[Q] Major Help With ZTE V11a Root - General Questions and Answers

Hey Guys,
So successfully rooted my Smart Tab 10 (ZTE V11a)
Got the customer ROM for it so i can update to ICS
Go through ROM Installer & ROM manager to install the new ROM through CWM-based Recovery v5.5.0.4
But i get this error: (backup goes through fine)
-- Installing: /sdcard/romtoolbox/downloads/goo.im/devs/joestone/cm10/cm-10-20121117-UNOFFICIAL-V11A.zip
Finding Update Package...
Opening Update Package...
E:Can't open /sdcard/romtoolbox/downloads/goo.im/devs/joestone/cm10/cm-10-20121117-UNOFFICIAL-V11A.zip
(No such file or directory)
Installation aborted.
/tmp/recovery.log was copied to /sdcard/clockworkmod/recovery.log. Please open ROM Manager to report the issue
As much help would be appreciated as possible - At my wits end been trying all night and morning

Related

[Q] I need help install cyanogenmod 6

I'm new to rooting and installing custom roms. I used unrevoked 3 to root my ego, then I created an nandroid and wipe my phone. Next, I rebooted the phone to download the free version of ROM manager from the market. I used the ROM manager to download cyanogenmod 6 (stable). After downloading the rom, I did as the screen prompted me and wipe the phone and created a backup. From here the installation process begins and end with
Welcome to Cyanogenmod 6.0.0-supersonic assert failed: getprop ("ro.bootloader")="0.76.2000"//9.000"
E: Error in /sdcard/clockwork/download/mirror.kanged.net/cm/stable/supersonic/update-cm-6.0.0-supersonic-signed.zip
I haven't a clue what to do at this point.
Can someone please help?
"E: Error in /sdcard/clockwork/download/mirror.kanged.net/cm/stable/supersonic/update-cm-6.0.0-supersonic-signed.zip"
Read this link, I think it is about the same problem.
http://www.actuarialoutpost.com/actuarial_discussion_forum/showthread.php?t=195406&page=46
If I still can not post a link cause I am new, then I googled this:
mirror.kanged.net/cm/stable/supersonic/update-cm-6.0.0-supersonic-signed.zip"
I got three hits, read the first one "maybe we need and android tweeking ...."
Also check this out. I am tempted to say you downloaded the link to the actual file that you want and not the file. Here is the link to the actual file.
http://mirror.kanged.net/cm/stable/supersonic/update-cm-6.0.0-Supersonic-signed.zip
Click that link and then you download the file you need.
Ref:
http://androidforums.com/evo-4g-all-things-root/175655-cyanogen6-link.html
hey,
thanks for trying to help. I'm still having the same problem.
No app2sd partition found. Skipping format of /sd-ext. (is this the problem?????)
--Installing: SDCARD: /clockworkmod/download/mirror.kanged.net/cm/stable/supersonic/update-cm-6.0.0-supersonic-signed.zip
Finding update package...
Opening update package...
Installing update...
Welcome to Cyanogenmod-6.0.0-Supersonic!
assert failed: getprop("ro.bootloader") =="0.76.2000"
getprop("ro.bootloader")=="0.79.0000"
E: Error in /sdcard/clockworkmod/download/mirror.kanged.net/cm/stable/supersonic/update-cm-6.0.0-Supersonic-signed.zip
(status 7)
Installation aborted.
/tmp/recovery.log was copied to /sdcard/clockworkmod/recovery.log. Please open ROM Manager to report the issue
PLEASE HELP....

[Q] Please Help! (how to flash cyanogenmod 6-evo)

I'm new to rooting and flashing. I used unrevoked 3.21 to root my evo. Now I'm trying to use ROM manager to flash cyanogenmod 6 stable, but i keep running into the error below. Can someone please help?
No app2sd partition found. Skipping format of /sd-ext. (is this the problem?????)
--Installing: SDCARD: /clockworkmod/download/mirror.kanged.net/cm/stable/supersonic/update-cm-6.0.0-supersonic-signed.zip
Finding update package...
Opening update package...
Installing update...
Welcome to Cyanogenmod-6.0.0-Supersonic!
assert failed: getprop("ro.bootloader") =="0.76.2000"
getprop("ro.bootloader")=="0.79.0000"
E: Error in /sdcard/clockworkmod/download/mirror.kanged.net/cm/stable/supersonic/update-cm-6.0.0-Supersonic-signed.zip
(status 7)
Installation aborted.
/tmp/recovery.log was copied to /sdcard/clockworkmod/recovery.log. Please open ROM Manager to report the issue
PLEASE HELP....
I am in the same boat, I got it to flash 1 time, and I am on nighties, and there is an update found, I download the latest, and try to flash, same error. I see there has been no reply's to your thread, I am looking too, I think it could be because our nand is not fully unlocked, but thats just a theory. if you get anymore info, and want to share, please hit me up at [email protected]
I will bookmark this thread and give any info i uncover as well.

Not able to flash roms

Since this morning I'm not able to flash roms in ClockworkMod Recovery v.3.2.0.0 (solarnz-R4c-100611-1150)
I get this message:
-- Installing: /sdcard/aokp_wingray_build-25.zip
Finding update package...
Opening update package...
E:Can't open /sdcard/aokp_wongray_build-25.zip
(bad)
Installation aborted.
This happens no matter which rom I try to flash. What could be the reason?
slonn said:
Since this morning I'm not able to flash roms in ClockworkMod Recovery v.3.2.0.0 (solarnz-R4c-100611-1150)
I get this message:
-- Installing: /sdcard/aokp_wingray_build-25.zip
Finding update package...
Opening update package...
E:Can't open /sdcard/aokp_wongray_build-25.zip
(bad)
Installation aborted.
This happens no matter which rom I try to flash. What could be the reason?
Click to expand...
Click to collapse
please verify your download by comparing md5 checksums. If you use root explorer, you can long-press the file and click properties, it will calculate that checksum for you. If you don't have an app to create checksums, please put the micro-sd card into your computer and use an application to do so on your computer. Compare that md5-checksum to the one provided by whoever you downloaded that rom from. If it doesn't match -> there's your problem. If it does match, something else is probably wrong.

Error when instaling custom rom

Hi everyone,
I`m tryign to install criskelo rom (http://forum.xda-developers.com/showthread.php?t=1714091) and I followed every step, but when trying to install the rom I get the error bellow:
Installing: /emmc/Criskelo_6.0.1_Stock_XXBLG9_oat.zip
Finding update package....
Opening update package....
E: Can't open /emmc/Criskelo_6.0.1+Stock_XXBLG9_ota.zip
(bad)
Installation aborted
Anyone knows what I did wrong?
Thanks.

[q] trouble from .30 -> jb (rooted and unlocked)

I flashed .26 to.30 fine now when I put the TF700T US_10.4.4.16-20120927 OTA.zip file in SD card then go to recovery I get this.
Finding update package...
Opening bundle update package...
E: can't open /SD card/ASUS bundle.zip
( no such file in directory)
Installing update...
Finding update package...
Opening update package...
E: failed to open /sdcard/ep201_768_sdupdate.zip ( no such file or directory)
E: signiture verification failed
SD installation aborted
I also changed the file name like I read
Know I'm doing something wrong just don't know what
Thnx.
Dr. Greenthumb said:
I flashed .26 to.30 fine now when I put the TF700T US_10.4.4.16-20120927 OTA.zip file in SD card then go to recovery I get this.
Finding update package...
Opening bundle update package...
E: can't open /SD card/ASUS bundle.zip
( no such file in directory)
Installing update...
Finding update package...
Opening update package...
E: failed to open /sdcard/ep201_768_sdupdate.zip ( no such file or directory)
E: signiture verification failed
SD installation aborted
I also changed the file name like I read
Know I'm doing something wrong just don't know what
Thnx.
Click to expand...
Click to collapse
You still have the stock recovery installed. You have to flash that zip with a custom recovery. Install TWRP or CWM and give it another go.
got twrp
urrlyx said:
You still have the stock recovery installed. You have to flash that zip with a custom recovery. Install TWRP or CWM and give it another go.
Click to expand...
Click to collapse
I got twrp installed it just won't go into boot recovery so do you know the manual button combo for twrp?
Can't seem to get into twrp reboot just goes to stock recovery even on manual
Just a thought... when you flash a stock image you will lose root. Even though the Goomanager looks like it is installing the twrp it wont work without root. Check your root status through Titanium or rootkeeper etc. Sometimes the debug method seems to tell you that you have root when none of the programs are getting root access.

Categories

Resources