[Q] Need help, bricked GS4 m919. - General Questions and Answers

Hi, I flashed CM 10.2 on my Galaxy S4, and I used titanium backup to restore all my apps, only apps I didn't choose was TouchWiz and the TouchWiz simpler one. And it said I needed to reboot my device for the changes to apply, so I did that. When I rebooted it said everything stopped working. Even the core thing. Screen went black. Then I took out the battery and when I tried to go to my custom recovery, it just skipped the recovery screen and booted into cm again and same thing happened. Everything just stopped working. Help please. Also I am able to get into download mode. I just don't know how to recover from this. I am running 4.3.1 cm nightly, well I was. I don't know if I could count it was 4.3 I am still really new and I just want to reset my phone so I can actually use it. I hope I did not hard brick it. I'm on the verge of crying.

Try using Samsung kies to recovery your device? I'm not familiar with Samsung devices but try it and see where it goes.
Sent from this toast making Nexus 5, you wish your Nexus could make toast don't you? (;

Duplicate post. Please refer to the original post for further discussion: http://forum.xda-developers.com/showthread.php?p=51073143#post51073143
Thanks!

Related

[Q] Help, i think i ruined my phone! need serious help

I rooted my phone yesterday and everything went fine. I installed a root app which allows you to change many features in your phone. I decided to see what other resolutions would work. After i changed the resolution my phone rebooted and it f**ked everything up. I cant do anything now. Its all errors. I have no idea what to do now. I need to wipe it clean but dont know how.
Someone please help if you can
Thanks
Samsung Galaxy s 4g
danavpro said:
I rooted my phone yesterday and everything went fine. I installed a root app which allows you to change many features in your phone. I decided to see what other resolutions would work. After i changed the resolution my phone rebooted and it f**ked everything up. I cant do anything now. Its all errors. I have no idea what to do now. I need to wipe it clean but dont know how.
Someone please help if you can
Thanks
Samsung Galaxy s 4g
Click to expand...
Click to collapse
Go to:
http://forum.xda-developers.com/showthread.php?t=1001759
You will likely have to reflash your rom. That will give you one option to bring it back to stock working condition. There may be other solutions. This is just one option.

Please help bricked my rooted optimus s with factory reset...

Hi. I have a huge problem and I am so stressed because some of the people in these forums are awfully mean and I am already having a bad enough time, Plus I have been searching for 3 days and found no working solution. I love my phone and I fear I may just have to give up all hope, but I am just not quite ready to let go....
Seriously tho, I rooted my Optimus S and I had a hell of a time getting a recovery to work finally thunderc did the trick. then I added thundeRom, and I had it about to weeks when I came across this cool ROM called cyanogen nightly so I just had to have it. Well then my phone wouldn't flash into recovery. I tried installing many recoveries none would work.
After so many failed attempts I kept getting permission denied. I remembered that before I rooted I had the same problem and after I did a factory reset and wiped my phone clean it worked, So I did that again and I pretty sure it bricked, only I have not found any other post where the symptoms were just like mine. My phone will only blink LG nothing else.
I did back up with titanium before this and I had a nandroid backup also. Is there any hope? Does anyone know what may have happened with my recovery before this happened? It was working fine. I have not been this long without a phone in at least 10 years. Please help I would greatly appreciate it. thanks.
yes there is, if you could go into clockwork recovery (reflash it without fully turning on the phone, there probably is a way, google it )
then you could reinstall your previous backup and it would work as new.
Sent from my Nexus S using XDA App

Root/Install ROM first time - I think I screwed up.

The basic deal is I got bored of the software and decided that I should root an install some custom ROMs on my Nexus S.
I used the One click method posted I believe in the general forum and everything went smoothly. I downloaded the latest AOKP and CM zips, put them onto my phones memory and went on with my day.
So today I began to put on the AOKP ROM and it got stuck at the initiating swagger screen. And was stuck there for a good 20minutes. I didn't know what to do, so I battery pulled.
I thought I had some backup saved from the day before, but that wasn't the case. So now I'm essentially stuck in thee boot menu for clockwork and my phone has been rendered useless. If any of you guys know what I should do, please tell, I'm extremely pissed off at myself for letting this happen.
I deleted the Cache partition and Dalvik thing when I was first getting ready to put on the ROM. I didn't to a factory wipe, so that might be an issue? I don't know. I've also tried plugging the phone into my computer, but because I cant turn on USB mass storage, I can't look through that either.
Any help would be greatly appreciated. Thanks
Hi,
If ur in the bootloader screen scroll down until u see recovery. Then press the power button.
From recovery scroll down to mounts and storage to connect to computer via USB.
From here u have a few options bjt i would just download another ROM and its gapps or a ROM that already contains them.
Just be careful to get the correct zips for ur type of phone
Good luck
Vs Nexus S4G using tapatalk2
Wow. Thanks a lot. Do you think I should do a factory reset before I install a new rom?
EDIT: Hey vidaljs, thanks for the help! I got the CM10 ROM up and running, apparently I was running some really old version! That USB mount thing really helped!!
Chillingly Based said:
Wow. Thanks a lot. Do you think I should do a factory reset before I install a new rom?
EDIT: Hey vidaljs, thanks for the help! I got the CM10 ROM up and running, apparently I was running some really old version! That USB mount thing really helped!!
Click to expand...
Click to collapse
No worries
Next thing u should do is make a backup of this working ROM so u can always go back to it in a pinch.
And always follow what the developers suggest in their thread since they created it.
But when I go to a new ROM, I always do a factory reset, wipe cache and wipe Dalvic.
If u haven't found it yet, use titanium backup for ur apps so its easier to apply them to ur newly flashed ROM. The free version is fine but I've heard that paid version has some extra useful benefits.
Good luck and happy flashing.
Vs Nexus S4G using tapatalk2
vidaljs said:
No worries
Next thing u should do is make a backup of this working ROM so u can always go back to it in a pinch.
Click to expand...
Click to collapse
Yeah I should have done it first
Hi guys,
Almost same stroy, I tried to Root & install Cyanomodgen 10 on my Nexus S, but boot isn't working quite well, and I'm stuck at a circling image preparing the launch.
Recovery isn't working I got stuck at the image with the robot and the back and the exclamation mark on top of it and like 5 minutes later it launch the cyanomodgen ring again - and can't get in download mode.
I pretty don't get what I should do.
Any idea?
I feel I lack some info on my problem, I'll create a fresh post for it
thanks

[Q] Need Help!

Hi, I just tried flashing cyanogenmod on my us cellular galaxy s3, and I ran into a problem. I followed a great youtube tutorial on how to flash cyanogen, and everything went fine. the tutorial used goomanager, and was done only using the phone, no computer. I flashed the rom after backing everything up through titanium, and everything appeared to be working like it should. After the flash was complete, the cyanogen animation popped up on my screen, but as soon as it finished loading, two messages popped up: setup wizard has stopped and goo.apps has stopped. I would hit okay, but the two messages just kept popping up. I restored my stock rom, but id still like to flash cyanogen and I need to know what I need to do to prevent this from happening again and how to restart the flash process. Any help would be greatly appreciated!
intelligentduck said:
Hi, I just tried flashing cyanogenmod on my us cellular galaxy s3, and I ran into a problem. I followed a great youtube tutorial on how to flash cyanogen, and everything went fine. the tutorial used goomanager, and was done only using the phone, no computer. I flashed the rom after backing everything up through titanium, and everything appeared to be working like it should. After the flash was complete, the cyanogen animation popped up on my screen, but as soon as it finished loading, two messages popped up: setup wizard has stopped and goo.apps has stopped. I would hit okay, but the two messages just kept popping up. I restored my stock rom, but id still like to flash cyanogen and I need to know what I need to do to prevent this from happening again and how to restart the flash process. Any help would be greatly appreciated!
Click to expand...
Click to collapse
before you flashed the rom did you wipe data and cache? you might also be on the nightly version, try looking for the stable version, and if its on 10.1 its on 10.1, theres nothing you can do but wait for it to become stable if it isent already.
Trozzul said:
before you flashed the rom did you wipe data and cache? you might also be on the nightly version, try looking for the stable version, and if its on 10.1 its on 10.1, theres nothing you can do but wait for it to become stable if it isent already.
Click to expand...
Click to collapse
Everything was wiped. what I think happened was when I backed everything up, I didn't set titanium to not restore my app data, causing a bootloop. I could be very wrong about that though. What I need to know is how to reflash it, as I have already tried to but when I do it brings up system recovery instead of reflashing. Is it because I already tried flashing it once? and if that's the case how do I start from scratch? Oh, and I did flash the stable version. it was 10.1.2
intelligentduck said:
Everything was wiped. what I think happened was when I backed everything up, I didn't set titanium to not restore my app data, causing a bootloop. I could be very wrong about that though. What I need to know is how to reflash it, as I have already tried to but when I do it brings up system recovery instead of reflashing. Is it because I already tried flashing it once? and if that's the case how do I start from scratch? Oh, and I did flash the stable version. it was 10.1.2
Click to expand...
Click to collapse
might want to try flashing a stock rom via odin cause it sounds like you have stock recovery now, i dont know if anyone will pick you up in the q&a section, since yours is us cellular i dont think they have a forum for that specific contractor just only t-mobile at&t and verizon would have one. you can ask them in their q&a but tell them your situation and that your on us cellular. good luck mate. if ya have any questions just ask right here.

[Q] I really need help, bricked tmobile GS4

Hi, I flashed CM 10.2 on my Galaxy S4, and I used titanium backup to restore all my apps, only apps I didn't choose was TouchWiz and the TouchWiz simpler one. And it said I needed to reboot my device for the changes to apply, so I did that. When I rebooted it said everything stopped working. Even the core thing. Screen went black. Then I took out the battery and when I tried to go to my custom recovery, it just skipped the recovery screen and booted into cm again and same thing happened. Everything just stopped working. Help please. Also I am able to get into download mode. I just don't know how to recover from this. I am running 4.3.1 cm nightly, well I was. I don't know if I could count it was 4.3 I am still really new and I just want to reset my phone so I can actually use it. I hope I did not hard brick it. I'm on the verge of crying.
I just really need some sort of hope. I don't want to spend 600$ again..
If you can get into download mode then restore from a stock rom file using ODIN.
Sent from my Galaxy S4 on Verizon using Tapatalk
Duplicate post. Please refer to the original post for further discussion: http://forum.xda-developers.com/showthread.php?p=51073143#post51073143
Thanks!

Categories

Resources