Database Info

the v6 supercharger

ok so i know theres a thread out there in the dev section but this one is for noobs like me.
first i take no credit for.please head over to the original thread to thank zeppelinrox.http://forum.xda-developers.com/showpost.php?p=18703418&postcount=5021
1. download the script - http://forum.xda-developers.com/showpost.php?p=18703418&postcount=5021
2. download busybox.install it. https://play.google.com/store/apps/details?id=stericson.busybox&hl=en
3. install script manager - https://play.google.com/store/apps/details?id=os.tools.scriptmanager&hl=en
(IF YOU HAVE A DOUBT OF BUSYBOX RUN "SUPERCHARGER STARTER KIT" IN SMANAGERrun the script as root.http://forum.xda-developers.com/showpost.php?p=18703418&postcount=5021
4.open the script manager.search for the script.run it.first tap the green skull to run as root. then tap to run as script.look at the attached screenshot 2.
5.the script will verify your busybox .the script will proceed as given in screenshot3.
6.now the script will guide you. just remember to select the
a)lock home in memory - no
b)scroll speed 1
c)local prop over build prop
d)die hard launcher
e)soft rock.
7.after everything is completed the device will reboot
8. open sn manager again navigate to v6 supercharger script run 99supercharger as root and at boot(important)boot option beside the "run as root option". so done!!!
9.now again run the original v6 script.as it runs there is a "driver console".
10. select the third slot for 500mb ram.there are three options - unleded ,leded.select the one you prefer (multitasking - least minfree values, aggressive - highest minfree values etc)
11.select the "engine flush"option after you complete the above step(just type the appropriate numerical corrosponding to the option)
12.select "detailing" and run it.
13.when you run the script theTHIRD time after this, at the end it will show 100% supercharged.if not,tweak various values in the drivers console.eg- bulletproof apps,etc.
14.as a last ,create a widget for "engine flush". run it ONCE every 3-4 hours.
15.run the detailing once a week.
16.done!!!!oh and try out various other options in the drivers console!!!
RISK - none.just install the latest busybox.if you get "operand"error.check busybox(atleast 1.19.x)

Wow....
Exactly this is waht i wanted....!!
I ran the script but only script run and no options as you told like driver selections and all.
So I am going for the same again exactly the way you mentioned.
By the way which version to run, RC11 or RC9
I am on JB alpha2
By dhiru
Sent from my GT-I9003 using xda premium

Rc 11 as in screen shots.in addition jb require s to patch a services.jar file.I advice u to check original thread
Sent from my GT-I9003 using xda app-developers app

Is there any way to remove current v6 charge from my device....i have to do charging again from scratch
Sent from my GT-I9003 using xda premium

shail139 said:
Is there any way to remove current v6 charge from my device....i have to do charging again from scratch
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
Charging? Anyway in drivers console there is an option to .'unsupercharge'
Sent from my GT-I9003 using xda app-developers app

Why do i need this ?
Im on RemICS V1.7
Sent from my GT-I9003 using Tapatalk 2

the orig thread is super messed up :/ can you explain how you patched your services.jar? surely there must be a better way than the explanation during install :-/
Sent from my GT-I9003 using xda app-developers app

jan3586 said:
the orig thread is super messed up :/ can you explain how you patched your services.jar? surely there must be a better way than the explanation during install :-/
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
GO to http://android.mimic.ca/
upload your service.jar
wait for sometime till it uploads and confirms your device...
download the patched services.jar
flash it in CWM or replace the existing services.jar by the modded one that u have downloaded !! :highfive:

loneagl said:
Charging? Anyway in drivers console there is an option to .'unsupercharge'
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
I dont know why...I am unable to reach driver console
Sent from my GT-I9003 using xda premium

And then ?!!!!!!
Edit: in 1st step.. which files shall i download ? In the other OP there are Zillion files !
Hopefully worth it !
Sent from my GT-I9003 using Tapatalk 2

Jordanyme said:
And then ?!!!!!!
View attachment 1394594
Sent from my GT-I9003 using Tapatalk 2
Click to expand...
Click to collapse
Now scroll up a little to the drivers console.from the third slot for 512 mb select any of three options (leaded, unleaded).I advice u to select balanced.now select nitro lag nullifier.its somewhere down.run the bulletproof apps that you wasn't to keep in memory.
Notice that you are 0% supercharged? After doing the above procedure u will go to 75_100% supercharged.
Oh bu can pies that thanks byron
Sent from my GT-I9003 using xda app-developers app

loneagl said:
Now scroll up a little to the drivers console.from the third slot for 512 mb select any of three options (leaded, unleaded).I advice u to select balanced.now select nitro lag nullifier.its somewhere down.run the bulletproof apps that you wasn't to keep in memory.
Notice that you are 0% supercharged? After doing the above procedure u will go to 75_100% supercharged.
Oh bu can pies that thanks byron
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
I actually didn't see any 512 mb option ... i followed up the instructions with a rufly (random) answers and got it 75% supercharged
Why/how/what i did...just dont know
Sent from my GT-I9003 using Tapatalk 2

Jordanyme said:
I actually didn't see any 512 mb option ... i followed up the instructions with a rufly (random) answers and got it 75% supercharged
View attachment 1394680
Why/how/what i did...just dont know
Sent from my GT-I9003 using Tapatalk 2
Click to expand...
Click to collapse
As you can see you can still run the bullet proof apps/nitro lag nullifier.keep a widget for engine flash on home screen and run out every 3 _4 hours.
Did I help you? Please thank me !!

Jordanyme said:
I actually didn't see any 512 mb option ... i followed up the instructions with a rufly (random) answers and got it 75% supercharged
View attachment 1394680
Why/how/what i did...just dont know
Sent from my GT-I9003 using Tapatalk 2
Click to expand...
Click to collapse
Sorry.I meant 512 hp
Did I help you? Please thank me !!

simratcs said:
GO to http://android.mimic.ca/
upload your service.jar
wait for sometime till it uploads and confirms your device...
download the patched services.jar
flash it in CWM or replace the existing services.jar by the modded one that u have downloaded !! :highfive:
Click to expand...
Click to collapse
mimic.ca hasn't been updated so it's lacking all the newest stuff and doesn't work at all on Jelly Bean.
The windows exe is very easy tho.
It will do everything - pull services.jar from they phone via adb, patch it according to your preferences, and install it.
You can get it here http://goo.gl/OfOOE
You still need to use the V6 SuperCharger script a usual - just don't try to patch it with the ICS service centre after it's already been patched with the windows tool.

Jordanyme said:
And then ?!!!!!!
View attachment 1394594
Edit: in 1st step.. which files shall i download ? In the other OP there are Zillion files !
Hopefully worth it !
Sent from my GT-I9003 using Tapatalk 2
Click to expand...
Click to collapse
At this point u type 17 for enginge flush
Again it will ask u to do same after some more steps
Then type 32 for a superclean install !!
And then u will reboot
Sent from my GT-I9003 using xda app-developers app

Wow....I'm 100percent supercharged....cool... and I can feel the difference . :thumbup:
Sent from my GT-I9003 using xda app-developers app

Omg solo much lag when I use it for an hour. It lags solo much that I can't open the script to do engine flush....then I have to reboot to stop the lag.BTW I'm 100 percent supercharged!
Sent from my GT-I9003 using xda app-developers app

mathew1234 said:
Omg solo much lag when I use it for an hour. It lags solo much that I can't open the script to do engine flush....then I have to reboot to stop the lag.BTW I'm 100 percent supercharged!
Sent from my GT-I9003 using xda app-developers app
Click to expand...
Click to collapse
Unsupercharge-it's in the drivers console.then run the script using 'leded'min free values.select 'soft rock kernel'
Sent from my GT-I9003 using xda app-developers app

is it compatible with jelly bean?

[DEV][TOOL] Kernel Tool Version 3 [22-5-2013]

Hey everyone !
I just made a simple tool for unpacking and packing kernels for Linux using bash scripts ..
Maybe helpful for start up devs and others alike !
I hope this tool will be beneficial to devs / kernel devs / ROM devs too.. for cutting down the time in typing a lot of stuff.
#include<disclaimer.h>
NOTE : Keep a backup of your kernel / boot.img always in hand.. I am not responsible for bootloops. Whatever you do.. Its your responsiblity. If you point a finger at me.. I will laugh at you !
Click to expand...
Click to collapse
How to use this tool ??
Download the zip !
Extract it to the suitable directory.
Copy boot img too the directory.
Open terminal.
Change directory to kernel tools directory.
Run init.sh only if your running the script for the first time!​
Type code :
Code:
./init.sh
Now tool is configured !
To extract boot.img :
Code:
./unpack.sh
To repack boot.img :
Code:
./pack.sh
To start from fresh again for new kernel build :
Code:
./fresh.sh
I am adding a blank zip to flash any kernel:
Just add modules to system > lib > modules
and add boot img to the zip along with meta-inf folder and system folder .
Hope this helps the whole community !
Those who have issues with " Permission denied problems " ... Right click on the .init.sh and give it suitable permissions.. or do a chmod +x on init.sh and then run it..
Kernel Tool Version 2 !
With new GUI and no hassles !
Worth a try View attachment K-EX-2.zip
New version : Version 3

Great Work Mate :good::good:

Re: [DEV][TOOL] Kernel Tool [19-3-2013]
Nice trick Will be helpful altrough, I actually have it for myself already

Re: [DEV][TOOL] Kernel Tool [19-3-2013]
galaxyfreak said:
Nice trick I actually have it for myself already
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
+1 hope it helps those who can't do it / don't know about it . cheers..
Sent from my Nexus 7 using xda app-developers app

nice work released just in time needed it for my work tested and worked good

Re: [DEV][TOOL] Kernel Tool [19-3-2013]
Thanks brother...
Had to use dsi xda kitchen only for unpacking kernels..
This tool will save some time..
Sent from my HTC Explorer A310e using xda app-developers app

What I was searching for, Thanks :good:

View attachment K-EX-2.zipUpdate ! New UI and feature and fixed old bugs ! Thanks Vineeth for informing me about the bug .

If I wasn't limited to 8 thanks a day...
Sorry guys, but, this tool is recommended for everyone, dev and n00b alike...
Dev's may like to use commands, but newbies, take some time to learn...
This tool, makes your work easier, and faster...
p.s. use the original commands twice-thrice to get the flow of it... then, consider using this tool

Re: [DEV][TOOL] Kernel Tool Version 2 [31-3-2013]
For changing ramdisk(cm9 to 10/10.1etc. ) ~after boot.img split into kernel and ramdisk.cpio.gz,
Is it enough to replace the ramdisk.cpio.gz from the older working one without opening ramdisk.cpio.gz/messing with it?
LâTêS†↭ⓛⓘⓝⓚⓢ™CM10 HTC A310E.
If I haven't given you link, it's above. Just click it

Re: [DEV][TOOL] Kernel Tool Version 2 [31-3-2013]
Yeah that's fine.. no need to open and unpack it ..
Ps newer version has a kernel Porter.. just name the kernel as instructed in the tool it automatically ports the kernel according to what you want to do .. from boot Img to boot IMG..
And for the kernel devs from a new zimage to another bootimg from which ramdisk is req
Newer tool took a really long time to type .. lol no response (
Sent from my HTC Explorer A310e using xda app-developers app

Re: [DEV][TOOL] Kernel Tool Version 2 [31-3-2013]
akshat.shenoy said:
Yeah that's fine.. no need to open and unpack it ..
Ps newer version has a kernel Porter.. just name the kernel as instructed in the tool it automatically ports the kernel according to what you want to do .. from boot Img to boot IMG..
And for the kernel devs from a new zimage to another bootimg from which ramdisk is req
Newer tool took a really long time to type .. lol no response (
Sent from my HTC Explorer A310e using xda app-developers app
Click to expand...
Click to collapse
Actually, the newer version didn't have init.sh ...is that ok?
And I can't probably use any of that stuff.. so can't report on that (coz I burnt my PC some time back ~literally )
LâTêS†↭ⓛⓘⓝⓚⓢ™CM10 HTC A310E.
If I haven't given you link, it's above. Just click it

Re: [DEV][TOOL] Kernel Tool Version 2 [31-3-2013]
ptcpayme said:
Actually, the newer version didn't have init.sh ...is that ok?
And I can't probably use any of that stuff.. so can't report on that (coz I burnt my PC some time back ~literally )
LâTêS†↭ⓛⓘⓝⓚⓢ™CM10 HTC A310E.
If I haven't given you link, it's above. Just click it
Click to expand...
Click to collapse
No need for that.. As I have simplified everything into a single persistent menu based GUI... Just needs a chmod +x in case it doesn't run..
Sent from my Nexus 7 using Tapatalk HD

:good:
Nice work.. Works perfectly..

:good::good: +1 mate

Too good man!! Keep up the awesome work!!:thumbup:
Sent from my HTC Explorer using xda premium

New Version
Hey.
Here is a new version of kernel tool by me...
Source : Here Github
Source : Here Google Code
How to Install?
Download as zip from Here
OR
Code:
git clone [email protected]:russelldias98/Kernel-Tool.git
Instructions Here
Changes : made a script to make a flashable zip and changed UI a bit
Preparing a new GUI Version
Thank you!

Great job
Sent from my ST21i2 using Tapatalk 2

Random questions thread

N00b asks dev answers: D
Any question here, but not too many at once
Maybe this makes the section more tidy
Sent from my LG-P920 using xda app-developers app

Thank you very much berni for this idea !!
You have been an RC , so you should help us .
1-What' the recovery partion in the Official ICS and GB ?? mmcblk0p** (Since I don't have this phone I can't know them) .
2-I have followed your Tutorial to edit LG's firmware ,, but in the step when root the *.img file , how to return that image into *.bin ??
3-How to replace recovery like what xbsall did (in bootv21e.bin) ??
4-In V20a.kdz of P880 Optimus 4X ,, when I run :-
Code:
LGExtract -kdz ****.kdz
Then I get a *.cab file ,, extract it then find a *.DZ ?? In P920 kdz I find *.wdb (then extract it into *.bin) .
Thank you berni for your support to LG-P920 and for this EXCELLENT idea .
#------------------------------------------
echo "Sender.product.model=LG-P880" # (O4X) .
if [ $thanks -eq $pressed ] ; then
thanks_meter=$((${thanks_meter} + 1)) ; fi #Press it

OS_Hacking said:
Thank you very much berni for this idea !!
You have been an RC , so you should help us .
1-What' the recovery partion in the Official ICS and GB ?? mmcblk0p** (Since I don't have this phone I can't know them) .
2-I have followed your Tutorial to edit LG's firmware ,, but in the step when root the *.img file , how to return that image into *.bin ??
3-How to replace recovery like what xbsall did (in bootv21e.bin) ??
4-In V20a.kdz of P880 Optimus 4X ,, when I run :-
Code:
LGExtract -kdz ****.kdz
Then I get a *.cab file ,, extract it then find a *.DZ ?? In P920 kdz I find *.wdb (then extract it into *.bin) .
Thank you berni for your support to LG-P920 and for this EXCELLENT idea .
#------------------------------------------
echo "Sender.product.model=LG-P880" # (O4X) .
if [ $thanks -eq $pressed ] ; then
thanks_meter=$((${thanks_meter} + 1)) ; fi #Press it
Click to expand...
Click to collapse
1. In all o3d partitions layout it's mmcblk0p6
2. Just open the edited img in hexeditor select everything copy it then select in the bin from offset to size off given by the extract tool and then paste it in there
3. Same as above open rec.img in hex editor select and delete the recovery file in the bin(everything is given by the extract tool) and paste in the new rec
4. Don't know much about dz files but take a look in l9/7/6 not sure which one there's a kdz Rom and the guy linked to a tool which extracts dz files if I remember right
Found it http://forum.xda-developers.com/showthread.php?p=2985403
Sent from my LG-P920 using xda app-developers app

How do I stop my recovery from creating an md5 sum when making a backup of a ROM?

Warren488 said:
How do I stop my recovery from creating an md5 sum when making a backup of a ROM?
Click to expand...
Click to collapse
I'm no dev but in TWRP you can unchek the option for the backup to make md5..
I don't remember for CWM..
Sent from my LG-P920 using xda app-developers app

Warren488 said:
How do I stop my recovery from creating an md5 sum when making a backup of a ROM?
Click to expand...
Click to collapse
It's to check if your backup is corrupted and to save you from unnecessary reflashing. If you're not planning to modify your backup , you should't disable it.
Sent from my LG-P920 using xda premium

2 questions
1. how can i solve graphic driver bug in cm10?
in cm10.1 i can solve it by installing peach kernel.. cm10 version still has this bug..
2. I've SD card problem in cm10.1 sometimes i must remount it to use gallery and camera..(i already changed 16 to 15)

Im having issues flashing the V30a kdz the way i used to, after uncompressing the kdz the program looses connection with the phone, never happenned before now it does even on different Pc's. Any ideas?
Sent from my LG-P920 using xda app-developers app

SickRaider said:
Im having issues flashing the V30a kdz the way i used to, after uncompressing the kdz the program looses connection with the phone, never happenned before now it does even on different Pc's. Any ideas?
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
Look a bit in the forum you have to rename it or extract it to bin and baseband and flash it
Sent from my LG-P920 using xda app-developers app

berni987654321 said:
Look a bit in the forum you have to rename it or extract it to bin and baseband and flash it
Sent from my LG-P920 using xda app-developers app
Click to expand...
Click to collapse
Stupid me...... yeah i forgot about that, i did that on 28b..... Thanks Bernie.
Sent from my LG-P920 using xda app-developers app

Berni, there's a few developer-related questions I wanna ask before I develop my first Android firmware ROM.
1. Is even a Java file context-sensitive? And if it is, should a simple change be checked against the other source that links to it?
2. Is it difficult to add in some framework / library outside the Android source codes?
Sent from my LG-P920 using XDA

Dr. Mario said:
Berni, there's a few developer-related questions I wanna ask before I develop my first Android firmware ROM.
1. Is even a Java file context-sensitive? And if it is, should a simple change be checked against the other source that links to it?
2. Is it difficult to add in some framework / library outside the Android source codes?
Sent from my LG-P920 using XDA
Click to expand...
Click to collapse
To 1 no but most libraries are built of pretty much code (libwebcore is some gigs big) and are difficult to port to other android version(opposite is libwebcore which is pretty easy). Many libs should work on same android versions but many don't
Sent from my LG-P920 using xda app-developers app

Ah, I see. I will have to check against each other before I start compiling. Thanks, Berni.
Sent from my LG-P920 using XDA

[Guide] [How to] Run windows or mac os on your android.[no root needed]

Hi friends,
This is a guide that help you to run the windows on your android phone.
.
I have tested this by myself using a low end arm6 600mhz with 256Mb ram qvga (240x320) display device and a high end 1.5Ghz phone with 1 Gb ram and 720p display.
Both works well( It took about 5min to boot ) So this will work on almost every android device.
.
Just download the file using the link, extract the SDLApp.apk and install it.
.
Then extract the SDL folder to the root On your phone. (mnt/sdcard/here)Then you're done !!!
.
Open the app "lib sdl"and wait...(may take about 1~20 min to boot into win95)
.
If you want to try to run applications or
access your SD Card within windows create a
folder called HDD in the root of your SDcard
and put whatever you want in there.You can use that foldr as your Hard disk.
.
Ok enjoy !!!
.
Link-(55mb)
http://www.mediafire.com/download/8m9jooa00gqjdfz/qemu.zip

Run windows 1 on your android.
Have you ever used windows one?
Try it on your phone.
.
You have to download " AnDOSbox "or "aDosBox" from play store.
.
Download windowsone.img
.
Place it in root of your sdcard (mnt/sdcard/here)
.
Open AnDOSbox/aDosBox app.
.
Type command "boot windowsone.img"
and press enter button.
.
Enjoy...
.
Leave me a small thank also

Run old mac os on your phone
Updating post
Place the file "vMac.ROM" in "minivmac" directory in your SD Card.
Disk images should have .img or .dsk
extensions, and be located in "minivmac"
directory in your SD Card for them to show up
in the disk chooser.
Leave me a small thank also

Is this a real windows OS (like the wing-lunix project for htc wm phones)?.. can I install .exe apps?
Sent from my GT-I9003 using xda premium

ASMI1 said:
Is this a real windows OS (like the wing-lunix project for htc wm phones)?.. can I install .exe apps?
Sent from my GT-I9003 using xda premium
Click to expand...
Click to collapse
Yes of corse why not ?
this is real pc os and the emulator, "lib sdl"
runs it. (not like wing-lunix)
Thay are real you can install exe (haven't tested but should work) The only problem is its slow.

After installing windows can I come back to my original os?????
Sent from my GT-S7562 using xda app-developers app

tajammul1996 said:
After installing windows can I come back to my original os?????
Sent from my GT-S7562 using xda app-developers app
Click to expand...
Click to collapse
This is an emulator, it does not replace any operating system, plus this is for android only.

Is it smooth or veeeeeery laggy?

Can I run .exe files?
Sent from my GT-S7562 using xda app-developers app

damnnew said:
Is it smooth or veeeeeery laggy?
Click to expand...
Click to collapse
depend on the phone ! faster phones faster emulate
tajammul1996 said:
Can I run .exe files?
Sent from my GT-S7562 using xda app-developers app
Click to expand...
Click to collapse
yes,make a folder called HDD in sdcard and put the apps that you want to try.
tajammul1996 said:
After installing windows can I come back to my original os????
Sent from my GT-S7562 using xda app-developers app
Click to expand...
Click to collapse
It dosdn't replace your rom (original os ) so try without any fear.

I will test it and report back...thanks for the share bro

I confirm this is working on GT-I9003 and 100% safe...thanks bro

ASMI1 said:
I confirm this is working on GT-I9003 and 100% safe...thanks bro
Click to expand...
Click to collapse
Thank you for testing it !

testing on HD2 Eu
---------- Post added at 03:15 PM ---------- Previous post was at 03:00 PM ----------
it works! not so fast, but it works great job!!! :good::good::good:

Waw nice guide.. thank you very much

utanamun said:
Waw nice guide.. thank you very much
Click to expand...
Click to collapse
you are wellcome ! and there is a thank button for that also

Also possible to run Windows 8? Windows 8 is touchscreen aware.
I ask this because I have an image of it.

jwoegerbauer said:
Also possible to run Windows 8? Windows 8 is touchscreen aware.
I ask this because I have an image of it.
Click to expand...
Click to collapse
May work but it will be very slow depend on you device.

Thanks for sharing. I will give it a shot.

Not working here!
Just exits or stands in starting win 98.
Mine is low end device...
Sent from my A1 using xda premium

[MOD]Pure Graphics HD

I Was tweaking my phone a lot and encountered 2 bootloops(in star and tab 3) because of it(Reason- Supercharger script,pathing jar services part)
However i found an amazingly working mod that has really smoothed my experience (Dload links attached below).
They are-
◢ Pure™Graphics HD + Rendering Version ◣ [Tested on Tab 3 7 inch]
http://forum.xda-developers.com/showthread.php?t=2295010
Quote:
Features
- Enable GPU rendernig
- Enable dithering but did not affect consumption!!
- Use the GPU for the management of the touch
- Improve video HW render
- It allows you to play ported ARMV7 games without lags problems
- Increase scores on the AnTuTu graphic rank
- In MDPI devices improves the density pixels and brightness
- Eliminates lag system with the generator of video entropy
- Liquify the UI
Requirements:
1. Some apps still show that there isnt any init.d support so i used uni - init app by
@Ryuinferno
http://forum.xda-developers.com/showthread.php?t=1933849
2. Busybox(from google play)
Note:
Dont use Task killers after using these.
Do Make a CWM Nandroid backup just in case anything goes wrong (There was no problem for me).
Steps:
-Download all attachments.
-Put them in extsd
-Go to CWM Recovery using Hardware keys.
-Flash the zip file.
-Reboot(may take time optimizing the apps)
-Feel the smoothness
Downloads:
http://www.mediafire.com/download/zi7q6fk7cm9lclq/Pure_Graphic_HD_(Rendering+Version).zip

So no one tried flashing?
Sent from my GT-S5282 using Tapatalk

T3snake said:
So no one tried flashing?
Sent from my GT-S5282 using Tapatalk
Click to expand...
Click to collapse
I didn't cause I'm on cyanogenmod
Sent from my SM-T217S using XDA Free mobile app

I flashed it on my tab 3 7.0 lite, I dont notice a difference yet but it didnt break my tablet so theres that lol
Sent from my SM-T110 using XDA Free mobile app

creep138 said:
I didn't cause I'm on cyanogenmod
Sent from my SM-T217S using XDA Free mobile app
Click to expand...
Click to collapse
It is universal so it shud work on any rom any device
thanitos said:
I flashed it on my tab 3 7.0 lite, I dont notice a difference yet but it didnt break my tablet so theres that lol
Sent from my SM-T110 using XDA Free mobile app
Click to expand...
Click to collapse
Oh these are display tweaks so it wont bring out extraordinary smoothness but
it increases benchmark scores by 200 or 400
If ur device was not laggy in the first place then u wont actually see the effect
Also make sure u have init.d support (u can do this using uni init app - link in op)
link for init.d posting here too - http://forum.xda-developers.com/showthread.php?t=1933849
Also this tweak unlike supercharger and many others doesnt contain any ram managing or oop value modification tweaks
just some display tweaks so it cant break ur device

I have tried... and not bad, looks better!

help?
what do i need before installing zip...
anything special i need installed?
btw if busybox is needed then i how to install it?
the play store version dont install it, it says some error occurred and simply dont install it...
i have root access, but still...

sscsps said:
what do i need before installing zip...
anything special i need installed?
btw if busybox is needed then i how to install it?
the play store version dont install it, it says some error occurred and simply dont install it...
i have root access, but still...
Click to expand...
Click to collapse
u need this : https://play.google.com/store/apps/details?id=stericson.busybox
Also 1st time i installed i didnt have busybox installed
But seeing its code iit uses some busybox features so maybe it needs it

can i use this in 10.1?

kayamokid said:
can i use this in 10.1?
Click to expand...
Click to collapse
on any rooted gingerbrd ics jb device
Sent from my GT-S5282 using Tapatalk

kayamokid said:
can i use this in 10.1?
Click to expand...
Click to collapse
It doesn't need, CM 10.1 is stable and tweaked, except we using stock rom...
Sent from my GT-I9300 using XDA Premium 4 mobile app

bangdes said:
It doesn't need, CM 10.1 is stable and tweaked, except we using stock rom...
Sent from my GT-I9300 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
this mod is quite different to what cm has
this is very unique
in terms of effectiveness u wudnt need this since cm is fast
Sent from my GT-S5282 using Tapatalk

T3snake said:
this mod is quite different to what cm has
this is very unique
in terms of effectiveness u wudnt need this since cm is fast
Sent from my GT-S5282 using Tapatalk
Click to expand...
Click to collapse
CM 10.1 has an option '16bit transparency', it's effective too for reducing lag. I think we should compare or maybe use it both together
Sent from my GT-I9300 using XDA Premium 4 mobile app

stock rom ?
it is work with stock rom ?? t210 ?

lildhiel08 said:
it is work with stock rom ?? t210 ?
Click to expand...
Click to collapse
I'm suggest you to use this one for better performance :
http://forum.xda-developers.com/showthread.php?t=2704300
Sent from my SM-T211 using XDA Free mobile app

Can I flash it on 4.4.2 stock? On SM-T211?
Hit thanks if I helped you sent from my SM-T211 using XDA Free mobile app

sscsps said:
Can I flash it on 4.4.2 stock? On SM-T211?
Hit thanks if I helped you sent from my SM-T211 using XDA Free mobile app
Click to expand...
Click to collapse
Yes u can
Sent from my SM-T211 using Tapatalk