[CM ROM [hlte/universal] OFFICIAL CyanogenMod Builds (Nightlies) Maintainer Thread - Galaxy Note 3 Android Development

Official CyanogenMod maintainer thread
Builds thread: http://forum.xda-developers.com/showthread.php?t=2653028.
FAQs (please read before asking questions):
Does this build work on the 4.4 bootloader? Yes! It works on the 4.4.2 NA6/NA7/NB3 bootloaders.
Is this build stable? No. There will be issues (see known issues below)
Where can I get the latest recovery that is compatible with this ROM? http://d-h.st/users/xiaolu/?fld_id=31963. You can also use the latest version of TWRP.
Can I update OTA from an hltexx, etc. build to an hlte build? No.
Is there any advantage to upgrading to the 4.4 bootloader? No, not really, unless you call not being able to downgrade an advantage .
Can I downgrade from a 4.4 bootloader to a 4.3 bootloader. No (you can thank Samsung for that)! The only exception to this is if you have a Canadian variant of the Note 3. Then, you can downgrade
Can I install this on an Eyxnos device? No!
Which GApps should I use? I would recommend the Paranoid Android GApps. You can them from here: http://forum.xda-developers.com/showthread.php?t=2397942. If you want the Nexus experience, get the GOOGLE STOCK PACKAGE.

Changelog
http://www.cmxlog.com/11/hlte/

Known issues:
See: http://wiki.cyanogenmod.org/w/Known_Issues_page_for_hlte.

Heck yeah thanks again for all you guys help
Sent from my SM-N900T using Tapatalk

The first one ! --> http://download.cyanogenmod.org/?device=hlte xD

Anybody having bad WiFi signal like me ? Even if I am near the modem the signal only 2 bars !..
N9005.
Last nightly with stock kernel
Sent from my SM-N9005 using Tapatalk

Hey great OP I hope you keep this update unlike the last thread by that other guy!

hussaination said:
Anybody having bad WiFi signal like me ? Even if I am near the modem the signal only 2 bars !..
N9005.
Last nightly with stock kernel
Click to expand...
Click to collapse
WiFi seems to be working fine here.
Did you dirty flash from a different ROM?
Please also check whether there's an updated firmware for your router. We tend to blame the receiving end - phone, tablet, computer - but a good number of times a crappy router firmware is the culprit.

springer.music said:
WiFi seems to be working fine here.
Did you dirty flash from a different ROM?
Please also check whether there's an updated firmware for your router. We tend to blame the receiving end - phone, tablet, computer - but a good number of times a crappy router firmware is the culprit.
Click to expand...
Click to collapse
I did a clean installation.. Lol but the problem was from the router itself.upgrading the firmware did the trick..thanks
Sent from my SM-N9005 using Tapatalk

How is this build? Any issues?

jetbruceli said:
How is this build? Any issues?
Click to expand...
Click to collapse
Getting time to store on device is the main issue, LED notification light second.

jetbruceli said:
How is this build? Any issues?
Click to expand...
Click to collapse
- The LED doesn't seem to work
- Some sensors (e.g. humidity and temperature) work immediately after boot but stop working after the phone goes to deep sleep for some minutes
- In Settings > More > Mobile networks it's still impossible to set a Preferred network type (you can select a network type but it so doesn't stick)
- In Settings > More > Mobile networks you get a crash when selecting Provider settings

LED not working and no pen
---------- Post added at 06:52 PM ---------- Previous post was at 06:51 PM ----------
springer.music said:
- The LED doesn't seem to work
- Some sensors (e.g. humidity and temperature) work immediately after boot but stop working after the phone goes to deep sleep for some minutes
- In Settings > More > Mobile networks it's still impossible to set a Preferred network type (you can select a network type but it so doesn't stick)
- In Settings > More > Mobile networks you get a crash when selecting Provider settings
Click to expand...
Click to collapse
what app used for temperature and humidity? thanks in advance :good:

rubino90 said:
no pen
Click to expand...
Click to collapse
The S-pen works fine for me.
You can also enable some pen-specific gestures under Language & Input > Stylus gestures.
For a few extra features try CM SPen Addon + Note Buddy from the Play Store. Highly recommended. :thumbup:
what app used for temperature and humidity? thanks in advance :good:
Click to expand...
Click to collapse
There a quite a few apps which can read the humidity and temperature sensors:
- Galaxy S4 Sensors
- Sensor List
- Sensor Readout
- Sensor Sense
- Sensor Test
- Sensors
They are all available on the Play Store.
On a different note, an app which can be very useful if/when you're wearing gloves is Galaxy S4 Glove Mode (it works well on the GN3 with CM11). You'll find it on the Play Store.

All,
Third post updated with known issues. Let me know any more and I'll add them.
By the way: first post = FAQs, second post = changelog, third post = known issues. Do NOT make your own posts detailing this information. IF anybody has any common questions, direct them to the first post.
This build works on the 4.4 bootloader right? I haven't tested it.

AlecRobertson said:
All,
Third post updated with known issues. Let me know any more and I'll add them.
By the way: first post = FAQs, second post = changelog, third post = known issues. Do NOT make your own posts detailing this information. IF anybody has any common questions, direct them to the first post.
This build works on the 4.4 bootloader right? I haven't tested it.
Click to expand...
Click to collapse
Yes it does, working on both 4.4.2 NA6/NA7/NB3 bootloaders.

Found a bug. Was listening to an audiobook, and was browsing the XDA app. The display then went all wonky (tons of colors/static lines). The audiobook kept playing, but the screen was then unresponsive, I had to reboot to fix it.
Sent from my SM-N900W8 using XDA Premium 4 mobile app

skadude66 said:
Found a bug. Was listening to an audiobook, and was browsing the XDA app. The display then went all wonky (tons of colors/static lines). The audiobook kept playing, but the screen was then unresponsive, I had to reboot to fix it.
Sent from my SM-N900W8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
See if it does it again. If so, post and I'll add it to known issues.

just purchased 'weather station pro'
seems very good so far. I recommend others to try it if you are looking for a weather app, with extremely useful logging.
but with this rom the sensors do work and stop when the choose. but the app is good! haha.

Anybody install Pandora successfully? I've wiped the sdcard for a clean install, tried installing the .apk, pushing it to /system/app, tried restoring with titanium, and tried the app store all to no avail lol. Everything else seems great, couple small issues as mentioned but its great to be back on cm!

Related

[APP]Smart Stay Ex

Hi guys I found this app was up for beta testing here at XDA developed by elnoxvie, its similar to Smart Stay & works on GB ROMs too. I'm posting it here so that if any there are any compatibility problems with our handset it could be ironed out by the developer.
- Go to the following thread: http://forum.xda-developers.com/showthread.php?t=1708012
- Get the latest beta & test it on your R.
- Report on the same thread your observations & problems you faced.
- Beta testers will get a discount.
The app is out of Beta & is available at the Play store. I have done beta testing for the app with my stock GB ROM, it was working fine & Galaxy R has been granted support. But it may not work on some custom ROMs.
Here are links:
1. SmartStay Ex Lite
2. SmartStay Ex Pro
Cheers!
Bro I read you wrote there that it is working for you but it is not for me on NEO ROM 2.1!!
I can only hear Stupid camera clicks and the screen goes off even if i am watching it.
I hope you be the Representative there and Report all the issues faced so that we can get a Nice Working Release !:angel:
maheepmaurya said:
Bro I read you wrote there that it is working for you but it is not for me on NEO ROM 2.1!!
I can only hear Stupid camera clicks and the screen goes off even if i am watching it.
I hope you be the Representative there and Report all the issues faced so that we can get a Nice Working Release !:angel:
Click to expand...
Click to collapse
You'll have to report yourself cause he may try to understand your problem & ask you submit logs which only you can do.
So I'll request everyone to post your observations after testing it in the original thread as it'll help the developer in making it fully compatible with our device.
Ehhh !! i installed this app, but how do i know whether this is working or not, i can only hear camera clicks !!
I've installed it for some minutes. I think that you need to restart the phone after installing the app, but, first, enable the boot option inside it.
I suppose that those clicks are real photos been taking by the phone, I also hear it... just a bug. The app is trying to analyze the face and it's searching for the eyes.
If you want to try it, set the display timeout to 15s (in phone's settings), turn on your room's light and put the mobile to a reasonable distance from your face, you'll see that it doesn't switch off the screen, after this, just leave it far from you and, if everything is ok, it should go to sleep in some seconds.
The software need to mature a lot, it consumes tons of CPU time and, eventually, it starts to eat all the ram and CPU, leaving your phone in a semi-freezed mode, I was able to restart it but took some time.
Besides that, it did its function, it kept the display on while I was watching at it, and afterwards it put it to sleep.
Force Close on NeoRom 2.1
sux
Sputnik. said:
Force Close on NeoRom 2.1
sux
Click to expand...
Click to collapse
I would request you to submit the logs to the developer so that he could try to understand the problem & rectify if possible.
'cooleagle' said:
I would request you to submit the logs to the developer so that he could try to understand the problem & rectify if possible.
Click to expand...
Click to collapse
If you could tell me where I can find the log files I'd upload them..
Thx
Gesendet von meinem GT-I9103 mit Tapatalk
Sputnik. said:
If you could tell me where I can find the log files I'd upload them..
Thx
Gesendet von meinem GT-I9103 mit Tapatalk
Click to expand...
Click to collapse
By sending a log you are sending some sensitive information to this app's developer. I think this is how it's done though I'm not 100% sure:
- First download & install the new v1.4 of the app.
- Now start /open the app, after clicking on 'OK' lock your device once by pressing the lock key.
- Now click on 'Send Logs' in the app. It'll ask you to download & install a log collector app so install it & open it.
- Next Tick 'Debug' and go through the process of running the app when you are facing the front Cam with some distance between you & your front Cam so as to let it try to detect your face. Now let it run once when you do not face the front Cam.
- Next Click on Send logs once again then click on OK.
- It'll then allow you to Email the log to this app's developer.
- If the app works then don't send the logs.
Hope this helps. Cheers !
App is out of Beta & it's available for download at the Play store. Check OP for the links & more info.
Cheers !
Thx @ cooleagle
ex lite version works though
it is working
Interesting app, but it fails to recognize in landscape mode. Also uses too much cpu, and phone lags while shooting images.
nRoof said:
Interesting app, but it fails to recognize in landscape mode. Also uses too much cpu, and phone lags while shooting images.
Click to expand...
Click to collapse
It does work in landscape mode AFAIR but it's hard to keep your face in the field of view of the front camera in the landscape mode.
Yep you are right about others except the lagging part but that can vary from person to person.
The app is working, however, the shutter sound is very annoying. Just imagine when you fall asleep and suddenly hear that noise.
Adam77Root said:
The app is working, however, the shutter sound is very annoying. Just imagine when you fall asleep and suddenly hear that noise.
Click to expand...
Click to collapse
There's an option to turn off the shutter sound but it's a temporary fix as it switches the handset into 'Silent' mode for the duration of the shutter sound which affects others functions of the handset as well.

[TEST] Root Call Blocker/ Call Master/ Project Delta needs help with issues on RI JB

Hi guys. Im one of the developers of Root Call Blocker and a number of other apps using a custom build root telephony layer. There have been recent reports of our apps behaving badly with the new official JB updates.
We need people to check whether this is true - especially people with CDMA devices which we have no access to. Either way, please download the free versions of the apps in question (look at bottom of post for links) and perform some simple tests:
- call yourself from blocked numbers
- text yourself from blocked numbers
- mms yourself from blocked numbers (CM/Delta only)
If something seems to be working fine, please try again just in case. If you have problems, go to Settings and find the "Write to us" item. Once you click on it, be sure to mention in the description field that youre from xda - just put XDA TEST or something.
If you can, please try to include the number that was supposed to be blocked - the logs consist of thousands of lines, so that will help a lot.
Root Call Blocker - https://play.google.com/store/apps/details?id=fahrbot.apps.rootcallblocker.beta
(trial allows one item, you can use groups to block more)
Call Master - https://play.google.com/store/apps/details?id=fahrbot.apps.blacklist
(this one is completely free)
Thanks in advance. Also, you can write about problems here if you like!
There is no JB out for the RazR i. As soon as it will be released, i'm jumping in :thumbup:
BTW: There is no CDMA Version of the RazR i. It's GSM only (correct me if i'm wrong)
Sent from my XT910
HSD-Pilot said:
There is no JB out for the RazR i. As soon as it will be released, i'm jumping in :thumbup:
BTW: There is no CDMA Version of the RazR i. It's GSM only (correct me if i'm wrong)
Sent from my XT910
Click to expand...
Click to collapse
Ah ok thanks. Didnt realise, just posted in all the newer moto devices for max effect. Might keep the thread open for general feedback though...
Its working absolutely fine for me.
ftgg99 said:
Ah ok thanks. Didnt realise, just posted in all the newer moto devices for max effect. Might keep the thread open for general feedback though...
Click to expand...
Click to collapse
Well it works perfectly regardless.
norsepriest said:
Well it works perfectly regardless.
Click to expand...
Click to collapse
I don't know about you, but on my rooted Razr I the root call blocker is not working because after I gave root access to app my mobile network signal is gone.I have waited 20 minutes for the signal come back but it not happened.I have used the latest app available on google play.

[ROM] [ACE] [4.2.2] [cfX-Toolchain 4.8.y+] codefireXperiment Nightlies + Weeklies

This new Android distribution treats development differently than any other. CLICK HERE FOR THE ROM, THREAD, CHANGELOG, AND DISCUSSION.
A post detailing our team and new developers from TeamEOS can be found in the OP linked.
Enjoy, and thank you for choosing codefireXperiment
synergye said:
This new Android distribution treats development differently than any other. CLICK HERE FOR THE ROM, THREAD, CHANGELOG, AND DISCUSSION.
A post detailing our team and new developers from TeamEOS can be found in the OP linked.
Enjoy, and thank you for choosing codefireXperiment
Click to expand...
Click to collapse
http://screencloud.net/v/lgdB
sure thing!thats a nexus 4 link btw
found the folder after looking a bit
http://downloads.codefi.re/synergy/codefireXperiment-Ace
Will download and report back.
Steam. said:
http://screencloud.net/v/lgdB
sure thing!thats a nexus 4 link btw
found the folder after looking a bit
http://downloads.codefi.re/synergy/codefireXperiment-Ace
Click to expand...
Click to collapse
Shoot, hold on a minute. New site is on a new server, so the dns change must not have taken effect quite yet for you.
Edit: we're good now. Sorry about that. new site is also more difficult for people to spam...I'm hoping. We'll see.
synergye said:
Shoot, hold on a minute. New site is on a new server and site, so the dns change must not have taken effect quite yet for you. Here's a proper link to the sub we were using prior to the switch
Click to expand...
Click to collapse
Yeah, this works properly, thanks.
EDIT: Whenever a link is clicked it redirects to www.codefirex.com, and it puts me on the "old" site, with all the spam.When I delete www from the beginning and it remains just codefirex.com, it loads up just fine with the new look and all.
Steam. said:
Yeah, this works properly, thanks.
EDIT: Whenever a link is clicked it redirects to www.codefirex.com, and it puts me on the "old" site, with all the spam.When I delete www from the beginning and it remains just codefirex.com, it loads up just fine with the new look and all.
Click to expand...
Click to collapse
Fixed now at least on google DNS. Apologies, should have waited to post until I was sure the dns switch was ready.
synergye said:
Fixed now at least on google DNS. Apologies, should have waited to post until I was sure the dns switch was ready.
Click to expand...
Click to collapse
No need to apologize, you've done a great deed so far on these forums.Flashing atm, will report back.
EDIT: Confirming the site works just fine now, even with www upfront.
---------- Post added at 03:56 AM ---------- Previous post was at 03:49 AM ----------
Steam. said:
No need to apologize, you've done a great deed so far on these forums.Flashing atm, will report back.
EDIT: Confirming the site works just fine now, even with www upfront.
Click to expand...
Click to collapse
Everything works lagfree, I am downloading Google Maps to try out now cause users have reported bugs with it in 4.2 builds around here, so I'm gonna test that too.
EDIT2:N̶o̶ ̶b̶u̶g̶s̶ ̶o̶n̶ ̶G̶o̶o̶g̶l̶e̶ ̶M̶a̶p̶s̶ ̶e̶i̶t̶h̶e̶r̶.̶Perfectly smooth, although I'd change the launcher afterwards, but that's a personal preference.
EDIT3: Spoke too soon, the whole map twitches up and down when I'm moving on the map.It doesn't really matter for me as I don't use Google Maps but CoPilot, and that is working perfectly.It was reported on CM's bugtracker on how to fix it, but I just can't find the report on there now.Maybe tomorrow, it's already 4AM here.Thanks for yet another great ROM!
Steam. said:
No need to apologize, you've done a great deed so far on these forums.Flashing atm, will report back.
EDIT: Confirming the site works just fine now, even with www upfront.
---------- Post added at 03:56 AM ---------- Previous post was at 03:49 AM ----------
Everything works lagfree, I am downloading Google Maps to try out now cause users have reported bugs with it in 4.2 builds around here, so I'm gonna test that too.
EDIT2:N̶o̶ ̶b̶u̶g̶s̶ ̶o̶n̶ ̶G̶o̶o̶g̶l̶e̶ ̶M̶a̶p̶s̶ ̶e̶i̶t̶h̶e̶r̶.̶Perfectly smooth, although I'd change the launcher afterwards, but that's a personal preference.
EDIT3: Spoke too soon, the whole map twitches up and down when I'm moving on the map.It doesn't really matter for me as I don't use Google Maps but CoPilot, and that is working perfectly.It was reported on CM's bugtracker on how to fix it, but I just can't find the report on there now.Maybe tomorrow, it's already 4AM here.Thanks for yet another great ROM!
Click to expand...
Click to collapse
I'll look for it. Seems like it's device specific. Thanks for the report. I'll have our bugtracker email up shortly with a link in the OP. Doing it via an email system so there won't be a need to learn a new website to report bugs.
synergye said:
I'll look for it. Seems like it's device specific. Thanks for the report. I'll have our bugtracker email up shortly with a link in the OP. Doing it via an email system so there won't be a need to learn a new website to report bugs.
Click to expand...
Click to collapse
Actually it's happening on my S3 too, with the new version, the 6.x versions work just fine though.It's probably google's fault.
For some strange reason my home button doesnt respond at all on this rom
Edit: After changing recovery and wiping all again then flashing everything works sorry about that
when you reboot the device Google play store and Google search unfortunately stop working
plz help
just out of curiosity, how come this rom is odexed? i dont remember seing it in custom roms yet
Why is odexed ?
t0mas_ said:
just out of curiosity, how come this rom is odexed? i dont remember seing it in custom roms yet
Click to expand...
Click to collapse
We have theme chooser support, so I don't see a reason to disable dex pre-optimization. Is there a reason we should that I've missed? We have our own build variant that we set dex preoptimization in which is "codefirex" that we set defaults in. Just like userdebug or debug.
Re: Google app FC, could you describe how you're flashing the device, and what gapps package you're using? Is this a clean or dirty flash?
Edit: Dex preopt is there for performance reasons. Google didn't add dex preopt to slow the system down or make it harder to mod ,
synergye said:
We have theme chooser support, so I don't see a reason to disable dex pre-optimization. Is there a reason we should that I've missed? We have our own build variant that we set dex preoptimization in which is "codefirex" that we set defaults in. Just like userdebug or debug.
Re: Google app FC, could you describe how you're flashing the device, and what gapps package you're using? Is this a clean or dirty flash?
Click to expand...
Click to collapse
Will be possible to get this rom official on mytouch4G if i send ready to build device tree to gerrit or what you have ?
Sent from my myTouch 4G using xda premium
tweaks and features
So is it a ROM wihout any tweaks and extra features?
No "kill app with backwards key" or any other handy features?
No O/C features at all?
synergye said:
We have theme chooser support, so I don't see a reason to disable dex pre-optimization. Is there a reason we should that I've missed? We have our own build variant that we set dex preoptimization in which is "codefirex" that we set defaults in. Just like userdebug or debug.
Re: Google app FC, could you describe how you're flashing the device, and what gapps package you're using? Is this a clean or dirty flash?
Edit: Dex preopt is there for performance reasons. Google didn't add dex preopt to slow the system down or make it harder to mod ,
Click to expand...
Click to collapse
thank you for explanation, as i said i was just curious
i had in mind that it is a bit faster but harder to mod this way, but that kind of doesnt matter if you build from source. actually, now that i think about it from what i know, it shouldnt be harder to mod on sense either. e bit more tedious maybe... but im sure you know what you are doing
bestfil said:
So is it a ROM wihout any tweaks and extra features?
No "kill app with backwards key" or any other handy features?
No O/C features at all?
Click to expand...
Click to collapse
I would imagine it has those features, as CFX almost always has. On the description page it says it gives the user the ability to change to a vanilla AOSP experience with one setting, most likely CFX settings toggle. I may be wrong, as I've not been able to flash it quite yet.
Sent from my Inspire 4G w/CM10.1
WordsworthESP said:
I would imagine it has those features, as CFX almost always has. On the description page it says it gives the user the ability to change to a vanilla AOSP experience with one setting, most likely CFX settings toggle. I may be wrong, as I've not been able to flash it quite yet.
Sent from my Inspire 4G w/CM10.1
Click to expand...
Click to collapse
I had to remove that...we don't have that merged in *quite* yet. This is a total project reboot...we did this for a number of reasons (one of which is performance). We're merging in settings quickly, but it is very minimal for now.
Oh ok, thanks. I am curious though, did you ditch the OpenMaster project, or were issues device specific? I'd always wondered if it was just the Ace that had OpenMaster issues.
Sent from my Inspire 4G w/CM10.1
with the nightly i cant add lockscreen shortcuts to the rings

[MOD] [Xposed] Chromecast SystemUI Crash Fix

As many of you will be aware, Samsung and more specifically for our needs, LG, devices have a strange SystemUI Crash when casting from certain apps (mainly the Google ones).
Why does this occur?
Well it is because LG and Samsung modify their status bar to include volume sliders, even if you disable the sliders the code still exists and this clashes with the way casting apps operate.
So for the fix, I asked my good friend @HomerSp to take a look at this error for me, now he doesn't have an LG G3 and this didn't benefit him at all, but he did it to help me, and for the fun of it, so all thanks should be directed to him.
He has built us an xposed module that stops the crash, as far as my testing has gone it seems to be working fine now.
The APK is attached.
Homer tells me he doesn't have paypal at the moment so don't worry about donating, if you really feel compelled to then please donate to charity, or give it to me and I will ensure that it ends up with either Homersp or a charity.
Are you a samsung user that found this page?
This module might fix your errors too, its worth a try it can't cause any harm as you can simply deactivate it if it doesn't work, or gives you different errors.
I can confirm this works ☺
Thanks
It works for Google music and movies but I can't use YouTube
Gesendet von meinem LG-D802 mit Tapatalk
Ahlbrink said:
It works for Google music and movies but I can't use YouTube
Gesendet von meinem LG-D802 mit Tapatalk
Click to expand...
Click to collapse
This fix worked for me running g3 ROM on my g2. Even on YouTube
Brilliant! It works on for Google Play Music.
After a few reboots it works for me too. YouTube was very lazy. Now it's okay
Gesendet von meinem LG-D802 mit Tapatalk
116
Yep, confirmed working for Youtube and Play Music. Kudos to the dev.
Hey guys, I just uploaded the source code to Github in case anyone wants to have a look at how I fixed this bug: https://github.com/HomerSp/XposedCastFix.
EDIT: I also added some information about why this bug occurs, in hopes that either Samsung and LG, or Google (yes, it's as much their problem as it is the manufacturers) fix this problem.
A lot of us are noticing the ATT and Sprint variant of the phone does not come with the brightness or volume slider in notifications. Can you shed some light as to how those of us who don't use cast can add the sliders back?
Any chance to get that working for the Samsung Note 10.1 2014?
Same issues with the installed apk as without it.
Zod09999 said:
Any chance to get that working for the Samsung Note 10.1 2014?
Same issues with the installed apk as without it.
Click to expand...
Click to collapse
Whilst the crash on the Samsung is caused by the same problem (existence of the volume sliders) the exact crash might be different as Samsungs code will differ from LG's.
We would need to see a logcat of the Samsung crash in order to know what needs patching.
Zod09999 said:
Any chance to get that working for the Samsung Note 10.1 2014?
Same issues with the installed apk as without it.
Click to expand...
Click to collapse
As lenny said, I will need a logcat to check what needs fixing. It might be that more methods in AudioManager need patching.
HomerSp said:
As lenny said, I will need a logcat to check what needs fixing. It might be that more methods in AudioManager need patching.
Click to expand...
Click to collapse
I sent you a PM with a logcat. Wasn't sure how much personal data would be in it, so didn't want to post it publicly.
Works on G Flex to? i have the same problem
HomerSp said:
As lenny said, I will need a logcat to check what needs fixing. It might be that more methods in AudioManager need patching.
Click to expand...
Click to collapse
For your information, Xposedcastfix worked smoothly (screen mirroring) on Note 10.1 2014 LTE (P605) after installation (but without audio playing Asphalt7)). It stopped working after first disconnect. System UI has been crashing ever since. Worked with audio on second try after deactivating module/reactivating/reboot, but not on third and fourth tries.
I only have problem with 'Screen mirroring' but not chromecasting you tube etc.
Thanks
florinro said:
Works on G Flex to? i have the same problem
Click to expand...
Click to collapse
Should work on the G Flex too, but as I don't actually have any of these devices I can't be sure. If you do get a problem make sure to send me a logcat so I can try and fix it.
shayind4 said:
For your information, Xposedcastfix worked smoothly (screen mirroring) on Note 10.1 2014 LTE (P605) after installation (but without audio playing Asphalt7)). It stopped working after first disconnect. System UI has been crashing ever since. Worked with audio on second try after deactivating module/reactivating/reboot, but not on third and fourth tries.
I only have problem with 'Screen mirroring' but not chromecasting you tube etc.
Thanks
Click to expand...
Click to collapse
Does SystemUI crash or hang (Force Close vs App Not Responding)? @Zod09999 has the same device (a Note 10.1 variant) and SystemUI hangs there. We are working on a fix for that.
HomerSp said:
Should work on the G Flex too, but as I don't actually have any of these devices I can't be sure. If you do get a problem make sure to send me a logcat so I can try and fix it.
Does SystemUI crash or hang (Force Close vs App Not Responding)? @Zod09999 has the same device (a Note 10.1 variant) and SystemUI hangs there. We are working on a fix for that.
Click to expand...
Click to collapse
App stops responding requiring reboot.
shayind4 said:
App stops responding requiring reboot.
Click to expand...
Click to collapse
Could you get me a log of that happening? I want to check if you and @Zod09999 have the same problem (which seems likely).
HomerSp said:
Could you get me a log of that happening? I want to check if you and @Zod09999 have the same problem (which seems likely).
Click to expand...
Click to collapse
Sorry. I'm not due back home till Friday evening.
HomerSp said:
Should work on the G Flex too, but as I don't actually have any of these devices I can't be sure. If you do get a problem make sure to send me a logcat so I can try and fix it.
Does SystemUI crash or hang (Force Close vs App Not Responding)? @Zod09999 has the same device (a Note 10.1 variant) and SystemUI hangs there. We are working on a fix for that.
Click to expand...
Click to collapse
It works, i root my phone today and just installed your fix. Thanks

5.1 Update

Rollin out now. New version LMY47D
Sent from my Nexus 7 using XDA Free mobile app
Test The Play Store Sling TV App
TTgowings said:
Rollin out now. New version LMY47D
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
Test the player store version of the Sling TV app, I have been told it will
work with the 5.1 Nexus TV Player version ... You don't need a login account, if doesn't tell you to upgrade, when you first open the app, then it will work ...
---------- Post added at 11:46 PM ---------- Previous post was at 11:34 PM ----------
Test this current version of the Sling TV app, it has leanback launcher Code http://www.mediafire.com/download/qvnxs618mihpfj6/com.sling-1.apk ... Let me know ASAP, if it doesn't ask you for the update/upgrade, when you launch the app ...
No sir, does not seem to work, I get a 2-49 error, I went in and stopped the app and cleared cached, also ran from sideload launcher didnt make a difference. TT>
TTgowings said:
No sir, does not seem to work, I get a 2-49 error, I went in and stopped the app and cleared cached, also ran from sideload launcher didnt make a difference. TT>
Click to expand...
Click to collapse
Ok, thanks ...
I wonder if Sling is Blocking it now ? http://www.cordcuttersnews.com/sling-tv-updated-now-blocks-android-tvkodi-boxes-like-the-g-box-q/
Any new features???
I'm not noticing anything. I need to test android cast though the main feature that I felt stunk and always forced me to use my chromecast.
Where is this? Via update? The image hasn't even been posted yet...i hope to god they addressed the multichannel audio pass through for ac3 and DTS, not to mention add mpeg2 hardware decoding
my nexus player auto updated itself. Haven't used it all day and when I just checked it 5.1 was already installed. Android phones/tablets usually require the user to approve, but it looks like android TV will auto update. Perhaps a notification is shown and after awhile if the user doesn't do anything, it auto updates?
Doesn't look like a lot is changed, from a user POV. One thing I did notice is a "restart" option in settings->about, which is nice. No more unplugging and plugging to reboot!
TTgowings said:
Rollin out now. New version LMY47D
Sent from my Nexus 7 using XDA Free mobile app
Click to expand...
Click to collapse
aborrelli said:
I'm not noticing anything. I need to test android cast though the main feature that I felt stunk and always forced me to use my chromecast.
Click to expand...
Click to collapse
McChen147 said:
my nexus player auto updated itself. Haven't used it all day and when I just checked it 5.1 was already installed. Android phones/tablets usually require the user to approve, but it looks like android TV will auto update. Perhaps a notification is shown and after awhile if the user doesn't do anything, it auto updates?
Doesn't look like a lot is changed, from a user POV. One thing I did notice is a "restart" option in settings->about, which is nice. No more unplugging and plugging to reboot!
Click to expand...
Click to collapse
Google still hasn't posted factory images for 5.1. Can any of you dump the system, boot and recovery??
5.1 factory image is up now
Is the Nexus Player more responsive with 5.1?
dabotsonline said:
Is the Nexus Player more responsive with 5.1?
Click to expand...
Click to collapse
So far, it seems like it doesn't crash as much (only have been using it for about an hour0. I am still having issues casting tabs from my laptop. Also gave Amazon Instant another try without any success.
McChen147 said:
my nexus player auto updated itself. Haven't used it all day and when I just checked it 5.1 was already installed. Android phones/tablets usually require the user to approve, but it looks like android TV will auto update. Perhaps a notification is shown and after awhile if the user doesn't do anything, it auto updates?
Doesn't look like a lot is changed, from a user POV. One thing I did notice is a "restart" option in settings->about, which is nice. No more unplugging and plugging to reboot!
Click to expand...
Click to collapse
I've noticed the same thing happens with the apps. They are just magically updated. No questions or manual intervention needed.
I have not gotten it. maybe it's cause im rooted?
I am still waiting for update. I am not rooted.
FreemanAMG said:
I've noticed the same thing happens with the apps. They are just magically updated. No questions or manual intervention needed.
Click to expand...
Click to collapse
That's because playstore is set to auto update apps by default. If you don't want that behaviour, change the setting.
Note 4 ?
---------- Post added at 08:17 PM ---------- Previous post was at 08:12 PM ----------
Question for those on 5.1.
Does the bluetooth audio function now? Can you pair bt headset, or bluetooth stereo to it?
Note 4 ?
Anybody known if the root out there is ok for the new 5.1 update or is there a new file posted somewhere?
I believe the existing root still works as there wasn't a new one for my phone Nexus 6 when it went from 5.0.1 to 5.1
Perfect will give it a shot. Stuck into a minor issue in the meantime. Cant mount the cache arghhh. Factory image does not include a cache.img partition. Can I use the cache.img from another nexus device?

Categories

Resources