someone help me to fix this problem very thank you!!!!!
i have doing this http://forum.xda-developers.com/showthread.php?t=2696987 for flash this roms http://forum.xda-developers.com/showthread.php?t=2410616 and before loading all it get SOD and red light wont turn on
someone help fix this problem thanks :crying:
cbking123 said:
someone help me to fix this problem very thank you!!!!!
i have doing this http://forum.xda-developers.com/showthread.php?t=2696987 for flash this roms http://forum.xda-developers.com/showthread.php?t=2410616 and before loading all it get SOD and red light wont turn on
someone help fix this problem thanks :crying:
Click to expand...
Click to collapse
1*run sony update services
2*press and hold vol down + power and conntect your usb to phone
3*phone well be factory reset
medo_kunny said:
1*run sony update services
2*press and hold vol down + power and conntect your usb to phone
3*phone well be factory reset
Click to expand...
Click to collapse
i tried it...but the phone does not detect by computer @[email protected]
Red Light of Death!!!!
OK here's what me and my friend did with when he semi bricked it too and couldn't turn on or turn off his phone. :laugh:
1) Install Sony Companion
2) Enter repair mode
3) While connecting the phone to USB, press VolDwn+Pwr upto approximately 5 secs
4) Even if you had a red light before, it should turn to light blue/cyan.
5) The Companion will auto download the firmware and "repair" your phone. (This takes really long say..... around an hour)
6) Enjoy!
ÆSIR said:
OK here's what me and my friend did with when he semi bricked it too and couldn't turn on or turn off his phone. :laugh:
1) Install Sony Companion
2) Enter repair mode
3) While connecting the phone to USB, press VolDwn+Pwr upto approximately 5 secs
4) Even if you had a red light before, it should turn to light blue/cyan.
5) The Companion will auto download the firmware and "repair" your phone. (This takes really long say..... around an hour)
6) Enjoy!
Click to expand...
Click to collapse
that was useless for me bro
cbking123 said:
that was useless for me bro
Click to expand...
Click to collapse
If that process didn't work for you, it should be hardbrick. What did you do before you bricked your phone?
---------- Post added at 01:26 PM ---------- Previous post was at 01:20 PM ----------
Hi, I just checked your message again. You flashed a Micromax custom rom to Xperia C. It is hardbricked.
Your preloader and boot is crushed. Your device will never start and pc will never recognize it. If you have warranty, just send your device and they replace the motherboard. If you don't have warranty you need to buy new motherboard.
Same thing happened to me while developing custom rom. I tried everything, red light never turns to green. Now I am going to buy a new motherboard.
820036368385
TacoNikky said:
If that process didn't work for you, it should be hardbrick. What did you do before you bricked your phone?
---------- Post added at 01:26 PM ---------- Previous post was at 01:20 PM ----------
Hi, I just checked your message again. You flashed a Micromax custom rom to Xperia C. It is hardbricked.
Your preloader and boot is crushed. Your device will never start and pc will never recognize it. If you have warranty, just send your device and they replace the motherboard. If you don't have warranty you need to buy new motherboard.
Same thing happened to me while developing custom rom. I tried everything, red light never turns to green. Now I am going to buy a new motherboard.
Click to expand...
Click to collapse
you might be right bro....i was request to mobile shop for a new motherboard...from my country Malaysia...it cost about RM450-500 LOL
anyway thanks for your suggestion
cbking123 said:
you might be right bro....i was request to mobile shop for a new motherboard...from my country Malaysia...it cost about RM450-500 LOL
anyway thanks for your suggestion
Click to expand...
Click to collapse
If you can't find it in Malaysia, you can buy one from China. It's available on taobao.com and it's price is 350 yuan.
http://item.taobao.com/item.htm?spm=a230r.1.14.5.Uf5QzO&id=37431065583
do that suitable the phone??i see that model does not match with the phone
cbking123 said:
do that suitable the phone??i see that model does not match with the phone
Click to expand...
Click to collapse
S39h and C2305 are the names of Xperia C. I already removed battery and motherboard. I compared my motherboard with the picture, its same. It's suitable for us :good:
thanks
TacoNikky said:
S39h and C2305 are the names of Xperia C. I already removed battery and motherboard. I compared my motherboard with the picture, its same. It's suitable for us :good:
Click to expand...
Click to collapse
oh that's nice,but I still worried about the apps and function of the motherboard will not be same with my country
cbking123 said:
oh that's nice,but I still worried about the apps and function of the motherboard will not be same with my country
Click to expand...
Click to collapse
Just software will be different region. You can flash your region's firmware with WMShua Flash Tool then it will be same
I will buy S39h motherboard from China because nobody sell it in my country. In 20 days motherboard will be delivered to me and I will replace motherboard. If you are not in a rush, wait and i tell you the result
TacoNikky said:
Just software will be different region. You can flash your region's firmware with WMShua Flash Tool then it will be same
I will buy S39h motherboard from China because nobody sell it in my country. In 20 days motherboard will be delivered to me and I will replace motherboard. If you are not in a rush, wait and i tell you the result
Click to expand...
Click to collapse
alright waiting your good news
TacoNikky said:
Just software will be different region. You can flash your region's firmware with WMShua Flash Tool then it will be same
I will buy S39h motherboard from China because nobody sell it in my country. In 20 days motherboard will be delivered to me and I will replace motherboard. If you are not in a rush, wait and i tell you the result
Click to expand...
Click to collapse
can you give me a link for the store that you buy the motherboard couse i cant find nowhere in google
masterismos said:
can you give me a link for the store that you buy the motherboard couse i cant find nowhere in google
Click to expand...
Click to collapse
That's taobao link http://item.taobao.com/item.htm?spm=a230r.1.14.8.eBb323&id=38029571987&ns=1#detail
but taobao just sell it in china.
Website which name is yoybuy.com buy from taobao and ship it to you.
That's yoybuy's link http://www.yoybuy.com/en/show/38029571987/?cate=search
I got my motherboard, replaced it myself and I flashed C2305 firmware. It is same as before, everything works
TacoNikky said:
That's taobao link http://item.taobao.com/item.htm?spm=a230r.1.14.8.eBb323&id=38029571987&ns=1#detail
but taobao just sell it in china.
Website which name is yoybuy.com buy from taobao and ship it to you.
That's yoybuy's link http://www.yoybuy.com/en/show/38029571987/?cate=search
I got my motherboard, replaced it myself and I flashed C2305 firmware. It is same as before, everything works
Click to expand...
Click to collapse
thanks my friend
TacoNikky said:
That's taobao link http://item.taobao.com/item.htm?spm=a230r.1.14.8.eBb323&id=38029571987&ns=1#detail
but taobao just sell it in china.
Website which name is yoybuy.com buy from taobao and ship it to you.
That's yoybuy's link http://www.yoybuy.com/en/show/38029571987/?cate=search
I got my motherboard, replaced it myself and I flashed C2305 firmware. It is same as before, everything works
Click to expand...
Click to collapse
i ordered 2 days a go the motherboard from the link that you gave me. how many days needs to delivered to you. im in greece you think thay need more than 2 weeks for delivery to me?. was the changing of motherboard difficult i mean are alot of cables to unplug or is easy im not so noob a hade change the battery and digitizer for my mini by my self is same easy? and thanks again for the links ebay doesnt have nothing for ou XC.
masterismos said:
i ordered 2 days a go the motherboard from the link that you gave me. how many days needs to delivered to you. im in greece you think thay need more than 2 weeks for delivery to me?. was the changing of motherboard difficult i mean are alot of cables to unplug or is easy im not so noob a hade change the battery and digitizer for my mini by my self is same easy? and thanks again for the links ebay doesnt have nothing for ou XC.
Click to expand...
Click to collapse
Your welcome mate
I live in Turkey, it took 22 days to deliver. Should be similar to Greece.
Changing motherboard is easy as pie. I am sure you do it yourself. I also recorded à video about opening Xperia C and changing motherboard. I will Share it on youtube and Send link to you
cbking123 said:
someone help me to fix this problem very thank you!!!!!
i have doing this http://forum.xda-developers.com/showthread.php?t=2696987 for flash this roms http://forum.xda-developers.com/showthread.php?t=2410616 and before loading all it get SOD and red light wont turn on
someone help fix this problem thanks :crying:
Click to expand...
Click to collapse
Visit this thread :
http://forum.xda-developers.com/sony-xperia-c/general/how-to-install-restore-stock-android-t2832005
Sir did you try octoplus box or jtag box for your bricked xperia c2305???
Related
For those people that didn't get the unlocking code - or don't want to unlock (i can't get the code and don't want to unlock)
NOW : YOU CAN ROOT WITH ONLY ONE CLICK
AND EVEN WITH LOCKED BOOTLOADER
NO factory reset NO Voiding Warranty NO changing stock recovery NO waiting for days to get the code
after days of searching i found this chinese application that root with one click
it's used for unlocking xperia devices even with locked bootloader
i tried many versions of it and only one worked (Download in the bottom )
Tested Devices:
U8950N-51
U8950N-1
U8950-1
i hope it work with other models
REQUIREMENTS :
1: Ensure the device drivers is installed correctly
2: Make sure Usb debuugging is on (Settings > Developer options)
3: Download Eroot from GoogleDrive
ROOTING :
1: Connect your device to the PC using USB cable
2: open Eroot_V1.3.4.exe
Note: If it started to download some thing cancel it by clicking the green button
3: Hit " -root " button
4: wait till the End
Note: if it didn't work for the first time try again - if still go to " C:\user\user account\Appdata\Raoming\ " and delete Eroot Folder
if still not working i don't know :crying:
Finally : it's my first subject encourage me if it worked hit the thanks button and comment with your model
Nice tutorial mate, very easy to follow.
Worked perfectly on my g600 (U8950N-51).
Only had this phone home for 5 minutes and its rooted, gotta love xda.
ajgftw said:
Nice tutorial mate, very easy to follow.
Worked perfectly on my g600 (U8950N-51).
Only had this phone home for 5 minutes and its rooted, gotta love xda.
Click to expand...
Click to collapse
thanks
Added the Device model to the list
thank you works fine on mine U-8950-1,Do you know any custom roms to this phone ?
thanks
snatch2 said:
thank you works fine on mine U-8950-1,Do you know any custom roms to this phone ?
thanks
Click to expand...
Click to collapse
i think there is miui rom for it
but i don't need to instal any custom rom since the emotion ui upgrade will be avilable for G600 soon
theprincemoh said:
i think there is miui rom for it
but i don't need to instal any custom rom since the emotion ui upgrade will be avilable for G600 soon
Click to expand...
Click to collapse
Thanks for the reply
i´m waiting almost one year for custom roms, i found that chinese miui rooms but does anybody test these roms?
where do you see that huawei wil put a software upgrade to this phone?
snatch2 said:
Thanks for the reply
i´m waiting almost one year for custom roms, i found that chinese miui rooms but does anybody test these roms?
where do you see that huawei wil put a software upgrade to this phone?
Click to expand...
Click to collapse
well some tried them ( the most problem is with the bluetooth and overclocking the cpu over 1GHZ )
and the official update will be in one month or two (they really take very long )
How can you get clockworkmod recovery?
Rospat said:
How can you get clockworkmod recovery?
Click to expand...
Click to collapse
i think you have to be unlocked bootloader to install custom recovery
Thanks
Thanks for that ... Worked 100%...http://forum.xda-developers.com/images/icons/icon14.gif
Custom ROM
Please give me a Custom ROM ..... :victory:
---------- Post added at 02:00 PM ---------- Previous post was at 01:56 PM ----------
theprincemoh said:
well some tried them ( the most problem is with the bluetooth and overclocking the cpu over 1GHZ )
and the official update will be in one month or two (they really take very long )
Click to expand...
Click to collapse
Yaar.. Please give me the lInk for Sustom Rom and give details about the Upgrade..
Thanks:fingers-crossed::victory::angel:
mailtomeesubash said:
Please give me a Custom ROM ..... :victory:
---------- Post added at 02:00 PM ---------- Previous post was at 01:56 PM ----------
Yaar.. Please give me the lInk for Sustom Rom and give details about the Upgrade..
Thanks:fingers-crossed::victory::angel:
Click to expand...
Click to collapse
which model do you have? because all the roms is for u8950D and some tried them and said it work with some problems on other models
here you are some roms
http://forum.xda-developers.com/showpost.php?p=45882641&postcount=837
http://forum.xda-developers.com/showpost.php?p=44906085&postcount=823
http://forum.xda-developers.com/showpost.php?p=44835068&postcount=820
http://forum.xda-developers.com/showpost.php?p=43542145&postcount=802
http://forum.xda-developers.com/showpost.php?p=43972787&postcount=806
My HandSet...
theprincemoh said:
which model do you have? because all the roms is for u8950D and some tried them and said it work with some problems on other models
here you are some roms
http://forum.xda-developers.com/showpost.php?p=45882641&postcount=837
http://forum.xda-developers.com/showpost.php?p=44906085&postcount=823
http://forum.xda-developers.com/showpost.php?p=44835068&postcount=820
http://forum.xda-developers.com/showpost.php?p=43542145&postcount=802
http://forum.xda-developers.com/showpost.php?p=43972787&postcount=806
Click to expand...
Click to collapse
My Handset Model is huawei U8950-1
mailtomeesubash said:
My Handset Model is huawei U8950-1
Click to expand...
Click to collapse
have you found a backup and restore Option works on any recovery?
and sorry
the roms for u8950-1 is very limited and i didn't try any of them
hi
Guys i am very gratefull for this thread, but i have a problem rooting works. But i still have sim locked ... what i have to do now to unlock it i need answers as fast as you can `cause the phone is for gift and i need to make it work on other operator.
Thank you in advance!
rollride said:
Guys i am very gratefull for this thread, but i have a problem rooting works. But i still have sim locked ... what i have to do now to unlock it i need answers as fast as you can `cause the phone is for gift and i need to make it work on other operator.
Thank you in advance!
Click to expand...
Click to collapse
I fear it would be very hard for you
since this Phone is almost unknown
so it will be very hard to get the unlock code of the sim
just call the provider or find some one who unlocks huawei phones
but it will cost you about 10$-15$
theprincemoh said:
I fear it would be very hard for you
since this Phone is almost unknown
so it will be very hard to get the unlock code of the sim
just call the provider or find some one who unlocks huawei phones
but it will cost you about 10$-15$
Click to expand...
Click to collapse
Ok thank you for the advice!
:good: That is what i was thinking of... but the provider tax is about 30$ which is pretty high you know! The device model is u8950-1.
rollride said:
Ok thank you for the advice!
:good: That is what i was thinking of... but the provider tax is about 30$ which is pretty high you know! The device model is u8950-1.
Click to expand...
Click to collapse
will
search for one who unlocks huawei phones
or just pay the 30$
theprincemoh said:
will
search for one who unlocks huawei phones
or just pay the 30$
Click to expand...
Click to collapse
don`t worry i am going to find one or just pay the tax thank you for your information...
Hello, thanks for the guide. I'd like to know: did anybody try with the U8950N-1, because in any forum i get to find something this model is not appearing in the ones tested. May it be substantially equivalent to the U8950N-51?
Greetings..
Before all sorry for my bad english, i hope you can understand my problem
Well, i try to flash my cellphone an LG G Flex 2 model H955P whit KDZ from the offical LG Firmwares, before i have "34 TCL/TELCEL(MEXICO) V10A LGH955P" firmware and i make a mistake and i flash with "19 HKG/HONG KONG V10D LGH959" :crying: so my phone never turn on again, had a hard brick, when i connect USB to the PC appears in the device manager of my computer a dispositive name "QHSUSB_BULK", so i wanna know if any one knows how i can bring to life my device, i miss her :crying::crying::crying: hope any one can help me
there is no current solution for this.
Update
Alex_XV6700 said:
there is no current solution for this.
Click to expand...
Click to collapse
Nothing yet?
basstardo said:
Nothing yet?
Click to expand...
Click to collapse
I really wouldnt know my friend I moved on from GF2.
Best of luck :good:
Alex_XV6700 said:
I really wouldnt know my friend I moved on from GF2.
Best of luck :good:
Click to expand...
Click to collapse
Thaks bro, i hope anyone find the solution to this problem
basstardo said:
Thaks bro, i hope anyone find the solution to this problem
Click to expand...
Click to collapse
Fill out warranty with LG and they'll fix it.
Hi guys i bought a huawei phone which i discovered that the firmware installed on it belong to another model
so my phone model is mt7-tl10 and the firmware model is mt7-l09 and this has formed a problem for my phone
as it has become so crazy where it becomes once the keyboard is closed and once opens on its own
and this happens in in different times
i tried to flash it with EFT dongle using the OTA update but there is no changing like i didn't anything
also i tried to fla**** with the buttons but it failed to continue the installation so plz if there any solution
to my problem don't hesitate to help me with the right fix and thnx for all...
hey guys !!?
Heeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeelp for christ's sake !!!
DarkCancer said:
hey guys !!?
Heeeeeeeeeeeeeeeeeeeeeeeeeeeeeeeelp for christ's sake !!!
Click to expand...
Click to collapse
Your best bet is DC Unlocker.
erayrafet said:
Your best bet is DC Unlocker.
Click to expand...
Click to collapse
that's what i discovered too lately but unfortuantly i don't have such service like this to solve the problem
DarkCancer said:
that's what i discovered too lately but unfortuantly i don't have such service like this to solve the problem
Click to expand...
Click to collapse
It is a paid software for phone repairs.
https://www.dc-unlocker.com
erayrafet said:
It is a paid software for phone repairs.
https://www.dc-unlocker.com
Click to expand...
Click to collapse
how many credit do i need to solve my problem with it ?
DarkCancer said:
how many credit do i need to solve my problem with it ?
Click to expand...
Click to collapse
I think 4. Check option 21.
https://www.dc-unlocker.com/buy/user_prices
I recently bought the Airtel 4G Hotspot which is Huawei E5573cs-609 with firmware version 21.329.63.00.284.
I've tried lots of online instructions but I am stuck at the Balong USB Loader showing this output.
Ïûòàåìñÿ îòêðûòü óñòðîéñòâî \\.\COM6 ...
Çàãðóçêà áëîêà 0, àäðåñ=10000000, ðàçìåð=3936
Âñåãî ïàêåòîâ â áëîêå [0]: 4
Ìîäåì îòâåðã ïàêåò êîíöà äàííûõ. Îáðàç ïàêåòà:
0000: ED 05 FA 53 C0 *í.úSÀ
I even tried AT^GODLOAD and flashing via a file provided by another user, but it just bricked my device. Now am stuck at the 3G PC UI Interface loader.
Is there anyone managed to unlock this device? Also someone told me that because of the new firmware version, the previous Balong usb loader bin files aren't supported, that's why it shows the above message.
Can someone provide the latest USB loader for the device for that firmware version?
Or if it's possible to switch to download mode from the 3G PC UI Interface mode? At least I could flash the original firmware if it's possible.
Can you explain what you did so it get brick?
---------- Post added at 03:59 PM ---------- Previous post was at 03:57 PM ----------
shihabsoft said:
I recently bought the Airtel 4G Hotspot which is Huawei E5573cs-609 with firmware version 21.329.63.00.284.
I've tried lots of online instructions but I am stuck at the Balong USB Loader showing this output.
Ïûò
Click to expand...
Click to collapse
@NetsKing
As mentioned earlier I flashed a custom firmware provided by a reputed developer at GSMhost. Turns out everyone who flashed that file got their device soft bricked.
I am providing the link as reference.
http://forum.gsmhosting.com/vbb/f695/e5573cs-609-possible-unlock-2481968/
Warning - DO NOT FLASH THE FILE PROVIDED THERE IT MAY BRICK YOUR DEVICE.
shihabsoft said:
@NetsKing
As mentioned earlier I flashed a custom firmware provided by a reputed developer at GSMhost. Turns out everyone who flashed that file got their device soft bricked.
I am providing the link as reference.
http://forum.gsmhosting.com/vbb/f695/e5573cs-609-possible-unlock-2481968/
Warning - DO NOT FLASH THE FILE PROVIDED THERE IT MAY BRICK YOUR DEVICE.
Click to expand...
Click to collapse
Dic you flash this file ?
Same here it's bricked, stuck at 3G PC UI interface.
Researched everywhere I guess till now there is no USB Loader to work with this version. Only paid tools can work with it, anyway let me know if you ever manage to come out of test point mode.
NetsKing said:
Dic you flash this file ?
Click to expand...
Click to collapse
Yes, do not flash that
tanveer2u said:
Researched everywhere I guess till now there is no USB Loader to work with this version. Only paid tools can work with it, anyway let me know if you ever manage to come out of test point mode.
Click to expand...
Click to collapse
Yup, bought it for this purpose, but came to know it's not possible. Packed it and threw it under the table. Let's hope for Huawei to release the usb loader for this firmware version
shihabsoft said:
Yes, do not flash that
Click to expand...
Click to collapse
I also once flashed this file n my device got brick , i think they're doing this intentionally so once you meesed it up n next time you won't try free solutions n unfortunately you'll have to pay them n they will unlock it remotely ! It's a racket !
Any progress guys on this.. please post here I need help to unlock this device..
NetsKing said:
I also once flashed this file n my device got brick , i think they're doing this intentionally so once you meesed it up n next time you won't try free solutions n unfortunately you'll have to pay them n they will unlock it remotely ! It's a racket !
Click to expand...
Click to collapse
Not sure about their intentions. But they can't do remote unlock. You've to send them the device and pay 350 rs or else buy the expensive Mkey dongle and flash
shihabsoft said:
Not sure about their intentions. But they can't do remote unlock. You've to send them the device and pay 350 rs or else buy the expensive Mkey dongle and flash
Click to expand...
Click to collapse
Yes they can unlock remotely , that's how my device got unlock via anydesk(TeamViewer Alternate) software !
NetsKing said:
Yes they can unlock remotely , that's how my device got unlock via anydesk(TeamViewer Alternate) software !
Click to expand...
Click to collapse
That's interesting. Who did it, could you pls share his details?
When I contacted balwinder the dev who provided that unlock file, he asked me to send the device to him
shihabsoft said:
That's interesting. Who did it, could you pls share his details?
When I contacted balwinder the dev who provided that unlock file, he asked me to send the device to him
Click to expand...
Click to collapse
WhatsApp him +91 93499 81605
Airtel e5573cs-609 21.329.63.00.284 unlock
i found guy who made this file
he is ak singh. no1 fraud guy. he made faulty file and upload in gsmforum. people have proof this doing by ak singh
---------- Post added at 03:55 AM ---------- Previous post was at 03:52 AM ----------
NetsKing said:
WhatsApp him +91 93499 81605
Click to expand...
Click to collapse
i contact balwinder he unloced my modem remotely in only 2 min. and after unlock all sim work
this is not a whatspp of balwinder +91 93499 81605
balwinder contact no of whatsapp only is
+919646599249
he is genuine reputed devolper in worldwide
manikk sharma said:
i found guy who made this file
he is ak singh. no1 fraud guy. he made faulty file and upload in gsmforum. people have proof this doing by ak singh
---------- Post added at 03:55 AM ---------- Previous post was at 03:52 AM ----------
i contact balwinder he unloced my modem remotely in only 2 min. and after unlock all sim work
this is not a whatspp of balwinder +91 93499 81605
balwinder contact no of whatsapp only is
+919646599249
he is genuine reputed devolper in worldwide
Click to expand...
Click to collapse
I know about Balwinder but as he said Balwinder is not willing to do remotely that's why i have given him another person who unlocks remotely (unlockiofficial)
NetsKing said:
I know about Balwinder but as he said Balwinder is not willing to do remotely that's why i have given him another person who unlocks remotely (unlockiofficial)
Click to expand...
Click to collapse
(unlockiofficial is a guy of balwinder. he bought solution from balwinder
and do unlock remotely
(unlockiofficial is a balwinder perosn . balwinder have no time for modems unlcok remotely
so (unlockiofficial take solution form balwinder and unlock modems remotely
manikk sharma said:
(unlockiofficial is a guy of balwinder. he bought solution from balwinder
and do unlock remotely
(unlockiofficial is a balwinder perosn . balwinder have no time for modems unlcok remotely
so (unlockiofficial take solution form balwinder and unlock modems remotely
Click to expand...
Click to collapse
NetsKing said:
I know about Balwinder but as he said Balwinder is not willing to do remotely that's why i have given him another person who unlocks remotely (unlockiofficial)
Click to expand...
Click to collapse
Neither of them could fix my device
shihabsoft said:
Neither of them could fix my device
Click to expand...
Click to collapse
Hmmm a dead device can't be fixed remotely that's a messy process !
Huawei E5573-609 21.329 unlock solution here tested
Huawei E5573-609 21.329 unlock solution here tested
Hi dear i am already unlocking this device with this 21.329 version without open any screws of device , so there are two ways to unlock
one way is that you can visit at my shop, at Amritsar, punjab and its unlock charges are Rs. 300/- only per device
Second way is i can do remotely also , it will also cost at Rs. 300/- only
And third way is that you can buy software solution of this version - Can contact me on my Whatsapp number 9878025129 or can call on 7307909000
pawansmartshop said:
Huawei E5573-609 21.329 unlock solution here tested
Hi dear i am already unlocking this device with this 21.329 version without open any screws of device , so there are two ways to unlock
one way is that you can visit at my shop, at Amritsar, punjab and its unlock charges are Rs. 300/- only per device
Second way is i can do remotely also , it will also cost at Rs. 300/- only
And third way is that you can buy software solution of this version - Can contact me on my Whatsapp number 9878025129 or can call on 7307909000
Click to expand...
Click to collapse
balwinder fixed my dead modem e5573cs-609 21.329.63.00.284 by remotely , which brick by wrong file. he charge 650rs for brick repair. but he says he cant sell brick solution anyone, only he have brick solution. he is very reputated devolper in worldwide
This tool can help you to unbrick the Red Magic 3. It will restore the phone to the oldest version, you need to update the system software by yourself. This tool is based on Qualcomm firehose protocol, so it should fix all kinds of software issue.
ALL DATA ON YOUR PHONE WILL BE LOST
If the tool have any problem, please send me a pm or reply down below.
Hope this tool can help people with bircked device, sorry for my poor English
Download Here:
Non-EU Version
EU Version For Europe Only
Really glad to know this exists before i buy the device. Is this expected to recover from any situation?
So who wants to brick their device to test this tool?
Thank you so much for the tool. really helps to make the decision to buy this phone. So will this recover from any kind of brick like even without need of short points in extreme cases?
Wow. I bricked my red magic 3 over 4 months ago by flashing the wrong TWRP. I will try your tool an let you know if I can get my cellphone to work.
Even a cellphone repair shop could not repair the damage I caused.
Fingers crossed ?
---------- Post added at 07:26 AM ---------- Previous post was at 07:23 AM ----------
crusnikmachine said:
Really glad to know this exists before i buy the device. Is this expected to recover from any situation?
So who wants to brick their device to test this tool?
Click to expand...
Click to collapse
Um I pretty much have your wish covered lol. My phone has been unused by my bed over 120 days now.
Will post if it makes my cell come to life?
iamROX said:
Thank you so much for the tool. really helps to make the decision to buy this phone. So will this recover from any kind of brick like even without need of short points in extreme cases?
Click to expand...
Click to collapse
You don't need to short any wire or test point in order to boot into 9008 mode. But you can still do that if you completely bricked your phone.
Bryceicle1971 said:
Wow. I bricked my red magic 3 over 4 months ago by flashing the wrong TWRP. I will try your tool an let you know if I can get my cellphone to work.
Even a cellphone repair shop could not repair the damage I caused.
Fingers crossed ?
---------- Post added at 07:26 AM ---------- Previous post was at 07:23 AM ----------
Um I pretty much have your wish covered lol. My phone has been unused by my bed over 120 days now.
Will post if it makes my cell come to life?
Click to expand...
Click to collapse
You can give it a try. :silly:
Mate I want to give money to the developer of this unbricking tool. Thank you so much for helping me in less than 4 minutes completely fix my Nubia Red Magic 3.
Now I am not the guy who destroyed a $1100.00 New Zealand dollars phone anymore.
As promised I'm sticking with my Xiaomi Mi9 and my partner has the very scary awesome Red Magic 3 cellphone.
Here is a picture of her syncing her Google account an transferring her data from her 2016 Xiaomi Mi Note 2 to her completely functioning 2019 Red Magic 3.
Please let me know how I can pay you for helping me fix this cellphone that was bricked for 4 months.
And thank you ever so much
Transferring all her data an apps ?
Bryceicle1971 said:
Mate I want to give money to the developer of this unbricking tool. Thank you so much for helping me in less than 4 minutes completely fix my Nubia Red Magic 3.
Now I am not the guy who destroyed a $1100.00 New Zealand dollars phone anymore.
As promised I'm sticking with my Xiaomi Mi9 and my partner has the very scary awesome Red Magic 3 cellphone.
Here is a picture of her syncing her Google account an transferring her data from her 2016 Xiaomi Mi Note 2 to her completely functioning 2019 Red Magic 3.
Please let me know how I can pay you for helping me fix this cellphone that was bricked for 4 months.
And thank you ever so much
Click to expand...
Click to collapse
I made this tool. So you are welcome.
RM3S
JerryYin said:
I made this tool. So you are welcome.
Click to expand...
Click to collapse
Jerry do you think this tool will function with the red magic 3S also?
Hi Jerry, I have RedMagic 3 China but flash EU version, I have to use which version, EU or non EU?
crusnikmachine said:
Jerry do you think this tool will function with the red magic 3S also?
Click to expand...
Click to collapse
The tool it self? Yes it will, The OS won't.
Warlord_Link said:
Hi Jerry, I have RedMagic 3 China but flash EU version, I have to use which version, EU or non EU?
Click to expand...
Click to collapse
You should use the EU version.
Bricked badly!
I installed the cn rom on my gb rom through OTG update and wish to have the gapps so installed twrp for cn rom! And while installing gapps from twrp i wiped the system partition too in the wipe option of twrp! And now my phone is stuck with no recovery and no OS!
I tried every other method to flash .img files from fastboot, they do get flashed with OKAY! but nothing happens it stays in fastboot mode only!
Will this unbricking tool will help me? :crying: :crying:
How to use tool?
zabardazt said:
i installed the cn rom on my gb rom through otg update and wish to have the gapps so installed twrp for cn rom! And while installing gapps from twrp i wiped the system partition too in the wipe option of twrp! And now my phone is stuck with no recovery and no os!
I tried every other method to flash .img files from fastboot, they do get flashed with okay! But nothing happens it stays in fastboot mode only!
Will this unbricking tool will help me? :crying: :crying:
Click to expand...
Click to collapse
yes it will
hoichemgio9x said:
How to use tool?
Click to expand...
Click to collapse
Follow the guide in attachment
any diffrent?
JerryYin said:
You should use the EU version.
Click to expand...
Click to collapse
any diffrent if wrongly use ? not working if wrongly use?
fuhamst86e said:
any diffrent if wrongly use ? not working if wrongly use?
Click to expand...
Click to collapse
I don't recommend to use EU version if you are not loacted in EU
oh no
JerryYin said:
I don't recommend to use EU version if you are not loacted in EU
Click to expand...
Click to collapse
i using eu version ... oh no.. now see what happen..if cant not use.. can also flash back non eu right?