Hey guys!
These days I've started monitoring my cores on N9005 kitkat firmware (everything stock) and I've found that sometimes cores get stuck online and only a reboot fixes the issue.
EDIT !!! : PROBLEM SOLVED
*THE ISSUE IS CAUSED BY TOUCHWIZZ DVFS(DYNAMIC VOLTAGE AND FREQUENCY SCALING) SO THANK YOU SAMMY FOR THAT !
*THE ONLY WAY TO RESOLVE IT IF YOU ARE NOT ROOTED IS TO REBOOT WHEN YOU SEE THAT YOUR CORES DON'T WANNA GO OFFLINE(CHECK THEM WITH PERMOM OR SYSTEM MONITOR...ETC.)
*ANOTHER WAY IS TO ROOT AND WHEN THE ISSUE HAPPENS YOU CAN FIX IT BY RESETING MP-DECISION OR THE PERMANENT WAY IS TO INSTALL XPOSED FRAMEWORK AND THEN DOWNLOAD(DON'T FORGET TO ENABLE THE MODULE IN XPOSED AFTER YOU DOWNLOAD) FROM PLAYSTORE "SAMSUNG DVFS DISABLER" BY WANAM(JUST SEARCH IN PLAYSTORE THE WORD "DVFS" AND YOU WILL SEE IT - !
*OFC THAT AOSP OR CM BASED ROMS DON'T HAVE THE ISSUE !!!
BIG THANKS TO ALL THE GREAT GUYS ON LEAN KERNEL THREAD FOR CONTRIBUTING TO SOLVING THIS ISSUE
I've rooted and when the issue happens, disabling mp decision and enabling it again fixes the issue so this means that hotplug doesn't play well. Maybe a custom kernel will fix this issue.
I experience the exact same issue, but on completely stock 4.4.2 rom. I posted a thread about it a while back but no one answered it:
http://forum.xda-developers.com/showthread.php?t=2646389
I'm positive this is the reason for people's battery drain on stock roms.. Does the stock rom implement some form of hotplug functionality? It must be bugged somehow.
It still happens, and it has not fixed itself. The only way to fix it for me that I know if is a reboot..
EddieN said:
I experience the exact same issue, but on completely stock 4.4.2 rom. I posted a thread about it a while back but no one answered it:
http://forum.xda-developers.com/showthread.php?t=2646389
I'm positive this is the reason for people's battery drain on stock roms.. Does the stock rom implement some form of hotplug functionality? It must be bugged somehow.
It still happens, and it has not fixed itself. The only way to fix it for me that I know if is a reboot..
Click to expand...
Click to collapse
I've found the issue.See what I've wrote in OP with red text :fingers-crossed:
ciprianruse88 said:
I've found the issue.See what I've wrote in OP with red text :fingers-crossed:
Click to expand...
Click to collapse
Thanks, I figured it would be something along those lines.
However I'm fully stock with no plans to root because of the Knox-debacle.. So I guess I will have to stick to rebooting until Samsung fixes the issue
Sent from my SM-N9005 using Tapatalk
EddieN said:
Thanks, I figured it would be something along those lines.
However I'm fully stock with no plans to root because of the Knox-debacle.. So I guess I will have to stick to rebooting until Samsung fixes the issue
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
I don't think they will fix it because some users said that they have this issue since 4.3 and kitkat didn't fix it
ciprianruse88 said:
I don't think they will fix it because some users said that they have this issue since 4.3 and kitkat didn't fix it
Click to expand...
Click to collapse
Unfortunately this is also something I'm afraid will never get fixed. I noticed similar battery drain on 4.3 but never narrowed it down to cores bugging out until kitkat. Maybe I'll root anyway..
Sent from my SM-N9005 using Tapatalk
On stock nc2 deodexed with dvfs disabled via wanam, my powersaving mode no longer brings the frequency down. Only if i disable the module and reboot.
Sent from my SM-N9005 using Tapatalk
celderic said:
On stock nc2 deodexed with dvfs disabled via wanam, my powersaving mode no longer brings the frequency down. Only if i disable the module and reboot.
Sent from my SM-N9005 using Tapatalk
Click to expand...
Click to collapse
For me works fine but I am on latest Omega Rom
ciprianruse88 said:
For me works fine but I am on latest Omega Rom
Click to expand...
Click to collapse
Hmmmm very strange
Sent from my SM-N9005 using Tapatalk
ciprianruse88 said:
For me works fine but I am on latest Omega Rom
Click to expand...
Click to collapse
Works fine for me as well on xnote. Great find bro..
PS- Btw might wanna edit the title to show that you have found a fix.. :thumbup:
Sent From My SM-N9005 To All You Wonder Nobodies!!
Khizar said:
Works fine for me as well on xnote. Great find bro..
PS- Btw might wanna edit the title to show that you have found a fix.. :thumbup:
Sent From My SM-N9005 To All You Wonder Nobodies!!
Click to expand...
Click to collapse
You are right ! Thanks for the suggestion :highfive:
Dont work for me. I disabled DVFS yesterday in newest version of wanam xposed, rebooted and checked settings in wanam again. DVFS was unchecked, so I think it is/was disabled. But today´s morning, i had 2 core stuck online again, almost the same as the few issues before unchecking DVFS. So I think, it doesnt work for me. Note 3 SM-N9005...
I been trying to off dvfs. What I can see. It will always run high frequency. Phone get warm and using phone while charging took longer than usual.
Because I run games and always on screen plus charging. So turning off dvfs not a good idea.
Sent from my SM-N9005
I've been testing different firmwares with DVFS off since I started this thread and not once I have seen again 4 or 2 cores stuck online and battery is better than ever so for me this was definitely the cause of random 4 cores stuck online. Good luck !
I'll be trying this for a while. But yeah I did notice that power-saving CPU limiting option does not work if DVFS is off. Mine reaches maximum frequency
Strangely, the Wanam Xposed module never did its job for DVFS, though the standalone module does work, and both are from Wanam.
Do not settle for Wanam Xposed, it is a useful utility but not all features seem to work in Note 3. I.E, Volume UP while on Deep Sleep wont trigger the flashlight, even though you activated the feature, yet the standalone module just for that (again, from Wanam) works perfectly.
http://repo.xposed.info/module/ma.wanam.dvfs
ardom said:
I'll be trying this for a while. But yeah I did notice that power-saving CPU limiting option does not work if DVFS is off. Mine reaches maximum frequency
Click to expand...
Click to collapse
For me works fine with every firmware I tested. Maybe you need a clean wipe.
PlutoDelic said:
Strangely, the Wanam Xposed module never did its job for DVFS, though the standalone module does work, and both are from Wanam.
Do not settle for Wanam Xposed, it is a useful utility but not all features seem to work in Note 3. I.E, Volume UP while on Deep Sleep wont trigger the flashlight, even though you activated the feature, yet the standalone module just for that (again, from Wanam) works perfectly.
http://repo.xposed.info/module/ma.wanam.dvfs
Click to expand...
Click to collapse
Yes. I too am using the standalone DVSF mofule from playstore but I remember testing wannam xposed on NB2 firmware and worked fine. I am glad that we found a way to fix this Sammy bug but I am disappointed that they didn't and I don't think they will ever do so this is probably my last Sammy device.
ciprianruse88 said:
Hey guys!
These days I've started monitoring my cores on N9005 kitkat firmware (everything stock) and I've found that sometimes cores get stuck online and only a reboot fixes the issue.
EDIT !!! : PROBLEM SOLVED
*THE ISSUE IS CAUSED BY TOUCHWIZZ DVFS(DYNAMIC VOLTAGE AND FREQUENCY SCALING) SO THANK YOU SAMMY FOR THAT !
*THE ONLY WAY TO RESOLVE IT IF YOU ARE NOT ROOTED IS TO REBOOT WHEN YOU SEE THAT YOUR CORES DON'T WANNA GO OFFLINE(CHECK THEM WITH PERMOM OR SYSTEM MONITOR...ETC.)
*ANOTHER WAY IS TO ROOT AND WHEN THE ISSUE HAPPENS YOU CAN FIX IT BY RESETING MP-DECISION OR THE BEST WAY IS TO INSTALL XPOSED FRAMEWORK AND THEN DOWNLOAD(DON'T FORGET TO ENABLE THE MODULE IN XPOSED AFTER YOU DOWNLOAD) FROM PLAYSTORE "SAMSUNG DVFS DISABLER" BY WANAM(JUST SEARCH IN PLAYSTORE THE WORD "DVFS" AND YOU WILL SEE IT - !
*OFC THAT AOSP OR CM BASED ROMS DON'T HAVE THE ISSUE !!!
BIG THANKS TO ALL THE GREAT GUYS ON LEAN KERNEL THREAD FOR CONTRIBUTING TO SOLVING THIS ISSUE
Click to expand...
Click to collapse
galaxy note 3 sm-n9005xxufng2 wanam xposed Touchwiz DVS working perfect
Related
Hi Folks
This is a mod NFC service that runs at boot. It allows you to scan NFC tags either with the screen totally off, or with the screen on but still at the lockscreen. By default nfc will not work unless the screen is on and unlocked. download one of the zips below, and flash it via recovery (tested with Omega Rom). To restore to stock, just pick the stock version.
Also build JUBMG3 and onwards has a further feature which allows NFC payments to work on deodex roms. credits to romracer, for the original mod to disable the signature checking
any feedback appreciated.
Remember to backup before flashing. for that just it case situation.
Enjoy Optimal
p.s. remember people that leaving the NFC on all the time can leave you phone open to security breaches. so please be careful when using this mod.
Updated to include XXUBMF4 build 20/06/2013 (Removed)
Updated to include XXUBMF8 build 24/06/2013 (Removed)
Updated to include JUBMG3 build 17/07/2013
Updated to include XUBMGA build 21/07/2013
Updated to include XUBMG1 build 25/07/2013
Updated to include CUAMF3 build 05/08/2013 for AT&T Samsung Galaxy S4
Updated to include TMobile screenoff version for niccuany and other TMobile S4 Users 07/08/2013
Updated to include XUBMH1 build 30/08/2013
Updated to include XUBMG4 build 06/09/2013
Updated to include CM 10.2 build 08/09/2013
Updated to include PacMan 4.3 build 08/09/2013
Updated to include XUDMH8 build 13/09/2013
Updated to include pACmAn Rom build 4.3-eng.build.20131001
Updated to include XXUDMI1 build 08/10/2013
MI8 will follow shortly :laugh:
OptimalKiller said:
Hi Folks
Just got my S4 i9505 today I'm so happy, anyway I thought I would create a NFC Lockscreen mod for the S4. What this does is allows you to use nfc when the screen is on and in a locked status. As by default the phone has to be unlocked.
Click to expand...
Click to collapse
Thanks for this, I was looking for something like this.
If I understand correct this the Lockscreen mod still needs to have the "locked" screen on in order for NFC to work.
If so is there a change you can also make the "screen off" (NFC working with locked screen off) mod for the XXUAME2 version :fingers-crossed:
It would be great to have it for i9500 too.
I was using this mod on i9300 and found it very usefull :good:
+1 Can you make NFC works with screen off? I had this feature in my s3 and it was very good reason to use NFC stickers
Ok will take a look this week. I always found the screen of version did not work after a while. Thats why I never used it. But if there is a need I will try to port it accross.
Optimal
Sent from my GT-I9505 using Tapatalk 2
Does it work on Omega v3?
jfm91 said:
Does it work on Omega v3?
Click to expand...
Click to collapse
Yes it does. I have the mod installed and NFC is no working with a locked screen on Omega v3
Im running it omega v3 and its working without any problems. Using tasker and nfc locale.
Sent from my GT-I9505 using Tapatalk 2
Screen off version added.
Any feedback appreciated.
Enjoy Optimal
OptimalKiller said:
Screen off version added.
Any feedback appreciated.
Enjoy Optimal
Click to expand...
Click to collapse
Thanks, I will try it in the morning and report back :good:
thanks kantjer feedback is always good, i thought my phone was running hotter with this mod, but it could be my hot palms. lol
OptimalKiller said:
thanks kantjer feedback is always good, i thought my phone was running hotter with this mod, but it could be my hot palms. lol
Click to expand...
Click to collapse
I have been running the "screen off" mod now for about 2 hours and it's working great, I can now read the NFC tag with my my locked screen off :good:
Haven't noticed anything with regards to my phone getting any warmer than before, also battery usage doesn't seem to have increased.
Thanks for adding this mod, I can now start using NFC lite I want to be.
EDIT: using this mod in combination with "NFC ReTAG" and Tasker.
kantjer said:
I have been running the "screen off" mod now for about 2 hours and it's working great, I can now read the NFC tag with my my locked screen off :good:
Haven't noticed anything with regards to my phone getting any warmer than before, also battery usage doesn't seem to have increased.
Thanks for adding this mod, I can now start using NFC lite I want to be.
EDIT: using this mod in combination with "NFC ReTAG" and Tasker.
Click to expand...
Click to collapse
EDIT 2: after a while day of running this mod I can safely say it's running great. No negative side effects like higer battery drain.
Sent from my GT-I9505 using Tapatalk 4 Beta
Thanks for the great feedback. I have also been running the screenoff mod aswell. I can confirm the phone does not run hot. Must have been my hot hands. And so far 22 hours and still working great. Much more reliable than the sgs3 mod. Could have been my phone.
This is now going to be my default. As I always wanted this mod to work when the screen was off.
Happy days
Optimal
Sent from my GT-I9505 using Tapatalk 2
Wow,
Was waiting for this! Going to flash this (screen off version) and report back.
Sent from my GT-I9505 using xda premium
Hi,
Do we need a custom recovery to flash this? I have a stock ME2 rom, rooted with CF-auto-root, I have flashed the lockscreen mod from the stock recovery but I've received a message "signature verification failed" and NFC doesn't work with lock screen... Still works when unlocked though.
turt said:
Hi,
Do we need a custom recovery to flash this? I have a stock ME2 rom, rooted with CF-auto-root, I have flashed the lockscreen mod from the stock recovery but I've received a message "signature verification failed" and NFC doesn't work with lock screen... Still works when unlocked though.
Click to expand...
Click to collapse
You need a custom recovery to flash zips, you can try to extract the NfcNci.apk from the zip and copy it to \system\app set the correct permissions and reboot.
If you're routed it should work.
Working fine with xxuame2 pre rooted deodexed by @djembey
Envoyé depuis mon GT-I9505 avec Tapatalk
So nice. Thank you!
Sendt fra min GT-I9505XXUAME2 Omega v3.0/Faux123 Kernel
Glad its all working well. When samsung release a new updated rom, I will create an updated nfc mod and I will post on this thread.
As I said before the screenoff version has been solid for 4 days and very little battery drain. Which has shocked me.
Optimal
Sent from my GT-I9505 using Tapatalk 2
hello, this is not my work, but thanks to bxfxf we have a port of miui kitkat v5 for s4 international, i just added all languages with jbart and ported alucard kernel (latest) also optimized dalvik and bionic works good it is CYANOGENMOD BASED, and MULTILANGUAGE
enjoy
https://mega.co.nz/#!wdRlxCrL!K9CIFJSN3HQuhysHaOQPeIdInbR7rMBVZDS7E_F1a8E 4.8.10 multilanguage, thank to Sebastiaanlabr
https://mega.co.nz/#!INsjAYJC!Q_wasjXCMSiVpiOKraOT6kN99eEyVqoDwpSozJTDyjw 4.7.5 by me multilanguage, working good
http://www.mediafire.com/download/d7ubrl7uo79x269/MIUI-KT-SGS4-KK4.4-AOSP-INTL-07.12.2014.zip KT kernel ported for miui thank you PEY
https://mega.co.nz/#!0UEhCbpD!Xj6oHqc7voffCG4U91nqEhhon3uJjP_VM5WHGdPoNCQ Alucard kernel 2.6.9b ported for miui
https://mega.co.nz/#!hJkSDI6J!QFAWJvfkdk4z-FyjUIT4DrP2ZVsqFKUlYvbUZHS7JQ4 optmized dalvik
https://mega.co.nz/#!xMdmRapS!-mRaNwanY8hjPcgxe412lE8VlhMRfGvb0jPjcjkxzj0 optimized bionic
https://goo.im/gapps/gapps-kk-20140606-signed.zip/ gapps
https://mega.co.nz/#!WFUSCYiI!SenkQJcB9nHeWtpBXwcsHm5GnOUZEc6AgyG7JX6kGaI Googy kernel ported for miui thanks to aanjos
you can mirror enjoy and report bugs
Dude finally! Will try when back from holidays
Is this TW based?
*oops, must have skimmed right past that. I read the top part and looked at the links.
Sent from my SGH-I337 using XDA Premium 4 mobile app
highaltitude said:
Is this TW based?
Sent from my SGH-I337 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Read please
Sent from my SGH-I337M using XDA Free mobile app
Will it work if I dirty flash it over current miui jb based rom?
I think it should, but I don't wanna risk it xD
Thanks
how to root this rom?
figured out myselfe, via odin flash this http://download.chainfire.eu/316/CF-Root/CF-Auto-Root/CF-Auto-Root-jflte-jfltexx-gti9505.zip
nofx161 said:
how to root this rom?
figured out myselfe, via odin flash this http://download.chainfire.eu/316/CF-Root/CF-Auto-Root/CF-Auto-Root-jflte-jfltexx-gti9505.zip
Click to expand...
Click to collapse
Rom is already rooted, just have to activate it in settings. -> Security -> Permissions
best rom i've ever tested ... the battery life ... the speed no lag at all ... the theme
but one thing is missing "i can only use 3G no choice for 4G LTE"
How can i turn LTE on?
- Dial "*#*#4636#*#*"
- Phone Information
- change [LTE/GSM] to [LTE/GSM/WCDMA]
lorismarcos said:
Will it work if I dirty flash it over current miui jb based rom?
I think it should, but I don't wanna risk it xD
Thanks
Click to expand...
Click to collapse
i think not, better to full wipe
!
battery runs out quickly
There are fast but choppy
AnTuTu results: 250091
Gonna test this badboy, thanks to OP and porter for the work they have done!
-- Edit;
Have anybody got ART working on this beloved rom? Just asking if it's possible or not?
Any bug?? Works with new bootloader with knox?? Thanks in advice
Who is the owner?
Enviat desde el meu Galaxy S4
carmos said:
Any bug?? Works with new bootloader with knox?? Thanks in advice
Who is the owner?
Enviat desde el meu Galaxy S4
Click to expand...
Click to collapse
only bug is lte that you have to select by dialpad, yes it works with knox
Also Compass doesnt work. But really good job :fingers-crossed:
Wath is bionic??
carmos said:
Any bug?? Works with new bootloader with knox?? Thanks in advice
Who is the owner?
Enviat desde el meu Galaxy S4
Click to expand...
Click to collapse
I can't select another lockscreen types, I always get FC in settings.
A little slow, especially lockscreen. The UI is lagging and unresponsive at times. I tried interactive governor and it is a bit better.
Phone (dialer) hanged on me a few times when opening.
The phone never sleeps - Google Services is the cause, in my experience it's a bug with wifi scanning but I never investigated further (disabling location reporting and background wifi scan usually helps).
I only tried with alucard kernel from the start? Do we need to flash alucard or is it working with some stock one?
zvieratko said:
A little slow, especially lockscreen. The UI is lagging and unresponsive at times. I tried interactive governor and it is a bit better.
Phone (dialer) hanged on me a few times when opening.
The phone never sleeps - Google Services is the cause, in my experience it's a bug with wifi scanning but I never investigated further (disabling location reporting and background wifi scan usually helps).
I only tried with alucard kernel from the start? Do we need to flash alucard or is it working with some stock one?
Click to expand...
Click to collapse
I have not experienced any of these problems with stock kernel. Try with that one.
Cant change security lockscreen
Sent from my SGH-I337M using XDA Free mobile app
First off, you do this at your own risk and I'm not responsible for any damage to your phone etc etc. Also, thanks to it's ties with Sound Alive, it won't work with the stock music player unfortunately but I have tested it with both Spotify and GoneMad and it works perfectly with both.
I'm using this on AryaMod 3.1, so this should mean the instructions below work on any N9005ZSUGOA5 based Lollipop rom.
1) Download and install DarkQueen Kernel here. Thank @hiepgia.
2) Add the line "setenforce 0" (without the quotes) to the end of the file /sýstem/etc/init.qcom.post_boot.sh. This will ensure a permissive state on boot. Thanks to @hiepgia and @filchi756 for this.
3) Download and install the new Viper4Android 2.3.4.0 here. Run, install the driver.
4) Find and freeze/delete Sound Alive. This being present is bad in particular for Spotify, which will always use Sound Alive in preference to Viper4Android.
Reboot enjoy Viper goodness.
For people who want to use the stock player, see @filchi756 post here
For people running AyraMod V4.0, ignore the above instructions, select DarkQueen kernel via Aroma on install (this will automatically result in permissive SE) and please see @filchi756's modified zip here. Don't forget to thank him.
Awesome
Finally!
Oh I am seeking for that. :good::good::good:
After flashing this kernel, WiFi stopped working... Anybody else has this issue? SM-N9005
slavko17 said:
After flashing this kernel, WiFi stopped working... Anybody else has this issue? SM-N9005
Click to expand...
Click to collapse
it works fine like a charm
Unfortunately, it won't work for me... As soon as I flash stock kernel back - wifi is working like a charm again. Tried to do factory reset after flashing this Dark Queen Kernel - it didn't solve the problem.
Any suggestions would be appreciated.
slavko17 said:
Unfortunately, it won't work for me... As soon as I flash stock kernel back - wifi is working like a charm again. Tried to do factory reset after flashing this Dark Queen Kernel - it didn't solve the problem.
Any suggestions would be appreciated.
Click to expand...
Click to collapse
We have the same situation. .I think we have to wait for google to release the lollipop sources for note3 and wait for someone to make a custom kernel intended for our phone.
OP updated.
You eventually did it. Well done!
Nice one! Could anybody make it work with the stock Samsung Music Player using this tutorial? It seems this app is deeply integrated with SoundAlive, so at least with KK it was impossible to make it work reliably with V4A. But things may have changed with LL...
Yeah, unfortunately it appears to be the same here. I froze Sound Alive to get Viper working with Spotify, but this results in no effects whatsoever with the stock music player. Personally, this doesn't bother me as there are far better players on the market.
slavko17 said:
After flashing this kernel, WiFi stopped working... Anybody else has this issue? SM-N9005
Click to expand...
Click to collapse
What baseband are you on? You have the same phone model as myself and my wifi works fine. I suspect it might be related to your modem/NON-HLOS.
Overall everything works fine except few bugs from the Darkqueen kernel, like brightness changes sometimes when I lock/unlock the phone.
Attachement selinuxpermissive installation failed :crying:
rafik25 said:
Attachement selinuxpermissive installation failed :crying:
Click to expand...
Click to collapse
What fails? Did you give it full permissions?
Try this one instead.
Beefheart said:
What baseband are you on? You have the same phone model as myself and my wifi works fine. I suspect it might be related to your modem/NON-HLOS.
Click to expand...
Click to collapse
I'm on the newest XEO Lollipop available from sammobile, so the modem version I have is BNL8.
Thanks for trying to help me
I'm on GNH1 myself. Might be worth trying another to see if the WIFI works.
Sir please help us too. I'm using galaxy s4 i9500 with official lollipop installed. we don't have any permissive kernel.
jagnik said:
Sir please help us too. I'm using galaxy s4 i9500 with official lollipop installed. we don't have any permissive kernel.
Click to expand...
Click to collapse
If you're correct and there is no kernel which is either permissive or can be made permissive then Viper is currently unusable on the Exynos variant of the S4. It's currently impossible to use Viper on an enforcing TW ROM.
For those of you that don't know Viper4Android is the probably the best sound mod you can do on any android phone, I can confirm that it works on the Note 5 as my listening experience in the car has greatly improved
Prerequisites
-Must be rooted
-Skyhigh or arter97 kernel flashed
-If no custom kernel is flashed selinux must be set to permissive using the selinux app found here http://forum.xda-developers.com/showthread.php?t=2524485
-Download Viper4Android from here http://forum.xda-developers.com/showthread.php?t=2191223
Steps
1. Download and install this zip through recovery http://forum.xda-developers.com/att...achment.php?attachmentid=3470840&d=1442036930 (Credits to Critical Detox for finding it)
2. Launch Viper4Android and install the driver and reboot
2a. I highly recommend using this IRS. http://d-h.st/VBM
That should be it to get it working, S6 users have commented that you have to freeze a couple of apps for it to work but I can confirm that's not the case. If you have any questions or need suggestions feel free to ask
adolfo778 said:
For those of you that don't know Viper4Android is the probably the best sound mod you can do on any android phone, I can confirm that it works on the Note 5 as my listening experience in the car has greatly improved
Prerequisites
................
That should be it to get it working, S6 users have commented that you have to freeze a couple of apps for it to work but I can confirm that's not the case. If you have any questions or need suggestions feel free to ask
Click to expand...
Click to collapse
I have had this working on every device, previously the S6 using a flashable zip.
Now I cannot get it to process when clicking on driver status it usually says "yes".
I am using a deodexed tmobile rom with Noble kernel. The SELINUX changer says I am permissive but viper4android doesnt want to work.
Any suggestions?
Thanks
adolfo778 said:
For those of you that don't know Viper4Android is the probably the best sound mod you can do on any android phone, I can confirm that it works on the Note 5 as my listening experience in the car has greatly improved
Prerequisites
-Must be rooted
-Skyhigh or arter97 kernel flashed
-If no custom kernel is flashed selinux must be set to permissive using the selinux app found here http://forum.xda-developers.com/showthread.php?t=2524485
-Download Viper4Android from here http://forum.xda-developers.com/showthread.php?t=2191223
Steps
1. Once downloaded don't flash in recovery(FC'ed on me), unzip the file and there should be two apks. Only install the one with the higher file size(Should be 5mb)
2. Launch Viper4Android and install the driver and reboot
2a. I highly recommend using this IRS. http://d-h.st/VBM
That should be it to get it working, S6 users have commented that you have to freeze a couple of apps for it to work but I can confirm that's not the case. If you have any questions or need suggestions feel free to ask
Click to expand...
Click to collapse
Can you screenshot your setup.
Sent from my SM-N920T using Tapatalk
Brava27 said:
I have had this working on every device, previously the S6 using a flashable zip.
Now I cannot get it to process when clicking on driver status it usually says "yes".
I am using a deodexed tmobile rom with Noble kernel. The SELINUX changer says I am permissive but viper4android doesnt want to work.
Any suggestions?
Thanks
Click to expand...
Click to collapse
Original Post says you have to use SKYHIGH or ARTER97 kernel...
I couldn't get it to work. It would enable, but not process. Could you take some screenshots?
drathian1 said:
I couldn't get it to work. It would enable, but not process. Could you take some screenshots?
Click to expand...
Click to collapse
Interesting just checked, it say's not processing for me as well but playing around with the settings still changes the quality of the sound
charlieb620 said:
Can you screenshot your setup.
Sent from my SM-N920T using Tapatalk
Click to expand...
Click to collapse
adolfo778 said:
For those of you that don't know Viper4Android is the probably the best sound mod you can do on any android phone, I can confirm that it works on the Note 5 as my listening experience in the car has greatly improved
Prerequisites
-Must be rooted
-Skyhigh or arter97 kernel flashed
-If no custom kernel is flashed selinux must be set to permissive using the selinux app found here http://forum.xda-developers.com/showthread.php?t=2524485
-Download Viper4Android from here http://forum.xda-developers.com/showthread.php?t=2191223
Steps
1. Once downloaded don't flash in recovery(FC'ed on me), unzip the file and there should be two apks. Only install the one with the higher file size(Should be 5mb)
2. Launch Viper4Android and install the driver and reboot
2a. I highly recommend using this IRS. http://d-h.st/VBM
That should be it to get it working, S6 users have commented that you have to freeze a couple of apps for it to work but I can confirm that's not the case. If you have any questions or need suggestions feel free to ask
Click to expand...
Click to collapse
So how do I install the Dolby file?
Sent from my SM-N920T using XDA Free mobile app
Lmax579 said:
So how do I install the Dolby file?
Sent from my SM-N920T using XDA Free mobile app
Click to expand...
Click to collapse
using a file explorer move the IRS file to SDcard/VIper4Android/Kernel
adolfo778 said:
using a file explorer move the IRS file to SDcard/VIper4Android/Kernel
Click to expand...
Click to collapse
The viper I installed is the 2.3.4.0 that's the right one right?
Sent from my SM-N920T using XDA Free mobile app
Lmax579 said:
The viper I installed is the 2.3.4.0 that's the right one right?
Sent from my SM-N920T using XDA Free mobile app
Click to expand...
Click to collapse
you would be correct
adolfo778 said:
Interesting just checked, it say's not processing for me as well but playing around with the settings still changes the quality of the sound
Click to expand...
Click to collapse
Interesting. Are you running in compatible mode, then?
I envy all of you for getting to use Viper, I'm trying my best to hold out until I can try Samsung pay beta/release which ever comes first to me then I'll decide to root only after.
I've been wondering this for a while now. I noticed in the OP, there was a choice to use a custom kernel or stay with the stock one. Obviously, we need root to get Viper working BUT do we really need a custom kernel to root 5.1.1. On the Note 5? I'm asking because BOTH of my cars miss Viper from my Note 4 and I'm hearing the current Kernels are causing a few issues with the Note 5, thanks!
drathian1 said:
Interesting. Are you running in compatible mode, then?
Click to expand...
Click to collapse
Compatible mode works for me. Not regular mode
Sent from my Gorgeous Note5
Nihonno said:
I've been wondering this for a while now. I noticed in the OP, there was a choice to use a custom kernel or stay with the stock one. Obviously, we need root to get Viper working BUT do we really need a custom kernel to root 5.1.1. On the Note 5? I'm asking because BOTH of my cars miss Viper from my Note 4 and I'm hearing the current Kernels are causing a few issues with the Note 5, thanks!
Click to expand...
Click to collapse
You can root using the Noble Kernel which is pretty much a stock kernel and then use the selinux app to change the kernel to permissive.
drathian1 said:
Interesting. Are you running in compatible mode, then?
Click to expand...
Click to collapse
yes forgot to mention that Ill add that in the OP
Thanks for the reply, Adolfo. Are you having any issues with the Noble Kernel? People are reporting things like battery drain, rebooting and or loss of certain features, Netflix not work, etc. I miss Viper but I would like to know that my phone would be fully functional after root. Also, it seems as if only a few Kernels work with the new firmware that was released yesterday.
Keeps getting more complicated. haha.
Nihonno said:
Thanks for the reply, Adolfo. Are you having any issues with the Noble Kernel? People are reporting things like battery drain, rebooting and or loss of certain features, Netflix not work, etc. I miss Viper but I would like to know that my phone would be fully functional after root. Also, it seems as if only a few Kernels work with the new firmware that was released yesterday.
Keeps getting more complicated. haha.
Click to expand...
Click to collapse
Viper4android has nothing to do with Netflix not working, rebooting or battery drain.
Sent from my Gorgeous Note5
Brava27 said:
Viper4android has nothing to do with Netflix not working, rebooting or battery drain.
Sent from my Gorgeous Note5
Click to expand...
Click to collapse
While I appreciate the help, Brava, I was responding to Adolfo's recommendation of using the Noble kernel due to it being close to stock. My question was if he's having any issues with that Kernel.
I've used Viper since it's inception so I'm fully aware that it has nothing to do with any of the aforementioned symptoms.
Thanks though.
Hey guys!
Power users already have custom kernels and ROMs, and it is possible to tune some advanced settings with and without root, so what did you modified on yours?
A lot of users reported performance issues and others just want more features, more efficiency, etc. Of course, there are those who just likes the device the way it comes from Motorola or don't want to void the warranty.
With all this diversity, I created this thread for we discuss what is the best setup for our device and how can we extract the best of it.
Curently mine is with stock ROM, Xposed, GravityBox and squid's custom kernel.
This setup provides me all Moto features, plus lots of features with GravityBox. I think that the performance is better, because I changed some settings with Kernel Adiutor.
Why
fingerprinted said:
Why
Click to expand...
Click to collapse
Since each person uses a phone in a way, my idea was to create a space where people could tell which ROM, kernel, apps, themes and other things they use and share the benefits they get. This would make possible to all Moto X Play owners discover new things that could improve the user experience and everybody would win.
Stock rom, greenify, amplify (xda thread for great battery), lspeed mod. Works fine for me
LuizHenrique91 said:
Curently mine is with stock ROM, Xposed, GravityBox and squid's custom kernel.
This setup provides me all Moto features, plus lots of features with GravityBox. I think that the performance is better, because I changed some settings with Kernel Adiutor.
Click to expand...
Click to collapse
I find that installing xposed on my device causes choppy audio playback. Does this happen with you?
I'm using BlackPlayer and phonograph
hs-1993 said:
I find that installing xposed on my device causes choppy audio playback. Does this happen with you?
I'm using BlackPlayer and phonograph
Click to expand...
Click to collapse
Now I'm on Cyanogenmod with a custom kernel, both by squid.
But I remember that when I was on stock, I had no problems with audio neither before or after installing Xposed.
Ohh.. Alright, having never used an android device, how do you find the performance of the device on cyanogenmod compared to stock? Is it worth flashing?
hs-1993 said:
Ohh.. Alright, having never used an android device, how do you find the performance of the device on cyanogenmod compared to stock? Is it worth flashing?
Click to expand...
Click to collapse
Totally worth it! X Play doesn't have good performance with the stock ROM at this time. There are lags that we don't expect to find on a device at this price range. With Cyanogenmod the UI is very smooth. There are still some lags, but they're normal because we don't have a device with a Snapdragon 8xx. I can say you that with CM, the performance is just as good as you could expect of this hardware (and it's very good). If you are going to flash, I also recommend the squid kernel. It's great.
Here is the index of Moto X Play on XDA: http://forum.xda-developers.com/moto-x-play/general/17-10-t3227295
Thanks man, will let you know. I tried the squid kernel yesterday, phone wouldn't resume out of deep sleep
Any such problems with cyanogenmod that might have occured due to squid kernel?
hs-1993 said:
Thanks man, will let you know. I tried the squid kernel yesterday, phone wouldn't resume out of deep sleep
Any such problems with cyanogenmod that might have occured due to squid kernel?
Click to expand...
Click to collapse
The only problem I *think* some people have is that on certain wi-fi networks, the wi-fi driver prevents the phone from sleeping. I said *I think* because I don't have this issue and because of this I'm not sure whether it's already solved or if the problem persists. I suggest you to read at least the last pages from the threads of CM and the kernel for you to be sure.
What I can say is that for my usage, I have absolutely no problems. Everything works fine.
i'm using RR 5.5.8 + squid kernel latest update, greenify + amplify, working fine
Does Squid kernel (or Cyanogenmod ) solve the problem of RECENT APPS ?
I mean the impossibility for erasing them all with a single button.
peteich said:
Does Squid kernel (or Cyanogenmod ) solve the problem of RECENT APPS ?
I mean the impossibility for erasing them all with a single button.
Click to expand...
Click to collapse
Cyanogenmod has this feature.
LuizHenrique91 said:
Cyanogenmod has this feature.
Click to expand...
Click to collapse
thank you !
peteich said:
Does Squid kernel (or Cyanogenmod ) solve the problem of RECENT APPS ?
I mean the impossibility for erasing them all with a single button.
Click to expand...
Click to collapse
GravityBox on stock Rom as well :good: needs root + xposed though
brom25 said:
GravityBox on stock Rom as well :good: needs root + xposed though
Click to expand...
Click to collapse
Just found this feature myself earlier today!
Someone can explain me or give me the link on how to install xposed on my moto x thx
Envoyé de mon XT1563 en utilisant Tapatalk
aarmstrong23 said:
Someone can explain me or give me the link on how to install xposed on my moto x thx
Envoyé de mon XT1563 en utilisant Tapatalk
Click to expand...
Click to collapse
Flash TWRP, root the device then check this thread : http://forum.xda-developers.com/moto-x-play/help/xposed-t3191338/post63940401 to be sure which version to use.
Basically, flash the zip provided and reboot :good:
For the first time waiting a little before rooting this phone, since 6.0 is rolling out soon.
As of today mine is running quite smooth on stock 5.1.1
Just disabled all unused/useless apps,
limited the connections and data usage with Netguard and Opera max.
Will keep you posted.