Database Info

Anyone try Skinomi?

With all the talk about the 2.5D glass I was looking at the non-glass screen protectors on Amazon....the Skinomi gets 30+ people giving it 5 stars which makes me VERY suspicious since NOT ONE of the reviewers mentioned if it fits over the edges of the curved glass or is cut just to the flat part.
Has anyone personally tried a Skinomi on their Note 4? If the reviews are to be believed then this could be a winner for me.

jrapps said:
With all the talk about the 2.5D glass I was looking at the non-glass screen protectors on Amazon....the Skinomi gets 30+ people giving it 5 stars which makes me VERY suspicious since NOT ONE of the reviewers mentioned if it fits over the edges of the curved glass or is cut just to the flat part.
Has anyone personally tried a Skinomi on their Note 4? If the reviews are to be believed then this could be a winner for me.
Click to expand...
Click to collapse
because it's wet screen protector. it's going to fit very well on this device. once it dry it's going to be really good. I am going to get one soon.

If it's the same as their other screen protector, it'll have a soft slight tacky feel to it and your stylus will not run smoothly on it. I have skinomi skins on my note 3 and gear and I don't use their included screen protector on the note 3 cause of this.
Sent from my SM-N910T using Tapatalk

What Plastic Screen Protectors are you using on the Note 4?

What Plastic Screen Protectors are you using on the Note 4? I'm under the notion that typical PET film is compatible with most cases.

I got the Zagg HDX screen protector and I'm pretty happy with it. I was hoping for tempered glass, but I don't think that's going to happen any time soon. The HDX protector was easy to install and it feels great. No issues with s-pen making divots or marks so far (been about a week of use).
INITIALLY... like immediately after you put it on, it feels a bit "sticky" when you run a finger over it. Just clean it off though and it's fine. Must be some residual "sticktion" from the films that cover the film prior to install.

+1 for the Zagg HDX. It's more expensive, but well worth it. The glass protectors look funky on this phone, and you can barely tell the Zagg is on there except for the somewhat sharp edge. I usually go without a protector, but the Note 4 is VERY scratchable... I had several light scratches in the coating that could only be seen in the right light only after a few days of use, so I had to get the protector.

I can rest-assure you its very hard not to get even the tiniest scratch on the shiny metal portions of the Note 4 especially the first time you put the phone in a case. When buying new, the device jostles while in transit, and I've seen scratches in areas where no one will see; that's just me.
Is the HDX as thin as one of those cheap plastic screen protectors found on eBay?

The HDX is a little thicker than the cheap ones. It's a multi-layer construction and provides impact resistance. It's still thin and flexible enough that it handles the slight curve at the edge of the screen and doesn't halo or anything. AND... I'm using the Samsung case and it works with that perfectly.

I'm currently using the iCarez film protector and it does not fit with my Seidio Surface case because it's too thick. Has a bubble in the lower left corner I can't get rid of and when I put the phone in my Akron Mega Grip car mount the side arms cause a large bubble on the left side. Not sure how thick it is but hoping for better results with the Zagg HDX which is 1 mm thick. Also don't like S Pen feel with the iCarez film.

I've been using Spigen Steinheil screen protectors since I first got a Motorola OG Driod. The Steinheil have always been durable and protective of my screens. I have a Spigen Steinheil Crystal screen protector on my Note 4. It works well and doesn't interfere with the native screen. They come 3 in a pack.

Zagg hdx until my iloome shows up

See here. Double thread?
http://forum.xda-developers.com/showthread.php?t=2987371

Thanks, moderators please close this thread or merge if applicable.
eksoccer99 said:
See here. Double thread?
http://forum.xda-developers.com/showthread.php?t=2987371
Click to expand...
Click to collapse

TechMatte screen protectors are the best quality, and best value!
http://www.amazon.com/gp/aw/d/B00MX...SY200_QL40&dpPl=1&dpID=510dhI4oDpL&ref=plSrch

Tempered Glass on UAG Case!

Folks
Recently I bought the UAG Maverick Case for my Note 4, and it's stunning beauty made like to resist any space impact with a style.
The screen protector film came with it is indeed offers decent protection, but it's terribly one fingerprint/smudge magnet. My hands do sweat at times and indeed gets oily often. So y'all can imagine how awkward using a beast.
Also the touch feel has been horribly ruined with the protection film, The feel of Spigen premium series is entirely different from this.
Many of the Note 4 users has said, Tempered Glass offers tough protection without taking down much the actual glass feel of the touch screen. So pals, Please do suggest me the best tempered glass solutions which covers a bit out of the display area (black screen) with the UAG Case on.
No Halo effects, Fingerprints and smudge shouldn't be attracted and must be wiped like in actual screen.
Thanks
-CODENEX

CODENEX said:
So pals, Please do suggest me the best tempered glass solutions which covers a bit out of the display area (black screen) with the UAG Case on.
Click to expand...
Click to collapse
I have a UAG case with a Moshi iVisor edge-to-edge protector on. Application was easy and there is no halo. It fits fine with the UAG case. However, please note that I have not tried taking the case off, and I have only been using this setup for just over a week. Others have reported that the iVisor can get dust under it through time, as it only has adhesive round the edges and not under the glass. As yet, I have not experienced this. An alternative might be the Momax or the Tough Armour as I believe these do have adhesive under the glass as well as the edges. I purchased a Momax too, but have not tried it as the iVisor is perfect at the moment. (Note that the first Momax had the capacitive buttons wrong (menu instead of recent apps), but on the one I got that has been corrected). Have a good read through the many threads on Tempered Glass protectors, as others have experimented with different brands and also use UAG cases.

I bought an arcadia full screen protector. It did not work well with UAG. Popped the glass up. I loved the look of the glass that I got rid of my 2 uag cases.
Sent from my SAMSUNG-SM-N910A using xda premium

Kinsman-UK said:
I have a UAG case with a Moshi iVisor edge-to-edge protector on. Application was easy and there is no halo. It fits fine with the UAG case. However, please note that I have not tried taking the case off, and I have only been using this setup for just over a week. Others have reported that the iVisor can get dust under it through time, as it only has adhesive round the edges and not under the glass. As yet, I have not experienced this. An alternative might be the Momax or the Tough Armour as I believe these do have adhesive under the glass as well as the edges. I purchased a Momax too, but have not tried it as the iVisor is perfect at the moment. (Note that the first Momax had the capacitive buttons wrong (menu instead of recent apps), but on the one I got that has been corrected). Have a good read through the many threads on Tempered Glass protectors, as others have experimented with different brands and also use UAG cases.
Click to expand...
Click to collapse
Thanks Kinsman-UK giving your view on Moshi iVisor! :good: Just can't think of getting dust/debris getting through the edges as it may result more damage than actually keeping the screen bare. I've checked the Momax website and found Glass Pro XS Screen Protector but turned down no luck to order one

I ordered my Momax from shop.brando.com - they seem to still have black and white versions available, post internationally.

Is that all?
I've gone nuts selecting over tons of brands, seriously picking up the right phone was never been this hard.
My prime needs are,
1. Compatibility with UAG Case over the phone. It must not pop of even on the small impact with the case.
2. It must sit some area more than actual screen (black area).
3. Good bonding with screen and don't let any dust/debris let through the groves or edges of the protector.
Somewhere landed between some premium and well known brands, viz
iloome, Moshi, MOMAX, intelliARMOR

I don't know about other people's experience but I have dropped my Note 4 three times in the past week (I know! Unbelievable, never dropped my old phone once, and then I get a new one and...) - anyway, the Moshi was not affected by the drops and is still firmly attached. I've only been using it for a couple of weeks, and haven't had the UAG off an on yet, but it seems fine. I think the Momax will probably be even better as it has adhesive all over, but I haven't tried it on yet because the Moshi is fine for the moment. The only thing I would say is that when applying the Moshi I left the phone out of the case for two days, and applied pressure all around the edges to make sure it was well adhered before putting the UAG on. This is just my experience, so just FWIW and YMMV etc etc
EDIT: Note that the Moshi does have a 'dot matrix' pattern in the glass (something to do with the way it is strengthened I think), but it is only noticeable if you look closely in direct sunlight. I only mention it because some people may see this as a problem - doesn't bother me (in fact I struggle to see it at all in normal use).

I use the Spigen slim Armor Case with the "Ultimate xplosion proof" crystal clear screen protector and have not lost any noticeable sensitivity at all. Not trying to convince you... just what I use and 100% happy with it
sent from my rooted Note 4 and loving it

JaceSGN4 said:
I use the Spigen slim Armor Case with the "Ultimate xplosion proof" crystal clear screen protector and have not lost any noticeable sensitivity at all. Not trying to convince you... just what I use and 100% happy with it
sent from my rooted Note 4 and loving it
Click to expand...
Click to collapse
If you're happy with it, then it's totally worth! :good:

Best Screen Protector (Not Tempered Glass)

Purpose
So I've been trying out the different screen protectors for the 6P, including the tempered glass ones, but I can't find one that I just love. I just want to get different suggestions, opinions, maybe some reviews.
What I've Tried
Spigen Screen Protector Crystal - Favorite so far
Rearth Invisible Defender - Lifted up when in case.

Most case friendly screen protector?

I thought for sure it will be Samsung OEM, but no... is there any consensus which screen protector is THE case friendly screen protector?

I really don't think there is one. You may get away with one of the "slim" cases and the self healing screen protectors.
There's threads dedicated to this and there isn't a good match yet.
I'm using the S-View cover and no screen protector.

Bodyguardz Contour HD is the only one I've found that is compatible with cases from Spigen, VRS Design and UAG

Yootech is very friendly with my otterbox commuter.
Sent from my SM-N930T using Tapatalk