Related
Hi all,
So, last night I successfully rooted and unlocked my One X on AT&T. Today, I tried putting a ROM on it. I flashed the boot.img first, then tried to install the ROM (Jelly Bean Sense). It failed for some reason, so I wiped and rebooted my phone.
Instead of going back to the stock ROM, the phone now will not turn on, is not recognized on both laptops I tried, and does not recognize even being charged. The only thing that happens is when I press down the power button, all of the soft keys illuminate and flash until I stop holding it. I've managed to get into the bootloader screen once, but the phone reset itself before I could do anything.
The only screen I can get to with the Vol Down+Power combo is the HTC Screen, but it's the one that shows before my custom recovery, with some warning from HTC in red letters at the bottom.
At this point, I just want a phone that works. This is a lot more complex [for me] than rooting and flashing a ROM to the Inspire I had for some reason. I fly out for vacation in two days for a few weeks, so I'd like to be able to avoid having to send this thing back to HTC or AT&T if possible.
ANY help is greatly appreciated.
If it's easier, feel free to Skype chat me.
Thanks!
Im confused.. it won't come on, but you can get to recovery? If you can manually boot into twrp you'll be fine.. may I ask which Rom you flashed? Did you flash the boot.img first? Or after you flashed Rom? Alot of guys will say flash boot.img first.. I don't have that funky hboot but I have to do my cousins alot and his will only boot correctly if I flash Rom first, then boot into bootloader and fastboot the boot.img.
Try that and let me know how it goes
Also... Let go of all the buttons when you see the white screen lol. That means you found bootloader
Sent from my HTC One XL using Tapatalk 2
InflatedTitan said:
Im confused.. it won't come on, but you can get to recovery? If you can manually boot into twrp you'll be fine.. may I ask which Rom you flashed? Did you flash the boot.img first? Or after you flashed Rom? Alot of guys will say flash boot.img first.. I don't have that funky hboot but I have to do my cousins alot and his will only boot correctly if I flash Rom first, then boot into bootloader and fastboot the boot.img.
Try that and let me know how it goes
Also... Let go of all the buttons when you see the white screen lol. That means you found bootloader
Sent from my HTC One XL using Tapatalk 2
Click to expand...
Click to collapse
I can get it to boot into the Bootloader screen and the TWRP now just fine, but that's as far as it will go. The internal SD will not mount with TWRP either now.
Here's the ROM I tried to flash: http://forum.xda-developers.com/showthread.php?t=2055490
I put it on my SD card, then extracted the boot.img to the folder I have my dab/fastboot files in, then flashed the boot.img, then tried to flash the ROM.
If I can get it working again, I'll try to do it in reverse order next time and see if that works. Still trying to find a way to get a ROM on here with my Mac, and to make my SD card work again. Everything on it is backed up so it's ok if I need to wipe it.
If you can get to bootloader, you're not bricked. It's just a matter of flashing the right stuff in the right order.
It could be that your sdcard is corrupted. Factory reset from bootloader will do it, but fixing it just a matter of formatting it again. Can you mount it on your computer? What happens when you plug into your PC?
Your sdcard is corrupt. No big deal but you'll lose everything. Plug it in into computer and locate the storage and try to find a way to format it. Sorry, I have no clue with a mac I swore off apple products :thumbup:
Anyway, you seem to know the ropes for the most part. If you can format, drag Rom onto SD. Wipe everything in twrp. Cache, dalvick, factory reset, system. Flash Rom.. immediately boot into bootloader and fastboot the boot.img. choose reboot from bootloader. Good luck!
Sent from my HTC One XL using Tapatalk 2
Yep, I also suggest doing a factory reset from the bootloader ( which will erase your internal storage) but at least you'll be able to mount your SD card, put a ROM on it and flash it. I would highly recommended you to flash viper 3.0.0, you don't need to flash the boot.img and its pretty much stock JB with some tweaks.
Sent from my HTC One XL using Tapatalk 2
I am having this same problem (minus the custom screen).
My phone will boot into TWRP and all, but it won't mount (PC says the disk needs to be formatted before it can be used). When I go to reboot or anything from TWRP, it tells me there is no OS installed and am I sure.
Can anyone help?
That's good news!
I tried doing a factory reset from bootloader, but nothing happened. Maybe because the SD card won't mount?
I only have a Mac, with no PC in sight. It doesn't show up at all on here. Fastboot USB, or when I mount it as USB in TWRP. It does however show up as a device in recovery in terminal. But nothing on the desktop. Apple+Android do not mix well!
I'm ok with losing my data, what I'm not OK with is having to use this pink Razr while my nice phone is broken :'(
Thanks for all the help so far!
I do a factory reset from bootloader, it takes me into TWRP. Now is the only time it will even remotely show up on my laptop, and even then it's only via terminal when I do adb devices. Since it can't mount for some reason, is there a way to reformat via Terminal, and maybe even push the ROM to my phone from there? That's something I'm not familiar with.
elijahpr said:
I do a factory reset from bootloader, it takes me into TWRP. Now is the only time it will even remotely show up on my laptop, and even then it's only via terminal when I do adb devices. Since it can't mount for some reason, is there a way to reformat via Terminal, and maybe even push the ROM to my phone from there? That's something I'm not familiar with.
Click to expand...
Click to collapse
Format your sd..drag Rom..wipe..flash..enjoy
omario8484 said:
Format your sd..drag Rom..wipe..flash..enjoy
Click to expand...
Click to collapse
I can't format because it doesn't show up on my computer, and doing so in bootloader takes me to TWRP.
emylibef said:
I am having this same problem (minus the custom screen).
My phone will boot into TWRP and all, but it won't mount (PC says the disk needs to be formatted before it can be used). When I go to reboot or anything from TWRP, it tells me there is no OS installed and am I sure.
Can anyone help?
Click to expand...
Click to collapse
Hey dude, I followed their advice (dug out my XP machine) and now my SD card is re-formatted.
Get into the bootloader screen, hit factory reset. (When I did this on mine, it took me right to TWRP)
From there, I mounted as USB and it showed up as needing to be reformatted on my XP machine. Took a few minutes to do on this dinosaur, but it worked, cause everything is gone!
Right now I'm in the process of zipping up the Viper XL ROM (thanks for the recommendation barondebxl, it looks awesome!), which I'll put onto my SD card and wipe/flash from there. (on my Mac now).
Hopefully it works!
I'm unable to flash ROMs for some reason. It doesn't give an error, just says that it failed. Any ideas?
elijahpr said:
Get into the bootloader screen, hit factory reset.
Click to expand...
Click to collapse
No no no. This is what is corrupting your sdcard. Only do a factory reset in TWRP or once booted up. Start over and format again. Then copy over your rom.
When you and a few others mentioned doing it, what were you referring to?
I've tried three different ROMs now, and each fails without saying why in TWRP.
Problem solved! Got the stock RUU back on there and it works perfectly. Just re-rooted and unlocked again. Round two..
My buddy is having a hard time flashing a new ROM on his tablet. Currently he's running Cyanogen with TWRP.
Apparently TWRP formatted his tablet randomly and he hasn't been able to install a new ROM because his tablet won't mount the system or cache. It keeps failing. Neither system or cache are selectable to mount and it says "E: unable to mount '/system' "
And ADB isn't pushing anything.
Any thoughts why?
Sunset Rider said:
My buddy is having a hard time flashing a new ROM on his tablet. Currently he's running Cyanogen with TWRP.
Apparently TWRP formatted his tablet randomly and he hasn't been able to install a new ROM because his tablet won't mount the system or cache. It keeps failing. Neither system or cache are selectable to mount and it says "E: unable to mount '/system' "
And ADB isn't pushing anything.
Any thoughts why?
Click to expand...
Click to collapse
TWRP formatted his tablet randomly??? Never heard of such a thing!
And we need more information:
What versions of bootloader, CM, TWRP and you are trying to push what in ADB?
Do you have access to fastboot? What rom are you trying to flash?
What did he do - as best as he can remember?
berndblb said:
TWRP formatted his tablet randomly??? Never heard of such a thing!
And we need more information:
What versions of bootloader, CM, TWRP and you are trying to push what in ADB?
Do you have access to fastboot? What rom are you trying to flash?
What did he do - as best as he can remember?
Click to expand...
Click to collapse
It wiped his data when he went to decrypt data and it asked for a password. He hit cancel and it said system memory 0gb
He has the newest twrp, he was on 10.2 trying to go to 11, and he was trying to push the mounting through adb and was getting errors. Because he is unable to select them In twrp
He has fastboot but it doesn't respond to commands at all.
Thank you for any help
fastboot
Sunset Rider said:
It wiped his data when he went to decrypt data and it asked for a password. He hit cancel and it said system memory 0gb
He has the newest twrp, he was on 10.2 trying to go to 11, and he was trying to push the mounting through adb and was getting errors. Because he is unable to select them In twrp
He has fastboot but it doesn't respond to commands at all.
Thank you for any help
Click to expand...
Click to collapse
Sounds like a soft brick.. Due to a wrong recovery flash or he flashed the newest version of twrp, and did a full data wipe.. It has known issues!!!!!
Becareful from here.. Like berndblb said we need verify we still have fastboot access!!:fingers-crossed:
What is the OS of the PC your using to fastboot from??
Well I tried installing cromi for him and it stalls at 87%
Sunset Rider said:
Well I tried installing cromi for him and it stalls at 87%
Click to expand...
Click to collapse
UPDATE: We restarted the tablet, mid installation because it froze, and it booted up to his old 10.2 just fine. I recommended he do a clean format now but he doesn't want to do anything lol.
So right now I'm just thanking God he didn't brick it hard
Sunset Rider said:
It wiped his data when he went to decrypt data and it asked for a password. He hit cancel and it said system memory 0gb
Click to expand...
Click to collapse
Did he have the tablet encrypted or did the request for a decryption password just show up unexpectedly? If it's the latter - I have read about this a number of times - unfortunately still cannot make rhyme or reason out of it, but I suspect it's a corrupted recovery....
He has the newest twrp, he was on 10.2 trying to go to 11, and he was trying to push the mounting through adb and was getting errors. Because he is unable to select them In twrp
Click to expand...
Click to collapse
The newest meaning 2.6.3.2?
He has fastboot but it doesn't respond to commands at all.
Thank you for any help
Click to expand...
Click to collapse
Which probably means he doesn't have the correct fastboot drivers installed. That would No. 1: Get fastboot working. Download the Google Universal Naked drivers, install them and try
Code:
fastboot devices
If that returns the tablet's serial number, you're in business. You could then flash CWM 6.0.4.6 in fastboot. I would probably wipe data (hope he has everything backed up) and flash the rom.
---------- Post added at 10:18 PM ---------- Previous post was at 10:10 PM ----------
lj50036 said:
Sounds like a soft brick.. Due to a wrong recovery flash or he flashed the newest version of twrp, and did a full data wipe.. It has known issues!!!!!
Becareful from here.. Like berndblb said we need verify we still have fastboot access!!:fingers-crossed:
What is the OS of the PC your using to fastboot from??
Click to expand...
Click to collapse
@lj50036 could you elaborate on the issues of TWRP 2.6.3.2.? sbdags included it it in his bootloader/TWRP flash package for CROMi-X and one guy just softbricked flashing CROMi_X after flashing that package, he seems to have done everything else correctly and I suspect the recovery is buggy???
TWRP
could you elaborate on the issues of TWRP 2.6.3.2.? sbdags included it it in his bootloader/TWRP flash package for CROMi-X and one guy just softbricked flashing CROMi_X after flashing that package, he seems to have done everything else correctly and I suspect the recovery is buggy???
Click to expand...
Click to collapse
My issues are first hand.. It flashes just fine, everything seems to function correctly.. It's only the wiping of data that has a issue.... It just hangs says its doing it thing but nothing ever happens..After a hard reboot TWRP now asking for password will not mount any storage of any kind... The fastest way to a soft brick.... I posted on the TWRP forum, about the issue... Maybe we need a new forum letting people know about the issue, so we dont end up with a riot!!!
lj50036 said:
My issues are first hand.. It flashes just fine, everything seems to function correctly.. It's only the wiping of data that has a issue.... It just hangs says its doing it thing but nothing ever happens..After a hard reboot TWRP now asking for password will not mount any storage of any kind... The fastest way to a soft brick.... I posted on the TWRP forum, about the issue... Maybe we need a new forum letting people know about the issue, so we dont end up with a riot!!!
Click to expand...
Click to collapse
Thanks! Though I would love to see what a riot on XDA looks like LOL
berndblb said:
Did he have the tablet encrypted or did the request for a decryption password just show up unexpectedly? If it's the latter - I have read about this a number of times - unfortunately still cannot make rhyme or reason out of it, but I suspect it's a corrupted recovery....
The newest meaning 2.6.3.2?
Which probably means he doesn't have the correct fastboot drivers installed. That would No. 1: Get fastboot working. Download the Google Universal Naked drivers, install them and try
Code:
fastboot devices
If that returns the tablet's serial number, you're in business. You could then flash CWM 6.0.4.6 in fastboot. I would probably wipe data (hope he has everything backed up) and flash the rom.
---------- Post added at 10:18 PM ---------- Previous post was at 10:10 PM ----------
@lj50036 could you elaborate on the issues of TWRP 2.6.3.2.? sbdags included it it in his bootloader/TWRP flash package for CROMi-X and one guy just softbricked flashing CROMi_X after flashing that package, he seems to have done everything else correctly and I suspect the recovery is buggy???
Click to expand...
Click to collapse
It was version 2.6.3.0.
He had no decrypted files he was just seeing what it did when he hit decrypt data. I asked for a password which he obviously never set and hit cancel. And it said he had nothing in internal storage.
However, after the install froze on an older Cromi version I put on his sd card (from my 700t), we held down the power button and rebooted. It booted up fine to his previous Cyanogen 10.2. WITH all of his internal storage still there, EVEN THOUGH, he did a format from TWRP already.
So it's definitely a problem with TWRP. His tablet is back to the way it was before the fiasco and he is afraid to do anything else.
Sunset Rider said:
It was version 2.6.3.0.
He had no decrypted files he was just seeing what it did when he hit decrypt data. I asked for a password which he obviously never set and hit cancel. And it said he had nothing in internal storage.
However, after the install froze on an older Cromi version I put on his sd card (from my 700t), we held down the power button and rebooted. It booted up fine to his previous Cyanogen 10.2. WITH all of his internal storage still there, EVEN THOUGH, he did a format from TWRP already.
So it's definitely a problem with TWRP. His tablet is back to the way it was before the fiasco and he is afraid to do anything else.
Click to expand...
Click to collapse
Are you sure about this???
Because TWRP 2.6.3.0 was too big for the recovery partition of the TF700 and never properly installed????
For any reliable advice you need to provide the bootloader version (which you still haven't given us) and if you have a working system, you should be able to boot into recovery and give us it's version number.
For installing CM 11 on the TF700 you need to be on the 10.6.1.14.10 bootloader and have the CWM 6.0.4.6 recovery.
TWRP 2.6.3.2 supposedly works with CM 11, but I would not trust it - read about too many problems with it....
And anyway - in terms of performance, neither CM 10.2 or CM 11 beats CROMi-X on this tablet - period.
Here I am
berndblb said:
Are you sure about this???
Because TWRP 2.6.3.0 was too big for the recovery partition of the TF700 and never properly installed????
For any reliable advice you need to provide the bootloader version (which you still haven't given us) and if you have a working system, you should be able to boot into recovery and give us it's version number.
For installing CM 11 on the TF700 you need to be on the 10.6.1.14.10 bootloader and have the CWM 6.0.4.6 recovery.
TWRP 2.6.3.2 supposedly works with CM 11, but I would not trust it - read about too many problems with it....
And anyway - in terms of performance, neither CM 10.2 or CM 11 beats CROMi-X on this tablet - period.
Click to expand...
Click to collapse
Hey guys, this is Wade, the cause of the whole fiasco.
It was the newest TWRP 2.3.6.2, but I imagine it might've been a problem with the bootloader? I had no idea that the bootloader needed updating; I thought that once you could boot what you wanted, that was it, but obviously I'm mistaken. Where do I find the bootloader version? It was the latest posting to the Asus download site, or the V8, 2013 bootloader edition for JB. 4.2
Basically, I had tried several times that day installing CM11 and the gapps with CWM 6.0.3.1 (which ROM manager says is the up to date version? WTF?) to no avail. It kept giving me md5sum errors, and I couldn't find anything to easily fix that. CWM would also not respond to commands from ROM manager other than backups... If i told it to bootload and flash, it would just reboot normally... ADB also would fail, despite saying that i COULD connect to fastboot.
So i read on the actual CM forum that the newest TWRP 2.6.3.2 would do the trick as well, and tried that. But ya, once i booted into twrp, it threw a password query at me. I never set a password, so I pressed cancel, and that's when the partition showed up as blank.
I went to reboot, but it warned that I had no OS installed. That's about when I freaked out. It would see my microSD fine, but wasn't able to talk to /system to actually flash anything, and ADB would just give "error:closed" if I tried any mount commands there.
So ya, I invited my buddy over, and he recommended we try flashing an old CROMI-X, and it WORKED! sort of. It started to flash, even though a previous CM 10.2 and it's gapps (which I was already running and knew worked) wouldn't!
Then it froze installing Youtube, and after ten mins we held down the power.
And it booted back into CM 10.2 like nothing had happened.
Even though TWRP said I had succesfully factory reset AND wiped AND formatted the internal by that point. Lies!
So ya, I imagine it's a combination of pilot error, and TWRP being a little fluky. My question - where did that 87% CROMI-X flash go, and how can I get rid of it? And i reflashed CWM 6.0.3.1, but I'm still wary of going into the bootloader, just in case bastard TWRP is still lurkin
UPDATE
Wadesauce said:
I had no idea that the bootloader needed updating; I thought that once you could boot what you wanted, that was it, but obviously I'm mistaken. Where do I find the bootloader version? It was the latest posting to the Asus download site, or the V8, 2013 bootloader edition for JB. 4.2
Click to expand...
Click to collapse
So it was definitely the old ASUS 4.2 bootloader I was using. I had no idea that dasunsrule32 wanted us to use his April 2013 bootloader for 10.2 as well, the site that told me how to put CM 10.2 on my tab said to use the old ASUS one.
Finally manned up and tried my first soft reboot, and it brought up the ASUS menu with the blue loading bar - it seemed like it wanted to go into bootloader. Then it went blank and the regular ASUS logo showed, and then the CM logo and booted. So i didn't walk away from this unscathed; something low-down got messed with...
Can I update the bootloader to his, despite the problems ive been having? How do I do that?
And why does ROM manager only offer 6.0.3.1??
And since CM11 is based on 4.4, wont it eventually be better than CROMi-X?
Wadesauce said:
So it was definitely the old ASUS 4.2 bootloader I was using. I had no idea that dasunsrule32 wanted us to use his April 2013 bootloader for 10.2 as well, the site that told me how to put CM 10.2 on my tab said to use the old ASUS one.
So can I update the bootloader to his, despite the problems ive been having? How do I do that?
And why does ROM manager only offer 6.0.3.1??
And since CM11 is based on 4.4, wont it eventually be better than CROMi-X?
Click to expand...
Click to collapse
Can you still boot into fastboot mode on your tablet and can your PC see the tablet in fastboot mode?? What is the OS on your PC??
i dunno
lj50036 said:
Can you still boot into fastboot mode on your tablet and can your PC see the tablet in fastboot mode?? What is the OS on your PC??
Click to expand...
Click to collapse
I haven't tried booting into bootloader, or even a full power down/power up yet. This is the device I use for school and right now would be a pretty sh**y time for anything serious to happen to it.
I am mainly afraid that TWRP hasn't left yet, or that I won't be able to access the CWM that ROM manager says I just successfully reflashed.
I don't really want to plug it back into the computer until I know more about what happened to it. Is it likely that the CROMI that we tried flashing or the old TWRP will cause me problems? Remember that CROMI said it was 87% successful (had loaded kernel and system and all that jazz)
And I have 64 bit Win7, it should have appropriate drivers
Feedback
Wadesauce said:
I haven't tried booting into bootloader, or even a full power down/power up yet. This is the device I use for school and right now would be a pretty sh**y time for anything serious to happen to it.
I am mainly afraid that TWRP hasn't left yet, or that I won't be able to access the CWM that ROM manager says I just successfully reflashed.
I don't really want to plug it back into the computer until I know more about what happened to it. Is it likely that the CROMI that we tried flashing or the old TWRP will cause me problems? Remember that CROMI said it was 87% successful (had loaded kernel and system and all that jazz)
And I have 64 bit Win7, it should have appropriate drivers
Click to expand...
Click to collapse
Well you just let me know.. I will be here to help out if you would like it ....As always thx lj
Wadesauce said:
Hey guys, this is Wade, the cause of the whole fiasco.
It was the newest TWRP 2.3.6.2, but I imagine it might've been a problem with the bootloader? I had no idea that the bootloader needed updating; I thought that once you could boot what you wanted, that was it, but obviously I'm mistaken. Where do I find the bootloader version? It was the latest posting to the Asus download site, or the V8, 2013 bootloader edition for JB. 4.2
Basically, I had tried several times that day installing CM11 and the gapps with CWM 6.0.3.1 (which ROM manager says is the up to date version? WTF?) to no avail. It kept giving me md5sum errors, and I couldn't find anything to easily fix that. CWM would also not respond to commands from ROM manager other than backups... If i told it to bootload and flash, it would just reboot normally... ADB also would fail, despite saying that i COULD connect to fastboot.
So i read on the actual CM forum that the newest TWRP 2.6.3.2 would do the trick as well, and tried that. But ya, once i booted into twrp, it threw a password query at me. I never set a password, so I pressed cancel, and that's when the partition showed up as blank.
I went to reboot, but it warned that I had no OS installed. That's about when I freaked out. It would see my microSD fine, but wasn't able to talk to /system to actually flash anything, and ADB would just give "error:closed" if I tried any mount commands there.
So ya, I invited my buddy over, and he recommended we try flashing an old CROMI-X, and it WORKED! sort of. It started to flash, even though a previous CM 10.2 and it's gapps (which I was already running and knew worked) wouldn't!
Then it froze installing Youtube, and after ten mins we held down the power.
And it booted back into CM 10.2 like nothing had happened.
Even though TWRP said I had succesfully factory reset AND wiped AND formatted the internal by that point. Lies!
So ya, I imagine it's a combination of pilot error, and TWRP being a little fluky. My question - where did that 87% CROMI-X flash go, and how can I get rid of it? And i reflashed CWM 6.0.3.1, but I'm still wary of going into the bootloader, just in case bastard TWRP is still lurkin
Click to expand...
Click to collapse
Jeez - where to start?
First of all: Do yourself a favor and ditch ROM Manager. It does not work well with the TF700 and several people have hard bricked using it. You have been very lucky so far!
Second: Do not flash anything until you are 150% sure you know what you are doing, you understand the requirements for your situation and have everything you need at hand.
Do not flash anything EVER if you do not know what bootloader version you have. That's like getting into your car blind folded and trusting that your GPS will drive you safely to your destination.
Every ROM has it's requirements in terms of bootloader version and recovery and they are usually clearly stated in the first couple of paragraphs in the OP of the rom thread. If not: Stay away from that rom unless you know exactly what you are doing!
TWRP 2.6.3.2 has major issues when formatting data from it. Stay away from it for now.
To find out what you can do to get a stable system back, you need to know where you are and what you have.
Boot into the bootloader (and do not use ROM Manager to do it!) and read the tiny script. It'll probably be 10.6.1.14.10 or .8
Post the result.
Boot into the recovery to check what you have installed. Versions matter!
The proper way of installing a custom recovery is in fastboot mode. Which is different from ADB, btw - you've been mixing those up I think.
Google "adb fastboot tutorial" and do some reading. Once you understand, get it set up on your PC, boot the tablet into the bootloader, connect both via original USB cable and test the connection with
Code:
fastboot devices
If it returns the serial number of your tablet, you are in business and we can continue from there.
Happy studying!
Getting there...
berndblb said:
Google "adb fastboot tutorial" and do some reading. Once you understand, get it set up on your PC, boot the tablet into the bootloader, connect both via original USB cable and test the connection with
Code:
fastboot devices
If it returns the serial number of your tablet, you are in business and we can continue from there.
Happy studying!
Click to expand...
Click to collapse
Alright, I have done some reading as far as all of this goes. I understand a lot of it better now.
So I'm positive now that it was because I hadn't updated my bootloader before trying through CWM. And TWRP obviously was no more useful.
I haven't quite checked what the bootloader version is - I think there may be something wrong with it still (given my weird boot-up) and I don't want to go there until I'm totally sure what I'm doing. I'd hate to hit bootloader and then realize something was seriously wrong, and my time was ticking.
However, I have never changed the bootloader since I used ASUS's one from their website originally - since it says v8, I imagine thats the .8 one?
Before I uninstalled ROM manager, I checked what it said my recovery was - and it said I had CWM 6.0.3.1 still, even though the TWRP fiasco has just gone down. I used ROM to reflash the same 6.0.3.1 from the device, and it said it was successful.
So before I begin, could i possibly ask a few questions?
1) Could I have corrupted the bootloader?
2) Can more than one recovery exist? Is it maybe true that CWM 6.0.3.1 would be the one I will boot into if I went into recovery? I REALLY don't want it to be TWRP again as it might not survive the experience (I had put TWRP on via fastboot). Should I just get to bootloader, flash a new recovery right away and go from there?
3) When I go to finally solve it, what are the hypothetical steps I should take? Right now, as far as I can tell, it will be:
a) Make sure all drivers are working, and files (including backup) are on my PC.
b) reboot into bootloader, check version.
c) flash the 10.6.1.14.4 bootloader
d) reboot
e) reboot into bootloader
f) flash CWM. 6.0.4.6
g) reboot
i) reboot into bootloader, into recovery, then flash CM 11 and gapps
j) reboot
Ya? No? Any help would be appreciated
Wadesauce said:
Alright, I have done some reading as far as all of this goes. I understand a lot of it better now.
So I'm positive now that it was because I hadn't updated my bootloader before trying through CWM. And TWRP obviously was no more useful.
I haven't quite checked what the bootloader version is - I think there may be something wrong with it still (given my weird boot-up) and I don't want to go there until I'm totally sure what I'm doing. I'd hate to hit bootloader and then realize something was seriously wrong, and my time was ticking.
However, I have never changed the bootloader since I used ASUS's one from their website originally - since it says v8, I imagine thats the .8 one?
Before I uninstalled ROM manager, I checked what it said my recovery was - and it said I had CWM 6.0.3.1 still, even though the TWRP fiasco has just gone down. I used ROM to reflash the same 6.0.3.1 from the device, and it said it was successful.
So before I begin, could i possibly ask a few questions?
1) Could I have corrupted the bootloader?
2) Can more than one recovery exist? Is it maybe true that CWM 6.0.3.1 would be the one I will boot into if I went into recovery? I REALLY don't want it to be TWRP again as it might not survive the experience (I had put TWRP on via fastboot). Should I just get to bootloader, flash a new recovery right away and go from there?
3) When I go to finally solve it, what are the hypothetical steps I should take? Right now, as far as I can tell, it will be:
a) Make sure all drivers are working, and files (including backup) are on my PC.
b) reboot into bootloader, check version.
c) flash the 10.6.1.14.4 bootloader
d) reboot
e) reboot into bootloader
f) flash CWM. 6.0.4.6
g) reboot
i) reboot into bootloader, into recovery, then flash CM 11 and gapps
j) reboot
Ya? No? Any help would be appreciated
Click to expand...
Click to collapse
1. No, your bootloader is still good because you still can boot into your system. You need your bootloader to initiate your hardware before your OS is booting.. I am very sure that is the case but it would be nice for someone to confirm it...
2. Your recovery partition is too small for two custom recoveries to exist. So it is almost impossible for you to have two recoveries..
Before you want to go further, it is easier to find out your bootloader and recovery versions so you know what is the next step that you need to do. Otherwise, it is just a guess or a shot in the dark... I think that you are fine but you need to wait for some experts to confirm it... Good luck...:fingers-crossed:
Please bear with me
LetMeKnow said:
Before you want to go further, it is easier to find out your bootloader and recovery versions so you know what is the next step that you need to do. Otherwise, it is just a guess or a shot in the dark... I think that you are fine but you need to wait for some experts to confirm it... Good luck...:fingers-crossed:
Click to expand...
Click to collapse
Sorry hahah, I know I must seem really frustrating...
I have held off for 2 reasons:
1. The first time I did a soft reboot after my fiasco, upon boot it went through the first series of steps trying to load into the bootloader, but then booted fine. Another time a few days after, it rebooted while i was using it, and just went blank after the asus logo. Holding the power down caused it to boot fine. Still, neither of those had ever happened before, and I am pretty sure that some point along the line of bootloader-->OS something is broken. Hopefully on the OS side.
2. I am not going to attempt to boot into recovery until I know that it isn't the same TWRP 2.6.3.2 that got me into this whole fiasco. I know it sounds like a catch 22, not wanting to reboot into recovery to check what it is, but I have NO IDEA how to get out of this TWRP as it stands. I had to flash a CROMI (which failed at 87%) and hard reboot. Not willing to go out on a limb and assume that hard-reboot will work during any step of that process.
So, why do I have to check it? Can't I boot into bootloader, flash a new bootloader, flash a new recovery, and then reboot normally? Assuming I'll be able to establish fastboot (drivers still work, so fingers crossed on that one).
Hey guys,
I'm having some trouble with flashing a new ROM and now I've soft-bricked my device.
I was trying to flash from CROMi to CM11 so I wiped data, cache, dalvik using TWRP. But when i tried to flash CM11 M9, i would get the "failed" error. I tried flashing other ROMs but same result - "FAILED".
So I thought maybe it was the recovery. I downloaded a CWM recovery (in .zip) and tried to flash it. FAILED!
I tried to restore my device using the "Recover /Downgrade from Jelly Bean to ICS/Clean Factory Restore with custom recovery" method from this post. Since it is basically flashing the stock ROM, naturally it fails.
Now I'm out of ideas. How can I save my tablet?
Thanks for your help guys!
PS: I'm trying to install CMW via fastboot. When I press power + vol down, I get to the screen with "RCK, Android, Data Wipe"; I dont see the USB icon. How do i boot into fastboot?
You are in fastboot mode when you see the three icons. Read the tiny script.
Except for CM11 M9 you did not give us anything to work with.
Give us the version numbers of:
- CROMi-X you were running
- your bootloader
- your recovery
My best guess is you are trying to flash something with an incompatible recovery, but that's just a wild guess.....
And stop flashing willy nilly until you know what's going on. You can brick this tablet if you try hard enough, you know....
berndblb said:
You are in fastboot mode when you see the three icons. Read the tiny script.
Except for CM11 M9 you did not give us anything to work with.
Give us the version numbers of:
- CROMi-X you were running
- your bootloader
- your recovery
My best guess is you are trying to flash something with an incompatible recovery, but that's just a wild guess.....
And stop flashing willy nilly until you know what's going on. You can brick this tablet if you try hard enough, you know....
Click to expand...
Click to collapse
Hey bern,
Thanks for the reply.
My tablet got really slow so I decided to flash CM 11 M9, which is what I use on my Note 3.
I'm running TWRP 2.6.1.0. Not sure which CROMi I was running because I can't boot into Android. I did a data wipe prior to (attempting to) flashing CM11 and now it boots straight to recovery.
I read that TWRP is not compatible with CM11 and that I should flash CWM. But TWRP fails when I try to flash anything so I'm thinking I should attempt ADB sodeload or terminal command and load that way?
Thanks again
Edit: I downloaded CM11 M9 for tf700. I also tried various nightlies in case my original download was corrupt. It ends in failure
berndblb said:
You are in fastboot mode when you see the three icons. Read the tiny script.
Except for CM11 M9 you did not give us anything to work with.
Give us the version numbers of:
- CROMi-X you were running
- your bootloader
- your recovery
My best guess is you are trying to flash something with an incompatible recovery, but that's just a wild guess.....
And stop flashing willy nilly until you know what's going on. You can brick this tablet if you try hard enough, you know....
Click to expand...
Click to collapse
Hi berndblb!
I'm also having this problem and I see that you're quite active in the TF700 forum that you could help me out. I wouldnt say I'm an expert but I have tinkered with phones (mostly Samsung and Nexus devices) in the past so I am familiar with ADB, terminal commands, flashing ROMs, etc.
I'm running TWRP 2.6.1. I was running CROMi-X (not sure which version) and wanted to flash OmniROM. However, TWRP would show "error flashing zip" and "failed" in red. I tried flashing a few other zips including TWRP 2.7.1.1 and CWM (I readTWRP is not compatible with some ROMs) and I would still get the error and "failed".
So now, I can't boot into the OS to flash a recovery via fastboot or via CWM Rom Manager, nor can I flash anything in TWRP. I also attempted to flash TWRP 2.7.1.1 via terminal command
HTML:
dd if=/sdcard/twrp.blob of=/dev/block/mmcblk0p4[HTML]. I loads but it doesnt install when i restart my device.
What do you think I should try next? I'm getting pretty desperate at this point. Is my device bricked-bricked or can i salvage it?
Thanks!
oh.herro said:
Hi berndblb!
I'm also having this problem and I see that you're quite active in the TF700 forum that you could help me out. I wouldnt say I'm an expert but I have tinkered with phones (mostly Samsung and Nexus devices) in the past so I am familiar with ADB, terminal commands, flashing ROMs, etc.
I'm running TWRP 2.6.1. I was running CROMi-X (not sure which version) and wanted to flash OmniROM. However, TWRP would show "error flashing zip" and "failed" in red. I tried flashing a few other zips including TWRP 2.7.1.1 and CWM (I readTWRP is not compatible with some ROMs) and I would still get the error and "failed".
So now, I can't boot into the OS to flash a recovery via fastboot or via CWM Rom Manager, nor can I flash anything in TWRP. I also attempted to flash TWRP 2.7.1.1 via terminal command
HTML:
dd if=/sdcard/twrp.blob of=/dev/block/mmcblk0p4[HTML]. I loads but it doesnt install when i restart my device.
What do you think I should try next? I'm getting pretty desperate at this point. Is my device bricked-bricked or can i salvage it?
Thanks![/QUOTE]
Can you enter fastboot at all ?
Thx Josh
Click to expand...
Click to collapse
r3dal3rt said:
Hey bern,
Thanks for the reply.
My tablet got really slow so I decided to flash CM 11 M9, which is what I use on my Note 3.
I'm running TWRP 2.6.1.0. Not sure which CROMi I was running because I can't boot into Android. I did a data wipe prior to (attempting to) flashing CM11 and now it boots straight to recovery.
I read that TWRP is not compatible with CM11 and that I should flash CWM. But TWRP fails when I try to flash anything so I'm thinking I should attempt ADB sodeload or terminal command and load that way?
Thanks again
Edit: I downloaded CM11 M9 for tf700. I also tried various nightlies in case my original download was corrupt. It ends in failure
Click to expand...
Click to collapse
Right now the most important thing is the bootloader version ....
On the bootloader screen upper left there is a bootloader version in really small print ...
This is what we need to know ...
Thx Josh
lj50036 said:
Right now the most important thing is the bootloader version ....
On the bootloader screen upper left there is a bootloader version in really small print ...
This is what we need to know ...
Thx Josh
Click to expand...
Click to collapse
Exactly.
I also would like to know how you performed the wipe you mentioned. The tablet booting only and straight to recovery would indicate that you used 'Wipe Data' from the bootloader???
Also, do not use ROM Manager. It does not work well with the Transformers and can cause a lot of problems.
I have a feeling another user is going to benefit from your excellent unbrick guide, Josh...
Aren't you glad you wrote it?? [emoji12]
lj50036 said:
Can you enter fastboot at all ?
Thx Josh
Click to expand...
Click to collapse
Hi Josh. All i get is the Asus starting screen and "your device is unlocked". Power + vol down doesn't not take me to bootloader.
oh.herro said:
Hi Josh. All i get is the Asus starting screen and "your device is unlocked". Power + vol down doesn't not take me to bootloader.
Click to expand...
Click to collapse
No boot to recovery ?
No bootloader ?
No nvflash blob backups ?
If that is the case then you are not looking good ...
There is no way out of this one ...
We need fastboot or recovery one or the other ..
Sorry for the bad news ....
Thx Josh
oh.herro said:
Hi Josh. All i get is the Asus starting screen and "your device is unlocked". Power + vol down doesn't not take me to bootloader.
Click to expand...
Click to collapse
I agree with lj - not looking good. [emoji17]
Do you have adb access when it boots to the Asus splash screen?
Actually it might be a little more complicated...
Full story: I was trying to flash cyanogenmod so I unlocked the bootloader and flashed cwm and SuperSU. Until this point everything worked just fine. I copied the CM-zip to the root of my phone. When trying to install CM however I got an error saying "Some changes failed" (Status 7), basically this. Also I started having trouble booting the system normally. The phone would either get stuck at the bootloader unlocked screen or just boot into recovery. I had done a backup at some point (not prior to starting to try to flash CM, I didn't really think I'd need one since the phone was brand new and I didn't there was any data on it I'd miss... yeah, well...) and sometimes restoring it would enable me to boot normally. However, after the factory reset before my nth attempt to install CM, that was gone as well. After doing a bit of research I found this thread. Since I had version 6.0.13 of cwm as well, I flashed twrp v2.7.1.2 instead. The interface is a little friendlier, but other than that there have been no changes.
Now I can't boot the system normally, not even by selecting "System" when rebooting it from recovery, it will just keep booting into recovery. I can still fastboot, though. My CM-zip is gone since that infamous factory reset and I can't get it back on the phone, or anything else for that matter, since my pc only detects the phone when it's booted normally. I tried pushing CM with adb but when I try to mount any partition I get an error saying E: Unable to find storage partition to mount to USB.
Any ideas how I could fix this mess? Or suggestions on how to avoid ****ing it up any further...
If you can adb, you can adb push... You are just adb push'ing to the wrong place I suppose.
Code:
adb push blah.zip /sdcard/
Should work...
Or even better, just sideload (put phone in recovery & 'sideload mode' before running):
Code:
adb sideload blah.zip
Either way, CWM for our device is ancient and does not support the latest ROM's. The version of TWRP should work fine, as should the latest OpenRecovery (2.09 IIRC).
Sideload worked perfectly! Thank you so much!
cm11 working only TWRP here , with cwm appears same error
mmichaelalves said:
cm11 working only TWRP here , with cwm appears same error
Click to expand...
Click to collapse
Did you not read my post?
arrrghhh said:
Either way, CWM for our device is ancient and does not support the latest ROM's. The version of TWRP should work fine, as should the latest OpenRecovery (2.09 IIRC).
Click to expand...
Click to collapse
Hi,
Just for you to know:
Model: r7plusf
Recovery: TWRP 3.0.2-0
----------------------------------------
So earlier today I did an OTA update (cm-14.1-20161205-NIGHTLY-r7plus.zip), but couldn't get my phone to boot.
So naturally, I tried wiping Cache and ART cache, but was still bootlooping.
Thought there might be someting wrong with my ROM and data, so I formated data and Installed ROM and GAPPS again after ADB pushing them onto my phone.
Now, and although CM14.1 and GAPPS are successfully installed on my Oppo R7 Plus, I can't boot into the OS. Every time I try reboot system, whether through POWER_BUTTON, RECOVERY or ADB, I just boot into Recovery.
Worst of all, for some unknown reason, I can't get into BOOTLOADER, neither through button combination, nor through Recovery nor ADB.
I found this article (http://forum.xda-developers.com/tmobile-lg-g3/general/fix-recovery-loop-twrp-computer-t2873386) in the LG G3 thread about executing some shell commands, but I haven't tested testing it with my phone's variables because it might hard brick it...
Please Help!
[EDIT] I now have access to fastboot but still recovery looping like crazy.
I installed the same update via CyanDelta , worked like a charm ! hopefully you get back up and running.
[UPDATE] strangely I tried to flash stock recovery and boot CM13 and it worked!
Will try to flash twrp again and insall CM14
keep you up to date
Same thing happened to me! Where did you get a copy of the stock recovery? Link?
resverse said:
[UPDATE] strangely I tried to flash stock recovery and boot CM13 and it worked!
Will try to flash twrp again and insall CM14
keep you up to date
Click to expand...
Click to collapse
I had the same problem. Can't remember exactly how I resolved it. But I think, I use CM recovery to flash nightly. Then flash TWRP to flash gapps. For some strange reason, using CM recovery also show no enough disk space whenever I try to flash opengapps. But TWRP recovery can flash opengapps successfully.
Don't use the OTA, use adb sideload to flash the nightly next time. So far, adb sideload has not given me any issue to flash nightly.
Same problem...
I tried a lot of things nothing works and now I've installed the cm recovery but I have the "unauthorized phone" in terminal when I try to flash the ROM... I can do nothing because I can't enable the usb debugging. I don't know what to do.
If somebody can help I appreciate.
corbalan12 said:
Same problem...
I tried a lot of things nothing works and now I've installed the cm recovery but I have the "unauthorized phone" in terminal when I try to flash the ROM... I can do nothing because I can't enable the usb debugging. I don't know what to do.
If somebody can help I appreciate.
Click to expand...
Click to collapse
Since then I found how to fix it :
first of all I flashed cm13 through TWRP,
Then I flashed the stock recovery (Google it, I found it in OPPO forums) with fastboot,
After that I did a factory reset in the stock recovery,
Booted cm13 with stock recovery,
Then re-flashed TWRP,
From TWRP, I wiped both data and system partitions,
Then fresh installed cm14 and Gapps
And it worked!
Not sure if those are the exact steps I followed because all I did was a hole lot of messing around and trying absurd things out, but think this is how I fixed it.
Let me know if it worked for you or if you still can't fix your problem
Best of luck
Resverse
resverse said:
Since then I found how to fix it :
first of all I flashed cm13 through TWRP,
Then I flashed the stock recovery (Google it, I found it in OPPO forums) with fastboot,
After that I did a factory reset in the stock recovery,
Booted cm13 with stock recovery,
Then re-flashed TWRP,
From TWRP, I wiped both data and system partitions,
Then fresh installed cm14 and Gapps
And it worked!
Not sure if those are the exact steps I followed because all I did was a hole lot of messing around and trying absurd things out, but think this is how I fixed it.
Let me know if it worked for you or if you still can't fix your problem
Best of luck
Resverse
Click to expand...
Click to collapse
Thank you very much!!!! I'll try tomorrow and tell you.
I appreciate a lot!
First of all now works but to be honest, I don't know if the way I fix makes sense or if is correct but not for the same reason I do but I'll try to explain...
I had cm-14.1-20161218-NIGHTLY and I tried to update via OTA to 20161220 the phone reboot and I get the bootloop. The first I thought, install again the ROM making wipe data and blabla... nothing work.
I tried to "reflash" the recovery, nothing. Flashed cm recovery, it always gave me error trying to flash the rom. I tried to install with stock recovery, errors too.
I was reading hundred of post looking for my issues, device unauthorized, "error 7" in twrp... I was crazy.
At last I thought, I've been trying to install from SDcard, if I try to install from internal memory? and I install again the twrp to transfer the ROM and Gapps to the internal memory and... it worked!!!!
Long story but with happy ending.
Thank you for your help I appreciate and sorry for my english.First of all now works but to be honest, I don't know if the way I fix makes sense or if is correct but not for the same reason I do but I'll try to explain...
I had cm-14.1-20161218-NIGHTLY and I tried to update via OTA to 20161220 the phone reboot and I get the bootloop. The first I thought, install again the ROM making wipe data and blabla... nothing work.
I tried to "reflash" the recovery, nothing. Flashed cm recovery, it always gave me error trying to flash the rom. I tried to install with stock recovery, errors too.
I was reading hundred of post looking for my issues, device unauthorized, "error 7" in twrp... I was crazy.
At last I thought, I've been trying to install from SDcard, if I try to install from internal memory? and I install again the twrp to transfer the ROM and Gapps to the internal memory and... it worked!!!!
Long story but with happy ending.
Thank you for your help I appreciate and sorry for my english.