[success] lenovo s650 root - Android General

TOOLS NEEDED:
SP Flash Tool
MTK Droid Tools
ADB Drivers
Some of the tools needed are posted here: http://forum.xda-developers.com/showthread.php?t=2160490
Follow instructions posted here, CAREFULLY!:
http://forum.xda-developers.com/showpost.php?p=38337401&postcount=5
NOTE:
FOR STEP #8:
CHECK "DA DL All With Check Sum"
Might help you in the future:
How to Install MT65XX Preloader Driver
http://forum.xda-developers.com/showthread.php?t=2180436
Problems you might encounter:
FOR STEP #8:
'RECOVERY' location in SP Flash Tool not specified/detected/found.
Solution:
Just rename the file to 'recovery.img', then reload again the scatter file created. And you'll see the location now is specified.
ex. 'Lenovo-S650_131226__recovery_140329-163615.img' to 'recovery.img'
CREDITS TO rua1 and others..

Thanks your work.

Is It 100% working?
will it cause any problems?
anything i have to look out for?

Related

sp flash tool error 8038 - android 4.3 device Timmy E82

Wondering if someone could help. I have a Timmy E82 Android 4.3 MTK MT6582 device and been unable to fully root it with any tools, due to /system refusing to mount. My device is true 4.3 it seems.
I'm using:
SP_Flash_Tool_v3.1332.0.187
MTK Droid tools v2.5.1
I made completed all the steps to get a scatter, it created a patched recovery, which I renamed to recovery.img and put both the scatter and the recovery in the same folder.
But then I'm getting error 8038.
Reading here: http://www.phcorner.net/threads/fix-...sh-tool.64302/
And a few other places it suggests the issue is a mis match in the scatter file. What is it I need to modify in the scatter to get it working so I can flash a custom recovery? I honestly don't know what value the SP log is e
Also I read the pre-loader needs to be able to in the same folder, as the scatter and recovery, does also also need to be ticked during the custom recovery flashing process?
Please see my attached scatter file and log with SP tools.

[TOOL][SHARE]Honor Multitool

ORIGIONAL THREAD IS LOCATED HERE AND PLEASE THANK THE DEV'S FOR Their AWSOME WORK.
You can get a short explanation about the tool here but visit the origional link to follow up
What Multi-Tool does:
-SelfAutoUpdate Function
-Unlock/Relock Bootloader.
-Flash TWRP/Stock Recovery.
-Rooting
-Unbrick from bootloop.
-Install ADB drivers
-Install HiSuite for all drivers. (Reccomend delete manualy after installing drivers)
-Debranding (change model/vendor id)
-Flashing users IMG files
Thanks to inside!out and VirusPlus for their awsome work. Cheers:good:
This tool is being updated for all devices .kindly utilize it

MTK Firmware Backup & Extraction ( All Partitions )

Acquire a similar scatter file for another device.
Use ADB to extract Partition information.
Edit similar Scatter using ADB and Device for Reference's.
Add the Partition information into the similar scatter.
Test scatter file for proper PMT & HW Chip ID.
Error & Repairs for HW ID Mismatch & PMT Changed.
Test Error repaired scatter to extract Preloader.
Extract preloader from BOOT_0.
Test Preloader with boot.img extraction & download.
Save Scatter file & Preloader into a safe place.
Use Scatter & Preloader for Memory Test.
Use Memory Test information for Read back of entire Memory.
Save Full Read back to a safe place.
Extract System.img, Boot.img, Recovery.img, NVram.img, NVDATA.img, frp.img, Etc.
Compile Firmware for SP Flash Tool.
Edit & Remove proprietary information from firmware for custom release.
Leave stock for stock Firmware extraction.
For Pure time consumption reasons, this guide may take me a while to complete, however the steps above should give you a rough idea of how everything is going to be written...
To start with, the information is so much at once, that I've made a video to help people go along with it...
The video is in 2 parts & in English... Please watch these first, that'll cover about everything in the steps except a few things like compilation of extracted IMG files.
The second video should be watched after the first video, so I've put that link in the description of video 1.
https://youtu.be/e2_U68EGSlY
OK... Now you've seen the instructions, you can work through extracting every partition you'll need for a firmware backup.... You don't need all of them !
After that, Copy the following files (you should now have them all ) to a new folder called Stock Firmware for SP Flash Tool ..
boot.img
cache.img
lk.img
logo.img
preloader.bin
recovery.img
secro.img
system.img
trustzone.bin or .img
userdata.img
MT*****_Android_scatter.txt
Now you need to edit the Scatter file using NotePad++ or another program that won't wreck line endings... Word pad & Notepad will wreck line endings and destroy the scatter file.
Edit the scatter file to now have the correct file names, eg.....
preloader_******_njh_gjb_.bin TO preloader.bin - The same as your copied file name.
boot_example_mt.img TO boot.img - The name of the file for boot.
Now the scatter file, Image's & Preloader should be all together...
ZIP the folder to remove empty space in .img files, Shrink the Firmware to a Zip file.....
You just need to extract the zip file and open the scatter file in SP Flash Tool v5.16+ .. Then select Download to do a firmware installation.
I will edit this guide in time, however I just wanted to get out how I do this on my MTK Device's... People keep asking me how to do it, so I released the video and this extra information for them... I don't make money on YouTube so everything here is provided free & I don't make any money from helping !!! Sorry about the terrible audio !

I want the scatter file for the hd 8 2020

Can you give it to me so I can flash roms? And I have the empty vbmeta though.
Yanny 57 XDA said:
Can you give it to me so I can flash roms? And I have the empty vbmeta though.
Click to expand...
Click to collapse
You may use MTK Droid Tools to create scatter files. Scatter file format is a plain text format (*.txt)
How to create Scatter File for MTK Devices
Step-by-Step guidelines to create scatter file for MTK Devices using the MtkDroidTools on Windows Computer.
androidmtk.com
AmznUser444 Dev said:
You may use MTK Droid Tools to create scatter files. Scatter file format is a plain text format (*.txt)
How to create Scatter File for MTK Devices
Step-by-Step guidelines to create scatter file for MTK Devices using the MtkDroidTools on Windows Computer.
androidmtk.com
Click to expand...
Click to collapse
i did that before and it did not work

SPFlash tools error

Hello,
just a quick quetion guys. I downloaded Sp Flash tools because I want to try to unbrick my old acer tablet.
When I download Sp Flash tools from spflashtool.com I unpack the zip file and click on assistant.exe I get
error messages saying that QtSql4.dll, QtWebkit4.dll, QtHelp4.dll, QtXml4.dll are missing.
What the hell is wrong? Can someone give me a working link to SpFlash tool?
If the mentioned DLL-files are housed in the ZIP-file then copy these into folder C:\Windows\System32

Categories

Resources