How to force 3g in Moto G - Moto G Q&A, Help & Troubleshooting

Hi:
The Moto G has the options of choosing between 3G and 2G networks but 3G option doesn't force. I mean, if 3G signal is weak sometimes it changes to 2G and is not easy to return 3G network.
I know there is and android code:
*#*#4636#*#*
That code theoretically could force to 3G. I have not used it because I don't know exactly how to use it and I would know if is possible to recover the original state once it has been used.
I know there is an app called Phone testing that could do the same
Has anybody used this app? Does it work with Moto G? Is it possible to recover original state if something goes wrong?
I have found some threats at this forum with this topic but there is not an easy solution.

ElTron said:
Hi:
The Moto G has the options of choosing between 3G and 2G networks but 3G option doesn't force. I mean, if 3G signal is weak sometimes it changes to 2G and is not easy to return 3G network.
I know there is and android code:
*#*#4636#*#*
That code theoretically could force to 3G. I have not used it because I don't know exactly how to use it and I would know if is possible to recover the original state once it has been used.
I know there is an app called Phone testing that could do the same
Has anybody used this app? Does it work with Moto G? Is it possible to recover original state if something goes wrong?
I have found some threats at this forum with this topic but there is not an easy solution.
Click to expand...
Click to collapse
settings>>more>>mobile networks>>preferred network type

mahi98 said:
settings>>more>>mobile networks>>preferred network type
Click to expand...
Click to collapse
Thanks, I knew this. In this set there are only two possibilities 2G or 3G.
If 3G is setted means that if a 3G network is available and the signal is strong enough then the phone will try to connect this network But sometimes if the signal is not very strong the phone will change to 2G. The problem arises because the phone decides too fast to change to 2G.
I know in other phones there is a set that forces only 3G. This option is not available in Moto G and I'm searching how to force only 3G.

ElTron said:
Thanks, I knew this. In this set there are only two possibilities 2G or 3G.
If 3G is setted means that if a 3G network is available and the signal is strong enough then the phone will try to connect this network But sometimes if the signal is not very strong the phone will change to 2G. The problem arises because the phone decides too fast to change to 2G.
I know in other phones there is a set that forces only 3G. This option is not available in Moto G and I'm searching how to force only 3G.
Click to expand...
Click to collapse
*#*#4636#*#* - > phone information - >scroll down->in that drop down select wcdma only.
Sent from my XT1033 using Tapatalk

akshaysalunke13 said:
*#*#4636#*#* - > phone information - >scroll down->in that drop down select wcdma only.
Sent from my XT1033 using Tapatalk
Click to expand...
Click to collapse
Ok thanks:
The possible options are:
GSM only
WCDMA only
GSM auto (PRL)
CDMA auto (PRL)
CDMA only
EvDo only
GSM/CDMA auto (PRL)
LTE/GSM auto (PRL)
LTE/GSM/CDMA auto (PRL)
LTE only
Unknown
To force 3G "WCDMA only" must be chosen.
And to return to the original state, what is the option "GSM/CDMA auto (PRL)" or "CDMA auto (PRL)" or "Unknown"?

In the last post I think I was wrong. The option to return to the original state must be "WCMDA preferred".
Thanks.

tellinfo app

akshaysalunke13 said:
*#*#4636#*#* - > phone information - >scroll down->in that drop down select wcdma only.
Sent from my XT1033 using Tapatalk
Click to expand...
Click to collapse
Bro, That #*#*4636#*#* doesnt work on my phone, actually no codes work on my phone, when i press the last * then the dialer comes, nothing happen. Pls help me out. I want also an Auto mode for preferred network type. Where 3G network is available it will work on 3G and where 3G is not available, it will automatically switch to 2G and then again 3G where its applicable.

3G only in MOTO G
You should use data sim in slot 1.
simoniub said:
Bro, That #*#*4636#*#* doesnt work on my phone, actually no codes work on my phone, when i press the last * then the dialer comes, nothing happen. Pls help me out. I want also an Auto mode for preferred network type. Where 3G network is available it will work on 3G and where 3G is not available, it will automatically switch to 2G and then again 3G where its applicable.
Click to expand...
Click to collapse

My 8GB single sim device is running on 174.44.1.falcon_umts.Retail.en.US and when I want to open the service menu by typing *#*#4636#*#* then nothing happens. Actually this types of codes does not work on my device. please help me.
Code Description
*#*#4636#*#* Display information about Phone, Battery and Usage statistics
*#*#7780#*#* Resetting your phone to factory state-Only deletes application data and applications
*2767*3855# It's a complete wiping of your mobile also it reinstalls the phones firmware
*#*#34971539#*#* Shows completes information about the camera
*#*#7594#*#* Changing the power button behavior-Enables direct poweroff once the code enabled
*#*#273283*255*663282*#*#* For a quick backup to all your media files
*#*#197328640#*#* Enabling test mode for service activity
*#*#232339#*#* OR *#*#526#*#* Wireless Lan Tests
*#*#232338#*#* Displays Wi-Fi Mac-address
*#*#1472365#*#* For a quick GPS test
*#*#1575#*#* A Different type GPS test
*#*#0283#*#* Packet Loopback test
*#*#0*#*#* LCD display test
*#*#0673#*#* OR *#*#0289#*#* Audio test
*#*#0842#*#* Vibration and Backlight test
*#*#2663#*#* Displays touch-screen version
*#*#2664#*#* Touch-Screen test
*#*#0588#*#* Proximity sensor test
*#*#3264#*#* Ram version
*#*#232331#*#* Bluetooth test
*#*#7262626#*#* Field test
*#*#232337#*#* Displays bluetooth device address
*#*#8255#*#* For Google Talk service monitoring
*#*#4986*2650468#*#* PDA, Phone, Hardware, RF Call Date firmware info
*#*#1234#*#* PDA and Phone firmware info
*#*#1111#*#* FTA Software version
*#*#2222#*#* FTA Hardware verion
*#*#44336#*#* Displays Build time and change list number

simoniub said:
My 8GB single sim device is running on 174.44.1.falcon_umts.Retail.en.US and when I want to open the service menu by typing *#*#4636#*#* then nothing happens. Actually this types of codes does not work on my device. please help me.
CodeDescription
*#*#4636#*#*Display information about Phone, Battery and Usage statistics
*#*#7780#*#*Resetting your phone to factory state-Only deletes application data and applications
*2767*3855#It's a complete wiping of your mobile also it reinstalls the phones firmware
*#*#34971539#*#*Shows completes information about the camera
*#*#7594#*#*Changing the power button behavior-Enables direct poweroff once the code enabled
*#*#273283*255*663282*#*#*For a quick backup to all your media files
*#*#197328640#*#*Enabling test mode for service activity
*#*#232339#*#* OR *#*#526#*#*Wireless Lan Tests
*#*#232338#*#*Displays Wi-Fi Mac-address
*#*#1472365#*#*For a quick GPS test
*#*#1575#*#*A Different type GPS test
*#*#0283#*#*Packet Loopback test
*#*#0*#*#*LCD display test
*#*#0673#*#* OR *#*#0289#*#*Audio test
*#*#0842#*#*Vibration and Backlight test
*#*#2663#*#*Displays touch-screen version
*#*#2664#*#*Touch-Screen test
*#*#0588#*#*Proximity sensor test
*#*#3264#*#*Ram version
*#*#232331#*#*Bluetooth test
*#*#7262626#*#*Field test
*#*#232337#*#*Displays bluetooth device address
*#*#8255#*#*For Google Talk service monitoring
*#*#4986*2650468#*#*PDA, Phone, Hardware, RF Call Date firmware info
*#*#1234#*#*PDA and Phone firmware info
*#*#1111#*#*FTA Software version
*#*#2222#*#*FTA Hardware verion
*#*#44336#*#*Displays Build time and change list number
Click to expand...
Click to collapse
Get the app called phone testing from the play store
Sent from my XT1034 using XDA Premium 4 mobile app

Related

[2G/3G/3.5G] Preferred Network Types Explained & How To Change It Easily

I'm noticing most of us are on the AT&T Network, yet there are those that do not want or need 3G/3.5G and want to use 2G or have another carrier so they cant take advantage of the speeds because they are on a Network such as T-Mobile.
Obviously someone using primarily or mainly 2G will see significantly more battery life.
This is good for someone that rarely uses data service or goes online using WIFI for the most part.
To change or edit your Preferred Network type go to your Phone app
then enter the following: *#*#4636#*#*
>Phone Information
>Set Preferred Network Type
Now you are able to change and edit the way your phone looks for and uses the Network you are currently on.
The Terms are explained below:
Preferred Network Types change the type of frequency the phone searches for.
Android is used on several devices that can gain access to different cell carriers.
For simplicity, there are two main types of cell carriers, GSM and CDMA.
The following popular data communication technology is associated with each cell carrier type:
GSM = GPRS (2g), EDGE(2g), UMTS(3g), WCDMA(3g), HSDPA(3g) {Cell Carrier examples: AT&T and T-Mobile}
CDMA = CDMA*(2/3g) EV-DO(3g) WiMax(3/4g) {Cell Carrier examples: Verizon and Sprint}
Now that the general stuff is out of the way, here's my take on the Preferred Network types:
WCDMA preferred - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 3G is favored more.
GSM only - The GSM phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
WCDMA only - The GSM phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM auto (PRL) - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more. This one is a bit confusing to me since PRL is associated mostly with CDMA technology and not GSM technology.
CDMA auto (PRL) - The CDMA phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more.
CDMA only - The CDMA phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
EvDo only - The CDMA phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM/CDMA auto (PRL) - Some phones are equipped with both GSM and CDMA capabilities. This setting appears to just have the phone attempt to stay connected to the data communication type that works the best.
Unknown - If none of the above fit or the phone is acting weird as far as connecting to the carrier, you will see your preferred network type is set to this
When using the 'only' options you should still be able to make calls.
To put things into perspective, The Nexus One is set to WCDMA preferred as default and the Droid Incredible is set to CDMA auto (PRL).
My Samsun S does not recognise my sim.The sim works in another phone. I tried to change the preferred networkto CDMA preferred, as it is on "unknown". It does not allow me to change it. Please help, as this new phone is now doorstopper.
Azizj said:
My Samsun S does not recognise my sim.The sim works in another phone. I tried to change the preferred networkto CDMA preferred, as it is on "unknown". It does not allow me to change it. Please help, as this new phone is now doorstopper.
Click to expand...
Click to collapse
Go to your devices section, seriously...
Sent from Team Pirate! Using Tapatalk 2
legend221 said:
I'm noticing most of us are on the AT&T Network, yet there are those that do not want or need 3G/3.5G and want to use 2G or have another carrier so they cant take advantage of the speeds because they are on a Network such as T-Mobile.
Obviously someone using primarily or mainly 2G will see significantly more battery life.
This is good for someone that rarely uses data service or goes online using WIFI for the most part.
To change or edit your Preferred Network type go to your Phone app
then enter the following: *#*#4636#*#*
>Phone Information
>Set Preferred Network Type
Now you are able to change and edit the way your phone looks for and uses the Network you are currently on.
The Terms are explained below:
Preferred Network Types change the type of frequency the phone searches for.
Android is used on several devices that can gain access to different cell carriers.
For simplicity, there are two main types of cell carriers, GSM and CDMA.
The following popular data communication technology is associated with each cell carrier type:
GSM = GPRS (2g), EDGE(2g), UMTS(3g), WCDMA(3g), HSDPA(3g) {Cell Carrier examples: AT&T and T-Mobile}
CDMA = CDMA*(2/3g) EV-DO(3g) WiMax(3/4g) {Cell Carrier examples: Verizon and Sprint}
Now that the general stuff is out of the way, here's my take on the Preferred Network types:
WCDMA preferred - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 3G is favored more.
GSM only - The GSM phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
WCDMA only - The GSM phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM auto (PRL) - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more. This one is a bit confusing to me since PRL is associated mostly with CDMA technology and not GSM technology.
CDMA auto (PRL) - The CDMA phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more.
CDMA only - The CDMA phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
EvDo only - The CDMA phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM/CDMA auto (PRL) - Some phones are equipped with both GSM and CDMA capabilities. This setting appears to just have the phone attempt to stay connected to the data communication type that works the best.
Unknown - If none of the above fit or the phone is acting weird as far as connecting to the carrier, you will see your preferred network type is set to this
When using the 'only' options you should still be able to make calls.
To put things into perspective, The Nexus One is set to WCDMA preferred as default and the Droid Incredible is set to CDMA auto (PRL).
Click to expand...
Click to collapse
This option has not worked on any Sense ROM I have tried for the HTC Inspire. It works great on CM7 but does nothing but stay on 3G on sense.
For sense Rom if you are rooted this is how you do it
From today screen
1. Hit menu
2. Click settings
3. Click wireless and networks
4. Scroll down to mobile networks
5. Choose network mode
6. Change to gsm
This will lock you into edge only. Even after reboot settings will stay phone must be rooted or it does not hold settings
If you want 3g/4g only. Set tab to wcdma only
I am running coredroid 9.4
Sent from my Inspire 4G using xda app-developers app
insanenyc said:
For sense Rom if you are rooted this is how you do it
From today screen
1. Hit menu
2. Click settings
3. Click wireless and networks
4. Scroll down to mobile networks
5. Choose network mode
6. Change to gsm
This will lock you into edge only even after reboot settings will stay phone must be rooted or it does not hold settings
If you want 3g/4g only set tab to wcdma only
I am running coredroid 9.4
Sent from my Inspire 4G using xda app-developers app
Click to expand...
Click to collapse
I have tried this on CoreDroid and ARHD and no luck. Went through settings menu and used the *#*#4636#*#* options and neither one sticks. Could it be my radio and hboot and the interface with Sense?
EDIT: Going to try ARHD again and see. If not, I will try CoreDroid.
EDIT: Still a no go for either ROM...ClearDroid included. So far, I have only been able to do this via either method (plus a built in toggle) via CM7. This begs the question of whether this is a software issue with HTC Sense.
Strange I remember when I was on stock sense Rom the settings wouldn't stick. But as soon as I rooted and downloaded a custom Rom it did stick sorry you are having trouble. Here is my complete rom/radio/kernal
Coredroid 9.4 = Rom
12.56.60.25u_26.10.04.03m=radio
Lordmod 5.0 is the kernal
I also changed my build.prop settings to enable real 4g and tweaked gsm gprs umits huspa hsdpa I do not know if this had any effect on making settings stick
Sent from my Inspire 4G using xda app-developers app
Build.prop tweaks
insanenyc said:
Strange I remember when I was on stock sense Rom the settings wouldn't stick. But as soon as I rooted and downloaded a custom Rom it did stick sorry you are having trouble. Here is my complete rom/radio/kernal
Coredroid 9.4 = Rom
12.56.60.25u_26.10.04.03m=radio
Lordmod 5.0 is the kernal
I also changed my build.prop settings to enable real 4g and tweaked gsm gprs umits huspa hsdpa I do not know if this had any effect on making settings stick
Click to expand...
Click to collapse
Thank you for the feedback. I am running the same radio. I will revisit CoreDroid again. Perhaps editing the build prop is the way to go in this case. It is the one thing I have not tried on any of the ROMs for this phone other than to rename my phone from Desire HD to Inspire (which was only on one or two ROMS). Would you mind sharing your build.prop settings and tweaks so that I can have a baseline to work with? I'll tweak from there as necessary to meet my wants.
I edited only these in build.prop
ro.ril.gprsclass=10
ro.ril.hsdpa.category=28
ro.ril.hsupa.category=7
ro.ril.hsxpa=2
Reboot twice and don't forget to backup your settings
I used prop editor to edit build.prop its easier but I don't have a link for it but I think there is a link in that thread I posted below
All info can be found here
http://forum.xda-developers.com/showthread.php?t=982082
Sent from my Inspire 4G using xda app-developers app
Give build.prop change a try
insanenyc said:
I edited only these in build.prop
ro.ril.gprsclass=10
ro.ril.hsdpa.category=28
ro.ril.hsupa.category=7
ro.ril.hsxpa=2
Reboot twice and don't forget to backup your settings
I used prop editor to edit build.prop its easier but I don't have a link for it but I think there is a link in that thread I posted below
All info can be found here
http://forum.xda-developers.com/showthread.php?t=982082
Sent from my Inspire 4G using xda app-developers app
Click to expand...
Click to collapse
Thanks. I will give this a shot. I have edited the build.prop before but only for the purpose of changing device id name. I don't remember what I used to edit it but I am sure I can find it again. No worries about the backups. I kept copies of original build.prop saved plus did a nandroid right before making the changes. Never can be too careful. Will post results later tonight on whether this was success or not for locking in the ability to switch between bands.
In that thread I posted is the build.prop app 8th or 9th post down. That tweak is just for faster data speeds and I do not think it will lock u on to 2 g or 3g but who knows
Sent from my Inspire 4G using xda app-developers app
insanenyc said:
In that thread I posted is the build.prop app 8th or 9th post down. That tweak is just for faster data speeds and I do not think it will lock u on to 2 g or 3g but who knows
Sent from my Inspire 4G using xda app-developers app
Click to expand...
Click to collapse
No go for 2g/3g options. Have not been able to really say about faster data speeds but definitely something I will keep notes on. Back to where I started. Looks like CM will remain my ROM of choice for now.
Preferred network type set to unknown
Hi frnds.. i had accidently set preferred network type to unknown by going in secret setting by using the code *#*#4636#*#* in my Micromax A54 and now my real imei number is changed into 00000000. My mobile is not recognizing any sim and on notification bar it says ''searching for service''. I am not able to reset previous setting i.e. unknown to gsm auto(prl) or gsm only or wcdma only. Please help me how can i resolve my problem.
Your help will be appreciated. thnx in advance..
hi i have samsung note2 my network show unknow but every thing is ok call sms is fine how to i fix it to my network when i restart it they show gprs but when i call some one they going to unknow
Turns out the device has two SIM card slots - one strictly for GSM, another with WCDMA support. If this is the same for you, change SIMcard slot and the preferred network type will change
legend221 said:
I'm noticing most of us are on the AT&T Network, yet there are those that do not want or need 3G/3.5G and want to use 2G or have another carrier so they cant take advantage of the speeds because they are on a Network such as T-Mobile.
Obviously someone using primarily or mainly 2G will see significantly more battery life.
This is good for someone that rarely uses data service or goes online using WIFI for the most part.
To change or edit your Preferred Network type go to your Phone app
then enter the following: *#*#4636#*#*
>Phone Information
>Set Preferred Network Type
Now you are able to change and edit the way your phone looks for and uses the Network you are currently on.
The Terms are explained below:
Preferred Network Types change the type of frequency the phone searches for.
Android is used on several devices that can gain access to different cell carriers.
For simplicity, there are two main types of cell carriers, GSM and CDMA.
The following popular data communication technology is associated with each cell carrier type:
GSM = GPRS (2g), EDGE(2g), UMTS(3g), WCDMA(3g), HSDPA(3g) {Cell Carrier examples: AT&T and T-Mobile}
CDMA = CDMA*(2/3g) EV-DO(3g) WiMax(3/4g) {Cell Carrier examples: Verizon and Sprint}
Now that the general stuff is out of the way, here's my take on the Preferred Network types:
WCDMA preferred - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 3G is favored more.
GSM only - The GSM phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
WCDMA only - The GSM phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM auto (PRL) - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more. This one is a bit confusing to me since PRL is associated mostly with CDMA technology and not GSM technology.
CDMA auto (PRL) - The CDMA phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more.
CDMA only - The CDMA phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
EvDo only - The CDMA phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM/CDMA auto (PRL) - Some phones are equipped with both GSM and CDMA capabilities. This setting appears to just have the phone attempt to stay connected to the data communication type that works the best.
Unknown - If none of the above fit or the phone is acting weird as far as connecting to the carrier, you will see your preferred network type is set to this
When using the 'only' options you should still be able to make calls.
To put things into perspective, The Nexus One is set to WCDMA preferred as default and the Droid Incredible is set to CDMA auto (PRL).
Click to expand...
Click to collapse
Hi, here's a tutorial on how to change network modes using AT commands: http://www.josemauricio.net/?p=486
When i try to change my network it automatic changes to wcdma preferred.
When i try to change my network it automatic changes to wcdma preferred

lock your infuse to cdma

Dial *#*#4636#*#* go into phone information scroll down and choose wcdma only and your done default is GSM/WCDMA auto (PRL)
samsungcaptivates said:
Dial *#*#4636#*#* go into phone information scroll down and choose wcdma only and your done default is GSM/WCDMA auto (PRL)
Click to expand...
Click to collapse
please excuse my ignorance, but what would be the purpose of this?
so that it dosent jump around from 3g 2g if its auto and your not using data it automatically defaults to 2g i think to save battery then switches to 3g oir hsdpa 3.5g or what att calls 4g on demand this keeps it locked on wcdma or 4g to my knowledge
samsungcaptivates said:
so that it dosent jump around from 3g 2g if its auto and your not using data it automatically defaults to 2g i think to save battery then switches to 3g oir hsdpa 3.5g or what att calls 4g on demand this keeps it locked on wcdma or 4g to my knowledge
Click to expand...
Click to collapse
seems like it reverts back to auto after a reboot
This makes the phone work on Verizon, right?
MikeyMike01 said:
This makes the phone work on Verizon, right?
Click to expand...
Click to collapse
See that's what I thought too. ATT = GSM, Verizon/Sprint = CDMA.
kwaalude said:
seems like it reverts back to auto after a reboot
Click to expand...
Click to collapse
Mine goes back to auto as soon as I back out of the menu. Am I doing something wrong by using the back button?
wouldn't this, by locking it, render the phone useless when traveling out of area that support that network?
MikeyMike01 said:
This makes the phone work on Verizon, right?
Click to expand...
Click to collapse
roflmao 10char
vbanh said:
Mine goes back to auto as soon as I back out of the menu. Am I doing something wrong by using the back button?
Click to expand...
Click to collapse
Mine does the same thing. did you figure out how to do it? I have been trying but I couldn't do it
I found this here in the forum someone posted and it worked for me thanks for him.
champoux said:
Here's an alternate method I puzzled out (and then afterward discovered it was already posted in thread 751237. It's a bit faster and has the advantage of surviving flight mode; still gets reset upon restart.
Dial *#*#2263#*#* (mnemonic: *#*#BAND#*#*).
This brings up the Band selection menu which you can also access from the above method by dialing *#*#197328640#*#* then going into DEBUG SCREEN > PHONE CONTROL > NETWORK CONTROL.
Select [3] GSM BAND
Select [1] GSM ALL
Select "Select GSM All Bands"
Menu key > END
To switch back, go to *#*#2263#*#* and select [1] AUTOMATIC > Select GSM &WCDMA All Bands > Menu key > END.
Something else I'm trying out is switching the acquisition order so when it is in "dual" mode, it'll try GSM first. Even so, it will still switch to 3g if there's enough signal. Seems to help keep it on 2G though, when it would otherwise cling to a faint 3g signal with 0-1 bars.
To do that, go into the NETWORK CONTROL menu (see above) then
Select [4] AQUISITION ORDER (yes they misspelled it)
Select [2] GSM->UMTS
Select "Select ACQ_ORDER_GSM_FIRST" (at least they abbreviated it correctly)
Menu key > END
This option does not get reset upon phone restart.
Click to expand...
Click to collapse
I did this and now my sms or text messaging don't work help
I had this happen too, but I didn't use the above method. Don't know what happened, but when I checked message settings, I had no number under "Message Center" did a quick google search and found an ATT number "+13123149810"...now it works again.
Did u call the number
Never mind i fixed it.but now in my network type it says umts is that faster then hsdpa and are there any other number sequences i can use to tweak my phone
I'm getting RAT restricted, which I got on my Vibrant but never my Captivate...
How can I change to show the different bands?
Sent from my Samsung Infuse 4G
wcdma and cdma have nothing to do with each other. wcdma is also known as umts, the base part of 3g (and 4g when hspa+). hspa is a protocol that runs on top of this cell technology providing higher data speeds. gprs (known as edge, and some times called gsm) is 2g. you can turn one or another off so the phone does not seek and connect to both services, which could save battery life. even though ive yet to see my phone find less than 3g/4g in houston, i still dont turn it off, just in case.
The Jack of Clubs said:
wcdma and cdma have nothing to do with each other. wcdma is also known as umts, the base part of 3g (and 4g when hspa+). hspa is a protocol that runs on top of this cell technology providing higher data speeds. gprs (known as edge, and some times called gsm) is 2g. you can turn one or another off so the phone does not seek and connect to both services, which could save battery life. even though ive yet to see my phone find less than 3g/4g in houston, i still dont turn it off, just in case.
Click to expand...
Click to collapse
Thanks, John Madden.

How to Fix AT&T Data Throttle Your 4G - Your Data Usage is Among The Top 5% Of Users

How to Fix AT&T Data Throttle Your 4G - Your Data Usage is Among The Top 5% Of Users
There is a nice little APN fix. Just change the APN to Phone and force your phone to use HSPA in your phone's settings. I have instructions with a screenshot...
http://www.traemcneely.com/2011/12/...rottle-4g-data-anti-throttling-trick-for-att/
How do you perform the first step on the skyrocket?
1. Go to Settings > Wireless and Network > Mobile Networks > Click Network Mode and force your phone to use GSM/HSPA (Auto mode).
I don't see "network mode".
Click Access Point Name..
I am now getting 512k vs 150k.
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Found another trick.
I named the access point the same ATT pta, then I put Phone under the APN setting.
Put your phone into GSM/HSPA (auto mode) let it connect to the network,
then go back and put it as HSPA only.....I'm getting 1-2g+ bypassing the throttle using HSPA+ works like a charm.
Att Throttle Samsung Skyrocket
i did all when i click on Mobile networks i see access point names and network operators and use packet data. When i click on network operators is says Default setup doesnt allow me to do anything. Please help
Same here. Don't see 'network.mode' selection. Please help. Does it have to be rooted?
Sent from my SAMSUNG-SGH-I727 using XDA App
I understand there are alot of threds pertaing to this throttling issue. I was given a warning text from att about a week ago now when ever i run my speed test i am only getting around 50kbs thats crazy. I live in pittsburgh which is not an LTE area yet am i screwed? or is there a work around for me????????
there is no network mode on a stock rom.. i posted workarounds on another thread which I started but can't find link now on my phone.. check my profile for my posts
Sent from my SAMSUNG-SGH-I727 using xda premium
*#*#4635#*#*
ajdrausal said:
*#*#4635#*#*
Click to expand...
Click to collapse
*#*#4636#*#*
---------- Post added at 11:36 PM ---------- Previous post was at 11:17 PM ----------
I am still not sure where/how to pick "GSM/HSPA (Auto mode)" on stock rom. Thats not an option.
What I have are:
WCDMA preferred - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 3G is favored more.
GSM only - The GSM phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
WCDMA only - The GSM phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM auto (PRL) - The GSM phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more. This one is a bit confusing to me since PRL is associated mostly with CDMA technology and not GSM technology.
CDMA auto (PRL) - The CDMA phone is capable of using both 2G and 3G data communication and when signal strength is low 2G is favored more.
CDMA only - The CDMA phone is capable of using only 2G data communication. When the 2G signal is too low you get nothing at all.
EvDo only - The CDMA phone is capable of using only 3G data communication. When the 3G signal is too low you get nothing at all.
GSM/CDMA auto (PRL) - Some phones are equipped with both GSM and CDMA capabilities. This setting appears to just have the phone attempt to stay connected to the data communication type that works the best. (Maybe the Samsung Galaxy S will take advantage of this???)
Unknown - If none of the above fit or the phone is acting weird as far as connecting to the carrier, you will see your preferred network type is set to this
(Cut n paste from another thread, dont know if these are applicable to Skyrocket/LTE)
http://forum.xda-developers.com/showthread.php?t=1342111
Thanks for the pointer to the thread but my whole point is that I dont see those options and for some reason my network mode changes dont stick.
So if I disable packet network, switch the APN, change the network mode and then enable the network again, I see that it has gone back to GSM?WCDMA/LTE auto mode again.
So for some reason my network mode changes dont stick. Also, I am on stock rom, could that be the reason!
activemind said:
Thanks for the pointer to the thread but my whole point is that I dont see those options and for some reason my network mode changes dont stick.
So if I disable packet network, switch the APN, change the network mode and then enable the network again, I see that it has gone back to GSM?WCDMA/LTE auto mode again.
So for some reason my network mode changes dont stick. Also, I am on stock rom, could that be the reason!
Click to expand...
Click to collapse
Custom ROMS give you the options you are looking for.
I am confused ! If the stock radio is *locked* to use LTE if available, why are some people reporting to lock onto HSPA+ network with stock ROM. Are they exploiting some bug?
I have tried various things but I cant switch my radio to anything except GSM/WCDMA/LTE auto mode. It seems to come back to that mode.
Do I need a reboot after changing the mode.
I am using *#*4636#*#* to switch the mode.
Switching APN 's worked like a charm ;o)
TE TOQUE said:
Switching APN 's worked like a charm ;o)
Click to expand...
Click to collapse
Over a year since last post and you decide to necro for no good reason smh.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2

[Q] Nexus S is not getting Mobile network(GSM) signal

Hi All,
I got a Nexus S (I9020T) from US. I am trying to use it in India with a GSM carrier - BSNL ( gsm 900Mhz).
Problem :
When ever I am inserting GSM Sim, it catches the signal (both gsm + data) but after 3-5 minutes only gsm signal is lost. I cannot make or receive calls, it says emergency call only.
I tried to make call, it says "no mobile network available". Where as i could surf the net with 3g data plan.
what I did :
1) I tried to reboot the phone. Still no signal.
2) I tried to remove battery and sim , and put it back and switch on. Still no signal.
3) I tried to dial *#*#4636#*#* . Enter into phone information-->Select preferred network type to - WCDMA preferred, GSM only (all GSM options tried)
and reboot the phone. Still no help.
Please help me. I am completely frustrated.
Regards,
Rajesh
Contact your provider , they might be blocking your device for some reason ...
Have you added the new APN?
(I'm assuming you're on 4.0)
Settings --> More... --> Mobile networks --> Access Point Names --> Press menu button and select "New APN"
Google the APN settings for your provider and input them. Make sure you remember to press menu and SAVE APN when your finished.
krymson0 said:
Have you added the new APN?
(I'm assuming you're on 4.0)
Settings --> More... --> Mobile networks --> Access Point Names --> Press menu button and select "New APN"
Google the APN settings for your provider and input them. Make sure you remember to press menu and SAVE APN when your finished.
Click to expand...
Click to collapse
Im in the same boat tried to set apn wont save no matter what i do. please help.
Hi
krymson0 said:
Have you added the new APN?
(I'm assuming you're on 4.0)
Settings --> More... --> Mobile networks --> Access Point Names --> Press menu button and select "New APN"
Google the APN settings for your provider and input them. Make sure you remember to press menu and SAVE APN when your finished.
Click to expand...
Click to collapse
Hi,
Thanks for reply..
Yes, I added APN..(it automatically appeared) and also I am able to surf the net due to 3G data plan, but strangely i am not able to make any calls nor receive any calls, it says no mobile network available
What is the version of your baseband? You can check it in Settings/About or in Fastboot/Bootloader mode.
What is the model written beneath your battery on the sticker?
anglergab said:
What is the version of your baseband? You can check it in Settings/About or in Fastboot/Bootloader mode.
What is the model written beneath your battery on the sticker?
Click to expand...
Click to collapse
Hi, baseband version - I9020XXKI1
Kernel Version - 3.0.8-g6656123
model -I9020T
The baseband is OK. It supports 900 MHz operation. You should contact your operator regarding this issue, it can happen they use special/non-standard GSM solutions (frequency sets, etc.) which is not supported by this phone.
You can try switching to 2G mode only (you can find this in Settings/Mobile networks).
You should check in this mode the signal in Settings/About/Status (in dBm).
If it's below -100 dBm then signal coverage is poor or unsupported frequencies are used by your operator or your HW radio chip is corrupted.
To rule out the last possibility, you should check your signal and dBm value with a SIM card from another operator.
UMTS functionality is handled by a separate chip (not by GSM radio), so it can happen 3G is OK but GSM (2G) not.
Hi
anglergab said:
The baseband is OK. It supports 900 MHz operation. You should contact your operator regarding this issue, it can happen they use special/non-standard GSM solutions (frequency sets, etc.) which is not supported by this phone.
You can try switching to 2G mode only (you can find this in Settings/Mobile networks).
You should check in this mode the signal in Settings/About/Status (in dBm).
If it's below -100 dBm then signal coverage is poor or unsupported frequencies are used by your operator or your HW radio chip is corrupted.
To rule out the last possibility, you should check your signal and dBm value with a SIM card from another operator.
UMTS functionality is handled by a separate chip (not by GSM radio), so it can happen 3G is OK but GSM (2G) not.
Click to expand...
Click to collapse
Thanks for reply..n helping me out.
I believe my carrier BSNL uses standard GSM frequencies..samsung note, galaxy series pretty much work with it.
I tried switching to 2G mode, same problem.
I checked signal strength : it varies from -91dBm to -93dBm.
I inserted other GSM carrier SIM , same problem - no signal.
This Nexus S mobile was working fine with T-mobile when I was in USA.
It seems some Hardware radio incompatibility or something else..God Knows!!
Hi
Rajeshandroid said:
Thanks for reply..n helping me out.
I believe my carrier BSNL uses standard GSM frequencies..samsung note, galaxy series pretty much work with it.
I tried switching to 2G mode, same problem.
I checked signal strength : it varies from -91dBm to -93dBm.
I inserted other GSM carrier SIM , same problem - no signal.
This Nexus S mobile was working fine with T-mobile when I was in USA.
It seems some Hardware radio incompatibility or something else..God Knows!!
Click to expand...
Click to collapse
One thing i noted, it identifies the carrier correctly in Settings-->About-->Status-->Network
IMEI(*#06#) shows different from the IMEI written under battery.
Are you using Custom Rom?
Why IMEI difference between device screen and behind battery ? something wrong is here ...
mahanddeem said:
Why IMEI difference between device screen and behind battery ? something wrong is here ...
Click to expand...
Click to collapse
Your /efs is corrupted and some carriers block generic IMEIs, that's where your issue lies
Sent from my ice cream powered Nexus S
Wrong IMEI
Yes my /efs is corrupted. My IMEI shows 004999010640000.
I came to know it happened due to flashing custom ROMs ( Ohh god why did i flash custom ROM) .
I used CWM. This didn't back up my /efs folder and hence the problem.
Its my bad luck, even i did not read any suggestion to back up /efs folder in any guide for flashing custom ROM.
Its really waste of time and effort on my part to go for Android. So much complexity for just a cellphone.
I would better go for iPhone. (Thank God , no custom IOS).
RIP - my Nexus S.
Thanks everybody for helping me and answering me.
The IMEI can be restored, so your Nexus S can be made registered on your operator's network. Instructions to do so can be found, but it can be illegal in your country. Modifying an IMEI is generally is, but if it's done for restoring purposes, then it might not fall in the same category.
Rajeshandroid said:
So much complexity for just a cellphone.
Click to expand...
Click to collapse
The problem with your statement is, that these are not just cellphones, much more minicomputers (with GSM radio and UMTS modem).
Rajeshandroid said:
I would better go for iPhone. (Thank God , no custom IOS).
RIP - my Nexus S.
Click to expand...
Click to collapse
Android is far better customizable and not proprietary software as iOS. Apple can keep its price unrealistically high. They cost far much than their real value. So they are bought not because their usefulness, rather to show other people that one can afford it.

Lg g4 h810 works 2G only

Hi,
I bought this phone Lg G4 h810, it shows AT&T logo whenever i boot it and the problem is despite of network mode on lte/wcdma/gsm/auto it always runs on2G internet speed and shows E sign.
I am from india and many service providers are still not offering4G internet service. But this phone doesn't even runs on wcdma. My previous phone lenovo was nicely running on wcdma and always showed the sign H.
My cellular operator is idea cellular and i had a word with them, they sent me settings and all and help me input the settings manually too, but nothing worked.
I checked even the frequencies, idea cellular is offering UMTS B1(2100) and UMTS B8(900 gsm). I checked this on LG website and these bands are compatible with the phone i bought, but still i can't get anything more than2G. Why so?
Plus there is one more problem, when i switched it on for the first time it showed update available And when i tried to update, it showed error and now always there's an icon on top left corner of phone saying couldn't install system update. I tried restarting and updating the device many times, but it's still the same.
Any help is much appreciated.
Thanks in advance.
Have you put your Company APN?
Yes i did, the company executive even helped me to manually save the settings to run the internet in a 3G mode. But all efforts in vain.
Did you solve the issue?
Anything new? I have the same problem.
I have this problem too
Try hidden menu with *#546368#*810# and under Field Test menu / Modem settings if there is VoLTE on/off chose VoLTE and restart. I have done that and my phone starts working with 4G. Don't forget to set up good APN if it's not automatically set by network provider.
scytalemk said:
Try hidden menu with *#546368#*810# and under Field Test menu / Modem settings if there is VoLTE on/off chose VoLTE and restart. I have done that and my phone starts working with 4G. Don't forget to set up good APN if it's not automatically set by network provider.
Click to expand...
Click to collapse
Hi
Under VoLTE there is another entry named "Session" and in there
RPR(on/off) switch
I enabled it and restarts but it is again on 2g
Anyone further on this issue??
I have this problem too
I was flash the stock firmware,custom firmware customizing the build.prop,changed the settings in the engineering menu *#546368#*810# disconnected volte,changed LTE bands forcibly. Nothing helps,dont work 3G LTE - 2G only(. I realized that I need to re-flash (change) the original QCN file for H810 and re-register IMEI , but I can not find QCN it freely available.
Hello there, i had the same issue. The fix that worked for me was searching for network manuallly and reconnecting again to my carriers LTE network. Worked as a charm. The issue maybe was a brutal handover as I had been travelli g from a city to another one 200 km away. So somehow I had been disconnected from the LTE network and left stranded in the 2g one. Try it it should work

Categories

Resources