I've been running Jans ported GPE rom on my work I9505.
I chose it as it is so close to stock I could remove root after install to use company email.
However it could be a little more stable. RR's and FC's are taking their toll.
I tried using ART and that bricked the phone so I reinstalled fresh.
Just now I thought I was going through another RR when I was in a hurry to open a page in Chrome and it will no longer boot, just the coloured circles over and over.
Can someone recommend another Rom that's very stock KK that would be ok to run with the phone not rooted?
I am guessing that the more custom Roms would need root access due to the higher functions they support.
Thanks
Vic
These are the forums for the SGH-T959V, a phone that had its last OEM ROM from Gingerbread. You probably want a different section of XDA.
---
Posted from whatever phone booted today
Ha ha, you're right. I read it as Galaxy S4 4G. I will try again.
Related
I had browsed this forum for awhile and was having major issues with AT&T because my phone, as it sat in the eyes of ATT, decided that I needed to be on towers in another county which completely rendered reaching me by land line impossible and my service was such garbage, that I went through five phone numbers in as many phones. My iPhone 4 was screwed, I got a 1st run Nokia Lumina Windows Phone, but the case and windows 8 killed it for me (you had antennae right where you'd normally rest your fingers and so talking on it was a chore. I decided to get another iphone, and another, all met with failure. I stumbled onto these forums one day and discovered the word "root." My iphone was again giving me trouble and my wifes android seemed to do more....way more.
So I'm on my way home with my first android- a cheap motorola atrix HD. When they finally fixed my tower issue I was on my fifth number and I had read on these forums about root. So I get home around Christmas, and promptly rooted my atrix without knowing anything and figured I would learn as I went. I used the motochopper root by djrbliss and Dan Rosenthal (I think) with the fix bootloader screen. I figured I would learn half assed and learn as I go. I download TIBU, and proceeded to brick my phone. I got verification at customer care that the atrix may have been modified, and if it wasnt defective, swap it at the store.
TIBU Brick
Ran on 70 apps total. Removed the wrong one, Brick.
Rooted and botched something stupid, BRICK.
Tried to flash Cyanogenmod. Brick.
Flashed Cyanogenmod and thought I didn't do it right: Grew Frustrated and formatted the phone. ( I was getting as many replacements as I wanted and my wife continued to get irritated with my new hobby which she still hates.
Take my hard bricked HD to ATT store just to find out that I am eligible for the next program.
I shied away from rooting, Got rid of the mega and then got a Galaxy S4. That fever came right back and the next thing I know I am reading, retaining and absorbing as I bricked my S4 four times- twice by not paying attention and twice by not understanding safestrap recovery. The fever of modding finnally got me off of my rear when the guy at best buy reflashed my s4 for the second time and told me about RSD Lite. I go, download RSD Lite, Install my motorola drivers, Install my Operating System via sideload, download CWM recovery, flash CM 10x.x and forget my gapps...no worries, as I had discovered goo.im and f-droid and a few other places where I just found the correct jb gapps moving up from ICS obviously. I then hard brick the Atrix HD and I reinstalled my OS, got the anysoft keyboard from f-droid (the motorola keyboard kept dying) and I flash CM 10 and the JB gapps and bam, I feel like i'm no longer a noob. I was gone for a few months when I did all of this and as soon as I got home, I bought my brothers note 2 which I promptly rooted using cf autoroot and odin and then I flashed the Pacman Rom Stable 4.3. I experienced a soft brick moving up to kit-kat and unstable nightlies of Pacrom, but I moved everything to my SD card and rom installer still had my 4.3 gapps, and stable 4.3 pac rom. I was short on money and had to get a loan on the note 2 which I m getting back.
Now, I'm staring at my S4 for weeks...thinking "god I hate this stupid thing because it has no root on NC1.
Finally, yesterday, I found the towelroot apk and I rooted my i337 NC1. I set up the phone in a few moments, hooked up the proper wanam modules, and I tried with no success to put CWM Philz touch recovery. I was almost resigned to just using the apex launcher but I couldn't stay away from pushing myself to the limit and finally installing safestrap and a touchwhiz rom. So tonight, I finally installed safestrap after reading the steps to get version 3.72 running. Now I was trying to find a compatible touchwhiz based rom that suited me because I finally safestrapped my s4 and ran a backup to my SD, followed by a full wipe (excluding the SD card) and I went right here to read more (on NC1 get the new ODEXED version and I flashed fine without odin, and not rebooting into DL mode, and am now running the Venom v3.02 Safe Strap rom on my S4 like a boss.
Now for the clincher if you're still reading...I don't even know linux, let alone how to use a terminal emulator but for some strange reason, I now know what to do and what not to do to brick a device, and most importantly of all,
super noobs take note:
I FOLLOW THE DIRECTIONS EXACTLY.
I know little to nothing regarding the finer workings of phones (I now know better than to try to mess with things I know nothing about) but I paid attention.
And the payoff is being able to do this to almost any device...but now I am going to read up more because I want to build a nasty rom that gives the user so much access that it borders on criminally sick.
In short, the moral is to PAY ATTENTION. KNOW YOUR LIMITATIONS. FOLLOW INSTRUCTIONS.
Shout out here:
http://forum.xda-developers.com/showthread.php?t=2447482
And Here:
http://forum.xda-developers.com/showthread.php?t=2447482&page=109
Mad props for the simple instruction. I'm gonna go play with my.....new touchwhiz ROM on my S4.
Hello XDA!
I have some questions about my n8010. It is a tablet that I bought in Greece, in case that is necessary to know, and has an interesting background. It started late May. The tablet was unrooted and without any mods whatsoever. I was running the latest Jelly Bean update and had A TON of lag. I had replaced TouchWiz Launcher with Nova and a different gallery and music app with still a lot of lag. So I decided to flash CM11 since it would be lighter for the tablet. After some research I followed the root guide from Zedomax and everything was fine. I had root and so I proceeded doing a backup. This where everything got weird. The backup started but was stuck for long periods of time. After some time being stuck in a screen I decided I should force restart. After the Galaxy Note 10.1 logo appeared it just hanged there without booting into Jelly Bean. I checked recovery and download mode and they where all working fine so I flashed TWRP. It worked and so I took a backup and proceeded installing CM11. I had it already in my SD. I had followed the instructions in the XDA thread that said about removing a line to make it work on the n8010. The flash went great and after factory resetting I rebooted the tablet and everything was OK. At the first boot WiFi wouldn't work but after a reboot it was. The only thing that wasn't working was the video recording. It is a deal-breaker as I use it a lot. I had to switch ROMs. I tried CM10.2 and it still wouldn't. Same goes for Revolt. At lat I switched to a TouchWiz based ROM. Specifically Hyperdrive RLS8. Video was working so I stayed there. I was noticing that since I flashed CM11 my tablet showed up as an n8013 which was very weird but since these ROMs where designed for the n8013 I thought it was normal.
One ROM also had the front facing camera able to record. Upon further inspection I found that Download Mode had my tablet as an n8010 but with the flash count 0 and the status official! Now, I'm either super lucky or the completely opposite! It also says official under About Device! Fast forward a few months and I am now in a situation where the tablet lags once again like crazy. I uninstalled a couple of apps and also installed lighter alternatives and it's somewhat bearable. I was reading the Official OmniROM thread and saw that others also had issues, most of which had the new KitKat bootloader that I don't have, with YouTube and the Video Recording. The latest nightlies are said to have a fix. So I am thinking of installing OmniROM since I am lagging a lot and I would like Screen Mirroring to the Chromecast. My only concern is that I will either brick the tablet or the camcorder won't work. Many people have bricked their Notes and can't go back without the Samsung Service. Most have the new KitKat bootloader which I don't and I'm happy about. My tablet is in a weird situation, what should I do? Anybody else experiencing these issues? Any advice is appreciated!
Thanks in advance,
Chris
Edit: Forgot to say that I flashed Carbon ROM in September and I got a status 7 while flashing with PhilzCWM that I had installed in order to flash Hyperdrive. I had to flash back to Hyperdrive as it wouldn't boot after the status 7. It probably happened because it didn't have SE Linux support. If I do anything I'll flash the latest TWRP.
chrismin13 said:
Hello XDA!
I have some questions about my n8010. It is a tablet that I bought in Greece, in case that is necessary to know, and has an interesting background. It started late May. The tablet was unrooted and without any mods whatsoever. I was running the latest Jelly Bean update and had A TON of lag. I had replaced TouchWiz Launcher with Nova and a different gallery and music app with still a lot of lag. So I decided to flash CM11 since it would be lighter for the tablet. After some research I followed the root guide from Zedomax and everything was fine. I had root and so I proceeded doing a backup. This where everything got weird. The backup started but was stuck for long periods of time. After some time being stuck in a screen I decided I should force restart. After the Galaxy Note 10.1 logo appeared it just hanged there without booting into Jelly Bean. I checked recovery and download mode and they where all working fine so I flashed TWRP. It worked and so I took a backup and proceeded installing CM11. I had it already in my SD. I had followed the instructions in the XDA thread that said about removing a line to make it work on the n8010. The flash went great and after factory resetting I rebooted the tablet and everything was OK. At the first boot WiFi wouldn't work but after a reboot it was. The only thing that wasn't working was the video recording. It is a deal-breaker as I use it a lot. I had to switch ROMs. I tried CM10.2 and it still wouldn't. Same goes for Revolt. At lat I switched to a TouchWiz based ROM. Specifically Hyperdrive RLS8. Video was working so I stayed there. I was noticing that since I flashed CM11 my tablet showed up as an n8013 which was very weird but since these ROMs where designed for the n8013 I thought it was normal.
One ROM also had the front facing camera able to record. Upon further inspection I found that Download Mode had my tablet as an n8010 but with the flash count 0 and the status official! Now, I'm either super lucky or the completely opposite! It also says official under About Device! Fast forward a few months and I am now in a situation where the tablet lags once again like crazy. I uninstalled a couple of apps and also installed lighter alternatives and it's somewhat bearable. I was reading the Official OmniROM thread and saw that others also had issues, most of which had the new KitKat bootloader that I don't have, with YouTube and the Video Recording. The latest nightlies are said to have a fix. So I am thinking of installing OmniROM since I am lagging a lot and I would like Screen Mirroring to the Chromecast. My only concern is that I will either brick the tablet or the camcorder won't work. Many people have bricked their Notes and can't go back without the Samsung Service. Most have the new KitKat bootloader which I don't and I'm happy about. My tablet is in a weird situation, what should I do? Anybody else experiencing these issues? Any advice is appreciated!
Thanks in advance,
Chris
Edit: Forgot to say that I flashed Carbon ROM in September and I got a status 7 while flashing with PhilzCWM that I had installed in order to flash Hyperdrive. I had to flash back to Hyperdrive as it wouldn't boot after the status 7. It probably happened because it didn't have SE Linux support. If I do anything I'll flash the latest TWRP.
Click to expand...
Click to collapse
I would have fixed the original lag issues first. I would get it back to factory stock 100 percent, once back to factory I would do A factory reset and start all over. Get the system running stock as it should then reinstall apps one at a time. if it can't run stock for whatever reason other roms not going to fix the problem.
at least with factory stock you know what should be working. Instead of guessing if the problem is part of the new ROM
shaun298 said:
I would have fixed the original lag issues first. I would get it back to factory stock 100 percent, once back to factory I would do A factory reset and start all over. Get the system running stock as it should then reinstall apps one at a time. if it can't run stock for whatever reason other roms not going to fix the problem.
at least with factory stock you know what should be working. Instead of guessing if the problem is part of the new ROM
Click to expand...
Click to collapse
Thanks for the response!
Good idea! I was thinking of going back to stock and repeating everything. It should fix all my issues. It's too bad that I don't have a working stock backup and I will have to flash through Odin. The reason that I am not doing this is because I am afraid of making it even worse from the official status state that I have in Download Mode and my device is an n8013 under About Device. A flash back to stock through Odin would probably flash most of the system parts which would be kinda dangerous. But on the other hand that would mean that I could give it a brand new try with better luck possibly! It's not that TouchWiz ROMs don't work, it's AOSP that doesn't. I played a lot with Hyperdrive and seems like it's doing better from the lag prospective. But that's only gonna last 15 days. I am sure! So, I'll have your response in mind! Might try it out when I have some free time. Unfortunately, that will probably be Christmas.
Thanks,
Chris
Going back to stock is good advice.Should certainly fix the video problem which you said was important.
Phil789 said:
Going back to stock is good advice.Should certainly fix the video problem which you said was important.
Click to expand...
Click to collapse
I don't have any video playback issues. It's just the camcorder that doesn't work in AOSP ROMs.
Yes.My use of the word "video" should have been "video recording".
The time has come!
Hello everyone, happy holidays!
The time has come that I follow your instructions. I've done my research and here's how I'll do it. Do you agree? Do you have any other suggestions?
Take full backups with my current configuration (Hyperdrive RLS8, PhilzCWM)
Factory reset the device and clean it up so that there is a lot of space
Install Samsung Drivers
Flash Stock Greek 4.1.2 Frimware (N8010XXUCMK2_N8010OXXCMK2_HOME.tar.md5) through ODIN v3 1.85
Let it boot up and do a factory reset from stock recovery
Flash TWRP 2.8.1.0 for the GT-N8010 (openrecovery-twrp-2.8.1.0-gt-n8010) (I chose this version since it has the most downloads)
Make a full backup once again
Flash Omni ROM 4.4.4 (omni-4.4.4-20141222-n801x-NIGHTLY)
Flash SuperSU (UPDATE-SuperSU-v2.40)
Flash PA GApps (pa_gapps-modular-mini-4.4.4-20141214-signed.zip)
Factory reset
REBOOT!
Check everything (Video, model, download mode, bugs, etc.)
REPORT!
If everything goes correctly I believe I should be OK! Hope my issues will be over since the tablet is slow once again. Kinda scared, so that's why I'm asking you. Will I be (mostly) brick safe? Hope so!
Thank you very much for your support,
Chris
P.S.: Should I root before leaving stock? I mean through TWRP.
chrismin13 said:
Hello everyone, happy holidays!
The time has come that I follow your instructions. I've done my research and here's how I'll do it. Do you agree? Do you have any other suggestions?
Take full backups with my current configuration (Hyperdrive RLS8, PhilzCWM)
Factory reset the device and clean it up so that there is a lot of space
Install Samsung Drivers
Flash Stock Greek 4.1.2 Frimware (N8010XXUCMK2_N8010OXXCMK2_HOME.tar.md5) through ODIN v3 1.85
Let it boot up and do a factory reset from stock recovery
Flash TWRP 2.8.1.0 for the GT-N8010 (openrecovery-twrp-2.8.1.0-gt-n8010) (I chose this version since it has the most downloads)
Make a full backup once again
Flash Omni ROM 4.4.4 (omni-4.4.4-20141222-n801x-NIGHTLY)
Flash SuperSU (UPDATE-SuperSU-v2.40)
Flash PA GApps (pa_gapps-modular-mini-4.4.4-20141214-signed.zip)
Factory reset
REBOOT!
Check everything (Video, model, download mode, bugs, etc.)
REPORT!
If everything goes correctly I believe I should be OK! Hope my issues will be over since the tablet is slow once again. Kinda scared, so that's why I'm asking you. Will I be (mostly) brick safe? Hope so!
Thank you very much for your support,
Chris
P.S.: Should I root before leaving stock? I mean through TWRP.
Click to expand...
Click to collapse
I did it! It worked. Everything went OK but:
- Flash count is 0 and status official
- Back camera records in slow-mo
- Chromecast mirroring does not work
However:
-My device is an N8010
-I use the front camera instead
-Mirroring was not really needed
-LAG IS HISTORY!!! [emoji50] [emoji2] [emoji2] [emoji2]
I am so impressed by the performance, still doesn't best my nexus 4 with KK 4.4.4 but it's a GIGANTIC IMPROVEMENT! Veeery happy! Thank you for your support, I wouldn't be here without you!
Merry Christmas and happy holidays!
Chris.[emoji2]
Spent the last few weeks trying to get a rom with black backgrounds on my I9505 that still has full camera functionality. Installed slimkat which was fine but the camera barely worked at all so decided to go back to stock 4.4.2 which is where my problems started. Upon doing this I got a message saying I might loose root and did I want to fix it, I said yes and from that time on I have never been able to instal another 4.4.2 system. I am however able to instal stock lollipop.
I suspect this is a knox issue and I have tripped the counter but I have no idea what I could try next as the graviton rom (4.4.2) seems to be my best option for a black background rom still with touchwiz camera stuff. I also find every custom recovery I instal gets over ridden back to the stock recovery and Im constantly reinstalling them.
This is truly driving me around the bend, Could someone point me in the right direction on what the problem is please?
Hi, thank you for using XDA Assist. The Samsung devices usually have qfuses which get "blown" when updating to the latest firmware. This prevents you from downgrading the firmware to earlier versions. I would suggest you follow this to flash the stock firmware in Odin and start over. http://forum.xda-developers.com/showthread.php?p=41072377 You'll have to reinstall your custom recovery, however, you should still be able to flash 4.4.2 custom roms.
Sent from my Nexus 9 using XDA Free mobile app
Thread closed.
im in need of help deodexing. i used the universal deodexer and didnt get proper start up. it became stuck on verizon logo. i reflashed the firmware so its like new again. question is how to properly deodex the stock rom so i can theme status icons? maybe some zip file that i can use in safestrap to make things easier. oh im using verizon prepaid galaxy s3 which is i535PP. any help is appreciated
bjf189 said:
im in need of help deodexing. i used the universal deodexer and didnt get proper start up. it became stuck on verizon logo. i reflashed the firmware so its like new again. question is how to properly deodex the stock rom so i can theme status icons? maybe some zip file that i can use in safestrap to make things easier. oh im using verizon prepaid galaxy s3 which is i535PP. any help is appreciated
Click to expand...
Click to collapse
If root can even be obtained this might be an option, otherwise your probably out of luck
Sent from my Nexus 5
Root has been obtained @ShapesBlue
Nobody has created a ROM for i535PP users yet(the i535 roms run but no wifi/data). And you're correct about having to use safestrap to flash it.If you're comfortable with a bash terminal you can try using one of the various tools found around here to modify the stock rom. If you're not then I'll see what I can do this weekend and try to get something for us i535pp users (after a day or so of testing)
ShapesBlue said:
If root can even be obtained this might be an option, otherwise your probably out of luck
Sent from my Nexus 5
Click to expand...
Click to collapse
Ok, there wasn't really a need to mention me in this thread. Everytime someone does that I get an email. And just because root has been obtained doesn't mean you can flash roms via safestrap
Sent from my Nexus 5
ShapesBlue said:
Ok, there wasn't really a need to mention me in this thread. Everytime someone does that I get an email. And just because root has been obtained doesn't mean you can flash roms via safestrap
Sent from my Nexus 5
Click to expand...
Click to collapse
Flashing via safestrap appears to work fine on my i535pp. The only issue I ran into was wifi not working with roms meant for the i535. And sorry for you having to receive an email for that.
OpenSourcererSweg said:
Flashing via safestrap appears to work fine on my i535pp. The only issue I ran into was wifi not working with roms meant for the i535. And sorry for you having to receive an email for that.
Click to expand...
Click to collapse
Its cool. Good to see safestrap works on the prepaid version also
Sent from my Nexus 5
I'm not sure what a bash terminal is unless it's the same thing as the terminal emulator. I tried using that rom that's called paulpizz or something like that. I used some other rom to. The paulpizz one always failed to install even after downloading it a third time. The other one i can't remember the name but it installed but wouldn't start at all. It would just go black and bootloop and goes into stock recovery for some reason. I came across the nf5 module when i found that paulpizz rom on the goo server they hosted it on. So i got the module and i figured if i were to flash the module over the i535 rom that it would fix the wifi an data problem but never got an answer because it always failed to start up properly and would just bootloop into stock recovery. Ugh Verizon is making things so difficult with modding lol. As of now I'm just using xposed to get at least some theming in and tweaks. I couldn't get any deodex program to work. Whenever i used the deodex files and pushed them to the system of apps and framework, it would restart and just stick on the Verizon logo. So i had to flash the firmware to fix the problem.
When i was on 4.3 with this phone safestrap worked and i got the wifi and data sim error. Now that i got it replaced I'm running the kernel of July 22 2014. Everyone was saying I'm out of luck but i came across kingroot and got the most recent version and it worked. I have root. Installed safestrap for 4.4 and it runs fine but can't get any custom roms to boot. I only managed to find one 4.4 touchwiz rom unfortunately
OpenSourcererSweg said:
Root has been obtained @ShapesBlue
Nobody has created a ROM for i535PP users yet(the i535 roms run but no wifi/data). And you're correct about having to use safestrap to flash it.If you're comfortable with a bash terminal you can try using one of the various tools found around here to modify the stock rom. If you're not then I'll see what I can do this weekend and try to get something for us i535pp users (after a day or so of testing)
Click to expand...
Click to collapse
OpenSourcererSweg said:
Flashing via safestrap appears to work fine on my i535pp. The only issue I ran into was wifi not working with roms meant for the i535. And sorry for you having to receive an email for that.
Click to expand...
Click to collapse
Can you tell me what rom you have successfully flashed with safestrap? I would like to test something
bjf189 said:
Can you tell me what rom you have successfully flashed with safestrap? I would like to test something
Click to expand...
Click to collapse
http://forum.xda-developers.com/gal...iterom-v1-0-i535vrudne1-t2805797/post53919312
If you're going to try flashing an i535 rom and then the i535pp modules let me know how that goes, can't test as I won't be able to do anything till the weekend. If that's the case then there's no need for roms for the pre paid version. Cyanogenmod was also bootable but very buggy.
OpenSourcererSweg said:
http://forum.xda-developers.com/gal...iterom-v1-0-i535vrudne1-t2805797/post53919312
If you're going to try flashing an i535 rom and then the i535pp modules let me know how that goes, can't test as I won't be able to do anything till the weekend. If that's the case then there's no need for roms for the pre paid version. Cyanogenmod was also bootable but very buggy.
Click to expand...
Click to collapse
I'll let you know how it goes and thank you. How is it that you were able to boot CM? From my understanding being that the bootloader is locked and has Knox for extra security to make the unlocking like impossible. But a genius came up with safestrap so we are able to use some custom roms but the down side is that it has to be the same Android OS and has to be a touchwiz based rom. So how are you getting lucky with all this? I love CM and I'd pick CM over any custom rom any day but i gave up an lost hope of ever getting CM because of the locked bootloader
bjf189 said:
I'll let you know how it goes and thank you. How is it that you were able to boot CM? From my understanding being that the bootloader is locked and has Knox for extra security to make the unlocking like impossible. But a genius came up with safestrap so we are able to use some custom roms but the down side is that it has to be the same Android OS and has to be a touchwiz based rom. So how are you getting lucky with all this? I love CM and I'd pick CM over any custom rom any day but i gave up an lost hope of ever getting CM because of the locked bootloader
Click to expand...
Click to collapse
Safestrap 3.75 had support for AOSP roms (wifi/data didn't work for them either) and 4.0 dropped support for that (there is currently no point). Read the thread for more info http://forum.xda-developers.com/showthread.php?t=2797314
Ok i wasn't using safestrap 4.0. I had 3.75 B05 which i thought was the latest version they had. I'm updated to 4.0 now and about to test the modules on the superlite rom
Update: i have tried the super lite rom using safestrap. The boot animation won't work during start up. When it gets to the welcome screen it freezes. It still does it even without applying the nf5 module. It freezes and will keep popping up that system isn't responding. System just keeps freezing and prompting me to wait or force close. So not sure why my s3 has a problem running it but yours don't
bjf189 said:
Update: i have tried the super lite rom using safestrap. The boot animation won't work during start up. When it gets to the welcome screen it freezes. It still does it even without applying the nf5 module. It freezes and will keep popping up that system isn't responding. System just keeps freezing and prompting me to wait or force close. So not sure why my s3 has a problem running it but yours don't
Click to expand...
Click to collapse
Did you wipe cache/data after installing? Other than that I can't think of anything that would cause that
OpenSourcererSweg said:
Did you wipe cache/data after installing? Other than that I can't think of anything that would cause that
Click to expand...
Click to collapse
Well no. The instructions just said to do a full wipe off everything then install and reboot so extra what i did. What version you running of the rom?
bjf189 said:
Well no. The instructions just said to do a full wipe off everything then install and reboot so extra what i did. What version you running of the rom?
Click to expand...
Click to collapse
I'm running the stock prepaid rom, not superlightrom, sorry if there's any confusion there.
When I tried out superlightrom (quite some time ago) it appeared to work fine (excluding wifi/data and nagging about no SIM card being inserted, nothing like what you're describing) and I went back to stock.
Oh ok. Well it seems that the prepaid version or the s3 in general is dead. That's unfortunate
As in the title states I have the galaxy tab 2 7.0 and recently I installed CWM and a ROM and everything looked like it went right however after I reloaded my tablet nothing seems different it jus seems to return to stock setting and now I cant do the OTA software update which means now certain apps and games I can no longer uses as it says my device isnt compatible. My goal was to simple update from Jellybean to at Least Kitkat.
Can someone help me. where did I go wrong?
Fleacore210 said:
As in the title states I have the galaxy tab 2 7.0 and recently I installed CWM and a ROM and everything looked like it went right however after I reloaded my tablet nothing seems different it jus seems to return to stock setting and now I cant do the OTA software update which means now certain apps and games I can no longer uses as it says my device isnt compatible. My goal was to simple update from Jellybean to at Least Kitkat.
Can someone help me. where did I go wrong?
Click to expand...
Click to collapse
Go to sammobile and flash the latest stock firmware for your device .
Newyork! said:
Go to sammobile and flash the latest stock firmware for your device .
Click to expand...
Click to collapse
Well after a short research I found a ROM called Resurrection Remix, loaded with 5.0.2 (or Lollipop) however now everything is force closing and I barely got my laptop to see it as MTP again after installing a new Binary (glad that did that trick for that) but I cant get it to boot into CWM Recovery bc I cant access the app the only thing it will let me do right now is change the Binary.
How can I fix this issue?
Edit: Okay so I got that solved with doing a factory reset twice, booted in CWM, loaded up the GApps. Now just wondering if there is away to make it not seen with phone options like the dialer or msgs as its jus a plan old tablet, doesnt take a sim card and has no carrier. I do have the source code but I am not tweaking that til I get a better understanding of it.
After a lot of research and tries (amazingly without bricking) I am now running an even newer version of a CM 13 Marshmellow