Database Info

[ODIN][UCKD5] Odin - Stock (100% or Root+3e) - (Update 06/05/11)

This will flash the stock kernel, modem, system, dbdata and cache. There's no need for a pit since we do not have any other OS versions to flash yet that would re-partition your device.
Instructions:
1) Make sure the drivers for the Infuse 4G are installed.
2) Please unzip the .zip file.
3) Run Odin3 v1.81.exe (as administrator if you are on Windows 7)
4) Place your phone into download mode (pull battery, press and hold both Volume keys, put battery in and plug the USB cable in)
5) Make sure your phone shows up in Odin as COM##
5) Click the PDA button and choose the .tar.md5 file in the .zip.
6) Press Start.
7) After it completes, it will reboot your device and should boot up like normal. If it fails on flash see FAQ Question 4 below!
There is ALWAYS risk when flashing your device. Unfortunately, I will not be held responsible. Please use this as a means to get back to stock if something happens.
* DO NOT FLASH PIT (PIT not included).
* DO NOT CHECK ANYTHING IN ODIN EXCEPT "AUTO-REBOOT" AND "F. RESET TIME" (should be checked by default)
FAQ:
Question 1: Why does it have .md5 at the end?
Answer: Its in md5 format so in case your download is corrupted, you dont brick your phone.
Question 2: Can I rename it to just .tar and flash?
Answer: DO NOT rename it from md5 format. If it says the md5 sum is invalid, then it will not flash. Just re-download again and try again.
Question 3: Why does it give an error if i try to open in in 7zip/WinRAR/WinZip?
Answer: It should! Windows doesn't recognize when an md5sum is written to the end of a file. Don't panic!
Question 4: It passed the md5sum check, but failed writing on factoryfs. What do I do?!?
Answer: This is exactly what happened to me. Don't panic. Follow these steps exactly:
* Hold the power button to turn off.
* Make sure Odin is still open.
* Plug the USB cable in and hold the volume keys down at the same time. You will be on the screen with a "Phone ! PC" screen.
* Press Start on Odin.
* Once it completes, it will boot up into recovery. Don't worry about wiping cache or user data. Just choose "Reboot Device".
This flash takes quite a long period of time due to the size of the files. I'd say it took me 5 - 10 minutes for the flash to complete. Be patient! Afterwards it booted up with recovery, and chose Reboot Now.
Thanks:
* codeworkx - for the advice and assistance!
* beatblaster - First tester after a bad framework-res update.
* Realityfalse - Second tester
* dotsad - Third tester
* imnuts - Very Helpful advice and instructions for Odin installations!
* My Infuse - Fourth and final tester (thought I lost her for a minute there!)
Download Links:
UCKD5 Stock + Root + 3e Modded Recovery
UCKD5 100% Stock (no root, no 3e Modded Recovery)

What a life saver

I second that, up and running again
Sent from my SAMSUNG-SGH-I997 using XDA App

not working
sitting at Samsung boot screen for 20 minutes now! Cant get recovery. any ideas?
Tried re-flashing multiple times. downloaded from mirror. same thing. reboots after odin is successful then sits endlessly at Samsung boot logo.

rblankman said:
sitting at Samsung boot screen for 20 minutes now! Cant get recovery. any ideas?
Tried re-flashing multiple times. downloaded from mirror. same thing. reboots after odin is successful then sits endlessly at Samsung boot logo.
Click to expand...
Click to collapse
go into the thread from lost1 with the stock rom and find the pit.pit file in the "additional" download. try that with repartition selected.
http://forum.xda-developers.com/showthread.php?t=1084837

Though it's too late for me to try it myself, I'm sure this will be a great help to everyone! Thanks so much!
Sent from my SAMSUNG-SGH-I997 using XDA App

Dani897 said:
go into the thread from lost1 with the stock rom and find the pit.pit file in the "additional" download. try that with repartition selected.
http://forum.xda-developers.com/showthread.php?t=1084837
Click to expand...
Click to collapse
same thing what i have to do ?

well use the .tar file in this thread, put it in the pda slot in odin. put the phone in download mode and connect it to the computer. have auto reboot selected. and hit start.
if that doesnt work then try it again except put pit.pit in the pit slot and the .tar from this thread in the phone slot, select repartition, put phone in download mode, connect it to the computer and hit start.

Dani897 said:
well use the .tar file in this thread, put it in the pda slot in odin. put the phone in download mode and connect it to the computer. have auto reboot selected. and hit start.
if that doesnt work then try it again except put pit.pit in the pit slot and the .tar from this thread in the phone slot, select repartition, put phone in download mode, connect it to the computer and hit start.
Click to expand...
Click to collapse
did you fix your phone and work fine now or still his lock Bootloader ?

no it was someone else. i have fixed my captivate many time though. that would have normally been my next step if it didnt work the first time.

rblankman said:
sitting at Samsung boot screen for 20 minutes now! Cant get recovery. any ideas?
Tried re-flashing multiple times. downloaded from mirror. same thing. reboots after odin is successful then sits endlessly at Samsung boot logo.
Click to expand...
Click to collapse
Sent from my SAMSUNG-SGH-I997 using XDA App
Can you wipe all user data and wipe cache from recovery (power phone off via power button or battery pull, hold both volune keys down, then hold power down until samsung appears on the screen and let go of ONLY power)? That should get you to boot.
This happened to beatblaster when we tested. Then he did the data wipes in recovery and booted up fine.

cant get recovery at all. tried all above. pit doesnt work

Thanks
Thanks for doing this, I am trying to learn how to dev on android and Ubuntu and was installing and also waiting for a way back before doing anything.

rblankman said:
cant get recovery at all. tried all above. pit doesnt work
Click to expand...
Click to collapse
Have you tried to wipe data and cache yet?

rblankman said:
cant get recovery at all. tried all above. pit doesnt work
Click to expand...
Click to collapse
Was your phone bricked before trying this? If so, how did you brick it?
Sent from my SAMSUNG-SGH-I997 using XDA App

wasnt bricked. wanted to try odin restore.

how can I clear data and cache without recovery? is there a way in ODIN?

rblankman said:
how can I clear data and cache without recovery? is there a way in ODIN?
Click to expand...
Click to collapse
TO get into recovery to wipe data and cache, unplug your phone from the USB cable then make sure the phone is powered off. While the device is powered off press and hold the 2 volume buttons then while holding those 2 volume buttons down press and hold the power button. That will get you into recovery. WHile in there, you can wipe user data and wipe cache. Give that a go.

understood. However, as I was able to successfuly get into recovery by that method before attempting the ODIN restore, It will not enter recovery after ODIN flashed the stock.

rblankman said:
understood. However, as I was able to successfuly get into recovery by that method before attempting the ODIN restore, It will not enter recovery after ODIN flashed the stock.
Click to expand...
Click to collapse
Whoa. The only thing I can recommend from here is to try to flash via ODIN again or take the brick back to the store and swap for new. Next time, I'd recommend not fixing anything unless it's broken

[Q] weird boot loop, tab can't be turn on or turn off

hi everyone
my tab got boot loop 2 days ago.i'm stuck at "samsung galaxy tab 7+" logo,i can't even enter the animation and another samsung logo,and every time i tried to turn off the machine,it did not.the screen just off few second and its on again with the same logo
and in the recovery mode, the tab said "can't mount thing" "no such directory" and etc with a "android + yellow triangle background"
i already flashing with ODIN(Firmware6200XXKL7/P6200OLBKJ1/P6200XXKL7/P6200XXKL7 and firmware : P6200XXKK6_P6200OLBKJ1_P6200XXKK6_HOME) twice and complete.but still got the problem
i would appreciate if someone help me to solve this problem or at least give me advice
btw,bought this device in from indonesia(made in korea)
Baseband Version: P6200GSMH
sorry for bad english
thanks before

try holding power and vol+ for at least 10 seconds, and keep holding it. or try power and volume down for 10+ seconds.
should attempt to get you into recovery or download mode.

chrisrotolo said:
try holding power and vol+ for at least 10 seconds, and keep holding it. or try power and volume down for 10+ seconds.
should attempt to get you into recovery or download mode.
Click to expand...
Click to collapse
thanks for the reply
i can go to the recovery mode and download mode..i already flash my tab in download mode and wipe data in recovery mode.but the problem still there
so what should i do?

see if you can get an adb log, you could also try Samsung Kies (2.0) It may have trouble finding device/ installing drivers; you might want to connect it in download mode. There are emergency recovery options in Kies I think, but its probably same thing as Odin. Are you sure that is the correct firmware for your device? are you familiar with Odin? possible bad flash/disconnected?/bad cable?
i recommend try flashing whatever firmware you originally had. a full stock one with .pit file would be ideal.
try sammobile.com/firmwares

chrisrotolo said:
see if you can get an adb log, you could also try Samsung Kies (2.0) It may have trouble finding device/ installing drivers; you might want to connect it in download mode. There are emergency recovery options in Kies I think, but its probably same thing as Odin. Are you sure that is the correct firmware for your device? are you familiar with Odin? possible bad flash/disconnected?/bad cable?
i recommend try flashing whatever firmware you originally had. a full stock one with .pit file would be ideal.
try sammobile.com/firmwares
Click to expand...
Click to collapse
thanks again
i don't know,that is correct firmware or not,but i pretty sure there is no bad cable or disconnected
many thanks for the recommendation,i will download it.let you know

just flashing with firmware sammobile.com still no luck..
i want try the other version firmware(same region and country) but there are five file in the archive file,
here the list
GT-P6200-MULTI-CSC-OLBJ1.tar.md5
MODEM_P6200XXKK1_REV_02_CL1075407.tar.md5
MODEM_P6200XXKK1_REV_04_CL1075407.tar.md5
P6200_APBOOT_P6200XXKK1_CL577298_REV02_user_mid_sh ip.tar.md5
P6200_CODE_P6200XKK1_CL577298_REV02_user_mid_ship .tar.md5
Click to expand...
Click to collapse
which file is the firmware?
and also,it's look like,until now there is no .pit file for p6200
any suggestion ?
thanks for the answer before

Urgent help on samsung galaxy tab p6200 needed plz
Model Number : GT–P6200
Android Version : 3.2
Baseband Version : P6200XXKL7
Kernel Version : 2.6.36-P6200JPKL2-CL606727 [email protected] #3
Build Number: HTJ85B P6200JPKL2
i have rooted my phone,
it was working perfectly fine,
but when i done factory reset then the problem started,
it ia automatically restarting again and again
not able to switch off n switch on
then download rom (P6200XXKL7_P6200XEUKL1_XEU)
and tried to flash rom but tar file is not showing from odin pda,
please help me

nabildarwajkar said:
Model Number : GT–P6200
Android Version : 3.2
Baseband Version : P6200XXKL7
Kernel Version : 2.6.36-P6200JPKL2-CL606727 [email protected] #3
Build Number: HTJ85B P6200JPKL2
i have rooted my phone,
it was working perfectly fine,
but when i done factory reset then the problem started,
it ia automatically restarting again and again
not able to switch off n switch on
then download rom (P6200XXKL7_P6200XEUKL1_XEU)
and tried to flash rom but tar file is not showing from odin pda,
please help me
Click to expand...
Click to collapse
Try this instructions carefully. It works for any samsung phones:
http://forum.xda-developers.com/showpost.php?p=27043121&postcount=9
but in step 3, when it says if you weren't in GB, don't worry about it. What it is, if you change version of android (i.e. from Honeycomb to ICS and vice versa), than you need to include pitfile and repartition, as well as flashing dbdata.rfs.

Thanks buddy
I will try as u suggested
and will come back soon after flashing
thanks

still same problem please help
i tried flashing as u suggested and successfully compleated but still restarting only 1 thing improved that is now am able to switch off my tab
please guys help me dnt wanna loose my tab
and 1 more thing in odeen, where i can put dbdata file
please help

You can flash dbdata on pda field as well. Make sure you use the correct file. Before you proceed with it, can you go to recovery mode and do factory wipe? Let me know if you got any mounting error message or not after wipe.
Nore: if you need a pitfile, you can download this:
http://forum.xda-developers.com/misc.php?do=showattachments&t=1441350

Any solution yet? My device suddenly acting the same way when I doing Factory Reset in cmw recovery. I've try doing reflashing via odin to xxkl7 and dxkl3 with no lock, im still stuck bootlooping on first splash screen.
Something I found is that if Im flashing the rom using heimdall, it always failed on flashing the cache, with a message saying that heimdall being crash. Any advice?

continue holding vol up and power through 2 reboots, you should get recovery mode.
My device also experiences similar symptoms when formating /data. Perhaps the file system is corrupt or mild superbrickbug.
Anyways what I usually do Is Odin back to stock, when it passes it hangs at boot, reboot to recovery and factory reset/ wipe data. Should boot now.
For /cache issue. try the first step I mentioned to get into recovery and wipe /cache, actually format it too, if you have CWM Recovery. Wipe dalvik and factory reset too. Then I would try Odin to stock. And again wipe /data if stock Odin doesnt boot.
good luck.

Odin Force Reboot .tar File (for those who are lazy)

If you're like me, you don't like having to pull your battery out to reboot your phone. When having problems with Odin I hate having to pull my battery out to simply reboot it when commands like "adb reboot" have spoiled me.
Here is a blank .tar file (just made in notepad) for Odin. Put it in the PDA slot and make sure Auto Reboot is checked. Click Start and Odin will reboot your Samsung device into Android. No wiping or writing.
Download: http://www.mediafire.com/?xbruaqwuryjnaua

came in handy - for a zero byte file. lol
lazy ppl ftw!

great!! thanks a lot!! how can i create a file like this that reboots the device in recovery mode? can you do that?

To flash it in recovery you will first have to boot in recovery... So this means nothing lol... Use quickboot app...

TmmyGN said:
great!! thanks a lot!! how can i create a file like this that reboots the device in recovery mode? can you do that?
Click to expand...
Click to collapse
Sorry for the really late response. I too am trying to figure out how to make Odin tell the phone to boot straight into recovery. One method I found does work. Find the CF-Autoroot package for your phone (if it exists), pull the cache.img out, put that cache.img into an odin package (find a tutorial on how to do that elsewhere), then flash and it will boot straight into recovery.
For example. I made a a custom odin package for my Galaxy Note 2 using a TWRP.img and the cache.img from the CF-Autoroot package. Flashed it in Odin and it installed TWRP and booted straight into recovery! This way the recovery-from-boot.p file can be deleted in recovery before it reinstalls the stock recovery.

can you help me, booting with odin on sgs1 to get into recovery mode. very importent
weehooherod2 said:
Sorry for the really late response. I too am trying to figure out how to make Odin tell the phone to boot straight into recovery. One method I found does work. Find the CF-Autoroot package for your phone (if it exists), pull the cache.img out, put that cache.img into an odin package (find a tutorial on how to do that elsewhere), then flash and it will boot straight into recovery.
For example. I made a a custom odin package for my Galaxy Note 2 using a TWRP.img and the cache.img from the CF-Autoroot package. Flashed it in Odin and it installed TWRP and booted straight into recovery! This way the recovery-from-boot.p file can be deleted in recovery before it reinstalls the stock recovery.
Click to expand...
Click to collapse
hello
all your info was very helpfull
I really need to boot my sgs1 with the cf-boot packege but Ididnt fine with the files you wrote.
please help me with a link to that packege for my galaxsy s 1
thanks
sagi

Wow you sir just saved my life. Thank You!
Power button on my skyrocket was broken, but I was able to get into ODIN and because of this reboot my phone!
Yes thank you again

sagi2k said:
hello
all your info was very helpfull
I really need to boot my sgs1 with the cf-boot packege but Ididnt fine with the files you wrote.
please help me with a link to that packege for my galaxsy s 1
thanks
sagi
Click to expand...
Click to collapse
I don't think I can help you out. CF-Root files don't contain the trick to boot straight into recovery. At least this is what I think, I don't have a phone that can use CF-Root to test it on. Picking apart CF-AutoRoot is what helped me. The Galaxy S 1 does not have CF-AutoRoot since that phone is set up differently than newer Samsung devices.

Great idea mate, power button broken in my sgs i9000 and if it turns off i can only access download mode.. So via Odin and your file i managed to power it on fast and simple.. Thx again..

My phone is stuck in recovery mode because the home button is broken, but when I connect my phone to pc, Odin can detect my phone. Can I use Odin to reboot my phone when it's in recovery model instead of download mode? Thank you.

^^ same question?
Can Odin just reboot?

TmmyGN said:
great!! thanks a lot!! how can i create a file like this that reboots the device in recovery mode? can you do that?
Click to expand...
Click to collapse
If I understand correctly this is a blank (0 byte) file which does nothing but after flashing is completed because autoreboot is checked the phone will reboot automatically. Genius indeed!

weehooherod2 said:
If you're like me, you don't like having to pull your battery out to reboot your phone. When having problems with Odin I hate having to pull my battery out to simply reboot it when commands like "adb reboot" have spoiled me.
Here is a blank .tar file (just made in notepad) for Odin. Put it in the PDA slot and make sure Auto Reboot is checked. Click Start and Odin will reboot your Samsung device into Android. No wiping or writing.
Download: http://www.mediafire.com/?xbruaqwuryjnaua
Click to expand...
Click to collapse
Worked like a charm... just to add ... in newer ODIN instead of PDA you'd see AP. Also in Options remember to uncheck "F. Reset Time" and keep "Auto Reboot" on as mentioned above.
P.S: I didn't check what happens if F. Reset Time is on. Just posted what worked for me.
Note:
This is a exactly a tool for those whose "power button not working" to get out of any of ODIN or recovery modes when required. Usually it is decrease volume button + power/side key button for more than 7 secs to reboot and come out of odin mode.
Thanks XDA.

[Q] Please Help Me: Samsung Galaxy Note 10.1

I have Samsung galaxy note 10.1 GT-N8010 UK model. so after 6 months i rooted it through odin and used to install some rooted apps. from playstore i installed an app and after that the tablet suddenly restarted and stucked on the logo "Samsung Galaxy Note 10.1" after that i restarted it in odin mode but nothing happens. some time recovery mode for wiping data but nothing happened. NOte: clockworkmod recovery mode doesnt opens just simple recovery mode. and now that also recovery mode also not opening just odin mode. So please guyz tell me have i bricked my device or its hardware isssue or software or it can be repaired please please help me.

od:n node is a good sign. just-find a stock image and flash with odin.

Thanks: BUt
thanks alot. please tell me that is unrooting method?

No, thats not the unrooting method.
Best idea is to flash a stock rom, re-root, then run triangle away to reset flash counter and status's. Then use Mobile ODIN pro to flash a stock rom, make sure if you want to go stock that you untick the everroot options and re-install mobile ODIN options, then also tick wipe cache\data and wipe dalvik cache. This will wipe EVERYTHING off your internal memory so make sure you have backed up everything that you want to keep.
You now have a factory reset stock phone. No flash count, ALL status's back to "Official".

done
i have done the first method flashed 4.1.2 through odin and thanks alot it worked. now i want to install AOKP i like it so for this is should reroot my phone and flash it through odin and cwm not working on my tablet. thanks to all of you

ultramag69 said:
No, thats not the unrooting method.
Best idea is to flash a stock rom, re-root, then run triangle away to reset flash counter and status's. Then use Mobile ODIN pro to flash a stock rom, make sure if you want to go stock that you untick the everroot options and re-install mobile ODIN options, then also tick wipe cache\data and wipe dalvik cache. This will wipe EVERYTHING off your internal memory so make sure you have backed up everything that you want to keep.
You now have a factory reset stock phone. No flash count, ALL status's back to "Official".
Click to expand...
Click to collapse
please guy help me out.... when i flash stock recovery through odin so the odin suddenly give messeage not responding after that in message box there is written end... so please how could i reset my device

Stock recovery ????
Flash stock rom via Odin gives you stock recovery .
jje

Mansoor1223 said:
please guy help me out.... when i flash stock recovery through odin so the odin suddenly give messeage not responding after that in message box there is written end... so please how could i reset my device
Click to expand...
Click to collapse
if its the stock rom you open in odin it will generally stop responding, just let it be and in a few minutes it will be ok then you can flash. its just checking the file

Mansoor1223 said:
please guy help me out.... when i flash stock recovery through odin so the odin suddenly give messeage not responding after that in message box there is written end... so please how could i reset my device
Click to expand...
Click to collapse
If you're using PC odin you need to go to download mode 1st - from power off hold down lower volume and power button until the "warning" comes on the screen. press up volume and you get to download mode.
Connect the tab to the PC with USB and run ODIN. It will light up one of the com ports with "Com 0" Or something displayed. Make sure you DON'tT have Kies active or it won't work. It must be exited from or uninstalled. Also don't have another samsung phone/tab attached or it will pick this up too...
Shouldn't do anything but if it does detect, it is a shock when "FAIL" shows up, especially if you're not sure already... You might do something stupid like disconnect the tab in the middle of a flash...

[Q] GT-P5100 softbircked or hardbricked

I had CM10.1-3 stable installed, and everything was perfect, then I turned on the native encryption, the tablet started to acted slow but working, one day I woke up and find the tablet will not turn on so here is what I have done
Restarted the tablet, entered the decryption password and still hanged
Restarted the tablet again and then it boot loops on Samsung galax tab 2 10.1 screen
Restarted again and it will not boot at all
No recovery
I can access download mode
So I did try to reflash CWM 6.0.2 again with heimdall and it failed
All I got was "Firmware error occurred while updating please use kies the phone ! computer screen"
No other mode is working
Got Stock rom 4.2.2 tired with odin finishes but still reboot is black screen
Got esspreso_16G PIT file repartitioned and reinstalled the stock rom still no booting
Using heimdall repartitioned with resspreso PIT file from 201202 and I got DOWNLOAD MODE AGAIN !
Try to install orignal rom or CWM brick again
Using heimdall repartitioned and installed stock kernel only and x-loder
So currently it is charging and have DOWNLOAD MODE stating count of customes and kernel of SMASUNG_OFFICAL
My question is, is this software brick or hardware ? and how I can get the tablet up and running again using ODIN or Heimdall ?
Thank You
d

I am not sure, but what i would try:
Try Odin, flash Stockrom - uncheck "Auto-Reboot" !
When Odin finished directly boot into recovery from downloadmode.
Make a factory reset if recovery booted.
Reboot device.

Android-Andi said:
I am not sure, but what i would try:
Try Odin, flash Stockrom - uncheck "Auto-Reboot" !
When Odin finished directly boot into recovery from downloadmode.
Make a factory reset if recovery booted.
Reboot device.
Click to expand...
Click to collapse
Did try that, Odin 3.07 or something keeps flushing everything but the download mode on the tablet froze on 25% of the blue bar. then I get again error will firmware update, so I add again to heimdall and repartitioned and tried to flash the rom part by part starting with MLO as X-Loader and it told me successful with no reboot, tried to flash factorysysfs also stuck at 28% with heimdall, had to do reboot of the device, now the device is just blank black, no download mode, or the emergency firmware update via kies screen "phone ! computer" no idea what should I do :s it seems dead.

Why are you flashing pit-files all the time????? these files can difenitly dangerous and can kill your tab with a breeze if not used with care ....
you can´t do nothing with odin or heimdall if you don´t have downloadmode or "Black screen of death" ("Firmware error occurred while updating (...)")...
good luck

Android-Andi said:
Why are you flashing pit-files all the time????? these files can difenitly dangerous and can kill your tab with a breeze if not used with care ....
you can´t do nothing with odin or heimdall if you don´t have downloadmode or "Black screen of death" ("Firmware error occurred while updating (...)")...
good luck
Click to expand...
Click to collapse
It was the only way to get back to DownloadMode is by flashing PIT file, however I managed to flash orginal Kenerl back at that time and I did manage to flash X-Loder seems that what bricked the tablet, Now when I am connected to the PC I can see OMAP4430 driver, Some saying I need to use JTAG "RIFF BOX" or maybe OMAPFlasher but I am not sure if this the correct step or not, what really bothers me that when I had DownloadMode odin will not finish more than 28% of the rom. what do you think should I use OMAPFlasher ? and if there any guide to do so ? I just need the tablet to have bootloader and Kernel so I can flash back with Odin.
D