How to take nandroid backup - Micromax Canvas 2 Plus A110Q

HOW TO TAKE NANDROID BACKUP​
1)First of all root your device- V1& V2
2)Then download install custom recovery of your device.WE Having Two Types Of Recovery-
HERE IS GUIDE FOR INSTALLING CUSTOM RECOVERY--
ClockWorkMod v5.5.0.4 Recovery-
http://forum.xda-developers.com/mic...overy-clockworkmod-v5-5-0-4-recovery-t2327786
Philz Touch Recovery-
http://forum.xda-developers.com/micromax-canvas-2/development/cwm-philz-touch-recovery-t2364465
3)Reboot into Recovery AND navigate using volume buttons and power buttons If You Installed CWM Or Via Touch If Touch one for selceting.In the menu select Backup.
4)Then it will automatically start creating backup into sd card(Make Sure You Have Enough Space Free & it will take some time).
5)After Finish Reboot your Device And Go check For Clockworkmode Folder Into Sd Card.Thats Your Nandroid Backup.
6)you can restore this backup via recovery anytime if your rom corrupts.
​
CREDITS-
ALL THE OP OF LINK MENTIONED ENJOY THE CREDIT.

touch is not working in phillz touch recovery any particulars options I should check

BHATT said:
touch is not working in phillz touch recovery any particulars options I should check
Click to expand...
Click to collapse
No touch isnt working in philz recovery. I recommend u to use cwm recovery. Its stable (maybe perfect).

Related

[RECOVERY] TWRP Recovery 2.3.2.3

Experimental and under development, certain functions may cause damage up to and including data loss and bricking!
Features:
Full touch UI
Working mounts for system, data, cache, external sd
AROMA compatible
4.2 Jellybean Compatible
Changelog:
Fixed mounts, access to external SD for backup/restore and flashing.
Updated to 2.3.2.3. Automounts external SD, built against JB Source, curtain animation removed, 4.2 compatible.
Installation Instructions:
This assumes you still have your drivers from when you rooted, and you have an unlocked bootloader. If not, go unlock it.
Download the recovery image someplace useful, like where you have fastboot installed, or c:\twrp
Reboot into download mode (fastboot mode) by powering on holding volume down, then selecting the usb icon with volume down then power to select.
On the PC, type fastboot flash recovery twrp-thrive.img
Once it's done (should be like 3 seconds) type fastboot reboot then hold down volume down again, this time selecting recovery
Enjoy TWRP recovery!
Alternate Installation:
Flash the TWRP flashable zip in CWM same as you would flash any ROM/Kernel.
Uses the Balthesaur Kernel
Downloads:
TWRP 2.3.2.3 Fastboot Flash image
Flashable Files:
TWRP 2.3.2.3 Recovery flashable zip - Flash in recovery same as any other ROM/kernel
CWM Recovery flashable zip (thanks to dalepl) - Returns you to CWM Touch Recovery, flash in recovery same as any other ROM/kernel

[Q] CWM Recovery - Install CWM Backup from Zip?

(Unlocked and rooted Moto G with Mokee ROM)
I've read the similar threads and I'm still unsure, so hopefully someone here can clarify this for me.
I want to free up some space. Can I zip up a CWM Recovery directory, like so: 2014-03-29-18.54.23-google.zip
and then if required: boot into CWM Recovery > Install from zip ....
i.e. would that be the same as ... boot into CWM Recovery > Backup & Restore > Restore from SDCard ....?
If so then that would save me about ar400 MB (just for my stock ROM backup).
Also, can CWM recovery install from .7z as well as .zip?
Any and all help much appreciated.
C.
EDIT: To be more specific I mean:
1) adb pull the CWM backup from the moto g
2) zip it in Win7
3) adb push it back to the moto g
4) then use "install from zip"
Anyone?
C.
No thats not possible ich think. Just activate compression while creating the backup.
You need twrp or PhilZ advenced CWM for it
Sent from my loved HTC One S using (most time buggy) Tapatalk
Oh, okay. Thanks for the info. I'll look into PhilZ CWM.
Cheers,
C.

Xolo Q3000 - recovery collection

XOLO Q3000 RECOVERY COLLECTION​
Hiii All XOLO Q3000 users,
I bring to you collection of recoveries for our beloved XOLO Q3000.
STOCK RECOVERY​
Jelly Bean
JB 4.2.1 S003
JB 4.2.1 S011
KitKat
Kitkat 4.4.2 S007 version
======================================================================================================
CUSTOM RECOVERY FOR ANDROID JELLY BEAN​
Carliv Touch Recovery BASED​
Carliv Touch Recovery v2.1
Carliv Touch Recovery v2.2
Carliv Touch Recovery v2.4
Carliv Touch Recovery v2.5
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​ClockworkMod- CWM- BASED​
CWM 5.5.0.4
CWM 6.0.2.8
CWM 6.0.3.2
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​TeamWin Projects - TWRP BASED​
TWRP 2.7.1.0
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​PhilZ Touch - TWRP BASED​
PhilZ Touch 6.4.7.7
====================================================================================================​
CUSTOM RECOVERY FOR ANDROID KITKAT​
ClockworkMod- CWM- BASED​CWM based 6.0.2.8
ClockworkMod 6.0.3.3 Recovery (CWM) Non-touch
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​
Carliv Non-Touch Recovery BASED​
Modified Carliv CWM (non-touch) CWM 6.0.4.4
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​
Carliv Touch Recovery BASED​
Carliv Touch recovery 3.0
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​
PhilZ Touch BASED​[CWM Advanced Edition] PhilZ Touch 6.56.2 - cwm 6.0.5.0
[CWM Advanced Edition] PhilZ Touch 6.56.2 - cwm 6.0.5.0 aroma fixed
[CWM Advanced Edition] PhilZ Touch 6.576.9 - cwm 6.0.5.1
[CWM Advanced Edition] PhilZ Touch 6.576.9 - cwm 6.0.5.1 aroma fixed
-----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------​
TeamWin Projects - TWRP BASED​
TWRP 2.7.0.0
TWRP 2.8.0.0
TWRP 2.8.1.0
TWRP 2.8.2.0
TWRP 2.8.4.0
TWRP 2.8.4.0 rev 2
TWRP 2.8.5.0
====================================================================================================​
So dont get confused which one to use from all above.
THE BEST CUSTOM RECOVERY​
For JELLY BEAN ​Carliv Touch Recovery v2.5
For KitKat- use anyone​
[CWM Advanced Edition] PhilZ Touch 6.576.9 - cwm 6.0.5.1
TWRP 2.8.5.0
Test and report.
If you have any other working recovery please PM me.
HOW TO USE/FLASH CUSTOM RECOVERY.​
CREDITS​Credit goes to all involved in making them. (CWM team, TWRP team, PhilZ team, Carliv,yuweng)
hadiyalkishan- for JB & KK stock & testing
m0han - for ctr 2.5, for JB testing
rufus.reynolds - for KK testing
Jagadish-ravi - for JB & KK testing
vijay jay - for TWRP 2.7 testing
@Santhosh M - for TWRP 2.8.1.0
Thank You... Share Your Views...​
Many users dont know how to flash a custom recovery.
so i am making this thread which will guide u to flash a custom recoveries present in above thread.
​
If ur phone is rooted (supersu/superuser app is present in app drawer).
Method 1
Download and install flashify app from playstore
download custom recovery from above post.
Open flashify.
Backup current recovery.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
goto flash
recovery image
Choose downloaded recovery.img (it may have different name)
Now u can reboot.
To boot into recovery
press vol up button, keep it pressed.
press power on button till u see boot logo.
release power button.
after going into recovery release vol up button.
Method 2
Mobile uncle tool
1. Download Mobileuncle Tools APK.
2. Install the apk.
3. Copy the recovery.img extracted from to the sdcard.
4. Run MobileUncle Tools
5. Click on "Recovery Update".
6. You will see recovery.img on top. Install it.
7. Use MobileUncle to reboot into recovery..
If ur phone is not rooted
What's needed:
USB data cable
MediaTek USB VCOM drivers thanks to @smokerman sir
SP Flash Tool
First of all, make sure that you have MediaTek DA USB VCOM drivers installed.
Install spflash tools
download recovery.
rename it to recovery.img
download scatter file.
Put scatter file and recovery image in same folder.
open SP Flash Tool, then click Scatter-loading button to load the scatter file
(MT6589_Android_scatter_emmc.txt) and ignore any message that may appear.
The tool will immediately show a warning because not all parts are selected, but you should continue anyway. Safely press Yes to continue.
Press download button.
attach ur switched off phone with usb cable.
The download of the chosen partition image will start and after the yellow bar is complete, the popup with the green circle should appear.
Attention: Please follow the instructions carefully. I will not take any responsibility on whatever may happen with your phone.
PLEASE PRESS THANKS BUTTON IF THIS HELPS​
This just keeps getting better and better.....thanks millions....Avi....well collated recovery thread.....its has everything we need....
Thanks for this post, man. I'll try the Stock Recovery for the OTA I've been getting since months. Because I've read somewhere that OTA only works on Stock recoveries.
Edit: The Stock recoveries here are S003 and S011. Mine is S009. Which one should I try?
Sent from my Q3000 using XDA Premium 4 mobile app
Vineet3 said:
Thanks for this post, man. I'll try the Stock Recovery for the OTA I've been getting since months. Because I've read somewhere that OTA only works on Stock recoveries.
Edit: The Stock recoveries here are S003 and S011. Mine is S009. Which one should I try?
Sent from my Q3000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Save ur recovery and try S011.:good:
CTR 2.5 can be used to flash both JB & KK ROMs.
but backup & restore is not possible.
Thanks to @Jagadish-ravi
stuck at download mode
i have kitkat 4.4.2, Kernel 3.4.67, software version s003_15072014, non-rooted
i have installed mtk vcom, sp flash and tried to port cwm, but sp flash tool used to stuck at download mode....any help?
i have attached the screeshot for the reference....
Thanks in advance...
Sagar_Patel said:
i have kitkat 4.4.2, Kernel 3.4.67, software version s003_15072014, non-rooted
i have installed mtk vcom, sp flash and tried to port cwm, but sp flash tool used to stuck at download mode....any help?
i have attached the screeshot for the reference....
Thanks in advance...
Click to expand...
Click to collapse
First thing is
Please dont quote whole post.
it is posted by me only and just few post above on same page.
Ur screenshot is very poor cant see anything please re upload with good resolution.
after pressing that download button u need to connect ur phone in switched off condition.
r u doing this as instructed.??
Please explain the process ur following?
Ur porting cwm means??
Or u mean to say flashing/installing??
which cwm ur using please specify.?
ow! sorry for the way i had posted the thing but thanks for the way you replied- it was quite Quick!!
so, herewith i have attached the zip file (for the better resolution) and jpg file as well (size i could manage within the limitation of this forum) of screenshot where i stuck...View attachment 083.zip
yes, i connected my phone in switched off condition after pressing download button...
i had followed exactly the same way as you have explained for the non-rooted device....
and it was newbie thing that i had written "porting cwm" instead of "installing/flashing cwm"...yes, i was trying to flash/install cwm...
recovery i tried to install is:- [CWM Advanced Edition] PhilZ Touch 6.56.2 - cwm 6.0.5.0
Thanks for helping me...
sorry i had just forgotten to mention the scatter file i had used....obviously yes, it is the same as you have uploaded as:-
avi3230 said:
Install spflash tools
download recovery.
rename it to recovery.img
download scatter file.
Put scatter file and recovery image in same folder.
open SP Flash Tool, then click Scatter-loading button to load the scatter file
(MT6589_Android_scatter_emmc.txt) and ignore any message that may appear.
Click to expand...
Click to collapse
however, i had to rename it as MT6589_Android_scatter_emmc.txt as the scatter file i had downloaded had have the name as attachment.php
also note that i had put zip file of recovery [CWM Advanced Edition] PhilZ Touch 6.56.2 - cwm 6.0.5.0 and that scatter file in same folder as well....
kindly check if i had done any mistake there...
i have attached the scatter file to which i had renamed...
sp flash tool stuck at download mode?
ok may be i have found the mistake while posting just above the procedure i had done!!!
sp flash tool stuck at the download mode may be because i had done mistake (if it is?! ok, i cant confirm it until i can get xolo q3000 back to me or until someone here can confirm that yes, this was the mistake) as below:_
i had downloaded zip file of recovery
then i had downloaded scatter file of xolo q3000 as mentioned in my previous post
i had renamed the scatter file i had downloaded as MT6589_Android_scatter_emmc.txt as the scatter file i had downloaded had have the name as attachment.php (may be silly newbie thing here!!!)
i had put both those files in same folder
and did rest of the procedure as mentioned by avi3230 (OP) here in same thread for non-rooted xolo q3000 just a few posts above...
...and what should i have done?
i should have downloaded only the zip file of desired recovery and then if i extracted it, i could find that there are all the necessary files including recovery.img and scatter_file within the extracted folder!!!
i would like to attach screenshot of wrong thing i had done:- image named as "wrong"
and what i should have done is may be here:- image named as "may be"
i think i was trying to install zip file instead of recovery.img that should be there in extracted folder of recovery.zip along with the scatter_file as well...so, here now i have got where and why i had confused
Put scatter file and recovery image in same folder.
Click to expand...
Click to collapse
ok, if zip file of recovery has properly zipped, has properly downloaded and if it has properly extracted then you should find both the recovery.img and scatter_file within extracted folder....if not so, then you should put (get together) the scatter file and recovery image in "same folder" means in extracted folder....
confused? then i can only say sorry for my english but why i had posted the whole thing here? may be because someone can find that what kind of silly things those can be done by newbies....and if so, they can help....
Sagar_Patel said:
ok may be i have found the mistake while posting just above the procedure i had done!!!
.
Click to expand...
Click to collapse
OK dont worry about ur English or anything wrong u doing.
just follow these steps
this is considering ur running kitkat on ur phone (S003 or S007 build no)
download
1. SP_Flash_Tool
2. philz recovery - this or this
3. drivers - from here
extract drivers folder- mtkusball 0.9.2
open smartphone driver folder - x86/x64 according to ur windows os and install drivers.
or just select from autoinstall folder
connect ur phone in switch off condition to pc.
when asked fro drivers use MT65xx preloader drivers.
when u connect switched on phone and if asked for drivers use - android winusb drivers.
(please check in device manager after connecting ur phone in each case whether drivers are installed or any red triangle is ther)
restart ur computer.
extract sp tools in folder
extract philz recovery in a folder (it is in 7z or rar format just extratc in folder in winrar)
in philz folder u have scatter file, recovery.img boot.img and lk,bin files
start sp flash tools
select scatter loading
select scatter file from philz folder
deselect uboot and bootimg
press download button
connect ur switched off phone to usb cable.
flashing will be done
confirmed by green circle.
boot in recovery by pressing power + vol up button.
Reply if any issues.
avi3230 said:
OK dont worry about ur English or anything.....
....Reply if any issues.
Click to expand...
Click to collapse
just to add.... tip1: use usbdeview (g00gle) to remove all usb devices before adding your mobile device.
tip2 (based on my experience): try a previous (older) clean version of w!nd0ws also before giving up.
avi3230 said:
TeamWin Projects - TWRP BASED
TWRP 2.7.1.0
PhilZ Touch - TWRP BASED
PhilZ Touch 6.4.7.7
THE BEST CUSTOM RECOVERY
For JB
Carliv Touch Recovery v2.5
For KK
[CWM Advanced Edition] PhilZ Touch 6.56.2 - cwm 6.0.5.0
Click to expand...
Click to collapse
please do a twrp that'd work flawlessly on both jb & kk. thanks.
i suppose you're aware of this.
m0han said:
please do a twrp that'd work flawlessly on both jb & kk. thanks.
i suppose you're aware of this.
Click to expand...
Click to collapse
Yeah already seen that no support for philz now.
TWRP is bigger in size and u need to change partition size of recovery.
which is another headache for TWRP.
I already have it but again u need to flash whole stock rom again as whole
preloader boot recovery will change.
avi3230 said:
....TWRP is bigger in size and u need to change partition size of recovery.....
....I already have it but again u need to flash whole stock rom again as whole preloader boot recovery will change.
Click to expand...
Click to collapse
is it fully working on both bases - jb and kk? does it allow jb/kk rom switching? what are the drawbacks of flashing whole stock rom again?
what if we make full backup of data (call log/sms/mms/dictionary etc.) and also apps+apps-data using my backup app......
....... - can those be restored in the new setup and be up & running? if so, i don't foresee much troubles. do you?
you being much more experienced, please elaborate. thanks.
m0han said:
is it fully working on both bases - jb and kk? does it allow jb/kk rom switching? what are the drawbacks of flashing whole stock rom again?
what if we make full backup of data (call log/sms/mms/dictionary etc.) and also apps+apps-data using my backup app......
....... - can those be restored in the new setup and be up & running? if so, i don't foresee much troubles. do you?
you being much more experienced, please elaborate. thanks.
Click to expand...
Click to collapse
As TWRP is larger in size most of the time it wont boot in recovery.
also backing up of recovery wont work on 7mb recovery partition in any cwm based recovery.
So i feel we should stick to philz.
avi3230 said:
.....i feel we should stick to philz.
Click to expand...
Click to collapse
just in case you haven't seen this yet. this too.
wish you (or someone else) can do some magic!
m0han said:
just in case you haven't seen this yet. this too.
wish you (or someone else) can do some magic!
Click to expand...
Click to collapse
I already have twrp made for device which is easy.
its size is more than 6mb which is the issue.
u can change size of recovery to almost 11mb but then it wont boot in recovery specifically on 6589 chipsets. then whats t use.
to make it boot in recovery we need to change values in preloader.bin which is difficult task.
if anyone working on ubuntu please make an kernel with drivers files from this source.
if using this kernel twrp is less than 6mb then everything will be fine.

[Q] How to fix cwm recovery upside down view in mmx uinte 2 A106 ?

I flashed cwm recovery with rashr app on my unite 2. But when I entered in recovery mode, it showed upside down. Plz guide me. How to fix this..???
Looks like a weird problem. Don't use any app to flash CWM but if you have problem with using adb try ROM Manager By JRummy(available on Google Play, root needed) or if you want to flash by the custom recovery download the required custom recovery file from the internet(try using TWRP instead of CWM as there may be problem in CWM) . Download the file and locate it to the SD card and rename it update.zip.Go to the recovery mode and select update from zip navigate to the update.zip and select it.
Voila:thumbup::thumbup:

[RECOVERY] PhilZ Touch Recovery For Micromax Canvas Gold A300

Main Thread:
http://forum.xda-developers.com/showthread.php?t=2201860
THIS RECOVERY ONLY FOR T26V4.
Introduction:
PhilZ Touch is a CWM Advanced Edition that adds all the features you could ever miss in CWM. It is a well proven recovery for many phones! It also adds a full touch interface a completely configurable GUI
Features:
1. Aroma File Manager
2. Full Touch UI
3. On-Screen Navigation Keys:good:
Download:
Philz For Micromax A300 T-26:HERE
Aroma FM: http://forum.xda-developers.com/attachment.php?attachmentid=2231581&d=1378202418
How To Install:
NOTE: Your Phone Must Be Rooted For This Procedure! Please Root Your GOLD Before Installing PhilZ
1. Download PhilZ From Above Link.
2. Copy The Extracted recovery.img To Internal Storage.
3. Download & Install Mobile Uncle Tools From Here
4. Grant Root Access & Tap On Recovery Update.
5. Now Tap On recovery.img Shown There.
6. Tap On Yes.
7. You Have Successfully Installed PhilZ Touch Recovery On Your Canvas Gold
8. Now Extract Aroma FM And Copy All The Contents To Internal Storage/ClockWorkMod Folder
Other ways of doing the same are through Sp Flash Tools,Rashr,Flashify.Etc,
Credits:
1.TheDevilAshish
2.Yuvraj Kohli For Porting
3.Amit Pathak
4.Devrookie
5.Shhsaeed
6.OFC ME.[Akash Khatri]:silly:
Hit THANKS If I HELPED You:good:​​​​​
Backup and restore option in phiz recovery
Phiz recovery have backup and restore option? Please give 3.3 twrp recovery for Micromax canvas gold
Robins patel said:
Phiz recovery have backup and restore option? Please give 3.3 twrp recovery for Micromax canvas gold
Click to expand...
Click to collapse
Hello you can find the latest twrp recovery by @shhsaeed at www.canvasgoldroms.blogspot.in
Go in the recovery section.

Categories

Resources