Related
Hi there,
I need your help urgently.
I received a brand new TF700T and did make it work to support root.
I also did unlock the bootrom protection.
When I tried to install a custom ROM manager (Clockwork Mod) image from:here
The device didn't want to start any more - showing message:
The Device ist Unlocked.
Android cardhu-user bootloader <2.10 e> released by "TW_epad-9.4.5.22-20120615" A03
Checking for android ota recovery
Booting recovery kernel image
But nothing happens anymore (
I can wait for the battery to run empty in this mode.
There' no chance to boot from Micro SD.
The only thing what works at the moment is to connect the device via APX drivers.
I tried to communicate with device via NVFLASH tool
But when trying this - I get the message:
Nvflash started
Unknown Device found
Does any one have an idea where to find appropriate drivers for Nvflash?
Or the parameters to match TF700T?
Thanks in advance!
if you are able to access APX then you still have hope, first of all you need to push custom recovery like TWRP via fastboot mode and then install custom ROM. Most likelly you were to lazy to read a lot information on this forum how to install stuff properlly.
EDIT: if Tf700t has pin hole you should turn it off despite waiting for it to discharge...
nikoltu said:
if you are able to access APX then you still have hope, first of all you need to push custom recovery like TWRP via fastboot mode and then install custom ROM. Most likelly you were to lazy to read a lot information on this forum how to install stuff properlly.
EDIT: if Tf700t has pin hole you should turn it off despite waiting for it to discharge...
Click to expand...
Click to collapse
I did already read a lot - for hours and nights.
But my main problem is: UNKNOWN DEVICE
What does TWRP mean? How do I get fastboot to work?
I'm even not allowed to enter recovery mode.
The device is just recognized as an APX -device...
I can't push or download any custom ROM since I can't communicate with the device in both directions...
For those who messed up really bad and can't boot but are unlocked.
EDIT: I didn't see that you are not unlocked. then you should Power on + volume down, wait, see two icons select wipe, pray to god it helped or not. And if it doesn't boot and you are not unlocked last thing to do is RMA.
You are not allowed to enter recovery because you have stock one with droid dead and red triangle I guess.This is TWRP site and all instructions are here TWRP - Team Win Recovery Project is alternative to ClockworkMod Recovery but better. to get to fast boot turn on your tab holding power on + volume down and then do nothing while it asks to pres up. if you are unlocked you will see 3 icons select usb drive icon. FASTBOOT mode. now follow instructions from TWRP site. after that youl need custom rom zip. if recovery instaled successfuly and you can get into it you'll need to put custom ro into microSD or if you can into internal storage. if you can't conect to pc via cable and start cmd if Windows or terminal if Linux or mac. type
Code:
adb shell
mount /dev/block/mmcblk1p1 /data/media
you will be able to access microSD via recovery (unless it is different than Prime tf201 you will need different command, but give it a try)
nikoltu said:
EDIT: I didn't see that you are not unlocked. then you should Power on + volume down, wait, see two icons select wipe, pray to god it helped or not. And if it doesn't boot and you are not unlocked last thing to do is RMA.
You are not allowed to enter recovery because you have stock one with droid dead and red triangle I guess.This is TWRP site and all instructions are here TWRP - Team Win Recovery Project is alternative to ClockworkMod Recovery but better. to get to fast boot turn on your tab holding power on + volume down and then do nothing while it asks to pres up. if you are unlocked you will see 3 icons select usb drive icon. FASTBOOT mode. now follow instructions from TWRP site. after that youl need custom rom zip. if recovery instaled successfuly and you can get into it you'll need to put custom ro into microSD or if you can into internal storage. if you can't conect to pc via cable and start cmd if Windows or terminal if Linux or mac. type
Code:
adb shell
mount /dev/block/mmcblk1p1 /data/media
you will be able to access microSD via recovery (unless it is different than Prime tf201 you will need different command, but give it a try)
Click to expand...
Click to collapse
Thanks for advise - BUT
I have no choice like selecting Fastboot or USB etc. with volume buttons.
These options unfortunately do not come up anymore.
My device is definetly unlocked. It shows up "Device unlocked" when trying to boot normally.
When trying to go to recovery, with Volume - hold, the device tries to launch to recovery but hangs in status:
Device is Unlocked
Android cardhu-user bootloader (2.10 e) released by "TW_epad-9.4.5.22-20120615" A03
Checking for android ota recovery
Booting recovery kernel.
I have NO option to go to fastboot! Only way will be APX but nvflas always tell me unknown device.
So I was looking for any other version of nvflash.
In other forum I did find hint for nvflash ICS but didn't find right version yet.
If I only could get communication via APX worked to my device, then I could send data via nvflash and APX...
I assume you can't even go to rom as it bootloops on EEE pad screen not on rom splash screen
1. Did you try Wipe option in (power + volume down, wait 5 sec.)? [it is esential in all situations of trying to recover]
2.ammm... when you enter "adb devices" in your cmd on PC doesn't it show anything (do it while your tablet is on and hangs anywhere, just make sure it is on)? list is empty? if not it shows your device with some random letters and numbers.
Try manually setting your pc. Download android SDK and all packages for Android 4.x then in Device Manager (Control panel) find your Tablet and update your driver to Android ADB interface (you can experiment, till your device is shown correctly via adb devices command).
But first of all make sure you do or did first step. it is common issue among Prime users so maybe it can help you.
nikoltu said:
I assume you can't even go to rom as it bootloops on EEE pad screen not on rom splash screen
1. Did you try Wipe option in (power + volume down, wait 5 sec.)? [it is esential in all situations of trying to recover]
2.ammm... when you enter "adb devices" in your cmd on PC doesn't it show anything (do it while your tablet is on and hangs anywhere, just make sure it is on)? list is empty? if not it shows your device with some random letters and numbers.
Try manually setting your pc. Download android SDK and all packages for Android 4.x then in Device Manager (Control panel) find your Tablet and update your driver to Android ADB interface (you can experiment, till your device is shown correctly via adb devices command).
But first of all make sure you do or did first step. it is common issue among Prime users so maybe it can help you.
Click to expand...
Click to collapse
I would like to exchange email-adresses to enhance communication.
You could also send email to [email protected]
I did try with button combination (power & + button) as well, but device did not wipe.
For now - I'm about to update Android SDK )
Hopefully this works to recognize my TF700T...
If you manage to unbrick please post the information back here it may be helpful to others.
t-liner said:
My device is definetly unlocked. It shows up "Device unlocked" when trying to boot normally.
Click to expand...
Click to collapse
How did you get your TF700 unlocked? Asus hasn't posted an unlock tool for it yet that I could find.
Asus devices have the same unlock tool
Sent from my Transformer Prime TF201 using xda app-developers app
nikoltu said:
Asus devices have the same unlock tool
Sent from my Transformer Prime TF201 using xda app-developers app
Click to expand...
Click to collapse
Unlock + Root was never a problem.
I managed it to unlock the device using the TF300T tool / link.
Boot loop was big problem.
I did raise RMA in the meantime. New device is on the way.
Thanks to all repliers.
I will keep off doing this again / wait until xda-experts will provide a working way to CWM TF700T.
My Transformer Infinity isn't bricked, I just can't get it to boot into recovery. (I'm unlocked and rooted, but no custom ROM.) I have tried both CWM and TWRP 2.2.0 with GooManager. The tablet just won't boot into recovery mode. I can hold the Down Volume key and Power button to have the initial boot up menu display. When I press the Up Volume button to boot into recovery mode, it just hangs like the OP talks about. I then have to hold the power button for about five or so seconds to get it to power down again. I can turn it back on and it will boot normally.
I thought maybe something was messed up because I installed busybox, or hacked the Flash Player to work in desktop mode, or tweaked the build.prop file or something. I've put the build.prop file back to default, and removed the busybox apps, but that hasn't resolved the problem. I've tried re-running the unlock tool, but it fails halfway through. I'm not sure if that's normal or not after you've run it once, or an indication of something messed up.
Any suggestions on what else to try or look at are appreciated.
---------- Post added at 06:06 PM ---------- Previous post was at 05:13 PM ----------
UPDATE: I finally got TWRP 2.2.2.0 to work using the following option from the Instruction Page (http teamw.in/project/twrp2/105):
Download - ADB / Terminal method:
Download the above file. Save it to the root of your /sdcard directly (internal memory only) and rename it to twrp.blob
Launch terminal emulator or connect to your computer and open an adb shell, then type the following:
su
dd if=/sdcard/twrp.blob of=/dev/block/mmcblk0p4
Then reboot to complete installation.
stuck at boot logo
Im having the same issue, i was playing around with black baked bean roms i just installed early that day and i wanted to switch twrp to cwm and by deleting goo manger to get roms manger and install the recovery mod but damn i notice it say asus transformer prime and not infinity noe that think about i thats the reason i cant get into reboot recovery mode damn i fuk up bad. okay so i did the stock recovery boot mode got into that i i remember seeing in this post that someone say try to wipe data and i did that and now im juss stuck asus logo and with
(The Device ist Unlocked.)
Android cardhu-user bootloader <2.10 e> released by "TW_epad-9.4.5.22-20120615" A03
Checking for android ota recovery
Booting recovery kernel image
im just there and when i try to plug into my pc it shut down by self, i even wait till the battery die and hope to god that it well reboot itself and pwaw it reboot nope that ****..can any one please tell what i did wrong or didnt do it would help me alot .THanks a million in advanced
dough30i said:
Im having the same issue, i was playing around with black baked bean roms i just installed early that day and i wanted to switch twrp to cwm and by deleting goo manger to get roms manger and install the recovery mod but damn i notice it say asus transformer prime and not infinity noe that think about i thats the reason i cant get into reboot recovery mode damn i fuk up bad. okay so i did the stock recovery boot mode got into that i i remember seeing in this post that someone say try to wipe data and i did that and now im juss stuck asus logo and with
(The Device ist Unlocked.)
Android cardhu-user bootloader <2.10 e> released by "TW_epad-9.4.5.22-20120615" A03
Checking for android ota recovery
Booting recovery kernel image
im just there and when i try to plug into my pc it shut down by self, i even wait till the battery die and hope to god that it well reboot itself and pwaw it reboot nope that ****..can any one please tell what i did wrong or didnt do it would help me alot .THanks a million in advanced
Click to expand...
Click to collapse
Trying to flash the new CWM recovery, too. Mine gets stuck in the bootloader menu (where you have to choose between Wipe, fastboot mode, and cold startup). Every time I select fastboot it says "starting fastboot usb protocol" and just hangs there.
gaxiolafm said:
Trying to flash the new CWM recovery, too. Mine gets stuck in the bootloader menu (where you have to choose between Wipe, fastboot mode, and cold startup). Every time I select fastboot it says "starting fastboot usb protocol" and just hangs there.
Click to expand...
Click to collapse
Damn u too huh. **** I just got mine for only 2 week old and neva thought I go through this IDK what to do but wait gracefully for the senior member to help or come up with a way for us noobie to unbrick my 650 table...Oh BTW leave it alone then u still lucky if can go thru fast boot mode
I have the exact same problem
anyone has a solution to this problem
gaxiolafm said:
Trying to flash the new CWM recovery, too. Mine gets stuck in the bootloader menu (where you have to choose between Wipe, fastboot mode, and cold startup). Every time I select fastboot it says "starting fastboot usb protocol" and just hangs there.
Click to expand...
Click to collapse
That is what it says when you are in fastboot mode, the rest of the job you do with a computer. Also we have had major issues with cwm on the Prime, I would recommend TWRP!
Sent from my Transformer Prime TF201 using xda premium
Same problem
israodin said:
I have the exact same problem
anyone has a solution to this problem
Click to expand...
Click to collapse
Same problem.
Any help? Please! :crying:
Hey All,
My Dad's Xoom died over the weekend - 13months after purchase so is not covered by the warranty. He was browsing a site, it came up with a "Internet is not responding - do you want to continue to wait" message and he clicked Wait - after a second the tablet knocked off. It will not come on by pressing Power and only turns on by pressing Power and Vol +
It gets past the Motorolo logo screen and the device starts the boot animation, about 20 seconds into this it freezes and reboots - this continues in a loop. It's been GEDified and was running the last OTA update 4.1.2 - no root etc.
I can get into the stock recovery and performed a factory reset - but the same thing happens. I've also tried Update From USB with an OTG cable but the screen just shows Choose a package to install and under it has /sdcard but nothing else. I have a dummy zip on both the Flash disk and SD card so it's not reading either.
I've also tried to perform update via ADB - when I select it and connect to a PC (Win 7 32bit) it tries to install drivers but I see In Computer Management that it shows under Unknown. ADB Devices returns List of devices message but nothing under it.
I've also selected the fastboot command at boot, tried fastboot devices and the command does see the Xoom.
So my questions
1) Anyone seen anything like this issue before and know how to fix it?
2) Is it best to try to reinstall the ROM? If so, how do you suggest I can see it with ADB?
3) As I have Fastboot command, could I try to install CWM and see if that sees a ZIP on the sdcard - so I can install a new ROM.
Any help much appreciated :good:
so...I've just done a fastboot oem unlock
and then tried to flash the CWM recovery using the fastboot commands - no errors, press reboot and go into Recovery but still getting Android system recovery 3e :crying:
claned said:
so...I've just done a fastboot oem unlock
and then tried to flash the CWM recovery using the fastboot commands - no errors, press reboot and go into Recovery but still getting Android system recovery 3e :crying:
Click to expand...
Click to collapse
So just to add to this, I found the stock recovery.img, boot.img, userdata.img and system.img and used the fastboot commands to send all to the motorola - all succeeded without error....still the same problem though.
I installed RSD lite and tried a few SBF files but I'm getting an INI error - off to google possible solutions to that now
Ok guys. I really need your help now.
I tried and tried again before posting but after searching on the entire forum I've not found the solution to my problems.
The situation is as follow:
After an Nvflash Restore I'm back to ICS bootloader and firmware.
ICS firmware boot well and I'm able to use my TF300TG without problem at all on ICS.
But now I want to upgrade to JB bootloader to run ParanoidAndroid.
If I Power + Vol.Down I can read:
"The Device is UnLocked."
"Android cardhu-user bootloader <2.10 e> released by "WW_epad-9.4.4.40-20120704" A03"
"Checking for Android ota recovery"
"Checking for RCK.. press key <Vol_Up> in 5 sec to enter RCK"
The problem is that if I wait the 5 seconds without pressing any buttons the Pad don't show me any choice and go straight to the next screen:
"Platform pre os boot configuration..."
"Cold-booting Linux"
And then I'm on ICS working firmware.
I CAN'T enter in fastboot mode. I'm only able to enter in APX mode with Power + Vol.Up
And last time I was able to upgrade to JB bootloader it was via fastboot flash. All other methods have always failed.
How can I restore fastboot on my Pad?
I've tried to download the "WW_epad-user-10.4.3.9.zip" file in my sdcard and the Pad recognize the update.
But after reboot the pad goes in recovery and after a few seconds I can see the image of the droid with the red "!" signal lying on the floor.
I've tried also with "dlpkgfile" file but maybe it was not for my version of the Pad -> WW 10.4.3.9 TF300TG
I don't know what else to do..
Ok. Now I'm back on fastboot.
I've nvflash restore using a blob file of last update "WW_epad-user-10.6.2.6.zip".
This one directly boot into fastboot with Power + Vol.Down.
Unhappily the pad in this way does not reboot in JellyBean OS. It remain stuck during the second ASUS logo.
I can't go in recovery mode like this.
Only fastboot working this way but if I try to flash a blob file via fastboot the pad give me a message "insufficient memory" while trying to write the system..
Anyone can help me??
Hi folks,
I have been using Acer A510 for almost 1 year now, and upgraded 7 months ago to the latest JB OTA. I haven't ever rooted it.
Since 2 days, it can't boot suddenly, stuck with the following error message:
Booting failed
Bootloader vJB-d0ca683: Starting Fastboot USB download protocol
Click to expand...
Click to collapse
After a bit of Googling, I tried to unlock the bootloader, as a way to recover the tablet. But that keeps failing as well:
[ [email protected]: /tmp ]# fastboot oem unlock
...
Click to expand...
Click to collapse
At this step, I can see the unlock icon and played with Vol+ and Vol- to quickly select the "Unlock" option, and this is what I get on the tablet:
Unlocking...
Bootloader vJB-d0ca683: Starting Fastboot USB download protocol
Click to expand...
Click to collapse
And on the computer (kind of error messages that are of no help):
...
FAILED (remote: (Unknown error code))
Click to expand...
Click to collapse
So it appears the bootloader can not be unlocked, and I can not even enter the recovery.
I've read somewhere that it may be possible to recover in APX mode.
So is there any way to recover it (either through the bootloader or through APX mode)?
Thanks for your help!
Booting failed.......Bootloader VJB-d0ca683
Hi.
I have been using Acer A510 for almost 1 year now, I haven't ever rooted it.
Today, it can't boot suddenly, stuck with the following error message:
Quote:
Booting failed
Bootloader vJB-d0ca683: Starting Fastboot USB download protocol
Please help me.....
h4ck3r3l said:
Hi folks,
I have been using Acer A510 for almost 1 year now, and upgraded 7 months ago to the latest JB OTA. I haven't ever rooted it.
Since 2 days, it can't boot suddenly, stuck with the following error message:
After a bit of Googling, I tried to unlock the bootloader, as a way to recover the tablet. But that keeps failing as well:
At this step, I can see the unlock icon and played with Vol+ and Vol- to quickly select the "Unlock" option, and this is what I get on the tablet:
And on the computer (kind of error messages that are of no help):
So it appears the bootloader can not be unlocked, and I can not even enter the recovery.
I've read somewhere that it may be possible to recover in APX mode.
So is there any way to recover it (either through the bootloader or through APX mode)?
Thanks for your help!
Click to expand...
Click to collapse
I am having the same problem with my acer A700,I tried anything I could and I still did not find any solution,help would be very appriciated.
Same situation
h4ck3r3l said:
Hi folks,
I have been using Acer A510 for almost 1 year now, and upgraded 7 months ago to the latest JB OTA. I haven't ever rooted it.
Since 2 days, it can't boot suddenly, stuck with the following error message:
After a bit of Googling, I tried to unlock the bootloader, as a way to recover the tablet. But that keeps failing as well:
At this step, I can see the unlock icon and played with Vol+ and Vol- to quickly select the "Unlock" option, and this is what I get on the tablet:
And on the computer (kind of error messages that are of no help):
So it appears the bootloader can not be unlocked, and I can not even enter the recovery.
I've read somewhere that it may be possible to recover in APX mode.
So is there any way to recover it (either through the bootloader or through APX mode)?
Thanks for your help!
Click to expand...
Click to collapse
+1
I get exactly the same problem this WE :crying:
I never root/flash/play with recovery or anything else.
Tablet shutdown by itself, then after restart I get trouble to boot :
First the Android said it was unable to start due to encryption : "encryption unsuccessful > need factory reset". Even if I NEVER activate encryption !
I try couple of reboot without suceess, then now it stop on Acer logo and go to fastboot mode at each startup.
Then I have exactly same trouble : impossible to unlock bootloader using fastboot.
No way to flash something.
Need help !
If fastboot is available, you can try to boot CWM Recovery or TWRP recovery
fastboot -i 0x0502 boot C:\....\cwm-recovery.img
From there you can try a factory reset
Shreps said:
If fastboot is available, you can try to boot CWM Recovery or TWRP recovery
fastboot -i 0x0502 boot C:\....\cwm-recovery.img
From there you can try a factory reset
Click to expand...
Click to collapse
It doesn't work as the bootloader is still locked !
Code:
FAILED (remote: bootloader is locked.)
And it's impossible to unlock bootloader as describe in the post.
Any other idea ?
You can try to download the full ROM from acer Web Site (GEN1 or CUS1 depending on what you had before)
rename it to update.zip and put it on your sdcard
Reboot your tablet in recovery if you can to flash it, or in bootloader (don't remember if the Acer bootloader can flash an update.zip)
katull said:
Hi.
I have been using Acer A510 for almost 1 year now, I haven't ever rooted it.
Today, it can't boot suddenly, stuck with the following error message:
Quote:
Booting failed
Bootloader vJB-d0ca683: Starting Fastboot USB download protocol
Please help me.....
Click to expand...
Click to collapse
Its 2015 now but i will post this anyway..
Try this
1st, Boot into recovery:
- Press [vol-] + [power]
- Once the tablet vibrated, let go [power] and keep [vol-].
- Now the tablet vibrates a second time, let go [vol-] and press [vol+] quick
- Once the text that appears on the screen ("loading recovery kernel image"), let go [vol+].
2nd, choose "Wipe data cache & factory reset" via volume rocker and power button to select it.
3rd, choose "reboot"
I solved mine using that steps, hopefully it will solve yours.
Thank you very much!!! It worked for me!
Zewz said:
Its 2015 now but i will post this anyway..
Try this
1st, Boot into recovery:
- Press [vol-] + [power]
- Once the tablet vibrated, let go [power] and keep [vol-].
- Now the tablet vibrates a second time, let go [vol-] and press [vol+] quick
- Once the text that appears on the screen ("loading recovery kernel image"), let go [vol+].
2nd, choose "Wipe data cache & factory reset" via volume rocker and power button to select it.
3rd, choose "reboot"
I solved mine using that steps, hopefully it will solve yours.
Click to expand...
Click to collapse
So I have tried the above listed technique and it brings up the clockwork mod screen but does not go past it. Any more suggestions?
Thanks.
------------------------------------------------------------------------------------
- Press "vol-" + "power"
- Once the tablet vibrated, let go "power" and keep "vol-".
- Now the tablet vibrates a second time, let go "vol-" and press "vol+" quick
- Once the text that appears on the screen ("loading recovery kernel image"), let go "vol+".
2nd, choose "Wipe data cache & factory reset" via volume rocker and power button to select it.
3rd, choose "reboot"
------------------------------------------------------------------------------------
After trying many other approaches this one worked for me! Thank you very much!
Hello everyone, it may be late for you but i found a solution for a bricked A510 :
for my part i only had access to bootloader unlock and fastboot, but it didn't communicate with my laptop
So i found a software called DriverHub and launched it with my A510 connected to my laptop
It found the right driver for it (was not the of from Acer or any universal ADB driver) and i could use the fastboot mode to unlock OEM and flash TWRP, and now i have Cyanogen running on my tab who came back from dead
Here's a link to the software : www drvhub net
Have a nice day
Hi all, i need help for my ASUS TF300T :
Symptoms:
- Boots to Asus screen with nVidia logo at the bottom-right
- Behavior is constantly rebooting to the asus screen until battery is dead
- Hold down VOL- and PWR, goes to Asus bootloader with the following options from left to right: RCK, Android, USB and Wipe Data.
- Recovery Kernel causes it to give me the error "unrecoverable bootloader error (0x00000000000000)"
- Choosing the Android does nothing.
- Wipe Data causes it to give me the error "unrecoverable bootloader error (0x00000000000000)"
- Choosing USB gives you the text "starting fastboot USB download protocol"
I tried all i found on XDA, but it don t want to "writing".
ADB dont work, only fastboot.
Last try :
Steps:-
1. Download the latest ROM from ASUS website Which matches your SKU.(Important).
It would look somehing like this (TF300T-TW_epad-10_6_1_15_3-UpdateLauncher . zip)
2. Extract it and rename that file to ( EP201_768_SDUPDATE.zip )
3. Now copy this new renamed file to SDCARD (Root of sd card). Put the SDcard into tablet.
4. Now Press and hold Volume Down + Power for a few seconds. Then you will see the ASUS recovery options.
5. 3 icons will appear: RCK, Android, and Wipe Data. The RCK should be flashing green. Press the UP Volume Key Once.
Now wait for a few minutes. It will flash the ROM.
And wola! Your TF300T will again work fine!!
No effect.
All command stop at "writting".
Any idea ?
if fastboot is working try this with computer plugged
http://forum.xda-developers.com/showthread.php?t=2399698
fredodu38 said:
Hi all, i need help for my ASUS TF300T :
Symptoms:
- Boots to Asus screen with nVidia logo at the bottom-right
- Behavior is constantly rebooting to the asus screen until battery is dead
- Hold down VOL- and PWR, goes to Asus bootloader with the following options from left to right: RCK, Android, USB and Wipe Data.
- Recovery Kernel causes it to give me the error "unrecoverable bootloader error (0x00000000000000)"
- Choosing the Android does nothing.
- Wipe Data causes it to give me the error "unrecoverable bootloader error (0x00000000000000)"
- Choosing USB gives you the text "starting fastboot USB download protocol"
I tried all i found on XDA, but it don t want to "writing".
ADB dont work, only fastboot.
Last try :
Steps:-
1. Download the latest ROM from ASUS website Which matches your SKU.(Important).
It would look somehing like this (TF300T-TW_epad-10_6_1_15_3-UpdateLauncher . zip)
2. Extract it and rename that file to ( EP201_768_SDUPDATE.zip )
3. Now copy this new renamed file to SDCARD (Root of sd card). Put the SDcard into tablet.
4. Now Press and hold Volume Down + Power for a few seconds. Then you will see the ASUS recovery options.
5. 3 icons will appear: RCK, Android, and Wipe Data. The RCK should be flashing green. Press the UP Volume Key Once.
Now wait for a few minutes. It will flash the ROM.
And wola! Your TF300T will again work fine!!
No effect.
All command stop at "writting".
Any idea ?
Click to expand...
Click to collapse
th3cr0w said:
if fastboot is working try this with computer plugged
http://forum.xda-developers.com/showthread.php?t=2399698
Click to expand...
Click to collapse
Can you guys take a look at my post here? http://forum.xda-developers.com/showthread.php?t=3265759
I am having a very odd issue with my tf300t.
Thanks but no
th3cr0w said:
if fastboot is working try this with computer plugged
http://forum.xda-developers.com/showthread.php?t=2399698
Click to expand...
Click to collapse
Sorry for the delay of my answer, i ve lost my internet. Thanx at all, but it don t help, it doesnt want to write, and no adb command,i ve installed all the driver i could find.
What command in fastboot could let it writing ?
Thanx !!!