I am selling my TF700 and wanted to return to stock before selling it(currently have chromi-x 5.3). I downloaded the 4.2.1 stock rom from the Asus website, unzipped, copied the rom zip to the sd card of the tablet. Rebooted to TWRP and installed the zip. Everything seemed to install fine. The tablet rebooted and the lock screen came up. But when I swipe to unlock, I get a 'Unfortunately, Launcher has stopped' message. I can hit Ok, but the message just keeps repeating. Any help would be greatly appreciated.
keeferb said:
I am selling my TF700 and wanted to return to stock before selling it(currently have chromi-x 5.3). I downloaded the 4.2.1 stock rom from the Asus website, unzipped, copied the rom zip to the sd card of the tablet. Rebooted to TWRP and installed the zip. Everything seemed to install fine. The tablet rebooted and the lock screen came up. But when I swipe to unlock, I get a 'Unfortunately, Launcher has stopped' message. I can hit Ok, but the message just keeps repeating. Any help would be greatly appreciated.
Click to expand...
Click to collapse
Make sure you wipe data first in TWRP?
But you'll have to install TWRP again to do that
Personally I would have just left CROMI-X on it - better customer service
sbdags said:
Make sure you wipe data first in TWRP?
But you'll have to install TWRP again to do that
Personally I would have just left CROMI-X on it - better customer service
Click to expand...
Click to collapse
Thanks for the quick response. And you're right, I should have just left it alone and sold it as is.
Any advice on how to get TWRP re-installed? I believe the first time around I did it by installing GooManager from the Play Store. Since I can't get there that option won't work.
keeferb said:
Thanks for the quick response. And you're right, I should have just left it alone and sold it as is.
Any advice on how to get TWRP re-installed? I believe the first time around I did it by installing GooManager from the Play Store. Since I can't get there that option won't work.
Click to expand...
Click to collapse
You'll have to install it over fastboot - the instructions are in the TWRP thread in the dev section
keeferb said:
I am selling my TF700 and wanted to return to stock before selling it(currently have chromi-x 5.3). I downloaded the 4.2.1 stock rom from the Asus website, unzipped, copied the rom zip to the sd card of the tablet. Rebooted to TWRP and installed the zip. Everything seemed to install fine. The tablet rebooted and the lock screen came up. But when I swipe to unlock, I get a 'Unfortunately, Launcher has stopped' message. I can hit Ok, but the message just keeps repeating. Any help would be greatly appreciated.
Click to expand...
Click to collapse
I assume you downloaded the correct SKU since you did everything else correct.
My guess is: a bad flash.
Try booting into recovery. If you get the dead Android, the stock recovery installed fine. If you have the Asus firmware on your microSD, rename it to EP201_768_SDUPDATE.zip and boot into recovery. It should recognize the file and flash it.
Alternatively, you could flash TWRP in fastboot and flash the firmware again.
Side note: I will never understand why people flash the tablet back to the lousy stock rom to sell it.... Anybody doing the least bit of research should know that this tablet with CROMi-X installed is 10x better - that actually only custom ROMing makes it useable.....
I would offer it here on the XDA market as: "TF700 in mint condition with a clean installation of any bootloader/recovery/kernel/rom you desire"
I re-installed TWRP via fastboot, formatted data, and reflashed stock. Worked this time. Thanks for your help.
Related
I brought a transformer tf300 a few days ago that was already rooted and unlocked. I can't get adobe flash to work. I tried side loading a few version of adobe but still no success. Google market says my device is not compatible with adobe. I don't think the rooted device really serves me any purpose so I would like to take it back to factory condition. I need some help doing it since I have never rooted a device before.
It is rooted with
aokp-tf300t-build-38.
Android ver 4.0.4.
Kernel 2.6.39.4 g2bf1397-dirty.
Build IMM761.
Thanks for all your help if you can. I will need step by step instructions, and thanks again for the help
jflynn0 said:
I brought a transformer tf300 a few days ago that was already rooted and unlocked. I can't get adobe flash to work. I tried side loading a few version of adobe but still no success. Google market says my device is not compatible with adobe. I don't think the rooted device really serves me any purpose so I would like to take it back to factory condition. I need some help doing it since I have never rooted a device before.
It is rooted with
aokp-tf300t-build-38.
Android ver 4.0.4.
Kernel 2.6.39.4 g2bf1397-dirty.
Build IMM761.
Thanks for all your help if you can. I will need step by step instructions, and thanks again for the help
Click to expand...
Click to collapse
download the latest firmware from the asus site first. http://www.asus.com/Tablet/Transformer_Pad/ASUS_Transformer_Pad_TF300T/#download
Then install the current software version. You can use the instructions from here to reflash stock rom in post 2
http://forum.xda-developers.com/showthread.php?t=1668173
dxwilliams40 said:
download the latest firmware from the asus site first. http://www.asus.com/Tablet/Transformer_Pad/ASUS_Transformer_Pad_TF300T/#download
Then install the current software version. You can use the instructions from here to reflash stock rom in post 2
http://forum.xda-developers.com/showthread.php?t=1668173
Click to expand...
Click to collapse
don't know what im doing wrong when i try to flash the stock rom i get stuck as the ASUS splash screen with spinning wheel. Any suggestions?!?
cjohnsonthe2nd said:
don't know what im doing wrong when i try to flash the stock rom i get stuck as the ASUS splash screen with spinning wheel. Any suggestions?!?
Click to expand...
Click to collapse
Did you unzip the firmware and flash the zip named "US_epad-user-9.4.3.29"?
dxwilliams40 said:
Did you unzip the firmware and flash the zip named "US_epad-user-9.4.3.29"?
Click to expand...
Click to collapse
yes and CWM says install from sd card complete, no errors. I get the intial boot screen with the blue progress bar then I get stuck at the spash screen with the spinning wheel.
Luckily I had a nandroid of my AOKP setup and can go back to that. Ive tried a few times today to return to stock with the same results.
cjohnsonthe2nd said:
yes and CWM says install from sd card complete, no errors. I get the intial boot screen with the blue progress bar then I get stuck at the spash screen with the spinning wheel.
Luckily I had a nandroid of my AOKP setup and can go back to that. Ive tried a few times today to return to stock with the same results.
Click to expand...
Click to collapse
Remember to full wipe before installation including /system and after clear dalvik and cache then fix permissions.
By not wiping /system can cause some data to be left and corrupt stock installation had this happen on my g2x and have seen it on some other threads.
Sent from my ASUS Transformer Pad TF300T using XDA Premium HD app
I wiped the cache before I started the install and now when I boot into the usb fastboot my comp flashed a bootloader notification but then nothing else happens. I tried it a second time and I dont even get the notification. Also if I let it boot regular the Asus screen shows when i first boot but then nothing ever comes up just black screen
Hello everyone,
My problem is this: I wanted to install a CM10 nightly on the device, so I root using the DebugfsRoot method, install rom manager, flash a recovery, try to install a ROM and it did not work. Rebooting into recovery got me the red triangle, but using the volume buttons allowed me to get in (only it did not have the option to install updates or anything. I think it was just he mounting and partition options)
Since I did not unlock the device before doing this, I chose to do so using ASUS's unlock utility. Once done, I tried booting into recovery, but the device would be stuck at "booting recovery kernel image" and won't budge. I tried flashing different version of CW but it did not seem to work.
Finally, for some reason, I chose the "wipe data" option from the bootloader and the device was stuck, again, at "booting recovery kernel image", only this time I can't boot into a ROM nor can I boot back into bootloader.
What happens when I boot using power and volume down is this:-
The device is Unlocked
Android cardhu-user bootloader <2.10 e> released by "US_epad-9.4.5.26-20120720" A03
Checking for android ota recovery
Booting recovery kernel image
and then everything's stuck.
Booting normally makes the device stop at "the device is unlocked" message because, I assume, there is no ROM flashed into the device.
Thanks for helping in advance.
It's not just that I can't get the unit to go into recovery, It's that I can't even get to fastboot (it tries to go into recovery every time I try to get into fastboot)
ShiroiKage said:
It's not just that I can't get the unit to go into recovery, It's that I can't even get to fastboot (it tries to go into recovery every time I try to get into fastboot)
Click to expand...
Click to collapse
I believe your device is bricked. Using a wrong version of custom recovery may caused this. I haven't seen anyone able to fix the issue that you having right now, the only thing is to send out to Asus for repair.
buhohitr said:
I believe your device is bricked. Using a wrong version of custom recovery may caused this. I haven't seen anyone able to fix the issue that you having right now, the only thing is to send out to Asus for repair.
Click to expand...
Click to collapse
So, if I get it repaired/replaced, what version of CW recovery should I get? It seems that there is not, yet, a version for the Infinity tab. I really want to get a custom ROM because the stuff ASUS has slapped on their version of Android gets under my skin.
ShiroiKage said:
So, if I get it repaired/replaced, what version of CW recovery should I get? It seems that there is not, yet, a version for the Infinity tab. I really want to get a custom ROM because the stuff ASUS has slapped on their version of Android gets under my skin.
Click to expand...
Click to collapse
The Team Win TWRP version 2.3.1.0 works really well. It's a touch recovery and very easy to use and full featured.
okantomi said:
The Team Win TWRP version 2.3.1.0 works really well. It's a touch recovery and very easy to use and full featured.
Click to expand...
Click to collapse
One very last question:-
Would it work if I get the CM10 nightly for the TF300T installed on a TF700T (since it's practically the same device with a different screen)? If not, is there a ROM that's pure JB without ASUS's stuff installed one it?
Your replies are very much appreciated.
ShiroiKage said:
One very last question:-
Would it work if I get the CM10 nightly for the TF300T installed on a TF700T (since it's practically the same device with a different screen)? If not, is there a ROM that's pure JB without ASUS's stuff installed one it?
Your replies are very much appreciated.
Click to expand...
Click to collapse
I would NOT recommend you do so with tf300 on tf700. There is no pure stock debloated version for JB, however, if you want to stay as close as stock and stable I would recommend "Cleanrom for JB". This rom doesn't have Asus bloatware and a few performance tweaks make it very good.
buhohitr said:
I would NOT recommend you do so with tf300 on tf700. There is no pure stock debloated version for JB, however, if you want to stay as close as stock and stable I would recommend "Cleanrom for JB". This rom doesn't have Asus bloatware and a few performance tweaks make it very good.
Click to expand...
Click to collapse
So I got it replaced (Best Buy swapped it for a new one) and everything's fine. I even installed Clean ROM and it's good. Problem is that the left speaker is not working and I need to flash the stock ROM to make sure it's nothing caused by software, before I go back and re-return the unit. However, ASUS's firmware is not longer wanting to flash. It gives me the "failed" message in TWR's recovery (no backup because my internal memory was wiped when installing ASUS's JB update :/)
EDIT: Never mind. I thought the holes at the bottom, on either side of the USP port, were the speakers. Turns out I was not thinking straight. Still, I'd like to know if anyone has an idea as to why the ASUS firmware is not wanting to install.
ShiroiKage said:
So I got it replaced (Best Buy swapped it for a new one) and everything's fine. I even installed Clean ROM and it's good. Problem is that the left speaker is not working and I need to flash the stock ROM to make sure it's nothing caused by software, before I go back and re-return the unit. However, ASUS's firmware is not longer wanting to flash. It gives me the "failed" message in TWR's recovery (no backup because my internal memory was wiped when installing ASUS's JB update :/)
EDIT: Never mind. I thought the holes at the bottom, on either side of the USP port, were the speakers. Turns out I was not thinking straight. Still, I'd like to know if anyone has an idea as to why the ASUS firmware is not wanting to install.
Click to expand...
Click to collapse
You can't install the ASUS firmware through custom recovery. It has to be stock. I believe there are signature checks that prevent it from installing otherwise.
Sent from my ASUS Transformer Pad TF700T
did you unzip the file? should be a zip within a zip. you flash the zip inside
lafester said:
did you unzip the file? should be a zip within a zip. you flash the zip inside
Click to expand...
Click to collapse
You know, I unzipped the file the first time I installed it to get Clean ROM to flash, I had the unzipped folder there yet I managed to forget to use the unzipped file. /InfiniteFacePalm
Hi guys,
My tablet is rooted (and back to fully stock ROM from Acer's website). I updated OTA just a moment ago, and I was totally shocked to see the message "Booting kernal recovery image - Recovery verified failed..."
I tried rebooting, fastbooting,....they all don't work. How should I move on? What can be done now?
Please do help me. I need the tablet, and never knew such a situation could arise.
Thanks!
Sounds like your device's bootloader is locked again. Just perform a fastboot oem unlock and see whether that fixes your problem. Worked for me.
/edit: Which, of course, assumes you're able to get into fastboot. You should be able to get in using adb... what do you mean by "they all don't work"?
got the same problem. how do you get into fastboot again?
Liquidator said:
Sounds like your device's bootloader is locked again. Just perform a fastboot oem unlock and see whether that fixes your problem. Worked for me.
/edit: Which, of course, assumes you're able to get into fastboot. You should be able to get in using adb... what do you mean by "they all don't work"?
Click to expand...
Click to collapse
I assume yes, it is locked since I went back to a fully Stock ROM (which includes the locked bootloader?). But what has a bootloader got to do with an OTA update?
What I mean by they all don't work is that, even when I try shutting down, rebooting or enter stock recovery using the volume keys + power button, nothing works. Absolutely nothing! The screen just stays there.
I then thought, let the battery run down and maybe I can enter stock recovery and flash the zip for the stock ROM again from my SD card, but this doesn't work. The tablet just boots again to that same screen, with a message saying wiping off update cache and something to do with cdm.
I fear my device is gone. If anyone can lead me to getting back my device up and running, as a small token of appreciation, I will provide you with either $10 via PayPal or a $10 Google Play Gift Card code. This is really important for me, and I can't seem to find any help on this matter on the Internet.
I tried to update to JB, by flashing a stock rom through CWM. But then I try to get into the recovery I get hte same message. For me, if i dont try to get into the recovery it repeats an animation of the Acer logo and it never ends. I believe ill have to give it to the acer support. I also cant get into the stock recovery, so we pretty much have the same problem.
Temporeiches said:
I tried to update to JB, by flashing a stock rom through CWM. But then I try to get into the recovery I get hte same message. For me, if i dont try to get into the recovery it repeats an animation of the Acer logo and it never ends. I believe ill have to give it to the acer support. I also cant get into the stock recovery, so we pretty much have the same problem.
Click to expand...
Click to collapse
No, we don't have a same problem. I don't have CWM on my device, and I am doing an OTA. I can do absolutely NOTHING other than stare at the error message in red ink and the static Acer logo.
Okay sorry. Just want to tell you that I flashed the stock rom and so I lost CWM. If i find a way to fix mine ill tell you and it might help you.
As an update, after letting the tablets battery drain out and then charging it back up, the message I am seeing now is a little longer:
Erasing cache before SD update...
SD Update cmd: recovery
--Update_package=sdcard:update.zip
Booting recovery kernal image
Recovery verified failed...
PS: If anyone can make sense of this message, please tell me.
If I recall correctly, the stock recovery has no user interface whatsoever. All it does is offer to flash a signed update.zip from the external SD card.
I have/had CWM installed, and got the "Recovery verified failed..." message after flashing JB as well. Thing is, it appears Acer is not only flashing the system, but also a new bootloader (which explains the new key-press combos necessary to get into recovery). Why it's not working for you on a stock device I am unable to tell, but something may have gone wrong during your update.
So, suggestion: Place the update.zip from Acer on a microSD and see what happens. With any luck, it'll just flash the system contained within the zip again and it'll work.
Liquidator said:
If I recall correctly, the stock recovery has no user interface whatsoever. All it does is offer to flash a signed update.zip from the external SD card.
I have/had CWM installed, and got the "Recovery verified failed..." message after flashing JB as well. Thing is, it appears Acer is not only flashing the system, but also a new bootloader (which explains the new key-press combos necessary to get into recovery). Why it's not working for you on a stock device I am unable to tell, but something may have gone wrong during your update.
So, suggestion: Place the update.zip from Acer on a microSD and see what happens. With any luck, it'll just flash the system contained within the zip again and it'll work.
Click to expand...
Click to collapse
So how do I get this latest firmware? I can't find on acers website.
himmatsj said:
So how do I get this latest firmware? I can't find on acers website.
Click to expand...
Click to collapse
http://global-download.acer.com/Step5.aspx?Step1=Tablet&Step2=ICONIA%20TAB&Step3=A510&BC=Acer&SC=&LC=en&OS=a09&FS=O02&Category=OS
Change the Language and download the largest file (thats stock ICS) best is the RV28.RC02.WW.GEN1 so later you can retry an update
Temporeiches said:
http://global-download.acer.com/Step5.aspx?Step1=Tablet&Step2=ICONIA%20TAB&Step3=A510&BC=Acer&SC=&LC=en&OS=a09&FS=O02&Category=OS
Change the Language and download the largest file (thats stock ICS) best is the RV28.RC02.WW.GEN1 so later you can retry an update
Click to expand...
Click to collapse
Did the update fail because I already had the previous Acer firmware version as update.zip on my ext sd card? The tab is friggin useless as things stand!!
himmatsj said:
Did the update fail because I already had the previous Acer firmware version as update.zip on my ext sd card? The tab is friggin useless as things stand!!
Click to expand...
Click to collapse
Try this:
Here's how to get into fastboot (bootloader) manually:
Turn off your tablet
Hold the Volume Down (**) button and press the Power button
As soon as the tablet vibrates, let go of only the Power button (keep the Volume Down (**) button pressed) and immediately start switching the Screen Rotation Lock slider back and forth.
If this works continue.Connect your device to PC. Open your device manager look for fastboot under other devices and right click on it and select update driver. Then click browse my computer for driver software and locate the folder i could send by mail, just ask me. Click Next, and it might say it is a threat, but click continue (its safe as I edited it myself) and let it install. Next download http://forum.xda-developers.com/showthread.php?t=1661324 and use it to unlock bootloader. Next follow instructions on http://forum.xda-developers.com/showthread.php?t=1866378 Then place a ROM from NoThrills on an external sdcard, and insert it into the tablet. If the tablet is shut down get into CWM through the key combination for ICS bootloader power and ** sound button and for JB bootloader
* PowerON+Vol-
* At the first vibration release PowerOn, keeping Vol- pressed
* At the second vibration release Vol- and press Vol+
Next flash the rom from external sdcard and reboot. Now things should work.
Guys, can anyone help me understand, why when I do an OTA on a fully stock ROM (no bootloader unlocked, no custom recovery, no custom ROM and no root), do I get the message I mention earlier? (that is: Booting recovery kernel image, Recovery verified failed...)
Mind you, I did go to a custom ROM once, which was No Thrills A700 Fraken ROM for the A510. Could that be an issue here?
Please, just help me understand why I am continuously getting this error when I do an OTA. If you can successfully explain to me, I owe you $10 (PayPal or Google Play Gift Code).
Thanks!
PS: I am not looking for a solution (don't tell me flash this and that, I've done all that). I am merely looking for an explanantion as to why the above happens.
himmatsj said:
Guys, can anyone help me understand, why when I do an OTA on a fully stock ROM (no bootloader unlocked, no custom recovery, no custom ROM and no root), do I get the message I mention earlier? (that is: Booting recovery kernel image, Recovery verified failed...)
Mind you, I did go to a custom ROM once, which was No Thrills A700 Fraken ROM for the A510. Could that be an issue here?
Please, just help me understand why I am continuously getting this error when I do an OTA. If you can successfully explain to me, I owe you $10 (PayPal or Google Play Gift Code).
Thanks!
PS: I am not looking for a solution (don't tell me flash this and that, I've done all that). I am merely looking for an explanantion as to why the above happens.
Click to expand...
Click to collapse
it likely happend due to you rooting and flashing a non stock kernel.
when you apply the update off acers website after having it cwm and a customer rom i don't believe it will replace the recovery properly.
this is becasue the files on acers sites are updates and not full roms.
this is the reason why i did not do it to mine.
don't quote me on it but i had a similar issue with an old phone and ended up stuck on customer roms after that.
malos1984 said:
it likely happend due to you rooting and flashing a non stock kernel.
when you apply the update off acers website after having it cwm and a customer rom i don't believe it will replace the recovery properly.
this is becasue the files on acers sites are updates and not full roms.
this is the reason why i did not do it to mine.
don't quote me on it but i had a similar issue with an old phone and ended up stuck on customer roms after that.
Click to expand...
Click to collapse
You mean when I flashed the A700 Franken ROM by NoThrills, that had a non-stock kernel?
If so, what can I do to get back stock kernel on my tablet? There has to be some way, right?
PS: I flashed the official files from Acer via the update.zip file from their website. From here: http://forum.xda-developers.com/showthread.php?t=1897791
PSS: I checked, and I *think* you are wrong because by flashing the files from Acer's website I am back to the stock kernel. Version number: 2.6.39.4+ (Correct me if I am wrong to assume as such)
himmatsj said:
You mean when I flashed the A700 Franken ROM by NoThrills, that had a non-stock kernel?
If so, what can I do to get back stock kernel on my tablet? There has to be some way, right?
PS: I flashed the official files from Acer via the update.zip file from their website. From here: http://forum.xda-developers.com/showthread.php?t=1897791
PSS: I checked, and I *think* you are wrong because by flashing the files from Acer's website I am back to the stock kernel. Version number: 2.6.39.4+ (Correct me if I am wrong to assume as such)
Click to expand...
Click to collapse
yes but i don't think those update.zip's restore the recovery partitions correctly. They seem to only restore the stock rom and nothing else?
Nothrills may be able to clarify that though. i don't know too much about how these roms work.
malos1984 said:
yes but i don't think those update.zip's restore the recovery partitions correctly. They seem to only restore the stock rom and nothing else?
Nothrills may be able to clarify that though. i don't know too much about how these roms work.
Click to expand...
Click to collapse
Yeah, I hope someone who is directly involved in these things like NoThrills can come and enlighten us.
Thread moved to Q&A
MD
Problem SOLVED!
Hi guys,
For all those having the "recovery verification failed" error while trying to do OTA, I know the fix!
The key is, you need to restore stock recovery manually. There's a zip file of the stock recovery here (at the bottom of the first post). Just restore stock recovery as per usual.
Steps to follow in brief:
1) Install stock recovery manually from HERE
2) If your's isn't the stock Acer ROM, download the correct ICS version for your region from HERE (place it as update.zip and follow steps as per normal to flash)
3) Go to settings>apps>all apps>systemupdater, and then clear data/cache.
4) Reboot tablet and you should get an OTA notification.
5) You're done!
Won't bore you with all the details...
Was unhappy on TWRP 2.5 with Chromi 4.6.7
I knew that you had to install CWM to go to Cyanogenmod, but I couldn't get clockworkmod to let me change the recovery option even after I downloaded a compatible tf700 .img file.
So I got fearless (read stupid) and just used TWRP to install Cyanogenmod.
It worked, but not completely, I have no Play Store, many apps missing. Browser is working, wifi is up, but it never asks me for my google account, and I can't finish installing apps (in particular I wan't to install RomManager so I can try to get CWM installed).
Going back to Stock or Chromi doesn't seem to work. It says "Successful" but it won't boot, I get to an animation which just spins eternally.
Bob Graham
Well, it's probably the details that will matter... as in: which steps you exactly took to get into this mess...
ASFAIK TWRP is totally fine with CM roms, but did you do a clean install, a full wipe when going from CromiX to CM and then again back?
Also, it sounds as if you did not flash the GAPPS package after you flashed the CM rom.
I would suggest you flash back to CM, flash the GAPPS package and see if you can boot.
Good luck....
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD
Having no Play Store does signal to me you might have forgotten to flash the GAPPS package.
rvgraham said:
Won't bore you with all the details...
.
Bob Graham
Click to expand...
Click to collapse
You're both right. Got help from moderator on CM forum and got everything working.
Thank you.
Hi,
Sorry for the noob question here, I've managed to get myself very confused as to the state of my tf700t.
Some time ago I unlocked my bootloader and rooted my device (stock ROM with su I believe) and installed TWRP. All was well, but of course I couldn't get Android 4.2 OTA, so given I don't really use root much I decided to try to get back as close to stock as possible. I downloaded the 10.4.4.20 firmware from Asus and flashed it in using TWRP, so far so good.
Still no option to OTA, so I figured I would download and flash 10.6.1.14 instead and do the same thing, but I have problems! If I boot into recovery, instead of TWRP I get the android logo with the open door and spinning blue icosahedron. Poor old android then keels over backwards with an open chest and an alert sign. The tablet then reboots normally.
Question 1: Have I overwritten my recovery when I flashed the stock ROM? - I'm not sure if the ROMs should even overwrite the recovery partition; if this shouldn't happen, are there any clues as to what I have done?
The system actually recognises that I have 10.6.1.14 on my SD card and offers to install it, but that reboots and gives me the same dead android lying on his back. Question 2: Could this be related to the (broken?) recovery image, or could it just be a duff download of the firmware?
I suppose the bug question is how should i proceed? Should I look for a way to re-root the device, reinstall TWRP (maybe using goomanager) and flash again or am I just hopelessly misunderstanding where I am? Many thanks for any steers you chaps can offer.
Anatosuchus said:
Hi,
Sorry for the noob question here, I've managed to get myself very confused as to the state of my tf700t.
Some time ago I unlocked my bootloader and rooted my device (stock ROM with su I believe) and installed TWRP. All was well, but of course I couldn't get Android 4.2 OTA, so given I don't really use root much I decided to try to get back as close to stock as possible. I downloaded the 10.4.4.20 firmware from Asus and flashed it in using TWRP, so far so good.
Still no option to OTA, so I figured I would download and flash 10.6.1.14 instead and do the same thing, but I have problems! If I boot into recovery, instead of TWRP I get the android logo with the open door and spinning blue icosahedron. Poor old android then keels over backwards with an open chest and an alert sign. The tablet then reboots normally.
Question 1: Have I overwritten my recovery when I flashed the stock ROM? - I'm not sure if the ROMs should even overwrite the recovery partition; if this shouldn't happen, are there any clues as to what I have done?
The system actually recognises that I have 10.6.1.14 on my SD card and offers to install it, but that reboots and gives me the same dead android lying on his back. Question 2: Could this be related to the (broken?) recovery image, or could it just be a duff download of the firmware?
I suppose the bug question is how should i proceed? Should I look for a way to re-root the device, reinstall TWRP (maybe using goomanager) and flash again or am I just hopelessly misunderstanding where I am? Many thanks for any steers you chaps can offer.
Click to expand...
Click to collapse
The stock Asus firmware includes bootloader, kernel, recovery and apps. You have flashed the stock recovery. Head over to the twrp thread or my ROM thread in my sig to see how to get twrp 2.5 onto your tab.
Anatosuchus said:
Hi,
Sorry for the noob question here, I've managed to get myself very confused as to the state of my tf700t.
Some time ago I unlocked my bootloader and rooted my device (stock ROM with su I believe) and installed TWRP. All was well, but of course I couldn't get Android 4.2 OTA, so given I don't really use root much I decided to try to get back as close to stock as possible. I downloaded the 10.4.4.20 firmware from Asus and flashed it in using TWRP, so far so good.
Still no option to OTA, so I figured I would download and flash 10.6.1.14 instead and do the same thing, but I have problems! If I boot into recovery, instead of TWRP I get the android logo with the open door and spinning blue icosahedron. Poor old android then keels over backwards with an open chest and an alert sign. The tablet then reboots normally.
Question 1: Have I overwritten my recovery when I flashed the stock ROM? - I'm not sure if the ROMs should even overwrite the recovery partition; if this shouldn't happen, are there any clues as to what I have done?
The system actually recognises that I have 10.6.1.14 on my SD card and offers to install it, but that reboots and gives me the same dead android lying on his back. Question 2: Could this be related to the (broken?) recovery image, or could it just be a duff download of the firmware?
I suppose the bug question is how should i proceed? Should I look for a way to re-root the device, reinstall TWRP (maybe using goomanager) and flash again or am I just hopelessly misunderstanding where I am? Many thanks for any steers you chaps can offer.
Click to expand...
Click to collapse
Yes, you did. Everytime you install stock file of any version, it will update your bootloader, rom, and kernel. Just use Motochopper to root your device and reinstall your custom recovery with goomanager.
No, it is stock recovery. Just reroot with motochopper and install custom recovery with goomanager. Have fun. :good:
Right, thanks! If I want to stay completely stock I just need to figure out why the newer update is failing. Could be the file name now I think about it.
Otherwise I'll re-root and re-TWRP...
Anatosuchus said:
Hi,
Sorry for the noob question here, I've managed to get myself very confused as to the state of my tf700t.
Some time ago I unlocked my bootloader and rooted my device (stock ROM with su I believe) and installed TWRP. All was well, but of course I couldn't get Android 4.2 OTA, so given I don't really use root much I decided to try to get back as close to stock as possible. I downloaded the 10.4.4.20 firmware from Asus and flashed it in using TWRP, so far so good.
Still no option to OTA, so I figured I would download and flash 10.6.1.14 instead and do the same thing, but I have problems! If I boot into recovery, instead of TWRP I get the android logo with the open door and spinning blue icosahedron. Poor old android then keels over backwards with an open chest and an alert sign. The tablet then reboots normally.
Question 1: Have I overwritten my recovery when I flashed the stock ROM? - I'm not sure if the ROMs should even overwrite the recovery partition; if this shouldn't happen, are there any clues as to what I have done?
The system actually recognises that I have 10.6.1.14 on my SD card and offers to install it, but that reboots and gives me the same dead android lying on his back. Question 2: Could this be related to the (broken?) recovery image, or could it just be a duff download of the firmware?
I suppose the bug question is how should i proceed? Should I look for a way to re-root the device, reinstall TWRP (maybe using goomanager) and flash again or am I just hopelessly misunderstanding where I am? Many thanks for any steers you chaps can offer.
Click to expand...
Click to collapse
The Android on his back is your stock recovery and it does not find a valid update file.
Weird is, that your system seems to see the 10.6.1.14 file (I assume you get an automatic notification and click "install" or "update" ) and then the recovery does not seem to install it...?
You could have a bad download, so try that first if you want to get the latest stock rom, or you can try to rename the downloaded file to EP201_768_SDUPDATE.zip, put it on your microSD card and reboot into recovery. The recovery should recognize the update file and start flashing it.
But since you are unlocked anyway - why don't you give CromiX a try? It runs so much better than the stock rom!
And for that, yes you would have to root again using the Motochopper tool and then install TWRP 2.5 with Goo Manager.
If you go that route make sure you flash the latest bootloader from the OP of the CROMiX thread first, boot back into your old rom once before you flash CROMiX.
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD
Alright, I'm convinced - I'll try going totally custom! Presumably CromiX handles the external keyboard and touch pad properly?
Anatosuchus said:
Alright, I'm convinced - I'll try going totally custom! Presumably CromiX handles the external keyboard and touch pad properly?
Click to expand...
Click to collapse
It's based on the stock rom, cleaned up and tweaked and optimized. Everything works - and better than on stock! I recommend selecting the option to disable fsync during installation. It boosts performance considerably, and since the rom is totally stable, the "risk" is neglible.
You will love it!
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD
OK, ChromiX installed! Looks interesting already, will tinker with it over the next couple of days.