okay, where to start.
I've a Nexus 7, and im running P.A 2.54, with twrp.
i got an article from one of my news apps about getting better volume for my nex 7 BeatsLouder, followed the link and downloaded, didn't do any information gathering and consequently i believe i've flashed the beatslouder for android 4.2 it was BeatsLouder v3b8 i believe.
Either way now, my tablet just hangs at the P.A splash screen/boot logo.
needless to say, with my lack of forward planning into researching what i was flashing i didnt make a back up either..
Are there any solutions that don't even a fresh wipe?
edit: so i had a back up in twrp, when i had the forethought to do a backup prior to installing something unknown, however i'm not certain if the back up is of data or system files or both, anyway to find out? the restoring of the back up seemed to happen almost instantaneously, making me think it didnt work?
oh, also i made a backup of everything (in its current broken state) in the hopes i might be able to recover my data?
would love some responses, anything to get the ball rolling
Try dirty flash your ROM then gapps in recovery again. No wipe needed.
NOOB HERE!!!
My quick and hopefully simple question regards installing the CM updates that are available directly on my phone. I am running 10.2 with no issues. Nearly everyday I get the icon stating there is an up to CM10. I simply click on it and install. Again, so far so good but I would like to know if simply installing these updates this way is "endangering" my phone. Is there a better way I should be installing these? I am assuming not otherwise the updates would not be present and as simple to install. Thanks for your input!
kcoop99 said:
NOOB HERE!!!
My quick and hopefully simple question regards installing the CM updates that are available directly on my phone. I am running 10.2 with no issues. Nearly everyday I get the icon stating there is an up to CM10. I simply click on it and install. Again, so far so good but I would like to know if simply installing these updates this way is "endangering" my phone. Is there a better way I should be installing these? I am assuming not otherwise the updates would not be present and as simple to install. Thanks for your input!
Click to expand...
Click to collapse
It is perfectly safe to use the built in cmupdater every day. For piece of mind it may be a good idea to occasionally make a backup manually using your recovery of choice (either TWRP or CWM).
If you ever encounter a problem after upgrading to the latest nightly, and nightlies do sometimes break features, just boot into recovery and manually flash the previous day's file (located in the /cmupdater folder)...no need to wipe anything.
I've been dirty flashing cm nightlies since June. You're fine. A clean flash doesn't hurt once in awhile though!
Thanks! I appreciate it!
I dirty flashed for a year with no problem at all untill a few days ago. I went from the 8/16 to the 8/17 to the 8/14 and lost my imei and eri once the 8/14 booted. Ive been trying everything with no luck to get the eri back. make sure you do a full (not just imei) NV back up and do a normal rom/data backup like once ever week or two. Im regretting not doing a NV backup as the only tool to fix my problem has been removed from the site due to infringing the ToS.
Hello I am still dealing with a weird problem that I posted on this forum over a year ago that was never resolved. Basically my tablet is stuck running Android version 4.1.1 (Build JRO03C.US_epad-10.4.4.25-20121228) because if I upgrade to any new versions (whether I do it as OTA or via micro USB) my wifi card stops functioning (it does not see any networks). Anyways I even went so far as to RMA it and Asus said they fixed it, shipped it back to me, but in reality all they did was roll me back to 4.1.1, saw the wifi was working and shipped it back to me saying they "fixed" it. Well of course the second I got it back I installed the OTA and wifi broke again... So I just rolled back to 4.1.1 and said screw it, I just won't update it anymore. Well this week I figured I'd try installing the latest OTA and hoped that this version would not kill my wifi, unfortunately the same exact issue has occurred and thus I have once again rolled back to v4.1.1 and my wifi works perfectly...
TLDR; Anyways apologize for the rant/story but basically I am stuck with using version 4.1.1 of Android and am considering flashing a custom rom to try and resolve some issues I am having with the stock rom's wifi, however the official bootloader unlock tools only say they work on version 4.0 (ICS) or version 4.2 (JB). I'm stuck on v4.1.1 so which tool should I use (or am I out of luck)? Thanks
v7 worked your JB version, but I think v8 will work as well. Just try them both - it's just an app. Either it works or not....
But that is the weirdest thing I've heard in a while (reg. WiFi).
What have you done on your router side? I cannot believe this is a problem with the tablet's wifi card.
Is this 'wifi not working' consistent on any router, any network?
Did you reset the router, change the channel?
Do you have possible interference: microwave, bluetooth speakers, bluetooth enabled or any other device that uses radio waves anywhere in the vicinity of the tablet?
berndblb said:
v7 worked your JB version, but I think v8 will work as well. Just try them both - it's just an app. Either it works or not....
But that is the weirdest thing I've heard in a while (reg. WiFi).
What have you done on your router side? I cannot believe this is a problem with the tablet's wifi card.
Is this 'wifi not working' consistent on any router, any network?
Did you reset the router, change the channel?
Do you have possible interference: microwave, bluetooth speakers, bluetooth enabled or any other device that uses radio waves anywhere in the vicinity of the tablet?
Click to expand...
Click to collapse
Thanks appreciate the reply - I just wasn't sure if using the wrong unlocker could brick my device... I'll give 8 a try first then 7 if necessary. The ironic part is that it requires a network connection to complete the unlock operation (I guess so Asus can cross your S/N forever off of their list of devices under warranty).
I agree that this is a strange problem as I have not seen anyone else report it. Basically I tried resolving this about 13 months ago with the help of this board and as mentioned I finally had to RMA it, but ASUS just rolled the version back instead of fixing anything and at that point I just wanted to enjoy using my tablet more than I wanted to fight with ASUS's customer service reps who effed up the first RMA job (the language barrier was also apparent in my interactions with them)...
Since over a year has gone by since the last time I tried an OTA, I hoped that the latest update would not have the same issues but alas, I'm not that fortunate.
As far as what I've tried - I have tried connecting to different networks and changing router channels and checking for interference, but the thing is, I'm quite certain the problem is with the tablet. When I first had the problem I lived in an apt building where I could 'see' 10+ wifi networks at any given time on all different channels with different routers/security settings etc. As soon as I applied the OTA the tablet could no longer 'see' any of them (even as I sat with my laptop/phone connected to wifi right next to it). I now live in a house (and have a different ISP, and a different router) and tablet works perfectly when on version 4.1.1. I don't have as many wifi networks visible from my house, but can still see a few of my neighbor's wifi networks both on the tablet (v4.1.1) and on other devices. But the second that I upgrade, all of them disappear from the tablet's view (but continue to be visible/work on other devices). I have turned wifi on/off, turned airplane mode on/off, tried connecting via wifi direct, rebooted, cold booted, booted into recovery, factory reset all data, etc. but nothing works because the tablet cannot see any wifi networks. And the second that I rollback to version 4.1.1 the wifi works perfectly... I have upgraded and rolled back probably at least 6 times and it is always the same result.
I do also get another weird side affect when I upgrade - the tablet refuses to turn off when I'm on any version higher than 4.1.1. So if I press "Shut Down", the tablet displays "shutting down" and the screen goes black and becomes non-responsive (as do the buttons, just as you would expect when turning off), but it does NOT actually shut down because if I come back 30 mins, an hour, 2 hours later I can feel it running very hot. The only way to truly shut it down is to let the battery drain...
So maybe a better question on my part would have been, do you think installing a custom ROM will even help resolve this issue? Or should I continue using 4.1.1 and not risk making the situation worse with custom ROMS?
WiFi problems are often kernel related..... Did you always take the update OTA?
Did you ever try to flash the latest firmware version manually? OTA updates do go wrong sometimes....
Although repeatedly???? It's weird. Maybe the server your tablet pulled the OTA from hosts a bad copy????
If you do not want to unlock, manually flashing the firmware would be one thing to try. OTA's patch the existing system, replace old files with new ones where necessary. Manually flashing the firmware replaces everything - a totally new installation of everything: bootloader, recovery, kernel, system and data.
But you cannot make it worse by flashing a custom rom. You unlock, flash a custom recovery (which does not change anything else on your system), then you make a nandroid (backup) of your current 4.1.1 system before you flash a rom. So you would always be able to go back to where you are now. On a custom rom you could even try out different kernels, which often are the root cause of wifi problems..
The thing is: If you want to flash a current custom rom like CROMi-X, based on Asus JB 4.2.2, or CROMBi-KK/CM11 which are KK roms, you always have to update your bootloader first. Your .25 bootloader is too old for any current rom.
You can easily do it once you have a custom recovery installed, but even easier would be to update to the latest Asus firmware 10.6.1.14.10 (after unlocking), then flash the custom recovery (TWRP 2.8.1.0), then flash a rom of your choosing.
Downside of this route would be you wouldn't have that 4.1.1 nandroid I mentioned earlier.....
Nahhh - thinking about it, I would recommend you go this route:
Unlock,
flash an older version of TWRP compatible with your current bootloader (TWRP 2.6.1.0 is ok)
make a nandroid of your current system
do a full wipe of cache, Dalvik and data in recovery
flash the 10.6.1.14.10 bootloader in recovery (I can talk you through it)
flash TWRP 2.8.1.0
flash a rom of your choice
Check out my guide, link in my signature, and let me know if you have questions
Thanks - I was able to successfully unlock my device with v7 of the unlock tool (v8 wouldn't even install). Thanks too for the advice on how to flash a custom rom safely. I've never flashed a custom rom before (have rooted a different android device before tho), so I appreciate any help.
I downloaded the blob file for TWRP 2.6.1.0 from here (techerrata.com/browse/twrp2/tf700t), but not sure how to proceed next, (also I don't see a link in your signature to your guide, but I am running a bunch of script blocking addins so maybe that's why) seems like all the guides I am finding say I need to get a copy of a fastboot program (but don't provide links), where can I find that? Again, I appreciate the help.
Sorry, my bad, I don't have a signature on XDA - wrong forum. LOL
My thread is here: http://forum.xda-developers.com/showthread.php?t=2688891
Ask any questions you may have in that thread, but it should cover your questions - I hope
Hi xdadevelopers,
I ordered a Motorola Photon Q 4G LTE (xt897c) phone from FreedomPop for $25 and 28 days later it has arrived. My experience with FreedomPop has been decidedly mixed. Lots of hassle from customer service combined with a product that is sometimes very useful and always cheap. (Unless you use over 2GB of data per month) The phone itself seems very adequate for an excellent price. I would like your assistance in putting Cyanogenmod or another appropriate ROM on it.
Here's where I am,
The phone appears to have been rooted out of the box according to "Root Checker Basic" from Google Play
I installed "Superuser" from Google Play and that seems to work correctly
Busybox seems to be present already according to "Online Nandroid" from Google Play
I have created a TWRP Backup using Online Nandroid without modifying the recovery
The phone currently has Android 4.1.2
Where I want to be
I want to install a custom recovery, preferably one I can make backups from
I want to update to a more recent version of Android such as the stable one found here DUCK RULES cyanogenmod bot org /?device=xt897c or another version where everything just works
Notes. I have ADB and Fastboot installed from "Android Studio". I have an appropriate USB cable. I do not have a microsdhc card right now. It appears "Sandisk 64GB Extreme Micro SD (SDXC) Card + Adapter 60MB/s Class 10 U3 UHS-1" at DUCK RULES amazon bot com /gp/product/B00N98QLRQ is a good choice for a good price. I have this on order and should have it within the week.
I understand this phone has a locked bootloader. The "Messaging" app from FreedomPop available in Google Play seems to control messaging and the phone dialer. I went to the official Motorola Bootloader unlock page DUCK RULES motorola-global-portal bot custhelp bot com /cc/cas/sso/redirect/standalone%2Fbootloader%2Funlock-your-device-b I booted into recover with Power and volume up and volume down held, selected fastboot, connected to the computer , ran fastboot, as described, got the code, put the code in the webpage as described, and got a blank page. This happened 2x, with no emails form Motorola. I tried a third time 6 hours later, and it loaded a page with more instructions and I had the bootloader unlock code in my email instantly (There were no preceding messages, they didn't go to spam or somewhere else). I have installed TWRP Manager by Jmz software from Google Play. The standard reboot method doesn't work I changed the settings to "Reboot using an alternate method". I attempted to the TWRP recovery with the "Install TWRP". One must select their device and the closest thing to mine was "Motorola Photon 4G" codename "sunfire". This didn't appear to be it exactly but there wasn't a better choice. The next line down says "custom recovery not installed or detected". Then I selected the recovery version to install "2.6.3.0" "openrecovery-twrp-2.6.3.0-sunfire.img appeared the most recent, then I attempted to "Install Recovery" The phone downloaded the image, and said "Ensure the partition listed below is the correct one for your device..." "/dev/block/mmcblk0p10" how do I know if that's correct or not? I said yes to the question and went ahead, the phone rebooted to an Android on it's side with a yellow triangular sign with an exclamation point above it. Thirty seconds later the phone rebooted normally and everything worked no custom recovery was flashed.
Also thanks to the xdadevelopers community for your past and future efforts. I threw in my lot with Android when the neXus One launched after watching the keynote, buying it full price and paying extra for next day air shipping. I stayed stock despite the cool stuff being done by the development community until Google fell behind in updates. Then I started with CM6 and later went to CM7. That was wonderful software, thanks everyone who was involved in that. Unfortunately way late in the life of my phone I was homeless and got robbed for it. I got a used HTC HD7 Windows Phone for free from a friend. It was great for movies and music with a great screen and touch sensor but it was very early in the life of the new Windows Phone and there wasn't a lot of quality software being developed. That, and it just wasn't Android, and I longed for freedom. The integrated Web browser IE 9 variant sucked, and T-mobile denied me the final Windows Phone 7 update. The phone has gotten less and less useful as time went by though it always sucked for web browsing. This fall I got a One Plus One, it made a wonderful Wifi phablet, but when I tried to use it as a phone I found the radio was severely deficient in range, possibly due to defective manufacture as it got better range in colder weather. I had to initiate a chargeback with my credit card company to get support to talk to me and then ultimately get a refund. That's how I got where I am now and this is the first time I've needed to register for an account here. Thanks again xdadevelopers.
What is the best way to proceed? Semi detailed logical instructions please, as while I am intelligent and not a noob, I have been out of the game since CM7
Code:
.. ("`-''-/").___..--''"`-._
.. `6_ 6 ) `-. ( ).`-.__.`)
.. (_Y_.)' ._ ) `._ `. ``-..-'
.. _..`--'_..-_/ /--'_.' ,'
.. (il),-'' (li),' ((!.-'
Holy wall of text. This seems to be the crux:
Aslan_ said:
I have installed TWRP Manager by Jmz software from Google Play. The standard reboot method doesn't work I changed the settings to "Reboot using an alternate method". I attempted to the TWRP recovery with the "Install TWRP". One must select their device and the closest thing to mine was "Motorola Photon 4G" codename "sunfire". This didn't appear to be it exactly but there wasn't a better choice. The next line down says "custom recovery not installed or detected". Then I selected the recovery version to install "2.6.3.0" "openrecovery-twrp-2.6.3.0-sunfire.img appeared the most recent, then I attempted to "Install Recovery" The phone downloaded the image, and said "Ensure the partition listed below is the correct one for your device..." "/dev/block/mmcblk0p10" how do I know if that's correct or not? I said yes to the question and went ahead, the phone rebooted to an Android on it's side with a yellow triangular sign with an exclamation point above it. Thirty seconds later the phone rebooted normally and everything worked no custom recovery was flashed.
Click to expand...
Click to collapse
Why would you flash something that is OBVIOUSLY not for your device!? I sincerely hope it did nothing because you could do some permanent damage to your device by flashing stuff that's not made for it.
Did you bother looking for any recovery threads? Say my TWRP thread?
I recommend 2.7.1.2 in that thread, which is fine for CM11. If you want CM12, grab 2.8.5.0 in that thread.
Flash it per my directions using fastboot in my TWRP thread.
Got it thanks, now which rom?
Thank you very much arrrghhh. First off I sucessfully flashed TWRP 2.7.1.2. I did see the "[recovery] TWRP 2.7.1.2" thread, but it was from 2012 and it's 2015 now, plus it was 25 pages. Now I do see that the initial post was last edited 23rd July 2014, so that's better, but that's still over six months ago, so I'd have asked the question anyway having seen that. Several things to note, GooManager has been retired since the new cdn for goo.im was implemented, so that should be removed from the post. I like apps, they make me feel like there's less risk in my actions, though after some poking around I see it's probably the opposite. People are doing so much more low level stuff in apps compared to CM7 it's amazing.
arrrghhh said:
I recommend 2.7.1.2 in that thread, which is fine for CM11. If you want CM12, grab 2.8.5.0 in that thread.
Click to expand...
Click to collapse
It would be nice to see that info in the 2.7.1.2 thread. that the newer version is recommended for CM12 and where to get it, that would show you're on top of the latest changes not to mention make the thread even more useful. Perhaps include the reason for stopping at 2.7.1.2, the SELinux split. Seeing a new version that works always makes me want to get the newer version, but in this case there's a good reason not too.
I'm always hated vague it's broken posts that don't adequately describe the problem, the hardware used and the environment, so I head in the opposite direction with mine.
Next question is which rom should I choose? I want something stable and secure with everything or just about everything working. I like Cyanogen Mod, but I'm open to other things. As new as I can get, but stable. I thought I needed something from download bod cyanogenmod bot org /?device=xt897c , but now looking around it looks like I might be able to use other sources like download bot cyanogenmod bot org /?device=xt897 I'm not sure though. Again I have the Motorola Photon Q 4G LTE which is CDMA, from FreedomPop running on the Sprint Network.
Code:
.. ("`-''-/").___..--''"`-._
.. `6_ 6 ) `-. ( ).`-.__.`)
.. (_Y_.)' ._ ) `._ `. ``-..-'
.. _..`--'_..-_/ /--'_.' ,'
.. (il),-'' (li),' ((!.-'
Aslan_ said:
Thank you very much arrrghhh. First off I sucessfully flashed TWRP 2.7.1.2. I did see the "[recovery] TWRP 2.7.1.2" thread, but it was from 2012 and it's 2015 now, plus it was 25 pages. Now I do see that the initial post was last edited 23rd July 2014, so that's better, but that's still over six months ago, so I'd have asked the question anyway having seen that. Several things to note, GooManager has been retired since the new cdn for goo.im was implemented, so that should be removed from the post.
Click to expand...
Click to collapse
I no longer use this as my primary device, so my threads are basically stagnant. fastboot always works, where apps come and go... I'll try to find some time to adjust the post.
Aslan_ said:
It would be nice to see that info in the 2.7.1.2 thread. that the newer version is recommended for CM12 and where to get it, that would show you're on top of the latest changes not to mention make the thread even more useful. Perhaps include the reason for stopping at 2.7.1.2, the SELinux split. Seeing a new version that works always makes me want to get the newer version, but in this case there's a good reason not too.
Click to expand...
Click to collapse
Reason for stopping at 2.7.1.2 was they implemented MTP in 2.8.x, and I could never get it working right for both Win & Lin. I spose my bar was too high and I should've just released it, but I hate releasing half working stuff. It was a new feature that didn't work right.
Again, this is no longer my primary device so I'm not working on it very much at all. I have to pry the thing from my roommate's hands to even play with it, I haven't flashed CM12 yet (because it's no longer my device really).
I'd like to update the official TWRP, but in the meantime the CM maintainer has taken care of updating it so F2FS can be utilized.
Aslan_ said:
Next question is which rom should I choose? I want something stable and secure with everything or just about everything working. I like Cyanogen Mod, but I'm open to other things. As new as I can get, but stable. I thought I needed something from download bod cyanogenmod bot org /?device=xt897c , but now looking around it looks like I might be able to use other sources like download bot cyanogenmod bot org /?device=xt897 I'm not sure though. Again I have the Motorola Photon Q 4G LTE which is CDMA, from FreedomPop running on the Sprint Network.
Click to expand...
Click to collapse
Well obviously some of that does go down to choice - if you want CM, it is a little confusing. The device started out in CM10 as its own device, xt897 for GSM xt897c for CDMA. Then in CM11 they merged the devices into moto_msm8960. Of course they had to split again when the new bootloaders were released for the other moto_msm8960's (Razr HD, Atrix HD, etc) and moto_msm8960_jbbl was kind of a stopgap device at the end of CM11. Again, reading is your friend here although I realize all of that history is hard to glean. At least read the OP of the CM thread:
kabaldan said:
Please note:
In CM12, the Motorola 2012 msm8960 device line has been de-unified again, so moto_msm8960/moto_msm8960_jbbl builds are dead from now on.
Please check the xt897 device link for new Photon Q builds.
Click to expand...
Click to collapse
Good luck. The device is now semi-unified (GSM & CDMA), as xt897.
Aslan_ said:
[*]I have created a TWRP Backup using Online Nandroid without modifying the recovery
Click to expand...
Click to collapse
Would you mind terribly to share this? My device shipped with a Sprint branded ROM and I'd like a proper backup.
I flashed CM 12.1 and lost data (3g/LTE) connection
I tried to flash FreedomPOP APN fix but it did not help
Anyone knows how to fix this?
How do I update PRL/Profile on CM 12.1?
turbozapekanka said:
I flashed CM 12.1 and lost data (3g/LTE) connection
I tried to flash FreedomPOP APN fix but it did not help
Anyone knows how to fix this?
How do I update PRL/Profile on CM 12.1?
Click to expand...
Click to collapse
You don't update PRL/Profile in CM, you do that on the stock ROM. Make sure EVERYTHING works on stock before flashing CM.
I found another APN fix and it worked.
So the result of the update PRL/Profile is stored somewhere in the phone and does not get lost when I flash a new ROM, is that correct?
The only way to update PRL/Profile is to flash back to stock, do update, reflash back to custom, right?
turbozapekanka said:
I found another APN fix and it worked.
So the result of the update PRL/Profile is stored somewhere in the phone and does not get lost when I flash a new ROM, is that correct?
The only way to update PRL/Profile is to flash back to stock, do update, reflash back to custom, right?
Click to expand...
Click to collapse
Correct.
turbozapekanka said:
I found another APN fix and it worked.
So the result of the update PRL/Profile is stored somewhere in the phone and does not get lost when I flash a new ROM, is that correct?
The only way to update PRL/Profile is to flash back to stock, do update, reflash back to custom, right?
Click to expand...
Click to collapse
Can you share this "another APN fix"?
already shared here http://forum.xda-developers.com/showpost.php?p=60153295&postcount=18
Anyone still have issues? I was running a June Nightly and it was working somewhat. It would randomly lose connection and I would have to flash the APN.zip. It happened again a few days ago and I decided to go up to 722 Nightly and now I haven't been able to connect. When I go to APNs the list is empty and even if I manually add one it does not seem to stick. The APN zip doesn't help either. The phone is connected but shows an exclamation mark next to the signal and I have no data.
Sort of solved my own problem
Flashed back to stock Spring using RSD lite and a modified XML that didn't flash the system.img since it kept giving me errors. Found a stock TWRP dump on the forums and flashed that. Updated PRL and Profile, reflahsed back to CM11 Snapshot and flashed the 2015 FreedomPOP APN fix. Working for 1 day now.
I recently ran into the issue during custom rom work. I reflash the stock android ZIP, it starts booting, then I hard reset it with the power button and try to reach bootloader again. This, as it turns out, is terrible to do if you want a fast setup. The moment it starts and you reboot it, the boot image is corrupted (that's my guess) because escaping the boot screen during a clean flash bricks your phone. If you're reading this, it happened to you as well.
The answer is so flipping obvious and it took me an hour to figure it out - nowhere on the internet is there a "solution" for this problem, no matter how frequent it is. But there are lots of people who deal with this, whether still on their factory images (like the Pixel 3 EDL issue) or like me bouncing from custom to stock. So here's the answer:
ALL YOU HAVE TO DO IS SIDELOAD THE CURRENT SOFTWARE OTA OR A BETA OTA FROM ANOTHER FUTURE VERSION.
It doesn't recognize timestamps before your current software, so you'll need to assume you're on the latest of whatever you're on and do that. Future versions work as well, so if you wanted to reach 12 in one shot, your phone's bootloader would fully accept it as long as the file isn't corrupted. If you need a sideloading or flashing guide, here you go.
For me, I flashed the latest build of Android 11 (August patch) and rebooted during the boot up. What I did was download the OTA of the same exact file to my laptop, and entered adb sideload coral.xxx.x.zip. (The name of the file) It ran all the way through and it started up perfectly normal.
I hope this helps someone!
P.S. I don't have any pictures or tutorials, I only wrote this to help others understand what happened and how to fix it. Probably wouldn't have needed to say it if the forum for it existed.