About this Guide:
In this guide you will learn how to Update your phone to the latest stock firmware available for your device for your region/country with Kies.
You will make your device status from Un-official To Official.
Your device will get Un-Rooted and all the changes you have made by rooting the device will be fixed .
If you have flashed wrong stock ROM or of other Region/Country this will fix it.
Fix software problems you face :fingers-crossed:
Please Dont Copy this to other forums and blogs. Give Direct Link to this Guide.
Click to expand...
Click to collapse
Note:
If you have Bricked your device or your device is Not booting Up This thread is Not for you.
For those who face Software problems are requested to try resetting your Phone to check if it fixes by it Before trying this.
Go to Settings--> Back up and reset --> Factory Data Reset
Click to expand...
Click to collapse
Difficulty level: Easy
Things you need:
A computer with Kies installed.
Internet Connection.
USB Cable.
A working Brain .
Of-course the device to be updated.
Note:
For Example I will be using My Device - Samsung Galaxy S3 Mini "GT-I8190N"
Step 1:
Open Kies
Go to Tools
Firmware Upgrade and Instantiation
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Step 2:
Enter Your Phone Model Number
Go to Settings --> About Phone, Find Your Model Number
Note: You Should Enter As it is in Settings i.e, "GT-I8190N"
Step 3:
Now Enter your device Serial Number
Note: Go to Settings--> Status--> Find Serial Number. :highfive:
Step 4:
Click "OK" to the Dialogue boxes
Now It will start Downloading Drivers etc to Flash..
Click to expand...
Click to collapse
Step 5:
Check "I have read all of the above Information."
Connect your device
Select "Proceed without saving"
Then Click "Start Upgrade"
All Moste Done! :highfive:
It will now download and flash the Firmware to Your Device
Click to expand...
Click to collapse
Step 6:
Your device will Reboot and Install the firmware.
Reboot and You're Done!
Congratulations! Your Device is Now Official!
Click to expand...
Click to collapse
Step 7:
Hit the thanks button
SadEff said:
PM me if you have some thing usefull to add to this thread.
Click to expand...
Click to collapse
Reserved
Screen Shots added..
Nice one, will be helpful for noobies
Why is 4.1+ needed in this case?
Good job.
However doing this with Odin is much easier. Odin does the same.
Also Odin does not require installation like Kies and very less disk space.
And some devices like Galaxy y GT-S5360 are not supported by Kies.
It is not only for 4.1+
I used this 1-2 months back on my SGS+ I9001 to install Android 2.3.6 from 2.3.4
Anyway, keep it up!
this method does not apply for all devices
some do not support firmware upgrade and initialization like gt-n8000
yep
Jaspreet.master7 said:
this method does not apply for all devices
some do not support firmware upgrade and initialization like gt-n8000
Click to expand...
Click to collapse
yes u are right... my GT-i9505 doesn,.t support initialisation... my device is already official but i want to make kies updates again...
1 silly question. will this method can be apply to old samsung device? i have samsung galaxy SL (gt-i9003) with CM11. thanks in advance
'GT-I9500' does not support initializing
iNITIALIZING MY DEVICE BREAKS ALL NETWORK CONNECTIVITY.IN MY CASE,
FOR EXAMPLE IF I WERE TO ENTER THE PRODUCT NAME AND SERIAL NUMBER OF MY SAMSUNG GALAXY S 111. KIES WOULD OFFER TO INITIALIZE MY PHONE WITH AN ANDROID 4,12 FIRMWARE THAT USES A MODEM/RADIO THAT USES AN EFS VERSION 1 PARTITION.
SINCE MY PHONEIS CURRENTLY ON ANDROID 4.3 AND CURRENTLY USES EFS VERSION 2 . GOING BACKWARDS TO THE OLD EFS STRUCTURE WILL CAUSE MY PHONE TO NO LONGER WORK AS A PHONE.ONLY WIFI WILL WORK
. WHEN I TRY KIES TELLS MR THAT IT WILL INITIALIZE WITH THE LATEST VERSION FOR MY PHONE PDA/MF6 /PHONE MA5/CSC MF1 (AFR) WHILE THAT FIRMWARE IS THE LATEST FOR (AFR) IT IS OLD AND ANY MODEM FOR GT-I9300 THAT PRECEEDED THE MG4 MODEM WILL NOT WORK UNLESS THE EFS FOLDER WAS BACKED UP AND THEN RESTORED AFTER REVERTING TO THE OLD EFS STRUCTURE.
THIS UNFORTUNATELY MAKES USING KIES TO INITIALIZE MY PHONE NOT AN OPTION.
Thx for this guide!
ML1 has a KNOX bootloader. You are doomed Nice guide but I prefer the old school Odin way!
Will this work for soft bricked att note 3 if my previous rom flashing didnt work? My new note 3 will not update to kitkat for some reason will this fix that also? Help please .
Sent from my SAMSUNG-SM-N900A using xda app-developers app
shane1981 said:
Will this work for soft bricked att note 3 if my previous rom flashing didnt work? My new note 3 will not update to kitkat for some reason will this fix that also? Help please .
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
If you have soft bricked u cant ho by this method as this method needs serial number of the phone.
Will it work for my other one ? Its rooted and i will not update to 4.4.2 .its still on 4.3 nb4 build .
Sent from my SAMSUNG-SM-N900A using xda app-developers app
---------- Post added at 12:57 PM ---------- Previous post was at 12:55 PM ----------
I can get the serial number off the other one its behind the battery so this may work ?
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Will this work for my AT&T I337 Stock MK2 Locked Boot loader ROM. I Followed the steps and it's telling me that it will restore to MDL ROM. Don't want to get that firmware upgrade error message. Thanks in advance
So I have an ace II ( Novathor phone like s3 Mini ) and I'm on Kitkat custom rom now.
Do you think this will work to come back to 4.1.2 official?
Shadowcareful said:
So I have an ace II ( Novathor phone like s3 Mini ) and I'm on Kitkat custom rom now.
Do you think this will work to come back to 4.1.2 official?
Click to expand...
Click to collapse
shane1981 said:
Will it work for my other one ? Its rooted and i will not update to 4.4.2 .its still on 4.3 nb4 build .
Sent from my SAMSUNG-SM-N900A using xda app-developers app
---------- Post added at 12:57 PM ---------- Previous post was at 12:55 PM ----------
I can get the serial number off the other one its behind the battery so this may work ?
Sent from my SAMSUNG-SM-N900A using xda app-developers app
Click to expand...
Click to collapse
Nothing Bad in trying! but Report if you succeed..
ytaida said:
Will this work for my AT&T I337 Stock MK2 Locked Boot loader ROM. I Followed the steps and it's telling me that it will restore to MDL ROM. Don't want to get that firmware upgrade error message. Thanks in advance
Click to expand...
Click to collapse
I dont hav experience with locked boot loaders and no idea about that. better i think you should accept that restore to MDL ROM i hope, because this method will restore to official stock like that comes from Samsung.
Question
Is there a way to determine what firmware is it installing?
Related
SAMSUNG Galaxy SIII I9305 ROOT ODEX/DEODEX
Odex/Deodexed & Zipaligned
Roted & Busyboxed
Recovery & Kernel - Stock
For flash via PC Odin
No Wipe or Wipe (manual)
No Custom Binary Counter increase
Android - Jelly Bean 4.1.1
PUSH THE BUTTON
How to flash:
Install Samsung Driver
Unzip ROM
Connect Device to pc in DOWNLOAD mode
Run PC Odin, and insert CODE_....tar.md5 into PDA slot
DOWNLOAD::
I9305XXALI9_I9305TLAALI6_I9305XXALI9_ROOT_ODEX
I9305XXALI9_I9305TLAALI6_I9305XXALI9_ROOT_DEODEX
Android - Jelly Bean 4.1.2
PUSH THE BUTTON
PDA:
I9305XXBMA4_ROOT_ODEX 746327
I9305XXBMA4_ROOT_DEODEX 746327
CSC_HOME:
CSC_I9305TPHBMA1_TPH Portugal
MODEM:
MODEM_I9305XXBLL5
BOOTLOADER:
BOOTLOADER_I9305XXBMA4
HOW TO FLASH:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Don't forget make backup EFS(IMEI)
DOWNGRADE BOOTLOADER I9305 after flash NEW!
Way to bring old bootloader found developer Odia. Is the thread fountainhead:
http://forum.xda-developers.com/showthread.php?t=2081748
* Need ROOT!
* Extract from the archive, connect the device to the USB debugging mode (System settings/Developer options/USB debugging) and run.bat
**********************
* After this you are can to flash old ROM with old bootloader
**********************
CHECK BOOTLOADER
CHECK_BOOTLOADER.zip
RESTORE_BOOTLOADER_I9305XXALI4.zip
Thanks. Any chance of starting a collection of the Official i9305 stock firmware?
Steve113 said:
Thanks. Any chance of starting a collection of the Official i9305 stock firmware?
Click to expand...
Click to collapse
http://www.sammobile.com/firmware/?page=3&model=GT-I9305&pcode=0&os=1&type=1
Thanks man!
Perhaps you may want to chage this though?
as i9000 said:
Connect NoteII to pc in DOWNLOAD mode
Click to expand...
Click to collapse
chippyuk said:
Thanks man!
Perhaps you may want to chage this though?
Click to expand...
Click to collapse
Yes, DONE, it all copy/past
All in a days work! lol!
What do you mean by stock? Is it stock for one particular provider, or stock as in no carrier software?
we need our own general and q&a thread. I dont like the fact that we have to post in amongst i9300 threads. Can we all ask the mods this? The more of uz the better.
What we want?
Our own I9305 general thread and q&a thread or atleast our own q&a thread. Lets all msg the mods please
Sent from my GT-I9305 using xda app-developers app
Thank you! Been waiting specifically for this!
Installed, awesome!
Still keen for a pure jellybean rom though.
.PIT File
Any chance of getting PIT file also?
After get root, don't forget make backup EFS(IMEI)
http://forum.xda-developers.com/showthread.php?t=1901098
what the hell!!!!!! u nailed it man
singlecell83 said:
What do you mean by stock? Is it stock for one particular provider, or stock as in no carrier software?
Click to expand...
Click to collapse
meaning that it is from the manufacturer, it's not a custom ROM
Cool, but how you did this?
GR0S said:
Cool, but how you did this?
Click to expand...
Click to collapse
Here in the forum you can learn if you have patience and be willing to
hey great job man
just a few questions: will i be able to do a backup or my current rom before flashing ? also is there an un-root option for warranty purpose ?
cheers
_ray_ said:
hey great job man
just a few questions: will i be able to do a backup or my current rom before flashing ?
cheers
Click to expand...
Click to collapse
without root no...
also is there an un-root option for warranty purpose ?
Click to expand...
Click to collapse
3th post...
as i9000 said:
After get root, don't forget make backup EFS(IMEI)
http://forum.xda-developers.com/showthread.php?t=1901098
Click to expand...
Click to collapse
Do i have to root before flashing this ? because if i directly flash this on my un-rooted stock phone then i wont be able to backup my EFS/Rom in case something goes wrong ? and if i do root my phone first then it will enable the flash counter which i want to avoid.
So what do you suggest I should do to prevent any disaster from happening ?
Thanks again for earlier reply
^^ Yor answer
And the dev claimed in OP that flashing this rom wont flash the counter
_ray_ said:
Do i have to root before flashing this ? because if i directly flash this on my un-rooted stock phone then i wont be able to backup my EFS/Rom in case something goes wrong ? and if i do root my phone first then it will enable the flash counter which i want to avoid.
So what do you suggest I should do to prevent any disaster from happening ?
Thanks again for earlier reply
Click to expand...
Click to collapse
Sent from my GT-I9305 using xda app-developers app
Here is a full guide on how to unroot and back to official stock for galaxy ace plus GT-S7500. it is useful also if you soft brick your phone
!!!BE SURE THAT YOU ARE FLASHING THE RIGHT FIRMWARE FOR YOUR VARIANT!!!Do it on your own responsibility! if you follow this guide properly u will be on the safe side
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Before we proceed, make sure:
1-You have installed your Samsung Galaxy Ace Plus S7500 USB drivers on your PC (the easiest way is to install Kies).
2-You need to enable USB debugging mode which is deactivated by default.
3-Your Ace Plus S7500 should have 70-80% charge remaining.
4-Your Ace Plus S7500 should be factory unlocked.
5-Backup your important data like Call logs, SMS and other data stored in phone memory in case if anything goes wrong, your data is not hurt.
6-Make sure that kies program is not running & disable antivirus.
This guide is only for Galaxy Ace Plus S7500. So don’t bother to try it on other devices.
How to do it:
Step 1) Turn OFF your mobile and go to Download Mode by pressing and holding the Volume Down + Home Buttons together for few seconds followed by Power button until you see Android logo, then volume up.
Step 2) Now open ODIN on your PC and connect your Galaxy Ace Plus S7500 to your computer.
Step 3) Once your phone is successfully connected to your PC, the ID:COM box on ODIN will turn yellow and will show the COM port number.
Step 4) unzip the downlowded file. u will get a Home.tar file.
Step 5) click on pda (in odin) and choose the file "Home.tar"
Step 6) check "Auto Reboot" and "F. Reset Time" options and make sure that "Re-Partition" is unchecked
Step 7) Click on Start button in ODIN window to start the installation process. The process will take few minutes to complete.
DO NOT UNPLUG USB CABLE WHILE EXECUTING THE PROCESS, YOU MAY BRICK YOUR PHONE!
Step 8) When the installation is completed, you read a green "PASS". your phone will restart (first boot will take a longer time so don't panic) :good:
Note: If you have a corrupted partition table (Odin says: "there is no pit partition" or "Re-Partition operation failed"), flash pit file (attached) (put it in pit window) with your firmware, in this case "Re-Partition" must be marked.
Note 1: if you want to reset your binary counter, use triangle away before unrooting. get the app from here
It is recommended to make hard reset after flashing to have a fresh official firmware
Odin troubleshooting: If Odin accidentally gives you "fail" try the following:
- Repeat procedure.
- Make sure that all actions of Kies are disabled from task manager.
- Change usb port.
- Try another usb cable (make sure it is the original).
- Try another Odin version.
- Uninstall and re-install driver.
- Try another computer.
Download Links:odin3 v_1.85
For Firmwares see second post
Don't forget to press THANKS & RATING buttons!
Firmwares link:
S7500 samsung-update.com
samersh72 said:
Reserved
Click to expand...
Click to collapse
hey i want indian firmware
Re: [GUIDE] Unroot, Flash official stock firmware on galaxy ace plus S7500
vivekmitra said:
hey i want indian firmware
Click to expand...
Click to collapse
The above firmwares in the op can match your need they are the newest firmware for s7500. for india see second post.
Sent from my Galaxy Nexus using xda premium
post unrooting
hey bro ! thanks for the instructions.. i wanted to ask if i unroot the phone to official firmware, will kies detect my phone and will i be able to install official ICS on it ?
Re: [GUIDE] Unroot, Flash official stock firmware on galaxy ace plus S7500
piyush25.2009 said:
hey bro ! thanks for the instructions.. i wanted to ask if i unroot the phone to official firmware, will kies detect my phone and will i be able to install official ICS on it ?
Click to expand...
Click to collapse
Sure, Kies will detect ur phone. But the latest official firmware for s7500 still 2.3.6 i will post ics firmware when it is released
Sent from my Galaxy Nexus using xda premium
ICS update
i heard ICS update for s7500 is available on kies ? is it there or not ?
Re: [GUIDE] Unroot, Flash official stock firmware on galaxy ace plus S7500
piyush25.2009 said:
i heard ICS update for s7500 is available on kies ? is it there or not ?
Click to expand...
Click to collapse
Not released yet. Take a look on sammobile.com where all new samsung firmware are posted there
Sent from my Galaxy Nexus using xda premium
kies error
bro i did as u instructed ! still kies give me error that this device is not supported
Re: [GUIDE] Unroot, Flash official stock firmware on galaxy ace plus S7500
piyush25.2009 said:
bro i did as u instructed ! still kies give me error that this device is not supported
Click to expand...
Click to collapse
Install new version of kies 16.0.0.400 uninstall the old and install the new Kies. It is a kies firmware
Sent from my Galaxy Nexus using xda premium
but i got soft brick then how it is helpfull?
vivekmitra said:
but i got soft brick then how it is helpfull?
Click to expand...
Click to collapse
soft brick means for example if your phone stuck into a bootloop (samsung logo stuck on screen) u can flash firmware via odin. please follow carefully instructions in the op and try it only on GT-S7500 variant :good:
Re: [GUIDE] Unroot, Flash official stock firmware on galaxy ace plus S7500
Second post updated :thumbup:
Sent from my Galaxy Nexus using xda premium
can you post firmware for egypt?
Mostsh said:
can you post firmware for egypt?
Click to expand...
Click to collapse
Egypt
pda: S7500JPLB1
CSC: S7500OJPLB1
Version: 2.3.6
reserved late
Re: [GUIDE] Unroot, Flash official stock firmware on galaxy ace plus GT-S7500
Great easy guide :thumbup:
Re: [GUIDE] Unroot, Flash official stock firmware on galaxy ace plus GT-S7500
Thank you :thumbup:
Sent from my Ace plus using xda premium
s7500t
Hi,i have s7500t and bricked,is there any link to download the firmware
Re: [GUIDE] Unroot, Flash official stock firmware on galaxy ace plus GT-S7500
a7an78 said:
Hi,i have s7500t and bricked,is there any link to download the firmware
Click to expand...
Click to collapse
Hard to find for T ! See this http://forum.xda-developers.com/showthread.php?t=2091409 it may help
Edit: some users report that flashing S7500L firmware goes fine on S7500T model.
Sent from my Galaxy using xda premium
After a bunch of work, I present to you WORKING CLOCKWORKMOD!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
*Big thanks to those of you who worked on the d2att, that code was invaluable for getting a working graphics driver and some unknowns I could not see.*
Confirmed on:
- SGH-i497 (ATT)
- SGH-T779 (T-Mobile)
You can also use this to get ROOT!
Requirements:
- Windows Computer with Samsung Drivers installed
- Odin if on Windows/Heimdall on Linux
- sdcard in the /sdcard slot
1. Download my Odin package here:
https://dl.dropbox.com/u/58849669/espresso10att/cwm_recovery_espresso10att_childofthehorn.tar.md5
2. Download SuperSu from Chainfire and copy to your sdcard:
http://forum.xda-developers.com/showthread.php?t=1538053
3. Open Odin (as administrator) and hit the "PDA" button, remember to uncheck the reset
4. Mount Device into Download Mode (PWR, Vol) and Hit go on Odin once it appears.
5. Once Finished, Reboot into Recovery
6. Backup your existing image
7. Flash SuperSu from SDcard
8. WInning.
TO RETURN TO STOCK RECOVERY USE THIS ODIN FLASHABLE:
https://dl.dropbox.com/u/58849669/espresso10att/espresso10_stock_childofthehorn.tar.md5
****In the process of doing this, I had to bust my /system in order to get the files required.
I would strongly appreciate if anyone can send me a copy of their boot.img and either a copy of their system.img or system.tar.ext4 made by clockworkmod. ****
Part of doing this was integrating everything with the d2-variant build chains in CM9 and CM10. Say thanks in the Thread if you like this or promote this thread so it makes it to the main page.
GITHUB: https://github.com/childofthehorn/espresso10att
Thanks Guys!
AWESOME!!!
Sweet, thanks so much, worked amazing on my T-Mobile Tab 2, got root awaiting a CM9 ROM. No rush, just happy to have my root on my plaything. Keep up the amazing work.
FINALLY! You just made my evening! Incoming Donation.
Confirmation number: 75052748C2563800A
---------- Post added at 09:43 PM ---------- Previous post was at 09:30 PM ----------
I have the ATT device as well, running a full stock rooted backup as we speak. I will get it uploaded when completed. Please hold...
Glad to hear it guys!
Very happy to know it works just as well on the T-mobile one.
I can get some custom ROMs going if I can get a copy of someone's /system and boot.img .
First goal is CM9 and then a migration to CM10.1 once that is pretty stabile.
Luckily for us, we have two amazingly complete CM sources with the d2att ( and nice d2 kernel chain!) and p5100 which cover most of our requirements as far as setup and drivers/libs.
Thank You for the support. If you like this, check out my site, say thanks, and/or vote this up onto the main site for a post so it is more visible.
I will be posting the original stock recovery.IMG in Odin flash able later tonight.
Sent from my Galaxy Nexus using Tapatalk 2
Childofthehorn said:
Glad to hear it guys!
Very happy to know it works just as well on the T-mobile one.
I can get some custom ROMs going if I can get a copy of someone's /system and boot.img .
First goal is CM9 and then a migration to CM10.1 once that is pretty stabile.
Luckily for us, we have two amazingly complete CM sources with the d2att ( and nice d2 kernel chain!) and p5100 which cover most of our requirements as far as setup and drivers/libs.
Thank You for the support. If you like this, check out my site, say thanks, and/or vote this up onto the main site for a post so it is more visible.
I will be posting the original stock recovery.IMG in Odin flash able later tonight.
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
If I was home I could help with my T-Mobile tab 2. Currently out stealing cars legally tho. Just glad for root and I'll help if I can in anyway.
Sent from my ThunderBolt using xda app-developers app
Amazing work! Thank you.
Will this wipe my current apps and data?
dmunjal said:
Amazing work! Thank you.
Will this wipe my current apps and data?
Click to expand...
Click to collapse
Not at all. You are merely flashing Root over your existing install. I also suggest that you make a backup prior to installing SuperSU. All of your non-native apps and contacts, etc are on /data and SuperSU does not touch /data at all.
Just posted up the Original Stock Recovery in an Odin Flashable if you want to return to stock.
Thanks for figuring this out. If you still need boot img or anything from the t-mobile version let me know. Also is it possible to add the t-mobile model number (SGH-T779) to the thread title, it would help others to find it.
Thanks again
Edit: I just saw that you added the model to the OP. Thanks again
Yeah I can extract system images from the CWM blobs if that is all you have. However a simple tar ball of /system and your boot.img would be helpful.
No more help at this time, however that might change with CM9 integration for T-Mobile.
Sent from my Galaxy Nexus using Tapatalk 2
Thanks a lot !, I had waiting a long time for this.
I have a GT-P5113 and I have the latest jellybean update (4.1.1). Do you know if this method works for my tablet, and if it doesn't, do you know a method for this model?
Sent from my GT-P5113 Galaxy Tab 2 10.1, the ipad pwning monster
Jooni said:
I have a GT-P5113 and I have the latest jellybean update (4.1.1). Do you know if this method works for my tablet, and if it doesn't, do you know a method for this model?
Sent from my GT-P5113 Galaxy Tab 2 10.1, the ipad pwning monster
Click to expand...
Click to collapse
^ This is covered elsewhere:
http://forum.xda-developers.com/showthread.php?t=1657056
BTW - The SGH-i497 has been added to CF-Autoroot by Chainfire. Now get rootness the easy way.
http://autoroot.chainfire.eu/
The T779 is in there as well.
For the T mobile users I will be putting together a Device tree for you guys as well. Let me know if there is anyone who wants to head up the CM9 port for the T779.
Childofthehorn
will this root work with the SCH-I915 Verizon ?
warlord002 said:
Childofthehorn
will this root work with the SCH-I915 Verizon ?
Click to expand...
Click to collapse
I honestly have no idea! That Model Number did not appear in the code, however the hardware is the same and considering the partition table is almost exactly like the D2 it just might.
IF YOU DO SO, YOU DO IT AT YOUR OWN RISK. I am not responsible!
Worst Case scenario, you will not be able to "wipe" your device in case of a failure easily until you perform a Manual update using Kies (usually the Samsung firmware has the recovery.img in it, but no guarantees!).
Get me a Copy of the Recovery.img or Full Odin Image for that device and I can probably make it work. The same would be true of the new SPH-P500 for Sprint. I do not have a Verzion version so I cannot test it. If you are a willing volunteer, let me know.
The Gtab2 10.1 LTE is Basically a Blown up Galaxy S3. However I am quickly finding that the AOSP D2 Kernel source doesnt like me much... erg.
Im out of town now but if no one shares their system I will dump mine when I get back sat morning.
Sent from my SGH-T779 using Tapatalk HD
Childofthehorn;
Get me a Copy of the Recovery.img or Full Odin Image for that device and I can probably make it work. The same would be true of the new SPH-P500 for Sprint. I do not have a Verzion version so I cannot test it. If you are a willing volunteer said:
I don;t know how to get that img or Odin image for you from my verizon tab 2 . but if you tell me how to do so i will surely try to make one ,
thanks
Click to expand...
Click to collapse
All the rooting steps are the same as the other gtab 2 10.1???
Yes. Basically.
These are the standard root steps for all Samsung devices with unlocked boot loaders.
Its the software and images that you are putting on your device which are different.
Sent from my Galaxy Nexus using Tapatalk 2
i think i messed with my bootloader.i cant acess in download mode .my firmware
Android Version:
4.1.1
Baseband Version
N7100XXALIE
Build Number
JR003C>N7100ZSALIA
since you did not provide much information,
you can go into recovery mode (if you can)
You can buy a JIG from ebay or make your own. there are tutorials about it. all you need is 1 usb cable to sacrifice and 3 100K resistors.
okay,,this phone cannot boot in download mode..as no download mode is detected.
i cant install cwm because i cant use odin to flash it..
Phone Detail
Model Number
GT-N7100
Android Version:
4.1.1
Baseband Version
N7100XXALIE
kernel version
3.031.-178067
Build Number
JR003C.N7100ZSALIA
Try to find a service center that offers a Jtag service. Last resort to get the phone working again afaik.
Moved to General Q&A as OP has a note 2 clone
gee2012 said:
Try to find a service center that offers a Jtag service. Last resort to get the phone working again afaik.
Click to expand...
Click to collapse
beside finding a service centre.anymore suggestions?
did you try recovery from firmware
Go to settings, power and turn the fastboot option off.
Then you should be able to go to bootloader using the power+vol thing
Also, you could go to developer, in settings, and enable the usb debug stuff
then try adb reboot bootloader
you can also search google for how to unlock bootloader you will get some ideas.
already tried..but stiil the same..when i get this phone.this phone is pre rooted.i cant even install cwm in it..i can only use stock recovery?
ynj said:
already tried..but stiil the same..when i get this phone.this phone is pre rooted.i cant even install cwm in it..i can only use stock recovery?
Click to expand...
Click to collapse
A note 2 clone? There's no development support so hope there's a service centre for clones.. Good luck.
If u are in stock recovery put the philz kernal+cwm match to your rom in the ext sd card and then choos the option update from the from sd card u will find philz + kernal zip select it.
It will help u I think
See the dr ketan thread of root and unroot.
Sent from my GT-N7000 using xda app-developers app
i tried all but..none work..any more suggestion?thanks for ur input.i cannot even acess download mode..which kernel would u all recommend.i cant flash it..
http://forum.xda-developers.com/showthread.php?p=18978158
Read this and u will find kernel match to your rom modem. You must remeber what modem you installed.
Sent from my GT-N7000 using xda app-developers app
---------- Post added at 03:38 PM ---------- Previous post was at 03:30 PM ----------
altanole said:
http://forum.xda-developers.com/showthread.php?p=18978158
Read this and u will find kernel match to your rom modem. You must remeber what modem you installed.
But before doing this all u must read the forum related to your problem. May be there is other good ways. Don't hesitate ask senior members by pm like dr ketan. So read before do anything wrong.
If u brick your fon then it will cost u a lot.
Regards.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Sent from my GT-N7000 using xda app-developers app
i tried that .and still the same.and whenever i install,it will will show install halfway and show installation aborted.and please note..that this phone is is pre rroted.so i do not know how the seller rooted for me
If its showing custom recovery and in the home menu there is not super su app then its not rooted. But if there is a super su app its rooted. And its will be a rare case. And most of the Phil'z kernal are bootloop fixed. See this.
http://forum.xda-developers.com/showthread.php?p=31310851
Sent from my GT-N7000 using xda app-developers app
okay..just found out this.
my phone is using mtk 6575 single sim phone.
anyone 1 know where i can find the recoveries?..i tried everything..and nothing seems to work..
and my phone has grren android with red exclamation mark.
Take it to a service centre which offers Jtag. That is your only chance to get it working again. Flashing kernels wont do anything if your bootloader is messed up.
Sent from my Xperia X10 using xda app-developers app
after i sent to service centre.they say cannot help unless i flash another rom with this phone..
i was thinking can i use the same recovery as mtk6575 devices?if possible please provide the links.
My phone real spec
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
You can not flash any ROMs if your bootloader is messed up meaning it won't load any kernels and let alone a ROM. Recoveries are parts of the kernel or the TOM but since you can't use any of those you won't be able to use a recovery. I'm sorry but seems like you've hard bricked your phone, making it as useful as a paperweight.
for the bootloader part..i did not break..it come with this intact..
Hi Guys..Just wanna share Latest Build of Android 6.0.1 Marshmallow on our beloved Samsung GALAXY S5.this is official firmware from Samsung that recently leak via Over The Air update in some regions..Enjoy...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download here
Android 6.0.1 Marshmallow
Odin 3.10.6
Installation
1. Make sure you have Samsung GALAXY S5 model SM-G900F (works on all region)
2. Download stock Android 6.x.x Marshmallow firmware from link above (not yet rooted)
3. Download Odin 3.10.6
4. go to Download mode by pressing and holding "Volume down"+"Home button" then Power On your device and you will automatically enter bootloader.
5. press "Volume up" to continue (no need to wipe/factory reset your device)
6. now extract and run Odin 3.10.6 on your desktop
7. click AP and load G900FXXU1CPB2.tar.md5 until finish
8. now connect your device via USB cable until device added
9. click "start" and wait until "Pass" appear in Odin
10. now wait your device until it completely finish
11. done and enjoy...
Some tips: flash stock Android 5.0 Lollipop firmware first before upgrading to Android 6.x.x Marshmallow firmware to avoid any issues.
Changelog
21-feb.2016 - first release.
- all Android 6.0.x changes including new TW launcher,new Emoticon,new Security features,new Browser with secret mode option,new Music Player,myGalaxy app,new Animation,improved Battery life and performance,amazing RAM management,NewOnTap GoogleNow features,and a lot more..
BUGS: - none
CREDIT:
komarov27 - for the firmware base
Samsung - for the device and firmware
XDA - for best Tech site
XDA Family - for support
reserved
sunajkram23 said:
reserved
Click to expand...
Click to collapse
assalamu alaikum
u re incredible dev among st all...since i m using ur sensation s5 rom for s3.
thanks..and lots of blessing..
mukdiwalaazim said:
assalamu alaikum
u re incredible dev among st all...since i m using ur sensation s5 rom for s3.
thanks..and lots of blessing..
Click to expand...
Click to collapse
alaikum salam..thanks for using my S5 Sensation ROM im done on that.and now im starting on this.
I can see that this is only for G900F, so this might be a dump question, but will this work on G900i? Thanks
pinoy_ako07 said:
I can see that this is only for G900F, so this might be a dump question, but will this work on G900i? Thanks
Click to expand...
Click to collapse
-NO!it will brick your device..for GALAXY S5 SM-G900F only.works well in all regions.
This is rooted?
Sent from my SM-G928F using Tapatalk
THX sir you are the ONE
---------- Post added at 10:02 AM ---------- Previous post was at 10:01 AM ----------
faurash said:
This is rooted?
Sent from my SM-G928F using Tapatalk
Click to expand...
Click to collapse
It's stock,
can u post dialer and messages screen shot or make a video on all samsung apps
thanks nice one @sunajkram23
Hi,
what about root in this ROM?
Downloading...
Sent from my SM-G900F using XDA Free mobile app
is there a way to root this?
Well if there was any idea of a root
ad0dh67 said:
is there a way to root this?
Click to expand...
Click to collapse
-stock for the meantime..root will up soon.
sandeepsivia said:
can u post dialer and messages screen shot or make a video on all samsung apps
thanks nice one @sunajkram23
Click to expand...
Click to collapse
-yes see first post.
-sunajkram23
This is beta ?
is this the beta? after flashing, is the recovery still there?
t0m2k said:
is this the beta? after flashing, is the recovery still there?
Click to expand...
Click to collapse
-leak via OTA in other region mate.i suggest that flash android 5.0 stock firmware and recovery first like mine.to avoid any issues.
sunajkram23 said:
-leak via OTA in other region mate.i suggest that flash android 5.0 stock firmware and recovery first like mine.to avoid any issues.
Click to expand...
Click to collapse
which one do you recommend exactly?
1. Flash Stock via Odin, then flash recovery again via odin, and then in recovery this zip one here?
2. what about BL/Modem from the BETA thread? at the moment im on BPA2...