Related
I've been looking around at different forums to see how to get my phone back to normal and there many ways to do it and I'm stuck.I'm able to use clockwork recovery,able to use fastboot but SD card is mounted and has an error everytime I try unmount , been trying to use the command propmt not that experienced I need some guidance to how to get another rom on phone
Try to flash the stock recovery, relock the bootloader with "fastboot oem lock" and flash a RUU.
Then try again from the beginning
Do I use the command propmt or Fastboot or clockwork
dannyzat said:
Do I use the command propmt or Fastboot or clockwork
Click to expand...
Click to collapse
Open cmd prompt. Navigate to folder where your fastboot program is (i.e. c:\android is where I put mine).
Plug in phone, boot into bootloader and click power to access fastboot.
Type in the "fastboot OEM lock" command in command prompt as suggested by torxx and that will relock the bootloader. Then flash ruu in bootloader
Sent from my HTC VLE_U using Tapatalk 2
I did all of that except for the last sentence how do I flash on command prompt
dannyzat said:
I did all of that except for the last sentence how do I flash on command prompt
Click to expand...
Click to collapse
Once u relock bootloader, you are done with command prompt... I think. I havemt done it on this phone, but usually you put ruu on root of sdcard (internal in this case) and reboot into bootloader and the ruu should begin flashing from there. Make sure its named properly. I'm sure there are threads regarding this
Sent from my HTC VLE_U using Tapatalk 2
still learning how to develope android phone's
Ok I'm on bootloader but idk. How to put the ruu on my sdcard if its mounted
dannyzat said:
Ok I'm on bootloader but idk. How to put the ruu on my sdcard if its mounted
Click to expand...
Click to collapse
try the adb command just go to this link http://forum.xda-developers.com/showthread.php?t=1667929 everything is there
ok i looked at the link and try to push the rom but the adb is not even detecting my device
this is what i get:C:\Documents and Settings\Jamal\Android>adb push rom.zip/sdcard
Android Debug Bridge version 1.0.29 and then all the information about adb about the options and commands
Im on fastboot right now and using the command prompt still, the bootloader is unlocked, and i dont think adb has dected my device beacause it does this for every command: C:\Documents and Settings\Jamal\Android>adb shell
error: device not found
C:\Documents and Settings\Jamal\Android>adb remount
error: device not found
C:\Documents and Settings\Jamal\Android>adb root
error: device not found
ps. my device is connected to the computer fastboot commands work but not adb
try installing the htc drivers for the One S then retry adb
ok so i just did this recently:C:\Documents and Settings\Jamal\Android>fastboot boot rom.zip
creating boot image...
creating boot image - 468381696 bytes
downloading 'boot.img'...
OKAY [946.172s]
booting...
FAILED (remote: reproduce boot image with on-flash ramdisk error)
finished. total time: 946.656s
Is this a good sign?
Plus how do you install drivers
dannyzat said:
ok so i just did this recently:C:\Documents and Settings\Jamal\Android>fastboot boot rom.zip
creating boot image...
creating boot image - 468381696 bytes
downloading 'boot.img'...
OKAY [946.172s]
booting...
FAILED (remote: reproduce boot image with on-flash ramdisk error)
finished. total time: 946.656s
Is this a good sign?
Plus how do you install drivers
Click to expand...
Click to collapse
download HTC sync make sure you read the steps right on that link and make you flash the recovery and download the Rom and push it
thank you all for helping me out
How do I get access to unmounting my sdcard cause it keeps having errors when I try to mount it in clockwork mod recoverybut still having errors
PS. Ek07 how do I use the HTC sync manager on my phone do I go to fastboot or clockwork
I am running CM10.1, and wanted to upgrade to the new nightlies, Upon trying to get into recovery, I cannot use goo manager to installed recovery nor reboot to recovery. I did then try to push TWRP to my device using fastboot, that did not seem to work as any time i rebooted to recovery it would do a normal reboot. I can access fastboot, however when I volume up on "RCK" the following error comes up
Key driver not found..Booting OS
Android cardhu-user bootloader <1.00 e> released by "US_epad-10.6.1.14.4-20130329" A03
Starting Fastboot USB Download protocol
Booting Recovery kernel image
Booting Failed
Unrecoverable bootloader error (0x00000000).
I do not know if I have everything loaded into my PC correct, drivers, etc. Anyone who can help would be greatly appreciated.
As i am now I can run CM 10.1 just fine, booting and everything, I just cannot get into recovery to upgrade or change roms.
ffalzone23 said:
I am running CM10.1, and wanted to upgrade to the new nightlies, Upon trying to get into recovery, I cannot use goo manager to installed recovery nor reboot to recovery. I did then try to push TWRP to my device using fastboot, that did not seem to work as any time i rebooted to recovery it would do a normal reboot. I can access fastboot, however when I volume up on "RCK" the following error comes up
Key driver not found..Booting OS
Android cardhu-user bootloader <1.00 e> released by "US_epad-10.6.1.14.4-20130329" A03
Starting Fastboot USB Download protocol
Booting Recovery kernel image
Booting Failed
Unrecoverable bootloader error (0x00000000).
I do not know if I have everything loaded into my PC correct, drivers, etc. Anyone who can help would be greatly appreciated.
As i am now I can run CM 10.1 just fine, booting and everything, I just cannot get into recovery to upgrade or change roms.
Click to expand...
Click to collapse
I don't know if this method will work on CM. You can give it a shot and report back.
1. Download the Asus firmware from Asus website and extract it once because there is anotherr zip in it.
2. Copy the second zip file to your root directory on your internal sd and reboot
3. If it works, you should see the notification on the lower right corner and click on it. You just follow the instruction to put your device back to the factory bootloader.
Before you use this method, you need to move all your stuff to your computer as a back up because it will wipe everything that you have on your device..
There is another method that you could try if it does not work.. Good luck..:fingers-crossed:
I tried to download the US Firmware from the ASUS site, put it on the root of the internal, then rebooted. Did not see any notification
What is this other method you speak of....
This isn't a huge deal, if I'm stuck on a RC of CM 10.1 I can deal with it. I just like to be up to date and like to reconfigure my tablets and phones from time to time.
On a side note, isn't rom/recovery etc tasks with this tablet very difficult when compared to other tablets/phones?
ffalzone23 said:
I tried to download the US Firmware from the ASUS site, put it on the root of the internal, then rebooted. Did not see any notification
What is this other method you speak of....
This isn't a huge deal, if I'm stuck on a RC of CM 10.1 I can deal with it. I just like to be up to date and like to reconfigure my tablets and phones from time to time.
On a side note, isn't rom/recovery etc tasks with this tablet very difficult when compared to other tablets/phones?
Click to expand...
Click to collapse
Did you unzip it once? You need to have a different firmware version than the one on your system... I will find the other method and link for you..
Thanks Man. I appreciate the help!
ffalzone23 said:
Thanks Man. I appreciate the help!
Click to expand...
Click to collapse
I am still looking for the link. I forgot what it is called... I will post the link here when I find it..
LetMeKnow, Thanks for the update.
Myp hone is a Droid Razr HD, and I know with that phone its possible through the bootloader to flash stock firmwear, is this possible at all with the Transformer tf700t? It would be great to have a simple tool to aid us in getting back to stock to start from square one!
ffalzone23 said:
LetMeKnow, Thanks for the update.
Myp hone is a Droid Razr HD, and I know with that phone its possible through the bootloader to flash stock firmwear, is this possible at all with the Transformer tf700t? It would be great to have a simple tool to aid us in getting back to stock to start from square one!
Click to expand...
Click to collapse
By reading your post again, let me summarize it here. You know how to use fastboot, can't boot to your custom recovery (TWRP), want to flash stock recovery to fix your problem, and have try a few methods to put the stock back but it did not work. You still can get to your bootloader menu. Can you try to use this command to see if you can access to your custom recovery: fastboot boot-recovery
Good luck and get back to you on the link...
this is what came up in command prompt....
C:\android-sdk\platform-tools>fastboot boot-recovery
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot + recovery + system
flash <partition> [ <filename> ] write a file to a flash partition
erase <partition> erase a flash partition
format <partition> format a flash partition
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
devices list all connected devices
continue continue with autoboot
reboot reboot device normally
reboot-bootloader reboot device into bootloader
help show this help message
options:
-w erase userdata and cache (and format
if supported by partition type)
-u do not first erase partition before
formatting
-s <specific device> specify device serial number
or path to device port
-l with "devices", lists device paths
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address.
default: 0x10000000
-n <page size> specify the nand page size. default:
2048
-S <size>[K|M|G] automatically sparse files greater th
an
size. 0 to disable
I then did try below. but when I went to reboot, it just stayed in fastboot, so that leads me to believe there is some error there, either my bootloader is screwy or something related. I appreciate your help. At this point if anything can get me back to stock as bought, I dont care if its older versions of the firmware/bootloader/stock recovery, I'll take it from there.
C:\android-sdk\platform-tools>fastboot -i 0x0B05 flash recovery recovery-jb.img
sending 'recovery' (7746 KB)...
OKAY [ 3.606s]
writing 'recovery'...
OKAY [ 2.414s]
finished. total time: 6.022s
C:\android-sdk\platform-tools>fastboot -i 0x0B05 reboot
rebooting...
finished. total time: 0.548s
C:\android-sdk\platform-tools>fastboot reboot
rebooting...
finished. total time: 0.549s
C:\android-sdk\platform-tools>fastboot reboot-bootloader
rebooting into bootloader...
FAILED (command write failed (Unknown error))
finished. total time: 0.636s
ffalzone23 said:
I then did try below. but when I went to reboot, it just stayed in fastboot, so that leads me to believe there is some error there, either my bootloader is screwy or something related. I appreciate your help. At this point if anything can get me back to stock as bought, I dont care if its older versions of the firmware/bootloader/stock recovery, I'll take it from there.
C:\android-sdk\platform-tools>fastboot -i 0x0B05 flash recovery recovery-jb.img
sending 'recovery' (7746 KB)...
OKAY [ 3.606s]
writing 'recovery'...
OKAY [ 2.414s]
finished. total time: 6.022s
C:\android-sdk\platform-tools>fastboot -i 0x0B05 reboot
rebooting...
finished. total time: 0.548s
C:\android-sdk\platform-tools>fastboot reboot
rebooting...
finished. total time: 0.549s
C:\android-sdk\platform-tools>fastboot reboot-bootloader
rebooting into bootloader...
FAILED (command write failed (Unknown error))
finished. total time: 0.636s
Click to expand...
Click to collapse
I have not seen that before, so I don't know what to say...
When I did fastboot TWRP recovery, I used blob file instead of img file. Do you want to download the blob file and try again?
Edit: What version of TWRP did you fastboot? V2.6.3.0 is larger than our partition on the tf700. Therefore, you can not use it..
The .IMG was cwm recovery. I tried that after trying twrp most recent version. 2.6.3.1 I think.
Sent from my XT926 using xda app-developers app
On a side note, when i fastboot the TWRP file to my device, the green blinking box stopped around "RCK" after that when i type in fastboot reboot to reboot the system, nothing happens. any thoughts?
At this point in time, if there is a way to force stock recovery through fastboot or the stock firmware as well, i'd like to give that a try.
ffalzone23 said:
On a side note, when i fastboot the TWRP file to my device, the green blinking box stopped around "RCK" after that when i type in fastboot reboot to reboot the system, nothing happens. any thoughts?
At this point in time, if there is a way to force stock recovery through fastboot or the stock firmware as well, i'd like to give that a try.
Click to expand...
Click to collapse
If fastboot doesn't work for you but you have a rooted Android, you can try installing a recovery using the dd method:
Code:
cd wherever/you/downloaded/twrp
su
dd if=openrecovery-twrp-2.6.3.1-tf700t.blob of=/dev/block/mmcblk0p4
then reboot - the bootloader should flash your new recovery with a blue progress bar and reboot again. On the second reboot, hold down volume-down to get to the bootloader menu and try entering RCK again.
ffalzone23 said:
On a side note, when i fastboot the TWRP file to my device, the green blinking box stopped around "RCK" after that when i type in fastboot reboot to reboot the system, nothing happens. any thoughts?
At this point in time, if there is a way to force stock recovery through fastboot or the stock firmware as well, i'd like to give that a try.
Click to expand...
Click to collapse
You can try _that method. He always have good advices and know what he is talking about.....:good:
Good luck....
_that. What screen do I have my tablet on when I run the dd command prompt ?
Sent from my ASUS Transformer Pad TF700T using XDA Premium HD app
ffalzone23 said:
_that. What screen do I have my tablet on when I run the dd command prompt ?
Click to expand...
Click to collapse
You mean the expected output? Something similar to:
Code:
15836+1 records in
15836+1 records out
8108136 bytes (8.1 MB) copied, 0.152395 s, 53.2 MB/s
(the above is from my PC - the TF700 is slower)
Or do you mean where you enter those commands? Either via your PC in an adb shell (in this case you must first transfer the file to the TF700 with adb push or other means), or directly on your tablet with a terminal app under Android (I recommend the one from jackpal, search the Play Store)
I was able to get the same output, however when I rebooted after running the last dd code, it did not do anything, just rebooted as normal.
ffalzone23 said:
I was able to get the same output, however when I rebooted after running the last dd code, it did not do anything, just rebooted as normal.
Click to expand...
Click to collapse
What is the response when you use power and volume down buttons?
It takes me into fastboot or boot loader screen w the rck, android cold boot, and wipe data icons
My tf 700t is stop in a restarting loop until the battery is finished.... i have tried booting into recovery but the logo of the recovery TwRP apear and the tablet restarts itself to that point ,until the battery is dead.
Any sugestions?
the tablet is rooted and i was on KatKiss rom on the moment of the crash for about 5 months.
Try this:
http://www.transformerforums.com/fo...my-transformer-tf700-boots-only-recovery.html
Sent from my Nexus 5X using Tapatalk
I'm having the exact same issue.
I can occasionally get into the bootloader, but when I try to get into TWRP it will show the logo page and will immediately restarts.
Following the link you sent, I tried the adb devices prompt, but it showed up blank. Do I need to be in TWRP for adb to work? When I try to get into TWRP it just restarts.
Not sure what my options are when the only screen I can get into is the fastboot.
wldtravel26 said:
I'm having the exact same issue.
I can occasionally get into the bootloader, but when I try to get into TWRP it will show the logo page and will immediately restarts.
Following the link you sent, I tried the adb devices prompt, but it showed up blank. Do I need to be in TWRP for adb to work? When I try to get into TWRP it just restarts.
Not sure what my options are when the only screen I can get into is the fastboot.
Click to expand...
Click to collapse
If you can get into fastboot yours is a very different situation. But let me answer your questions first.
The linked method works if you have adb access in TWRP - however briely. Even if TWRP loops you should have adb access at some point (open Device Manager and watch for changes).
If TWRP is just bootlooping very quickly you may be out of luck but I have seen cases where a little window of adb access and careful timing of the commands let people push the file to internal and insmod it. But that depends on the nature of the bootloop, the skill of the user and persistence.
Now, if you have fastboot access you don't need any of that. In fastboot you have a pretty powerful tool to wipe and format partitions, flash the Asus blob if all fails, but you quite a few options....
If you can get "only occasionally" into the bootloader I would not wait much longer but perform a full wipe of the major partitions and flash the Asus system blob, returning the tablet to stock basically and giving you a fresh start.
We call it a @Buster99
Download the latest Asus firmware from here: https://www.asus.com/support/Download/28/1/0/11/fq2B3oq64av1O95u/8/
Extract it twice and copy the blob into your fastboot directory.
Issue these commands in fastboot one by one:
fastboot erase system
fastboot erase recovery
fastboot erase userdata
fastboot erase boot
fastboot erase misc
fastboot erase cache
fastboot -i 0x0B05 flash system blob
fastboot -i 0x0B05 reboot
Good luck!
Thanks Berndblb. I downloaded the Asus firmware and was able to get the blob file.
But I'm fine with totally starting over and trying Buster99, but I'm still unable to get the ADB to see the device.
I've gone through the beginners guide to root and flashing a custom rom again, but I still can't see the device when I type in "fastboot devices".
If you have any advice or a guide on what I need to do get where I can use ADB to erase everything and start over again.
i cant do anything the tablet starts - shows asus logo-go to TWRP logo screen - restarts (all in 32 seconds). Any other sugestion? if i dismantle the tablet ? or anithing else?
Thank You
wldtravel26 said:
Thanks Berndblb. I downloaded the Asus firmware and was able to get the blob file.
But I'm fine with totally starting over and trying Buster99, but I'm still unable to get the ADB to see the device.
I've gone through the beginners guide to root and flashing a custom rom again, but I still can't see the device when I type in "fastboot devices".
If you have any advice or a guide on what I need to do get where I can use ADB to erase everything and start over again.
Click to expand...
Click to collapse
Either you do not have the correct driver installed or your usb cable is not original but a cheap "charge only" knockoff or try a different usb port or you are not open the cmd prompt from the fastboot directory or your usb port is busted.....
I don't know how to troubleshoot that from here....
Please search the TF700 forum or google "fastboot driver problems". That problem is so common, I really do not know what to add to advice that's out there a hundred times over....
---------- Post added at 04:29 PM ---------- Previous post was at 04:25 PM ----------
mallasorte2000 said:
i cant do anything the tablet starts - shows asus logo-go to TWRP logo screen - restarts (all in 32 seconds). Any other sugestion? if i dismantle the tablet ? or anithing else?
Thank You
Click to expand...
Click to collapse
You can always install a new r used mainboard, but that's the only reason to open it up....
Sorry man, if you do not have adb while the recovery is looping or starting up and you cannot get into fastboot, there's nothing you can do.....
Except for the really crazy and desperate "throw away reason" stuff of course. Like stuffing the tablet into the freezer in an airtight bag for 30 min, then try to boot it......
Thanks Berndblb, I was able to get through the Buster 99 instructions above.
Per the last step I would have expected the tablet to reboot, but that did not happen.
When I restarted it I got the following error when I tried to load Andriod "unrecoverable bootloader error".
I used the following file from the Asus website US_epaduser10_6_1_14_10_UpdateLauncher, based on the fact that my bootloader shows the tablet as "US_epad-10.6.1.14.10-20130801". Hopefully I used the right file for the blob file.
I've attached what I have from adb for the system flash blob and reboot. I tried to screen shoot it in a better format, but that didn't work.
Hopefully someone will be able to take a look and direct me in the right way to get this working again.
C:\adb>fastboot devices
015d2a5086641a19 fastboot
C:\adb>fastboot - i 0x0B05 flash system blob
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot, system, vendor and if fou
nd,
recovery
flash <partition> [ <filename> ] write a file to a flash partition
flashing lock locks the device. Prevents flashing
partitions
flashing unlock unlocks the device. Allows user to
flash any partition except the ones
that are related to bootloader
flashing lock_critical Prevents flashing bootloader related
partitions
flashing unlock_critical Enables flashing bootloader related
partitions
flashing get_unlock_ability Queries bootloader to see if the
device is unlocked
erase <partition> erase a flash partition
format[:[<fs type>][:[<size>]] <partition> format a flash partition.
Can override the fs type and/or
size the bootloader reports.
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
devices list all connected devices
continue continue with autoboot
reboot [bootloader] reboot device, optionally into bootlo
ader
reboot-bootloader reboot device into bootloader
help show this help message
options:
-w erase userdata and cache (and format
if supported by partition type)
-u do not first erase partition before
formatting
-s <specific device> specify device serial number
or path to device port
-l with "devices", lists device paths
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address.
default: 0x10000000
-n <page size> specify the nand page size.
default: 2048
-S <size>[K|M|G] automatically sparse files greater
than size. 0 to disable
C:\adb>fastboot - i 0x0b05 reboot
usage: fastboot [ <option> ] <command>
commands:
update <filename> reflash device from update.zip
flashall flash boot, system, vendor and if fou
nd,
recovery
flash <partition> [ <filename> ] write a file to a flash partition
flashing lock locks the device. Prevents flashing
partitions
flashing unlock unlocks the device. Allows user to
flash any partition except the ones
that are related to bootloader
flashing lock_critical Prevents flashing bootloader related
partitions
flashing unlock_critical Enables flashing bootloader related
partitions
flashing get_unlock_ability Queries bootloader to see if the
device is unlocked
erase <partition> erase a flash partition
format[:[<fs type>][:[<size>]] <partition> format a flash partition.
Can override the fs type and/or
size the bootloader reports.
getvar <variable> display a bootloader variable
boot <kernel> [ <ramdisk> ] download and boot kernel
flash:raw boot <kernel> [ <ramdisk> ] create bootimage and flash it
devices list all connected devices
continue continue with autoboot
reboot [bootloader] reboot device, optionally into bootlo
ader
reboot-bootloader reboot device into bootloader
help show this help message
options:
-w erase userdata and cache (and format
if supported by partition type)
-u do not first erase partition before
formatting
-s <specific device> specify device serial number
or path to device port
-l with "devices", lists device paths
-p <product> specify product name
-c <cmdline> override kernel commandline
-i <vendor id> specify a custom USB vendor id
-b <base_addr> specify a custom kernel base address.
default: 0x10000000
-n <page size> specify the nand page size.
default: 2048
-S <size>[K|M|G] automatically sparse files greater
than size. 0 to disable
wldtravel26 said:
Thanks Berndblb, I was able to get through the Buster 99 instructions above.
Per the last step I would have expected the tablet to reboot, but that did not happen.
When I restarted it I got the following error when I tried to load Andriod "unrecoverable bootloader error".
I used the following file from the Asus website US_epaduser10_6_1_14_10_UpdateLauncher, based on the fact that my bootloader shows the tablet as "US_epad-10.6.1.14.10-20130801". Hopefully I used the right file for the blob file.
I've attached what I have from adb for the system flash blob and reboot. I tried to screen shoot it in a better format, but that didn't work.
Hopefully someone will be able to take a look and direct me in the right way to get this working again.
Click to expand...
Click to collapse
You used the correct file but I see a mistake in your command.
You put a space between the dash and the "i" in your command: fastboot - i 0x0B05 which is a command fastboot does not understand so it shows you the help file so to speak.
It is supposed to be fastboot -i 0x0B05.
See the difference?
Try it again and welcome to the world of the command line
A thousand thanks Berndblb. I was able to get it flashed and it back to the original firmware. Thought for a while, it was a total loss, so your advise was a big help.
On another note, I was having this issue with multiple custom roms, which leads me to believe it a hardware issue.
If I press on the screen too hard or lift it in a different angle, it will freeze up and try to reboot.
I was just able to get past the initial setup, but once I lifted the tablet up again, it did the same thing and froze.
I had basically been stuck, just using the tablet for strictly steaming purposes and leaving in on a table.
If anyone has had similar issues or has any insight let me know.
My wife is asking for a new Ipad if we can't get it to work properly, I'm still trying to convince her to stick with Android but this tablet isn't helping my case.
wldtravel26 said:
A thousand thanks Berndblb. I was able to get it flashed and it back to the original firmware. Thought for a while, it was a total loss, so your advise was a big help.
On another note, I was having this issue with multiple custom roms, which leads me to believe it a hardware issue.
If I press on the screen too hard or lift it in a different angle, it will freeze up and try to reboot.
I was just able to get past the initial setup, but once I lifted the tablet up again, it did the same thing and froze.
I had basically been stuck, just using the tablet for strictly steaming purposes and leaving in on a table.
If anyone has had similar issues or has any insight let me know.
My wife is asking for a new Ipad if we can't get it to work properly, I'm still trying to convince her to stick with Android but this tablet isn't helping my case.
Click to expand...
Click to collapse
damn i feel so used
grats on getting it to work again.
in regard to the troubles you are still having: is it in the Keydock or without, also a possibility that the display has an issue with the digitizer and shortens out.
cheers
Buster
I typically use it without the dock. Haven't put it in the dock in a while. Yea I was thinking the same thing where maybe something is loose inside.
Short of changing out the whole digitizer, do you know of any trouble shooting I can do if I open it up? If it keeps doing this, the tablet itself isn't worth using often. I did have a gumdrop case on it most of the time. I've got a toddler, so wanted maximum protection for it. Maybe it overheated or something?
Check out some tear down videos on YouTube and iFixit, then open it up and check all connectors you can get your hands or tools on. It does sound as if you gave a connection shorting out.
Sent from my Nexus 5X using Tapatalk
berndblb said:
If you can get into fastboot yours is a very different situation. But let me answer your questions first.
The linked method works if you have adb access in TWRP - however briely. Even if TWRP loops you should have adb access at some point (open Device Manager and watch for changes).
If TWRP is just bootlooping very quickly you may be out of luck but I have seen cases where a little window of adb access and careful timing of the commands let people push the file to internal and insmod it. But that depends on the nature of the bootloop, the skill of the user and persistence.
Now, if you have fastboot access you don't need any of that. In fastboot you have a pretty powerful tool to wipe and format partitions, flash the Asus blob if all fails, but you quite a few options....
If you can get "only occasionally" into the bootloader I would not wait much longer but perform a full wipe of the major partitions and flash the Asus system blob, returning the tablet to stock basically and giving you a fresh start.
We call it a @Buster99
Download the latest Asus firmware from here: https://www.asus.com/support/Download/28/1/0/11/fq2B3oq64av1O95u/8/
Extract it twice and copy the blob into your fastboot directory.
Issue these commands in fastboot one by one:
fastboot erase system
fastboot erase recovery
fastboot erase userdata
fastboot erase boot
fastboot erase misc
fastboot erase cache
fastboot -i 0x0B05 flash system blob
fastboot -i 0x0B05 reboot
Good luck!
Click to expand...
Click to collapse
I also got into a bootloop situation and was unable to connect via adb (adb usb gave me "error: device not found") but fastboot was ok. So I tried the @Buster99 rescue. Unfortunately it failed at the flash system blob step. It gave "FAILED (data transfer failure (unknown error))...".
It's been too long since I used adb and fastboot. Lately my TF700T had become erratic, unstable and experiencing sudden reboots so I wanted to format data and do clean re-install of KatshMallow #29. I also had discovered that the digitizer had developed a blind-spot, actually more of a whole blind column of about a quarter inch wide, giving me problems swiping a TWRP button to unlock the screen. So, I went to change TWRP's screen timeout setting (TWRP 2.8.4.0 Kang) to max when suddenly it rebooted into a system bootloop. Going to TWRP would go to bootloop again at the TWRP splash screen.
Alas, I must have forgotten to set the USB debug mode after the last flashing as I am now locked out of adb. That's how I got into this unfortunate situation.
Any ideas, short of replacing TF700T's mb? Looks like this is the end of a long journey with my TF700T! :crying:
Kraka said:
I also got into a bootloop situation and was unable to connect via adb (adb usb gave me "error: device not found") but fastboot was ok. So I tried the @Buster99 rescue. Unfortunately it failed at the flash system blob step. It gave "FAILED (data transfer failure (unknown error))...".
It's been too long since I used adb and fastboot. Lately my TF700T had become erratic, unstable and experiencing sudden reboots so I wanted to format data and do clean re-install of KatshMallow #29. I also had discovered that the digitizer had developed a blind-spot, actually more of a whole blind column of about a quarter inch wide, giving me problems swiping a TWRP button to unlock the screen. So, I went to change TWRP's screen timeout setting (TWRP 2.8.4.0 Kang) to max when suddenly it rebooted into a system bootloop. Going to TWRP would go to bootloop again at the TWRP splash screen.
Alas, I must have forgotten to set the USB debug mode after the last flashing as I am now locked out of adb. That's how I got into this unfortunate situation.
Any ideas, short of replacing TF700T's mb? Looks like this is the end of a long journey with my TF700T! :crying:
Click to expand...
Click to collapse
Did you ever get it fixed? I'm in the same situation. Can't enter recovery or fastboot. Well, I entered fastboot once, chose recovery, now it boot loops straight to recovery. This sucks. Tablet worked fine for months.
If you can't boot into fastboot and you do not have adb access when in recovery, you're done. Nothing left to do.
You did not mention if you are unlocked. With a locked bootloader you can't do anything even if you have adb in recovery or if you could boot to fastboot. Sorry
It is unlocked and rooted. I see something showing up in Device Manager, only it says Google Nexus ADB interface. I can also enter the other mode with Power and Vol Up. This mode holds, however, not sure if I can do much from there.
Now I got TWRP screen stuck, so at least it's not looping. But adb commands don't produce any effect.
xxhaimbondxx said:
It is unlocked and rooted. I see something showing up in Device Manager, only it says Google Nexus ADB interface. I can also enter the other mode with Power and Vol Up. This mode holds, however, not sure if I can do much from there.
Click to expand...
Click to collapse
What do you mean? APX? No, that does not help you
xxhaimbondxx said:
Now I got TWRP screen stuck, so at least it's not looping. But adb commands don't produce any effect.
Click to expand...
Click to collapse
With TWRP booted, do you see the adb recovery interface in device manager and what do you get with "adb devices"? Do you have the drivers installed?
berndblb said:
With TWRP booted, do you see the adb recovery interface in device manager and what do you get with "adb devices"? Do you have the drivers installed?
Click to expand...
Click to collapse
This is the only thing I see in Device Manager: Google Nexus ADB interface. I installed the Universal Drivers.
When I type adb devices, I get nothing.
Well, this one time I got this:
adb devices
List of devices attached
* daemon not running. starting it now on port 5037 *
* daemon started successfully *
Hello, friends. So I am here following this exact tutorial :
How to Restore OnePlus Nord Back to Stock OxygenOS Software - A Complete Guide
In this guide, we will show you how to restore the stock OxygenOS software on the OnePlus Nord by flashing the factory image/Fastboot ROM. Things like custom ROMs, TWRP, and Magisk root are pretty…
www.thecustomdroid.com
I currently am stuck there
@pop-os:~/Desktop/platform-tools_r31.0.2-linux/platform-tools/Partition-image$ fastboot flash abl abl.img
target reported max download size of 805306368 bytes
sending 'abl' (1996 KB)...
OKAY [ 0.055s]
writing 'abl'...
FAILED (remote: Flashing is not allowed for Critical Partitions
)
finished. total time: 0.057s
@pop-os:~/Desktop/platform-tools_r31.0.2-linux/platform-tools/Partition-image$ fastboot flashing unlock_critical
...
FAILED (remote: Device already : unlocked!)
finished. total time: 0.000s
@pop-os:~/Desktop/platform-tools_r31.0.2-linux/platform-tools/Partition-image$ fastboot flashing unlock
...
FAILED (remote: Device already : unlocked!)
finished. total time: 0.000s
Click to expand...
Click to collapse
I just simply do not understand what could be wrong here.
In fastoot mode I get "device - State unlocked"
As you already saw, it seems the device is completely unlocked. What could be wrong ?
Also, some steps before, I get that :
@pop-os:~/Desktop/platform-tools_r31.0.2-linux/platform-tools/Partition-image$ fastboot reboot fastboot
fastboot: usage: unknown reboot target fastboot
Click to expand...
Click to collapse
I suspect switching to the automated in Windows won't change much.
It is strange because I am able to perform these steps without problems, ones the ones after seem to not work :
./fastboot flash boot boot.img
./fastboot flash dtbo dtbo.img
./fastboot flash modem modem.img
./fastboot flash recovery recovery.img
./fastboot --disable-verity flash vbmeta vbmeta.img
./fastboot --disable-verity flash vbmeta_system vbmeta_system.img
Click to expand...
Click to collapse
I might be doing something wrong ? Be located in the wrong folder or something ? For instance, when I type these commands it does not work if I write the "./" before fastboot, it tells me
@pop-os:~/Desktop/platform-tools_r31.0.2-linux/platform-tools/Partition-image$ ./fastboot flash boot boot.img
bash: ./fastboot: No such file or directory
Click to expand...
Click to collapse
My phone is a Oneplus Nord and I am using the advised Oxygen OS ROM provided in the tutorial I linked at the beginning of my message.
I hope you'll be able to get me out of this as I unfortunately can't figure out how to solve this problem on my own.
Best regards
krakard said:
I might be doing something wrong ? Be located in the wrong folder or something ? For instance, when I type these commands it does not work if I write the "./" before fastboot, it tells me
@pop-os:~/Desktop/platform-tools_r31.0.2-linux/platform-tools/Partition-image$ ./fastboot flash boot boot.img
bash: ./fastboot: No such file or directory
Click to expand...
Click to collapse
Yes, that makes sense.
Fastboot should be located at /usr/bin/fastboot. Since you're not in that directory, ./fastboot won't work. (This ./ means: "Look at the current working directory for the command fastboot." If it cannot find fastboot there or it isn't a shell command, it will throw an error.)
However, since you didn't install fastboot globaly, you have to address its exact path inside your platform-tools folder. If fastboot is not in Partition-image folder, ./ won't work.
Can't help you with your main issue though.
Edit: You seem to have fastboot installed globally though:
@pop-os:~/Desktop/platform-tools_r31.0.2-linux/platform-tools/Partition-image$ fastboot reboot fastboot
fastboot: usage: unknown reboot target fastboot
Click to expand...
Click to collapse
So my first explaination is valid.
Thank you for clarifying that. I understand the issue there. Which is a non-issue indeed since I already installed it globally. But well, it at least teaches me how Linux work.
Of course however, the main issue remains that's for sure.
krakard said:
Thank you for clarifying that. I understand the issue there. Which is a non-issue indeed since I already installed it globally. But well, it at least teaches me how Linux work.
Of course however, the main issue remains that's for sure.
Click to expand...
Click to collapse
You're welcome.
BTW:
krakard said:
@pop-os:~/Desktop/platform-tools_r31.0.2-linux/platform-tools/Partition-image$ fastboot reboot fastboot
fastboot: usage: unknown reboot target fastboot
Click to expand...
Click to collapse
There is no "fastboot" to boot into. Instead, type
Code:
fastboot reboot bootloader
I didn't mention that yesterday for some reason.
Guys, here is where I am at now. Still struggling but I feel I am very near ! Some help maybe ?
https://forum.xda-developers.com/t/...your-device-to-oxygenos.4148415/post-85022511
best regards
SOLVED
krakard said:
SOLVED
Click to expand...
Click to collapse
How did you fixed this? I'm currently stuck at the same point as you with a oneplus 8
Same here, how did you managed to solve the "Flashing is not allowed for Critical Partitions: error with the fastboot ROM batch file?
mbootsman1 said:
Same here, how did you managed to solve the "Flashing is not allowed for Critical Partitions: error with the fastboot ROM batch file?
Click to expand...
Click to collapse
I found the solution, you have to do fastboot reboot fastboot which reboots you to fastbootd instead of fastboot. There you can flash critical partitions without issue.
Hi,
As the command recommanded everywhere :
Code:
fastboot flashing unlock_critical
had never worked for me in the bootloader environment,
I have to reboot i my rom embedded recovery in order to flash the file (apply update menu) through the :
fastbootD
To sum up :
#From Android (while having all prerequisite done ie bootloader unlocked...)
Code:
adb reboot bootloader
#From the bootloader I choose to boot to recovery and I get to the rom custom recovery
#In the custom recovery, I choose the menu "apply update" that will lead me to the fastbootD mode
#I type the appropriate command to flash the persist partition
Code:
fastboot flash persist "c:\your_path_to_your_persist_file\persist.img"
#Then I simply reboot the phone
Code:
fastboot reboot
PS : Initially flash the OxygenOS (OOS) 11, then apply the CRdroid Android v8 custom rom (based on Android 12)
I did it similar like solid-snake:
In my case I also had no access to fastbootD
The solution came randomly when I flashed back the first part from my lineageOS package:dtbo.img, vbmeta.img and the recovery.img --> after that my phone naturally booted in a fastbootD mode from the lineageOS package.
I modified the flash-all.bat from the stock ROM fastboot flash package:
I removed the line with the reboot command, because I'm already in the fastbootD mode.
Then I ran the modified flash-all.bat and everything went well.
If anyone else struggles (like I did) to get the phone in EDL mode, or the "Flashing is not allowed for Critical Partitions" error ,even if the "fastboot flashing unlock_critical" cmd was executed, here are some hints that might help.
I tried forever on a Linux computer without any luck, so I ended up installing Windows 10 on actual hardware to finally unbrick my One Plus Nord (Avicii). Here are the most important steps, YMMV, execute at own risk:
bcdedit.exe /set nointegritychecks off run this cmd as admin in terminal, toggle to "on"
then install edl drivers as admin, This is where I struggled the most, I finally found an .exe file(QDLoader HS-USB Driver_64bit_Setup.exe) that I just installed and then phone showed up as it should in device manager. ("Qualcomm HS-USB QDLoader 9008," not "QUSB_BULK")
install adb and fastboot. (platform-tools)
install MSM-Download-Tool
download stock OS for use in MSM-Download-Tool program
open msm tool, if phone is not recognised try turning on and holding power pluss both volume, or just one of the volumes.
uncheck the "sha hash check" box
flash
if you get the "Sahara Communication Failed", just try again, it worked for me.
wipe
erase Windows 10 and replace with any Linux distro, tell your PC it will never happen again.
enjoy
Here are link to the EDL-drivers that worked for me. Or just do a web-search for "QDLoader HS-USB Driver_64bit_Setup.exe"
The flashing process will take over 300 seconds, be patient.
We're trying to install a GSI ROM. We get the error FAILED (remote: 'partition table doesn't exist')
We ran
Code:
fastboot getvar all
and see all of the partition tables listed or at least most of them. We do not see a system partition listed.
Why would this be? If I create one, how would I do that? How would I get the correct size? I'm assuming
Code:
fastboot create-logical-partition [NAME SIZE]
?
Does anyone know if I cannot boot into fastbootd and only boot into fastboot, am I still able to create a partition? It seems this device is boot looped. I haven't been able to boot into recovery. I can only get fastboot and EDL modes. Stock firmware is not available.
Starting with Android 10 fastboot got moved to Android's user-space, what requires this pair of commands
Code:
adb reboot fastboot
fastboot reboot fastboot
to get fastboot working.
xXx yYy said:
Starting with Android 10 fastboot got moved to Android's user-space, what requires this pair of commands
Code:
adb reboot fastboot
fastboot reboot fastboot
to get fastboot working.
Click to expand...
Click to collapse
Thank you for the reply. I do understand that part, however I cannot get into adb. If it is stuck in a bootloop, how can I access adb?
The bootloader is unlocked and oem debugging is on. It is a Moxee M2160 MH-T6000 Qualcomm QM215. We cannot find any stock firmware for it.