Hello Forum! I've come here for a little help! Here's My Story.
After running Cyanogen 10.1 Nightlies on 4.2.2 for quite some time, I decided to do a factory reset because my TF300T seemed to be running a little slugish. I DID NOT back it up (mistake #1), DID NOT have USB Debugging on (mistake #2), and, while CWM was wiping /data, I shut off the tablet (STRIKE THREE). Prior to my bonehead move, I had everything else squared away. The unit was fully functional. Now, I'm stuck in this infernal boot loop on the ASUS screen.
I can reboot into recovery, so CWM is not compromised. I have tried to push a new ZIP of the ROM via ADB (unsuccessful, thinking the drivers are nerfed) and through CWM (also unsuccessful).
If anyone has any ideas, please feel free to comment.
P.S. Please don't kill me Mods, I'll be good after this
Update:
After looking through the forums more I tried all of these:
Installed the Universal Naked Driver (Sorta Worked)
Reflashed the system blob from the most recent CyanogenMod Nightly (Says it wrote, I doubt it did)
Went into CWM, tried to Sideload the CM zip (Didn't work)
Then, I took my external SD, placed the CM zip onto it, rebooted the tablet w/ the SD in it, booted into CWM, TRIED a full system wipe (couldn't mount /data), and reflashed the ROM. That worked! ... sorta. Upon "successful install", I had CWM reboot the TF300T. It came to the ASUS Screen w/ a progress bar (went from 1% to 100% within a second). However, after that, it went back to the bootloop ASUS screen
I feel like I'm close on this one, any tips?
Kazman101 said:
Update:
After looking through the forums more I tried all of these:
Installed the Universal Naked Driver (Sorta Worked)
Reflashed the system blob from the most recent CyanogenMod Nightly (Says it wrote, I doubt it did)
Went into CWM, tried to Sideload the CM zip (Didn't work)
Then, I took my external SD, placed the CM zip onto it, rebooted the tablet w/ the SD in it, booted into CWM, TRIED a full system wipe (couldn't mount /data), and reflashed the ROM. That worked! ... sorta. Upon "successful install", I had CWM reboot the TF300T. It came to the ASUS Screen w/ a progress bar (went from 1% to 100% within a second). However, after that, it went back to the bootloop ASUS screen
I feel like I'm close on this one, any tips?
Click to expand...
Click to collapse
I would try to install TWRP recovery since CWM is sometimes a bit flaky, I would use TWRP 2.3.3.0 since I believe is the most stable but you can install the latest one 2.4.4.0, then flash the blob file via fastboot (instructions are at the twrp site) and repeat the same process as you did with CWM, wipe everything and then flash CM.zip from external SD and see if it works that way. If that does not work, try reflashing the stock system blob from Asus this time using fastboot and that will put you completely stock and then you can start over.
hope it helps.
Erik
ricco333 said:
I would try to install TWRP recovery since CWM is sometimes a bit flaky, I would use TWRP 2.3.3.0 since I believe is the most stable but you can install the latest one 2.4.4.0, then flash the blob file via fastboot (instructions are at the twrp site) and repeat the same process as you did with CWM, wipe everything and then flash CM.zip from external SD and see if it works that way. If that does not work, try reflashing the stock system blob from Asus this time using fastboot and that will put you completely stock and then you can start over.
hope it helps.
Erik
Click to expand...
Click to collapse
It Unbricked!
Step 1: Flashed TWRP 2.4.4.0 blob file to overwrite CWM (Check)
Step 2: Factory Reset and Wipe Entire Device (CHECK!?!?!)
Step 3: Flash CM.zip!?!?! (Not So Check ... PLAN B!)
Downloaded Chinese Stock system blob (don't ask, I know it was stupid, but go with me here)
Flashed the system blob (after 3 minutes ... SUCCESS!)
No more boot loop and back to stock ... now to root it again to get my sweet CyanogenMod back ...
Thank you Erik, your help was much appreciated!
Restored the Tablet TF101 back to stock rooted and everything worked. Installed CWM Did factory reset system wipes etc. Tried to install 3 different CM 10 all failed bad installation. Tried to installed the newest TWRP same thing I can't seem to install any rom from the external or internal just keeps saying bad?
What errors did TWRP tell you?
For TWRP why not download the GOO app from the playstore and find the option in the menu to allow it to install the open recovery script for you?
Had similar issues with my S4 with a particular rom but youve tried a few so i doubt its down to the download sites.
You may have to format the emmc and see how that goes as a last resort. (just make sure you have a rom placed on a micro sd as it will completely wipe the TF again but still keep your recovery)
Hello,
My TF700 was on a CleanRom (2.3 i think), for a while, i decided to update.
- I installed the latest CWM (via fastboot) and flashed a Cyanogen 10.2 "stable", but my tablet freezed very quickly after successful boot, i tried some reboots and get same problem.
- I tried to install a stock ODEX root ROM, the tablet freezed at asus logo
- I flashed TWRP instead of CWM, it doesn't helped
- I tried wipe data and cache with TWRP, then my data was not accessible anymore and TWRP was unable to re-create it
- I searched on forums and found on this one that flash a boot.blob file can solve the problem
- It doesn't and now CWM and TWRP refuse to work ....
So i post here before getting my tablet completely brick.
At this point, i get access to fastboot / abd, CWM load but don't work (reboot when trying to do something), TWRP don't load.
Any suggestion to get back to a Stock ODEX rooted rom ?
Excuse my english ...
Asphodele said:
Hello,
My TF700 was on a CleanRom (2.3 i think), for a while, i decided to update.
- I installed the latest CWM (via fastboot) and flashed a Cyanogen 10.2 "stable", but my tablet freezed very quickly after successful boot, i tried some reboots and get same problem.
- I tried to install a stock ODEX root ROM, the tablet freezed at asus logo
- I flashed TWRP instead of CWM, it doesn't helped
- I tried wipe data and cache with TWRP, then my data was not accessible anymore and TWRP was unable to re-create it
- I searched on forums and found on this one that flash a boot.blob file can solve the problem
- It doesn't and now CWM and TWRP refuse to work ....
So i post here before getting my tablet completely brick.
At this point, i get access to fastboot / abd, CWM load but don't work (reboot when trying to do something), TWRP don't load.
Any suggestion to get back to a Stock ODEX rooted rom ?
Excuse my english ...
Click to expand...
Click to collapse
Hey Your in the right place
Shoot me an email, we can review your issues and if we find a solution we can post back here to help
XDA users with there issues....
My email is everywhere talke a look around
Thx Josh
Asphodele said:
Hello,
My TF700 was on a CleanRom (2.3 i think), for a while, i decided to update.
- I installed the latest CWM (via fastboot) and flashed a Cyanogen 10.2 "stable", but my tablet freezed very quickly after successful boot, i tried some reboots and get same problem.
- I tried to install a stock ODEX root ROM, the tablet freezed at asus logo
- I flashed TWRP instead of CWM, it doesn't helped
- I tried wipe data and cache with TWRP, then my data was not accessible anymore and TWRP was unable to re-create it
- I searched on forums and found on this one that flash a boot.blob file can solve the problem
- It doesn't and now CWM and TWRP refuse to work ....
So i post here before getting my tablet completely brick.
At this point, i get access to fastboot / abd, CWM load but don't work (reboot when trying to do something), TWRP don't load.
Any suggestion to get back to a Stock ODEX rooted rom ?
Excuse my english ...
Click to expand...
Click to collapse
Sounds like you are on an old bootloader. Flash the stock rom from asus by unzipping the zip you download from their website and placing in the root folder of your micro sd and then go into rck from the bootloader menu (power + volume down whilst booting)
Or you could just flash it from recovery....
lj50036 helped me to flash a new bootloader, recovery, rom and nvflash to make it unbrickable
Not just helped he spent many times to explain me how it works and what he did.
He is very nice and this was a pleasure to talk with him, i'm happy that there's still person like that on this planet
see you !
Asphodele said:
lj50036 helped me to flash a new bootloader, recovery, rom and nvflash to make it unbrickable
Not just helped he spent many times to explain me how it works and what he did.
He is very nice and this was a pleasure to talk with him, i'm happy that there's still person like that on this planet
see you !
Click to expand...
Click to collapse
I buy a tf700 with cm 11 a few days ago i am really interessted on how this steps works. I really want to make it unbrickeable, But i dont really understand how it works. I can not enter in fastboot. at least i got cwm interface when rebooting with adb into recovery.
Can u explain how you did it?
It invovles flashing a modified bootloader and the flatline recovery and then using Wheelie to generate your nvflash blobs.
Step-by-step instructions (which you need to follow to the letter) are here:
https://www.androidroot.mobi/pages/guides/tegra3-guide-nvflash-jellybean/
Stuck in boot loop, fastboot and recovery accessible
Hello,
I'm having a similar issue and I need help! Initially my tablet was rooted with Cromi-X 5.4. Then I decided to try Crombi-KK.
Here is what happened:
- Updated TWRP recovery
- Did a full wipe as recommended
- Flashing got stuck at the Crombi-KK loading sign
- Tried to reflash but TWRP wasn't detecting data partition anymore
- Instead installed the other recommended recovery CWMR.
- Flashed Crombi-KK, it worked. Played around with it for a few days, it was wonderful, fast and responsive.
- Battery died out and when I turned it back on I got a UIDs system inconsistent error.
- I found online many recommendations to reflash so I tried to do that
- Since then I'm stuck in a boot loop. I see the initial "bios" Asus logo then it restarts over and over.
- I am able to access bootloader and recovery
I've tried reflashing the asus stock blob. I've tried wiping the data through CWMR but it starts working and then it restarts. I don't know what to do anymore, so if anyone can help me, I would really appreciate it!
Thanks
Which recovery and bootloader version do you have now?
A (for KK) outdated bootloader seems the most likely culprit.
You can try save the recovery log when you flash or grab a logcat of the bootloop, but probably it'll only tell you that the recovery cannot mount /data.
Determine that you are on the correct bootloader, if not update it. If you're lucky the tablet will start right up. If it doesn't, formatting /data is the only way I know to get it back. Not just wiping - formatting it. You will loose everything on internal SD, so I hope you have a nandroid you can restore from later.
If you use TWRP 2.7+ be aware that formatting can take more than an hour. Let it finish!
For good measure, download CROMBi-KK again, check the md5 and then flash that file.
I'm on 10.6.1.14.10 bootloader which I think is the latest one
I have 6.0.4.7 CWMR
I'm trying to format data completely but when i do it in CWMR it starts and then the tablet reboots on it's own after a couple of minutes.
How can I retrieve the logs, I never had to do it before.
Thanks for your help
Mhh, getting a little more complicated.
Your BL is ok...
What do you see in CWM when you go into Mounts and Storage? What is mounted?
The recovery logs are under Advanced > show logs.
I'm at work now but from what I remember the only thing mounted was the cache. I'll double check tonight. Do you think there's any hope or I have a brand new paper weight?
yasyas said:
I'm at work now but from what I remember the only thing mounted was the cache. I'll double check tonight. Do you think there's any hope or I have a brand new paper weight?
Click to expand...
Click to collapse
Can you fastboot flash twrp?
It's much much better than CWM, has its own terminal and will be easier to offer the correct format command.
sbdags said:
Can you fastboot flash twrp?
It's much much better than CWM, has its own terminal and will be easier to offer the correct format command.
Click to expand...
Click to collapse
So I flashed TWRP and when I go in mount/storage everything is selected except for system. Should I do a format data from the wipe menu before flashing crombi-kk again?
yasyas said:
So I flashed TWRP and when I go in mount/storage everything is selected except for system. Should I do a format data from the wipe menu before flashing crombi-kk again?
Click to expand...
Click to collapse
To be in the safe side, yes, that is what I would do. TWTRP 2.7.+ takes a long time to format and it may seem the process got stuck. Give it at least 90 minutes to finish.
Then reflash CROMBi
I'm back up and running !!!
This time installing TWRP, everything was mounted (maybe my previous flash before CWMR wasn't good), did a format data, waited until it was done, flashed latest Crombi-KK and going through setup now. Hopefully won't have the same UID issue on next shutdown. I didn't enable fsync or journaling so hopefully it won't happen again.
Thanks both of you for your help!
Good deal! Happy for you!
Rooting google pixel zl
Had my tf700 running CleanRom 4.2.1, and decidet to install a 4.4 just for the fun of it.
Upgraded my recovery, wiped /data storage, installed rom. After this my tablet pretty much stopped booting. 90% of the time it's stuck at boot screen (sometimes with animation running, sometimes not). Although once it did booted to a 4.4 Crombi-kk rom, but every 2-3 minutes it was rebooting.
What I have:
Access to bootloader, working CWM 6.0.4.7 for TF700T, ADB and fastboot access.
What I tried:
Installing TWRP and changing back to CWM, waiting for rom to "compile" everything (i guess around 2 days of doing that gotta be enough), Installing different roms (CleanRom, Crombi-kk, Zombi-x, Cyanogenmod 11 Nightly, Rooted stock rom).
Any suggestions on what can I do to recover my tablet?
And your bootloader version is... (insert drum roll here):
??????
Hello guys.
Last time I rooted and installed a Custom ROM was like 7-8 years ago with CM5 or so. So I'm not really up to date.
On my K1 tablet, I wanted to install the CarbonROM. Tablet runs Nougat.
The Root was successful, used fastboot for TWRP recovery. (Version 3.1.1 and 3.0.2, tried both). As in many tutorials described I wiped data/cache before installing. Installed CarbonROM (latest version) + gapps micro for 7.1 then wiped cache/dalvik and rebooted.
System then was stuck in bootloop forever, waited about 20mins but nothing happend.
Managed to backup by hard-reboot into recovery/adb and flash twrp again. Tried this time with twrp version 3.0.2, same issue.
I know about the presence of "blob", whatever it is. But since a few guides use it, and few dont, I tried with once with it but managed to land in bootloop again.
Tried with CWM but it didnt even recognize my SD card, or confused the internal storage as sd card. Moved the CarbonROM to the internal storage then and tried to install it. After boot image there was an android with a red "!" and "no command". Vol up + pwr -> recovery. rebooted. Still had the firmware from before, nothing happend at all.
I don't know anymore what to do to get CarbonROM installed and actually started.
Anybody got ideas or a actually a solution?
Greetings
Try a different ROM, or try another gapps (I've often had to mess with different gapps on AOSP ROMs on previous devices).
As for just getting the phone working again, you should have made a TWRP backup before trying to flash a custom ROM. Then you could have just restored the backup.