Im not new with using adb but using it in a virtualbox and getting all the drivers to work is becoming a pain. I can get the adb drivers to install and recognize the device, but I am having problems getting the diag drivers to work.
The phone is an HTC Incredible. I tried using the universal adb drivers which installed correctly for the most part, my problem is when the device reboots and I try to get it to be recognized from the fastboot devices command, it gets disconnected from the usb devices and then I get an error that the device is busy, and then I cant reconnect the phone through any way other than deleting the xp virtual machine and re-installing it and starting from scratch.
Any information or links explaining steps to mount the phone and install the adb and diag drivers would be greatly appreciated, thanks in advance, apologize for first newb post, will try to contribute something once I stop pulling my hair out.
Figured it out, put it in diag mode before connecting it and then set the filter and install drivers, disable port before rebooting.
Related
I have a T-Mobile Nexus S that has a bootloop. Its my friends so I dont know what he did to it. I can get to the bootloader but when I connect it to my computer it won't recognize it. I thought of a driver problem but i can't get past the bootloop to enable usb debugging. It also won't show up in device manager. The phone's usb port works. It will still charge. I just need to get rid of the bootloop. Any help would be greatly appreciated. Thanks!
MAGnum_21 said:
I have a T-Mobile Nexus S that has a bootloop. Its my friends so I dont know what he did to it. I can get to the bootloader but when I connect it to my computer it won't recognize it. I thought of a driver problem but i can't get past the bootloop to enable usb debugging. It also won't show up in device manager. The phone's usb port works. It will still charge. I just need to get rid of the bootloop. Any help would be greatly appreciated. Thanks!
Click to expand...
Click to collapse
If it has a custom recovery, boot into it and wipe data/factory reset.
If it does not, flash a custom recovery. These forums are chockful on guides how to root, flash stuff and fix bootloops.
I looked up how to install recoveries but when i plug in my nexus to my computer it is not recognized. At the bottom of the bootloader screen it says "USB Control Init" and then "USB Control Init End". I do have the proper drivers installed. Is there a fix for this?
Are you sure that you have the correct drivers installed, though?
It's known that people who use Windows have a lot of success with the PDAnet drivers (you can search around here for those), rather then with the standard USB drivers the Google SDK provides.
Greetz
Did you try to run "fastboot devices" in command prompt while it's at fastboot mode and plugged into the PC? What do you see as the result? The guides on XDA should help, but you may also head over to nexusshacks_dot_com for more references.
Sent from my Nexus S using XDA App
With pdanet it requires me to plug in my phone with usb debugging turned on to get the drivers with i cant do because of the bootloop. and when i go into command prompt it says "waiting for device" and won't recognize it. Thanks for the help
Hi,
I followed http://forum.xda-developers.com/showthread.php?t=1695175 link to upgrade my phone from Gingerbread to RemICS. Now I wanted to switch back to Gingerbread so I downloaded latest official update. I started odin and connected my device in download mode but when I connected deice to my windows machine "USB device not recognized" error come up. I reinstalled Samsung kies and all drivers but still this error persists. I tried connecting to all usb ports and even tried connecting to other machine but no result.
I am not sure what is going wrong so please help me guys in switching back to GB.
Also this is my first post so I am sorry if I said something wrong or asked question in wrong manner.
Thanks.
sandeepthakurala said:
Hi,
I followed http://forum.xda-developers.com/showthread.php?t=1695175 link to upgrade my phone from Gingerbread to RemICS. Now I wanted to switch back to Gingerbread so I downloaded latest official update. I started odin and connected my device in download mode but when I connected deice to my windows machine "USB device not recognized" error come up. I reinstalled Samsung kies and all drivers but still this error persists. I tried connecting to all usb ports and even tried connecting to other machine but no result.
I am not sure what is going wrong so please help me guys in switching back to GB.
Also this is my first post so I am sorry if I said something wrong or asked question in wrong manner.
Thanks.
Click to expand...
Click to collapse
well, why don't you like ICS I'm just curious about that !
about that problem ...uninstall Kies then restart machine and try to perform a clean install of drivers yes again by Kies but don't connect device at this time and restart PC after installation then connect phone to PC activate usb debugging
also if you like to play with custom ROMs (= flashing ) then I suggest to install Android SDK to get adb.exe/fastboot.exe
now activate usb debugging on your phone connect it to PC then enter from cmd.exe -open console in adb.exe folder location usually ~ \android-sdk\platform-tools\
adb devices
if you get answer it means you have drivers installed
also start Device Manager start/run/devmgmt.msc and connect phone to PC (activate usb debugging previously ) you should see adb interface listed -take a look at picture
now try to start phone in fastboot/download mode and connect to PC it should detect phone
open cmd.exe in fastboot.exe folder ~\android-sdk\platform-tools\ then try this
fastboot devices
Please use the Q&A Forum for questions &
Read the Forum Rules Ref Posting
Thanks ✟
Moving to Q&A
I need help here... I'm trying to root this thing and I don't know if I have a software problem, USB issue or phone problem.
Running Vista Hpme Edition 32 bit.
I downloaded the Samsung Drivers 1.4.6 or something and the comp said they were already installed. Now when I plug my phone in, it tries to install drivers again and hangs up on CDC Serial and MTP. It asks for a CD with driver info.
I tried deleting the USB drivers and restarting the comp to reinitialize them. I did a factory reset on the phone. Then I plugged back in and I am still at a stand still.
Since it said the drivers were already installed, I tried debugfs to root it. It just stays stuck at "Waiting for device to be detected".
How do I get these drivers to load properly so that debugfs can detect my phone?
In windows explorer, I can see the I535 and my internal and external cards... Grrrrrrrr
bionik9 said:
I need help here... I'm trying to root this thing and I don't know if I have a software problem, USB issue or phone problem.
Running Vista Hpme Edition 32 bit.
I downloaded the Samsung Drivers 1.4.6 or something and the comp said they were already installed. Now when I plug my phone in, it tries to install drivers again and hangs up on CDC Serial and MTP. It asks for a CD with driver info.
I tried deleting the USB drivers and restarting the comp to reinitialize them. I did a factory reset on the phone. Then I plugged back in and I am still at a stand still.
Since it said the drivers were already installed, I tried debugfs to root it. It just stays stuck at "Waiting for device to be detected".
How do I get these drivers to load properly so that debugfs can detect my phone?
In windows explorer, I can see the I535 and my internal and external cards... Grrrrrrrr
Click to expand...
Click to collapse
At that prompt it should also ask you to install them either way, choose yes... install the drivers then try opening up Odin and see if it can see your phone....
Your phone will have to be in download mode, and Odin should show some sort of recognition as in a COM port address in the upper left....
If that fails, follow the guide in my sig, droidstyle put together a great step by step instruction....(You can also follow the sticky about how to return your phone to Verizon in this forum that I put together, except to choose root66 and don't re-lock the bootloader)
Nevermind... I installed Kies and that seemed to remedy the issue. Thank you, though.
USB Drivers are let your PC communicate with your device.
If you are executing some ADB Commands, you will need USB Drivers installed which will let the ADB server on your PC communicate with the ADB client on your device. If there are no USB Drivers installed on your PC, you will not be able to perform activities on your device via the PC.
First of All I would recommend you to install Universal ADB Driver Installer.The Universal ADB Driver installer detects your phone and installs the ADB drivers for it.This tool developed by drsmart is your solution to the “device not found” error you might get on executing ADB commands.
Universal ADB Driver Installer Download Link - http://adbdriver.com/downloads/
USB DRIVERS
1.SAMSUNG:
--- http://www.samsung.com/us/support/downloads
2.LG
---http://www.lg.com/us/support/mobile-support
3.HTC
---https://support.htc.com/en
4.SONY
---http://developer.sonymobile.com/downloads/drivers/
5.ASUS
---http://support.asus.com/download/options.aspx?SLanguage=en&type=1
6.MOTOROLA
---http://www.motorola.com/sites/motodev/us-en/motodev_lp.html
MORE DEVICES WILL BE UPDATED
Thanks for the info. I tried the univ adb driver installer but it showed I already had the right driver installed. Windows explorer can see my phone but other apps like HTC Sync or myphoneexplorer can't. This only happened after I rooted & installed a new rom. Maybe the rom is faulty...
I want Google nexus driver
any one can help me ?
mt6572 driver
Please add driver for mt6572 device
thx. very usefull!
thanks for the updated links.
Gole Maryam said:
I want Google nexus driver
any one can help me ?
Click to expand...
Click to collapse
an universal driver for all Nexus Devices (Phones and Tablets) can be found here:
http://forum.xda-developers.com/showthread.php?t=2513339
No access to USB debug
I give up and need some professional help...Ya both kinds.
Here we go, I have the Galaxy 3 d2att I747
Rooted
I was running CM 10.2 with latest nightly, I think 20131208 and decided to update to CM11 via my Cyanogenmod updater but before I did I had read somewhere I should change from CWM recovery to TWRP so I downloaded Goomanager and updated to the TWRP version for my phone then went for the KitKat update and thats when the trouble began.
I am now stuck in a boot loop even if I try to boot into TWRP all I get is the TWRP boot logo then straight into boot loop again. I am almost positive I did a factory wipe as well as cache/dalvik.
Not being able to use TWRP to get into recovery I thought I would just use Odin but I can't get any of my laptops to recognize the phones USB, I just get the windows usb driver error and have tried to install the drivers manually via device manager using my samsung 7 chronos with windows 8.1 and my acer with windows 7. I updated drivers using Samsung Kies and from the website, no luck.
I also ventured into an area that I have no expertise in but I guess thats how we learn so I downloaded the Android SDK thinking I could use it to download and install the google USB drivers that way, but I can't get out of boot loop to make sure USB debugging is checked. The only thing I can access is the stock download mode which would be great if I could use the USB connection.
What am I missing? Any suggestions?
USB Not Recognized Error
I noticed that my phone suddenly stopped being recognized on both my Windows 7 and Win8 laptops. I have been trying to fix it with the drivers but to no avail. However, I plugged my phone in with a different USB cord and voila it was recognized and working. Maybe this could possibly be a simple fix.
My computer stopped recognizing my Skyrocket
Hi Everyone,
I also am having trouble with my win 7 computer recognizing my Skyrocket suddenly. I have been using several KitKat roms and they have been working just fine, except for some reported bugs that the CM devs are working on. I even was able to connect to the computer and explore both my internal and external drives. Then suddenly that stopped and the computer gave me a need to get drivers warning. I've tried to download drivers from Samsung and the computer says they are already installed. I also tried the universal driver download and got the same message. Any help would be appreciated. Like the others on this forum, I wouldn't be able to odin if I got in trouble.
Thanks for your concideration,
drewfs7270
I switched to a different rom and now it's working again !
Sent from my SAMSUNG-SGH-I727 using Tapatalk
Thanks.. :good: usefull
Also, any mobile manufacturer website has guides or direct downloads for drivers. Otherwise uni drivers suffice.....
Sent from my Nexus 5 using xda app-developers app
mtk preloader driver unable to install/unplugged appears
mt65xx unplugged when I try installing my device, I tried uninstalling all preloader vcom drivers in my laptop then restart and when I try to connect my device mtk mt65xx preloader just pops up in device manager then suddenly disappears and unknown device shows instead. I also tried manually update driver for unknown device then select the folder where my mtk driver is saved still unsuccessful? I've also searched and tried many other ways out there still no luck. Can anybody give me a solution? By the way i'm using windows 7 x64.
Delted
Edit: Deleted
soft brick
I face bad experienced, the tablet can not boot ( after install TWRP ) but enable to enter the fastboot mode and can be detected by the computer as android adb interface but adb can't communicated with the tablet. (list of devices atached)
I do have a backup file ( I make it before soft brick, I make backup using dd command, because I don't have cwm/twrp recovery ).... but how to flash it ? Tablet chipset is wonder media 8980 OS android 4.2.2
I can not flash it by adb/fastboot.
Maybe someone here can give me a little guide for how to....
I really appreciate for your kindness
Hey, I made an expirience, which might help other users as well.
I have a Sony device (Z1C) and use Windows 10, maybe this will help for other brands and for other Windows 10 users.
I installed drivers for my device and was able to use adb. When I put the phone into fastboot mode, it was not recognized anymore. I found out, Sony has a seperate (updated, maybe?) driver for fastboot mode. When I tried to install this, the driver was not signed and Windows refused to install it. However, you can enter the UEFI (successor of BIOS) and enable installation of unsigned drivers (at own risk). Then I was able to install the fastboot driver and controll my phone in fastboot mode as well as in adb mode.
In conclusion: You might think you installed drivers, because you did, but maybe you did not.
Even on LineageOS page, many people fail to mention that, you DON'T and SHOULDN'T install any generic or universal ADB driver if you have Samsung device. As you can just install Samsung USB Drivers officially from Samsung site. Samsung USB Drivers already contain ABD interface driver just fine so Universal ADB driver is redundant for Samsung phones.
I recently bought a YU YUPHORIA . When i tried to root it I was stuck at waiting for device. I checked on different forums and somehow everybody was telling about how the ADB drivers are not installed. I tried different methods . I tried to update the Android Composite ADB Interface as they had worked for a lot of other people but they didn't work with my phone. Then i tried to install ADB drivers with the help of Pdanet but the Pdanet was stuck at Trying to install Pdanet on your phone. When i write fastboot commands like fastboot -i 0x2A96 devices my device is recognised. But when i write adb devices my device doesn't show up. Please help because I really need to use this phone for app development purposes but Android Studio is also not recognising my device. I have managed to root my device but can't solve this problem of ADB not detecting my device.
Usb debugging is enabled and i Have tried uninstalling all android drivers . But then the android ADB interface is shown in other drivers with yellow mark and when i try to update it same thing happens "Window unable to install drivers"
Is their any hardware problem with my Device.?
suparv2204 said:
I recently bought a YU YUPHORIA . When i tried to root it I was stuck at waiting for device. I checked on different forums and somehow everybody was telling about how the ADB drivers are not installed. I tried different methods . I tried to update the Android Composite ADB Interface as they had worked for a lot of other people but they didn't work with my phone. Then i tried to install ADB drivers with the help of Pdanet but the Pdanet was stuck at Trying to install Pdanet on your phone. When i write fastboot commands like fastboot -i 0x2A96 devices my device is recognised. But when i write adb devices my device doesn't show up. Please help because I really need to use this phone for app development purposes but Android Studio is also not recognising my device. I have managed to root my device but can't solve this problem of ADB not detecting my device. Is their any hardware problem with my Device.
Click to expand...
Click to collapse
First, be sure you have enabled USB debugging in developer options. Also, you may have to uninstall all android drivers from your PC and then reinstall the specific drivers for your device.
Evolution_Tech said:
First, be sure you have enabled USB debugging in developer options. Also, you may have to uninstall all android drivers from your PC and then reinstall the specific drivers for your device.
Click to expand...
Click to collapse
Usb debugging is enabled and i Have tried uninstalling all android drivers . But then the android ADB interface is shown in other drivers with yellow mark and when i try to update it same thing happens "Window unable to install drivers"
suparv2204 said:
Usb debugging is enabled and i Have tried uninstalling all android drivers . But then the android ADB interface is shown in other drivers with yellow mark and when i try to update it same thing happens "Window unable to install drivers"
Click to expand...
Click to collapse
OK, try to update manually. Select update driver, then choose let me pick, then navigate to where you have the new driver.
Evolution_Tech said:
OK, try to update manually. Select update driver, then choose let me pick, then navigate to where you have the new driver.
Click to expand...
Click to collapse
I mentioned in the post I tried that . But windows shows the same message. I have tried with Google Usb drivers . I have also tried with other mobile drivers of Asus , Htc but same thing happens