[Q] Moto RAZR XT910 - Not able to Flash - General Questions and Answers

Hello Guys,
I installed JB leak in my Moto RAZR xt910 and was using till now,
And i didnt have any CWM Recovery installed in mine, so to install that , i tried a thread from xda ( cant remember which one )
It was "RazerTouchBlack.apk" . after installing that and trying to install CWM, my phone showed error " Encryption Unsuccessful" and was not able to proceed further.
Then i decided to Flash it with stock ROM, tried several ROM's with RSD Lite.
For every ROM , It fails at "cdt.bin_signed" -> PHONE returned FAIL
What am i supposed to do ?
I just want my phone back alive.
- John

JohnTUH said:
Hello Guys,
I installed JB leak in my Moto RAZR xt910 and was using till now,
And i didnt have any CWM Recovery installed in mine, so to install that , i tried a thread from xda ( cant remember which one )
It was "RazerTouchBlack.apk" . after installing that and trying to install CWM, my phone showed error " Encryption Unsuccessful" and was not able to proceed further.
Then i decided to Flash it with stock ROM, tried several ROM's with RSD Lite.
For every ROM , It fails at "cdt.bin_signed" -> PHONE returned FAIL
What am i supposed to do ?
I just want my phone back alive.
- John
Click to expand...
Click to collapse
Your bootloader is locked. Flash your phone back to stock LINK and install THIS as a working recovery system (Its Safestrap including TWRP 2.7)

Can't Flash
LS.xD said:
Your bootloader is locked. Flash your phone back to stock LINK and install THIS as a working recovery system (Its Safestrap including TWRP 2.7)
Click to expand...
Click to collapse
Hi,
I tried the Stock ROM which you mentioned and it gives me an error
"E: Signature verification failed"
Installation Aborted
??
:/
And is there any was i can install CWM recovery by flashing ?? or safestrap or any recovery ??
Thanks guys ... I installed latest ROM and it worked... Thanks a ton !

JohnTUH said:
Hi,
I tried the Stock ROM which you mentioned and it gives me an error
"E: Signature verification failed"
Installation Aborted
??
:/
And is there any was i can install CWM recovery by flashing ?? or safestrap or any recovery ??
Thanks guys ... I installed latest ROM and it worked... Thanks a ton !
Click to expand...
Click to collapse
Problem solved?

Related

Clockwork: Installation aborted

Hi, With flashed any rom I try to tell me: installation aborted ..
Why?
moropazzo96 said:
Hi, With flashed any rom I try to tell me: installation aborted ..
Why?
Click to expand...
Click to collapse
does it give you an error? is your signature verification turned off in your clockwork recovery? are you flashing roms that are made for your model phone?
I tried to flash the original rom.. It gives me an error reading the sd..
I had the same problem, when I tried to flash a ROM it gave me an error. Which version of CWM you are using?
HELP!
i have the same damn problem. It says status 7 as well. I cant flash any roms, not CM7, ICS, Stock 2.3.6. All i can do is restore a nandroid backup of 2.3.1 and that is stuck in airplane mode so i cant even use my phone. Please help before i throw this in the garbage.

[Q] HELP! Can't flash custom ROM, status 7 error =(

Hi every i've been trying to flash my tmobile HTC ONE S to ParanoidAndroid JellyBean v2.13,fromt this link
http://forum.xda-developers.com/showthread.php?t=1890464
I unlocked(still s-on), rooted, and tried a couple different recoveries (CWM 5.8.31,5.8.24,5.8.15 etc. and TWRP 1.7, 2.2)
what I did was first unlock,then flash recovery, and root, then flash boot.img from the ROM package, and install from SDcard. However everytime I get a Status 7 error messege, and installation fails...
And one time I tried to install from CWM ROM manger from Google Play in the OS, still failed after it reboot and goes in to recovery.
Some people on the web says that this means I need a different or newer recovery, but I've probably tried all the main and newest versions.....
pls help! thnx in advance!! =)
nvm!!! I was stupid enough to download the ROM version for HTC ONE X..hahaha..

problem flashing roms on moto g xt1032

Hi, I'm new to flashing roms and after installing CWM 6.0.4.7 on my xt1032 and rooting whenever i try to flash a rom it gets stuck in the boot animation. I have tried CM 11 Carbon rom and paranoid android. I don't know if I'm using the wrong GAPPS or what. Please help.
Gapps are not the problem:the same thing was happening to me. The real problem is the bootloader: if you are on kitkat, you have to revert to stock jelly bean (4.3), install custom recovery (for JB), root and flash the custom rom you desire. That's the only way that worked for me.
Sent from my falcon using xda app-developers app
skorpionvenom said:
Gapps are not the problem:the same thing was happening to me. The real problem is the bootloader: if you are on kitkat, you have to revert to stock jelly bean (4.3), install custom recovery (for JB), root and flash the custom rom you desire. That's the only way that worked for me.
Sent from my falcon using xda app-developers app
Click to expand...
Click to collapse
Ok thanks, I will try that when i have some free time. And how do you revert back to 4.3
never mind i found a post on how to testing now
Brick?
skorpionvenom said:
Gapps are not the problem:the same thing was happening to me. The real problem is the bootloader: if you are on kitkat, you have to revert to stock jelly bean (4.3), install custom recovery (for JB), root and flash the custom rom you desire. That's the only way that worked for me.
Sent from my falcon using xda app-developers app
Click to expand...
Click to collapse
I tried o revert to 4.3 but when flashing boot.img it said hab check failed for boot and now when i try to boot up it goes to the unlock booloader warning turns off and repeats. I can get back to fastboot but when i try to enter recovery it shows a broken android lying sideways. I think i bricked my phone. I really need help
Go back to Stock and start from Scratch.
As long as you can enter fastboot you should be fine.
I too have suffered with this problem, today i have done as above said, reflashed 4,3 but when i onstalled the cwm 4.3 version i still suffered the same problem, so i tried the cwm4.4 and hey presto, i now have cm11 on my phone, yee haaa
A Wild Willis said:
I tried o revert to 4.3 but when flashing boot.img it said hab check failed for boot and now when i try to boot up it goes to the unlock booloader warning turns off and repeats. I can get back to fastboot but when i try to enter recovery it shows a broken android lying sideways. I think i bricked my phone. I really need help
Click to expand...
Click to collapse
Try this,when you get to the broken android follow the instructions in the link below for "external reset" this will reset your phone.
https://motorola-global-portal.cust..._detail/a_id/97329/p/30,6720,9050/action/auth
if that fails just flash a stock 4.4 image with fastboot using one of the guides.
Worked
quizmaniac said:
Try this,when you get to the broken android follow the instructions in the link below for "external reset" this will reset your phone.
https://motorola-global-portal.cust..._detail/a_id/97329/p/30,6720,9050/action/auth
if that fails just flash a stock 4.4 image with fastboot using one of the guides.
Click to expand...
Click to collapse
Yes thank you so much I'm back on 4.4.2 You guys are great
hello everyone
I have a question about PaulOBrien superboot root method (look in modaco forum the moto g root method 1).
I have a 16GB Moto G and updated to Kitkat via OTA.
yesterday I used the method 1 (superboot) on windows 7, to root my phone, and run it for the first time and ended on a black screen with green bars (supposedly normal). I power off the phone and turned on and load kitkat normally and noted that the phone was not rooted.
y tried the method for a second time and have the same results (ended on a black screen with green bars), but when kirkat launched, on the initial screen i saw a message "System UIDs Inconsistent. UIDs on the system are inconsistent, you need to wipe your data partition or your device will be unstable." and the system didn't respond.
I performed a factory reset via stock recobey and kitkat showed the same message but let me in the "i´m feeling lucky button" worked this time. there I noticed that my device was now rooted but non app was able to access the internal memory due to some r/w permissions as I think, because when I try to copy files to the phone via USB cable, I get have the same denial, even whit ADB push i get the same message of permissions denial.
I need a way to solve this because in this actual stage the phone works but the apps have like no access to the memory making them unusable,
for example i cannot take a picture, or download a file, for some reason all google apps not work or force close every time.
I need a way to upload a .img file to the phone in order to perform a recobery or to make a fresh install via fastboot, donn't know how to make the phone let me wrhite files on it. :crying:
(note: sorry for my bad English)
A Wild Willis said:
I tried o revert to 4.3 but when flashing boot.img it said hab check failed for boot and now when i try to boot up it goes to the unlock booloader warning turns off and repeats. I can get back to fastboot but when i try to enter recovery it shows a broken android lying sideways. I think i bricked my phone. I really need help
Click to expand...
Click to collapse
As long as you can enter the bootloader you haven't bricked anything!!! so don't you worry!
I have two questions: when did you download the stock rom, did you check the MD5 ??? Are you sure that it wasn't a bad download ?
Additionally: are you sure that you have downloaded the appropriate ROM? Did you try to flash any other ROM?
will8578 said:
I too have suffered with this problem, today i have done as above said, reflashed 4,3 but when i onstalled the cwm 4.3 version i still suffered the same problem, so i tried the cwm4.4 and hey presto, i now have cm11 on my phone, yee haaa
Click to expand...
Click to collapse
i'm having troubles too...
tried to install custom roms (c-rom and liquid rom), coming from 4.4 (unlocked and rooted) stock but it stays at the bootanimation.
flashed a stock 4.3, rooted installed, tried 2 recoveries (cwm and twrp), tried c-rom once more...
same problem :crying:
i've run out of options, so have to flash a stock 4.4 again, unless someone gives me thé idea what i can do to make it work.
xt1032
dreezz said:
i'm having troubles too...
tried to install custom roms (c-rom and liquid rom), coming from 4.4 (unlocked and rooted) stock but it stays at the bootanimation.
flashed a stock 4.3, rooted installed, tried 2 recoveries (cwm and twrp), tried c-rom once more...
same problem :crying:
i've run out of options, so have to flash a stock 4.4 again, unless someone gives me thé idea what i can do to make it work.
xt1032
Click to expand...
Click to collapse
I am having the same issue. I got this xt1032 after it was OTA upgraded to Lollipop 5.0.2 and I downgraded it to KitKat 4.4.4 Stock. Now I'm also getting stuck on the boot animations on every Custom ROM I try to flash on it.
Does anyone know if having the bootloader upgraded due to the Lollipop update has anything to do with this? mine is at Ver. 41.18.
EDIT: I was finally able to flash after Formatting Data from Recovery. Keep in mind this will basically delete everything from the internal storage and you need to put everything back there manually. Always make sure you backup your info/apps/music/fotos before Formatting Data.

ROM installation problems

I've been flashing ROMs, recoveries etc for years on every android device I've had, from Samsung to nexus, HTC. Everything. This is my first Motorola and I'm having a lot of problems.
Unlocked the boot loader, flashed TWRP but wouldn't backup my stock ROM so put on Pholz recovery and it wouldn't backup either.
Tried to install C-Rom after the usual wipes and just sticks at boot screen. Tried Tweakone ROM I think its called and same problem.
Any ideas? I have the XT1032
I know about restoring to factory but what I'm asking is, is there anything specific I'm doing wrong? I'm quite an experienced flasher. Research is showing me how to recover the phone but what's gonna stop it happening again
Sent from my Nexus 5 using Tapatalk
A lot of users report issues not being able to flash rom's on 4.4.2 kitkat.
A fix is to downgrade to 4.3, then flash roms.
I dont know why. I bought my device upgraded to 4.4.2 already, and i can flash roms with no issues.
Search the forum for the topic and you will find the info you need.
Roshi69 said:
I've been flashing ROMs, recoveries etc for years on every android device I've had, from Samsung to nexus, HTC. Everything. This is my first Motorola and I'm having a lot of problems.
Unlocked the boot loader, flashed TWRP but wouldn't backup my stock ROM so put on Pholz recovery and it wouldn't backup either.
Tried to install C-Rom after the usual wipes and just sticks at boot screen. Tried Tweakone ROM I think its called and same problem.
Any ideas? I have the XT1032
I know about restoring to factory but what I'm asking is, is there anything specific I'm doing wrong? I'm quite an experienced flasher. Research is showing me how to recover the phone but what's gonna stop it happening again
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
It wont backup saying what error?
Twrp just said 'failed' in red writing after the data backup I think. And philz touch said something along the lines of Not being able to write a file into the \clockworkmod folder.
I bought the device with 4.4.2 on it and followed the guides after reading up about the problems etc but TWRP 2.7.0.0 had a lot of reports that everything was working on it so went ahead with it
Sent from my Nexus 5 using Tapatalk
Ya that's strange because philz works great for me. Do you have a USB otg to try an external backup?
Sent from my XT1032 using Tapatalk
I got the phone booted again by following a guide and flashing a stock rom.
Installed Philz recovery again and still getting the backup error. it says: E: Error while backing up boot image!
So understandably i am now scared to flash another rom in case i get a boot loop again.
*update* Strangely i flashed TWRP via CWM, rebooted into TWRP 2.7.0.0 and performed a backup successfully.
Roshi69 said:
I got the phone booted again by following a guide and flashing a stock rom.
Installed Philz recovery again and still getting the backup error. it says: E: Error while backing up boot image!
So understandably i am now scared to flash another rom in case i get a boot loop again.
*update* Strangely i flashed TWRP via CWM, rebooted into TWRP 2.7.0.0 and performed a backup successfully.
Click to expand...
Click to collapse
Why dont you use Clockwork mod recovery for flashing Rom. I have flashed 10 Roms with that and all are backed up with out any problems. TWRP has no official support for moto g, and instead of all that why don't you try Cyanogenmod ?
(sorry if my english is not perfect)
Hello,
I have exactly the same problem with my XT1032.
Bootloader unlocked, CWM (6.0.4.7) successfully installed and backup done with no issues.
But custom roms won't load...
CM11 is stuck at "bootloader unlocked warning screen" and SlimKat is stuck at slimkat logo.
I never had such problems on my Nexus..
Please help me, I don't know what's going on
TheSkweed said:
I have exactly the same problem with my XT1032.
Bootloader unlocked, CWM (6.0.4.7) successfully installed and backup done with no issues.
But custom roms won't load...
CM11 is stuck at "bootloader unlocked warning screen" and SlimKat is stuck at slimkat logo.
Click to expand...
Click to collapse
Same here. It may be possible to downgrade to 4.3 (see here), but would it then be possible to flash a 4.4.2-based custom ROM ? I'm not sure.
Heres the steps I took.
*******Before device was stuck at bootloop*******
1. Bought phone (XT1032)
2. unlocked boot loader
3. Rooted
4. Flashed Philz Recovery (wouldn't backup rom)
5. Flashed TWRP and CWM with same issue.
6. Flashed 2 ROMs to try it (TweakyOne + C-Rom, Both wouldn't boot. and tried on all recoveries.
********Steps after being stuck at bootloop*******
1. Followed this amazing guide here (https://www.youtube.com/watch?v=laU6NQ0LxR0)
2. Set up the stock ROM again
3. Flashed TWRP 2.7.0.0 via Fastboot
4. Backup worked successfully
5. installed CM11 and setup successfully
6. installed Lego rom just to assure myself (currently running this ROM)
I know this is no solution at all but just wanted to share my steps to see what maybe fixed my phone. possibly the stock 4.2.2 rom I flashed was the solution. Maybe the original factory ROM that came on the phone was the issue?

cant install any rom's

Hello, i was looking for some diferent rom ( was using cm12.1) and wanted to try blisspop 6.0 , idk why it didnt work with cwm recovery so i tryed to instal twrp recovery, i saw i have to wipe all the data so i entered "advanced mode" and wiped everything except microsd and now i cant install any rom, every of them just write "E:Error executing updater binary in zip 'romname.zip' "
i was looking a bit, found some fixes, power off and let twrp install supersu, it offers it again anyway. Or it was some files to install, but im afraid cuz it was in topics for phones and idk if this files arent specificly for this phones... did anyone had same problem or know how to fix it?
siroga825 said:
Hello, i was looking for some diferent rom ( was using cm12.1) and wanted to try blisspop 6.0 , idk why it didnt work with cwm recovery so i tryed to instal twrp recovery, i saw i have to wipe all the data so i entered "advanced mode" and wiped everything except microsd and now i cant install any rom, every of them just write "E:Error executing updater binary in zip 'romname.zip' "
i was looking a bit, found some fixes, power off and let twrp install supersu, it offers it again anyway. Or it was some files to install, but im afraid cuz it was in topics for phones and idk if this files arent specificly for this phones... did anyone had same problem or know how to fix it?
Click to expand...
Click to collapse
ok fixed, just have to install lastest version of twrp, bliss pop 6.0 wont start anyway but atlast im abkle to install it or any other rom
siroga825 said:
ok fixed, just have to install lastest version of twrp, bliss pop 6.0 wont start anyway but atlast im abkle to install it or any other rom
Click to expand...
Click to collapse
Can you post a link or send it to me in a private message? and what twrp version you were running and the new one?
Mohdhamm said:
Can you post a link or send it to me in a private message? and what twrp version you were running and the new one?
Click to expand...
Click to collapse
im already back on stock rom on it but i belive lastest twrp from https://twrp.me/devices/nvidiahshieldtablet.html was the working one ....

Categories

Resources