Hello,
I'm looking for an option to connect my s4 to a touchscreen hdmi screen and also with wording touchscreen op the external monitor
Is this possible??
Thanks
Tom
Related
Hi guys,
Is there any way to connect a Hero or Vega (or any android device for that matter) to an external touch screen monitor and control the phone/tablet via the large monitor?
I understand it is pretty easy to watch movies etc on a bigger monitor but I am wanting to actually use the touch screen input of the monitor to control the device.
My aim is to use this as an entertainment system on a 22" (anything over 15") touch screen in a VW campervan conversion project smile.gif
Any help hugely appreciated.
Cheers,
Wag
look on ebay for touch screen addons for laptop or computer monitors most just emulate a usb mouse so if the android tablet or whatever your using supports usb mouse support like some of the viewsonic gtablet roms do i woul think it would work pretty good if you could find one for the size screen you want.
something like this but for the size screen you want http://goo.gl/4GdgT
You need to hack it
I had a similar idea and one of the Touch screen panels as mentioned by gator2k83. It did not work that way as he proposed.
The touch screen works with absolute positions. A mouse is relative position.
You need to hack it the bad way.
See my blog post about it:
beyondthekeeboard.wordpress.com /2011/10/05/bigscreen-android-with-touch/
If anyone has other experiences, let me know.
HP 23TM touch screen monitor and android tablets
Would the new HP 23TM touch screen monitor work with a 7 inch tablet as an external touch screen monitor? The table has a hdmi out and a micro usb out which could be hooked up with OTG cable?
Thanks.
It would be great to be able to do that
refer to below link
http://www.freaktab.com/showthread.php?1802-Touchscreen&highlight=st2220t
Its been 4 years since the original post, so I'm curious if its any easier now. I would like to control my Samsung Galaxy S3 (MHL compatible) via a MHL 3.0 cable and this touchscreen. Any ideas/advice?
Please help me know if there is a way to connect Tab 2 to a VGA LED monitor, wireless keyboard and wireless mouse. Thanks in advance for your help
drsacha said:
Please help me know if there is a way to connect Tab 2 to a VGA LED monitor, wireless keyboard and wireless mouse. Thanks in advance for your help
Click to expand...
Click to collapse
hi,
For Tab 2 there is an adapter with an HDMI output. It could connect to a monitor if has a DVI input (you will need a HDMI to DVI adapter), but I'm not sure you'll get a picture of your desktop.
For mouse and keyboard do not know if any solution.
hi all,
Since the Search button isn't working atm i make a new threat... ('Search is temporarily unavailable. We apologize for the inconvenience.')
So my question is:
Does anyone has connected the TF300T Tab to a external screen ? is the resolution good? when i want to play Dead Trigger , would i have a lot of benefit with a external screen?
I have a 21" monitor with VGA and DVI , i found online a Micro HDMI to VGA cable , so that should work right ?
Aslo would external USB hub's work on the USB-port on the TF300T ?
Thank you
yes you can use hubs but they won't do you really no good if you have a dock
Tf300t cm10
Long time viewer, first time posting.
I'm a science teacher and I use a galaxy note 10.1 (original) to do my lectures and I project the image on the screen with allshare cast. The problem is, our school has old projectors with no HDMI and only XGA resolution. Up until now, I have been using an HDMI --> DVI cable which displays the image clearly. The problem of course is that there is no sound. I don't need sound most of the time, so I've been getting by without it.
However, after reading a few threads on here I found that people had success using allshare with the Cable Matters active HDMI --> VGA with audio cable on amazon. So I picked up one of those. I connected the cable and sound, made sure to power it with the usb cable, and it shows up with just a black screen. No matter what configuration it is in, it just shows a black screen. When I pull the HDMI cable out of allshare and put it into a laptop (acer chromebook), the image displays on the screen fine. So the VGA cable and adapter both work.
Allshare works on the projector with DVI, but not VGA, whereas a laptop works with both on the same projector. Any help?
Does that HDMI-VGA adapter support HDCP? I'm pretty sure there's been a change to the ASCD to require HDCP support on the "display" end.
kcrudup said:
Does that HDMI-VGA adapter support HDCP? I'm pretty sure there's been a change to the ASCD to require HDCP support on the "display" end.
Click to expand...
Click to collapse
I did see that, though I'm still on the old LJ02 firmware and furthermore the others I've heard with hdcp issues received a message saying that the device was not hdcp compatible. In my case I cant even see the allshare cast instruction screen (it's black) but I CAN see the dongle on my device and connect.
Hi,
My sister has a broken Samsung Infuse, the phone’s screen doesn’t work whatsoever other than the buttons on the bottom. she is able to plug it into her TV via HDMI, but when she uses the mouse, my TV says that it is unable to use pointer features on external devices. Any suggestions?