Database Info

[KERNEL] Dual Boot 1.3 - 22/09/2011

Android's First multi version, fully working Dual Boot​
Dual boot is running 2 ROMs on phone. You can run Froyo and Gingerbread and switch between ROMs by restarting phone. All ROMS are supported in dual boot including froyo, cm7 and cm 6.2.
*** Flash 800Mhz first. I will upload 1020 and 1300Mhz versions later.
*** Partiting sdcard in cwm does not wipe data in sdcard.
*** Consider worst case and backup important sdcard data.
*** You can have your existing rom on phone as ROM1 if it is rfs, ext2 or ext4.
*** Dual boot enables data2sd for both roms.
*** ROM1 boots by default and to boot ROM2 press Home Button.
*** Press the ROM selection button between 5-20 seconds after turning on phone.
*** Here is the partitions used in dual boot.
Internal /system - ROM1 system
Internal /data - ROM2 system
sdcard ext1 - ROM1 data
sdcard ext2 - ROM2 data
sdcard swap - swap for both ROMS
Instructions to Flash dual boot kernel.
1. Download Dual Boot Kernel and update.zip files. Links are at the end of this post.
2. Upload update.zip files to sdcard.
3. Flash Dual Boot Kernel using odin one package selection and wait until Phone boots into Recovery.
5. Partition SDCARD in recovery.
- Select 'Mounts and Storage' and format data and cache and mount cache
- Go to 'Advanced' and 'Parition SD card'
- Select sdcard /data partition size you wish to have. Two data2sd partitions will be created with size you choose.
- Select swap size if you want swap on sdcard
- Wait until partitioning Done
- Go to main menu in recovery
6. Flash ROM1 or Use existing rom.
- If you want to use existing rom just reboot system now else continue.
- Go to main menu in recovery
- Select 'Mounts and Storage' and Format system and mount system
- Select 'Install zip from sdcard' and 'choose zip from sdcard'
- Select the ROM1 zip file and Press Yes to Install
- Reboot system now
Wait untill ROM1 boots
7. Flash ROM2
- Reboot to recovery mode and press Home key (ROM2) with in 5-20 seconds.
- Select 'Mounts and Storage' and format system, data and mount system
- Select 'Install zip from sdcard' and 'choose zip from sdcard'
- Select the ROM2 zip file and Press Yes to Install
- Reboot system now
Press Home key within 15 seconds and ROM2 will boot
Click to expand...
Click to collapse
Download Kernel and update.zip files:
Kernel 1.3 - 800Mhz : http://www.megaupload.com/?d=XSIAT910
Kernel 1.3 - 1000Mhz : http://www.megaupload.com/?d=EUBW0N2G
Kernel 1.3 - 1200Mhz : http://www.megaupload.com/?d=D93CH76X
Kernel 1.2 - 800Mhz : http://www.megaupload.com/?d=R22DCDOG
cm7 alpha4 : http://www.megaupload.com/?d=287BAP4D
cm6.2 alpha4 : http://www.megaupload.com/?d=LL3JXTP8
sumee 4.0 : http://www.megaupload.com/?d=DO01QB84
xxjps : http://www.megaupload.com/?d=68XJN4I1
Kyrillos7 : http://www.megaupload.com/?d=2VXAIL11
indroid5 : http://www.megaupload.com/?d=5DN5R2XF
Click to expand...
Click to collapse
How to Make update.zip
1. Download attached create_update.zip.zip file and unzip
2. Move to unzipped folder and copy your rom files to system folder
3. Open create_update.zip.bat and wait untill "Press any key" appears
4. Done. update.zip is ready. rename or upload as it is to sdcard
Click to expand...
Click to collapse
Source Code : Still in Alpha stage. Source will be out with final Release.
******* Enjoy Dual Boot *******

Excellent Work apollo5801...Waiting For it...

Great to know... Do your best!

Best of luck..
Apollo you should have reserved some posts
Tapatalked from my super smooth, ultra fast samsung galaxy s2.

Great news! Cyanogenmod, here I come -->
Sent from my speedy G3!

Great work apollo5801!! Looking forward to test it

That's plain awesome
Great News!

That day is not far when g3 vil become a space craft.. Lolzz.. Great wrk apollo5801
Sent from my GT-I5800 using XDA App

great news

wow.....great news !
what's the another system?

dxdiag32 said:
wow.....great news !
what's the another system?
Click to expand...
Click to collapse
Windws 8

shebu18 said:
Windws 8
Click to expand...
Click to collapse
no its cm7 n froyo for now..

dxdiag32 said:
wow.....great news !
what's the another system?
Click to expand...
Click to collapse
Both are Android OS.
You get to boot two different ROMs. Got it?

rudolf895 said:
no its cm7 n froyo for now..
Click to expand...
Click to collapse
you mean cm7 is working for sg3 now?

dxdiag32 said:
you mean cm7 is working for sg3 now?
Click to expand...
Click to collapse
D'uh!!!!
What has been Marcellusbe working his ass of for??

think bout it.... MIUI and CM7 with dual boot NICE!
This just might be the best thing ever happened to G3

Anyways great work by apolo. This can be counted as epic developement alongwith cm7 port. Hope sumday we can dual boot wp7 and cm7 together.
Sent from my GT-I5800 using XDA App

Nice work. Thanq. I clicked thanks.I wud like to thank a million times.
And We do not want this valuable thread to b polluted with unwanted posts. Ofcourse even mine is an unwanted post

brjshshrma said:
No need to hit thanx as i didnt help u in anyway. I just edited in respect of a gud developer.
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
Thanks for editing the post. So seem reasonable n good person.

brjshshrma said:
No need to hit thanx as i didnt help u in anyway. I just edited in respect of a gud developer.
Sent from my GT-I5800 using XDA App
Click to expand...
Click to collapse
LOL man...he can still see the post...Rudolf quoted it

[Q] How remove gapps CM10

Hello, i have flash my P5110 with gapps for JB and my current ROM is sybwar 1.0,i try a full wipe(data/cach/dalvik) and flash ROM sybwar but gapps is always present.

giims said:
Hello, i have flash my P5110 with gapps for JB and my current ROM is sybwar 1.0,i try a full wipe(data/cach/dalvik) and flash ROM sybwar but gapps is always present.
Click to expand...
Click to collapse
Nobody ? Sorry for my english...

Please link me to this ROM.
It sounds like:
1. The ROM doesn't wipe /system on flash.
-or-
2. It has Gapps included.
Format /system in CWM, and then reflash the ROM. If gapps are still there, they're part of the rom If the gapps are gone, congratulations.
Also, why not use the official CM10? It's great!

frankdrey said:
Please link me to this ROM.
It sounds like:
1. The ROM doesn't wipe /system on flash.
-or-
2. It has Gapps included.
Format /system in CWM, and then reflash the ROM. If gapps are still there, they're part of the rom If the gapps are gone, congratulations.
Also, why not use the official CM10? It's great!
Click to expand...
Click to collapse
Thank you , the ROM: http://forum.xda-developers.com/showthread.php?t=1793111
Gapps not included. How flash the /system in CWM?
Édit: i mount and format /system and flash but always here. Thé boot is verry long (5-10 min) , i have not the mettali kernel installed and It lacks a lot of application of this ROM, it's like his Since the first installation of gapps in this ROM.

giims said:
Thank you , the ROM: http://forum.xda-developers.com/showthread.php?t=1793111
Gapps not included. How flash the /system in CWM?
Édit: i mount and format /system and flash but always here. Thé boot is verry long (5-10 min) , i have not the mettali kernel installed and It lacks a lot of application of this ROM, it's like his Since the first installation of gapps in this ROM.
Click to expand...
Click to collapse
1. Gapps are included with the ROM.
2. This is not a CM10 ROM, it is really based on CM9
I suggest you install the REAL CM10: http://get.cm/?device=p5110
Download the zip at the top, and flash it from CWM. Then wipe data. You will need to wipe data since you will be going from CM9 to CM10.

Why i can't use any OC kernel on CM10.2

Everything is in the title Please help. I cleaning ALL and i flash CM 10.2 (by sakinda) and (after) OC kernel (Jarvis, Pandora, Aries). I see only black screen (but making files on the SD-DATA partition)
BTW: I have SD-DATA and CACHE.

I can't use any OC kernel
Maybe i have to install ROM and after first boot install kernel?

This post has been deleted.

try this:
1.Wipe everything in recovery except sdcard
2. Flash Rom
3. Flash gapps
4.Flash kernel (Aries 3.5 oc is recommended)
5. Reboot

Affangta said:
try this:
1.Wipe everything in recovery except sdcard
2. Flash Rom
3. Flash gapps
4.Flash kernel (Aries 3.5 oc is recommended)
5. Reboot
Click to expand...
Click to collapse
OK i fixed it (sorry for asking )
1.Wipe everything in recovery except sdcard
2. Flash Rom
3. Flash gapps
4. Reboot
5.Flash kernel (Aries 3.5 oc is recommended)
6. Reboot
Now working with you method. I don't have idea why this didn't work

michal16 said:
OK i fixed it (sorry for asking )
1.Wipe everything in recovery except sdcard
2. Flash Rom
3. Flash gapps
4. Reboot
5.Flash kernel (Aries 3.5 oc is recommended)
6. Reboot
Now working with you method. I don't have idea why this didn't work
Click to expand...
Click to collapse
I had problems with jarvis kernel too..it doesn't boot the phone at stock frequencies..aries kernel does, that's why aries works for everyone.

Affangta said:
I had problems with jarvis kernel too..it doesn't boot the phone at stock frequencies..aries kernel does, that's why aries works for everyone.
Click to expand...
Click to collapse
The jarvis boot but is very unstable (when i tired change frequency i see only reboot). Maybe jarvis have default @900MHz?
Help ho run minicm9 and Aries 3.5? I stuck on bootanimation.

[Q] help with custom ROM installation process of CM7 a9

I would like to install CM7 alpha9 MTD from this thread http://forum.xda-developers.com/showthread.php?t=2309390
The process I imagine is as following:
- backup things (I'm not sure how exactly this part works, if you know how to backup application data please help)
- flash the https://cm7-i5800.googlecode.com/files/CM7_Kernel_MTD_OC1Ghz.tar kernel with ODIN without repartitioning (as PDA I'm guessing, unless there's an option for "kernel" in which case it's kernel, which one is it? )
- boot to recovery
- format /system, /data, /preload
- install the ZIP of the ROM: https://cm7-i5800.googlecode.com/files/CM7.2.0-GT-I5800_Alpha9_MTD_CWM.zip
- install the ZIP of the google apps for 2.3.7: http://www.devfiles.co/download/wBDwQIzb/gapps-gb-20110828-newtalk-signed.zip
- install SuperSU ? is this necessary with CM? Although I have doubts, as it was never mentioned unlike for Omni, so I guess not for this one
- reboot phone
- enjoy CM7
So basically I'm asking, am I missing out on anything basic but important that would result in bricking? And
- how to backup application data to be retrieved after flashing
- is the kernel a "PDA" or is there another thingy for it in Odin that needs be done?
- do you need to install any previous versions of CM7 for this MTD thing to work?
- does the kernel provide a recovery with which this ROM can be installed?
If you managed to get to the end, thank you - And thanks in advance for the help

Installing a rom
Zhuinden said:
I would like to install CM7 alpha9 MTD from this thread http://forum.xda-developers.com/showthread.php?t=2309390
The process I imagine is as following:
- backup things (I'm not sure how exactly this part works, if you know how to backup application data please help)
- flash the https://cm7-i5800.googlecode.com/files/CM7_Kernel_MTD_OC1Ghz.tar kernel with ODIN without repartitioning (as PDA I'm guessing, unless there's an option for "kernel" in which case it's kernel, which one is it? )
- boot to recovery
- format /system, /data, /preload
- install the ZIP of the ROM: https://cm7-i5800.googlecode.com/files/CM7.2.0-GT-I5800_Alpha9_MTD_CWM.zip
- install the ZIP of the google apps for 2.3.7: http://www.devfiles.co/download/wBDwQIzb/gapps-gb-20110828-newtalk-signed.zip
- install SuperSU ? is this necessary with CM? Although I have doubts, as it was never mentioned unlike for Omni, so I guess not for this one
- reboot phone
- enjoy CM7
So basically I'm asking, am I missing out on anything basic but important that would result in bricking? And
- how to backup application data to be retrieved after flashing
- is the kernel a "PDA" or is there another thingy for it in Odin that needs be done?
- do you need to install any previous versions of CM7 for this MTD thing to work?
- does the kernel provide a recovery with which this ROM can be installed?
If you managed to get to the end, thank you - And thanks in advance for the help
Click to expand...
Click to collapse
Reboot to recovery, make a backup (you'll find in the menu)
Make a full wipe(in recovery)
- install the ZIP of the ROM: https://cm7-i5800.googlecode.com/files/CM7.2.0-GT-I5800_Alpha9_MTD_CWM.zip
- install the ZIP of the google apps for 2.3.7: http://www.devfiles.co/download/wBDwQIzb/gapps-gb-20110828-newtalk-signed.zip
- flash the https://cm7-i5800.googlecode.com/files/CM7_Kernel_MTD_OC1Ghz.tar
Install all these 3 zip with One Package ticked
Reboot and enjoy
Good luck

to install CM7 alpha 9 MTD you first need to be running CM7 alpha 9, which you flash with ODIN http://forum.xda-developers.com/showpost.php?p=14240212&postcount=1
then follow the instructions in the previous reply from sakenas to update to CM7 alpha 9 MTD using clockwork mod recovery.
only flash the 1ghz kernel after you have updated to CM7 alpha9 MTD.
you flash the kernel with ODIN using the one package method, exactly the same way you will have flashed CM7 alpha 9.

[Q] Custom Rom for Galaxy ACE 3 GT-S7272

There is no Custom Rom for the Galaxy ACE 3 Duos GT-S7272. So, kindly develop or provide Custom Rom for GT-S7272. Thanks

We have a cyanogenmod11 for this device
nicebunny said:
There is no Custom Rom for the Galaxy ACE 3 Duos GT-S7272. So, kindly develop or provide Custom Rom for GT-S7272. Thanks
Click to expand...
Click to collapse
Here is the link for cm11 https://yadi.sk/d/LFvTYxc0esWHJ
And here is the link for cwm 6.0.5.1 gt-s7272 https://yadi.sk/d/iWzthzvzerDqw
For Gapps http://d-h.st/users/TKruzze
just do this start with cwm 6.0.3.1 and follow these steps :
1- wipe data / factory reset
2- install zip from sd card
3- choose zip from sdcard
4- CWM Recovery 7272 6.0.5.1 Final.zip
5- advanced --> reboot recovery
6- mount and storage -- >format /cache --> format /data --> format /boot --> format /data and /data/media (/sdcard) --> Go back
7- install zip --> choose zip from /storage/sdcard1 --> choose CM11.zip
8- reboot system now
9- go again to recovery and flash gapps
THANKS TO ZIM555

Thanks very much Dear.
Please elaborate the process as I am new to install Custom ROM for the GT-S7272. Also describe that the Custom ROM is Kit Kat or LolliPop.
Now Downloading the software from the given links. Therefore, please guide me to install custom rom on GT-S7272.
Thanks once again.

BlackAndroid007 said:
Here is the link for cm11 https://yadi.sk/d/LFvTYxc0esWHJ
And here is the link for cwm 6.0.5.1 gt-s7272 https://yadi.sk/d/iWzthzvzerDqw
For Gapps http://d-h.st/users/TKruzze
just do this start with cwm 6.0.3.1 and follow these steps :
1- wipe data / factory reset
2- install zip from sd card
3- choose zip from sdcard
4- CWM Recovery 7272 6.0.5.1 Final.zip
5- advanced --> reboot recovery
6- mount and storage -- >format /cache --> format /data --> format /boot --> format /data and /data/media (/sdcard) --> Go back
7- install zip --> choose zip from /storage/sdcard1 --> choose CM11.zip
8- reboot system now
9- go again to recovery and flash gapps
THANKS TO ZIM555
Click to expand...
Click to collapse
Does this works?

lancejuson said:
Does this works?
Click to expand...
Click to collapse
100% work for gt-s7272 trust me i've try it and it is working fine

it's Not Working [Be Careful]
(
BlackAndroid007 said:
100% work for gt-s7272 trust me i've try it and it is working fine
Click to expand...
Click to collapse
when start installing update in cwm recovery not complete just stay say installing updates

ahmadalmoslli said:
when start installing update in cwm recovery not complete just stay say installing updates
Click to expand...
Click to collapse
Are you sure because i've try ans it works for me did you follow me step by step ?

Thanks you
i have followed the Rom developer on his Russian forum and get the latest version of Rom
it's working great
thanks you again for your share

@BlackAndroid007: hi. Im new about flashing roms. Can you please help me? I have ace 3 duos (7272)

Is cm11 100% stable on s7272? What are those bug on it? Thanks

Status 7 error and "assert"
Can you Help me ?
Device - Samsung galaxy ace 3 gt-s7272
Rom- CM11 - from a link in this forum which is told to support the given Device
Recovery- CWM 6.0.3.1
Problem- Shows status 7 error while flashing and bricks the Device. (since installation is interrupted)
Note - There is no code beginning with "assert" in updater-script file.
Question - How can I install CM11 or is there a good alternative supported Rom - which allow system wide themes. ?

MSV O said:
Can you Help me ?
Device - Samsung galaxy ace 3 gt-s7272
Rom- CM11 - from a link in this forum which is told to support the given Device
Recovery- CWM 6.0.3.1
Problem- Shows status 7 error while flashing and bricks the Device. (since installation is interrupted)
Note - There is no code beginning with "assert" in updater-script file.
Question - How can I install CM11 or is there a good alternative supported Rom - which allow system wide themes. ?
Click to expand...
Click to collapse
U need 6.0.5.1 cwm. Flash it then go to advance and then reboot to recovery mode. Then format data then go to advance mount and storage and click format data/ data/ media blah blah. Den flash the cm11 and the gapps. And oh by the way the flashing of cm11 is kinda long to install b patient. Once u done install the gapps and ur done

jusipism said:
U need 6.0.5.1 cwm. Flash it then go to advance and then reboot to recovery mode. Then format data then go to advance mount and storage and click format data/ data/ media blah blah. Den flash the cm11 and the gapps. And oh by the way the flashing of cm11 is kinda long to install b patient. Once u done install the gapps and ur done
Click to expand...
Click to collapse
Done.
Send via CyanogenMod 11

Next prob -
ROM - cm11
Model - Samsung galaxy ace gt-s7272
Problem - Bluetooth is not turning on after flashing cm
Note - a repair app said Bluetooth settings folder not found
Question - how to regain Bluetooth.
Problem Priority - not too important if you are busy
Sent from my GT-S7270 using XDA Free mobile app

jusipism said:
@BlackAndroid007: hi. Im new about flashing roms. Can you please help me? I have ace 3 duos (7272)
Click to expand...
Click to collapse
yes if u have some problems follow my video https://www.youtube.com/watch?v=0EPRwEbFh7w
cm11 is not 100% stable for gt-s7272

rom
hello.
I have a question.
there is for this device(Ace 3 .GT-S7272) also custom rom in this link:
http://forum.xda-developers.com/android/development/rom-port-cyanogenmod-11-samsung-galaxy-t2938825
Are these two different ROM's?
because this rom (http://forum.xda-developers.com/android/development/rom-port-cyanogenmod-11-samsung-galaxy-t2938825
)
not working.
is your rom Healthy? is your rom working?
i am waiting for your answer.
thanks.

Its all working. Maybe you dont have the cwm that fits to it.
Sent from my GT-S7272 using XDA Free mobile app

jusipism said:
@BlackAndroid007: hi. Im new about flashing roms. Can you please help me? I have ace 3 duos (7272)
Click to expand...
Click to collapse
Of course send me a message and i will let u a link for the video i've made

100% work for gt-s7272
BlackAndroid007 said:
100% work for gt-s7272 trust me i've try it and it is working fine
Click to expand...
Click to collapse
100% work for gt-s7272
but i have a prooblem how can i install gaap GApps Packages ??

tainy007 said:
100% work for gt-s7272
but i have a prooblem how can i install gaap GApps Packages ??
Click to expand...
Click to collapse
Intall it using recovery download your gapps after that go to your recovery and flash it with doin this : install zip --> chose zip --> and chose your gapps zip file that's all