Database Info

Custom Recovery wont stick on xoom verizon

ive just unlocked the bootloader for my xoom 4g (stingray) and went to install a custom recovery and it flashes fight in fastboot then when i reboot into recovey it shows the green android logo laying down then shows the red ! . i have to hold the power and the up volume key to show stock recovery.
why is the custom recovery not sticking. is it because im not rooted?
im trying to root this devices and the all in one tool needs to reboot into custom recovery but keeps going into stock recovery..
what am i doing wrong?

Valkyrie743 said:
ive just unlocked the bootloader for my xoom 4g (stingray) and went to install a custom recovery and it flashes fight in fastboot then when i reboot into recovey it shows the green android logo laying down then shows the red ! . i have to hold the power and the up volume key to show stock recovery.
why is the custom recovery not sticking. is it because im not rooted?
im trying to root this devices and the all in one tool needs to reboot into custom recovery but keeps going into stock recovery..
what am i doing wrong?
Click to expand...
Click to collapse
fastboot twrp recovery img,v1.0 the eos 2.2.0 edition..
http://forum.xda-developers.com/showthread.php?t=1782235

tumpy said:
fastboot twrp recovery img,v1.0 the eos 2.2.0 edition..
http://forum.xda-developers.com/showthread.php?t=1782235
Click to expand...
Click to collapse
just downloaded http://d-h.st/7QC from that link. fastboot flash recovery. reboot then reboot into recovery i get this image AGAIN
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
if i hold the power button then press up on the volume it will then shows stock recovery this
ive been at this for a while? when i reboot the xoom is recovery being overwritten while booting? i have bootloader unlocked. i have a 8gb micro sd card installed???

Valkyrie743 said:
ive just unlocked the bootloader for my xoom 4g (stingray) and went to install a custom recovery and it flashes fight in fastboot then when i reboot into recovey it shows the green android logo laying down then shows the red ! . i have to hold the power and the up volume key to show stock recovery.
why is the custom recovery not sticking. is it because im not rooted?
im trying to root this devices and the all in one tool needs to reboot into custom recovery but keeps going into stock recovery..
what am i doing wrong?
Click to expand...
Click to collapse
You have to get into recovery right after you flash it (you can't let the OS boot) on stock or yes, the recovery will overwrite with stock. Universal roots in the Dev forum will generally disable this behavior as well as custom roms.

reboot then reboot into recovery i get this image AGAIN
Click to expand...
Click to collapse
this is the problem, never fully boot the tablet when you fastboot the img,
fastboot flash recovery recovery.img
fastboot reboot - hold down the -vol button to get back in recovery and it will stick...
this one always work for me (Recovery Image (solarnz-R4c-100611-1150)http://forum.xda-developers.com/showthread.php?t=1074979

Sent from my XOOM 2 ME using Tapatalk 2

tumpy said:
this is the problem, never fully boot the tablet when you fastboot the img,
fastboot flash recovery recovery.img
fastboot reboot - hold down the -vol button to get back in recovery and it will stick...
this one always work for me (Recovery Image (solarnz-R4c-100611-1150)http://forum.xda-developers.com/showthread.php?t=1074979
Click to expand...
Click to collapse
ah thanks. i went into recovery right after flashing and rebooting. thanks so much. idk why i didnt think of that. forgot that recoveries sometimes get over written on boot. long day lol

Valkyrie743 said:
ah thanks. i went into recovery right after flashing and rebooting. thanks so much. idk why i didnt think of that. forgot that recoveries sometimes get over written on boot. long day lol
Click to expand...
Click to collapse
Hello, I have the exact same problem (the green robot laying down when trying to enter into the Recovery mode).
I tried the fastboot reboot and pressing the down volume button, but then it goes into fastboot mode.
If I do it while pressing volume up, then it goes into "RSD" mode ...
I tried "adb reboot recovery", and also pressing the volume down once to select "recovery mode" when booting but same problem, it crashed right after displaying "entering recovery mode" ...
I tried 3 different recovery images, still the same ...
Any idea ?

dizzy33 said:
Hello, I have the exact same problem (the green robot laying down when trying to enter into the Recovery mode).
I tried the fastboot reboot and pressing the down volume button, but then it goes into fastboot mode.
If I do it while pressing volume up, then it goes into "RSD" mode ...
I tried "adb reboot recovery", and also pressing the volume down once to select "recovery mode" when booting but same problem, it crashed right after displaying "entering recovery mode" ...
I tried 3 different recovery images, still the same ...
Any idea ?
Click to expand...
Click to collapse
When you reboot from fastboot after flashing the recovery you need to tap the volume down, don't hold it (and don't tap too fast.) adb commands will NOT work, and if it gets to the honeycomb or ics boot logo's it's probably too late and it's overwritten the recovery again. It doesn't matter what recovery image you use, you just HAVE to catch recovery before it boots.

airesch said:
When you reboot from fastboot after flashing the recovery you need to tap the volume down, don't hold it (and don't tap too fast.) adb commands will NOT work, and if it gets to the honeycomb or ics boot logo's it's probably too late and it's overwritten the recovery again. It doesn't matter what recovery image you use, you just HAVE to catch recovery before it boots.
Click to expand...
Click to collapse
Thanks a lot ! That was my problem, I was holding the volume button instead of taping it ...

Bumping this up, I have a similar issue.
Unlocked bootloader and flashed recovery via fastboot, rebooted and hit the volume down button to enter recovery - all good. But when I get to the point where it should be booting into recovery it just sits on the screen saying "reading ODM fuse: 1" and doesn't boot beyond that point. I've tried using a couple of different recovery images but they all end in the same result.
Anyone able to serve up some insight on where I've gone wrong?
Cheers.
EDIT: Tried flashing Rogue Touch Recovery and it worked first time.

BJ van Beethoven said:
Bumping this up, I have a similar issue.
Unlocked bootloader and flashed recovery via fastboot, rebooted and hit the volume down button to enter recovery - all good. But when I get to the point where it should be booting into recovery it just sits on the screen saying "reading ODM fuse: 1" and doesn't boot beyond that point. I've tried using a couple of different recovery images but they all end in the same result.
Anyone able to serve up some insight on where I've gone wrong?
Cheers.
EDIT: Tried flashing Rogue Touch Recovery and it worked first time.
Click to expand...
Click to collapse
Did you flash the Rogue Touch Recovery using the zip file? If so, please tell me which one. I have currently flashed with a working CWM 4.0.0.4 recovery and JB 4.2 Rom (EOS 4 nightly 163)
Thank you in advance.

Stuck on Lg bootscreen - no recovery

Hello everyone, I tried to flash v30a baseband over my CM nightly, but now all I can see is the LG logo..
I've tried everything, including xbsall's resurrection guide, pandaball's guide, lg update tool etc.. but i can't find a way to fix it.
Can someone help me?

this might be stupid but why not try to reflash the WKparts and recovery? with like optimusRS simple tool
oh wait that maywork for you but if you are on stock ICS just boot in to the stock recovery and follow the steps in there thne should you be fine otherwise flash the above and make a factory reset"wipe" in twrp i had the same error and the stock recovery thing fixed it for me

sioxz said:
this might be stupid but why not try to reflash the WKparts and recovery? with like optimusRS simple tool
oh wait that maywork for you but if you are on stock ICS just boot in to the stock recovery and follow the steps in there thne should you be fine otherwise flash the above and make a factory reset"wipe" in twrp i had the same error and the stock recovery thing fixed it for me
Click to expand...
Click to collapse
Stock recovery doesn't work (that what i meant with "no recovery"), could you link me that tool? I'm not sure I've tried it.

But Your Phone In Download Mode And Flash ICS 30A or 30B /C etc....Kdz
If U Dont Know How to Flash Kdz Search On Google .

OptimusRs said:
But Your Phone In Download Mode And Flash ICS 30A or 30B /C etc....Kdz
If U Dont Know How to Flash Kdz Search On Google .
Click to expand...
Click to collapse
I'll try again using this guide http://forum.xda-developers.com/showthread.php?t=2191698 and see what happens.

jakill.P920 said:
I'll try again using this guide http://forum.xda-developers.com/showthread.php?t=2191698 and see what happens.
Click to expand...
Click to collapse
Ok, i've flashed v30a using that procedure. I'm still stuck on boot. I've followed your tutorial about wkpark's bootloader and recovery, but when I try to boot in recovery it just says "please wait for seconds.. power off.." and it shuts down again..
Then I've tried installing stock recovery in the same way, but that didn't work at all.. what can I do now?

jakill.P920 said:
Ok, i've flashed v30a using that procedure. I'm still stuck on boot. I've followed your tutorial about wkpark's bootloader and recovery, but when I try to boot in recovery it just says "please wait for seconds.. power off.." and it shuts down again..
Then I've tried installing stock recovery in the same way, but that didn't work at all.. what can I do now?
Click to expand...
Click to collapse
Use This Guide To Flash The Kdz
And After Complete Flashing.... Enter The Stock Recovery and Wipe to do that power Off The Phone and Press And Hold Volume (-) than Power it On

OptimusRs said:
Use This Guide To Flash The Kdz
And After Complete Flashing.... Enter The Stock Recovery and Wipe to do that power Off The Phone and Press And Hold Volume (-) than Power it On
Click to expand...
Click to collapse
I know it may sound as a newbie question.. well, it is a noob question afterall :laugh: I'm not sure if I'm booting properly in download mode, or if my phone doesn't boot in download anymore. (I've read that it doesn't have to show me the korean S/W sentence, but how can I be sure I'm in download mode?)

jakill.P920 said:
I know it may sound as a newbie question.. well, it is a noob question afterall :laugh: I'm not sure if I'm booting properly in download mode, or if my phone doesn't boot in download anymore. (I've read that it doesn't have to show me the korean S/W sentence, but how can I be sure I'm in download mode?)
Click to expand...
Click to collapse
To Enter The Dowmload Mode :
Power Off Your Phone And Hold Volume (+) Than Connect Your Phone To The PC Or Laptop Using USB Cable it Well Show You Download Mode Logo With Korean stuff etc...
In Some Devices On GB it Well Show Black Screen Only So Open The Device Manager You Well See :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
That Mean You Now In Download Mode

OptimusRs said:
To Enter The Dowmload Mode :
Power Off Your Phone And Hold Volume (+) Than Connect Your Phone To The PC Or Laptop Using USB Cable it Well Show You Download Mode Logo With Korean stuff etc...
In Some Devices On GB it Well Show Black Screen Only So Open The Device Manager You Well See :
That Mean You Now In Download Mode
Click to expand...
Click to collapse
Ok, I've done everything right, but nothing has changed.. perhaps I should try to flash a gingerbread kdz, but I wasn't able to find any of them :/

Had this issue yesterday. You will need wkpart bootloader to make it boot and flash recovery.
Follow the guide http://forum.xda-developers.com/showthread.php?p=43672348
After flashing this, recovery will work, so you can wipe data.

jakill.P920 said:
Ok, i've flashed v30a using that procedure. I'm still stuck on boot. I've followed your tutorial about wkpark's bootloader and recovery, but when I try to boot in recovery it just says "please wait for seconds.. power off.." and it shuts down again..
Then I've tried installing stock recovery in the same way, but that didn't work at all.. what can I do now?
Click to expand...
Click to collapse
DeXel55 said:
Had this issue yesterday. You will need wkpart bootloader to make it boot and flash recovery.
Follow the guide http://forum.xda-developers.com/showthread.php?p=43672348
After flashing this, recovery will work, so you can wipe data.
Click to expand...
Click to collapse
As I said before, I've already tried that one :/ when I boot in recovery using wkpark's bootloader, it just says "power of.." and then it shuts down. I've tried option three (twrp recovery) and 4(stock), I'll try to flash option one and see what happens (wkpark's bootloader+cwm recovery)

jakill.P920 said:
As I said before, I've already tried that one :/ when I boot in recovery using wkpark's bootloader, it just says "power of.." and then it shuts down. I've tried option three (twrp recovery) and 4(stock), I'll try to flash option one and see what happens (wkpark's bootloader+cwm recovery)
Click to expand...
Click to collapse
I still can't believe it, but normal cwm recovery actually worked. My phone is finally resurrected! Thank you guys for your support! Now I guess I'm going to install Optimus RS' rom, 'cause I think it's the best one around

[GT-S7500][Root]A new Method To root galaxy ace plus GT-S7500

Root GT-S7500 BY danyznd123​
Hey!!
I made today a new flashble zip to Root galaxy ace plus GT-S7500!!
To start,check the Disclaimer:
Your phone must be charged
GT-S7500 ONLY
I am not responsible for anything happens to your phone
Don't forget to enable USB Debugging in Settings=>Applications=>Development
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
First of all you have to install the cwm recovery v 5.5.0.4:
Download Odin3.zip and extract
Download cwm-trebon.zip and extract
Now Open Odin3 v1.85.exe
"Auto Reboot" and "F.Reset Time" must be checked and "Repartion" must be UNCHECKED
Now Click on PDA and select cwm-trebon.tar.md5 That you have extracted
Turn Off your phone and Boot into Download Mode by Pressing Volume Down Key + Home Key + Power
Press Volume Up to Continue
Connect your Phone to PC
Odin3 will detect your Phone and The ID:COM Box will turn yellow
Now hit "Start" Button in odin to begin the Flashing progress
After flashing is done the phone will reboot and you will see "PASS" in Odin
CWM is now successfully installed and you can unplug your phone
Follow these steps to root your device:
Download the supersu package (SuperSu-Trebon-by-danyznd123.zip) and copy it to your external sdcard(DON'T EXTRACT)
Boot your Phone in CWM mode by Pressing Volume Up + Volume Down + Home + Power
Now in cwm press "Install zip from sdcard" than "choose zip from sdcard" and select the zip file SuperSu-Trebon-by-danyznd123.zip than "Yes" to install
Wait until cwm finish the process and navigate to "Reboot System Now"
That's It!Your ace plus is successfully ROOTED!!
Note:The yellow triangle at boot is not important so ignore it.
Press THANKS if i helped You!!
Enjoy!!!

why you copied this?
we already have something very similar!
no need to copy!

..

danyznd123 said:
Why did you judge directly??
The SuperSu zip is made by ME and NOT by kk9999gada
But the procedure is the same and I did NOT copy ANYTHING GO AND CHECK KK9999gada thread and you will see there is alot of diffrence!!
Anyway Happy new year
Click to expand...
Click to collapse
i guess the supersu difference is only a version update? or its an app made by you?
Happy new year as well!

ShadowsDie said:
i guess the supersu difference is only a version update? or its an app made by you?
Happy new year as well!
Click to expand...
Click to collapse
In this zip all supersu binaries all updated and the application also and /system/bin and /system/xbin
And the updater-script is modified also.

danyznd123 said:
In this zip all supersu binaries all updated and the application also and /system/bin and /system/xbin
And the update-script is modified also.
Click to expand...
Click to collapse
ok, good job then and thanks for answer

this is for which android build?sorry i no good in english

aimanyusof89 said:
this is for which android build?sorry i no good in english
Click to expand...
Click to collapse
2.3.6 gingerbread of course

ok thank you guys..i already successful root my phone..if i want to upgrade gingerbread to jellybean,how i can do it ?

aimanyusof89 said:
ok thank you guys..i already successful root my phone..if i want to upgrade gingerbread to jellybean,how i can do it ?
Click to expand...
Click to collapse
Hmm...There are alot of JB custom roms,you can try pure galaxy or cm10 but there are bugs

danyznd123 said:
Hmm...There are alot of JB custom roms,you can try pure galaxy or cm10 but there are bugs
Click to expand...
Click to collapse
ok thank you.i will try you custom rom

aimanyusof89 said:
ok thank you.i will try you custom rom
Click to expand...
Click to collapse
This rom is not builded by me it is by TheWhisp and thnx to him

Over 700 downloads and only 4 thanks!
thats not good
please if i heleped JUST HIT the thanks button

Ok i will have to report to close my thread ...

Question??
Actually i just wanted to ask can i flash ""Supersu-Trebon-by-danyznd123.zip"" using ""twrp recovery"" by "the wisp".?????
I am asking this bcoz i tried "cwm-trebon.zip" month ago and this recovery caused bootloops..
Thatswhy i reflashed stock firmware.
Plz Reply..
Thanxx in Advance..

bibhu60 said:
Actually i just wanted to ask can i flash ""Supersu-Trebon-by-danyznd123.zip"" using ""twrp recovery"" by "the wisp".?????
I am asking this bcoz i tried "cwm-trebon.zip" month ago and this recovery caused bootloops..
Thatswhy i reflashed stock firmware.
Plz Reply..
Thanxx in Advance..
Click to expand...
Click to collapse
Yes you can,
And for fixing a cwm bootloop you can flash it again or any other recovery wothout flashing the whole firmware again and lose root

danyznd123 said:
Ok i will have to report to close my thread ...
Click to expand...
Click to collapse
Why?
I was looking for a rooting method and i've just foud your.

NetBender said:
Why?
I was looking for a rooting method and i've just foud your.
Click to expand...
Click to collapse
I have said this a month ago!Thats not true

Turn Off your phone and Boot into Download Mode by Pressing Volume Down Key + Home Key + Power
I got stuck at the line above. When the Samsung logo apears i still hold the keys. In a split second i see the "clockwork mod recovery" and the phone continue's with booting.
I tried it about 20 times now. Any help!

sjaakfaal said:
Turn Off your phone and Boot into Download Mode by Pressing Volume Down Key + Home Key + Power
I got stuck at the line above. When the Samsung logo apears i still hold the keys. In a split second i see the "clockwork mod recovery" and the phone continue's with booting.
I tried it about 20 times now. Any help!
Click to expand...
Click to collapse
To boot into download mode press the volume up + home + power button it should take u into download mode.
Hit thanks if i helped

best way to root?

Hey all, my brother just gave me his galaxy tab 2 10.1, and this thing is horribly slow. I want to see if it can be saved, what is the best method to root with the following stock setup:
GT-P5113
android version 4.2.2
kernel 3.0.31
build # JDQ39.P5113UEUCMK3

vballrkc said:
Hey all, my brother just gave me his galaxy tab 2 10.1, and this thing is horribly slow. I want to see if it can be saved, what is the best method to root with the following stock setup:
GT-P5113
android version 4.2.2
kernel 3.0.31
build # JDQ39.P5113UEUCMK3
Click to expand...
Click to collapse
Use Odin to flash latest TWRP from @Android-Andi's thread in development section. Use TWRP to flash @Chainfire's SuperSU. Wipe Cache and Dalvik cache in TWRP Wipe > Advanced wipe. Please reply to this if you need more help.

I downloaded hte latest one and i flashed it using oden. When I go to boot into recovery though by holding power button and volume down, after the splash green i get an upright green android for a second then it switches to the android laying on his back with the red triangle coming out of his stomach and the text "No Command" under him. then it goes to the android system recovery. any ideas why i can't get twrp to work? i downloaded GT-I8190_TWRP_2.7.1.1.tar.md5.zip

vballrkc said:
I downloaded hte latest one and i flashed it using oden. When I go to boot into recovery though by holding power button and volume down, after the splash green i get an upright green android for a second then it switches to the android laying on his back with the red triangle coming out of his stomach and the text "No Command" under him. then it goes to the android system recovery. any ideas why i can't get twrp to work? i downloaded GT-I8190_TWRP_2.7.1.1.tar.md5.zip
Click to expand...
Click to collapse
Flash it again in Odin but this time uncheck auto reboot. After it finishes flashing, wait 10 seconds, unplug the tab, and boot into recovery (power + volume up.) Then flash SuperSU in recovery and wipe cache and Dalvik.
Sent from my SGH-T989

jrc2 said:
Flash it again in Odin but this time uncheck auto reboot. After it finishes flashing, wait 10 seconds, unplug the tab, and boot into recovery (power + volume up.) Then flash SuperSU in recovery and wipe cache and Dalvik.
Sent from my SGH-T989
Click to expand...
Click to collapse
recovery is volume down right? not volume up

ok after doing power and volume DOWN i was able to get into twrp, thanks to your unchecking auto reboot trick. Nice call!! does superuser have to be flashed? i think i accidentally downloaded the apk....

vballrkc said:
ok after doing power and volume DOWN i was able to get into twrp, thanks to your unchecking auto reboot trick. Nice call!! does superuser have to be flashed? i think i accidentally downloaded the apk....
Click to expand...
Click to collapse
On my tab its volume up (because it's 7-inch.) Glad you got recovery. Yes, superuser has to be flashed to root. Flashing will install the apk in the system partition and get the su binaries in place. Installing the apk won't because it cannot access the system partition. Once it is flashed, you will be rooted and can access the system and root partition.
Sent from my SGH-T989

jrc2 said:
On my tab its volume up. Just checked. Glad you got recovery. Yes, superuser has to be flashed to root. Flashing will install the apk in the system partition and get the su binaries in place. Installing the apk won't because it cannot access the system partition. Once it is flashed, you will be rooted and can access the system and root partition.
Sent from my SGH-T989
Click to expand...
Click to collapse
yeah i think i unzipped it before i put it on the sdcard of the tablet. So all I had was the apk, I redownloaded the zip and flashed it and i think i'm all good now. Gonna try a rom now, any suggestions for a minimalistic rom tweaked for max performance?

vballrkc said:
yeah i think i unzipped it before i put it on the sdcard of the tablet. So all I had was the apk, I redownloaded the zip and flashed it and i think i'm all good now. Gonna try a rom now, any suggestions for a minimalistic rom tweaked for max performance?
Click to expand...
Click to collapse
SlimKat is. Flash it and Slim Mini Gapps, reboot, do setup, reboot back into recovery and flash AA-Anykernel Slim Test2 and Vendor-Blobs for great performance and battery life. Recovery is volume up on the tab 10, it just looks like down because the volume buttons are reversed on that tab. If you boot into the system and push what you think (and I thought) is volume down, it will go up. I had this tab earlier and it was confusing :/
Sent from my SGH-T989
EDIT: after you flash SlimKat, you do not need to flash superuser or SuperSU. SlimKat is a rooted ROM.

jrc2 said:
SlimKat is. Flash it and Slim Mini Gapps, reboot, do setup, reboot back into recovery and flash AA-Anykernel Slim Test2 and Vendor-Blobs for great performance and battery life. Recovery is volume up on the tab 10, it just looks like down because the volume buttons are reversed on that tab. If you boot into the system and push what you think (and I thought) is volume down, it will go up. I had this tab earlier and it was confusing :/
Sent from my SGH-T989
EDIT: after you flash SlimKat, you do not need to flash superuser or SuperSU. SlimKat is a rooted ROM.
Click to expand...
Click to collapse
where is the download link for AAanykernal? I'm on the page dedicated to it, but i can only fine hte vendorblobs download link under it, no link for AAanykernal....am I just blind and misisng it?

vballrkc said:
where is the download link for AAanykernal? I'm on the page dedicated to it, but i can only fine hte vendorblobs download link under it, no link for AAanykernal....am I just blind and misisng it?
Click to expand...
Click to collapse
Apparently blind (don't mean to be rude, I was just agreeing with you
There is a big all caps download button in the first post (see screenshot)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[Q] [HELP] ASUS ME181c(K011) firmware please

i rooted me181c(k011) and modified bulid.prop. after reboot device, it is in loop-booting.
i can enter recovery mode but there is no stock firmware on internet anywhere.
there is anybody know how to recovery flashing me181c or who have mo181c stock firmware or extract stock firmware that can be used in recovery mod?

nakwonelec said:
i rooted me181c(k011) and modified bulid.prop. after reboot device, it is in loop-booting.
i can enter recovery mode but there is no stock firmware on internet anywhere.
there is anybody know how to recovery flashing me181c or who have mo181c stock firmware or extract stock firmware that can be used in recovery mod?
Click to expand...
Click to collapse
i guess this thing has what you want

during boot loop, are u able to connect using adb?

yes
fake_japanese_guy said:
during boot loop, are u able to connect using adb?
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
me176c(same intel Bay Trail Z3745 and simular spec) has firmware in asus website, but me181c don't. so, i cannot do anything

I don't know if the OP fixed his boot issue, but I wanted to post my experience with this tablet. I tried to root using RootZenFone 1.4.2 and it failed. Found a newer version 1.4.5r so I uninstalled 1.4.2. Then disaster struck. Now, keep in mind, I copy my downloads to my SD card and delete them from the device in case I need the files again or I brick the device and have to return it.
I went ahead a rebooted and ended up with the No Command and the dead Android. Holding the Volume Up while pressing power put me into fastboot, so I tried to do a recovery from there. No dice, same No Command. I tried simply powering off and tried again. Still either No Command or just Fastboot. While in fastboot, I tried to use Kango to root (Hoping it'd fix whatever damage RootZenFone did) and kept getting NeedADB errors. Obviously I couldn't turn on USB debugging.
Then, I decided one last ditch effort before I took the tablet back to best buy (Technically I hadn't voided the warranty since it never did root and attempting to root would be virtually impossible to detect since no files were left on the device - they're on my SD card). I powered off the tablet. While the tablet was still plugged into my PC, I held BOTH the Volume Up and Volume Down buttons and then pressed power. I got the typical ASUS logo, which I was getting before the No Command and Fastboot, but this time the tablet just sat there at that logo. I let it be for a few minutes while I took the dogs out. Maybe about 10 minuted. Suddenly, I heard the new device sound from my PC. it was installing the MTP driver! Looking at the tablet, it now had the Intel Inside logo (That I did not get while I was having boot issues) and about 45 seconds later the tablet is booted normally.
So, for what it's worth, I'd say hold both volume buttons as you power it on and see what happens.

Stock ROMs and Kernel Source for ME181C
Looks like we now have Stock ROMs and kernel source for ME181C on asus dot com at;
/uk/Tablets/ASUS_MeMO_Pad_8_ME181C/HelpDesk_download/
I have model K011, which I think is ME181C.

needing help
First, i would like to say sorry i am not sure how i would post under the correct area. Just saw the reply so figured i would write here.
I have been doing research on how to fix my Trio Stealth-10 ( thought it was a 10.1 but now not sure) MST10-21. 16 gb.
I have done all the factory resets and erasing data and what not under the boot load (not sure if thats what it was called) but the one where i hold down the power button and the vol - did all that i can get my tablet to connect and do all i need it to but now it isnt downloading any aps under google play or updating them so i just have a factory tablet that i cannot add anything on. sometimes will seem like it tried to down load and will just say no internal storage or memory something like that has not said anything lately since i have tried today.
please break things down barney style for me as well i can do comp stuff sometimes but i will say all of you on this site are much smarter then me thanks for the help guys
oh if i can have someone tell me where to actually post this would be awesome

Asus ME181C k011 Bootloop Fix
I bit the bullet today and put this thing in a bootloop to test a restore method. Happy to say it worked. Here we go:
1. https://cloud.mail.ru/public/2b47381cb37c/ADB.rar - This contains adb and fastboot if you don't already have them installed. This also contains the system image that we're going to use temporarily to get this thing restored.
2. Hook it up to your computer and load up Fastboot on the tablet (Volume+ and Power while booting. Let go of power after the logo shows up).
3. Flash the System image ( fastboot flash system system.img) followed by the boot image (fastboot flash boot boot.img)
4. Reboot.
5. https://www.androidfilehost.com/?fid=95857557620392052 - Next, we're going to use a temp version of CWM-Recovery to reinstall firmware. Enable USB debugging, run launcher.bat, type "ACCEPT" and choose T3.
6. You'll auto reboot into CWM-Recovery. Grab the official firmware from the Asus site and install the zip from SD. Once complete, you'll need to reroot the device most likely. If you have a SuperSU zip, install it after you've restored the system.
You're done. This also opens us up for just about anything. Go play with your system. As long as you don't mess up your boot loader, this should save you.

Thanks so much RemmyLee
i just wanted to join and say thanks to RemmyLee.
i rooted my me181c and deleted a whole bunch of stuff i shouldn't.
i could get in to recovery but after that "No Command" screen it wouldn't do a thing. i followed RemmyLee's instructions up to step 4 and then did a reboot as told. Whereupon it found the extracted UL-K011-WW-3.1.23.172-user.zip on the root of my SD card and asked me to do an update which succeeded.
Thanks RemmyLee !

annabel82 said:
i just wanted to join and say thanks to RemmyLee.
i rooted my me181c and deleted a whole bunch of stuff i shouldn't.
i could get in to recovery but after that "No Command" screen it wouldn't do a thing. i followed RemmyLee's instructions up to step 4 and then did a reboot as told. Whereupon it found the extracted UL-K011-WW-3.1.23.172-user.zip on the root of my SD card and asked me to do an update which succeeded.
Thanks RemmyLee !
Click to expand...
Click to collapse
What were the things you have deleted but should not had? About to do the same :cyclops:

Fully Working Method! have to try it a few times, but ultimately Tablet is alive Back!

Root works perfectly! ME181C K011

RemmyLee said:
I bit the bullet today and put this thing in a bootloop to test a restore method. Happy to say it worked. Here we go:
1. https://cloud.mail.ru/public/2b47381cb37c/ADB.rar - This contains adb and fastboot if you don't already have them installed. This also contains the system image that we're going to use temporarily to get this thing restored.
2. Hook it up to your computer and load up Fastboot on the tablet (Volume+ and Power while booting. Let go of power after the logo shows up).
3. Flash the System image ( fastboot flash system system.img) followed by the boot image (fastboot flash boot boot.img)
4. Reboot.
5. https://www.androidfilehost.com/?fid=95857557620392052 - Next, we're going to use a temp version of CWM-Recovery to reinstall firmware. Enable USB debugging, run launcher.bat, type "ACCEPT" and choose T3.
6. You'll auto reboot into CWM-Recovery. Grab the official firmware from the Asus site and install the zip from SD. Once complete, you'll need to reroot the device most likely. If you have a SuperSU zip, install it after you've restored the system.
You're done. This also opens us up for just about anything. Go play with your system. As long as you don't mess up your boot loader, this should save you.
Click to expand...
Click to collapse
Please help! I did exactly as you said, but when I get into CWM and choose the file from my sdcard, it comes back and says:
Code:
Finding update package...
Opening update package...
Installing update...
Installation aborted.
And goes straight back to the menu. No error messages or anything.

There is another zip file inside UL-K011-WW-3_1_23_172.zip.
1) Extract UL-K011-WW-3_1_23_172.zip
2) Rename UL-K011-WW-3.1.23.172-user.zip to user.zip.
Then follow Tethered CWM recovery steps.
gtamgs15 said:
Please help! I did exactly as you said, but when I get into CWM and choose the file from my sdcard, it comes back and says:
Code:
Finding update package...
Opening update package...
Installing update...
Installation aborted.
And goes straight back to the menu. No error messages or anything.
Click to expand...
Click to collapse

Hi guys is there anyway to load firmware without root. I just received device but after charging and pressing power I get the message "NO COMMAND" I tried recovery but I''m only giving the option to reboot go into recovery or Botreboot. So it sounds like recovery is not installed. I am trying to avoid sending it back. Is it possible to load original firmware without root?????

i have reached step 5. then when i press T3 and hit enter it says ERROR FAILED TO COMMUNICATE WITH DEVICE
please help me i am new to this and i have ruined my tablet. if i dont manage to reinstall stock firmware i wont be able to use it.

Yeaaah thanks for the method, works succesfully