung note 3, and it will never be unlocked. So i was thinking about moving to this. Is the Verizon edition unlocked for custom roms?
Sent from my SM-N900V using XDA Free mobile app
Click to expand...
Click to collapse
It doesn't come unlocked, but you can unlock it. That's why are a lot of us are on this phone. I had an S5 ordered, but decided against it, when I saw there wasn't any progress being made on it. I cancelled my order, bought my M8, and haven't looked back. Give me an unlocked bootloader, or give me death.

You can S-OFF (which unlocks bootloader) & root it immediately after getting it.
I came from a locked Galaxy S4 and have to say this phone is snappier than an iPhone & as unlockable as a door thats compatible with all keys ;D. Love love loveeee this phone and highly recommend it! Go for it!
I unlocked mine the moment I got home with it, no OTA update required as some people have said to do before unlocking it & as far as I've seen no ones had an actual "Oh no! They made it impossible to unlock like Sammysung!" moment.

Ive tried a for the last two days to root my htc m8..but i can not get it to work...tried htc unclock tried setting up adb...but the first gives me an mid error and the second does not recognize my phone...i did install the newest update before i tried to s-off....any help would be great...

Frausbite77 said:
Ive tried a for the last two days to root my htc m8..but i can not get it to work...tried htc unclock tried setting up adb...but the first gives me an mid error and the second does not recognize my phone...i did install the newest update before i tried to s-off....any help would be great...
Click to expand...
Click to collapse
Have u tried the weak sauce app for root then fire water to s-off?
Sent from my Insanely powered M8 using Tapatalk

holla420 said:
Have u tried the weak sauce app for root then fire water to s-off?
Sent from my Insanely powered M8 using Tapatalk
Click to expand...
Click to collapse
I set up adb using the method from root junky. but my computer won't recognize my device. I must have tried it like 50 times, so i tried the htcdev unlock method...my computer recognizes by device but after i copy the token i get the mid 160 error.

Frausbite77 said:
I set up adb using the method from root junky. but my computer won't recognize my device. I must have tried it like 50 times, so i tried the htcdev unlock method...my computer recognizes by device but after i copy the token i get the mid 160 error.
Click to expand...
Click to collapse
U must not being in the right directory
Sent from my Insanely powered M8 using Tapatalk

Frausbite77 said:
I set up adb using the method from root junky. but my computer won't recognize my device. I must have tried it like 50 times, so i tried the htcdev unlock method...my computer recognizes by device but after i copy the token i get the mid 160 error.
Click to expand...
Click to collapse
What that guy above me said, if you using Windows make sure you right click+shift in the platform tools directly then see if it shows up with adb devices, if not check your drivers.

Frausbite77 said:
Ive tried a for the last two days to root my htc m8..but i can not get it to work...tried htc unclock tried setting up adb...but the first gives me an mid error and the second does not recognize my phone...i did install the newest update before i tried to s-off....any help would be great...
Click to expand...
Click to collapse
HTCDEV unlock doesn't work for the Verizon variant. To s-off just follow this step by step guide:
http://forum.xda-developers.com/showthread.php?t=2708628
PRO TIPS: Let's say that your adb and fastboot files are located in C:\Program Files\Android. Add this directory to your system path by pressing the Windows key and typing "environment". After a few letters you'll see an option called "Edit the System Environment Variables". Click on this option. The system properties windows will open to the Advanced tab. Click the Environment Variables button. In the System Variables field you'll see a variable called Path. Click on it and choose edit. In the variable value field you'll see a list of paths separated by semi colons. We want to add the path of your adb and fastboot files to the system Path variable so that adb and fastboot commands can be executed anywhere. For the example location I used above you would add the following to the end of the list:
;C:\Program Files\Android
To test, open a command prompt and type "adb". This should launch adb with no parameters. Now you can use adb and fastboot commands anywhere. When you download the firewater script file, you can just leave it in the Downloads directory. If you use Chrome you could click the arrow next to the file and choose "show in folder". Then shift+right click an empty portion of the Downloads directory window and choose "open command window here" (you can also shift+right click on folders icons to accomplish this). Should be easy to s-off now.
NOTES:
*Once adb is setup issue the command "adb devices" to ensure your phone is recognized. The first time you will get a popup on your phone asking if you want to allow the PC adb access. Make sure you check "always allow".
*Before you issue the "su" command wait about 30 seconds to allow WeakSauce to root the phone after reboot. If you get an error saying "su not found" it's because WeakSauce has not yet rooted the phone. Wait 10 seconds and try again.
*When you issue the "su" command wake your phone's display and look for a SuperSu request. Allow it obviously.
*It's possible that the process may fail. If it does just try again. If it keeps failing try a different USB 2.0 port. Also make sure you're using the best USB cable that you have. The one that came with the phone should work.

Doc Ames said:
HTCDEV unlock doesn't work for the Verizon variant. To s-off just follow this step by step guide:
http://forum.xda-developers.com/showthread.php?t=2708628
PRO TIPS: Let's say that your adb and fastboot files are located in C:\Program Files\Android. Add this directory to your system path by pressing the Windows key and typing "environment". After a few letters you'll see an option called "Edit the System Environment Variables". Click on this option. The system properties windows will open to the Advanced tab. Click the Environment Variables button. In the System Variables field you'll see a variable called Path. Click on it and choose edit. In the variable value field you'll see a list of paths separated by semi colons. We want to add the path of your adb and fastboot files to the system Path variable so that adb and fastboot commands can be executed anywhere. For the example location I used above you would add the following to the end of the list:
;C:\Program Files\Android
To test, open a command prompt and type "adb". This should launch adb with no parameters. Now you can use adb and fastboot commands anywhere. When you download the firewater script file, you can just leave it in the Downloads directory. If you use Chrome you could click the arrow next to the file and choose "show in folder". Then shift+right click an empty portion of the Downloads directory window and choose "open command window here" (you can also shift+right click on folders icons to accomplish this). Should be easy to s-off now.
NOTES:
*Once adb is setup issue the command "adb devices" to ensure your phone is recognized. The first time you will get a popup on your phone asking if you want to allow the PC adb access. Make sure you check "always allow".
*Before you issue the "su" command wait about 30 seconds to allow WeakSauce to root the phone after reboot. If you get an error saying "su not found" it's because WeakSauce has not yet rooted the phone. Wait 10 seconds and try again.
*When you issue the "su" command wake your phone's display and look for a SuperSu request. Allow it obviously.
*It's possible that the process may fail. If it does just try again. If it keeps failing try a different USB 2.0 port. Also make sure you're using the best USB cable that you have. The one that came with the phone should work.
Click to expand...
Click to collapse
Thank you for letting me know about the HTC Dev...I have a mac and set up ADB...it shows my phone off line...i get the message that says allow this computer and check always...i run adb devices and now it just returns blank...i reinstall drivers which is htc sync but the problem persists....

Frausbite77 said:
Thank you for letting me know about the HTC Dev...I have a mac and set up ADB...it shows my phone off line...i get the message that says allow this computer and check always...i run adb devices and now it just returns blank...i reinstall drivers which is htc sync but the problem persists....
Click to expand...
Click to collapse
Try 'adb kill-server' then issue 'adb start-server' then try 'adb devices'. If that doesn't work, try a different USB port. If still no joy try a different USB cable. If that doesn't work try restarting the Mac, restarting the phone, spinning around in an office chair three times, and blowing into a Nintendo cartridge. If that doesn't work I don't know what else to suggest besides trying it on a different computer or maybe in Windows. I've never had an issue with ADB so if somebody else has any ideas for Frausbite77 please chime in.
Edit: I googled this Mac ADB guide. I don't know if it really matters, but it says to have ADB/fastboot in the /usr/bin directory. Check it out. There's a script file and when run it installs the Android SDK tools to the appropriate folder. Also check the comments. Somebody else has probably had the same problem as you:
http://htc-one.wonderhowto.com/how-...-mac-os-x-send-commands-your-htc-one-0151178/
Edit 2: After reading a user's comment that the script was broken I looked at the script and it was, in fact, broken. I fixed it. Follow the guide but use this zip instead:

Doc Ames said:
Try 'adb kill-server' then issue 'adb start-server' then try 'adb devices'. If that doesn't work, try a different USB port. If still no joy try a different USB cable. If that doesn't work try restarting the Mac, restarting the phone, spinning around in an office chair three times, and blowing into a Nintendo cartridge. If that doesn't work I don't know what else to suggest besides trying it on a different computer or maybe in Windows. I've never had an issue with ADB so if somebody else has any ideas for Frausbite77 please chime in.
Edit: I googled this Mac ADB guide. I don't know if it really matters, but it says to have ADB/fastboot in the /usr/bin directory. Check it out. There's a script file and when run it installs the Android SDK tools to the appropriate folder. Also check the comments. Somebody else has probably had the same problem as you:
http://htc-one.wonderhowto.com/how-...-mac-os-x-send-commands-your-htc-one-0151178/
Edit 2: After reading a user's comment that the script was broken I looked at the script and it was, in fact, broken. I fixed it. Follow the guide but use this zip instead:
Click to expand...
Click to collapse
Ok, well so I never got adb to show my device on line....but when i typed ./adb reboot, the device actually responds to the commands...taking a risk i went ahead and pushed the firewater files and the process worked. I was able to unlock my device and install twrp...so i figured out that for and to work i have to type in ./ before i type in any commands...i don't if i messed something up along the way or what...but in the end i have gotten i was able to root and get s off....maybe i got lucky lol...thanks so much for the help!!

Frausbite77 said:
Ok, well so I never got adb to show my device on line....but when i typed ./adb reboot, the device actually responds to the commands...taking a risk i went ahead and pushed the firewater files and the process worked. I was able to unlock my device and install twrp...so i figured out that for and to work i have to type in ./ before i type in any commands...i don't if i messed something up along the way or what...but in the end i have gotten i was able to root and get s off....maybe i got lucky lol...thanks so much for the help!!
Click to expand...
Click to collapse
That's the proper command line for using Adb on a Mac. It won't work without using ./ before the command.
Sent from my HTC6525LVW using Tapatalk

Frausbite77 said:
Ok, well so I never got adb to show my device on line....but when i typed ./adb reboot, the device actually responds to the commands...taking a risk i went ahead and pushed the firewater files and the process worked. I was able to unlock my device and install twrp...so i figured out that for and to work i have to type in ./ before i type in any commands...i don't if i messed something up along the way or what...but in the end i have gotten i was able to root and get s off....maybe i got lucky lol...thanks so much for the help!!
Click to expand...
Click to collapse
My bad. I should have mentioned that to execute a file in a Unix-like operating system you need to enter the full or relative path if it's not in your $Path environment variable. That's why you needed to add a './' before the command. The './' indicates that the file is in the current directory. That's probably why that guide recommended putting adb and fastboot in /usr/bin. If you want to fix it so that adb and fastboot commands can be run from anywhere open a terminal, change to the directory where adb and fastboot are located, and issue the following commands:
sudo mv adb /usr/bin
sudo mv fastboot /usr/bin
That will move adb and fastboot into /usr/bin which is in your $Path so you can issue the commands anywhere without using './'. I'm glad you got your M8 s-offed and recovery installed. If you're looking into custom ROMs, I can personally recommend ViperOne as a great stock option and LiquidSmooth as an AOSP option. Try em' out. Now that you have recovery you can just restore a backup if you don't like your current ROM.

Doc Ames said:
My bad. I should have mentioned that to execute a file in a Unix-like operating system you need to enter the full or relative path if it's not in your $Path environment variable. That's why you needed to add a './' before the command. The './' indicates that the file is in the current directory. That's probably why that guide recommended putting adb and fastboot in /usr/bin. If you want to fix it so that adb and fastboot commands can be run from anywhere open a terminal, change to the directory where adb and fastboot are located, and issue the following commands:
sudo mv adb /usr/bin
sudo mv fastboot /usr/bin
That will move adb and fastboot into /usr/bin which is in your $Path so you can issue the commands anywhere without using './'. I'm glad you got your M8 s-offed and recovery installed. If you're looking into custom ROMs, I can personally recommend ViperOne as a great stock option and LiquidSmooth as an AOSP option. Try em' out. Now that you have recovery you can just restore a backup if you don't like your current ROM.
Click to expand...
Click to collapse
Thanks for the advice...actually i was just going to ask about some roms...just flashed viper rom and gonna give it a go...thanks for all the help...

Frausbite77 said:
Thanks for the advice...actually i was just going to ask about some roms...just flashed viper rom and gonna give it a go...thanks for all the help...
Click to expand...
Click to collapse
You'll love it. A couple thing to note though. For some reason the 1.6 download doesn't actually contain the 1.6 OTA so you'll want to go to 'About phone' and update to 1.6. Also I believe that ViperOne defaults to power saver mode. You can change this by using the toggle in the notification drawer. If you want to add power saver and extreme power saver to the settings menu follow this guide:
http://forum.xda-developers.com/showthread.php?t=2710946

Doc Ames said:
You'll love it. A couple thing to note though. For some reason the 1.6 download doesn't actually contain the 1.6 OTA so you'll want to go to 'About phone' and update to 1.6. Also I believe that ViperOne defaults to power saver mode. You can change this by using the toggle in the notification drawer. If you want to add power saver and extreme power saver to the settings menu follow this guide:
http://forum.xda-developers.com/showthread.php?t=2710946
Click to expand...
Click to collapse
wow, man viper rom is insane, thanks for the update heads up...i wouldn't have even thought to do that...guess i have tons of reading to catch up on...thanks...

[Q] Accidentally wiped the system and now my Nexus 5 says No OS installed!

I wiped the system thinking it was part of the system factory reset in TWRP but i didnt know that it would result in it saying NO OS INSTALLED. i read other similar threads about this problem but dont exactly understand what to do and how to restore my phone. i have a nandroid backup but its on my pc and not the internal storage on the phone. im fairly new to this so those replying, please explain exactly what to do. Im so scared about what to do now :crying::crying::crying:

Don't be scared its common and very, very easy to fix
Now I don't use TWRP so I have no idea of the directory structure so I can't advise you exactly.
But what you will essentially do is use adb push to get the files on your phone.
Click the link in my signature to go to the sticky roll up thread. All the important threads are linked there. Y
In that thread you'll quickly find my adb info thread. This should be most of what you need to know
Sent from my Nexus 5 using Tapatalk

First relax, your phone is not ruined. I assume you have a custom recovery. You're going to have to either side load a rom zip using adb or adb push a rom zip onto your phone and flash it in recovery.
Edit, OP you'll want to push the rom to /sdcard/Download. That'll put it into the folder twrp defaults to look for it.
Sent from my Nexus 5 using XDA Free mobile app

Well, you have three pretty easy options.
TWRP supports ADB commands, but the stock Google driver won't work. If you install the Universal ADB Driver you should be able to push your backup to your device (adb push [file location on your computer] [where to push on your phone])
http://www.koushikdutta.com/post/universal-adb-driver
You could also flash a ROM through adb sideload. Download a ROM zip to your computer, then in TWRP choose Advanced -> ADB Sideload. Then run "adb sideload [zip file]" to sideload the ROM you downloaded.
Last, you can restore to the Nexus Factory Image.
https://developers.google.com/android/nexus/images
All of these options will require you to have the Android SDK setup on your computer. The link for the factory images has instructions on how to get that installed.

raptir said:
]
All of these options will require you to have the Android SDK setup on your computer. The link for the factory images has instructions on how to get that installed.
Click to expand...
Click to collapse
Luckily its easier install adb and fastboot than the ask method. Just go to the thread mentioned earlier and use the 15 second installer
OP, no matter what you'll need run that installer
Sent from my Nexus 5 using Tapatalk

All these guys have it spot on! I just wanted to mention that when you install a ROM system gets wiped automatically as this is a parameter in the zip's updater-script.
So in other words there is really no reason to wipe system manually. Just let the install process do it for you. If u wipe system manually and then you realize you do not have a ROM zip or a nandroid only ADB can save you. So this way you can save yourself a headache

raptir said:
Well, you have three pretty easy options.
TWRP supports ADB commands, but the stock Google driver won't work. If you install the Universal ADB Driver you should be able to push your backup to your device (adb push [file location on your computer] [where to push on your phone])
\
You could also flash a ROM through adb sideload. Download a ROM zip to your computer, then in TWRP choose Advanced -> ADB Sideload. Then run "adb sideload [zip file]" to sideload the ROM you downloaded.
Last, you can restore to the Nexus Factory Image.
All of these options will require you to have the Android SDK setup on your computer. The link for the factory images has instructions on how to get that installed.
Click to expand...
Click to collapse
I downloaded everything and ran the flash-all . bat file but its currently been on < waiting for device > for a while now. i think it didnt detect the phone although it is connected through the USB :/

thauri said:
I downloaded everything and ran the flash-all . bat file but its currently been on < waiting for device > for a while now. i think it didnt detect the phone although it is connected through the USB :/
Click to expand...
Click to collapse
Did you or did you not read my adb and fastboot thread?
And WHY are you going for the last resort first???
You really need to chill out and read things because I don't think you're thinking straight
Sent from my Nexus 5 using Tapatalk

raptir said:
Well, you have three pretty easy options.
TWRP supports ADB commands, but the stock Google driver won't work. If you install the Universal ADB Driver you should be able to push your backup to your device (adb push [file location on your computer] [where to push on your phone])
You could also flash a ROM through adb sideload. Download a ROM zip to your computer, then in TWRP choose Advanced -> ADB Sideload. Then run "adb sideload [zip file]" to sideload the ROM you downloaded.
Last, you can restore to the Nexus Factory Image.
All of these options will require you to have the Android SDK setup on your computer. The link for the factory images has instructions on how to get that installed.
Click to expand...
Click to collapse
rootSU said:
Luckily its easier install adb and fastboot than the ask method. Just go to the thread mentioned earlier and use the 15 second installer
OP, no matter what you'll need run that installer
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
yeah i did download the 15 second ADB installer but my computer isnt detecting the phone connected when i ran the flash-all . bat file.

1) you need to read the whole of my thread. There are drivers to install
2) Still dont understand why you're running flashall bat when you can just adb push your backup to your sdcard. You know you lose all your data when you do that?
Sent from my Nexus 5 using Tapatalk

rootSU said:
1) you need to read the whole of my thread. There are drivers to install
2) Still dont understand why you're running flashall bat when you can just adb push your backup to your sdcard. You know you lose all your data when you do that?
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
ok yes im reading your thread and doing the ADB commands. i have a question though, the multi-line input for the code to ADB push goes in cmd right? how is that possible?

Yes
Type one line, press enter, type another line, press enter
Sent from my Nexus 5 using Tapatalk

rootSU said:
Yes
Type one line, press enter, type another line, press enter
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
when i press enter after adb shell and mount data, it says data failed : Device or Resource busy

thauri said:
when i press enter after adb shell and mount data, it says data failed : Device or Resource busy
Click to expand...
Click to collapse
If "mount data" shows device or resource busy, then that usually means it is already mounted.

rootSU said:
If "mount data" shows device or resource busy, then that usually means it is already mounted.
Click to expand...
Click to collapse
i did everything but in the last part, it doesnt transfer the recovery files to the phone
Edit: The files are transferring successfully but only one at a time.
EDIT 2: All the necessary files were transferred but the TWRP recovery mode isnt detecting it as a restore option

Messing up is scary but it's a great opportunity to learn. I think you'll get through this just fine.

thauri said:
i did everything but in the last part, it doesnt transfer the recovery files to the phone
Edit: The files are transferring successfully but only one at a time.
EDIT 2: All the necessary files were transferred but the TWRP recovery mode isnt detecting it as a restore option
Click to expand...
Click to collapse
It must be in the exact location twrp needs to see it.
Sent from my Nexus 5 using Tapatalk

rootSU said:
It must be in the exact location twrp needs to see it.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I did, I put it in the backup folder in TWRP where all the other backups usually were

thauri said:
I did, I put it in the backup folder in TWRP where all the other backups usually were
Click to expand...
Click to collapse
Take a new backup, then delete everything in the new backup folder and move everything from your old backop into the new backup folder,
So for example
Code:
adb shell
mount /data
cd /data/media/0/TWRP/backups
ls
^^ This should list the contents... You should see your old backup and your new backup (which will be mostly empty).
Lets pretend your new backup folder is 22222222 and your old backup folder is 11111111
Code:
rm -Rf 222222222/*
mv 111111111/* 222222222
The first command is a remove (recursive) of the contents of the new backup. second command mvs contents of old backup into new backup folder,
Try that.
I don't know TWRP so my assumptions of the path may be incorrect

Someone else posted twrp default path as /sdcard/downloads - try that.

[Q] I need help with my Nexus 5 with no OS on it.

I screwed up trying to restore and now it says the phone is not rooted and has no OS installed on it. I still have access to the custom recovery if that helps. I have tried using ADB and Fastboot but it does not seem to be working. I need to know asap because it is for my dad and he travels a lot. He needs a phone. Please any help is appreciated.

1.Flash twrp
2. Go to adb sideload
3. In the terminal type adb sideload filename.zip
The ROM will flash and that's it.
If you need it back to stock just google "nexus 5 factory image" then download the latest one and follow the instructions given by google.
Also are you running linux (which distro) or windows just so I know what to tell you if that doesn't work

First of al: It's best to not use Windows 8 since there have been some driver incompatibilities and I'm not sure if they have been completely fixed yet.
Install 'Universal Naked Driver' and 'Minimal ADB and fastboot'. Both can be found here on xda.
Download the latest factory image for hammerhead from Google website. Extract the downloaded file twice and copy over everything to your 'Minimal ADB and fastboot' install dir.
Double click the flash-all.bat while your phone is in bootloader mode.
This will COMPLETELY reset your phone (all personalbdata will be wiped). Only the bootloader will stay unlocked.

awsumatt said:
1.Flash twrp
2. Go to adb sideload
3. In the terminal type adb sideload filename.zip
The ROM will flash and that's it.
If you need it back to stock just google "nexus 5 factory image" then download the latest one and follow the instructions given by google.
Also are you running linux (which distro) or windows just so I know what to tell you if that doesn't work
Click to expand...
Click to collapse
When trying step 3, it says cannot read sideload.

The command is not "sideload filename.zip" but
"adb sideload filename.zip"
Did you enter it correctly?

What does the terminal say as an error? And are you running Linux, Mac, or windows?

experience7 said:
The command is not "sideload filename.zip" but
"adb sideload filename.zip"
Did you enter it correctly?
Click to expand...
Click to collapse
Yes that is exactly how i entered it but with the file name of course. Although I did try your method but i don't see any file called flash-all.bat.

So just gonna ask again, what message did you get in the terminal?

Did you extract it twice? There should be a tgz file at some point... this one can be extracted as well (using 7-zip for example)

experience7 said:
The command is not "sideload filename.zip" but
"adb sideload filename.zip"
Did you enter it correctly?
Click to expand...
Click to collapse
okay nevermind my last comment. Now it says fastboot is not recognizable internal or external command. Press any key to exit

After you copied all the files into the Minimal ADB and fastboot folder the flash-all.bat should be in the same directory as fastboot.exe. Is this the case?

Try adb kill-server then (I'm a little rusty with windows) su adb start-server

experience7 said:
Did you extract it twice? There should be a tgz file at some point... this one can be extracted as well (using 7-zip for example)
Click to expand...
Click to collapse
Okay after I run the flash-all.bat, it just hangs at waiting for device

Install the 'Universal Naked Driver', reboot your computer and try again.
Again: The phone has to be in bootloader mode (you have to see the green android)

experience7 said:
Install the 'Universal Naked Driver', reboot your computer and try again.
Again: The phone has to be in bootloader mode (you have to see the green android)
Click to expand...
Click to collapse
I've decided to take the loss on this one. I just do not have time for this. I'll just go get it replaced. Thank you so much for the help. I'll definitely use XDA for more of my android problems in the future. Thank you again and to everyone who replied to this thread.

sbecerra407 said:
I've decided to take the loss on this one. I just do not have time for this. I'll just go get it replaced. Thank you so much for the help. I'll definitely use XDA for more of my android problems in the future. Thank you again and to everyone who replied to this thread.
Click to expand...
Click to collapse
Install this(fastboot + adb): http://forum.xda-developers.com/showthread.php?t=2588979
Download the file for Nexus 5: https://developers.google.com/android/nexus/images
Extract the file
Connect phone to pc in bootloader mode
Double click in flash all script
Wait for it to finish

sbecerra407 said:
When trying step 3, it says cannot read sideload.
Click to expand...
Click to collapse
ofc... you need to ENABLE sideload on twrp itself..

Thread cleaned.
Let's keep it on topic guys,