Lenovo A60+ ROOTED stock rom (Philippines). WORKING contact identification either international format or local format.
this one works without any problems for PH Lenovo A60+ specially have tried ALL stock roms(chinese) and cooked/custom roms has problem with caller i.d. or number identification from international format (+63xxxxxxxxxx) to local format (0xxxxxxxxxx) in your contacts or phonebook. see instructions below to root your Lenovo A60+ without having issues/problems with caller/contact identification:
in ALL stock ROM and custom roms i have tried, ALL these have ISSUES or PROBLEMS with caller/contact identification. lets say:
a. your contact stored number is 0919xxxxxxx
b. 0919xxxxxxx calls you, the contact identification will show.
c. 0919xxxxxxx send you an sms/text. the contact will NOT show because the SMS sender is +63919xxxxxxx
twist:
a. your contact stored number is +63919xxxxxxx
b. 0919xxxxxxx calls you, the contact identification will NOT show. because the caller incoming number is 0919xxxxxxx and your phone number in contacts is 63919xxxxxxx. this two numbers is treated as two different numbers.
c. 0919xxxxxxx send you an sms/text. the contact will show because the SMS sender is +63919xxxxxxx
basically in the Philippines number formats sent by networks are:
receiving calls: 0919xxxxxxx or international format
receiving SMS/text: +63919xxxxxxx or local format
as said i have tried ALL(as of date january 14, 2012) stock roms and custom roms available in the internet for rooting this Lenovo A60+. have spent DAYS figuring out and trying out(kaskus, xda-dev, symbianized, etc). dont look any further and waste time like what i did. this procedure is for you to save yourself days and time lost!
----------------
DISCLAIMER: i am not responsible for any lost of data, your phone bricked or loss of your phones warranty. remember that ROOTING an android device VOIDS manufacturers WARRANTY. I DO not HOST any of these files.
BEFORE rooting, do this necessary steps:
1. backup your phone's IMEI. this is likely to be erased/lost in ROOTING or installing new roms. thus you wil get an "Invalid IMEI" message or your sim cannot locate networks or has no signal. check google play for IMEI backup apps and backup into your SD card. otherwise read the tutorial after on how to re-create your IMEI file and restore into your phone system.
2. BACKUP your contacts and messages/sms, applications etc. most likely all data will be lost too. so you need to restore it after ROOTING procedure.
3. DISABLE and turn off any anti-virus softwares in your PC and any PC to Phone applications such as IdeaTool, MobileGO, Snap Pea, Etc. so that this will NOT interfere with the rooting procedure.
----------------
TUTORIAL PROPER in rooting your Lenovo A60+ ROOTED stock room version with SU(superuser apk and binary), the EASY and beginner/newbie way:
Download these files and tool:
1. Philippine STOCK Lenovo A60+ ROM version A60+_ROW_S310_120823 ROOTED with SU or superuser: mediafire.com/?n1i35c3neu6ud3d - Size 125.45 MB - DO NOT unzip this.
2. Mobileuncle apk and Recovery Image: mediafire.com/?bo12ktkrrn57314 - Size 5.29 MB - unrar this to get a.) mobileuncle.apk b.) recovery.img
3. Windows Driver: mediafire.com/?31nddwqdot5ajp2 - Size 10.89 KB - UNZIP this. this is for your PC to read your phone via flashtool (so link number 4 will be able to communicate PC to Phone/Device).
4. Flash Tool: dropbox.com/s/f7gfyqtwyn5qkpa/ISO-8859-1__Flash tool.rar - Size 3.60 MV - unrar/unzip this to get "Flash tool" folder.
5. Firmware Upgrade: mediafire.com/?ehiyzbdmlauo7i7 - Size 166.59 MB - unrar/unzip this to get the folder "Boot". this is a chinese custom rom firmware build number A60+_S312_120630 with SU(superuser) and mobileuncle tools 2.3.6 pre installed and a lot of pre installed bloatwares. dont worry will be removing this and installing an english language rooted rom anyways.
Follow these step by step, with SIM cards REMOVED from the phone/device:
Step 1: Prepare needed files and copy to SD Card the three files:
a.) a60+ori.zip (link number 1) should be zipped file so DONT unzip this.
b.) mobileuncle.apk (unzipped from link number 2)
c.) recovery.img (unzipped from link number 2)
into the root/top folder of your SD card. see screenshot here: http://screencast.com/t/AvBLMyth
Step 2: INSTALLING the PC drivers - Turn off the phone, take the battery out, connect your phone to the pc(while battery is not inserted) via usb cable. your pc will detect your device and will try to search and install drivers. MANUALLY install(manually select the drivers pointing to the drivers folder on your pc) the drivers in the unzipped folder "MT6575 USB VCOM drivers" (link number 3) appropriate for your windows version(xp/vista/7).
Step 3: ROOTING with Flashtool - unplug usb cable from your phone, insert the battery (do not turn on the phone/device yet).
Run Flash Tool(Flash_tool.exe in the unzipped folder of link number 4). screenshot here: http://screencast.com/t/BLOR3S0Nn1
while in flash tool window:
a.) Click scatter-loading at the upper right corner of the flashtool window.
b.) browse to "Boot" folder which was extracted/unzipped in link number 5.
c.) select MT6575_Android_scatter.txt file and click open. see screenshot: http://screencast.com/t/6TaKi73J
d.)
d.1. Tick/Select all 9 options.
d.2. Click "Firmware -> Upgrade" button at the top.
See screenshot: http://screencast.com/t/OIKfwN0s
d.3. Flashtool will now be SEARCHING or WAITING for your device to be connected and ready to flash/write the files you selected in step d.1. see screenshot: http://screencast.com/t/1H3By7t3wsll
Step 4: while your phone is TURNED OFF, NO SIMS, NO SD card,.. and it has its battery on it; on your phone/device HOLD(press and dont release) "volume +" or "volume up" key(top-right side of your phone) and plug the cable until the progress bar at the bottom is running, when the progress bar turns RED, you can RELEASE the "Volume up/+" key. see screenshot: http://screencast.com/t/wDPM9Ym8AHG
Wait around 5 minutes. the progress bar at the bottom will show as RED then YELLOW, then TEAL. wait until a green circle in a pop up window appears. when the green circle appears; this mean success in flashing with the rom upgrade. see screenshot: http://screencast.com/t/OGLHkf55
Step 5: Close Flashtool application in your PC. unplug the phone/device USB cable. turn on the device you would notice the default language is Chinese. to change language, go to settings(purple icon with gear), scroll down to languages(violet icon with letter A). select first option at the top. tap English.
Step 6. INSTALLING MOBILEUNCLE CWM RECOVERY - Turn off your phone/device and insert your sim cards and your SD Card(the SD card you copied the 3 files in Step 1). turn it back on. on "New Sim Detected" pop up window. just close it.
6.a. turn OFF "GPS" and "Data conn." at the top(swipe the top area going down).
6.b. open the application "FileBrowser" which is pre installed in the firmware. browse to your SD card's root and install mobileuncle.apk that you copied in step 1(this is version 2011.01.04v1.2). a pop up window will show "Install blocked". tap "Settings" tap or check "Unknown sources". Tap "OK" on the "Attention" window. tap on back. tap again on mobileuncle.apk tap install. tap open. tap get started. tap OK in the chinese pop-up window.
6.c. tap on "Flash Recovery From SdCard" (its the second option from the top). tap on "recovery.img" then tap "OK". Superuser will pop up and quick tap OK to grant superuser permission.
6.d. the phone will reboot and enter CWM-based Recovery v6.0.0.3(english version, CWM stands for ClockWorkMod).
Step 7. INSTALLING THE STOCK ROM WITH ROOT USING CWM - IN CASE that the phone/device did not enter CWM recovery but booted as regular boot. turn the phone off. turn it back ON while you HOLD on the "Volume +/up" button. this will enter to CWM-based Recovery. otherwise proceed with steps below:
7.a. while in the CWM-based Recovery console, Lenovo A60+ touchscreen doesnt work. the hardware volume up and down works as buttons to scroll up and down. while the power button works as the SELECT button.
7.b. scroll down twice(press volume down button twice) to highlight "wipe data/factory reset" option. press power button to select it. scroll down and highlight "Yes -- delete all user data". press power buttn to select. wait for around 20 seconds to complete.
7.c. scroll down to "wipe cache partition" and press power button. scroll down to "Yes - Wipe Cache". wait 2 seconds to complete.
7.d. scroll down to "install zip from sdcard" and press power button. press again power button to select "choose zip from sdcard".
7.e. scroll down to locate and highlight "a60+ori.zip". press power button. confirm the install by scrolling down and select "Yes - Install a60+ori.zip". wait for around 1 minute for the process to complete. the process completes with the console last text "Install from sdcard complete." shows at the bottom while you will be able to choose from the options at the top again.
7.f. scroll down and select +++++Go Back+++++ then select "reboot system now".
Step 8: FIX on INVALID IMEI AFTER SUCCESSFUL ROOTING - by now you have a ROOTED A60+_ROW_S310_120823 ROM. all apps are working EXCEPT that your phone has "Invalid IMEI". this is because Device IMEI's are UNIQUE to each phone. now, lets fix this!!!
files and tools to download:
8.1. download t-kstore.com/imei.zip - Size 4.22 MB - its a dos based IMEI generator and encryptor and write to file.
8.2. download download.estrongs.com/app-es-file-explorer.html - Size 2.81 MB - an apk "es_file_explorer_v1.6.2.4.apk" and application to manage files in your android device. copy the es_file_explorer_v1.6.2.4.apk file to your SD card's root/top folder.
8.3. RE-CREATING your phone/device IMEI - locate your Unique Lenovo A60+ IMEI. there are two places these 15 digit number can be located. FIRST is when you open your phone, its in the sticker attached to your phone under the battery. on Philippine released phones its in between the stickers of Lenovo and NTC stickers. SECOND location is the sticker on the side of your phone's Lenovo box/carton/package.
8.4. extract/unzip imei.zip that you downloaded in 8.1.
8.5. go to the extracted folder and run "dos.cmd". this will run a DOS console window in your pc.
8.6. in the dos command line type:
imei.exe 123456789012345 123456789012345
then press enter to execute the command line.
whereas, the first set of numbers is your IMEI #1 and second set is your IMEI #2 as you located in Step 8.3.
after pressing enter this will generate your encrypted IMEI file with the name "MP0B_001_NEW". see screenshot: http://screencast.com/t/lUUzC3yiTNn
8.7. close the dos console window. rename that file generated "MP0B_001_NEW" to "MP0B_001" (without the qoutes) in the folder where you extracted imei.zip
8.8. copy MP0B_001 to your phone's sd card. for this tutorial just copy it to your sd card's root folder.
8.9. INSTALLING ES Explorer, moving the IMEI file to the phone's correct system folder - install and run es_file_explorer_v1.6.2.4.apk which you previously downloaded and copied to your SD card in step 8.2.
8.10. open ES File explorer on your phone. first window on first run just click okay. tap on the bottom left button of your A60+. tap "Settings". tap "File Settings" select or check "Show Hidden Files". tap back. scroll down and tap "Root Settings". tap or check "Root Explorer". SU pop up will show and grant root or tap yes to give privilege to ES File Explorer. tap or check "Up to Root" and "Mount File System". tap back twice.
8.11. on your sdcard's root/top folder locate the file MP0B_001 which you copied in your sd card in step 8.8.
long press on the icon then tap "Copy". a little pull up window will show at the bottom(which is the clipboard of es file explorer).
8.12. tap the "favorites" icon at the top-right corner. tap the device icon or the one with "/" which is to the right of the HOME or house icon. this will bring you to the root folder of your device. navigate(navigate by tapping the folders) to: /data/nvram/md/NVRAM/NVD_IMEI/
you will see 3 files. long press on the MP0B_001 then select "Delete". yes DELETE you wont be using this anyways. tap okay when youre asked to confirm deletion. at the bottom, swipe up the es file explorer's clipboard. tap on MP0B_001 icon which is in the clipboard. a message will show something like "MP0B_001 successfully copied...". exit es file explorer. RESTART your A60+.
EUREKA!!! you strike gold! you now have a ROOTED A60+ with working caller/sms identification.
Step 9: restore your backups, apps, sms, contacts, settings.
------------------
SHOUTS to: "mingxincun" (who cooked the stock rom to have SU and ROOT), Tyo Ramadhan(Indonesia LE group), T&K Online Store(for the imei fix), kaskus, xda-dev, symbianized pinoys and FB Lenovo A60+ users/fan page in facebook.com/lenovoa60plususers
repost from here: http://www.facebook.com/notes/guill...orking-contact-identification/539507352727233
PERFECT!!!
Dude thanks man. this is timely for everybody here in the PH. but untimely for me, unfortunately i followed the steps of kaskus. haha
nevertheless this is cool.
bro for others to really appreciate this post, you got to put them hyperlinks right.
Im copying the flashtool link but it gives me this bandwidth error, because Ill just be needing the root access. android market wont download apps i need to replace it.
nag eenglish lng ako pra mka benefit din yung mga forangers. hihihihi
Could you also help us how to swap sd card with internal storage? so that apps could directly install in the external sd card.
Link2SD
thanks for the tut bro!!!
to increase internal storage of A60+
we need to install Link2SD
Using Minitool Partition wizard
we need to create 2 partition in our SD card
first partition must be set to Primary & Fat32
second partition must be set to Primary & ext4 (A60+ doesn't recognized fat, fat32, ext2, & Ext3 in second partition)
please note that the second partition even we sized it as 2gb when we open the link2SD storage info
the second partition display it as 1Gb only, but worry not it will still going to use the other space yuo have created
mine, was set to 2gb and have transferred 153MB of files to the second partition
and it is still showing 100% free and used: 153MB
@guilliam perhaps you can add this to your tut.
Thanks again..God Bless!
thanks for this i have rooted my lenovo a60+ hehe, there's one problem i've encountered when i go to setting and click on the about phone the settings becomes force close, is it happened to you? well i had follow the instructions though.. anyway thanks for this TUT hehe hope there will be rom for our lenovo a660+ which had no bugs at all hehe
Guidance needed!
Hello Guiliam
Thanks for such a detailed post. I am quite new to this, and just have some basic understanding on the rooting/flashing etc. I am planning to root my Lenovo A60+ which I have bought in China, which has unnecessary bloatware and more importantly there is no Google Play app in that. I am based in India, and would want to know if your ROM will work for me as well?
Is your post only covering Rooting part or does it also cover any flashing part (custom ROM), the reason I ask is because apart from rooting, I also want to install the ROM which is in English (or can the language be changed automatically?)
I am looking to root my "Lenovo A60+" - primarily for reasons like:
1. I do not have stock Google Play Store app, and I am not sure how to download that app.
2. I have bought this phone in China, and there is lot of unwanted Chinese software which I want to get rid of.
3. I want to get rid of the Chinese keyboard (iFlytek) and only have Android keyboard.
I have questions like:
1. If my rooting fails for some reason, can I un-root the device to restore it to the previous state (i.e. with all the stock apps)
2. I want to avoid bricking my phone, even if it happens, will I be able to go back to the previous state by un-rooting?
Some details of my phone:
Model - Lenovo A60+
Android version - 2.3.6
Build number - A60+_S318_121108
Baseband version - MAUI.11AMD.W11.50.SP.V13.P10,2012/07/13 13:26
"Step 2: INSTALLING the PC drivers - Turn off the phone, take the battery out, connect your phone to the pc(while battery is not inserted) via usb cable. your pc will detect your device and will try to search and install drivers. MANUALLY install(manually select the drivers pointing to the drivers folder on your pc) the drivers in the unzipped folder "MT6575 USB VCOM drivers" (link number 3) appropriate for your windows version(xp/vista/7)."
Anyone I need help...I dont get this step >_<"
Eternal29 said:
"Step 2: INSTALLING the PC drivers - Turn off the phone, take the battery out, connect your phone to the pc(while battery is not inserted) via usb cable. your pc will detect your device and will try to search and install drivers. MANUALLY install(manually select the drivers pointing to the drivers folder on your pc) the drivers in the unzipped folder "MT6575 USB VCOM drivers" (link number 3) appropriate for your windows version(xp/vista/7)."
Anyone I need help...I dont get this step >_<"
Click to expand...
Click to collapse
You'll need to cancel Windows looking for the drivers. Of course, the installation will fail.
Then go to Device Manager and look for the device with the "!". Right-click on that device, choose Update Driver then locate the drivers that you downloaded.
---------- Post added at 03:19 PM ---------- Previous post was at 03:15 PM ----------
Thanks a lot for this excellent tutorial!
I've just successfully rooted an a60+! Now I can get Link2SD to work on this.
anasuri said:
Hello Guiliam
Thanks for such a detailed post. I am quite new to this, and just have some basic understanding on the rooting/flashing etc. I am planning to root my Lenovo A60+ which I have bought in China, which has unnecessary bloatware and more importantly there is no Google Play app in that. I am based in India, and would want to know if your ROM will work for me as well?
Is your post only covering Rooting part or does it also cover any flashing part (custom ROM), the reason I ask is because apart from rooting, I also want to install the ROM which is in English (or can the language be changed automatically?)
I am looking to root my "Lenovo A60+" - primarily for reasons like:
1. I do not have stock Google Play Store app, and I am not sure how to download that app.
2. I have bought this phone in China, and there is lot of unwanted Chinese software which I want to get rid of.
3. I want to get rid of the Chinese keyboard (iFlytek) and only have Android keyboard.
I have questions like:
1. If my rooting fails for some reason, can I un-root the device to restore it to the previous state (i.e. with all the stock apps)
2. I want to avoid bricking my phone, even if it happens, will I be able to go back to the previous state by un-rooting?
Some details of my phone:
Model - Lenovo A60+
Android version - 2.3.6
Build number - A60+_S318_121108
Baseband version - MAUI.11AMD.W11.50.SP.V13.P10,2012/07/13 13:26
Click to expand...
Click to collapse
I'm in the same situation!
Did you root it yet?
sir do you have root procedures for lenovo s720?
dehq said:
I'm in the same situation!
Did you root it yet?
Click to expand...
Click to collapse
Rooted it today, and it's awesome!
It has Google Play
Thank you, @guilliam!
the link #4 ( dropbox ) is not working. has exeeded bandwith ;o(
Does anyone have ROM with Polish language?
Thanks Very Much
You saved my life dude. Thanks a lot.
Can we fix the contact id on all rom or just that rom you attached.
Stock rom is ok but it can't play some game that others rom can (Bad pigges, ashalt 7 can run on S317 but S3110 and S311 can't)
PS. Does anyone have A60+ row s311 121023. Please backup and sent it to me. [email protected]. Thank in advanced because I want to unroot my device for guarantee
Worked simpleee
As simple as its is.. U can stop @7 if IMEI is fine with ur device as was with mine..
---------- Post added at 01:54 PM ---------- Previous post was at 01:49 PM ----------
Can u help to format now after rooting the device once by the above method? The usual method by pressing the vol- key doesnt work anymore...
Question, I need help!
Hi, thanks for the great tutorial, I have successfully rooted my Lenovo a60+! My question is, can I install custom ROMS on my freshly rooted phone? Popular ROMS like Cyanogenmod or Paranoid Android require phone compatibility, and my phone is not on their list. I'm starting to feel sick after I have rooted my phone because I have no idea yet how to install custom roms (which was my main reason of rooting), will you be nice to me by answering these questions?
- Does custom ROMS do require phone compatibility?
- Are all or some custom ROMS compatible to all android phones as long as they are rooted?
- If so, do you have a list of ROMS that are compatible to my Lenovo a60+?
- Lastly, please tell me that there is a way to upgrade the phone's OS from gingerbread to jelly bean or even ice cream sandwich.
Please help me! I have an empty rooted Lenovo a60+ and I need a custom ROM to be installed before I put my data back again. Thanks in advance, and also for the root tutorial. ))
Please! Anyone! Heeeellpp!!!
My Phone is Bricked!
It stays in the Lenovo screen and will not eventually boot up.
I have installed Chainfire 3D from the market and was surprised that it did not have the options that I was expecting from the tutorial, so I read the description on the application, it says, ''Driver not installed, you need to install driver before you can access options''. So i installed the drivers, then everything was ok, I can still use my phone, but Chainfire 3d still needs me to update the drivers, so I did, then, suddenly, my phone's screen just froze, and I cannot access my notifications, home back menu keys, power button, in fact my screen does not work anymore. Feeling nervous, I left it untouched for an hour and checked it back its still the same the moment i left it. So I took the battery out, tried to turn it on again, and now, I'm stuck with the Lenovo screen and will not boot up to stock ROM, please Help me! I need my phone as soon as it is fixed! Please HELP!!!
Here are the details of my rooted Lenovo A60+:
- Followed the rooting process here, so I have Clockwork recovery mod 6
- Has a installed Chainfire 3d 1.7
- Installed stock ROM
- Has no backups
- Can access the recovery mode
- Already done the ''wipe data'' ''wipe cache'' ''factory reset'' and everything, wiped my phone clean.
Please help me, my parents are going to kill me if I can't fix my phone.
Thanks for the post. When I tried I got an error "S_PART_NO_VALID_TABLE (1037)" after the status bar showed 100% in red colour. Need help please. Thank you.
Thank you for the post but it cannot work
Error S_PART_NO_VALID_TABLE (1037), and the status bar stays 100% red color. Anyway, thanks
Hello!
Today I show you How to modify your stock ROM.
In this guide I won't use PC or other software because I want to make this guide easy for all.
Important notes:
For this guide I'll use Samsung Galaxy J3 2016, but similar principles works on other devices.
What you need:
TWRP Recovery for your device.
Root Explorer
Rooted Android Device
And APKs(See later what I think)
Step 1:Activating OEM unlock
Don't skip this step because it's the most important.
Go to Settings and tap About Phone.
Tap 7 times on Build Number and activate Developer Settings.
Enter in Developer Settings and search for OEM UNLOCK, ignore warning and activate them.
If you don't have OEM unclock don't worry you can skip this step.
Step 2: Flashing TWRP Recovery via Odin(Samsung Phones only)
If you don't own Samsung device(or device which can be rooted via KingoRoot) you can skip this step because this step is important for rooting phone.
YOUR WARRANTY IS NOW VOID
Download TWRP recovery for your device and flashable .zip file of SuperSu v2.XX(determine which version is best for your phone).
Run Odin, when Odin starts go to Options tab and de-check Factory Reset Time and Auto Reboot,
then return to main section. And click on AP button and locate your twrp recovery .tar file and than press open. Now turn of your phone and enter in Download Mode hold Power Button + Volume Down Button + Home Button and connect to PC and click on start. When green message PASS apear in Odin you successfully flash recovery.
To restart phone hold power and volume buttons for some seconds or simply remove and return battery
Step 3: Rooting phone
Enter in Recovery Mode(for Samsung device hold power+volume up+home). Swipe slider to allow modification on system partition. Tap on install and find zip file from SuperSU flashable zip and swipe slider to install zip. Wait to installation complete and reboot phone (your phone can reboot some times to complete.
Installing Root Explorer and exploring system/app and system/app-priv
Install Root Explorer and grant Root access.
Now we explore system partition, but before we start in TWRP Recovery make a backup of System partition.
Enter in system/app directory and search for bloatware and other unuseful apps, but be careful what you delete!
Now download apks from apk mirror(clean apks) and place in system/app and when you finished with placing apk files reset phone to Factory Settings.
Tips:
If you have older Android version( <5.0 Lollipop)
download and install XPosed Framework and MonsterUI from Google Play to have Lollipop Notification Bar.
If you have Samsung device with Android Lollipop 5.1.1 or newer go to system/priv-app(or app-priv) and find SecSetupWizard folder delete them and Factory Reset your phone and Voila Setup Wizard is now AOSP.
For Samsung TouchWiz Lollipop ROMs or newer you can download Material Status bar to get AOSP like experience.
If you running Samsung TW Lollipop ROM and want to have AOSP Phone and Contacts app go to system/app-priv(or priv-app) search for SecContacts_L folder and delete them, insert Google Dialer apk(downloaded from apk mirror looks for MINAPI(I USE MINAPI21) and Google Contacts apk and Factory Reset Phone. Now you free from Samsung Phone and Contacts app.
Customizing Stock ROM is so funny and you can make a new ROM(not new but different ).
If I help you Hit thanks button :victory:
And if you have suggestion write in post(s).
Any update on the video ?
Mr.Reticent said:
Any update on the video ?
Click to expand...
Click to collapse
You need to wait to I upload ROM now I'm testing Lineage OS by @djeman
Take a screenshot to I'm not lie
Uploading but it can take a long time...
ROM IS NOW AVAILABLE.
SEARCH ON XDA: J3 RELOADED(ONLY FOR FN MODELS)
-=-=-
mod edit - thread closed as per OP request
How to Root Samsung Galaxy A7 2018 (a750fn) + Working Secure Folder & Samsung Health
Hello, this is a guide on how to root Samsung galaxy A7 2018 (a750fn). I've tried to simplify the guide as much as I can but I still suggest to root your phone only if you know what you are doing! Also if you have any questions or problems, just ask.
Note: Sorry for any grammatical or spelling mistakes. English is not my native language.
!Disclaimer!
- You do this at your own risk! I am NOT responsible for bricked devices, stuck on bootloop etc.!
- Backup your device before proceeding forward!
- This guide WILL trip Knox so your warranty will be void!
- The Knox-dependent applications like Secret Folder and Samsung Health will stop working but in this guide, there are two other miniguides that will explain how to enable them even after tripped Knox. - All of these steps have been tested on my phone - Samsung Galaxy A7 (2018) (a750fn) where they worked without problems.
Required Software/Resources:
- Odin (for flashing) - Download
- Samsung USB Drivers - Download
- 7zip (for archives) - Download
- Firmware with the last security patch from 2020 (for me, the patch was from November 2020) - Download
- TWRP Recovery - Download
- Magisk (for root) - Download
- DM-VERITY, FORCED ENCRYPTION, AND DISC QUOTA DISABLER (Disable_Dm-Verity_ForceEncrypt.zip) - Download
- A MicroSD card
Setup the Software/Resources:
1. Install 7zip
2. Install the Samsung USB Drivers
3. Extract Odin to a folder and put it on the Desktop
4. Extract the firmware to a folder and put it on the Desktop
In the firmware there'll be 5 files:
- BL_FIRMWAREVERSION
- AP_FIRMWAREVERSION
- CP_FIRMWAREVERSION
- CSC_OMC_OXM_FIRMWAREVERSION
- HOME_CSC_OMC_OXM_FIRMWAREVERSION (delete this one)
Delete the files starting with HOME_CSC.
5. Change the Magisk extension from .apk to .zip (Ex. Magisk_ver.apk --> Magisk_ver.zip)
6. Put the Magisk_ver.zip in the MicroSD card
7. Put the Disable_Dm-Verity_ForceEncrypt.zip in the MicroSD card as well
8. Insert the MicroSD card in the phone
Steps to Root:
NOTE: BEFORE PROCEEDING FORWARD, BACKUP YOUR DEVICE!
1. Enable Developer Options (by clicking 7 times the build number of your phone)
2. Open Developer Options and find the option OEM Unlock
3. Enable OEM Unlock (this will factory reset the phone)
- After the factory reset the OEM Unlock option will be enabled and this will allow
flashing custom recoveries and etc. to the phone.
4. After the factory reset, when the phone boots up, turn it off
5. Connect the phone to you PC/Laptop via USB cable
6. While the phone is completely turned off, hold the buttons Volume UP + Volume DOWN until Download mode shows up
7. Press Volume UP again to confirm that you'll be modifying your device
8. On your PC/Laptop open Odin
9. On the left side in Odin there are 3 tabs: Log, Options and Pit
10. Open Options and remove the checkmark on the Auto Reboot option, then go back to Log
11. In the middle of the program there are 5 slots:
- BL (Bootloader)
- AP (Application Processor)
- CP (Modem)
- CSC (Consumer Software Customization)
- USERDATA
12. Click the first slot and navigate to the location where you extracted the firmware
- The start of the names of each firmware file corresponds to the names of the slots in Odin
13. Place each firmware file in the correct Odin slot that corresponds to their names
(Ex. BL_FIRMWAREVERSION is inside the BL slot)
14. With your phone connected, press the Start button to flash the firmware
- After the firmware has been flashed successfully, your phone will be downgraded to the last security patch from 2020 which fixes possible bootloops or other issues when rooting/disabling forced encryption.
- The firmware is successfully flashed when the top left bar is green and above says PASS!
After flashing the firmware DON'T boot in Android yet!
15. After flashing, hold the Volume DOWN + Power button for around 7 seconds, immediately when the screen goes black switch to holding Volume UP + Volume DOWN
- You will enter back in Download mode
16. In Odin, press the Reset button and again uncheck Auto Restart in Options
17. In the AP slot, select the TWRP Recovery (which is in .tar archive)
18. With your phone connected to your PC/Laptop in Download mode, press Start on Odin
- This will flash the custom recovery to the phone
19. You can now disconnect the phone from your PC/Laptop
Again, after flashing the recovery, do NOT boot into Android yet!
20. After flashing the custom recovery, hold the Volume DOWN + Power button for around 7 seconds, immediately when the screen goes black switch to holding Volume UP + Power button
- This will boot the phone into the custom recovery (TWRP in this case)
22. Inside TWRP Recovery, go to Wipe, select Format Data and type 'yes' to confirm
23. After the format, go to Install, select the MicroSD card and find where you've put the Magisk_ver.zip file, select it and install it
- This will root to the device!
24. After you have installed Magisk, go back to Install, select the MicroSD card and find where you've put Disable_Dm-Verity_ForceEncrypt.zip and install it
- This will disable the forced encryption!
- If there's an error when installing the zip that says 'Failed to mount '/odm' (no such file or directory)", simply ignore it and proceed forward.
25. Go to Reboot, select System and wait around 5-10 minutes till Android fully loads
- After Android has loaded, proceed through the setup process.
26. Go to all apps and find the application called Magisk
- When you open it, it'll ask you to complete the installation of the Magisk app.
- It may also ask to reboot, to fully complete the installation.
27. After the application has been fully installed, your device will be Rooted and with disabled forced encryption!
Fix Secure Folder & Samsung Health
Note: TWRP Backup is recommended in case something fails
Samsung Health:
Required Software:
- A build.prop editor like this
Steps:
1. Install a build.prop editor from the play store
2. Give the build.prop editor root access
3. Open the editor and search for the line - ro.config.tima=1
4. Change the 1 to 0
(Ex. ro.config.tima=1 --> ro.config.tima=0)
5. Save and Reboot the device
6. After the reboot Samsung Health should work as expected
Secure Folder:
Required Software:
- Smali Patcher - Download
Steps:
2. Extract Smali Patcher.zip into a folder
3. Run as administrator
- Wait until it says 'idle..' at the bottom left of the program
4. Uncheck everything checked (like Mock locations, Mock providers, High volume warning etc.)
5. Check Samsung Knox
6. Enable USB Debugging on your phone
7. Connect your phone to your PC/Laptop
8. Press the ADB PATCH button
- A prompt will appear on your phone that asks if you allow your pc to do debugging mode operations on your phone.
9. Press allow on the prompt on your phone
- Wait until Smali Patcher is done.
- After Smali Patcher is done there should be a Magisk module inside it's folder.
10. Copy the Magisk module created by Smali Patcher to your phone
11. Open Magisk and go to Modules (the puzzle piece icon)
12. Tap on the button saying 'Install from storage'
13. Find the location where you've copied the module
14. Install the module
15. Restart your phone
16. If all done correctly, you should be able to set up and use Secure Folder
everything worked, thank you for the nice explanation and your help (A750F)
beytullahgol said:
everything worked, thank you for the nice explanation and your help (A750F)
Click to expand...
Click to collapse
Glad I could help
this one works! thx
Ive no idea which firmware link ot try
*EDIT* Im just waiting for first boot now. So far so good. IIRC first boot takes a while after all this so hopefully job done.
Thanks for guide
Ah ****e, magisk isnt working, says NO for ramdisk.
Root works though so I dunno what the craic is.
Works perfect, thanks!
Thanks, everything works perfectly.
Hello,
I have problem with:
26. Go to all apps and find the application called Magisk
Where I can find it, maybe I'm looking wrong, I can't find it. I didn't have error during install Magisk by TWRP, I don't have root device, what's going on, any can help me?
I installed the same firmware (the patch was from November 2020).
Tubeczka said:
Hello,
I have problem with:
26. Go to all apps and find the application called Magisk
Where I can find it, maybe I'm looking wrong, I can't find it. I didn't have error during install Magisk by TWRP, I don't have root device, what's going on, any can help me?
I installed the same firmware (the patch was from November 2020).
Click to expand...
Click to collapse
Did you flash Magisk v21.4 via TWRP?
Zanci19 said:
Did you flash Magisk v21.4 via TWRP?
Click to expand...
Click to collapse
Yes, I had to restart phone (or I have to longer waiting after configure and first start system)
Maybe someone will have a similar problem
5. Change the Magisk extension from .apk to .zip (Ex. Magisk_ver.apk --> Magisk_ver.zip)
Click to expand...
Click to collapse
I have to change on android (win10 I have a problem)
17. In the AP slot, select the TWRP Recovery (which is in .tar archive)
Click to expand...
Click to collapse
I selected ZIP file, not .tar
how to knw which firmware download its 2022
thanks for this guide! work well after 2 tried, also to answer the comment above me, you have to download the firmware from november 2020.
Спасибо!