I've tried to install Nexus G +, I've done everything as I've always done: wipe data, cache, dalvik, format system. But when i reboot the phone it will not boot and stuck on the logo, I've Also 20 minute wait but nothing happen. Also I've re installed the firmware originale just to be sure but there seems to be no way to make any custom rom start. Could Someone help me?
LiwOliveira said:
I've tried to install on my bike Nexus G+ g
Click to expand...
Click to collapse
You've tried to install Nexus G on your Bike? :laugh:
Sorry for no solution. But this was quite the funniest what i have read in the Moto G forum.
Related
Hi guys, could you help find a right thread for my problem?
Yesterday my optimus got restarted and won't start anymore. I can get to the recovery menu (Android System Recovery (3e)), I performed both factory reset and wipe cache partition but after reset it still hangs on the LG logo.
Phone is rooted but that`s pretty much it.
Is there a way i can flash a new rom (don`t care if custom or stock)?
thanks a bunch
jing-jang said:
Hi guys, could you help find a right thread for my problem?
Yesterday my optimus got restarted and won't start anymore. I can get to the recovery menu (Android System Recovery (3e)), I performed both factory reset and wipe cache partition but after reset it still hangs on the LG logo.
Phone is rooted but that`s pretty much it.
Is there a way i can flash a new rom (don`t care if custom or stock)?
thanks a bunch
Click to expand...
Click to collapse
Hi,
I don't understand why you had wipe your cache partition ?
But it's not the real problem.
So you can try this => LG Optimus Net unofficial thread
and this => [HOWTO] Flash DOWNLOAD firmware on P690
Thanks to my colleague @It_ler for this link
So today I got a phone call and when I went to pick it up, my phone restarted and is still in the boot animation. this has happen a couple of times on rare occasions but not this long. It has been in the boot animation for over 3 hours. I've restarted the phone and everything and can't seem to make it boot in. Anyone know a fix or should i just re flash the Rom over ADB?
killerdann11 said:
So today I got a phone call and when I went to pick it up, my phone restarted and is still in the boot animation. this has happen a couple of times on rare occasions but not this long. It has been in the boot animation for over 3 hours. I've restarted the phone and everything and can't seem to make it boot in. Anyone know a fix or should i just re flash the Rom over ADB?
Click to expand...
Click to collapse
wipe cache on recovery.See if it boots.
shoeseat said:
wipe cache on recovery.See if it boots.
Click to expand...
Click to collapse
I tried it and for now its still in the boot animation, its been about 10 minutes.
killerdann11 said:
I tried it and for now its still in the boot animation, its been about 10 minutes.
Click to expand...
Click to collapse
did you wipe cache partition? If it's not working then you have you flash it again or install L ROM from zip without wiping system.
shoeseat said:
did you wipe cache partition? If it's not working then you have you flash it again or install L ROM from zip without wiping system.
Click to expand...
Click to collapse
Ya I went into recovery and wiped my cache, at this point I'm thinking of just re-flashing L again.
There is already a sticky Thread http://forum.xda-developers.com/google-nexus-5/help/android-l-developer-preview-help-t2796217 Please don't open thread regarding android L elsewhere and continue there.
Hello everyone!
I tell you yesterday my nexus 5 suddenly stopped working.
Restarts and fails to enter the desktop , running in an infinite loop when Google logo appear.
I tried to flash the images and the problem continues . I dont know what else to do for the boot disappears. I also made a clean install and wipe .
Some of you could help me ?
joniii said:
Hello everyone!
I tell you yesterday my nexus 5 suddenly stopped working.
Restarts and fails to enter the desktop , running in an infinite loop when Google logo appear.
I tried to flash the images and the problem continues . I dont know what else to do for the boot disappears. I also made a clean install and wipe .
Some of you could help me ?
Click to expand...
Click to collapse
Why create a new thread?
Full wipe/factory reset, then flash the entire factory image set.
Look here if you don't know what to do:
http://forum.xda-developers.com/goo...urce-guides-info-threads-linked-read-t2784527
I've done it more than 10 times the full wipe and still not working. Same with factory flashes...
Are you getting any errors when flashing stock with fastboot?
joniii said:
I've done it more than 10 times the full wipe and still not working. Same with factory flashes...
Click to expand...
Click to collapse
Are you trying to flash the lollipop or kitkat factory image?
Anyway, after flashing when you get the bootloop, go to fastboot and flash a custom recovery and then do a factory reset, cache and delvik cache wipe. This should do the trick.
theesotericone said:
Are you getting any errors when flashing stock with fastboot?
Click to expand...
Click to collapse
no errors when im flashing, all OK with "./flash-all.sh".-
dinuweera said:
Are you trying to flash the lollipop or kitkat factory image?
Anyway, after flashing when you get the bootloop, go to fastboot and flash a custom recovery and then do a factory reset, cache and delvik cache wipe. This should do the trick.
Click to expand...
Click to collapse
i did all that you tell me. i do a factory reset, cache and dalvik but my N5 doesnt work. Continue in an infinity loop :/
I downloaded the image-hammerhead-lrx21o, radio-hammerhead-m8974a-2.0.50.2.21 and bootloader-hammerhead-hhz12d.
Any idea?
Try flashing a kitkat rom by the "Ncry" tool. Click the Restore menu button and select device and rom.
impossible
always stuck in and infinite bootloop... i think any component (hardware) isnt working well
joniii said:
no errors when im flashing, all OK with "./flash-all.sh".-
i did all that you tell me. i do a factory reset, cache and dalvik but my N5 doesnt work. Continue in an infinity loop :/
I downloaded the image-hammerhead-lrx21o, radio-hammerhead-m8974a-2.0.50.2.21 and bootloader-hammerhead-hhz12d.
Any idea?
Click to expand...
Click to collapse
Flash the whole image (radio, image, bootloader) in fastboot by typing in cmd: flash-all. This will wipe the device but will not cause problems.
i did it too bro, but nothing...
Here im posting a video i recorded for you... (i put a song from youtube to mute the sound of my room)
https://www.youtube.com/watch?v=q-JjjzSfhF4
Any idea please?
joniii said:
Any idea please?
Click to expand...
Click to collapse
Looks like a hardware problem. Either Google RMA or LG Repair.
I bought it in Amazon
May i have rma if I bought on Amazon?
LG Chile doesnt has official repair...
So I had to buy another cell, a moto x 2014.. Bye nexus
it looks like hardware is at fault, can you relock the bootloader?, do that if so, i dont know if amazon do rma, contact them and find out,
strange if you get no issues while flashing,
I think so. I will check about invoce and RMA.
Thank all of you
First of all: I made a thread about bricking my Moto G earlier, but since this is a new issue (and a new Android version) I thought it would be better to make a new thread
So as some of you might have noticed yesterday there was the first release of CM13 for the Moto G and if you had nightlies enabled (like me) you'd just get it as a normal update, except for having to install the new Gapps of course. The problem is I didn't notice that it was CM13 until it was too late... First thing that happened was of course that my Google Play Services we're not working anymore. I tired flashing Gapps for 5.1 but it said that I used the Gapps for the wrong Android version. So I looked in the settings and noticed that I had Android 6.0 . Now I tried flashing OpenGapps for Android 6.0, which worked, but as soon as I booted Android it told me something like "Setup Assistant stopped working" over and over again, so I tried reverting to my latest CM12.1 backup I had, which was a bad idea... My phone was stuck in a bootloop and everytime I tried wiping my phone (except for internal storage) it rebooted when wiping data. Reflashing TWRP didn't help, so I tried flashing stock Android with mfastboot and it got to the point where it was optimizing apps but after that it just did the same thing again (classic boot loop).
Here's my question: How can I get TWRP working again and install CM13 (again if possible without wiping my internal storage or at least being able to back some files up) ?
Can u access TWRP?
Andus1988 said:
Can u access TWRP?
Click to expand...
Click to collapse
Yes I can, flashing and wiping works, except when trying to wipe data
Then don't wipe data?! Wiping data isn't necessary every time!
Andus1988 said:
Then don't wipe data?! Wiping data isn't necessary every time!
Click to expand...
Click to collapse
I know but if I only wipe dalvik, cache and system it didn't work.
Now I tried booting into TWRP and it shows the "no command" screen :'(
I'll write u a PM
I have the same problem would be nice if someone have a solution.
Guys i have a similar problem here, i got the latest update downloaded (cm-13.0-20151207-NIGHTLY-peregrine.zip) and when i clicked on update, the phone went black and nothing work now, i cannot get into fastboot or anything else, it only show "qhsusb_bulk" when I plugged in to the computer, any help??? i would really appreciate it .
Hi, I downloaded the Evolution X 5.9 surya unofficial zip file in my internal storage and then went to TWRP.
I watched a tutorial on Youtube so I wiped Dalvik/Art Cache, Data, and Cache before flashing the custom rom (wiped the dalvik/art cache again before pressing boot to system)
I thought it was going well but then my phone is now stuck in a bootloop where it's just stuck in Fastboot mode. Currently trying to fix it..
I just want to know what could have caused this? And if I did the whole process wrong? I want to try out the Evo X custom rom, I'm willing to try and flash the rom again once I've gotten out of the bootloop, but I'm anxious I'll mess up again. I've never unlocked my bootloader and flashed a custom rom before, so forgive me.
EDIT: any possible fixes for getting out of the bootloop would be really appreciated too!
EDIT2: I may have really messed up. I decided to press the power button while in Fastboot, and then now it's just a black screen. Windows won't recognize it anymore...
Which firmware you used before flashing the evolution x