I think I may have bricked my device, wonder what to do!
I tried installing the slimbean rom for my phone with CWM, and when it gets to loading screen it will just load on the slimbean logo for like 24 hours straight!
I tried opening odin, and installing new rom, etc... Now its just showing up when I start phone that: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.
Not sure what to do, I believe CWM is still on the phone, can't get to it though because of this error.
Anyone got any ideas?! I need this fixed D:
http://forum.xda-developers.com/showthread.php?t=2176593
vincom said:
http://forum.xda-developers.com/showthread.php?t=2176593
Click to expand...
Click to collapse
Thanks, but I couldnt find the answer to my question in there!
LunarSAF said:
Thanks, but I couldnt find the answer to my question in there!
Click to expand...
Click to collapse
18c) Q. I used odin to update my firmware but it failed/received errors
A. goto RESTORING STOCK W/ODIN STICKY and read the odin troubleshooting section.
vincom said:
18c) Q. I used odin to update my firmware but it failed/received errors
A. goto RESTORING STOCK W/ODIN STICKY and read the odin troubleshooting section.
Click to expand...
Click to collapse
Thankyou so much! I am trying this out now!
Related
First off I searched, and have tried everything on forum before you say do a search
My kid bricked her Sidekick 4g
I tried to ODIN about 4 different Tars they all say they pass but it then boots into the Android recovery and says installing some. When i click reboot phone it turns phone .
Everytime i odin it reboots to a recovery. Is there any way I can get this phone to boot back to the original rom?
all the links I have either don't exist any more, or fail. Please advice
716Rob said:
First off I searched, and have tried everything on forum before you say do a search
My kid bricked her Sidekick 4g
I tried to ODIN about 4 different Tars they all say they pass but it then boots into the Android recovery and says installing some. When i click reboot phone it turns phone .
Everytime i odin it reboots to a recovery. Is there any way I can get this phone to boot back to the original rom?
all the links I have either don't exist any more, or fail. Please advice
Click to expand...
Click to collapse
You said you've tried everything -- without attacking you I don't exactly believe this. ODIN isn't the ONLY way to "ODIN" or restore to factory default.
Try this. It's easy to use, fast, and there's tons of support on it. Most people who have had problems like this have solved it with Adam's tool.
http://forum.xda-developers.com/showthread.php?t=1350060
Be sure to thank the OP in that thread if this helps you.
TheLastSidekick said:
You said you've tried everything -- without attacking you I don't exactly believe this. ODIN isn't the ONLY way to "ODIN" or restore to factory default.
Try this. It's easy to use, fast, and there's tons of support on it. Most people who have had problems like this have solved it with Adam's tool.
http://forum.xda-developers.com/showthread.php?t=1350060
Be sure to thank the OP in that thread if this helps you.
Click to expand...
Click to collapse
You can find the download for the link in that OP here:
http://forum.xda-developers.com/showthread.php?p=30763711#post30763711
It seems that Adam's server doesn't have that file anymore.
actually that was my first try however link was dead.. So You better believe me!!!! However the second link works so we shall see..
I actually googled that too and downloaded one but was asking me to download a gz file
Hi there!
I have a Galaxy Tab 7 and I am a noob on this development stufs.
I am trying to install this version on it:
cafe-ti.blog.br/1835~samsung-galaxy-tab-7-gt-p1000-android-jelly-bean-cm10
And looks like the language is pretty simple but I have no clue how to do it...I mean, I trie using Odin..did not work...
I tried this instead:
[wiki.cyanogenmod.com/wiki/Samsung_Galaxy_Tab_(P1000L):_Full_Update_Guide
but the Recovery mode does not work!
There is any step by step non expert language tutorial to how let the Tab 7" with the CM10?
Thanks from Brazil
Rafael
You try this?
http://forum.xda-developers.com/showthread.php?t=1542897
orangekid said:
You try this?
http://forum.xda-developers.com/showthread.php?t=1542897
Click to expand...
Click to collapse
My one is the 7", not the 7'7" and its the GT-P1000L..
It will work on it?
rafapiloto195 said:
My one is the 7", not the 7'7" and its the GT-P1000L..
It will work on it?
Click to expand...
Click to collapse
I tried this video, passin to 2.3.6 first, using Odin..
youtube.com/watch?v=fXDvq5SaA70&feature=relmfu
workd well, however, after flashing, is not turning on again...
What may can be?
Oh yeah don't use the 7.7 forum then...
You Odin flashed a ROM and now the device won't even turn on? Or is it just boot loop?
orangekid said:
Oh yeah don't use the 7.7 forum then...
You Odin flashed a ROM and now the device won't even turn on? Or is it just boot loop?
Click to expand...
Click to collapse
There is no sign...does not even turn on...
black screen only..nothing...
rafapiloto195 said:
There is no sign...does not even turn on...
black screen only..nothing...
Click to expand...
Click to collapse
Can you link the ROM you Odin flashed?
Sounds like you bricked your device...
edit: if you plug it into your computer does anything pop up on the computer?
orangekid said:
Can you link the ROM you Odin flashed?
Sounds like you bricked your device...
edit: if you plug it into your computer does anything pop up on the computer?
Click to expand...
Click to collapse
I had to come to work and let it at home...
Well, as berfore flash it I let the USB on the debugging, I will track the oneclick root directly to se if at least will get a conecction with a computer;
I will try to send it to the dealer as well.
I believe as I let it on the 2.3.6, wich is the same one running on Kies, still under warranty to perform a hard brick recovery.
Let's see.
Thanks..I'll keep you guys posted.
Yeah let us know, hopefully we can do something, not sure why a GB Stock Odin flash would brick it.
orangekid said:
Yeah let us know, hopefully we can do something, not sure why a GB Stock Odin flash would brick it.
Click to expand...
Click to collapse
Just replying to your question, I flash it with the one on the youtube video link I posted:
www.youtube.com/redirect?q=https://...yuzT76vVlfj4vSE98MTM0ODM0OTI1NUAxMzQ4MjYyODU1
rafapiloto195 said:
Just replying to your question, I flash it with the one on the youtube video link I posted:
www.youtube.com/redirect?q=https://...yuzT76vVlfj4vSE98MTM0ODM0OTI1NUAxMzQ4MjYyODU1
Click to expand...
Click to collapse
Well, looks like it is working again,
however, when I try to turn on on the recovery mode to wipe data,
it shows E: MBR Checksum error
Internal MMC checksum verify failed.
Any ideas?
great idea
+1 orangekid
asdera-and said:
+1 orangekid
Click to expand...
Click to collapse
Ok! Is on the 2.3.3 now.
I want to put the Cyanogen 4.1.1 as described here:
http://forum.xda-developers.com/showthread.php?t=1871113
However, when I tried it shows me the error I mentioned above and also
Failed to verify whole-file signature...
Then , I was able to come to CMW where I should install the Cyanoi 4.1.1 however keeps showing me the error:
E: Can't moun /emmc/
Ideas?
OK
now I tried this room:
Rom: Overcome + Overcome Kernel
Following the guide step by step and then the E: looks like to be damaged. I can not even turn it on again.
Just when I put it to charge, it will show the brick scree (the fone and the computer)...
I am almost givin up...
Does your tab have an SD card in it?
If so try a different one, if not odin 100% stock, then do the root, and ROM flash again.
I need the pit file for the Galaxy S 4G ( SGH -T959V ) , because I used a non compatible pit file for my phone and now it is not booting .
please help !!!!
thanks in advance
I solved the issue by downloading the file hawk.zip from this link ( http://sourceforge.net/projects/kc1cleanup/files/hawk.zip/download ) and then flashed it by Odin .
machhho said:
I need the pit file for the Galaxy S 4G ( SGH -T959V ) , because I used a non compatible pit file for my phone and now it is not booting .
please help !!!!
thanks in advance
Click to expand...
Click to collapse
Did you get your device working? If not i know a guide that will help you tremendously. I had the same issue when i first started installing custom roms.
coreya92 said:
Did you get your device working? If not i know a guide that will help you tremendously. I had the same issue when i first started installing custom roms.
Click to expand...
Click to collapse
thanks , I got it working by download the hawk.zip and every thing went back to stock .
This phone is virtually.unbrickable
Sent from my SGH-T959V using xda app-developers app
I could use that guide
coreya92 said:
Did you get your device working? If not i know a guide that will help you tremendously. I had the same issue when i first started installing custom roms.
Click to expand...
Click to collapse
I'm soft bricked I think. I tried several guides but all the links are broken. Right now I can boot into stock recovery and download, but when I boot I just get a loop. Any advice?
Have you tired factory reset? Without knowing which Roms you were coming from and going to. It's hard to say.
Start over. Reflash stock (heimdal or odin... your choice/preference).then go from there. That's my normal routine.
mxc42 said:
I'm soft bricked I think. I tried several guides but all the links are broken. Right now I can boot into stock recovery and download, but when I boot I just get a loop. Any advice?
Click to expand...
Click to collapse
go to this link
http://forum.xda-developers.com/showthread.php?t=1358498
happens once on my phone.. but i learned a lot and it didnt happen again
So I think I screwed up. I tried to put a rom on my wifes S3, and didnt realize I had to mess with odin. So, I installed the latest twrp and liquidsmooth 4.3 rom. Now i'm stuck at the "system software not authorized by verizon" screen. I've tried to odin flash (right terminology?) any of the odin files I can find, but nothing seems to be working.
I've read this thread, but its old, and half of the links arent working correctly.
So, i'm stuck and have no clue what to do next, please help.
fixed it following this guide: http://www.android.gs/fix-bricked-verizon-galaxy-s3/
randyklein said:
fixed it following this guide
Click to expand...
Click to collapse
nice work. May i suggest using cyanogenmod 10.2? It's just as smooth as liquidsmooth rom.
Yup. That is standard message for locked bootloader.
I rooted my s7 A while ago and it was working fine, until I accidentally clicked the update button and now my phone keeps trying to update itself and I can't get back on it. I've been trying to flash stock firmware but it wont let me do that either :/
XxDieguyxX123 said:
I rooted my s7 A while ago and it was working fine, until I accidentally clicked the update button and now my phone keeps trying to update itself and I can't get back on it. I've been trying to flash stock firmware but it wont let me do that either :/
Click to expand...
Click to collapse
Hi
What phone type you have G930F? what you mean " keeps trying to update itself" does it boot?
What happens when you try to flash a stock firmware?
can you get into recovery?
MAX 404 said:
Hi
What phone type you have G930F? what you mean " keeps trying to update itself" does it boot?
What happens when you try to flash a stock firmware?
can you get into recovery?
Click to expand...
Click to collapse
I have the SM-G930A, And When ever I try to go in to recovery it goes to the updating screen and then fails, then tries to boot up and keeps doing the same thing over and over. Also Every time I try to flash stock firmware it fails. idk why it fails tho :crying: Thanks for the help in advanced! :victory:
XxDieguyxX123 said:
I have the SM-G930A, And When ever I try to go in to recovery it goes to the updating screen and then fails, then tries to boot up and keeps doing the same thing over and over. Also Every time I try to flash stock firmware it fails. idk why it fails tho :crying: Thanks for the help in advanced! :victory:
Click to expand...
Click to collapse
Hi mate
First of all you are in the wrong forum , maybe here they could help you out better:
http://forum.xda-developers.com/att-galaxy-s7
Check this threads
http://forum.xda-developers.com/att-galaxy-s7/how-to/xda-community-love-g930u-t3415875
http://forum.xda-developers.com/att-galaxy-s7/how-to/firmware-stock-sm-g930a-pb5-odin-files-t3411468
Good luck
MAX 404 said:
Hi mate
First of all you are in the wrong forum , maybe here they could help you out better:
http://forum.xda-developers.com/att-galaxy-s7
Check this threads
http://forum.xda-developers.com/att-galaxy-s7/how-to/xda-community-love-g930u-t3415875
http://forum.xda-developers.com/att-galaxy-s7/how-to/firmware-stock-sm-g930a-pb5-odin-files-t3411468
Good luck
Click to expand...
Click to collapse
Thanks! The second forum helped me get it! If anyone doesn't wanna look at the forum and is having the same issue just flash everything but the bl!
XxDieguyxX123 said:
Thanks! The second forum helped me get it! If anyone doesn't wanna look at the forum and is having the same issue just flash everything but the bl!
Click to expand...
Click to collapse
Great info , thanks for letting us know.
Do you know why the BL was causing the problem?