Just like the G2 (vision) we can now get radio s-off and superCID on our devices . there is also the chance of a sim unlock this way (i cant verify this working on the ace as mine is unlocked)
LOOK AT THE CID
#
INFOversion: 0.5
#
INFOversion-bootloader: 0.85.2007
#
INFOversion-baseband: 26.03.02.26_M
#
INFOversion-cpld: None
#
INFOversion-microp: 0438
#
INFOversion-main: 1.32.405.6
#
INFOserialno: HT0AXXXXXXXX
#
INFOimei: XXXXXXXXXXXX
#
INFOproduct: ace
#
INFOplatform: HBOOT-7230
#
INFOmodelid: PD9810000
#
INFOcidnum: 11111111
#
INFObattery-status: good
#
INFObattery-voltage: 3803mV
#
INFOpartition-layout: Generic
#
INFOsecurity: off
#
INFObuild-mode: ENG
#
INFOboot-mode: FASTBOOT
#
INFOcommitno-bootloader: 7eafc656
#
INFOhbootpreupdate: 11
#
INFOgencheckpt: 0
Click to expand...
Click to collapse
Although the steps are almost identical to the Visions method I would not recommend it yet. there are some simpler / safer tools on there way
[What Is Radio S-OFF ?]
Basically what we have at the moment is an ENG hboot that is ignoring the securflag value .... which means if you update an official RUU or just to a shipping hboot you will lose S-OFF. But with this you will always be s-off and therefore no matter what you wont have write protected eMMC even on a shipping hboot
[What Is SuperCID ?]
The CID (Carrier ID) is a string that the hboot looks at to see what RUU's you can flash i.e HTC__001 can flash WWE roms and VODA only Vodafone roms. With SuperCID (11111111) we can flash any rom from anyone
[Credits]
All the devs in #g2root that contributed I helped in no way to this hack it was all other devs im just relaying the info to the DesireHD users many many thanks .... although i was the first person to do the radio S-OFF on the DesireHD (ace)
[One More Warning]
Just to repeat i advise against trying to radio s-off with the g2 guide at this time as the method is messy and has a real chance of really messing things up .... if u try this now u are on your own ..... really
MODs ill replace this with a full guide when the method is safer
thanks apache the procedure is simliar to the "original" permroot/S-off process I see the only difference is probably the kernel, where I assume you used your own kernel mod/modified the vision CM kernel alongside a modified WPTHIS to match your kernel adaptation to make it work?!
As far as I understood it, this method patches radio to achieve S-OFF, SuperCID and unlock.
So, flashing a RUU or applying an OTA would revert this procedure?
Hi,
nevertheless could be the SuperCID independent from kernel,
as in older devices (HTC Hermes).
with friendly greet
starbase64
Closed for now so Dev can work his magic and we don't get 1000+ posts saying "thank you..this will be epic"
Apache...contact me when you are ready for me to re-open
Cheers,
M_T_M
Your friendly Mod
Hi there.
I'm really sorry for my poor english, I'll try to do my best.
I have the HTC one S, I tried the CM10 a few time ago on my phone. It was nice, but not really stable. I asked to my brother to reinstall the official ROM. But during the reinstall, I don't know why, his computer restarted itself and thus the installation was interrupted in the middle of the installation.
At his moment, my phone doesn't work and I can't install any ROM. The computer doesn't recognise my phone (as phone, hard drive, device, or anything else).
I tried with a usb key plugged on the phone (with the update.zip in it) and hit "Apply update from external memory", but the phone display an error message (Invalid option) and reboots (message: "Succes rebooting by reason : oem-0..")
Can anyone, please, tell me what to do (step by step, links, official rom to download,...) ? I'm really lost.
You can find here some picture to figure out what the problem is.
HTC One S
P/N: 99HRE012-00
CPU: Z520e
I already thank you.
As long as you can access the bootloader I think you should be OK.
I'd try to run a RUU from Windows while the phone is connected and displaying Fastboot USB at the bootloader.
If you can't find the RUU for your phone, please launch this command:
Code:
fastboot getvar all
And copy the output but remove IMEI and any unique personnal IDs.
Hi. Thanks for your reply.
I get nothing when I type "fastboot getvar all", except this message: "<waiting for device>".
I have this with lsusb: "Bus 002 Device 008: ID 0bb4:0ff9 HTC (High Tech Computer Corp.) Desire / Desire HD / Hero / Thunderbolt".
For KDD:
Salut KDD. J'ai essayé la commande que tu m'as donné, mais pas de résultat, à par le message <waiting for device>.
Sinon j'ai encore ceci quand je tape lsusb : Bus 002 Device 008: ID 0bb4:0ff9 HTC (High Tech Computer Corp.) Desire / Desire HD / Hero / Thunderbolt.
I tried with windows and I got this:
INFOversion: 0.5
INFOversion-bootloader: 2.15.0000
INFOversion-baseband: 1.15.50.05.29
INFOversion-cpld: None
INFOversion-microp: None
INFOversion-main:
INFOversion-misc: PVT SHIP S-ON
INFOserialno: SH24SW4*****
INFOimei: 35990**********
INFOproduct: vle
INFOplatform: HBOOT-8960
INFOmodelid: PJ4010000
INFOcidnum: HTC__E11
INFObattery-status: low
INFObattery-voltage: 3552mV
INFOpartition-layout: Generic
INFOsecurity: on
INFObuild-mode: SHIP
INFOboot-mode: FASTBOOT
INFOcommitno-bootloader: dirty-64bedd38
INFOhbootpreupdate: 11
INFOgencheckpt: 0
all: Done!
Is it useful?
INFOcidnum: HTC__E11
Click to expand...
Click to collapse
You CID is HTC__E11
It's for HTC-Dutch
I don't know the exact RUU to run for your CID, but I'd say try the latest european RUU from there: http://androidruu.com/?developer=Ville
It would be RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8
Try to run this from Windows, your phone should be restored as new.
kdd998 said:
You CID is HTC__E11
It's for HTC-Dutch
I don't know the exact RUU to run for your CID, but I'd say try the latest european RUU from there: http://androidruu.com/?developer=Ville
It would be RUU_Ville_U_JB_45_S_HTC_Europe_3.16.401.8
Try to run this from Windows, your phone should be restored as new.
Click to expand...
Click to collapse
THX!!!
It worked!
I thought having tried all RUU's, but apparently I forgot this one.
when i boot into bootloader this is info im given.
HBOOT- 3.19.0
Radio- 1.12.20.1211
opendsp - v47.2.2 etcetc
os- 4.17.605.5
camf3xu said:
when i boot into bootloader this is info im given.
HBOOT- 3.19.0
Radio- 1.12.20.1211
opendsp - v47.2.2 etcetc
os- 4.17.605.5
Click to expand...
Click to collapse
you are up to date.
searching would have saved you some time.
http://forum.xda-developers.com/showthread.php?t=2723159
screen says:
*** TEMPERED ***
*** RELOCKED ***
M4_UL PUT SHIP S-ON RL
HBOOT-2.22.0000
RADIO-1.28.40e.00.24
OpenDSP-v19.2.0268.0927
OS-4.14.401.2
eMMC-boot 1024MB
Aug 12 2015, 18:31:50:0
I've looked at other threads here and will continue to do so, but not been able to solve my issue. I've tried downloading RUUs but none of them are the correct version I don't think. I haven't found one that is 4.14.401.2 yet.
process stop here
i tried 2 time but same result.
any solution?
device info:
dev[1] SH1BMVN04965
Mode: fastboot
Hardware: pico
Manufactory: HTC
MID: PJ0310000
Device Info
Security status: S-ON
Model Id: PJ0310000
Custom Id: VODAP034 (VODA-EU)
Serial number: SH1BMVN04965
Product: pico
IMEI: 357953049560823
Platform: HBOOT-7225A
Bootloader ver: 1.03.0000
Baseband ver: 1.11.82.17
Cpld verersion: None
Microp version: None
Main version: 1.29.161.3
Battery Status: good
Battery Volt: 4124mV
PartitionLayout: HTC
Commitno bl: 30d3dcb5
Hbootpreupdate: 12
i am waiting for reply from someone handsome..........
please solve my problem.