Hello all, I have a big problem my phone does not work I'm completely stuck.
I explain my problem, I have no rom on my phone and usb debug is not enabled while I need it to be able to transfer a new ROM with adb push ... I can do nothing more ....
How?
Thanks
Well, do you have (access to) a computer?
If by "no adb" you were just implying that you don't have adb installed on your computer,
then see my post in this thread (or use the search option, in the first place):
http://forum.xda-developers.com/showthread.php?p=51495141#post51495141
yes but it's say no devices , because he is not in usb debug and i can't put it on because i have no rom
Voniaak said:
yes but it's say no devices , because he is not in usb debug and i can't put it on because i have no rom
Click to expand...
Click to collapse
You don't need usb debug on to use fastboot as long as you can get to bootloader mode, fastboot does not care see
http://forum.xda-developers.com/showthread.php?t=2542219 for instructions.
Go buy a new Moto G and don't bother doing stuff you don't understand even remotely.
Voniaak said:
yes but it's say no devices , because he is not in usb debug and i can't put it on because i have no rom
Click to expand...
Click to collapse
It's all there, dude..
You guys just save my phone thank you really :laugh: :good:
Related
hi... I'm facing a problem in Unlocking bootloader.. I've done exactly everything as mentioned on htcdev site like checking usb debugging and connecting phone to pc through usb in fastboot mode.. but after writing the command fastboot oem get_identifier_token , it just showing waiting for device nothing else for several of hours.. pls tell me what I;m doing wrong... kindly reply me at [email protected]. thanks/... if u have replied here kindly also remind me in the mail .. waiting for ur reply.
aakash.mehra said:
hi... I'm facing a problem in Unlocking bootloader.. I've done exactly everything as mentioned on htcdev site like checking usb debugging and connecting phone to pc through usb in fastboot mode.. but after writing the command fastboot oem get_identifier_token , it just showing waiting for device nothing else for several of hours.. pls tell me what I;m doing wrong... kindly reply me at [email protected]. thanks/... if u have replied here kindly also remind me in the mail .. waiting for ur reply.
Click to expand...
Click to collapse
Have you installed the necessary drivers properly(You can check it in device manager). If not install it and try it again.
Solid Mercury said:
Have you installed the necessary drivers properly(You can check it in device manager). If not install it and try it again.
Click to expand...
Click to collapse
Thanks for replying..
yes I've installed all necessary drives. every thing is working like mass storage, usb tathering and internet pass through.
main problem persists during cmd procedure.
initially I on the phone after checking usb debugging in recovery mode then I select fastboot.
and when i type fastboot oem get_identifier_token and i press enter and result comes in waiting for device .
Nothing else came.
I don't know what to do
aakash.mehra said:
Thanks for replying..
yes I've installed all necessary drives. every thing is working like mass storage, usb tathering and internet pass through.
main problem persists during cmd procedure.
initially I on the phone after checking usb debugging in recovery mode then I select fastboot.
and when i type fastboot oem get_identifier_token and i press enter and result comes in waiting for device .
Nothing else came.
I don't know what to do
Click to expand...
Click to collapse
download and install htc sync..
Without it the main driver will not install ..I think it will work..
Press Thanx button it appreciates me..
aakash.mehra said:
Thanks for replying..
yes I've installed all necessary drives. every thing is working like mass storage, usb tathering and internet pass through.
main problem persists during cmd procedure.
initially I on the phone after checking usb debugging in recovery mode then I select fastboot.
and when i type fastboot oem get_identifier_token and i press enter and result comes in waiting for device .
Nothing else came.
I don't know what to do
Click to expand...
Click to collapse
Uninstall HTC sync (app) in ur phone. I think it is just sync not the HTC sync. I don't have stock rom now to check the exact name.
Hi guys,
i have a tricky problem.
I bought a used nexus S, without any hope to recover it.
This is the state at the moment (after installed SDK and drivers).
I think the device is in his standard state (all locked up, never rooted, stock rom)
It boot up and ask for a password to encrypt device (works : volume and emergency call).
If i connect usb, he tries to mount USB storage but he dosen't success.
I connect to pc and pc see an Android ADB device in the devices list.
BUT if i lauch 'adb devices' i dont see anything.
I start it in bootloader mode (Vol Up + Power) ... it starts.
BUT Vol Up and Vol down didn't work. I can only press power and return again in bootloader. (volume work if i normally boot)
In bootloader state i tried 'fastboot devices' and i didn't see any device.
So the state is :
Bootloader i think "broken" (volumes dosen't work and fastboot dosen't see device)
Debug usb disabled (adb don't see my device)
Device encrypted
Any idea ?
I think is a nice problem to let your brain works on :laugh::laugh:
Thanks in advice.
Daniele
Hey guys, there is anybody out there ?
I dont think that no one could try to solve this problem.
Thanks
Do you have the drivers installed onto your PC? You will need to get the adb drivers and fastboot drivers. Download Samsung Kies and that will take care of your ADB drivers. Click here: http://www.mediafire.com/download/5a7gou9droidi53/drivers.rar for your fastboot drivers. Hope this helps.
I've already installed drivers.
But i will give a try to the ones you linked.
Thanks you.
sirhaplo said:
I've already installed drivers.
But i will give a try to the ones you linked.
Thanks you.
Click to expand...
Click to collapse
I'd suggest just booting Linux and doing whatever you need to do in there.
The kernel already supports communicating with the Nexus S, no need to mess with drivers like on Windows.
Hey guys, i have the following problem.
So I want to unlock the bootloader of my Moto G but to do that I must use USB debugging. But if I use the command "adb devices" it gets always shown as offline. So I did a little research and found out, that since 4.4.2 a Pop-Up should show up to allow USB debugging with the connected PC.
Problem is this Pop-Up won't show up...
Could you please help me. I couldn't find a solution. Really frustating
Have you enabled USB debugging in Developer Options in settings?
Sent from my XT1032 using Tapatalk
Of course I did ^^
battlemaxi said:
Hey guys, i have the following problem.
So I want to unlock the bootloader of my Moto G but to do that I must use USB debugging. But if I use the command "adb devices" it gets always shown as offline. So I did a little research and found out, that since 4.4.2 a Pop-Up should show up to allow USB debugging with the connected PC.
Problem is this Pop-Up won't show up...
Could you please help me. I couldn't find a solution. Really frustating
Click to expand...
Click to collapse
For my XT1031, I had to use the Motorola USB drivers for ADB to work, and Kush's Universal ADB drivers for Fastboot to work.
And if you are using Windows 8/8.1, then you have to disable to forced signature verification in order to install the Universal ADB drivers.
Also, for ADB to work in Windows, I had to set the phone's USB computer connection to Camera (PTP), instead of Media Device.
I'm using Motorolas Drivers. I downloaded them from the official website.
My ADB is also on the latest version (1.0.3.1). Also tried to factory reset my phone. Nothing works, the pop-up wont show up...
battlemaxi said:
I'm using Motorolas Drivers. I downloaded them from the official website.
My ADB is also on the latest version (1.0.3.1). Also tried to factory reset my phone. Nothing works, the pop-up wont show up...
Click to expand...
Click to collapse
Dude, you need to follow the instructions step by step and provide more info about what's going on.
1. Is your "Enable ADB debugging" enabled? You said yes.. does your phone show "Android debugging enabled" icon when you plug it into your computer? If not, you don't have it enabled !
2. If you see the notification, go to Device Manager (hope you are using Windows, or I can't really help you), then can you find your device there? If the USB drivers are installed correctly, then you should see "Android Device" then a "Motorola ADB Interface" inside it. If not, you will see a yellow exclamation with something like "Motorola device"..
3. Did you change your phone's USB computer connection to Camera (PTP)??
If adb says that the device is "offline" but you see its ID, then you didnt authorize (on the phone) the pc to access USB Debugging, its a new feature of 4.4.When you connect your phone, a prompt should appear (check the status bar if it doesnt), saying a computers with RSA Key XX:XX:XX:XX:XX:XX:XX requested access to USB Debugging.
good luck
First of thanks for your help, much appreciated
1. Yes I have USB debugging enabled. If I plug in my Moto G a icon appears in the Notification-Center which says "USB debugging activated"
2. Yes if I go into the Device Manager I can see Android Device
3. Yes I ded change my USB-Setting to PTP
Any other ideas ?
battlemaxi said:
First of thanks for your help, much appreciated
1. Yes I have USB debugging enabled. If I plug in my Moto G a icon appears in the Notification-Center which says "USB debugging activated"
2. Yes if I go into the Device Manager I can see Android Device
3. Yes I ded change my USB-Setting to PTP
Any other ideas ?
Click to expand...
Click to collapse
Actually you do not need adb to unlock the bootloader only mfastboot which does not need adb to work all you do is boot into the bootloader then follow this
http://forum.xda-developers.com/showpost.php?p=47705438&postcount=6
liveroy said:
If adb says that the device is "offline" but you see its ID, then you didnt authorize (on the phone) the pc to access USB Debugging, its a new feature of 4.4.When you connect your phone, a prompt should appear (check the status bar if it doesnt), saying a computers with RSA Key XX:XX:XX:XX:XX:XX:XX requested access to USB Debugging.
good luck
Click to expand...
Click to collapse
As mentioned above (first post of the thread) I know that I gotta allow my PC to connect properly to the phone. But the problem is that pop-up thingy wont show up. So I'm not able to allow USB debugging for my PC...
robin0800 said:
Actually you do not need adb to unlock the bootloader only mfastboot which does not need adb to work all you do is boot into the bootloader then follow this
http://forum.xda-developers.com/showpost.php?p=47705438&postcount=6
Click to expand...
Click to collapse
Everytime I try to do this i get the errormessage, that those commands or not known even if I'm at the right folder with the fastboot.exe within it. Because of that I thought I would need the connection to be online (I'm kinda new to all of this ).
battlemaxi said:
As mentioned above (first post of the thread) I know that I gotta allow my PC to connect properly to the phone. But the problem is that pop-up thingy wont show up. So I'm not able to allow USB debugging for my PC...
Everytime I try to do this i get the errormessage, that those commands or not known even if I'm at the right folder with the fastboot.exe within it. Because of that I thought I would need the connection to be online (I'm kinda new to all of this ).
Click to expand...
Click to collapse
Just follow those instructions to the letter and any thing you don't understand or get an error message report back here
battlemaxi said:
First of thanks for your help, much appreciated
1. Yes I have USB debugging enabled. If I plug in my Moto G a icon appears in the Notification-Center which says "USB debugging activated"
2. Yes if I go into the Device Manager I can see Android Device
3. Yes I ded change my USB-Setting to PTP
Any other ideas ?
Click to expand...
Click to collapse
Hmmm... so.. what do you see when you type "adb devices" ?
Also, in your Device Manager, is the Motorola ADB interface properly installed? (no issues)?
And yes, to unlock the bootloader you just need Fastboot... when you boot to Fastboot and type "fastboot devices" do you see anything?
Okay, I will Unlock my Bootloader tomorrow but I would like to fix this issue, because I might encounter it in the future :/
battlemaxi said:
Okay, I will Unlock my Bootloader tomorrow but I would like to fix this issue, because I might encounter it in the future :/
Click to expand...
Click to collapse
Well, are you sure you fastboot works?
If so, it's very weird why adb won't...
And yeah, ADB is very useful... if not lifesaving...
Okay I'm sure fastboot works, cause I just unlocked my phone. So got anyone any ideas how I could Allow USB debugging ? :/
battlemaxi said:
Okay I'm sure fastboot works, cause I just unlocked my phone. So got anyone any ideas how I could Allow USB debugging ? :/
Click to expand...
Click to collapse
Can you see adb in the computer device manager program
battlemaxi said:
Okay I'm sure fastboot works, cause I just unlocked my phone. So got anyone any ideas how I could Allow USB debugging ? :/
Click to expand...
Click to collapse
Couldn't wait till tomorrow to unlock the bootloader huh?
Hmm... Did you use the Motorola USB drivers from the Motorola Device Manager 2.4.5?
And everything is properly installed in Device Manager? No devices with yellow exclamation?
And ADB devices shows no list of devices attached?
So weird...
battlemaxi said:
As mentioned above (first post of the thread) I know that I gotta allow my PC to connect properly to the phone. But the problem is that pop-up thingy wont show up. So I'm not able to allow USB debugging for my PC...
Everytime I try to do this i get the errormessage, that those commands or not known even if I'm at the right folder with the fastboot.exe within it. Because of that I thought I would need the connection to be online (I'm kinda new to all of this ).
Click to expand...
Click to collapse
You can revoke all authorized devices for adb access.The option is right below the USB Debugging switch in Developer Options.
Then reboot your moto g and try again.
liveroy said:
You can revoke all authorized devices for adb access.The option is right below the USB Debugging switch in Developer Options.
Then reboot your moto g and try again.
Click to expand...
Click to collapse
Even if you revoke, you should see the device listed if you run "adb devices"...
neozen21 said:
Couldn't wait till tomorrow to unlock the bootloader huh?
Hmm... Did you use the Motorola USB drivers from the Motorola Device Manager 2.4.5?
And everything is properly installed in Device Manager? No devices with yellow exclamation?
And ADB devices shows no list of devices attached?
So weird...
Click to expand...
Click to collapse
Nope
I guess I have the newest Version, cause I downloaded it from Motorola.com
Yes everything is working no yellow thingys what so eher..
If I use the 'ADB devices' command the ID of my device shows up but as already mentioned it's offline.
Gesendet von meinem XT1032 mit Tapatalk
Can someone please send me the link to download the adb tools for cyanogen mod 11(android 4.4.4)......because each time I connect the phone to my pc It says ADB devices offline...I've also updated my Android SDK. Can someone give me proper solution for this. My device Sony Xperia L.
unleashed_epicness said:
Can someone please send me the link to download the adb tools for cyanogen mod 11(android 4.4.4)......because each time I connect the phone to my pc It says ADB devices offline...I've also updated my Android SDK. Can someone give me proper solution for this. My device Sony Xperia L.
Click to expand...
Click to collapse
First of all, do you have usb debugging enabled in your developer options. It's just to check because it wont work without them
TechMinerUK said:
First of all, do you have usb debugging enabled in your developer options. It's just to check because it wont work without them
Click to expand...
Click to collapse
Yes obviously
unleashed_epicness said:
Yes obviously
Click to expand...
Click to collapse
Okay, sorry about it being obvious but you would be suprised at some people.
So second, do you have the Sony Xperia L ADB drivers installed
TechMinerUK said:
Okay, sorry about it being obvious but you would be suprised at some people.
So second, do you have the Sony Xperia L ADB drivers installed
Click to expand...
Click to collapse
yep
unleashed_epicness said:
yep
Click to expand...
Click to collapse
When you plugged it into your PC for the first time did it come up with a message to accept an RSA key?
(Sorry if this seems dumb but I need to know to help)
TechMinerUK said:
When you plugged it into your PC for the first time did it come up with a message to accept an RSA key?
(Sorry if this seems dumb but I need to know to help)
Click to expand...
Click to collapse
yep...and I forgot mention that when I switch back to 4.2.2 Rom......adb works fine.(my adb version is 1.0.31)
unleashed_epicness said:
yep...and I forgot mention that when I switch back to 4.2.2 Rom......adb works fine.(my adb version is 1.0.31)
Click to expand...
Click to collapse
Ahh then you had same issue as me with Moto G, when you plug in yout phone into PC switch it to the camera transfer mode. It should work as for some reason theirs an issue with ADB at the moment in CM on some phones
TechMinerUK said:
Ahh then you had same issue as me with Moto G, when you plug in yout phone into PC switch it to the camera transfer mode. It should work as for some reason theirs an issue with ADB at the moment in CM on some phones
Click to expand...
Click to collapse
when I connect it in camera mode ...it shows no devices attached in adb. I actually use adb for reverse tethering my pc's internet connection to my phone. I don't use a wifi router hence its the only source for me to connect to the internet...........Did you get a fix for your moto g??
unleashed_epicness said:
when I connect it in camera mode ...it shows no devices attached in adb. I actually use adb for reverse tethering my pc's internet connection to my phone. I don't use a wifi router hence its the only source for me to connect to the internet...........Did you get a fix for your moto g??
Click to expand...
Click to collapse
Yes, I used camera mode and then installed my Moto G ADB drivers and it worked.
Also try this if mine did not work: http://forum.xda-developers.com/xperia-l/help/solved-xperia-l-drivers-adb-problems-t2493042
some universal tools and drivers http://adbdriver.com/upload/AdbDriverInstaller.exe
https://docs.google.com/file/d/0B1S0LCuXCnnmSWh6NGJmSE1BUWc/edit
#1- I have the LEO-BX9 and can not get it to connect to a computer via USB regardless what I try. The computer does not even acknowledge anything is connected when I plug in the charger with the watch. I have tested the charging cable and every connection is working fine (no broken wire or issues detected). I've tried on multiple computers with multiple OS and nothing.
#2- There is no option in Developer Options for "Debug by usb" it only has Debug by wifi or bluetooth.
I have been able to connect adb via wifi, and can send commands, but when i reboot into bootloader, it obviously loses wifi connectivity and I cant send any fastboot commands, and can not communicate at all with the watch. As such, I can not unlock or do anything.
I appreciate any help you can offer and thank you in advance for your awesomenes!
I guess my ultimate question is, How do I get a custom ROM on this watch without being able to connect while in stock bootload? Can I push a file over with ADB and use it somehow to install the custom ROM as a fake update or recovery. Can i unlock somehow. Anything? I beg help from you oh wise and kind xda'ers
extremegraphic said:
I guess my ultimate question is, How do I get a custom ROM on this watch without being able to connect while in stock bootload? Can I push a file over with ADB and use it somehow to install the custom ROM as a fake update or recovery. Can i unlock somehow. Anything? I beg help from you oh wise and kind xda'ers
Click to expand...
Click to collapse
change charger to a different one
Mira444 said:
change charger to a different one
Click to expand...
Click to collapse
Did that also... Still no option for USB debug and watch is not recognized by any device connected by usb.
Just looking for some way to load any custom ROM without usb. Anyone?