THIS IS NOT COMPATIBLE WITH CM11 NIGHTLIES AS OF 5-8-2014 BUILD DATE.
I'll update it to be compatible as soon as I can.
Moretz - Final
"She's done, this is the end of the line."
Features:
- Linux 3.0.101
- Ultra KSM 0.1.2.2
- Dynamic Read Ahead
- FRandom
- Dynamic FS Sync (by faux123)
- Android Low Memory Killer
- SLUB (back ported from Linux 3.3 by faux123)
- Voltage Control (OV/UV)
- Tweaked min/max allowable voltages
- Tweaked CPU bus speed (added 400MHz)
- Clock Speeds: 192MHz - 1.78GHz
- 3D GPU Clocks Up to 320MHz
- 3D GPU Max Freq Control (Kernel Sysfs: /sys/kernel/gpu_control)
- 2D GPU Clocks Up to 266Mhz
- 2D & 3D Bandwidth Increase
- KGSL (GPU) Tweaks
- Added Scheduler: BFQ v6, SIO, V(R)
- Added Governors: Ondemand 2 Phase (modded), SmartassV2 (modded), Badass 3 Phase, Lionheart (tweaked)
- USB Fast Charge
- MSM MPDecision (Enables hotpluging across all governors) - modded for dual core CPU
- Smart Zipalign at Boot
- SQLite Optimize Databases at Boot
- Sync CPU governors (thanks elbermu)
- Sync CPU frequency policies (thanks elbermu)
- sweep2wake
- BLN support
- Mutex tweaks
- TCP network tweaks
- Other small tweaks / fixes / enhancements
Compatible ROMs:
CyanogenMod 11.0
(Guinea pigs feel free to test others and report back ...)
Thanks:
Team Chopsticks
Project Mayhem
Team ROOK
Cyanogen
InstagatorX
roger_n
The Muppets
ktoonsez
elbermu
toyes
mindmajick
franciscofranco
Your Mom
mtdew
Cl3Kener
faux123
Special Thanks:
To everyone in the SR forums, this is my last project release for you guys. You've been fun, you've been jerks and everything in between. It's been a really fun ride and I've enjoyed every minute.
Seriously, you guys are awesome. Thank you.
Sauce: https://bitbucket.org/carvsdriver/android_kernel_samsung_msm8660-common/
Code:
[CENTER][B]Installation Instructions:[/B]
Download
Nandroid
Flash
Reboot
Enjoy![/CENTER]
Download Moretz-Final Here
Link: http://d-h.st/CoU
MD5: 50055619ca662019ec0f5dffe32a07d8
Click to expand...
Click to collapse
One more for any break/fixes.
For the record, I only tested this for like 10/15 minutes ... please report any bugs with a last_kmsg and/or logcat. I will be around to fix critical problems. So it's tentatively a final version pending bug reports
CVD at it again. Kudos for keeping the skyrocket a beast.
Oh lord Jesus its a kernal ! thanks !! @car vs driver
AndroidGee209 said:
Oh lord Jesus its a kernal ! thanks !! @car vs driver
Click to expand...
Click to collapse
You're welcome sir.
Booted fine on latest carbon nightly. Thanks, man.
SGH-I727 Peace
This will work on any CM11 based ROM right?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
DSDONE said:
This will work on any CM11 based ROM right?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
as noted in the OP, only cm11 has been tested but only for 15 minutes. YMMV
test and see for yourself!
I can say for sure that carbon nightly boots fine
Sweet! If it boots on carbon ROM, I feel that it will boot on AOSB...
Sent from my SAMSUNG-SGH-I727 using Tapatalk
It'll boot on any of the CM based ROMs, they all use the same 3.0.y kernel. The only caveat is if any of the non-CM distributions have modded the kernel to include specific features for their ROM.
Flash it and find out. Worst case is that it doesn't boot or runs like dirt for some reason. You can always just revert back to whatever kernel your ROM has by reflashing it.
I don't use any of the other ROMs out there, so I cannot test or verify that all features work. So to be safe and have less of a headache, I don't officially support them (even if they do work perfectly well).
Confirm, boots fine on AOSB 4.4.2 ROM! I'll continue to run it... Seems stable... Good job devs! ?
?
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Works great on Beanstalk as well! So glad there has been an update!
Another kernel for our skyrockets, i was waiting for this one since i had KitKat. Great job once again. :good:
2 questions,
Q1: Are you using source from CM?
Q2: Do you even plan something with Linux 3.4?
I tried your kernel with the lpa.decode fix from my post in the CM 11 thread and I noticed that audio will stutter for a split second every now and then. It works perfect with the CM kernel, but I am getting an error on a logcat of "AudioPlayer This indicates the event underrun case for LPA/Tunnel." I am not sure if the kernel is set to use lpa and since the fix disables it from build.prop if that is what is causing the error, but I was wondering if you could help? Thanks again for your support.
Care to elaborate on what the LPA fix is?
Sent from my Nexus 5 using XDA Premium 4 mobile app
They are changing one line in the build prop to disable lpa. Pretty sure its a workaround not a fix.
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Oh... What exactly is that addressing?
Sent from my Nexus 5 using XDA Premium 4 mobile app
Something about their audio issues I wouldn't know much more since Google play music has been flawless for me for some time now.
Sent from my SAMSUNG-SGH-I727 using Tapatalk
car vs driver said:
Oh... What exactly is that addressing?
Sent from my Nexus 5 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It is addressing the sudden pop when playing music through Apollo, DSP Manager effects not working correctly and certain Bluetooth streaming. If I change the "lpa.decode=true" in the /system build.prop to false, it fixes all the problems that I've had with CM 10.2 and CM 11. When I flash this kernel, it has a sudden stutter in music with that logcat message I posted earlier. Some users who have tried the fix said it fixed these issues with them too. I did email @roger_n about this possible permanent fix so it could be merged with the CM nightlies, but so far no response.
@TheCybertronian, I have tried Google Play Music in the past when this issue came up, but the sudden pop when skipping songs would still come up occasionally when a song would start to play. Granted this was awhile ago since I last tried Play Music with lpa enabled, but this was the only solution so far that worked with Apollo and DSP Manager.
Related
NOW WITH AUDIO FIX BY TurboniumX and LATEST BATTERY FIX!
This is a ROM repack of the CM7 flavor PNK by PhunyCow including a lagfix and other modifications.
It has been repacked to use my patched kernel which makes it run on the Inspire 4G.
It's just to get the Inspire 4G the needed CM7 fix until the TeamDesire releases the new kernel.
Huge thanks and credits go to the CM7 team and PhunkyCow for the original ROM.
For further instructions and information on this ROM: [ROM][PNK] "Killer Llama v2" ~ Occasional & funky CM7 (Gingerbread) builds
Kernel source is available here: https://github.com/hrkfdn/linux-htc-ace
IF YOU HAVE WIFI PROBLEMS PLEASE REBOOT!
Simply flash the ZIP with ClockWorkMod >3.0.0.5 after fully wiping your phone.
(Also format /system partition: mounts and storage->format system)
Download
CHANGELOG:
phunkycow said:
"Killer Llama v2" (12/03/2011)
- Fixed camera.
"Killer Llama" (12/03/2011)
- Built today with the latest commits (more info @ cyanogenmod review section). Latest included commit: I625098b8
- Usual optimizations applied.
- (Hopefully) No more extreme battery drain (major thanks to hrkfdn, mad-murdock, kali- and everyone else involved in solving this!)
- Removed FM radio app (due to battery drain).
- Switched to hrkfdn's kernel with the drain fix.
- Hopefully increased smoothness a bit (minor boardconfig change - could be a placebo effect, I'm pleased eitherway ) <~ Removed in v2 as it was causing camera problems.
"Irksome Jalapeño" (02/03/2011)
- Built today with the latest commits (more info @ cyanogenmod review section). Latest included commit: I40bb0d4d
- Usual optimizations applied.
- Fixed white screen on incoming calls.
- Resolved issues with ringtones/notifications/music.
"Groovy Hippo" (01/03/2011)
- Just a last-minute release for the "can't turn off data HELP!" problem.
- Built today with the latest commits (more info @ cyanogenmod review section). Latest included commit: I510c223a
- Usual optimizations applied.
"Extra Fluffy" (25/02/2011)
- Extra Fluffy! Squeeze your precious DHD like never before and show it some love (just like Elmira)
- Built today with the latest commits (more info @ cyanogenmod review section). Latest included commit: Didn't look Built it around the afternoon.
- Usual optimizations applied.
- Circle mods have been removed as it was a pain in the *ss to make the changes I wanted to, plus CM7 includes a battery percentage by default now (can be found @ the CM Settings).
"Crispy Duck" (11/02/2011)
A few highlights:
- Built today with the latest commits (more info @ cyanogenmod review section). Latest included commit: I8e567040 (10/02/2011 05:40).
- Usual optimizations applied.
- Extended AdamG's script a bit further and added more Circle Battery Mods! Included are: A, B, C, D, F, I, K from this thread. Many thanks to Fightspit for the icons!
- Updated hosts file.
- Fixed (hopefully again) Adhoc - still awaiting feedback.
Click to expand...
Click to collapse
Downloading now. Thanks
Edit: sound is alive on cm7. Awsome!
Sent from my Telus Desire HD using Tapatalk
umm no audio...
edit - reboot solved it. Audio is slightly tinny and volume seems to be low.
I love it but really really miss sense is it possible to install sense somehow on cm7?
I had a problem getting wifi working so I nandroided back until I have time to fiddle with it tomorrow.
I also had a problem with wifi - the reboot that fixed audio also fixed the wifi issue.
*
My two wishes for this are now:
The camera app that came with inspire - I think it was superior
Sense
Have you tried rebooting? First boot WiFi won't work. It's a common problem..
hrkfdn said:
Have you tried rebooting? First boot WiFi won't work. It's a common problem..
Click to expand...
Click to collapse
LOL well I know that NOW
I'll reload in the morning my battery is nearly dead.
randomblame said:
I also had a problem with wifi - the reboot that fixed audio also fixed the wifi issue.
*
My two wishes for this are now:
The camera app that came with inspire - I think it was superior
Sense
Click to expand...
Click to collapse
randomblame if you want Sense you don't want CM7. The Camera is part of the HTC framework and can't be added.
Meh I can want a lot of things that are not possible - it's my god given right as an xda forums member
Do I have to flash a different radio in order to do this?? I did the ace hack kit and did the little upgrade thing and now I'm on coredroid Tom with telus kernal
This rom is awesome. Installed, rebooted and everything worked. No need to flash anything else
hrkfdn said:
Simply flash the ZIP with ClockWorkMod 3.0.0.5 after fully wiping your phone.
(Also format /system partition: mounts and storage->format system)
Click to expand...
Click to collapse
What is the difference between using 3.0.0.5 and 3.0.0.6?
Is anyone having issues downloading from the Market after flashing this ROM?
I have updated the ROM to "Extra Fluffy". Also I have applied the TurboniumX audiofix and installed a newer version of the hrkfdn kernel with up to 1.5GHz OC.
I lost wifi completely after this update. Tried rebooting 3x still shows "error" under wireless settings wifi...thoughts?
Sent from my Desire HD using XDA App
paranoid__android said:
I lost wifi completely after this update. Tried rebooting 3x still shows "error" under wireless settings wifi...thoughts?
Sent from my Desire HD using XDA App
Click to expand...
Click to collapse
Ah crap. Problem fixed, I have uploaded a fixed ROM. You can either download it again or simply push the attached file (extract zip first, obviously) to /system/lib/modules and reboot.
Looking forward to giving this a spin. Would you happen to have any screen shots? Didn't see many on the original thread in the desire HD forum. Secondly, is there a huge difference in battery between 1.2 and 1.6 kernels?
lrs421 said:
Looking forward to giving this a spin. Would you happen to have any screen shots? Didn't see many on the original thread in the desire HD forum. Secondly, is there a huge difference in battery between 1.2 and 1.6 kernels?
Click to expand...
Click to collapse
I could give you a screenshot, but I only have a Desire HD, which is why I rely on you guys to test it ;p
It's basically just CM7 with a lagfix that fixes UI delays on some devices.
It definitely does make a difference, can't tell you how significant it is, though. It's up to you what frequency range you want to use (change with SetCPU).
I don't believe that 1.5GHz is really necessary, but it was requested quite often.
hrkfdn said:
I could give you a screenshot, but I only have a Desire HD, which is why I rely on you guys to test it ;p
It's basically just CM7 with a lagfix that fixes UI delays on some devices.
It definitely does make a difference, can't tell you how significant it is, though. It's up to you what frequency range you want to use (change with SetCPU).
I don't believe that 1.5GHz is really necessary, but it was requested quite often.
Click to expand...
Click to collapse
Awesome, thanks for the reply. Last question, well, probably Do these issues apply:
What's not working
- Camera Auto-Focus when shooting videos.
- Camera Manual-Focus when shooting pictures.
- Video playback 2/3 blue in portrait.
Thanks!
lrs421 said:
Awesome, thanks for the reply. Last question, well, probably Do these issues apply:
What's not working
- Camera Auto-Focus when shooting videos.
- Camera Manual-Focus when shooting pictures.
- Video playback 2/3 blue in portrait.
Thanks!
Click to expand...
Click to collapse
Those are known CM7 bugs also occuring on the Desire HD. They are being worked on (I hope )
Battery
I seem to be getting about half the battery life with this ROM as I did with the sense ROMs, is this normal? or just me?
Seems like idle battery use is always about 18 to 30mA, at least for me. Anyone else?
Basic with a Twist SGS4G KJ6 Kernel
BML, don't flash if you have partitions converted to MTD.
Use at your own risk, I take no responsibility for anything that may happen to your phone because of this kernel.
This kernel is for those who don't want to be on the very cutting edge (CM7) but rather want stability without sacrificing too many recent features. It is based mostly on Bryan's 0.0.2d commit that supposedly never had problems with silent reboots. I made some changes to the config to bring it even more to the standard Samsung VibrantPlus in terms of hardware settings, but at the same time to optimize it for speed. I will add only tried and true features to this kernel, the ones that other kernel developers have used successfully.
Special thanks to bhundven (Bryan), FBis251, TeamAcid.
Features
initramfs from TeamAcid, including CWM5, SuperSU, forced ext4, etc.
Usual CIFS, TUN. I didn't include FUSE, if anybody needs it let me know.
BLN. Use BLN Control app from market to activate.
Voodoo Sound so paid app is not needed. Voodoo Sound app from market is required. Once installed, enable Smart Amplifier, it's the best thing you can do to improve music listening experience with our phone.
jhash3 for faster hash calculations. Used widely across the kernel, especially in networking.
OC/UV support with extended frequency table. Added 600Mhz, 900Mhz, 1.1Ghz, 1.2 Ghz, 1.3 Ghz, 1.4 Ghz. Use SetCPU or Xan's Voltage Control to enable and control frequency and voltages. Tegrak can be used only with no-OC/UV version.
ondemandX and smartassV2 governors. One of these should probably be preferred over stock ondemand. Change with SetCPU or similar.
TinyRCU. More lightweight version, it fits better our single CPU system.
Swap support, although I don't recommend using it.
SIO and BFQ I/O schedulers in addition to noop, deadline, and cfq that we already have.
Install
Flash with CWM or SGS Kernel Flasher. ODIN version is available only for OC/UV kernel.
Download
CWM:
v1.1.3
v1.1.3 (no OC/UV)
v1.1.2
v1.1.2 (no OC/UV)
ODIN:
v1.1.3
v1.1.2
Notes
* OC/UV version is very conservatively undervolted to -25mV. The preset voltages are still higher than on regular I9000, which has the same CPU. I'm running additional -50mV (total -75mV) for all frequencies without issues, but you may have them, every CPU is different!
* It is recommended to create a CWM recovery file before modifying voltages. This option is available in both SetCPU and VoltageControl.
* OC-ing to 1.4 Ghz is not recommended, especially for extended periods of time.
* Voodoo ext4 conversion, or "lagfix", is enabled and forced by default. There is not way and no need to go back to RFS.
Source
www.github.com/AntonX
Changelog
1.1.3
CWM 5.0.2.8 (blue) in initramfs
Disabled a little more of Samsung debugging
1.1.2
Minor changes to initramfs voodoo extension scripts
More neutral boot logo
1.1.0
Initramfs script will not force su update
Couple of small changes
1.1rc2
Few small changes
1.1rc1
Added BFQ and SIO I/O schedulers
Switched to TinyRCU
Added Swap support
Small change to Vibetonz
1.0b5
Some changes to OC/UV
Better BLN fix
Increased write timeout for bad SDHC cards
Added ondemandX and smartassV2 governors
Renamed the title, it's becoming less and less Basic...
1.0b4
Added native OC/UV support
1.0b3
Minor BLN changes
Replaced jhash.h with jhash3 code
Updated initramfs with SuperSU 0.88
1.0b2
Added BLN, first attempt
1.0b1
Original release
Let me be the first to push you....please consider BLN lol, that would be awesome!
Could you point me to the right repository/branch?
I'm curious to see your changes and I'm probably not looking in the right place on github.
Please add BLN
bhundven said:
Could you point me to the right repository/branch?
I'm curious to see your changes and I'm probably not looking in the right place on github.
Click to expand...
Click to collapse
Well, I didn't upload anything yet. If you tell me how to control the frigging repository from Windows I'll do it right away
But seriously I want to make absolutely sure that this kernel doesn't have this nuisance of silent reboots. Because it they still present there is no need to have this kernel.
No matter what happens, if Vooodoo sound works without problems, I'll give you the code if you want it.
AntonX said:
Well, I didn't upload anything yet. If you tell me how to control the frigging repository from Windows I'll do it right away
But seriously I want to make absolutely sure that this kernel doesn't have this nuisance of silent reboots. Because it they still present there is no need to have this kernel.
No matter what happens, if Vooodoo sound works without problems, I'll give you the code if you want it.
Click to expand...
Click to collapse
I'm about to post something to my cm7 thread, so heads up.
But stock kj6 kernel (if you download it from opensource.samsung.com and apply a few of my changes to fix tfsr and add initramfs) still has the same reboot issue.
I'm gonna start comparing some of the code from the froyo kernel to see wtf is going on. I fixed a problem with rild and random reboots are back.
I'm finding that the problem is related to suspend. The reboot happens when everything quiets down.
AntonX said:
If you tell me how to control the frigging repository from Windows I'll do it right away
Click to expand...
Click to collapse
Haha, I don't even know. Don't use Windows?!?
put BLN in!!!! (i would do it myself, REALLY, i would but i don't know how)
bhundven said:
But stock kj6 kernel (if you download it from opensource.samsung.com and apply a few of my changes to fix tfsr and add initramfs) still has the same reboot issue.
Click to expand...
Click to collapse
I'm operation on the assumption that 0.0.2d never had silent reboots. Nobody ever reported having them with this version. I have never ever experienced a reboot with it myself. That's why I took it as the base.
I haven't really looked what you did right after 0.0.2d. Seems like you switched to aries config instead from vibrantplus. Any particular reason? Anyway, I reverted it back and even slightly more back. Then you did some clean up and modified bunch of code. I don't care about cleaning somebody else's code like this. Unused functions and variables will be optimized out by the compiler anyway. To get rid of annoying warnings I just used -Wno-unused switch to gcc in the Makefile.
So - hard to tell what's happened between 0.0.2d and 0.1.0 (or 0.1.1?), but something must have happened. Too many people reported it to support this.
Great initiative Anton!
Flashing it on 2 devices. I will update in 3 days.
Sent from my SGH-T959V using XDA
Anton
Just flashed. I'm fully charging up right now. I'll run it for a day to check on battery life and do some restores to make sure all that is good to go. Including voodoo is a nice touch. A already have the paid app because the headphone amp is something I can't live without but really nice for those that haven't used it to check it out. I have never had a reboot on 2d so hopefully this will maintain that tradition. Nice work.
is voodoo sound fix better than the beats audio??
m0bstr said:
is voodoo sound fix better than the beats audio??
Click to expand...
Click to collapse
Voodoo is hardware. Beats audio sodtware
Sent from my SGH-T959V using xda premium
Voodoo Sound, awesome!
Thanks man.
Sent from my SGH-T959V using XDA
I've never used voodoo sound before, but wow I was missing out..... Separation seems slightly better, clarity, just everything is awesome... And being able to adjust output gain is nice too.
Also, so far, no reboots.
Sent from my SGH-T959V using XDA
Finally a kernel w/ Voodoo Sound! I've been using the paid app for awhile but the module doesn't load on boot sometimes plus I've always wondered if there might be a difference between the app loading the module vs. the module built in to the kernel. I've gotten really use to BLN though (hint-hint)... thank you!
Sent from my SGH-T959V using xda premium
Another request for BLN. Hope we have enough voters!
Figures, as soon as I jump ship voodoo sound comes out to play...
Sent from my Galaxy Nexus using XDA
tehgyb said:
Figures, as soon as I jump ship voodoo sound comes out to play...
Sent from my Galaxy Nexus using XDA
Click to expand...
Click to collapse
gnexus lol
so far not a single problem, touch wood...
This is AOKP JB-MR1 Milestone 2 built from source:
Typical disclaimers apply.
If used as daily, provide constructive reports. Current known problems listed below.
This is mainly being released for you all to try out some of the 4.2.2 features. Have fun, No whining.
ROM Changelog:
July 27
-Rom: upstream sync 7/27
July 7
-Rom: upstream sync 7/7
-Kernel: Update to 3.0.85
-Kernel: update bfq to v6r2
June 30
-Rom: upstream sync on 6/29
-Kernel: Update to 3.0.84
-Kernel: see github for others.
June 24
-Rom: upstream sync 6/23
-Kernel: update 3.0.83
June 9
-Rom: upstream sync 6/8 to RC5
-Kernel: update bfq to v6r1
June 2
-Rom: upstream sync 6/2
-Kernel: additional power button doublepress fix(tbalden)
May 27
- Rom: upstream 5/27
- kernel: revert everything between doubleshot: defconfig update and
Increase values to hopefully help with screen/brightness issues.
May 26
- Rom: upstream 5/26
- Kernel: Update to 3.0.80
- Kernel: various updates(check github)
May 18
- Rom: upstream sync 5/18
- Kernel: Update to 3.0.78
- Kernel: compile with CodefireX GCC 4.8
- Kernel: update mpdecision
- Kernel :vidc and framebuffer updates
- Kernel: Replace bmcdhd with original from fork (to hopefully fix wifi tethering).
May 12
- Rom: Upstream sync 5/12
- Kernel: Update to 3.0.77
- Kernel: Testing some stuff to see if will help screen drain.
- Kernel: Back to SLUB.
- Kernel: Compile with CodefireX GCC 4.8 toolchain.
- Kernel: Revert battery driver update. Seemed to report inconsistent data.
April 28
- Rom: Upstream sync on 4/27
- Rom: Fix wifi tether? (Shows visible for me on other devices: Open, WPA and WPA2). Confirm.
- Kernel: Update to 3.0.75
- Kernel: Compile with CodefireX toolchain again.
- Kernel: Add and compile QCOM crypto.
- Kernel: Add and compile cpu based sync driver.
- Kernel: Finally using SLQB.(forgot about it)
April 23
- Readd ril header, users can get signal again whooppee!
April 22
- Rom: Upstream sync
- Rom: disable some things in Boardconfig
- Rom: Update headers in device tree.
- Kernel: Compile with stock toolchain.
- Kernel: updates to vidc, andreno, genlock and framebuffer.
April 20
- Rom: upstream sync as usual.
- Kernel: update to 3.0.74
- Kernel: Reapply update HTC baterry driver.
- Kernel: Minor edits and additions to intellidemand.
- Kernel: Enable intellidemand 'Browsing mode".
April 14
- Rom: upstream sync as usual.
- Rom: Remove builtin FM Radio, didnt work. Use SpiritFM it works.
- Rom: CFlags back to defaults.
- Kernel: adreno, kgsl updates(CAF).
- Kernel: Update HTC baterry driver.
- Kernel: revert mpdecision update(may have been cause of black screen according to Albinoman887.
- Kernel: update bcmdhd driver(5.90.125.94 to 5.90.195.114).
- Kernel: Add and use jRCU.
April 8
- Kernel update to 3.0.72
- Kernel: fifo ioscheduler
- Kernel: noop updates
- Kernel: update mpdecision
- Kernel: compiled with CodefireX 4.7 toolchain(upstream + linaro build)
- Rom: upstream sync
- Rom: CM Stuff(Apollo, LockClock, CM File Manager) upstream sync
- Rom: switch to arco display-legacy & media-legacy
- Rom: change arm CFLAG optimizations from -O2 to -O3
- Rom: change thumb CFLAG optimizations from -Os to -O3
Mar 31
- Upstream sync to Build 6
- Update kernel to 3.0.71
- Kernel: Fix power button double press issues(tbalden). Works way better than before but sometimes will "double press".
- Kernel: Update sound drivers(scverhagen & xmcwildchild)
- Kernel: Update bluetooth drivers(braccoz)
- Kernel: correct some thermal control settings
- Phase frequency changes for badass and intellidemand
- Apollo and CMFile Manager upstream sync.
- Using tbalden's camera wrapper.
- 1080p video playback(though choppy looking) in gallery app.
Mar 24
- Update touchscreen driver in kernel (Braccoz)
- Update vidc driver in kernel (tbladen)
- gtalk no longer crashes trying to initial audio/video call.
- voip fixed(1 confirmed)
Mar 23
- Upstream Sync
- Update CM FileManager, Trebuchet
- Switch back to Apollo from CyanogenMod
- Add LockClock from CyanogenMod
- Modify power_profile to reflect better battery draw.
- Change audio-caf, media-legacy, media and display-legacy to Team-Hydra's sources.
- Voip calling fixed?(didnt work)
Mar 18
- Alt/shift Leds now turn off when keyboard slide in.
Mar 17
- Upstream sync
- New superuser working properly
- Alt/shift light 'work' (see buglist for details) do not complain about this. I will choke you.
- Accidentally used basic boot animation.
Mar 12
- Camera resolved... copy issues on my part(using the right media_profile.xml now). Whoops?
Mar 10
- Sync Upstream
- Nothing else major.
- Camera still meh.
Mar 7
- Camera orientation corrected (partial thanks to Evervolv team).
- Broke FFC, sort of... oh well.
Mar 5
- Upstream sync to Build 5 (bugs fixed)
- Trebuchet and CMFile Manager synced upstream
- Apollo by BigSplit
Feb 25
- Upstream sync.
- Add 1080p (thanks to scverhagen).
- www/com key work.
- Keyboard behaves properly now.
- Keyboard backlights turn on on slide out.
Feb 18
- Fixed lack of audio... bumping back to beta.
Feb 17
- Upstream sync to 4.2.2
- Bluetooth turns on and is discoverable
- Added Apollo, CM File Manager & Trebuchet
- Removed NovaLauncher
Feb 13
- Upstream sync(essentially anything that seems fixed came from the framework update... the same one that had me stumped a few days)
- Kang in code for FFC (forgot in the initial)
- Kang in code for keyboard backlight
Feb 9
- Initial alpha Release for your entertainment.
Click to expand...
Click to collapse
This Rom can use kernels from scverhagen.
If you have any problems booting, use one of his stable kernel.
Buglist:
JB-MR1 Milestone 2 Rom:
Shift/Alt keys stay active after keyboard is slid in. Leds turn off though.
Click to expand...
Click to collapse
Fixed Bugs:
JB-MR1 Milestone 2 Rom:
Switching to video recording using FFC / switching to ffc in video mode crashes Camera/Gallery.
Small ones that you guys dont know of.
Google glitchy preview
Cell signal reporting
Keyboard backlight
FFC
No headphone jack audio output?
Forgot to add Apollo and CM File Manager back (not really a bug, but whatever).
Bluetooth.
Audio borked. Dropping back to alpha until working again.
www/com key not functioning.
key mapping misbehaving.
1080p -_-
Camera(both) preview sideways on initial image.
gtalk crashed on video/audio calls
multi-touch apparently
Voip?
Click to expand...
Click to collapse
Download:
JB MR1 Milestone 2 ROM (MD5: 4fee6e8eb67a397c27fdf6903a308321)
JB Gapps(December 12, 2012)
JB Gapps(March 3, 2013)
Sources:
My Github
Thanks
scverhagen for his kernel work and 1080p recording!
tbalden for random various kernel fixes.
braccoz for just knowing how to fix almost everything.
xmcwildchild for tips and such.
sultanxda for keeping a repo thats pure linux updated to the latest.
johnnyslt for random fixes and patches for msm 8660 kernel.
Obviously: AOKP & CyanogenMod.
TeamDS's, Evervolv's, Team-Hydra's Githubs
BigSplit for his Apollo mod(when I used it).
Users who report problems and deal with them until magically fixed.
Click to expand...
Click to collapse
Wow is it 4.2 JB or 4.1 with the features of 4.2?
SKAm69 said:
Wow is it 4.2 JB or 4.1 with the features of 4.2?
Click to expand...
Click to collapse
4.2.1 built from source. Been working on it since January. Hoping to make things work better.
I have sorted out(with the help of reviewing evervolv and CM code) some problems I got initially... but I dont use this device as a phone. So here is what I have for testers.
[ROM][Feb-9-2013[4.2.1] AOKP JB-MR1 Build 2 [Alpha]
SilverL said:
4.2.1 built from source. Been working on it since January. Hoping to make things work better.
I have sorted out(with the help of reviewing evervolv and CM code) some problems I got initially... but I dont use this device as a phone. So here is what I have for testers.
Click to expand...
Click to collapse
Umm wow...your da BOMB ???
Sent from my iPad using Tapatalk HD
that's a surprisingly small buglist for a first release! nothing major is broken...amazing work silverL!
anitgandhi said:
that's a surprisingly small buglist for a first release! nothing major is broken...amazing work silverL!
Click to expand...
Click to collapse
Because you guys need to find me some.
Re: [ROM][Feb-9-2013[4.2.1] AOKP JB-MR1 Build 2 [Alpha]
Thanks, that's brilliant. I'll see what I find
cool!
SilverL said:
Because you guys need to find me some.
Click to expand...
Click to collapse
Rotation seemed glitchy with initial flash. Went in cleaned cache and dalvik cache and flash scverhagen r9 kernel. Better auto rotation but google now search results show up glitchy, half screened. One side of the screen showing up normal, the other side repeating and varying size of text.
Thanks!
Great job! Thank you for this release I'm impressed how good and fast the ROM is. It's so nice to taste a functional 4.2 at last. Camera preview gets normal after you take a picture. No ffc though.
Re: [ROM][Feb-9-2013[4.2.1] AOKP JB-MR1 Build 2 [Alpha]
Truly, great job on a really smooth ROM. I wiped clean fully and just installed gapps. Everything seems to work great except camera (back and front) for me. It actually is sideways preview, will take a few pictures and then it dies. Happy to see the stock swipe keyboard. Been having to flash that for a while now. As stated no backlight on hard keyboard for those who love it. Phone calls and mms worked fine for me. Loving the lockscreen and beautiful way toggles are integrated and always available. I can upload a logcat if it helps for the camera.
Sent from my MyTouch Slide 4G using xda app-developers app
Re: [ROM][Feb-9-2013[4.2.1] AOKP JB-MR1 Build 2 [Alpha]
Yeah camera is a no go here too
Sent from my MyTouch Slide 4G using xda premium
bit1 said:
Truly, great job on a really smooth ROM. I wiped clean fully and just installed gapps. Everything seems to work great except camera (back and front) for me. It actually is sideways preview, will take a few pictures and then it dies. Happy to see the stock swipe keyboard. Been having to flash that for a while now. As stated no backlight on hard keyboard for those who love it. Phone calls and mms worked fine for me. Loving the lockscreen and beautiful way toggles are integrated and always available. I can upload a logcat if it helps for the camera.
Sent from my MyTouch Slide 4G using xda app-developers app
Click to expand...
Click to collapse
Honestly Ive been looking at the camera problem for like a week now.... Before I got proper oriented video but then when the program closed it would just stay gray until rebooted. I posted this with hopes that some actual smart person or someone who has seen the problem before.... shows up and says "HEY IVE SEEN THAT BEFORE, this is how its fixed."
But dont worry I am still looking at it... just need to get a proper working build again... AOKP is now behaving like my CM builds... layout rendering hella slow, if at all, artifacts, no boot animation. I'm hoping that I can find what causes it :/
Re: [ROM][Feb-9-2013[4.2.1] AOKP JB-MR1 Build 2 [Alpha]
I have JB 4.1.2 with 4.2 features as of now. But I really hope this rom is fast and good
Sent from my myTouch_4G_Slide using xda premium
Re: [ROM][Feb-9-2013[4.2.1] AOKP JB-MR1 Build 2 [Alpha]
I don't know for sure but you could probably ask around the pyramid forums, Its basicly the same phone internally.
Sent from my MyTouch Slide 4G using xda premium
---------- Post added at 03:08 PM ---------- Previous post was at 02:16 PM ----------
Side note no headphone out
Sent from my MyTouch Slide 4G using xda premium
This ROM is a huge performance boost comparing to CM10. No random slowdowns. I will put together all the bugs I have found if that will help: no FFC (back camera works with scvergarhen's kernel), no headphone jack sound, clock app fcs but that might be due to no data wipe flash. And it still reboots sometimes while toggling wifi. This ROM is so great that I haven't decided yet if want to come back to CM10 because I need headphone sound and ffc would be cool for Skype. This is my night time ROM for now lol.
Re: [ROM][Feb-9-2013[4.2.1] AOKP JB-MR1 Build 2 [Alpha]
So no one has experienced glitchy rotation or glitchy google search results?
Sent from my myTouch_4G_Slide using xda app-developers app
Hm. I didn't but I did have trouble using stock browser. Though I typically use Dolphin so it was an error that I even used the stock. Anyways, here's my logcat if it helps. Sorry had to rar them but they exceeded text size limit. Thanks again OP
ronbon said:
So no one has experienced glitchy rotation or glitchy google search results?
Sent from my myTouch_4G_Slide using xda app-developers app
Click to expand...
Click to collapse
SilverL said:
Honestly Ive been looking at the camera problem for like a week now.... Before I got proper oriented video but then when the program closed it would just stay gray until rebooted. I posted this with hopes that some actual smart person or someone who has seen the problem before.... shows up and says "HEY IVE SEEN THAT BEFORE, this is how its fixed."
But dont worry I am still looking at it... just need to get a proper working build again... AOKP is now behaving like my CM builds... layout rendering hella slow, if at all, artifacts, no boot animation. I'm hoping that I can find what causes it :/
Click to expand...
Click to collapse
You might want to hit up the Team SWaRM guys. They've been fixing bugs like this forever for this neverending phone. I'd say they'd be the first step in best helping you figure out what changes may be needed for camera, etc. Anyways, thanks again OP. Great job on this. Smooth and fast just like someone said earlier
bit1 said:
You might want to hit up the Team SWaRM guys. They've been fixing bugs like this forever for this neverending phone. I'd say they'd be the first step in best helping you figure out what changes may be needed for camera, etc. Anyways, thanks again OP. Great job on this. Smooth and fast just like someone said earlier
Click to expand...
Click to collapse
I already see the keyboard light fix.
Will look at the camera in time too...
Just a little pissed that I'm getting an extremely glitchy build since I posted...
Re: [ROM][Feb-9-2013[4.2.1] AOKP JB-MR1 Build 2 [Alpha]
For me dolphin is no better. Both are glitchy
Sent from my MyTouch Slide 4G using Tapatalk 2
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Oh, you'll love this.. So what actually is different in this kernel?
Core
Updated to 2.6.39.1
Brain F*ck Scheduler implemented for fast task switching, smooth scrolling and possible power saving
Code cleaned and optimized in the right places
Updated Android Binder, Ashmem and Timed GPIO drivers from 3.10-rc5 upstream sources
Compressed with the fastest compressor on the market: LZ4
Processor
Updated CPUFREQ drivers
Voltage Control (undervolted by default to a range of stable values)
Aggressive Overclock
PLL2 Overclock possible inside the app
Updated all the governors to their latest versions
Zen Governor written exclusively for our SoC
Zen
Borrows part of its scaling logic from SmartassV2
Adds Zen Dynamics
This feature makes the governor's parameters completely dynamic. The parameters change by themselves based on various system information (cpu load, suspended state etc.) This ensures that the governor will not bump to high frequencies when it is not needed, and that it will provide enough computational power in high workload cases.
Performance Bias parameter
This is a simple number between 0 and 15 and the only tunable parameter of the Zen governor. When this is changed every other parameter is recalculated through different formulas based on this value. A higher value will make your phone snappier, at the cost of some battery life and viceversa.
TouchPulse and SweepPulse interfaces
TouchPulse is the updated and much more accurate version of the older BoostPulse. This works by giving a slight boost on user input (key or touch).
SweepPulse shoots the CPU frequency to the maximum value when a Sweep function is activated to ensure best responsivity. Don't worry, this happens very fast, so no battery life is wasted in the process.
Suspend profile
When the screen is turned off, the governor keeps the power usage at minimum by re-tuning its parameters
Memory
LowMemoryKiller updated from 3.10-rc5 upstream sources
LMK Whitelist
This is a list of apps which will never be killed by the system, unless you do it intentionally.
I didn't have time to implement a better way for adding apps to this list, so I'll explain the primitive and only usable way right now.
In /system/etc/Badass you will find a file called whitelist. This file can only contain apps in java class path form, separated by commas. Like this:
com.touchtype.swiftkey, org.adw.launcher, com.whatever.app
All the apps that you add to this list, will be written to the LowMemoryKiller at every boot.
LMK Aggressivity: this parameter makes app-killing more or less aggressive. It can be controlled inside the app.
Latest ZRam driver with LZ4 compression (activated at boot so you won't have to bother)
Sweep functions
When the screen is off...
Sweep2Wake
This gesture wakes the phone by sliding your finger from left to right in the middle of the screen
Its sensitivity is controlled by a single parameter (factor) which can be modified inside the app
DoubleTap2[Wake/Play/Pause]
This gesture wakes the phone with a double tap on the screen if the lock timeout of 5 seconds hasn't passed yet. If the timeout has passed, double tapping the screen will Play/Pause the music.
The Media Control feature (Play/Pause) can be disabled, making DoubleTap2Wake work even after the lock timeout has passed.
Pocket Keyguard
This feature prevents accidental unlocks when the phone is inside your pocket.
When the screen is on...
Sweep2Lock
SweepKeys
All these functions work by swiping up from the first 3 pixels at the bottom of the screen(deadzone).
The Deadzone and the Sweep sensitivity are changeable in the app.
*Sweep4Menu is only available for Galaxy Mini
Internet
Westwood+ TCP Congestions Algorithm
Adaptive RED net scheduler backported from 3.4 upstream sources
Congestion window values tweaked
TCP Proportional Rate Reduction
Performance
Zen and ROW I/O schedulers
Triple Buffering
TinyRCU
Dynamic Filesync
Using the 20-50x faster frandom generator instead of the default random.
Never depleting entropy using Haveged and some new kernel code.
Dynamically changing kernel values based on suspend profiles (writeback ratios, cache pressure etc)
System cleaning every 3 days:
Zipalign every apk
Vacuum and Reindex every SQLite database
Clean the garbage data created by the system
Clean app caches
SpeedMod (disable kernel debugging)
Remove 98% of the active debugging code
USB Fast Charge
Native Multitask Enhancer
Replace services.jar Supercharging with a more native approach
Make Home app unkillable
Raise PreviousApp priority to make task switching faster
Handle CPU time allowed for the foreground app
Raise priority of the following processes
Kernel Threads
ALSA driver (audio playback)
Keyboard
SystemUI
Restrict resources used by the media scanner
Dev's last words (a.k.a. read this carefully before saying anything stupid)
This is a stable version and I call it final. I won't update it, unless there are some major bugs like setting phones on fire, giving them artificial intelligence or sh*t like that.
DON'T USE ANY OTHER TWEAK ON THIS KERNEL. These tweaks include, but are not limited to:
Performance Pack
Fly-On Mod
CrossBreeder
I/O Tweaks
V6 Supercharger
Whatever else with a cool name which has the words script, pack or mod in it
Don't get me wrong, these mods are good (most of them), but what's good is already included in the kernel itself
Use Greenify. It is an awesome app, and it does its job very well. I couldn't fully replicate its' features inside the kernel because I don't have access to Android APIs.
The first boot will be slow, due to the zipaligning and SQLite optimizing. Don't freakin' panic. This will happen only once in three days.
If you feel that the system is slow with the kernel, raise the Performance Bias, the LMK Aggressivity and maybe your max CPU frequency. The default values are optimized for ICS, not JB. Play with those values until you find that sweet spot.
Change your damn Superuser app. Use SuperSU or an insecure SU binary. The original SU binaries found on ROMs are freakin' slow nowadays.
Even better, use ICS. JellyBean is not for our low-end phones. But, your choice..
The key settings for the SweepKeys are ROM dependant. For example Recents SweepKey might not work on some JB ROMs. I can't do anything to fix this.
Don't be lazy. I'm here to help, but please show me that you've made some effort on the research for your questions.
And the thanks go to..
Androidarmv6 Team
Erikcas
psyke
A_U
Franco
Boype
Benee
AOKP Team
Paul Reioux (Faux)
Stratosk
zeppelinrox
Ezekeel
Downloads
Badass.v2(AOKB-JB).zip - 6.67 MB
Badass.v2(AOKP-ICS).zip - 6.67 MB
Badass.v2(AOSP-ICS).zip - 8.91 MB
Badass.v2(CM9.2).zip - 6.65 MB
Badass.v2(CM10.1).zip - 6.67 MB
Badass.v2(CM10).zip - 8.91 MB (UMS not working)
Installation
Boot into recovery
Wipe data
Re-flash your current ROM to avoid conflicts
Flash the appropriate kernel zip
Reboot and wait 5-10 minutes for the first boot to complete
Use the integrated app to control the kernel
Source:
Badass-BFS
Reserved
This is just for custom ROM?
ZmisiS said:
This is just for custom ROM?
Click to expand...
Click to collapse
um yes considering its for android 4.0 and above (not yet for android 4.3).
the ROM name for each kernel is labeled in the link(bottom of the first post).
Does it increase camera and gallery performance in cm10.1? Bcoz the camera and the wait time to the picture be loadeed in gallery was so laggy. Btw thanks, great job.
wow! thanks for your hard work o this project
i installed V2 on my miuiV4 and it's really smooth . multitasking is really better than previous version.
first i thought that sweep2things are buggy but after a day of working , i'm now comfortable with it.
- in word of performance it's perfect. thanks
- deep sleep works fine. :victory:
- i got some FC in controll app. first time that phone booted before i grant su permission i got so many FCs continuously!!
- sweep2wake sometimes doesn't work. after i puted and picked up my hand on proximity sensor , sweep2wake worked
- i'm not sure about this but it seems sometimes in sunlight prox sensor doesn't work at all (for sweep2wake function)
and thanks again !
ehsan-black said:
wow! thanks for your hard work o this project
i installed V2 on my miuiV4 and it's really smooth . multitasking is really better than previous version.
first i thought that sweep2things are buggy but after a day of working , i'm now comfortable with it.
- in word of performance it's perfect. thanks
- deep sleep works fine. :victory:
- i got some FC in controll app. first time that phone booted before i grant su permission i got so many FCs continuously!!
- sweep2wake sometimes doesn't work. after i puted and picked up my hand on proximity sensor , sweep2wake worked
- i'm not sure about this but it seems sometimes in sunlight prox sensor doesn't work at all (for sweep2wake function)
and thanks again !
Click to expand...
Click to collapse
Thanks for the review.
Yes, in bright sunlight the infrared sensor can be saturated and take wrong readings. I can't fix this unfortunately.
As I said in the Mini forums, I found a small flaw in the Sweep code and I will release a fix as soon as I get my laptop. This should make a better user experience with the Sweep functions.
First of all, thanks for your work
My review of Badassv2 in AOSP-ICS 4.0.4:
:good:
- The BadassControl app sometimes get FC but nothing to get relevance
- General performance are so good, i've never see my apps open so fast
:crying:
- After 30 minutes, when i open an app, it freezes and I'm obliged to remove the battery and turn on the device :/
-After the third reboot, the phone stays in bootloop and it never boot normally
So sad of this, because I love so much its performance... Anyway, thanks again
Well i tried on CM9 and CM10.1. Performance wise, its so good on CM9 but on CM10.1, it just lags many times (while opening any of apps and opening app drawer itself). I tried all the governors, OC and changed badass settings still lags appear. Previous version 1.9.2 is much better. So no matter how stable the kernel may be, we can't get much performce in CM10.1 right?
And for sweep functions, only doubletap2wake functions for the first time while booting and the screen lock disappears for first time. Even tried to cover proximity sensor but both s2w and dt2w wont work for me.
And sweep2lock also doesn't seem to work for me or am i doing it incorrectly?
If anyone observe CM10.1 to be more stable with no lags using this kernel, will u please share what governors and settings did u use?
swat4samp said:
Well i tried on CM9 and CM10.1. Performance wise, its so good on CM9 but on CM10.1, it just lags many times (while opening any of apps and opening app drawer itself). I tried all the governors, OC and changed badass settings still lags appear. Previous version 1.9.2 is much better. So no matter how stable the kernel may be, we can't get much performce in CM10.1 right?
And for sweep functions, only doubletap2wake functions for the first time while booting and the screen lock disappears for first time. Even tried to cover proximity sensor but both s2w and dt2w wont work for me.
And sweep2lock also doesn't seem to work for me or am i doing it incorrectly?
If anyone observe CM10.1 to be more stable with no lags using this kernel, will u please share what governors and settings did u use?
Click to expand...
Click to collapse
Well I tried on CM10.1, works smoothly for me, I used Zen as well as On Demand governors & zen I/O Scheduler..
Also sweep functions did not work fr me aswell (Tried alot of things bt couldn't get it to work)
Otherwise the kernel is amazing, snappier than the default kernel..
b_dev said:
Well I tried on CM10.1, works smoothly for me, I used Zen as well as On Demand governors & zen I/O Scheduler..
Also sweep functions did not work fr me aswell (Tried alot of things bt couldn't get it to work)
Otherwise the kernel is amazing, snappier than the default kernel..
Click to expand...
Click to collapse
Do u use default settings or tweaked a bit? Did u do a clean install?
swat4samp said:
Do u use default settings or tweaked a bit? Did u do a clean install?
Click to expand...
Click to collapse
I tested CM10.1 and I admit it is not smooth. But it's because I used ICS before and the difference is so much more noticeable. When Sweep functions don't work, it's because the app doesn't work as expected. If you delete the app, everything will work. I don't use Jelly Bean so I can't guarantee anything for it.
Sent from my GT-S5570 using XDA Premium 4 mobile app
alin.p said:
I tested CM10.1 and I admit it is not smooth. But it's because I used ICS before and the difference is so much more noticeable. When Sweep functions don't work, it's because the app doesn't work as expected. If you delete the app, everything will work. I don't use Jelly Bean so I can't guarantee anything for it.
Sent from my GT-S5570 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
True with CM10.1 but ur previous version 1.9.2 gives good results if we OC to 652mhz. Although CM9 kernel is stable and has best performance n multitasking along with battery life. Maybe i have to live with CM10.1 version. Will u make one for CM10.2 please? A basic version without sweep functions and less governors and shedulers maybe.
swat4samp said:
True with CM10.1 but ur previous version 1.9.2 gives good results if we OC to 652mhz. Although CM9 kernel is stable and has best performance n multitasking along with battery life. Maybe i have to live with CM10.1 version. Will u make one for CM10.2 please? A basic version without sweep functions and less governors and shedulers maybe.
Click to expand...
Click to collapse
Sorry but I can't revert all that stuff to make a basic version. It's not as easy as it sounds. I'll work on a CM10.2 kernel if there is any hope to get a fully working version of the ROM. Otherwise, I'll just make it bootable.
Sent from my GT-S5570 using XDA Premium 4 mobile app
alin.p said:
Sorry but I can't revert all that stuff to make a basic version. It's not as easy as it sounds. I'll work on a CM10.2 kernel if there is any hope to get a fully working version of the ROM. Otherwise, I'll just make it bootable.
Sent from my GT-S5570 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I know its too difficult to make one. But as CM10.2 development is going faster and its faster in performance compared to CM10.1. So maybe u can take a look once and decide for yourself .
alin.p said:
I tested CM10.1 and I admit it is not smooth. But it's because I used ICS before and the difference is so much more noticeable. When Sweep functions don't work, it's because the app doesn't work as expected. If you delete the app, everything will work. I don't use Jelly Bean so I can't guarantee anything for it.
Sent from my GT-S5570 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Hey alin, regarding my review.. do you suggest to delete your app?
galfit said:
Hey alin, regarding my review.. do you suggest to delete your app?
Click to expand...
Click to collapse
I suggest changing your su binary. If you don't want to do this then you can delete it.
Sent from my GT-S5570 using XDA Premium 4 mobile app
alin.p said:
I suggest changing your su binary. If you don't want to do this then you can delete it.
Sent from my GT-S5570 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
I'm using SuperSU 1.65... Isn't it good?
galfit said:
I'm using SuperSU 1.65... Isn't it good?
Click to expand...
Click to collapse
It is good but you must set it to always grant permission, not ask for it.
Sent from my GT-S5570 using XDA Premium 4 mobile app
alin.p said:
It is good but you must set it to always grant permission, not ask for it.
Sent from my GT-S5570 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Done! And it works :victory: Thanks
This is for VZW and Sprint GPE and Sense ROMs only.
Features:
-Cpu-boost driver enabled
-Intelli-plug
-Intelli-thermal
-Intelli-active
-Intelli-demand
-Intelli-minmax
-Optimax Gov
-Cpu-frequency limiter driver
-Faux Sound Control
-Ex-fat support
-NLS/CIFS Support
-Graphics boost
-LZ4/Linaro 4.9.3
-Fsync Control
-Added SIO scheduler
-Added FIOPS scheduler
-Fastcharge with thermal control
-Kcal color/gamma control
-Customizable wake gestures
-Sweep 2 sleep
-OC to 2.4ghz
-Max screen off freq
-GPU simple gpu governor
-Simple GPU algorithm
-Entropy Tweaks
-Write Protection disabled
-Frandom
-Optimized crypto algorithms
-Voltage Control
-High Performance Audio
-Zcache Improvements
-MSM Turbo Boost
-Advanced TCP Congestion Control
All Variants:
Download Lollipop GPE: Here
Download Lollipop Sense: Here
Source
Additional Tweaks:
PVS Voltage tweaks:
-First thing you will need to do is figure out your PVS number. You can find this by using a root browser and go to /sys/module/clock_krait_8974/parameters/table_name
or /sys/module/clock_krait_8974/parameters/pvs_number.
-In the chart linked below, find your PVS number at the top and plug in the voltages for your PVS number. For best battery results, keep going up the list until your phone becomes unstable then go back down one and this will give you the best battery performance
*Additional Note: Because I have used the configuration from the s5 for the frequencies, follow the chart for the s5 voltages, NOT the m8
Chart Link: Dropbox - PVS research.xls
Twitter: @buckmarble
Donate: PAYPAL
XDA:DevDB Information
Elite M8 Kernels, Kernel for the HTC One (M8)
Contributors
buckmarble
Source Code: https://github.com/Buckmarble/Elite_M8
Kernel Special Features:
Version Information
Status: Beta
Created 2015-01-26
Last Updated 2015-04-27
Mine
Not all features have made it back into the Sense Lollipop Kernel yet. But all the ones listed are in the GPE kernel.
First!
Good job Buck
Second! Looks awesome
Looks interesting! Thanks for sharing your work ?
Awesome! Working good on ARHD, so far no issues with stock video player(which happens w/other kernels).
Thank you!
I did another quick build yesterday. I wiped out some depreciated hot plug code that has a tendency to mess with the user set max and min some times. I just updated the link in the OP
yeaaaaaa buddy!
Great work as usual!!
ROM is now even smoother!
like budduhh
INteresting. Thank you for the effort.
Tried changing some things with Trickster and applying them locks up and reboots my phone.
MoNsTeReNeRgY22 said:
Tried changing some things with Trickster and applying them locks up and reboots my phone.
Click to expand...
Click to collapse
Trickster seems to have issues with lollipop
No problems here using FauxClock
Thanks Buck! Flashed today and so far no issues. I had no problems using Trickster to adjust settings. The only time I had reboots using either Trickster or Faux is on the stock kernel.
Running smoothly on Sprint ?
Anyone try this on GSM?
Brandon.rush1 said:
Anyone try this on GSM?
Click to expand...
Click to collapse
It should. Give it a try. Let me know.
MoNsTeReNeRgY22 said:
Tried changing some things with Trickster and applying them locks up and reboots my phone.
Click to expand...
Click to collapse
I haven't had anything but issues with trickster on Lollipop. I would recommend using Faux Clock for now.
garywojdan81 said:
Trickster seems to have issues with lollipop
Click to expand...
Click to collapse
buckmarble said:
I haven't had anything but issues with trickster on Lollipop. I would recommend using Faux Clock for now.
Click to expand...
Click to collapse
Weird was running trickster with GPE lollipop just fine, but will give Faux Clock a shot.
Thanks!
MoNsTeReNeRgY22 said:
Weird was running trickster with GPE lollipop just fine, but will give Faux Clock a shot.
Thanks!
Click to expand...
Click to collapse
Also, which rom were you using and what were you trying to change? i will see if i can duplicate it.