Related
Hi all,
So I've decided to root my Exynos International Galaxy Note 3 (SM-N900) using Chainfire's CF-Auto-Root. Problem is, Odin gets stuck at cache.img, then fails after a couple of minutes. Phone then displays BSOD whenever I try to boot. I can access download mode again, but not recovery. My phone is stock 4.2.2.
It's the first time I have such a problem, I flashed a couple of phones before without any trouble. I searched XDA for a solution and tried other Odin versions, different cable/ports, even tried on another computer, still doesn't work.
My first concern is not to lose any data as I didn't back anything up. Any help would be greatly appreciated. Feel free to ask about any missing info.
Thanks!
I see. It didn't say on the XDA thread it was only for Lollipop, but I checked in CF's website and you're right. I've wanted to update to LL ages ago but I didn't get it through OTA. The only LL release that's available for SM-N900 in SamMobile is Russian :/ I don't know if I should flash that one...
Would it be safe to flash back my stock 4.2.2 to at least get my phone back working? Or would the Russian release work for me (assuming it has language choice)?
Also, once I choose which ROM to use, would I loose my data when I flash it? I assume it is flashed the same way than root.
Thanks!
Hi, thank you for using XDA Assist. I assume you've seen this,http://forum.xda-developers.com/showthread.php?t=2466423. In regards to flashing a Rom you should always clear data, dalvic cache and cache before flashing. That will erase data so backup first. You should look into titanium backup on the play store.
jd1639 said:
Hi, thank you for using XDA Assist. I assume you've seen this,http://forum.xda-developers.com/showthread.php?t=2466423. In regards to flashing a Rom you should always clear data, dalvic cache and cache before flashing. That will erase data so backup first. You should look into titanium backup on the play store.
Click to expand...
Click to collapse
Yes, that is the thread I've used to flash the root. Now I have a BSOD phone and need to fix it without losing data :/ I didn't back up so I guess flashing ROM is out of the question. Any suggestions ?
GST_Diandre said:
Yes, that is the thread I've used to flash the root. Now I have a BSOD phone and need to fix it without losing data :/ I didn't back up so I guess flashing ROM is out of the question. Any suggestions ?
Click to expand...
Click to collapse
You're not going to like it, but you need to flash the stock firmware in Odin and lose your data. It's the only way to get your device working again.
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
You're not going to like it, but you need to flash the stock firmware in Odin and lose your data. It's the only way to get your device working again.
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
I'm surprised. Can you at least explain why the root didn't work? I did everything as stated in the tutorial. I didn't expect a simple root operation would result in me losing everything on my phone; some data I cannot afford to lose.
Also, the phone says that using Kies in recovery mode is what should be done. Kies doesn't recognize the phone as needing repair. Any info?
Thanks !
GST_Diandre said:
I'm surprised. Can you at least explain why the root didn't work? I did everything as stated in the tutorial. I didn't expect a simple root operation would result in me losing everything on my phone; some data I cannot afford to lose.
Also, the phone says that using Kies in recovery mode is what should be done. Kies doesn't recognize the phone as needing repair. Any info?
Thanks !
Click to expand...
Click to collapse
Sorry, but live and learn. Always backup before doing any thing new on your phone. Especially rooting and flashing roms as they sometimes go wrong and rooting bypasses some of the safe guards the manufacture builds into the phone to avoid problems. Kies is crap. Learn to use Odin, if your rooting and roming you'll need it sooner or later. And you're at the sooner stage.
Edit, I'd really try asking your question here, http://forum.xda-developers.com/galaxy-note-3/help. I'm not sure on your device if you can go back to nb1, 4.4.4, firmware. I'm assuming there is no 5.x firmware for your device at this time. You can check at sammobile.com. But Samsung has updated the bootloader with each update and you have to flash the firmware with the same bootloader version. You can't go backwards.
Sent from my Nexus 9 using XDA Free mobile app
jd1639 said:
Sorry, but live and learn. Always backup before doing any thing new on your phone. Especially rooting and flashing roms as they sometimes go wrong and rooting bypasses some of the safe guards the manufacture builds into the phone to avoid problems. Kies is crap. Learn to use Odin, if your rooting and roming you'll need it sooner or later. And you're at the sooner stage.
Edit, I'd really try asking your question here, http://forum.xda-developers.com/galaxy-note-3/help. I'm not sure on your device if you can go back to nb1, 4.4.4, firmware. I'm assuming there is no 5.x firmware for your device at this time. You can check at sammobile.com. But Samsung has updated the bootloader with each update and you have to flash the firmware with the same bootloader version. You can't go backwards.
Sent from my Nexus 9 using XDA Free mobile app
Click to expand...
Click to collapse
I will, thank you. I can't afford losing anything as of now. Really hope there's a way of getting it to boot back up.
GST_Diandre said:
I will, thank you. I can't afford losing anything as of now. Really hope there's a way of getting it to boot back up.
Click to expand...
Click to collapse
SOLVED. I can't believe how easy it was. I was about to flash it over from scratch but then it struck me.
Chainfire ships Odin with all its root bundles, a version where you cannot untick "Auto Reboot". Because of Auto Reboot being ticked, Odin freezes at "cache.img". It might not freeze for some people but for me, having Auto Reboot activated causes the freeze
Downloading a different version of Odin (any version, I used 3.09) that allows changing parameters and LEAVING EVERYTHING UNTICKED BUT F. RESET TIME works like a charm.
Don't forget to reboot your phone after Odin displays PASS or RESET (Long press power).
I'm going to PM Chainfire about this, and tell a max of people about it.
Thank you for your support
EDIT: Also going to NANDroid my phone. I'm tired of panicking over failed roots
Can anyone help? I spent a big chunk of my hard earned money on a refurbed S6 for my daughter, she's had it about a week (she's Pokemon mad btw). The latest update for Pokemon Go came out and now she's blocked from the game as it appears the phone has been rooted. If I'd known, I wouldn't have bought it. Anyway, for the last 2 days my partner and I have been trying to unroot it. We've used various versions of Odin to no avail. I had a lot of trouble finding the right firmware because it looks like the phone was Polish according to the version and CSC numbers, and tbh I'm still not sure if we're trying the right one. Software is 5.1.1. right now. I've tried installing SuperSU but it won't run, it just crashes the phone and forces a reboot. We've tried manually unrooting with a file manager but the su files we need to delete reappear seconds after they're deleted. I'm at the end of my tether, does anyone have any ideas?
You won't be able to unroot it until you flash stock firmware. I don't know if the game checks the knox status.
Give this a go
http://www.androidpolice.com/2016/09/11/guide-play-pokemon-go-0-37-rooted-android-magisk/
Enjoy
Unforunately my partner spent almost all night trying to flash the firmware. According to him it 'nearly' worked, however, I now have a phone stuck in a boot loop. :crying:
Run emergency recovery on Smart switch
ccalixtro said:
Run emergency recovery on Smart switch
Click to expand...
Click to collapse
Do I need to have smart switch installed on the phone for this to work?
amber_1978 said:
Do I need to have smart switch installed on the phone for this to work?
Click to expand...
Click to collapse
No, run it on your pc.
Thanks, I'll give it a go after work.
ccalixtro said:
No, run it on your pc.
Click to expand...
Click to collapse
Smart switch won't work, says it doesn't recognise the device
I think I would give original firmware of your country and odin a try. One of possible ways is to download all needed files from the site of sammobile.
For me this way works every time when I stuck in boot loop. Odin functionates when you are in download mode. Switch off your s6, then start by pressing home-, powerbutton and Volume down at the same time.
Then start Odin on PC, then connect USB and so on.
Greetz JG
amber_1978 said:
Smart switch won't work, says it doesn't recognise the device
Click to expand...
Click to collapse
When you select emergency recovery theres an option where you have to write the device model and the serial number
Use kies 3 on your computer. When you get it do a "firmware upgrade and installation" it will ask for your serial number which you can get from download mode when pressing the home key. After that kies 3 will ask to boot your phone to recovery but instead boot to download and bow your phone will flash to stock. This method always work!!
fahad999 said:
Use kies 3 on your computer. When you get it do a "firmware upgrade and installation" it will ask for your serial number which you can get from download mode when pressing the home key. After that kies 3 will ask to boot your phone to recovery but instead boot to download and bow your phone will flash to stock. This method always work!!
Click to expand...
Click to collapse
Thanks for the reply. Unfortunately I've tried Kies already and I can't get it to work at all. I get a message telling me my device is not compatible and the whole thing just stops. I'll give it another go though, no harm in trying. Thanks
@amber_1978, Pokemon Go does not check for root. The only thing it does seem to check for is location spoofing via another app. I'm using it on a rooted, Knox tripped, Xposed installed phone with no issues.
If you want to return the phone back to stock, the best way IMO would be to use Odin to flash a stock image, such as the EPD1 firmware.
socal87 said:
@amber_1978, Pokemon Go does not check for root. The only thing it does seem to check for is location spoofing via another app. I'm using it on a rooted, Knox tripped, Xposed installed phone with no issues.
If you want to return the phone back to stock, the best way IMO would be to use Odin to flash a stock image, such as the EPD1 firmware.
Click to expand...
Click to collapse
Really? Did you do the latest update in the game and it still worked ok? This phone has definitley not been used for location spoofing by us and I'm pretty sure there were no apps of that nature on the phone. I downloaded a root checker when everything went wrong the other day, it said the phone was rooted. I'm totally at a loss tbh. Right now it's still in a boot loop. Trying to flash it with Odin as we speak.
Just an update. Tried Smart Switch. Tried the model and serial numbers on the back of the phone case, these weren't recognised so I went to the recovery screen and hit the home button and got a completely different set of numbers. Different IMEI, model number, you name it. I'm assuming this is why Odin won't work, I'm looking for the wrong firmware? I obviously have Frankenstein's phone. No idea what to do now.
Best thing to do is to flash TWRPP and try to flash a custom stock rom through the TWRP recovery which does not have root installed..... If that doesn't work try to find a generic stock firmware for Odin, meaning a firmware that can run in any country..... If all else fails update it to 6.0.1 stock firmware. Try the closest firmwares to your location.
And if you do manage to get to the Samsung logo let the phone sit there for a good 10 minutes even if it reboots....
When I bricked my Samsung I used masiks custom 6.0.1 rom based on stock, but had all the links to bootloaders cscs radios and what not so giv that a shot if you can find it.
---------- Post added at 12:08 AM ---------- Previous post was at 12:05 AM ----------
Link to rom that helped me http://forum.xda-developers.com/galaxy-s6/development/masik-marshmallow-1-0-jan-20-2016-t3297961
do you have lucky patcher playstore installed ?
Hi. I'm finally can root my SM-G920R6. I use the KingRoot.apk the v4.80 and root the phone. But it's not full root. Them I use the SuperSuMe.exe on my PC to remove all the KingRoot app and install the official SuperSu.apk The program install it's self. And now we can install the correct binary and reboot the device and don't lose root... ohh and my Knox still 0x0... =) XD:laugh: :victory: :highfive:
Links:
●KingRoot v4.80
●SuperSuMe. for PC
Sincerely I don't know if full root or not. But for me is working. And other things I don't know is full knox disabled. The SuperSuMe block the knox in one of the process but I don't know if is disabled at all or not.
I wish this can't help all the SM-G920R6 user. And don't want to avoid the knox warranty.
The only thing you can see is every time you BootUp your phone it say Custom.
The next thing I'm going to do is make a full backup with FlashFire app because mi firmware not appear in SamMoblie. If one Dev can make something with this backup for make custom roms or something good for this devices model.
my phone info:
Android Version : 5.0.2
Baseband : G920R6WWU1AOE4
Build Number : LRX22G.G920R6WWU1AOE4
Hardware Version : G920R6.02
I'm not a good English speaker so I apologize my errors..
P.S.
Sorry I'm not a Dev. this is my first Thread and I do this for helping.
This is a little off topic for the op but I really need help right now.. I rooted with CF autoroot for G920F no problem then installed TWRP 3.0.2-1 zeroflteusc also built for G920F model and in the process of trying to find a better rom as soon as I had a custom recovery, me (being a dumba**) accidentally wiped my internal storage to do a clean flash of a rom therefore deleting the only backup I had. I've only been able to find the factory binary for this device which I flashed but it had literally nothing exept for basic testing software and a simple ui to run it. It was also stuck on Android 5.0.2 but I found a compatible rom with AllianceROM v1 with update v2 flashed for the G920F but I can't find any way to update past 5.0.2!! I've been trying to find a way to update somehow for weeks but nothing is compatible with my device and I'm stuck. Would someone that has my model running on Android 5.1.1 or 6.0/.1 please install the TWRP I mentioned before and make a backup of the system, modem, efs, and boot and post it online or send it to me it would be a lot of help.
Reasons I hate you I guess ?
You are a real piece of **** and a cancer to those with A ACTUAL SAMSUNG-SMG920V.
I don't even know why you posted this here you don't even have a SM G920R6.
Seriously you just made me give up hope once again on getting root on my SAMSUNG-SMG920 on android 6.0.1 :crying:
Sincerely yours ( Another piece of **** with this **** tastic phone that dies in 3 hours and you can do jack **** with)
P.s. It also dies in 3 hours no matter what I install on it no matter on many resource manager apps I use, it just ****ing dies.
P.s.s. Sorry for swearing so much...
hoppits said:
You are a real piece of **** and a cancer to those with A ACTUAL SAMSUNG-SMG920V.
I don't even know why you posted this here you don't even have a SM G920R6.
Seriously you just made me give up hope once again on getting root on my SAMSUNG-SMG920 on android 6.0.1 :crying:
Sincerely yours ( Another piece of **** with this **** tastic phone that dies in 3 hours and you can do jack **** with)
P.s. It also dies in 3 hours no matter what I install on it no matter on many resource manager apps I use, it just ****ing dies.
P.s.s. Sorry for swearing so much...
Click to expand...
Click to collapse
Because my device is G920R6 originally and i want it back the 920F rom is barely compatible with my device as is and i want a stable rom made for my build and also to enlighten others of how i rooted this phone and what custom recovery is working for me. Even on 5.0.2 and an unstable rom my battery lasts 6+ hours of constant use so root is working fine for me.
So much hate.
yeah i see now this model phone is the ugly duck....
But some one have the factory firmware of this model flashable with odin. Thanks a lot.
Casper1619 said:
This is a little off topic for the op but I really need help right now.. I rooted with CF autoroot for G920F no problem then installed TWRP 3.0.2-1 zeroflteusc also built for G920F model and in the process of trying to find a better rom as soon as I had a custom recovery, me (being a dumba**) accidentally wiped my internal storage to do a clean flash of a rom therefore deleting the only backup I had. I've only been able to find the factory binary for this device which I flashed but it had literally nothing exept for basic testing software and a simple ui to run it. It was also stuck on Android 5.0.2 but I found a compatible rom with AllianceROM v1 with update v2 flashed for the G920F but I can't find any way to update past 5.0.2!! I've been trying to find a way to update somehow for weeks but nothing is compatible with my device and I'm stuck. Would someone that has my model running on Android 5.1.1 or 6.0/.1 please install the TWRP I mentioned before and make a backup of the system, modem, efs, and boot and post it online or send it to me it would be a lot of help.
Click to expand...
Click to collapse
Hi. i found a factory SM-G920R6 Android 6.0.1 frimware... but this android version I'm rooted with the same cf auto root you used .
And I don't know remember were i downloaded the firmware.. But later I try to uploaded.
M3RS3 said:
Hi. i found a factory SM-G920R6 Android 6.0.1 frimware... but this android version I'm rooted with the same cf auto root you used .
And I don't know remember were i downloaded the firmware.. But later I try to uploaded.
Click to expand...
Click to collapse
Could you install the twrp recovery I mentioned and make a backup of the system and boot and post that?
Casper1619 said:
Could you install the twrp recovery I mentioned and make a backup of the system and boot and post that?
Click to expand...
Click to collapse
yeap.. but when I install the recovery the phone gave a glitch.. its flipping the touch response inverted.. and the only fix is with root. and use the app. phone info.apk for Samsung and use the secret code with root because it is blocked on the dialer.
but i have the backup for the new firmware. not the android 5.0.2
M3RS3 said:
yeap.. but when I install the recovery the phone gave a glitch.. its flipping the touch response inverted.. and the only fix is with root. and use the app. phone info.apk for Samsung and use the secret code with root because it is blocked on the dialer.
but i have the backup for the new firmware. not the android 5.0.2
Click to expand...
Click to collapse
That's exectly what I need I'm stuck on 5.0.2 and I want to upgrade back to 6.0.1 it's mainly the bootloader I need because no other marshmallow bootloaders work for this phone and the one I have is only for 5.0.2
Casper1619 said:
That's exectly what I need I'm stuck on 5.0.2 and I want to upgrade back to 6.0.1 it's mainly the bootloader I need because no other marshmallow bootloaders work for this phone and the one I have is only for 5.0.2
Click to expand...
Click to collapse
But i have the stock firmware flashable with odin. you have my same phone. SM-G920R6?
M3RS3 said:
But i have the stock firmware flashable with odin. you have my same phone. SM-G920R6?
Click to expand...
Click to collapse
Yeah if you could send it to me that would be awesome
Casper1619 said:
Yeah if you could send it to me that would be awesome
Click to expand...
Click to collapse
you can download send anywhere app in playstore and i cand send directly to you.
.....
ohhh let me check if i haved in the phone because i give my pc to one cousin to make some homework. and i dont haved right now.
M3RS3 said:
you can download send anywhere app in playstore and i cand send directly to you.
Click to expand...
Click to collapse
Alright I've got work then I'll be back
Casper1619 said:
Alright I've got it ready whenever you are
Click to expand...
Click to collapse
Give me some minute to go to my cousin house.. is near of my house to get the file and copy on my pendrive..
Casper1619
Sorry i go to uplode the two file. the BACKUP and the Stock Firmware 6.0.1 in MEGA and then i post the two links.. I promes... because the internet it come extremely slow... when i uploded the two file i posted ok...
M3RS3 said:
Sorry i go to uplode the two file. the BACKUP and the Stock Firmware 6.0.1 in MEGA and then i post the two links.. I promes... because the internet it come extremely slow... when i uploded the two file i posted ok...
Click to expand...
Click to collapse
Okay how long do you think it'll be?
Casper1619 said:
Okay how long do you think it'll be?
Click to expand...
Click to collapse
i don't know maybe for tomorrow.. have a good night.:good:
M3RS3 said:
i don't know maybe for tomorrow.. have a good night.:good:
Click to expand...
Click to collapse
Okay thanks you too
Does anyone know where I can get just the stock bootloader image to flash via TWRP?
Long story short I F'd up my bootloader and now Odin will not flash a stock BL file do to a version mismatch and to make matters worse I can't find a way to restore to stock baseband so my network isn't working. If someone can share a backup that'd be super
EDIT: Forgot to specify I need it from a TMobile variant (J700T) for firmware APK6 or APK3 (Odin doesn't seem to want to flash the stock BL from my Odin ROMs perhaps because there is a version mismatch in the phone?)
NullaVisus said:
Does anyone know where I can get just the stock bootloader image to flash via TWRP?
Long story short I F'd up my bootloader and now Odin will not flash a stock BL file do to a version mismatch and to make matters worse I can't find a way to restore to stock baseband so my network isn't working. If someone can share a backup that'd be super
EDIT: Forgot to specify I need it from a TMobile variant (J700T) for firmware APK6 or APK3 (Odin doesn't seem to want to flash the stock BL from my Odin ROMs perhaps because there is a version mismatch in the phone?)
Click to expand...
Click to collapse
download latest stock rom at sammy..
Already tried. Looks like I am officially a victim of a partial brick (Odin wont flash BL because it thinks I'm downgrading and I have no Baseband/network) I'll try and see what I can do through TWRP since I can still flash that through Download mode. I made no backups myself but would restoring another TWRP backup solve it perhaps?
NullaVisus said:
Already tried. Looks like I am officially a victim of a partial brick (Odin wont flash BL because it thinks I'm downgrading and I have no Baseband/network) I'll try and see what I can do through TWRP since I can still flash that through Download mode. I made no backups myself but would restoring another TWRP backup solve it perhaps?
Click to expand...
Click to collapse
try flash custom rom after that flash stock rom..
khaisttj92 said:
try flash custom rom after that flash stock rom..
Click to expand...
Click to collapse
No dice my dude. However, I did find something else
Turns out when I check the bootloader version it reads J700T1UVU3AQC3. Sure enough there was a baseband update and security update a few days ago and my device must've installed it while I was asleep. This would explain why my baseband is broken AND why Odin doesn't want me to flash the APK6 Bootloader.
So there's good news and bad news. The good news is there is hope but the bad news is I am currently at the mercy of whenever someone decides to upload this firmware on the internet (if anyone does that is)
NullaVisus said:
No dice my dude. However, I did find something else
Turns out when I check the bootloader version it reads J700T1UVU3AQC3. Sure enough there was a baseband update and security update a few days ago and my device must've installed it while I was asleep. This would explain why my baseband is broken AND why Odin doesn't want me to flash the APK6 Bootloader.
So there's good news and bad news. The good news is there is hope but the bad news is I am currently at the mercy of whenever someone decides to upload this firmware on the internet (if anyone does that is)
Click to expand...
Click to collapse
sorry dude i cant help u because im using f variant..
khaisttj92 said:
sorry dude i cant help u because im using f variant..
Click to expand...
Click to collapse
Thanks anyways my dude
NullaVisus said:
Thanks anyways my dude
Click to expand...
Click to collapse
your welcome..
NullaVisus said:
No dice my dude. However, I did find something else
Turns out when I check the bootloader version it reads J700T1UVU3AQC3. Sure enough there was a baseband update and security update a few days ago and my device must've installed it while I was asleep. This would explain why my baseband is broken AND why Odin doesn't want me to flash the APK6 Bootloader.
So there's good news and bad news. The good news is there is hope but the bad news is I am currently at the mercy of whenever someone decides to upload this firmware on the internet (if anyone does that is)
Click to expand...
Click to collapse
You are lucky because you at least have a functioning bootloader and a working TWRP. You are unlucky because AQC3 firmware is not available publicly yet. In any case, bootloader cannot be flashed in TWRP as far as I know. Your only option is to get your missing ACQ3 partitions from someone else's back up. IF you have messed up your EFS partition though you are out of luck.
So exactly what partitions do you need? I may be able to give you those partitions if I have a personal backup of those from the past. Right now I have modified so many things that a current copy of my partitions will probably do you more harm than good.
najoor said:
You are lucky because you at least have a functioning bootloader and a working TWRP. You are unlucky because AQC3 firmware is not available publicly yet. In any case, bootloader cannot be flashed in TWRP as far as I know. Your only option is to get your missing ACQ3 partitions from someone else's back up. IF you have messed up your EFS partition though you are out of luck.
So exactly what partitions do you need? I may be able to give you those partitions if I have a personal backup of those from the past. Right now I have modified so many things that a current copy of my partitions will probably do you more harm than good.
Click to expand...
Click to collapse
As far as I know I just need a main system.img backup
Edit; to specify, if I was flashing with Odin it would be what I would put in the AP slot
The phone in its current state is extremely slow and buggy. My intuition tells me that the older Android version does NOT like the new fiirmware (The bootloader is also where the firmware/device config info is stored IIRC)
NullaVisus said:
As far as I know I just need a main system.img backup
Edit; to specify, if I was flashing with Odin it would be what I would put in the AP slot
The phone in its current state is extremely slow and buggy. My intuition tells me that the older Android version does NOT like the new fiirmware (The bootloader is also where the firmware/device config info is stored IIRC)
Click to expand...
Click to collapse
I can give you a system image but you will have to flash it in TWRP.
najoor said:
I can give you a system image but you will have to flash it in TWRP.
Click to expand...
Click to collapse
Thats fine. I already know how
NullaVisus said:
Thats fine. I already know how
Click to expand...
Click to collapse
Well lucky me Ive got a similar situation though I reflashed with a 3-part HOME file from sammobile to unroot/unTWRP, but did so not realizing the darn BL wasnt included. Lucky for me my build versions matched, so Odin flashed flawlessly, the device boots as if it were brand new, stock recovery and all, everything functions/boots as it should, splash, factory setup, TMobile network works fine etc - only problem is both SafetyNet tests fail, so Google wont let me use use Android Pay and every other payment app that hooks into their API shuts me out. I also noticed a lightning-fast error right before going into the bootloader if you boot from the stock recovery (its so fast I need to capture the log to see what it is).
Any suggestions on where to find a BL to go with my J700T & assuming I find one, any nuances I should be aware of when flashing so as to avoid a potential brick situation?
FYI I flashed with the below from sammobile (and yes I was already at AQF1).
J700TUVS3AQF1_J700TTMB3AQF1_J700TUVS3AQF1_HOME.tar
rawkahn said:
Well lucky me Ive got a similar situation though I reflashed with a 3-part HOME file from sammobile to unroot/unTWRP, but did so not realizing the darn BL wasnt included. Lucky for me my build versions matched, so Odin flashed flawlessly, the device boots as if it were brand new, stock recovery and all, everything functions/boots as it should, splash, factory setup, TMobile network works fine etc - only problem is both SafetyNet tests fail, so Google wont let me use use Android Pay and every other payment app that hooks into their API shuts me out. I also noticed a lightning-fast error right before going into the bootloader if you boot from the stock recovery (its so fast I need to capture the log to see what it is).
Any suggestions on where to find a BL to go with my J700T & assuming I find one, any nuances I should be aware of when flashing so as to avoid a potential brick situation?
FYI I flashed with the below from sammobile (and yes I was already at AQF1).
J700TUVS3AQF1_J700TTMB3AQF1_J700TUVS3AQF1_HOME.tar
Click to expand...
Click to collapse
The bootloader is always included with the firmware and is most certainly included with the firmware you posted.
Safetynet probably fails because you need to factory reset.
I have a Galaxy 7 G930P and i try to reset this phone for unlock a Google Account with Odin and other Boot Loader, but I bricked this phone and now only the phone restarts alone and does not turn up the system. I can put this phone in download mode and i need Help for Install all with the correct stock fimwares. Thanks and i hope fixed this...
billaboy said:
I have a Galaxy 7 G930P and i try to reset this phone for unlock a Google Account with Odin and other Boot Loader, but I bricked this phone and now only the phone restarts alone and does not turn up the system. I can put this phone in download mode and i need Help for Install all with the correct stock fimwares. Thanks and i hope fixed this...
Click to expand...
Click to collapse
Cannot help much if there is no details on what your phone bootloader/firmware versions were before flash, and what versions you were trying to flash.
If you were flashing a lower version of BL to your phone, you can flash your original firmware back to your phone.
If you were flashing a higher version of BL, you will need to find a new version of BL/firmware , such as the latest U firmware, to Odin into the phone..
billaboy said:
I have a Galaxy 7 G930P and i try to reset this phone for unlock a Google Account with Odin and other Boot Loader, but I bricked this phone and now only the phone restarts alone and does not turn up the system. I can put this phone in download mode and i need Help for Install all with the correct stock fimwares. Thanks and i hope fixed this...
Click to expand...
Click to collapse
yves31 said:
Cannot help much if there is no details on what your phone bootloader/firmware versions were before flash, and what versions you were trying to flash.
If you were flashing a lower version of BL to your phone, you can flash your original firmware back to your phone.
If you were flashing a higher version of BL, you will need to find a new version of BL/firmware , such as the latest U firmware, to Odin into the phone..
Click to expand...
Click to collapse
Read this thread
https://forum.xda-developers.com/sprint-galaxy-s7/help/bloat-free-firmware-930u-tried-t3428974
Since you mentioned a Google account, just make sure you know the user and password of the last working Google account on the phone. Sounds like you tried to flash a firmware with an older bootloader.
And if you don't know that info and were trying to carrier unlock it via some back door method, don't follow the thread that I just linked.
semi-bricked
this happened to me as well. dont have access to this device since november. flashing the phone with official samsung firmware doesnt seem to work either,cant boot into recovery
TormentedHeart said:
this happened to me as well. dont have access to this device since november. flashing the phone with official samsung firmware doesnt seem to work either,cant boot into recovery
Click to expand...
Click to collapse
Can you get into download mode? Power + home + volume down?
lvpre said:
Can you get into download mode? Power + home + volume down?
Click to expand...
Click to collapse
yes i can. flashing stock firmware doesnt seem to fix the probelm either
TormentedHeart said:
yes i can. flashing stock firmware doesnt seem to fix the probelm either
Click to expand...
Click to collapse
Do you receive an error message when flashing? Also, have you tried another USB cable and make sure you use an usb 2.0 port too.
lvpre said:
Do you receive an error message when flashing? Also, have you tried another USB cable and make sure you use an usb 2.0 port too.
Click to expand...
Click to collapse
no error message it flashes successfully with odin but when the phone itself starts to update the firmware after 33% it just reboots then fails. then i get a error screen and well no recovery. no one locally seemed to be able to fix the issue either so update: i sent it away to try to fix. https://imgur.com/a/knxKIKM