Hey everyone I am very green to roms and modding .I have a Samsung galaxy GT-P5113 it had 4.2.2 prior to my messing it up I was attempting to remove many of the stock apps from it and attempted to root it. In the process of do that I must have neglected to do a step. because now it boots only to the samsung logo with the blue glow and no further sometimes I get it to the point where I can enter my user information. but just before it reboots after I have entered the user info I get a message that "unfortunately the set up wizard has stopped working . then it goes back to booting only to the samsung glowing logo.
I have tried to down load other roms to try to see if tey may work but no luck I used odin 1.85, 3.07 but no joy tried;CF-Auto-Root-espresso10wifi-espresso10wifibby-gtp5113.tar no luck;Slim-p5110-4.4.2.build.3-OFFICIAL-3079.tar no joy;checked the tar file with MD5 summer and found error in every .tar i downloaded. I even went into recovery mode trying to install a rom from the sd card but got the error E:sdcard failed to mount. I am at my wits end can anyone shed some light on what I can do, or what files I need to fix it a step by step guide would be helpful as all those I followed didn't help.you can email me any help to my email:[email protected] I am very desperate about now its been three days working on this.:crying::crying::crying::crying:
Thanks guys
Related
Hey,
I've tried searching similar threads for this issue but haven't found a solution that works quite yet.
I have Samsung S Vibrant GT-I9000M on which I tried to originally flash CyanogenMod. At first I tried using Clockworkmod and discovered I couldn't actually get into it because of the Samsung 3e recovery utils. So I tried flashing to a different firmware (I've tried a lot now) to get to 2e but I am unable to get past the loading screen, which is flashing the samsung galaxy s logo. I've followed a lot of guides to try to get back to stock firmware but I haven't had any success at all.
I can't get into recovery mode anymore but I can get into download mode, and I've been trying to get back to stock firmware but whatever I try it just reboots and starts flashing a loading icon (if the usb is still plugged in, without it just flashes the samsung s galaxy screen). I've also noticed that the model number changed from GT-I9000M to GT-I9000.
I'm new to all of this, so if anyone can lend a helping hand I'd really appreciate it. So to summarize, I can get back into download mode but I cant' get into recovery. I've tried at least 5 or 6 times to reflash stock firmware (following the guides in this forum, I can link if needed) but its the same result each time. A cycling loading screen.
this guy is having the same problem.. see my posts in his thread.. do all the things i have told him to do..
http://forum.xda-developers.com/showthread.php?t=1022688
Ok so I have tried on another thread that kind of went dry mainly cause I was MIA....but now I am back and have done some more reading up and think it is safe to say rooting and trying customer ROM's is not for me...lol I pretty much messed up a new Galaxy Tab 2 7' brand new only after a few weeks trying to root it. I had another thread link below:
http://forum.xda-developers.com/showthread.php?t=1834368&page=2
But I did not get anything to work right. At this point I am really just looking to get the tablet working. I don't really care what firmware rooted or unrooted...i just want to be able to use it....do some more research and and maybe join the rooting community again when I get a Galaxy S3.
I'd appreciate any help. I am pretty stuck right now!
Go into Download mode "power" plus "down volume", then up volume. Use ODIN to load this:
http://forum.xda-developers.com/showthread.php?t=1645295
ODIN
http://forum.xda-developers.com/attachment.php?attachmentid=581913...
You will need driver from Samsung Keis install for P3113
http://www.samsung.com/us/support/owners/product/GT-P3113TSYXAR
FYI - I needed to load CMOC10-Kernel to get my tab to stop boot looping when I flashed JB AOKP
bark777 said:
Go into Download mode "power" plus "down volume", then up volume. Use ODIN to load this:
http://forum.xda-developers.com/showthread.php?t=1645295
ODIN
http://forum.xda-developers.com/attachment.php?attachmentid=581913...
You will need driver from Samsung Keis install for P3113
http://www.samsung.com/us/support/owners/product/GT-P3113TSYXAR
FYI - I needed to load CMOC10-Kernel to get my tab to stop boot looping when I flashed JB AOKP
Click to expand...
Click to collapse
Worked like a charm....you made it simple! Thanks!
Continous boot loop on tab 2 p3113
My problems are kind of different from all the others I have read. Yes it is similar that it boot loops. But mine freezes at different areas in boot mode. This is driving me crazy and I am spending way too much time and effort trying to fix it. Hopefully you can help.
I don't really know for sure if the android os was 4.1.1 or 4.1.2 or some other rom but it did state in download mode that it was original and not custom rom.
I received this tab from ebay and it is new never used, but somehow whoever had it probably tried to flash it and now I received it with a continuous loop. They stated that it stuck in SAMSUNG logo. I found it true but it also stuck other places as well. I did do a reset first before I attempted to flash it.
I did the Odin flashing.I found the 4.2.2 xar file HOME_XAR_P3113UEUCMK3_1978026_REV04_user_low_ship.tar.md5 and did according to instructions. But that didn't work. It did boot into android but it didn't stay there very long and rebooted itself. I couldn't stay more than 20-30 seconds and it would reboot itself or freeze at various places in android. I also hard reset it. Still same thing. It would also freeze on the first samsung logo tab 2 screen and also at the blue circle with samsung logo. It was different every time. I would have to hold down the on button until it rebooted. It also stalls or freezes during Android upgrading... Optimizing app at various number stages sometimes it goes thru that and then to the next phase of installing apps then it freezes again. I cannot get it to work if I try to upgrade via wireless upgrade to samsung. it will freeze even before it downloads the upgrade file.
I then flashed back to the original xar file P3113UECLK7_P3113XACCLK7_XAC which is 4.1.1 That worked a little better, but it freezes and also the sound chatters when it freezes on bootup you know, when the samsung sound comes on then the blue circle.
Finally I tried to recover or flash from the recovery mode using the upgrade from a sdcard. using the original 4.1.1 xar file. It hewlped a little but still doing the continuous boot loop at different stages but it gets to the Android is upgrading... more often. It freezes always now.
So I don't know what else to do. You mentioned a CMOC10-Kernel to load, how does one go about doing that and what are the steps.
Thanks in return if you can suggest things.
Wayne
My friend gave me GT-I9003 flashed with remic rom but there was problem many function which used there before flash not there. so i tried myself to flash and i used http://theunlockr.com/2013/04/25/how-to-flash-a-custom-recovery-on-the-samsung-galaxy-sl-gt-i9003/
for instruction and i used clockworkmod recovery from http://forum.xda-developers.com/showthread.php?t=1198158.
but after flash my phone kept restarting though 'pass' appeared and i tried both XXKPE from that site and bagaria-09.GT-I9003_PDA.tar also and also tried to recover but after sometime it became worst and recovery mode did not appeared. then i searched a lot and tried many thing. i also used http://forum.xda-developers.com/showthread.php?t=1133787
and download XXKPE and follow every step. i tried every step but no progress. when i power on my phone just stuck in initial stage where name of brand and model appear. please somebody help ..this is not my phone
Thank you in advance
I've managed to get myself so confused and flustered I don't even know where to go at this point.
A couple months ago I got tired of waiting for Samsung to send out the 4.1.2 Android update so I grabbed the Odin version and updated it myself.
I like it well enough but I want to try putting CyanogenMod 10.1 on my P6210. I tried everything last night and it's turned into a long chain of things that won't work.
The bottom line seems to be that I can't change the recovery mode - I've tried installing goo.im; no joy. I have tried several versions of CWM - no luck. Every time I get the "signature verification" error if I try from stock Android Recovery; if I try from Odin I just get a big "FAIL" message; I've tried with Heimdall and I just get partition errors.
I've reached a point where I don't know what to do - I'd really like to strip it down to basics but I've definitely reached a point where I'm over my head.
Any help would be hugely appreciated...
Hey guys, so I'm up for a new phone (had this phone for 2 years) and I remember having a friend root + flash me the cyanogenmod on my Samsung Galaxy S3
I decided to root/flash my current phone (Galaxy S5) and i ended up ****ing in on several fronts.
The following is what I did and where I ended up
Rooted phone through Odin - was successful but I got a feeling it was outdated as I got the Seandroid kernal thing in red
Got ROM Manager and flashed recovery to TWRP - successful
Flashed ROM to Cyanogenmod nightly 7/14/16 - used the wrong version so i couldn't use my phone to call
Flashed Rom to the correct version - successful
Installed Gapps zip so i can use the app store and etc - experienced issues as it was always saying the store failed and etc
Now where I am currently
I ended up wiping all the data and etc so I can flash back to the Stock ROM/firmware since I couldn't get the Gapps to work.
I tried to flash the firmware but everytime I flash it and it boots to the stock recovery and says "installing android update" it gets to 1/3rd where it says "Erasing" and boots up to the Sprint Logo where the Blue notif is on and it is stuck.
I'm assuming its soft bricked and on a bootloop and I am trying to see if I can salvage this phone.
I tried flashing different version of the firmware (my brother has the same phone his version is G900PVPS3CPE2) and i tried that and G900PVPU3CPA. Both times its says its successful on odin but upon booting it only gets 30% before it says erasing and returns to get stuck on the boot.
Can I salvage this phone and if so can someone guide me through the proccess (links to proper firmware download/etc)
I do not care if any data/apps is lost (i have important stuff backed up on my gmail), I just want my phone to work.
That being said, my phone is salvageable instead of guiding me to repairing my phone to stock, if they can guide me to set my phone to a custom ROM (cyanogenmod or anything they suggest assuming they can get the googleapps to work on it) can someone please guide me through that.
Thanks again for reading.
Edit: All info in a TLR format incase my wall of text was messy
Phone: Samsung Galaxy S5 SM-G900P (SPR) Android 6.0.1
problem: ****ed up with flashing now phone is stuck in bootloop
What I want: Find a solution to make my phone work, ideally to make it work using a custom rom(any works) that has a working google apps installed.