Database Info

Stock Recovery zip

Hi, am looking for the stock recovery file/zip p[ease.

The stock recovery is contained in the full firmware download (inside the blob), available on the Asus support site.

_that said:
The stock recovery is contained in the full firmware download (inside the blob), available on the Asus support site.
Click to expand...
Click to collapse
Thanks.

_that said:
The stock recovery is contained in the full firmware download (inside the blob), available on the Asus support site.
Click to expand...
Click to collapse
I got the firmware and extracted the blob, but I only have fastboot, how do I flash it to get stock recovery back?
I tried this:
fastboot -i 0x0B05 flash staging blob
fastboot -i 0x0B05 flash system blob
but nothing works, except I lost /system partition now (I was able to boot Android before). Any help appreciated.

3c said:
I got the firmware and extracted the blob, but I only have fastboot, how do I flash it to get stock recovery back?
I tried this:
fastboot -i 0x0B05 flash staging blob
fastboot -i 0x0B05 flash system blob
but nothing works, except I lost /system partition now (I was able to boot Android before). Any help appreciated.
Click to expand...
Click to collapse
Sorry, if that doesn't work I have no more idea how to fix your locked tablet, if you don't have the blob for wheelie and nvflash.

_that said:
Sorry, if that doesn't work I have no more idea how to fix your locked tablet, if you don't have the blob for wheelie and nvflash.
Click to expand...
Click to collapse
Thanks anyway for helping. All I could figure out is that the blob doesn't actually get written to any partition. I've seen some users be successful doing that (what you suggested), so I'll keep trying, maybe reverting the driver. Wondering if using naked driver works well for such method.
In any case, thanks, and I'll post a reply if I can make it work.

3c said:
Thanks anyway for helping. All I could figure out is that the blob doesn't actually get written to any partition. I've seen some users be successful doing that (what you suggested), so I'll keep trying, maybe reverting the driver. Wondering if using naked driver works well for such method.
In any case, thanks, and I'll post a reply if I can make it work.
Click to expand...
Click to collapse
Try this, download stock recovery here http://www.mediafire.com/download.php?pdipp4h2qyqka63
then execute this:
fastboot -i 0x0B05 flash recovery recovery.blob
boot directly into recovery and see if you have recovery back.

buhohitr said:
Try this, download stock recovery here http://www.mediafire.com/download.php?pdipp4h2qyqka63
then execute this:
fastboot -i 0x0B05 flash recovery recovery.blob
boot directly into recovery and see if you have recovery back.
Click to expand...
Click to collapse
Big progress: blob flashed without a glitch. I was happy until I tried to reboot with fastboot: tablet frozen! Reboot, still no recovery
I guess this is it. Got a nice folding brick now! Will try RMA, but from Cambodia not sure it's worth it. Maybe next month when I'm in France.
Can't believe this happened while tablet is locked! Now I hate Asus for this.

3c said:
Big progress: blob flashed without a glitch. I was happy until I tried to reboot with fastboot: tablet frozen! Reboot, still no recovery
I guess this is it. Got a nice folding brick now! Will try RMA, but from Cambodia not sure it's worth it. Maybe next month when I'm in France.
Can't believe this happened while tablet is locked! Now I hate Asus for this.
Click to expand...
Click to collapse
I have asked you to flash the recovery zip, but once done you should boot directly into the recovery, don't boot up. Let me know if you still can fastboot the recovery to your device, but once done, hold the power until device turn off, then right away hold both power button and volume down button to boot into recovery. If you could do this we still have hope. Once in recovery let me know we can proceed to next step.

buhohitr said:
I have asked you to flash the recovery zip, but once done you should boot directly into the recovery, don't boot up. Let me know if you still can fastboot the recovery to your device, but once done, hold the power until device turn off, then right away hold both power button and volume down button to boot into recovery. If you could do this we still have hope. Once in recovery let me know we can proceed to next step.
Click to expand...
Click to collapse
I cannot actually do anything past flashing a blob. the tablet is "frozen" from the moment it enters fastboot, then after flashing any blobs, any further fastboot command are "non-responsive", here is the actual output. At the end the reboot command succeeds but nothing actually happened on the tablet. Still showing the 4 icons (RCK/Android/USB/WIPE) and the top white text. Tried with original Asus driver, with Google driver and now naked driver. no difference, can only be the tablet ;(
C:\Android\android-sdk\platform-tools>fastboot devices
015d2a5088641a08 fastboot
C:\Android\android-sdk\platform-tools>fastboot -i 0x0B05 flash recovery recovery.blob
sending 'recovery' (6260 KB)...
OKAY [ 1.862s]
writing 'recovery'...
OKAY [ 2.432s]
finished. total time: 4.297s
C:\Android\android-sdk\platform-tools>fastboot reboot-bootloader
rebooting into bootloader...
FAILED (command write failed (Unknown error))
finished. total time: 0.642s
C:\Android\android-sdk\platform-tools>fastboot continue
resuming boot...
FAILED (command write failed (Unknown error))
finished. total time: 0.569s
C:\Android\android-sdk\platform-tools>fastboot reboot
rebooting...
finished. total time: 0.549s
EDIT: Kinda lame I'm sure, but desperate as I am, I tried that too:
C:\Android\android-sdk\platform-tools>fastboot -i 0x0B05 boot recovery.blob
creating boot image...
creating boot image - 6414336 bytes
downloading 'boot.img'...
OKAY [ 1.857s]
booting...
FAILED (remote: ()
finished. total time: 1.861s
I suppose I need a kernel blob... But I couldn't find any stock to flash? Would you also happen to have that handy too?

3c said:
I cannot actually do anything past flashing a blob. the tablet is "frozen" from the moment it enters fastboot, then after flashing any blobs, any further fastboot command are "non-responsive", here is the actual output. At the end the reboot command succeeds but nothing actually happened on the tablet. Still showing the 4 icons (RCK/Android/USB/WIPE) and the top white text. Tried with original Asus driver, with Google driver and now naked driver. no difference, can only be the tablet ;(
C:\Android\android-sdk\platform-tools>fastboot devices
015d2a5088641a08 fastboot
C:\Android\android-sdk\platform-tools>fastboot -i 0x0B05 flash recovery recovery.blob
sending 'recovery' (6260 KB)...
OKAY [ 1.862s]
writing 'recovery'...
OKAY [ 2.432s]
finished. total time: 4.297s
C:\Android\android-sdk\platform-tools>fastboot reboot-bootloader
rebooting into bootloader...
FAILED (command write failed (Unknown error))
finished. total time: 0.642s
C:\Android\android-sdk\platform-tools>fastboot continue
resuming boot...
FAILED (command write failed (Unknown error))
finished. total time: 0.569s
C:\Android\android-sdk\platform-tools>fastboot reboot
rebooting...
finished. total time: 0.549s
EDIT: Kinda lame I'm sure, but desperate as I am, I tried that too:
C:\Android\android-sdk\platform-tools>fastboot -i 0x0B05 boot recovery.blob
creating boot image...
creating boot image - 6414336 bytes
downloading 'boot.img'...
OKAY [ 1.857s]
booting...
FAILED (remote: ()
finished. total time: 1.861s
I suppose I need a kernel blob... But I couldn't find any stock to flash? Would you also happen to have that handy too?
Click to expand...
Click to collapse
Seems like when you flashed the blob file it wipe out everything. But I tried to boot into recovery so it's a good sign that your tablet is not brick ....yet!!
Here is the stock kernel I created for you http://www.mediafire.com/download.php?16fji3z1nghr6th
fastboot -i 0x0B05 flash boot boot.blob
Possible we may need the bootloader too, but will see.

buhohitr said:
Seems like when you flashed the blob file it wipe out everything. But I tried to boot into recovery so it's a good sign that your tablet is not brick ....yet!!
Here is the stock kernel I created for you http://www.mediafire.com/download.php?16fji3z1nghr6th
fastboot -i 0x0B05 flash boot boot.blob
Possible we may need the bootloader too, but will see.
Click to expand...
Click to collapse
I guess I'm ready for bootloader flashing. Either it bricks it for good or it works or else
Nothing has changed. Just to give you more info, booting RCK, results in booting failed - unrecoverable bootloader error (0x000..).
Booting android: cold-booting linux - signature match. Then screen is frozen, but Windows 7 recognize the tablet fine. As if a kernel was there, right?
So I tried flashing boot.blob and recovery.blob and the JB update blob to system again, but it hangs at the end, still have to reboot manually. It's like fastboot is not actually flashing anything, writing in below output is abnormally low or could it be that fast!?: It's the same time for boot, recovery of a 800Mb system file!?
C:\Android\android-sdk\platform-tools>fastboot -i 0x0B05 flash system blob
erasing 'system'...
OKAY [ 2.329s]
sending 'system' (800199 KB)...
OKAY [141.653s]
writing 'system'...
OKAY [ 2.932s]
finished. total time: 146.920s
But the behavior of the bootloader seems quite strange, all this hanging at end of flashing, could this be a corrupted bootloader or worse a corrupted partition table?

3c said:
I guess I'm ready for bootloader flashing. Either it bricks it for good or it works or else
Nothing has changed. Just to give you more info, booting RCK, results in booting failed - unrecoverable bootloader error (0x000..).
Booting android: cold-booting linux - signature match. Then screen is frozen, but Windows 7 recognize the tablet fine. As if a kernel was there, right?
So I tried flashing boot.blob and recovery.blob and the JB update blob to system again, but it hangs at the end, still have to reboot manually. It's like fastboot is not actually flashing anything, writing in below output is abnormally low or could it be that fast!?: It's the same time for boot, recovery of a 800Mb system file!?
C:\Android\android-sdk\platform-tools>fastboot -i 0x0B05 flash system blob
erasing 'system'...
OKAY [ 2.329s]
sending 'system' (800199 KB)...
OKAY [141.653s]
writing 'system'...
OKAY [ 2.932s]
finished. total time: 146.920s
But the behavior of the bootloader seems quite strange, all this hanging at end of flashing, could this be a corrupted bootloader or worse a corrupted partition table?
Click to expand...
Click to collapse
Let try the bootloader http://www.mediafire.com/download.php?u6bwnaao6khcdaf

3c said:
Then screen is frozen, but Windows 7 recognize the tablet fine. As if a kernel was there, right?
Click to expand...
Click to collapse
Define "Windows recognizes the tablet". If you have ADB access, you should be able to recover.

buhohitr said:
Let try the bootloader http://www.mediafire.com/download.php?u6bwnaao6khcdaf
Click to expand...
Click to collapse
Actually how do you flash bootloader? I did this: fastboot -i 0x0B05 flash bootloader loader.blob ?
But anyway, I just read fastboot doesn't flash anything when device is locked! So this piece of s**t doesn't flash but will erase any partition you wish! How's that for a crappy software! I wish I never tried to update to JB!
_that said:
Define "Windows recognizes the tablet". If you have ADB access, you should be able to recover.
Click to expand...
Click to collapse
No ADB, just the name of the tablet appears in Device Manager, sort of the SD card access, but no actual access. I updated the driver manually and was proposed some MTP device. No adb or fastboot when this is available.
Here is the input from another thread: I copy it because I believe the information is very important and identify another way to brick the TF700:
Pretoriano80 said:
ICS bootloader had the fastboot option disabled if the device's bootloader was still locked and the USB icon wasn't showing at all.
With the JB bootloader Asus made the USB icon available even if the device was locked so you can access fastboot mode but you can't flash anything (yes,it doesn't make sense, but this is Asus).
Anyway, if you are able to boot in recovery you should be able to restore you device easily,just follow my guide from the general forum.
Click to expand...
Click to collapse
That's exactly what's happening! I can go in fastboot, but it doesn't flash anything! Though it erase any partition you wish! How smart is that? So I have one thing to say to locked owner: never go in fastboot, ever, it's useless and can actually brick your tablet!!!
I bricked the tablet on my own sure enough, but without this ridiculous fastboot I wouldn't have been able to mess up the tablet in the first place! Sorry for those who love their tablet and Asus, but I find their strategy ridiculous. Except if it's main goal is to make money on RMA.
Thanks Asus for this nice brick!

3c said:
But anyway, I just read fastboot doesn't flash anything when device is locked! So this piece of s**t doesn't flash but will erase any partition you wish!
Click to expand...
Click to collapse
I'd still expect the locked bootloader to flash correctly signed blobs. But who knows what Asus were thinking...
One more idea you can try: Get the 10.4.4.23 dlpkgfile and extract the blob from there.
This blob contains the 10.4.4.23 bootloader, stock recovery and stock kernel, and an orignal Asus signature. My WW version is 13573093 bytes, so it is much smaller than the full firmware blob - try to flash that via fastboot, maybe you are lucky and it works.

_that said:
I'd still expect the locked bootloader to flash correctly signed blobs. But who knows what Asus were thinking...
One more idea you can try: Get the 10.4.4.23 dlpkgfile and extract the blob from there.
This blob contains the 10.4.4.23 bootloader, stock recovery and stock kernel, and an orignal Asus signature. My WW version is 13573093 bytes, so it is much smaller than the full firmware blob - try to flash that via fastboot, maybe you are lucky and it works.
Click to expand...
Click to collapse
Will do, thanks. How would you flash such blob? Onto "staging" or "system"? I've seen users flash the JB update blob to system and be successful. Also seen some posts mentioning staging?

3c said:
Will do, thanks. How would you flash such blob? Onto "staging" or "system"? I've seen users flash the JB update blob to system and be successful. Also seen some posts mentioning staging?
Click to expand...
Click to collapse
I don't really know - all I know is:
- TF700's fastboot implementation only supports blobs, no raw partition images
- blobs are usually always written to the staging partition first, then the contained partition images are flashed to the correct partition(s) by the bootloader
I've seen both variants of the fastboot command, so maybe the target partition doesn't matter when sending blobs. I'd try staging first.

Unrecoverable bootloader error but not Bricked!

So I unlocked my tf300t and flashed cwm to recovery.
Everything seemed to go fine.
When I would go into cwm it was not able to mount or access any other part of my tab. I figured ok erase/format the recovery partition and try TWRP. So I booted to the bootloader, using fastboot I erased recovery but now whenever I go to flash a new recovery my bootloader either freezes or I get an Unrecoverable bootloader error 0x00000000 (not sure if thats the right amount of zeros but there are no other digits in the error code.) I can access fastboot and adb but it doesn't seem like I can flash using fastboot and I just don't feel comfortable trying with adb. Also I can access fastboot only from the bootloader screen and adb only after I boot into my current rom (stock 4.2.1)
I guess my questions are this:
How can I format my recovery or flash a new recovery?
Were the mount issues I originally encountered going to be solved with a new recovery?
Please help!

Have you tried installing stock rom (from Asus support page) using Fastboot? It should also put stock recovery in your tablet.
Not sure if it is going to work, but it's worth trying though.

1st this is not for the dev section. You should ask questions in the Q&A section.
Go to Asus and dl the latest Stock. Unzipp it 2 times. You should have a blob file now in the extracted folder. put this blob in your fastboot folder.
Open cmd and type:
fastboot -i 0x0B05 flash staging blob
let it run. It seems that nothing is happening for about 5 Minutes. The whole thing can take up to 20 Minutes, so just stay calm and wait till its finished.
Now you should be back to full Stock with Stock recovery.

mikaole said:
1st this is not for the dev section. You should ask questions in the Q&A section.
Go to Asus and dl the latest Stock. Unzipp it 2 times. You should have a blob file now in the extracted folder. put this blob in your fastboot folder.
Open cmd and type:
fastboot -i 0x0B05 flash staging blob
let it run. It seems that nothing is happening for about 5 Minutes. The whole thing can take up to 20 Minutes, so just stay calm and wait till its finished.
Now you should be back to full Stock with Stock recovery.
Click to expand...
Click to collapse
I had this problem too. But on 4.2.1 you can push file blob, and then it's can't run because stock recovery dead.

Were you able to fix the stock recovery issue?

cdguider said:
Were you able to fix the stock recovery issue?
Click to expand...
Click to collapse
Thant i would like to know aswell
Pls

No, I was not. I also have the unrecoverable bootloader error but I have a working device. I downloaded the latest firmware, followed the steps through fastboot and the same thing keeps happening where as soon as you try to enter a command through fastboot the green box stops flashing over rck and even though the cmd prompt window tells you something is going on nothing happens on the tablet end. It freezes. hard reboot and you end up back with a normal working device, no changes and a corrupt bootloader.

lomoski said:
No, I was not. I also have the unrecoverable bootloader error but I have a working device. I downloaded the latest firmware, followed the steps through fastboot and the same thing keeps happening where as soon as you try to enter a command through fastboot the green box stops flashing over rck and even though the cmd prompt window tells you something is going on nothing happens on the tablet end. It freezes. hard reboot and you end up back with a normal working device, no changes and a corrupt bootloader.
Click to expand...
Click to collapse
I have same issue.. has anybody managed to get a fix for this?

I've same problem, how can i fix it?
i've a working device but without recovery mod! I can't flash anything via fastboot because it freezes, i always have "Unrecoverable bootloader error" when press RCK.
Can somebody help me?
Thanks in advance

mister363 said:
I've same problem, how can i fix it?
i've a working device but without recovery mod! I can't flash anything via fastboot because it freezes, i always have "Unrecoverable bootloader error" when press RCK.
Can somebody help me?
Thanks in advance
Click to expand...
Click to collapse
I was having this problem earlier - a new bootloader came out when they went to 4.2, but most of the instructions online don't reflect this. You need an updated recovery image, which usually has the name recovery-jb.img instead of recovery.img. When you're searching make sure the instructions mention 4.2 and jelly bean.
However, I've only managed to get one step further - have now get into clockworkmod recovery, but as with the OP I then couldn't mount anything inside CWM. I tried another instruction set which involved unzipping the ROM and using adb to push over the .blob. This hasn't worked and I have now got a pretty much bricked device - it either bootloops on the asus splash screen, or loads into CWM.
I've found that even when youre in CWM you can type "adb reboot-bootloader" into the terminal, which forces the RCK/android/wipe data page and fastbook to appear. I've also tried to download the latest stock firmware from ASUS, unzipped it to get the stock .blob out and into my fastboot directory, then run "fastboot -i 0x0B05 flash staging blob" in the terminal, as per mikaole's suggestion. This takes a while to push over the 80mb .blob, but after it says it's staged it says "done" then nothing happens and it's still bricked. hmm.

No one's figured this out? I tried flashing the blob file and my system won't boot at all

My solution
I have the same on my TF300t and A700 - but it seems i just managed to get my TF300t back
i tried all fastboot (reflashing recovery, boot, system etc) no dice - especially since writing system was done after 3 secs all the time.
Here how i restored my TF300T JB
download your appropriate lates firmware from Asus (WW, US etc.) and extract the zip twice so you have your blob file
install your device drivers if needed (i used Google SDK ones) (and as a Tip Win8 sucks for Fastboot stuff so try to get Win7 Vista XP for this)
Reset your device with a paperclip/needle (about 2 cm down of your sdcard slot) and hold vol-down to enter fastboot
(the folowing i did at least 10 times already but didn't erase misc)
fastboot erase system
fastboot erase recovery
fastboot erase userdata
fastboot erase boot
fastboot erase misc
fastboot erase cache
fastboot -i 0x0B05 flash system c:\adb\TF300t\blob (this is my path - your's may vary depending where you stored your blob) ((also this was the first time i saw the loading bar while flashing)*
fastboot -i 0x0B05 reboot
* it also took a lot longer as it should:
C:\>fastboot -i 0x0B05 flash system c:\adb\TF300t\blob
erasing 'system'...
OKAY [ 1.695s]
sending 'system' (800935 KB)...
OKAY [133.121s]
writing 'system'...
OKAY [153.973s]
finished. total time: 288.789s
im now setting my tab up to get back to CM (which initially caused this sh1theap due to autoupdate error, same as my A700 got bricked )
hope i could help you out!
cheers
-Buster

IT WORKS!!!
Buster99 said:
fastboot erase system
fastboot erase recovery
fastboot erase userdata
fastboot erase boot
fastboot erase misc
fastboot erase cache
fastboot -i 0x0B05 flash system c:\adb\TF300t\blob (this is my path - your's may vary depending where you stored your blob) ((also this was the first time i saw the loading bar while flashing)*
fastboot -i 0x0B05 reboot
Click to expand...
Click to collapse
Thank you very much. It works beautifully.

Buster99 said:
I have the same on my TF300t and A700 - but it seems i just managed to get my TF300t back
i tried all fastboot (reflashing recovery, boot, system etc) no dice - especially since writing system was done after 3 secs all the time.
Here how i restored my TF300T JB
download your appropriate lates firmware from Asus (WW, US etc.) and extract the zip twice so you have your blob file
install your device drivers if needed (i used Google SDK ones) (and as a Tip Win8 sucks for Fastboot stuff so try to get Win7 Vista XP for this)
Reset your device with a paperclip/needle (about 2 cm down of your sdcard slot) and hold vol-down to enter fastboot
(the folowing i did at least 10 times already but didn't erase misc)
fastboot erase system
fastboot erase recovery
fastboot erase userdata
fastboot erase boot
fastboot erase misc
fastboot erase cache
fastboot -i 0x0B05 flash system c:\adb\TF300t\blob (this is my path - your's may vary depending where you stored your blob) ((also this was the first time i saw the loading bar while flashing)*
fastboot -i 0x0B05 reboot
* it also took a lot longer as it should:
C:\>fastboot -i 0x0B05 flash system c:\adb\TF300t\blob
erasing 'system'...
OKAY [ 1.695s]
sending 'system' (800935 KB)...
OKAY [133.121s]
writing 'system'...
OKAY [153.973s]
finished. total time: 288.789s
im now setting my tab up to get back to CM (which initially caused this sh1theap due to autoupdate error, same as my A700 got bricked )
hope i could help you out!
cheers
-Buster
Click to expand...
Click to collapse
Now i' m busy because of my Job. But next week i want try your method.
I hope it work for my device!
Inviato dal mio GT-I9100 con Tapatalk 2

Buster99 said:
I have the same on my TF300t and A700 - but it seems i just managed to get my TF300t back
i tried all fastboot (reflashing recovery, boot, system etc) no dice - especially since writing system was done after 3 secs all the time.
Here how i restored my TF300T JB
download your appropriate lates firmware from Asus (WW, US etc.) and extract the zip twice so you have your blob file
install your device drivers if needed (i used Google SDK ones) (and as a Tip Win8 sucks for Fastboot stuff so try to get Win7 Vista XP for this)
Reset your device with a paperclip/needle (about 2 cm down of your sdcard slot) and hold vol-down to enter fastboot
(the folowing i did at least 10 times already but didn't erase misc)
fastboot erase system
fastboot erase recovery
fastboot erase userdata
fastboot erase boot
fastboot erase misc
fastboot erase cache
fastboot -i 0x0B05 flash system c:\adb\TF300t\blob (this is my path - your's may vary depending where you stored your blob) ((also this was the first time i saw the loading bar while flashing)*
fastboot -i 0x0B05 reboot
* it also took a lot longer as it should:
C:\>fastboot -i 0x0B05 flash system c:\adb\TF300t\blob
erasing 'system'...
OKAY [ 1.695s]
sending 'system' (800935 KB)...
OKAY [133.121s]
writing 'system'...
OKAY [153.973s]
finished. total time: 288.789s
im now setting my tab up to get back to CM (which initially caused this sh1theap due to autoupdate error, same as my A700 got bricked )
hope i could help you out!
cheers
-Buster
Click to expand...
Click to collapse
Did your tablet seem to freeze after flashing via fastboot? When I push blob, the console shows that it wrote, but then fastboot on the tablet freezes & I have to manually reboot, putting me right back to the drawing board.
Sent from my HTC One using xda app-developers app

Until now my device freezes. Fastboot seem to work but nothing happens. :banghead:
Inviato dal mio GT-I9100 con Tapatalk 2

P05TMAN said:
Did your tablet seem to freeze after flashing via fastboot? When I push blob, the console shows that it wrote, but then fastboot on the tablet freezes & I have to manually reboot, putting me right back to the drawing board.
Sent from my HTC One using xda app-developers app
Click to expand...
Click to collapse
nope. do you use the original cable on usb 2.0 and connected to your pc not a usb hub? should work. if not try a diffrent pc - sometimes usb chipsets make problems.

Buster99 said:
nope. do you use the original cable on usb 2.0 and connected to your pc not a usb hub? should work. if not try a diffrent pc - sometimes usb chipsets make problems.
Click to expand...
Click to collapse
I get invalid argument to all of the erase attempts and the minute I try to push the blob the flashing green icon in fastboot mode on the tablet stops. The command windows says the flash went fine but the tablet is unresponsive and must be reset. Infact any fastboot command that pushed something to the tablet causes it to look up ( indicated by the green flashing RCK icon freezing on whatever phase of green it had at the time)
E:\asus>fastboot -i 0x0B05 flash system e:\asus\blob
erasing 'system'...
OKAY [ 1.975s]
sending 'system' (800935 KB)...
OKAY [134.565s]
writing 'system'...
OKAY [ 2.040s]
finished. total time: 138.583s
I think its time to bin this doorstop and break something new

d3fiant said:
I get invalid argument to all of the erase attempts and the minute I try to push the blob the flashing green icon in fastboot mode on the tablet stops. The command windows says the flash went fine but the tablet is unresponsive and must be reset. Infact any fastboot command that pushed something to the tablet causes it to look up ( indicated by the green flashing RCK icon freezing on whatever phase of green it had at the time)
E:\asus>fastboot -i 0x0B05 flash system e:\asus\blob
erasing 'system'...
OKAY [ 1.975s]
sending 'system' (800935 KB)...
OKAY [134.565s]
writing 'system'...
OKAY [ 2.040s]
finished. total time: 138.583s
I think its time to bin this doorstop and break something new
Click to expand...
Click to collapse
Mine does this same thing.....think it's done for?
Sent from my HTC One using xda app-developers app

Buster99, your instructions saved my device. I missed erasing /misc even though you put it in the directions and my tablet's back! I owe you.

[Q] HELP! Bricked ASUS TF300T

I have an Asus TF300T paperweight!
I started out to root my tablet and load CWM. I unlocked it, install TWRP v2.2.2.2 as I read in a blog with instructions on how to root this tablet. I loaded a CWM ROM, can't remember not which. It didn't load correctly, and kept rebooting. I got into the screen that gives the following four options:
1. RCK
2. Android icon
3. USB icon
4. Wipe data icon
Of course, thinking I would start over and try again, selected Wipe Data. Stupid, I know.
Now, my tablet only boots into TWRP. It won't mount anything; of course, since I Wiped Data, there is nothing to mount. I have tried and searched, to no avail. I can see the tablet in Device Manager, and managed to load the Naked Universal Drivers. Now it shows up in Device Manager as Asus Eee Pad Slider ADB Interface. I can issue the command - adb reboot - and it will reboot, but I can't get it to do anything else meaningful with my meager experience.
Any help would be greatly appreciated. I would like to get this working and give it to my son, as I have already purchased a replacement for myself.
Thank you.

dhastings said:
I have an Asus TF300T paperweight!
I started out to root my tablet and load CWM. I unlocked it, install TWRP v2.2.2.2 as I read in a blog with instructions on how to root this tablet. I loaded a CWM ROM, can't remember not which. It didn't load correctly, and kept rebooting. I got into the screen that gives the following four options:
1. RCK
2. Android icon
3. USB icon
4. Wipe data icon
Of course, thinking I would start over and try again, selected Wipe Data. Stupid, I know.
Now, my tablet only boots into TWRP. It won't mount anything; of course, since I Wiped Data, there is nothing to mount. I have tried and searched, to no avail. I can see the tablet in Device Manager, and managed to load the Naked Universal Drivers. Now it shows up in Device Manager as Asus Eee Pad Slider ADB Interface. I can issue the command - adb reboot - and it will reboot, but I can't get it to do anything else meaningful with my meager experience.
Any help would be greatly appreciated. I would like to get this working and give it to my son, as I have already purchased a replacement for myself.
Thank you.
Click to expand...
Click to collapse
Stop.
Find buster's post and thank him.
And make sure you keep twrp up to date. You have an extremely old versioin which is why you bricked.

I have the same on my TF300t and A700 - but it seems i just managed to get my TF300t back
i tried all fastboot (reflashing recovery, boot, system etc) no dice - especially since writing system was done after 3 secs all the time.
Here how i restored my TF300T JB
download your appropriate lates firmware from Asus (WW, US etc.) and extract the zip twice so you have your blob file
install your device drivers if needed (i used Google SDK ones) (and as a Tip Win8 sucks for Fastboot stuff so try to get Win7 Vista XP for this)
Reset your device with a paperclip/needle (about 2 cm down of your sdcard slot) and hold vol-down to enter fastboot
(the folowing i did at least 10 times already but didn't erase misc)
fastboot erase system
fastboot erase recovery
fastboot erase userdata
fastboot erase boot
fastboot erase misc
fastboot erase cache
fastboot -i 0x0B05 flash system c:\adb\TF300t\blob (this is my path - your's may vary depending where you stored your blob) ((also this was the first time i saw the loading bar while flashing)*
fastboot -i 0x0B05 reboot
* it also took a lot longer as it should:
C:\>fastboot -i 0x0B05 flash system c:\adb\TF300t\blob
erasing 'system'...
OKAY [ 1.695s]
sending 'system' (800935 KB)...
OKAY [133.121s]
writing 'system'...
OKAY [153.973s]
finished. total time: 288.789s
im now setting my tab up to get back to CM (which initially caused this sh1theap due to autoupdate error, same as my A700 got bricked )
hope i could help you out!
cheers
-Buster

sbdags said:
I have the same on my TF300t and A700 - but it seems i just managed to get my TF300t back
i tried all fastboot (reflashing recovery, boot, system etc) no dice - especially since writing system was done after 3 secs all the time.
Here how i restored my TF300T JB
download your appropriate lates firmware from Asus (WW, US etc.) and extract the zip twice so you have your blob file
install your device drivers if needed (i used Google SDK ones) (and as a Tip Win8 sucks for Fastboot stuff so try to get Win7 Vista XP for this)
Reset your device with a paperclip/needle (about 2 cm down of your sdcard slot) and hold vol-down to enter fastboot
(the folowing i did at least 10 times already but didn't erase misc)
fastboot erase system
fastboot erase recovery
fastboot erase userdata
fastboot erase boot
fastboot erase misc
fastboot erase cache
fastboot -i 0x0B05 flash system c:\adb\TF300t\blob (this is my path - your's may vary depending where you stored your blob) ((also this was the first time i saw the loading bar while flashing)*
fastboot -i 0x0B05 reboot
* it also took a lot longer as it should:
C:\>fastboot -i 0x0B05 flash system c:\adb\TF300t\blob
erasing 'system'...
OKAY [ 1.695s]
sending 'system' (800935 KB)...
OKAY [133.121s]
writing 'system'...
OKAY [153.973s]
finished. total time: 288.789s
im now setting my tab up to get back to CM (which initially caused this sh1theap due to autoupdate error, same as my A700 got bricked )
hope i could help you out!
cheers
-Buster
Click to expand...
Click to collapse
thanks
i was stuck on cwm
could not acess to sd card
followed those steps and there it goes
working again
thanks a lot!
submancm

[Q] Stuck in a boot loop after using ASUS unlock tool

Hi guys,
I had a stock tf700, running ICS (4.1.1) and I followed the really good guide by sdbags on how to unlock/root.
I rooted it with no problems, and used the ASUS unlock tool which seemed to work (it says that my device in unlocked), but now I am stuck in a boot loop
It fully boots up and can stay working for about 30 seconds to a minute and then it just reboots.
I can get access to the bootloader but I have no idea what I'm doing. I haven't installed TWRP yet either.
I'm sceptical of just hitting "wipe data" as I hear I could brick it for good.
Any help would be greatly appreciated....I'm really at a loss!!

I've seen this behavior when the kernel was newer than the bootloader and incompatible - but if you haven't installed anything yet this is unlikely to be the reason for your problems. You can try to enable USB debugging, run "adb pull /proc/last_kmsg" and see if that file contains any interesting information about the reboot.
If you want to wipe data, you can choose RCK from the bootloader menu - if it loads the stock recovery (Android mascot with red triangle), you know that the recovery is good and you should be safe to run "wipe data". I have only seen the stock recovery once and that was almost 2 years ago, but if you press the Power button in the recovery, you may even get a menu from which you can wipe directly from the recovery (use power and volume keys to navigate).

Discard this post
HTC maxx

_that said:
I've seen this behavior when the kernel was newer than the bootloader and incompatible - but if you haven't installed anything yet this is unlikely to be the reason for your problems. You can try to enable USB debugging, run "adb pull /proc/last_kmsg" and see if that file contains any interesting information about the reboot.
If you want to wipe data, you can choose RCK from the bootloader menu - if it loads the stock recovery (Android mascot with red triangle), you know that the recovery is good and you should be safe to run "wipe data". I have only seen the stock recovery once and that was almost 2 years ago, but if you press the Power button in the recovery, you may even get a menu from which you can wipe directly from the recovery (use power and volume keys to navigate).
Click to expand...
Click to collapse
Thanks for the advice. I chose RCK from the bootloader menu but it just boots normally....no Android mascot. Am I doing something wrong there?excuse my complete newbness)
Is there a big risk in running "wipe data"? If I haven't installed any custom ROMs or flashed anything yet, is the risk of a brick slightly reduced?

bnscow said:
Thanks for the advice. I chose RCK from the bootloader menu but it just boots normally....no Android mascot. Am I doing something wrong there?excuse my complete newbness)
Click to expand...
Click to collapse
There's not much one can do wrong here - turn on tablet and hold volume-down until the bootloader menu appears, then hit volume-up to confirm "RCK", that should boot the recovery. If it starts the regular OS instead, something is wrong.
bnscow said:
Is there a big risk in running "wipe data"? If I haven't installed any custom ROMs or flashed anything yet, is the risk of a brick slightly reduced?
Click to expand...
Click to collapse
I wouldn't risk it if you can't even get to recovery manually ("wipe data" uses the recovery to wipe - if the recovery doesn't work, it's a hard brick).
Try installing TWRP via fastboot.

_that said:
There's not much one can do wrong here - turn on tablet and hold volume-down until the bootloader menu appears, then hit volume-up to confirm "RCK", that should boot the recovery. If it starts the regular OS instead, something is wrong.
Click to expand...
Click to collapse
Thanks for the advice. I took a couple of days break but I'm back trying to fix it.
I tried RCK and it just boots to a dead android man with the triangle error.
_that said:
Try installing TWRP via fastboot.
Click to expand...
Click to collapse
Also, I tried flashing TWRP via fastboot but after entering the flash recovery command, I keep getting an error message after entering saying "Too many links". Do you have any idea why that may be? I'm flashing TWRP 2.6.3.2
Thanks in advance!

Asus TF700T Tablet fix
Try this, it worked for me....and the standard disclaimer: I am not responsible if you misunderstand instructions I give here, if my instructions are wrong, if you forget to charge the battery and the tablet dies halfway through a flash or if your house goes up in flames. YOU DO THIS AT YOUR OWN RISK
Ok, so I think that I may have lost power during an upgrade (can’t think of any other reason for it!!) and ended up soft bricking my Asus TF700T tablet and recovery attempts would just lead to the dead Android with a red triangle with an exclamation point in the middle. My warranty having expired with Asus and any attempt for their assistance proved fruitless.
Well I researched and tried absolutely everything out there – (Hard Reset, installing TWRP, used a tool called Motochopper and flashing a custom ROM, downloaded and renaming .zip files, putting it onto a Micro SDcard is formatted Fat32, Scotts Tf700t Recovery etc.etc. etc.)
I even took it to the local shops and paid to have one of the Mobile Technician pop-up stores take a look at it, then a friendly techno geek………all with the same suggestions most likely a motherboard/hard drive problem.
My Asus TF700T tablet eventually ended up with just the plain white ASUS logo in the middle of the screen, some small print in the top left corner followed by the dreaded words “Unrecoverable Bootloader Error (0x00000000)”.
During all of my research I was led to believe that if you can still get to the recovery screen, where you see the 4 icons, all is not lost so I persisted.
Here is the instructions that I followed that restored my TF700T:
Download and install ADB, Fastboot and the required drivers - Download and run this cool little tool which has it all packed into one: [TOOL] [WINDOWS] ADB, Fastboot and Drivers - 15 seconds ADB Installer v1.1 - xda-developers (don't forget to hit the Thanks button)
NOTE: at the moment Fastboot seems to have issues with Windows 8
This awesome tool installs the ADB and Fastboot.exe to a folder on your C:\ drive (look for a file titled “adb”) as well as the corresponding drivers. This takes about 15 seconds to install following the prompts.
I installed the device drivers - if you have already tried to connect the tablet to your PC and it's recognised as a portable device you should be ok. If not, download the Asus Sync Utility from their support/downloads site and install it.
Download the latest firmware from Asus (Always make sure that you download the correct SKU version -WW, US etc.) and extract the zip twice so you access the blob file (a blob is a collection of binary data stored as a single entity) – copy and paste this blob file into the previously mentioned “adb” folder on your C:\ drive.
Reset the device with a paperclip/needle (about 2 cm down of the SDcard slot)
Power down the tablet and disconnect it from the keyboard dock.
Connect it to your computer via the original USB cable.
Push and hold the Volume Down key (left side of the rocker) and the Power key until you feel the tablet vibrate twice. Let go when you see the tiny script. Read it and it tells you that your tablet is now in Fastboot mode and you will see three or 4 icons (depending on the bootloader version). Select the USB icon to get into the Fastboot mode.
Your PC should acknowledge that a USB device has been connected (an audible indication) Don’t panic if the device does not appear under “My Computer” (as mine did not either – Fastboot will still communicate with it), you can go into Control Panel/Hardware and Sound/ Device Manager and you may see “Fastboot” icon, expand this and the device will be represented again by the “Fastboot” icon. Right click, select “Properties”, Driver tab and then select “Update Driver” and allow it to search automatically and update from the internet. This should then update and change to Asus icons. You now can be certain that you have the current device drivers.
In Windows Explorer navigate to the folder that contains your adb.exe and fastboot.exe
Win 7 press Shift + right click and select "Open command window here".
In the resulting command prompt screen type the following codes (those in bold):
C:\adb\ (or whatever the path to your fastboot folder is..)
fastboot devices (If that command returns a string of numbers and letters, you are good as gold. If it returns: "No devices found", fastboot is not working - yet - and you have to troubleshoot)
Followed by each in turn of the below, selecting Yes as required and allowing each to complete the process:
fastboot erase system
fastboot erase recovery
fastboot erase userdata
fastboot erase boot
fastboot erase misc
fastboot erase cache
The resulting screen should look something like this below – NOTE, I did make a couple of typos while I was attempting this which returned some multiple choice garble if this happens recheck you input instructions:
E:\asus>fastboot erase system
******** Did you mean to fastboot format this partition?
erasing 'system'...
OKAY [ 1.979s]
finished. total time: 1.980s
E:\asus>fastboot erase recovery
erasing 'recovery'...
OKAY [ 1.023s]
finished. total time: 1.025s
E:\asus>fastboot erase userdata
******** Did you mean to fastboot format this partition?
erasing 'userdata'...
OKAY [ 39.623s]
finished. total time: 39.624s
E:\asus>fastboot erase boot
erasing 'boot'...
OKAY [ 0.303s]
finished. total time: 0.304s
E:\asus>fastboot erase misc
erasing 'misc'...
OKAY [ 0.602s]
finished. total time: 0.603s
E:\asus>fastboot erase cache
******** Did you mean to fastboot format this partition?
erasing 'cache'...
OKAY [ 1.459s]
finished. total time: 1.460s
fastboot -i 0x0B05 flash system c:\adb\TF700T\blob - depending where you stored your blob, also this was the first time that I saw the loading bar appear on my tablet.
It will now go through the process of reinstalling your Android stock ROM and you should see the something similar to the following:
E:\asus>fastboot -i 0x0B05 flash system e:\asus\blob
erasing 'system'...
OKAY [ 1.731s]
sending 'system' (800935 KB)...
OKAY [134.276s]
writing 'system'...
OKAY [131.640s]
finished. total time: 267.649s
fastboot -i 0x0B05 reboot
E:\asus>fastboot -i 0x0B05 reboot
rebooting...
finished. total time: 0.020s
E:\asus>
I disconnected and rebooted My Asus TF700T and I now have a fully functioning Tablet with a stock ROM.
It has been reported that after completing this you may have some issues getting back get into recovery, hitting RCK and getting the dreaded dead Android (with a red triangle with an exclamation point in the middle). I have not attempted this but have been led to believe that flashing TWRP 2.7.0.1 via Fastboot works.
All acknowledgement and appreciation for this method should go to Buster99, a Senior Member of XDA Developers
http://forum.xda-developers.com/showthread.php?t=2179759&page=2
And to Snoop05, also a Senior Member of XDA Developers for the awesome ADB/Fastboot/Driver tool.
http://forum.xda- developers.com/showthread.php?t=2588979
To whom I am most grateful for the return of my tablet to a working state, I hope this works for you. Good Luck.

[SOLVED] TF700T Unrecoverable Bootloader Error 0x000000 no fastboot

So I saw that timduru posted the files for Nougatella 7.1 and couldn't wait to join the club. It has been a while since my TF700T has been upgraded. I had TWRP 2.8.4.0 so I wanted to upgrade to the latest version. Mistake #1!!!! I went to TWRP and got the img file put in on my sd card and installed in through the TWRP recovery. Now I get the RED unrecoverable bootloader error 0x000000. I can't get into the recovery but the tablet boots up into KatKiss without issue. I tried the TWRP app as well with no luck. I also can't get fastboot with adb fast boot working.
Windows 10 32bit
Asus Sync installed
Minimal ADB and Fastboot installed
USB debugging checked in settings
Any help would be appreciated.
Thank you.
My apologies I just saw that this is in the TF700 General Thread not the Help and Questions section. Moderator is this something I can move or do you need to do this? I did a quick search and nothing came up, but also having IE issues loading this site right now. Again thank you all!

It took a good 8 hours but I was finally able to get my tablet up and running. I took the advice of several posts and used their concepts to find the solution.
No ADB/Fastboot issue. I uninstalled all instances of ADB and all the drivers that referenced the device. I also removed Asus Sync.
Post by Accord281 [solved] Need Help: Can't get ADB to recognize device, there was a reference that people had good luck with the Google Driver. I installed Android Studio with SDK manager. I went in and then installed the Google Driver as well as the SDK manager for the stock ROM version (JB).
This still didn't work, so I reread the post and several other as well. I noticed that the recommendation was to set the USB connection to Picture not File. So I did this and ADB was working. Problem #1 checked off.
TWRP error was next. In the post by kansasboy001 Help Unrecoverable bootloader error. He posted a solution form "Buster" which worked spot on. See below.
This is the ONLY solution for this problem, worked great for me.
My solution
I have the same on my TF300t and A700 - but it seems i just managed to get my TF300t back
i tried all fastboot (reflashing recovery, boot, system etc) no dice - especially since writing system was done after 3 secs all the time.
Here how i restored my TF300T JB
download your appropriate lates firmware from Asus (WW, US etc.) and extract the zip twice so you have your blob file
install your device drivers if needed (i used Google SDK ones) (and as a Tip Win8 sucks for Fastboot stuff so try to get Win7 Vista XP for this)
Reset your device with a paperclip/needle (about 2 cm down of your sdcard slot) and hold vol-down to enter fastboot
(the folowing i did at least 10 times already but didn't erase misc)
fastboot erase system
fastboot erase recovery
fastboot erase userdata
fastboot erase boot
fastboot erase misc
fastboot erase cache
fastboot -i 0x0B05 flash system c:\adb\TF300t\blob (this is my path - your's may vary depending where you stored your blob) ((also this was the first time i saw the loading bar while flashing)*
fastboot -i 0x0B05 reboot
* it also took a lot longer as it should:
C:\>fastboot -i 0x0B05 flash system c:\adb\TF300t\blob
erasing 'system'...
OKAY [ 1.695s]
sending 'system' (800935 KB)...
OKAY [133.121s]
writing 'system'...
OKAY [153.973s]
finished. total time: 288.789s
im now setting my tab up to get back to CM (which initially caused this sh1theap due to autoupdate error, same as my A700 got bricked )
hope i could help you out!
cheers
-Buster
Finally I was able to flash TWRP 3.0.0 in ADB. I also followed the post from lj50036 [twrp 2.6.3.2] [read me]. This seems to still be an issue with TWRP and the TF700T. I followed the code and it took less than 10 mins to format data.
Thank you to timduru as well as I am enjoying your build as we speak.
Click to expand...
Click to collapse
Click to expand...
Click to collapse