Database Info

Seido Surface II

Anybody have this case and wanna tell me a little about it? I wanna order one. Pics would be awesome to.
http://www.seidioonline.com/product-p/csr3hnx1-bk.htm

SystmDcln said:
Anybody have this case and wanna tell me a little about it? I wanna order one. Pics would be awesome to.
http://www.seidioonline.com/product-p/csr3hnx1-bk.htm
Click to expand...
Click to collapse
I have it and I like it.
Pros:
Thick enough to provide reasonable impact resistance without adding so much bulk you want a trailer for it
It has a felt/microfiber lining that makes contact with the phone, reducing wear on phone surfaces
It removes easily for docking, battery changes and the like
It's not horrid looking
Cons:
Doesn't cover the area below the screen around the trackball
It doesn't look great compared to an uncovered Nexus One
Pricey
I can't improve on this pic:
http://assets2.smartphoneexperts.com/images/product_images/accessories/additional_images/6392/large/2.jpg

I like it! Just got it in last night to replace my Case-Mate Tough Case. The Tough Case was solidly built and looked like it would probably take some serious tumbles. However the rubber trim around the screen and buttons picked up pocket lint like mad. Fortunately Case-Mate has a 100% refund on returns policy. If you don't keep your phone in a pants pocket all day and don't mind a bulkier case the Case-Mate is the way to go.
That being said, the Innocase will probably protect against most of the accidental drops you'll encounter. Previously I had an iPhone 3GS and a 2G since launch and in both cases I used the Agent18 Eco Shield slider case which is a very similar design. I'm sure that over the years I've managed to slide both of those phones over 100ft on concrete and tile without damage after fumbling them.
Try Amazon, esp. the partner retailers. I got mine for $25 shipped.

The Innocase II is a very nice case, the rubbery kind of exterior feels really great in your hands and doesn't pick up lint on the exterior. It should be able to provide reasonably good protection against drops, though I haven't had any experience with dropping my Nexus yet.
The only downsides to this case are:
1. Does not work well with all screen protectors because it fits extremely well. Read that it can't fit on top of Martin Fields screen protectors due to this, but I haven't tried it myself.
2. Picks up lint between the case and the phone. The felt lining to protect the back of the case which protects the phone when you slide it in and out of the case creates a space where the lint gathers.

Getting a new case: Slim, fit in pocket.

I've been using the CM Tough for a while now. While it's a great case for protection (very reassuring), its very bulky, and the silicone inner traps all sorts of dust and hair from the inside of my pockets.
For the past month or so, I've been walking around with my phone in my hand, fearing the attack of the lint, and wiping the lint and dust off the silicone whenever I could.
I've decided that if my friends can have sexy, slim cases for the iPhone, allowing it to come easily in and out of the pocket, there's no reason I shouldn't do the same.
Protection, for me, isn't that much of a problem. The easiest way to protect your phone is to basically not drop it, and in the half year I've had my phone, I've never dropped it once.
SO, I've been looking at...
The Momax iCase Pro: TPU sides and plastic back, slim.
SGP Slider: Hard case with cutouts for the volume/power. Looks rather slim.
Not a big fan of cases that don't cover the bezel. I honestly don't get the point, no scratch protection for bezel, and I can't put my phone face-down.
Are there any more cases I should be aware of? Are there people who can give a mini-review for the cases I mentioned above?
Thanks!

Have a look at this, just picked one up yesterday
http://www.case-mate.com/Samsung-Ga...axy-S-T-Mobile-Vibrant-Barely-There-Cases.asp
Fits perfectly on my European GT I9000, feels much nicer than bare phone or hard silicon case I previously used, and it's as easy to get out of your pocket as the bare phone. The only issue you might have is with the bezel, as it doesn't really cover it, rather it leaves the psuedo chrome visible, and only adds at most 0.5mm clearance if you place the phone face down.
Personally, I'm very happy with it. The phone is grippier, the volume and power buttons are much easier to use, and it looks good.
Headphone jack access is better too.
Read the reviews on the link.
Here's another I had a look at recently, seems to give great protection, but it's fiddly to get on and off if you need to do a battery pull, and I didn't like the squidgy button covers, but it might be more in the line of what you're after.
http://www.otterbox.com/Samsung-Galaxy-S-Commuter-Series-Case/SAM4-GALXS-20-E4OTR_A,default,pd.html

I also use the Case Mate Barely There and it is the best I have tried so far.
It doesn't collect dust and the phone slides into the pockets.

I prefer the Momax. My workmate has the barely there, which is slightly slimmer but at the expense of losing some protection. The momax is the best option if you want slim but can still feel comfortable that your phone is safe imo.
I also had the toughcase and became frustrated with it for the same reasons as you. I'm very happy with the momax. Only issue is the power button is a bit harder to push now but a small price to pay.
Sent from my GT-I9000 using XDA App

Using the SGP Ultra slider, totally in love with it as i prefer to have direct access to hardware buttons

I have the Momax case and I have to say, it's pretty good.
http://forum.xda-developers.com/showthread.php?t=790318 - PhoenixFX has provided a review here.
Things i like:
It has a hybrid design, the back is not fully rigid but feels solid, soft sides.
Sides are flexible enough so that it goes on easy but stays in, also like how TPU doesn't become stretchy like silicone .
Lip that protects the screen, didn't notice too much dust getting in.
It's easy to keep a good grip on it.
Dislikes:
As the one posters above me said, the power button is harder to press. the same kind of applies for the volume keys but nor as much. It might be annoying in the long run.
Other than that the case is perfectly fine although I don't really know if it can be classified as slim by my standards , the back plate part is around 1.5mm thick. The back is a matte finish that doesn't offer too much grip but the sides are very grippy.
Hope this helps (I haven't tried any of the other cases so I can't really compare).

i think, case mate barely there is really good for slim profile somehow. and also capdase soft jacket xpose 2 also looks okay.

Check out carrymobiles, melko cases as well

I use the same Case-Mate Barely There case as DMD9, and I don't see myself changing it anytime soon. Very sleek, provides a little bit of a rubbery feel but not enough to make it difficult to slide out of pockets

After protecting my SGS like a baby for the last 11 or so months, it has suffered some damage here and there (home button doesn't work very well, scratches etc).
Thus I decided to ditch the case and go totally slimline with a replacement battery cover (the stock one is a fingerprint magnet, and I have kinda sweaty hands!). Ordered a silver one from focal price (the ones with the samsung logo, but clearly fake) and its a pretty good fit.
I totally recommend going caseless, it fits so well in the pocket when you go out!

I also support caseless usage,
I had a invisibleshield protector on the phone for a few months and that one worked well but it came off.
Now i still use the phone as if there was a protector on it and....not a scratch added.
the screen can really handle some abuse

Anyone seen this case?

Doesnt look too bad for the price. Kinda reminds me of the Commuter.
http://cgi.ebay.com/BLACK-IMPACT-PH...ccessories&hash=item3a663f1f8f#ht_1688wt_1139

Looks ugly tbh...
Sent from my Desire HD using XDA App

That's way thicker than commuter case
sent from my inspire 4G

Hmm.. I don't think I really like that one.
I'm quite happy with the case/holster I picked up:http://www.amazon.com/Seidio-SURFACE-Holster-Inspire-Desire/dp/B004O0TGSE/ref=sr_1_9?ie=UTF8&qid=1307369845&sr=8-9

Yes, it is either the Otterbox or a knock-off of it. I have the Otterbox Inspire 4G w/clip and I love it. I did my homework on cases for this phone and was impressed by all the rave reviews for the Otterbox. When it arrived I was in for a shock. But after the first day of getting used to it I was definitely impressed. Yes it is a little bulky and increases the total weight of the phone. But it is extremely effective at protecting your investment from drops, dings, scratches, etc... and very comfortable in your hand. Instead of a protective screen that needs to be peeled off and applied it comes with a front and back shell that the phone rests inside of and they snap together around the phone. Then the rubber covering fits like a glove around the shell. At first glance I thought there was no way this firm plastic face plate would be contact sensitive enough, as far as pinch & press or typing text, but it never fails to be responsive to the slightest touch. Amazing concept. I've had it for 7 weeks now and my phone looks as new as the day I bought it. I’ve used wireless Bluetooth for years (Sony Ericsson HBH-DS980) to talk on the phone all the time, or listen to music throughout the day. I almost never have the phone up to my ear, so the weight or bulk of a phone has never been an issue for me. You can get it with or without the belt clip attachment. I’ve been in the habit for years of wearing my phone hanging off of my pants pocket or my belt. So I opted for the clip version. The phone snaps into the clip securely either face-inward or face-out. It has never fallen out of the clip. I wear mine face-in to prevent scratches in case I bump up against my desk or something. Rarely do I ever need to strip the phone naked, even when I am at home. I paid $33 for mine, but could have gotten it for less had I more time to comparison shop before the phone was to arrive. But if the item you are looking at doesn't say Otterbox I can't say what you might get. Hope this helps, and good luck with whatever you decide to use.

Revolution case by Poetic Review

Poetic offered me to review their case, and they sent me one completely free. I want to thank them first for this kind offer.
To begin with design;
Quality of material is really good.
It looks great :good:. Compared to the other armor cases i saw, Revolution has a cool and better looking design for sure. It does not make your phone like old army satellite phones like others.
Cuts are precisely aligned. It has cuts for both mics on top and bottom.
The stand on the back offers great functionality , also adds a good-looking detail to back side.
It offers a better grip on the phone.
Field of profession: Protection
Nothing much to say really. For sure one of the best. Case feels really solid.
Also has dust protection caps on usb and headphone ports. It really gives you confidence about drop protection. I feel like a dont need do worry about dust or dropping my phone anymore.
Cons:
As a natural downside of this high protection, phone feels a little bit bigger and thicker.
I think it is hard to put the phone to the case and back off(Maybe there is an easier way than I did). But if you need this kind of protection I guess you dont need to do it often.
To conclude:
It is one of the best cases offering that much protection also with an elegant design. Feels solid and durable, no worries about dropping. If you need that much protection, I would definately recommend that.
As a results I give this product 9/10.
Link of the product: http://www.amazon.com/Revolution-Protective-Landscape-Absorption-Resistant/dp/B013A1JEI4/ref=sr_1_1?srs=10167778011&ie=UTF8&qid=1449783452&sr=8-1&keywords=s6+edge+plus+revolution

Very nice and interesting! Good work!

DBase2 said:
Very nice and interesting! Good work!
Click to expand...
Click to collapse
Glad you liked it

I'm pretty sure this is the ugliest design possible. Wouldn't put it on my phone if they paid me.

It seems too big to be good for daily use
Sent from my HTC D820us using Tapatalk

Protection vs Convenience!
I got one too for the review! Here's my list of pros & cons:-
Pros:-
- Protection
When they say protective case, I didn't realize they literally meant every letter of it! This shell is so damn hard, I can beat the **** out of a mugger if it ever comes to that. I'm pretty sure even if I drop the phone on the ground from the first floor, nothing will happen to the phone unless the screen hits directly on some elevated object. So I'll give it a thumbs up on protection category. The case is damn solid! The brand also claims that the case is shock resistant, although I didn't get a chance to test it out myself (or may be I don't want to find that out). The case also covers the volume rocker and the power button with its own tactile buttons.
- Dust Resistant
Putting the case on is quite a challenge, however once done, it doesn't leave much space in-between the case and the phone itself. The USB Port and the 3.5mm Audio Jack has a dedicated pull-up flaps which are easy to open and close. So, overall, it has some dust protection too.
- Excellent Grip
The case is built with some reinforced TPU (or similar material) with texture on the sides which provides excellent gripping to the holding hand. Even if you drop it, doesn't look like it's gonna make any difference anyway!
- Built-in Kickstand
Not just the case, even the built in kickstand is made of metal and it definitely feels solid unlike some lousy kickstands which come with many other cheap cases. So you have the power kick it out and enjoy movies/videos (or games if you use a gamepad) anywhere you want.
Cons:-
- Size
Huge! That's what it is. Edge+ is already hard for some to handle it with one hand but putting this cover on, it becomes almost impossible for them to operate with one hand. It widens the phone by atleast 1.5-2 cms.
- Weight
With power comes responsibility. Similarly, with protection comes additional bulkiness! At 90 grams (3.2 ounce) this is the heaviest case I've ever used. At 153 grams ( 5.4 ounce), Samsung Galaxy S6 Edge+ is one of the slimmest and lightest phablets in the market and this case would put that to complete shame!
- Case On/Off
With my Gear VR, I need to take off my phone's case every now and then! With this case, that's not happening. It took me almost 15 minutes (first time and the only time) to put this case on. Trust me, it's damn hard to pull out the frame ( the plastic bumper) from inside the case and putting the phone inside is even harder! Though once done, it's definitely protected! Now, taking off the case is another challenge!
- Buttons
Due to this reinforced TPU material, the buttons on the case are a bit harder than usual. So you might have to use some extra strength when you want to access the power button or volume key, you still get the tactile feedback though!
The Final Verdict
If you work in a harsh environment and your sole purpose of a case is protection of the phone, this case is definitely for you. But if you hands are short or you like keeping your phone in your jeans pocket or you want to show off how cool is that edge display of your phone, this case isn't for you! Check out the HD images for a better view!

First I would like to thank Poetic for sending me a free sample to do a review of it.
I received Poetic Revolution case one week ago and I decided to test it for a while before I write a review.
At the first sight I was astonished by a quality of a case, I have never seen case with more details before. I really like its millitary look. I love how all holes are precisely cut out. They are covered with a dust protectors which is really nice. When you hold your phone in this case you are completely sure iz will not slip out of your hands.
I found metal stand really useful especially when I watch movies, have video conversation with my girlfriend or when I cook lunch and cannot hold my phone.
When It comes to protection I am sure it will prevent my phone of taking damage. My son dropped phone on the floor two times and phone survived just very well without cracking.
Cons:
- It is a little bit too bulky (but it is ok as protection is its main role)
- There should be screen protector intergrated in this case
- Every time I insert charger I am afraid to scratch bottom of my phone.
Overall I am keen on this case because it gives best protection to my phone. I love how nice it looks on my phone.
If you want highest level of protection for you smartphone you shoud definitely give it a try:
http://www.amazon.com/Revolution-Protective-Landscape-Absorption-Resistant/dp/B013A1JEI4

I received the Poetic Revolution case as well about a week ago. I wanted to give it a weeks worth of use before giving a review.
Pros
(1) Very well built. This thing is rock solid and the tolerances are super tight. This keeps out the dust and offers great protection from falls.
(2) Great Design... The overall aesthetics of this case are great. You can tell a lot of detail went into designing this case. It's funny to mention but I found the integrated backplate (blue plate) on the inside of the case to be impressive how it's molded into the rest of the case.
(3) It's awesome that they included a kickstand. I miss the days of old when phones had kickstands built into them, but this is a great alternative option since the newer phones don't have the kickstands anymore.
As far as CONS go.... there really aren't any that I could find. I did have a couple annoyances that I'll list below but these are subjective of my own opinion and shouldn't be viewed as a flaw in the design or a need to change it in any way, just a couple suggestions that would make "myself" like the case even more...
(1) Not a fan of the caribeaner loop... I get why it's there, and could be useful to some, but I feel like I'd just want to get some snips and cut it off... I wear baggy pants and can still fit this big case/phone in my pocket, however that caribeaner loop would catch on my jeans and just constantly annoy me. A minor hindrance, but I'd prefer it without the loop.
(2) I noticed the kickstand would "tap" against the backside of the case. This would be a little annoying were there any vibrations going on. For instance when my phone is in my car dock stand, the vibrations from the car/road would make this rattle ever so slightly. My suggestion, integrate some sort of rubber/silicon surface just under where the kickstand meets the backside of the case.
Final thoughts....
This is a great case that would definitely protect your phone had you dropped it, or are in a harsh environment. The design is eye-catching and worthy of the newer era of smartphone cases. The kickstand feature is a definite plus, and even though I am not a fan of it, I could see how the caribeaner loop would be useful for the outdoorsman or a construction worker.

I received my Revolution case from Poetic over the holidays (thank you guys).
The first thing that I noticed was the build quality!! It's amazing guys. You won't be banging up your phone with this case protecting it!!
All of the cut outs are very precise. The case has dust flaps to cover the charger and ear phones sockets. The case is a two part case that you take the rubber inner out and after fitting the phone into it then you put the outer tougher part on. It does add a little size to the phone but it's going to protect it from and mishaps. After all...protecting a phone that costs more than most gadgets out there is the main thing. I have used it now for a couple of weeks and I must say that when you buy a Poetic Case you're buying the best.
I am a proud owner of two different cases from Poetic and I promise you that one you try you will always buy from them.
I only found one slight hindrance and that's the kickstand. After a day or two it seems have become a little loose and taps and rattles. I just placed a tiny piece of blue tac under it to keep it closed.
Please try these cases from Poetic guys...I really speak highly enough!!!
Sent from my SM-G928F using Tapatalk

I have been using the Poetic Revolution case on my gold Galaxy S6 Edge+ for about a week and a half
now. Here are my thoughts.
When looking for a rugged case, the Poetic Revolution marks off every box, and then some. This is one
of the best, and toughest cases I have ever seen. When not at work, I need a case like this for my phone.
Hiking, camping, car shows, at the lake, my kids and I are always outside. I have 2 young sons, with this
case on, I am not concerned if they grab my phone and throw it around. I have an 85 pound puppy that likes to chew. Thankfully he has never gotten a hold of my phone, but I feel confident this case would protect it.
When receiving this case, I thought it was going to be all black, but it was not. It is black with very dark
brown accents. I personally liked this as it makes the case stand out more, but in a subtle way. I also
think it makes the case look really good with my gold phone. I also really like having the port covers.
While out on the sand rails and quads out in the desert, they keep the dirt out. When you are at home
with your phone on the counter, they can keep them covered long enough for you to save your phone
should something get spilled.
I have seen where some people have said that this case is very difficult to take on and off, however, I
do not feel that way. Is it more difficult than just a thin snap on case? Of course, but I have no concern
that this case is coming off my phone if it gets dropped. I have used cases that go on and off in the same
way in the past, and I prefer them. The way it’s made, it is thinner than an Otterbox type case, but in my
opinion stronger because you don’t have 2 plastic pieces snapping together.
The kickstand on this case is also among the best I've seen. In my experience, most kick stands are
made from a cheap material, or even if they aren’t, they pop out of the case so easily the little nubs that
are used to snap it into place break. Not here, where it is very tactile in extending it to use it, but it will not pop out of the case on you. One other benefit is that I have been able use it both horizontally and vertically.
When it comes to the loop at the top, I could go either way. I would be happy with a case that did not have it, but I think it could also be more useful with some minor improvements. If I am just hiking, I feel confident when hooking it to my backpack. However, when out riding in the desert, I do not feel that it is strong enough to hook on to my keys or someplace similar. If it kept the loop, I would use it more if it were reinforced with a harder material. Either way, I think this was a good idea to separate their case from others.
Though I was pretty sure they would not work, I did test both wireless charging and Android Pay (NFC) with this case on, and neither worked. This was not a big deal for me as I do not use Android Pay much, and I only wirelessly charge at work, where I can just take the phone out of the case if need be.
This case was provided to me by Poetic for my honest opinions. For the price of this case (currently $19.95 on Amazon), it is superior to cases costing twice as much. Though this is my first Poetic case, it will not be my last. I was so impressed with this case that I recently purchased a Poetic case for my Galaxy Tab A after the old case was chewed by above mentioned puppy.

Looking great will definitely try it soon.
Sent from my SM-G928G using Tapatalk

A case that does it all?

Hello Everyone,
New Note 4 user here, (yeah sounds strange upgrading from the note 3 finally, but samsungs gone full potato) and like any other purchase, the hunt for cases is on. I have scoured the internet/ebay/threads for possible solutions to my dilemma and haven't found anything, so I figure its a good time to ask. With my N3 I had the Seidio Dilex Extended battery case with the belt clip holster. This was an amazing combo and accounted for 99% of my needs, minus the stupid negative incline when the phone was flat on its back, due to the kickstand bulge.
Anyways, I am having a hell of a hard time finding extended battery cases that have a kickstand, or have the plastic belt clip holsters for that matter. Essentially it looks like its the Zerolemon and thats it for holster combos, or if I want an integrated kickstand, its the mugen, for outrageous pricing.
I had originally hoped that I'd be able to reuse the same case and such from my n3 with some modifications, since these two phones are very close in size. Well that got quickly abandoned, but there was still the possibility of using the seidio case and cover/holster since they appeared to be the same dimensions. Wrong again.
The sides of the case have much steeper angle coming out from the phone on the bottom and top, but could possibly be adjusted depending on how or if I can rework the holster.
and the top
I have found a temporary starting point to try and reclaim some of the utility I had with my N3 with a few random pieces from amazon.
Anker has been out of stock for a while, unless you want to pay scalper prices on ebay, so I figured I'd give Kranich a whirl for the $25 they asked for 6400mah battery and the plastic textured back panel.
Next I picked up a generic tpu honeycomb case (hopefully this is better than the plastic crap I had on my SIII) for $10 https://www.amazon.com/gp/product/B00S1581X4/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
and lastly found a neat little gadget for another $10, a magnetic kickstand with adhesive. https://www.amazon.com/gp/product/B01HP15P60/ref=oh_aui_detailpage_o00_s01?ie=UTF8&psc=1
My plan should it go well, is to try and either cut a loop in the tpu case and secure the kickstand to the plastic backing itself, or to the tpu on the outside if thats not possible. Either way, ill make sure to correct the confusing mistake seidio made by putting the kickstand on the bottom of the phone and having it lay with the bottom of the phone slightly elevated instead of flat.
This should get me back to at least the core level of performance that the seidio case I had before offered, with a little less protection I think.
The last problem however, is the belt holster (or whatever you want to call it). Again, not many options, so I am looking at modifying my existing seidio holster to fit my N4 or possibly getting an otterbox holster and trying to work with that. You know, interestingly enough, I figured Alibaba would be swarming with weird stuff like that, and I really didn't see anything different
If anyone has any bright ideas, I'd love to hear it. Or for that matter any other cool suggestions for gear.
==============================Update #1==========================================
TPU case came in, god this stuff still sucks, and spigen kcikstand as well. After slipping my note 4 into something more sensual, I decided it was time to try out the holster, which I prayed to the case gods would still fit, and i-it d-d-does! Success! It does in deed definitely fit securely in the mount, albeit a it rides a little higher in the clip due to being ever so slightly longer that the note 3 with the seidio case (works for me still).
Far Away shot.
Damnit, point and shoots are picky when shoplights are involved.
Now that the first test was an overwhelming success, I decided it was time to make some cuts and drop the kickstand in, maybe risk some fingers or violate some safety rules. I decided to cut my way through the TPU case (while half listening to a linus tech tips webisode) and attach the kickstand directly to the phone case for more stability and a slightly smoother surface and a little more professional look. Results below:
First was to figure out where to put the case, I noticed that the first set of honeycombs was almost a perfect border for the ends of the kickstand and those served as an excellent guide for my first cuts.
To achieve a straight cut, i used a square razor blade and tapped it down through the tpu into an old notepad. this have a nice clean straight edge, id soon have to murder since it was nowhere near wide enough for accommodate the whole kickstand. A halfway picture would have been nice, but I was eager to finish.
If you do decide to copy this, make sure you cut the material, almost too tight for the kickstand, so it fits snugly, instead of stretching and leaving a gap like mine did. I would have liked to have rounded my edges a little better, but oh well, its not like I bought the phone to look at the back.
In any case(oh god not the puns), I think it worked out pretty well, but I think I'm gonna try and find a few more TPU cases, maybe that are a little spongier since this hardly gives any protection for drops. An added benefit is the lip of the kickstand in this spot serves as a nice rest for your fingers while using the phone.

I own and use the Thor Champagne Gold version of this one for more than 18 months now: https://www.amazon.com/Galaxy-Note-Verus-Charcoal-Black/dp/B00MHBSHYG
and am very happy with it. Have dropped the Note4 while bicycling, and from other stupid high positions on stone, it has saved my Note4 many a time. These verus cases rock!
So try that brand, I bet you they have what you need.

Switched from Hyperion 8000mah with honeycomb tpu, now using Verus Iron Shield with Spigen kickstand add on and purchased 3 extra batteries with external charger for $23 US from Amazon. I have leather holster, but front pocket works just fine.

jult said:
I own and use the Thor Champagne Gold version of this one for more than 18 months now: https://www.amazon.com/Galaxy-Note-Verus-Charcoal-Black/dp/B00MHBSHYG
and am very happy with it. Have dropped the Note4 while bicycling, and from other stupid high positions on stone, it has saved my Note4 many a time. These verus cases rock!
So try that brand, I bet you they have what you need.
Click to expand...
Click to collapse
That looks and sounds amazing, and reminds me of some of the drops my note 3 has taken and survived. This is what I really, really wanted to reproduce with my note 4, because, well it makes sense. Only problem is, I really want an extended battery since charging is much slower than my n3, and I don't want to rely on batteries.
tbvnz said:
Switched from Hyperion 8000mah with honeycomb tpu, now using Verus Iron Shield with Spigen kickstand add on and purchased 3 extra batteries with external charger for $23 US from Amazon. I have leather holster, but front pocket works just fine.
Click to expand...
Click to collapse
It looks goregeous, but I'm a little concerned about dampening shock, TPU doesn't seem to be the best at it..