Database Info

[Kernel] ardatdat kernel v1.6 released [CWM] (2012-04-26)

First, thanks all testers that have contributed a lot in testing the v1.6 beta kernel. Without your valuable feedback, v1.6 release will not be here.
Let me introduce the features of "The New Kernel" v1.6
1. Generally, smoother than all the previous versions (feedback from most of the beta testers)
2. Stabilized the voltage & frequency setting such that the 'stock' voltage is used without affecting OC stability.
3. As different machine's CPUs are different, OC to 1.35Ghz is not the most stable setting. Instead, 1.3Ghz will be the max.
4. Remove some of the useless codes used in v1.5
5. Re-base the whole kernel source from official XWLA4 kernel
6. Add in support to read NTFS & CIFS file system
7. Switch to use the SLUB allocator
8. Fine tune the brightness control (brightness changes smoother than v1.5)
9. Disable ipv6 (unless I am told to add it back)
10. Keep the feature of measuring correct 3g/wifi data counter
11. Makefile optimization
12. Other minor bug fixes
Special thanks to: CyanogenMod, intersectRaven, pershoot, faux123 for their kernels and references.
Download link
==========
Updated: 2012-04-26
Version: 1.6
Flash method: CWM Recovery
File: ardatdat_9103_kernel_v1.6.zip
Link: http://www.mediafire.com/?mbhkoo480r1n05t
Mirror (115): http://115.com/file/dpu17w7b#ardatdat-9103-kernel-v1.6.zip
MD5: 87EFA3E25E1AB17ADA9AAD650297E8C1
Finally, flashing any kernels or ROMs have risks! Flash at your own risk! You have been warned!
Previous Version
============
You can refer this post for the previous version: http://forum.xda-developers.com/showthread.php?t=1418895

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

Thanks ardatdat fir ur great kernel i am using on my glx r rom and it works great. Thanks
Sent from my GT-I9103 using XDA

ardatdat if possible can you include/make a BLN MOD for Galaxy R ?

'cooleagle' said:
ardatdat if possible can you include/make a BLN MOD for Galaxy R ?
Click to expand...
Click to collapse
I have been studying on how to do that...(long time ago)
Still cannot find a way to patch the source code. Any one get any ideas?

thanx man...
goin to install !!

ardatdat said:
I have been studying on how to do that...(long time ago)
Still cannot find a way to patch the source code. Any one get any ideas?
Click to expand...
Click to collapse
Maybe you could request the devs in the S2 forum to help as they have a working MOD for S2.
I can myself ask them but I won't understand a thing about what they'll suggest to modify, so it'll be better if you ask them directly.

thanks :thumbup: works great,
just flashed, got 3603 on quadrant
is there any way to improve gpu performance?

U R the man
BIG
THANKS

downloading!

ardatdat big thanks. Its my result:

thanks ardatdat! I am using your kernel v1.5, now it can update to v1.6
Sent from my GT-I9103 using XDA

Thanks ardatdat.
Sent from my GT-I9103 using XDA

After flashing quality of sound output in headphones is decreased, with 1.5 sound quality was pretty good.
Sent from my GT-I9103 using Tapatalk 2

Dear Sir
I had already flash your new 1.6 kernel
I have connect with my NTFS externel hard disk(the hard disk also connect another usb port for power) on OTG,
but the Galaxy R show can't open it,
then I try to connect FAT drive,
it work fine on FAT drive

king901412 said:
Dear Sir
I had already flash your new 1.6 kernel
I have connect with my NTFS externel hard disk(the hard disk also connect another usb port for power) on OTG,
but the Galaxy R show can't open it,
then I try to connect FAT drive,
it work fine on FAT drive
Click to expand...
Click to collapse
same here... i connected my NTFS formatted pen drive but it says "unsupported or empty " ...
any special things required to be done before we can use the NTFS on OTG ??

Great man..... good job

Testing it since last night. Seems very responsive and quick compared to 1.5.
Not sure if I should thank you for 1.6 or critique you for 1.5!
Many thanks!

Many Thanks Ardatdat, will test it as soon as I get my SGR back.

thanks................ a lot
great work keep itup..............

★ ☆ [Kernel][4.3] NuK3RN3L | Sense 5.5 | S2W+S2S | Butterfly_x920d 1.0 [01-22-14] ☆ ★

★ ☆ [Kernel][4.3] NuK3RN3L | Sense 5.5 | S2W+S2S | Butterfly_x920d 1.0 [01-22-14] ☆ ★
-NuK3RN3L-
Sense 5.5
Android 4.3
dlX_u Edition
v.1.0
For the HTC Butterfly
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I DO NOT OWN THIS DEVICE
Kernel is currently untested, flash at your own risk!
This is a port of my HTC m7 and dlx NuK3rn3l.
If this works out for everyone, I may turn this over to kairi_zeroblade who initially contacted me about sweep 2 wake functionality.
Please let me know asap if this boots, works ok, etc,..
If not, I will pull it.
NuK3rn3l Features:
Will be adding to this list soon.
sweep2wake
sweep2sleep
multicore power saving
thermal throttling
more to come...
Governors:
msm-dcvs
badass
dancedance
lagfree
smartmax
wheatley
userspace
powersave
lionheart
ondemand
performance
Schedulers:
noop
deadline
cfq
sio
zen
GPU Governors:
performance
ondemand
simple
interactive
Credits:
Zarboz - For all he has done! Too much to list...
VinylFreak89 - For his help fixing In call audio
Ziggy - Who helped me make my first kernels, long ago
tbalden - some cpu sources
faux123 - sound control(not fully implemented yet)
jthatch12 - some code bits
flar2 - some code bits
HTC - Original m7 source
kairi_zeroblade - contacting me re: dlx_u
My apologies to other kernel devs, my Git etiquite is pretty bad...
When I have more time, I will work on that.
DOWNLOADS:
-NuK3RN3L-
v.1.0 dlX_x920d
Pulled link for now, will try again tomorrow.
If you are interested in testing, please PM me, could save some time.
I would like to get you guys working s2w like I did for 4.3/5.5 on the Dna.
THIS IS NOT YET TESTED!
I DO NOT OWN THIS DEVICE!
Make sure you have a backup and/or another kernel handy in case, you have been warned!
Wanna buy me a coffee to keep me going?
CLICK HERE
​

Just in case...

I am testing.
Thanks for this kernel.

bluheart said:
I am testing.
Thanks for this kernel.
Click to expand...
Click to collapse
You're welcome.
Can I assume that it did boot then?
I would think it would, just have not had any feedback as of yet on that.
Thanks for testing it out. :good:

santod040 said:
Can I assume that it did boot then?
I would think it would, just have not had any feedback as of yet on that.
Thanks for testing it out. :good:
Click to expand...
Click to collapse
Sorry to confirm that it can not pass booting-image. My phone is s-off, 4.3 and sense 5.5.
am waiting for any kernnel with s2w function. :crying::crying::crying:

vithudu said:
Sorry to confirm that it can not pass booting-image. My phone is s-off, 4.3 and sense 5.5.
am waiting for any kernnel with s2w function. :crying::crying::crying:
Click to expand...
Click to collapse
Ok, sorry about that. I am trying for you guys.
I pulled the link for now, will try again tomorrow.
If you or anyone else are interested in testing, please PM me, could save us some time.
I would like to get you guys working s2w like I did for 4.3/5.5 on the Dna.

santod040 said:
Ok, sorry about that. I am trying for you guys.
I pulled the link for now, will try again tomorrow.
If you or anyone else are interested in testing, please PM me, could save us some time.
I would like to get you guys working s2w like I did for 4.3/5.5 on the Dna.
Click to expand...
Click to collapse
@santod
thanks!!i do need the s2w port..also if i can find interesting stuff will let you know..also i will keep my github updated..

@santod040 thanks for the kernel...I would love to test the kernel..I will wait for you to reupload the link...
Thanks for your interest in our device..Looking forward for your continued support...

Oh was that the kernel, I thought it was due to my ROM!
Waiting for the updated version.

Have you tested this kernel?
bluheart said:
Oh was that the kernel, I thought it was due to my ROM!
Waiting for the updated version.
Click to expand...
Click to collapse
And anyone is tested this kernel?

We should wait for the update as the kernel is not booting.

Any improvement?
Sent from my HTC Butterfly using xda premium

[KERNEL] [SM-G355H] [CM11] Phoenix Kernel

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
PHOENIX KERNEL
FOR G355H​
Features
Governors: Lionfish, Smartassv2, BrazilianWax
I/O Schedulers: FIOPS, SIO, CFQ, BFQ
Battery Life Extender (BLX)
KSM Enabled
Toolchain: Built With GCC 4.8 Toolchain from Linaro (Since 05-17-2016 build now is compiled with Uber 4.9)
Click to expand...
Click to collapse
Special Thanks
Chijure (For be my mentor)
Y300-0100 (For his great job with CM11 and the base kernel)
Requirements
TWRP Recovery
Put your warranty papers on the trash
A working brain
INSTRUCTIONS
Copy the boot.img or the zip to the SD Card
Boot in to TWRP Recovery
Flash the zip or the Boot.img (Wich do you prefer)
Wipe Cache from recovery
Reboot
Enjoy!
Source: Github
DOWNLOADS​ZIP​
BOOT.IMG​
Do you like my kernel? Smash the thanks button!
Team Phoenix Fan Page
Note​This kernel is in early development, if there are any bug or if you want to add a feature just say it, don't be affraid
Click to expand...
Click to collapse

Changelog
05/18/2016​
Used stock boot.img as a base
Wifi fixed
Click to expand...
Click to collapse
05/17/2016​
Changed defconfig to cyanogen_sa_defconfig
Changed toolchain to Uber 4.9
Should boot now
Click to expand...
Click to collapse
05/15/2016​
Initial Release
Click to expand...
Click to collapse

@buenajuan300 Going to test it in SM-G355M

FedericoPeranzi said:
@buenajuan300 Going to test it in SM-G355M
Click to expand...
Click to collapse
@buenajuan300 Not working on SM-G355M

RTFM
First. Dummy file (zImage)
Second. Read the F Manual, this is for G355H

buenajuan300 said:
First. Dummy file (zImage)
Second. Read the F Manual, this is for G355H
Click to expand...
Click to collapse
If you don't know the H kernel and the M kernel are the same, I flash H kernel for M many times and works fine, so you have to read :good:

If you say so...

Updated, try now

Very good bro

@buenajuan300 Now works on SM-G355M and the wifi works too, thanks

Installed kernel in my G355M, however, has a problem. When I installed and I boot, the restarted and the lock screen device appeared that the android.phone process stopped, and it is only that. Would you help me? I am using the CM11 the G355H

I read cyanogen_sa_defconfig from that can you make proper credit? I add new I/O scheduler (FIOPS and BFQ) and Y300-0100 fix wifi. @buenajuan300

I know, i fixed the WiFi by just using a stock boot.img, nothing related wirh Y300 and the cyanogenmod_sa_defconfig is related with Y300, thanks, im going to give credits to him un a moment

does otg works in this kernel

Dhruvit Pokharna said:
does otg works in this kernel
Click to expand...
Click to collapse
OTG depend on software and hardware not only software (kernel) .

can you help build a kernel based from cm 11 by sir ih24n?

Please add these following features to kernel:
* ext4 extSdCard support
* swap support
* wifi monitor mode
* chroot support
* USB OTG support

ThisIsCr34T1v3 said:
Installed kernel in my G355M, however, has a problem. When I installed and I boot, the restarted and the lock screen device appeared that the android.phone process stopped, and it is only that. Would you help me? I am using the CM11 the G355H
Click to expand...
Click to collapse
Same problem here.
Sent from my SM-G355H using XDA-Developers mobile app

Try to delete the cache and reply if it works

buenajuan300 said:
Try to delete the cache and reply if it works
Click to expand...
Click to collapse
It still don't

[KERNEL][CM13-Kumajaya] Xceed [Libra]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SOURCE | CREDITS | DISCLAIMER | DOWNLOADS | FEATURES | FAQ​
**Snapdragon™ is a registered trademark owned by Qualcomm Technologies Inc.
**Synapse™ is a registered trademark owned by @Andreilux
**(v1)Xceed Logo™ is created by @fareed_extreme
**(v2)Xceed Logo™ is created by @Sharan Narayan
**(v3)Xceed Logo™ is created by @JeGuina
XDA:DevDB Information
Xceed Custom Kernel, Kernel for the Xiaomi Mi 4C
Contributors
kairi_zeroblade
Source Code: https://github.com/zeroblade1984/android_kernel_xiaomi_msm8992
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: Production build 1
Stable Release Date: 2016-12-04
Created 2016-12-04
Last Updated 2016-12-07

Downloads
Downloads: Libra
Mirror: Libra
This is based on the 11-09 build from Kumajaya..as its the last stable/working build before things went haywire..so I advise you to use that build or any build earlier than that..
Now, why boot.img format?? its because I made some changes on the ramdisk

Reserved

Download and disclaimer link in the first post point to your LG kernel.
Also, first download link in the second post gets me to a login page, but this https://www.androidfilehost.com/?fid=385035244224403388 works fine.
Could I test the kernel on the CM13 made by TeamSuperluminal?

what is the feature?

could i flash it on miui 8? or its only for cm based kumajaya?

I use it for a long time on my LG G2 and so great kernel.

what's the feature of this kernel?

akiralee said:
what is the feature?
Click to expand...
Click to collapse
Little cores are overclocked to 1.5Ghz, big cores to 1.9Ghz, and some bug fixes added.
Kernel should pretty much be faster and more battery friendly than @ketut.kumajaya 's one.

Cozzmy13 said:
Download and disclaimer link in the first post point to your LG kernel.
Also, first download link in the second post gets me to a login page, but this https://www.androidfilehost.com/?fid=385035244224403388 works fine.
Could I test the kernel on the CM13 made by TeamSuperluminal?
Click to expand...
Click to collapse
I do have something we all call "Real Life"..so in my "FREE" time I will finish the OP..
backgamons said:
could i flash it on miui 8? or its only for cm based kumajaya?
Click to expand...
Click to collapse
For now, just CM based on kumajaya's repo's..I am planning on a MIUI kernel already..
reddsmokee said:
I use it for a long time on my LG G2 and so great kernel.
Click to expand...
Click to collapse
Thank you very much, I do hope to not disappoint you here on Mi 4c..
akiralee said:
what is the feature?
Click to expand...
Click to collapse
rackzel0415 said:
what's the feature of this kernel?
Click to expand...
Click to collapse
My projects has always been kept simple and straightforward..no excessive features, nor any buzzwords included..
Cozzmy13 said:
Little cores are overclocked to 1.5Ghz, big cores to 1.9Ghz, and some bug fixes added.
Kernel should pretty much be faster and more battery friendly than @ketut.kumajaya 's one.
Click to expand...
Click to collapse
You shouldn't be addressing the original kernel author like that..all thanks to @ketut.kumajaya for the ground work for Libra..
Again, Guys..I do not plan to add tonloads of governors, features or any bling on this project..I just want a worry free device you can always count and enjoy.. :good:

kairi_zeroblade said:
You shouldn't be addressing the original kernel author like that..all thanks to @ketut.kumajaya for the ground work for Libra..
Click to expand...
Click to collapse
I didn't mean to address him in any way, I just said that yours could be better.

Can't wait for MIUI kernel ! Keep up the good work

Waiting for miui kernel!!thanks a lot for your work!!

Waiting custom kernel for miui. ? and thank you dev. This kernel is good for battery and performance.

can i use it in aosp rom/slim 6 ???

Tried flashing the kernel on Team Superluminal CM13.1, phone boots pretty fast, but trying to unlock the device using pin code results in black screen and device going back to the unlock screen eventually.
Kernel compiled using @ketut.kumajaya 's sources didn't do this.
I also tried compiling his kernel and adding your commits, and besides a very slow boot, it didn't do this either.
I didn't get a logcat, but will do tomorrow.
---------- Post added at 05:12 PM ---------- Previous post was at 05:10 PM ----------
likhon02 said:
can i use it in aosp rom/slim 6 ???
Click to expand...
Click to collapse
It should work on Slim6, I don't know about AOSP.

For now, just CM based on kumajaya's repo's..I am planning on a MIUI kernel already..
Thanks for your work and waiting next update for miui rom :fingers-crossed:

I got bootlooped after I flashed the kernel. Im using custom rom called mokee.

Clean flashed the kernel with Emfox's 09/11 build..
Wow! I'm impressed, very fast, smooth & responsive
Can't comment yet bout the battery life though coz i just flashed it last night.
Thx for sharing this mate..Cheers
Sent from my Mi-4c using Tapatalk

Hey man, I think I remember using Xceed kernel on my HTC One m7. Nice to see you here. Looking forward to the MIUI version of your kernel.
Sent from my Mi-4c using Tapatalk

[Kernel][March]FrankenKernel[P4][4.14.172]

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
FRANKENKERNEL
Franken is a rom and kernel project from all the best projects out for our pixel 4..Its a combo of bits,patches and merges from all the great source provided by the many great developers around the community! A special thanks to unicornblood for its base used in this ver of franken!
Upstream and google based builds!
Features
-Adreno Boost
-wake gestures-flar
-Kcal
-tripndroid io
-maple io
-Advanced tcp (sociopath)(argilesd)
-reworked boost
-hbm
-backlight dim
-wakelock blocker
-many more check github
Flashing
fk kernel manager has been the only place i flashed but im sure there is other methods ak3 will retain root!
If coming from another kernel it's always best to flash stock kernel then Franken!!
Im not responsible if you blow up or turn your p4 into a hand warmer.Flash at your own risk!
Downloads
[url]https://lab.dirtyrom.com/p4/[/URL]
Telegram
[url]https://t.me/frankenRom[/URL]
Donations
[url]https://paypal.me/FrankenKernel?locale.x=en_US[/URL]
Thanks
josh (du) base
freak
despair dev
Flar
XDA:DevDB Information
FrankenKernel, Kernel for the Google Pixel 4 XL
Contributors
dabug123
Source Code: [url]https://github.com/Dabug123/Pixel4[/URL]
Kernel Special Features:
Version Information
Status: Stable
Current Stable Version: QU5
Stable Release Date: 2019-11-04
Created 2019-11-03
Last Updated 2019-11-03

saved for me
Upstream is QU
Regular google RQ

8.5 beta
Downloads
https://lab.dirtyrom.com/p4/FrankenKernel.Beta8.5.zip

Awesome my friend! Thanks for the new kernel! ???

Cool to see a new kernel, does the kernel have wiregaurd ?

matlear said:
Cool to see a new kernel, does the kernel have wiregaurd ?
Click to expand...
Click to collapse
i havnt added yet but will in coming builds over next few days!

update beta9
changelog
Sultan test stuff
-msm: kgsl: Don't try to wait for fences that have been signaled
-msm: kgsl: Don't allocate memory dynamically for drawobj sync structs
-msm: kgsl: Avoid dynamically allocating small command buffers
Downloads
https://lab.dirtyrom.com/p4/FrankenKernel.Beta9.zip

What is FK kernel manager? All is I see Franco Kernel manager when I type that it and when I install that it just closes automatically. So what should I be using?
Thanks,

aaronc_98 said:
What is FK kernel manager? All is I see Franco Kernel manager when I type that it and when I install that it just closes automatically. So what should I be using?
Thanks,
Click to expand...
Click to collapse
franco kernel manager u need to root first

dabug123 said:
franco kernel manager u need to root first
Click to expand...
Click to collapse
I am rooted it just instantly closes after it asked for permission for root

aaronc_98 said:
I am rooted it just instantly closes after it asked for permission for root
Click to expand...
Click to collapse
no clue there try exkm it has a flasher or make sure fk is checked in mag apk

aaronc_98 said:
I am rooted it just instantly closes after it asked for permission for root
Click to expand...
Click to collapse
I had this, too, but the latest update fixed this issue for me:good:

aaronc_98 said:
I am rooted it just instantly closes after it asked for permission for root
Click to expand...
Click to collapse
frao kernel manager had released an update yesterday which made it crash on my pixel 4, later the night i got another update which fixed it, just wait for a newer apk

How much Boost do we get with hbm?

LukLak19 said:
How much Boost do we get with hbm?
Click to expand...
Click to collapse
HBM maxes out display brightness as much as possible in any given condition.

wrongway213 said:
HBM maxes out display brightness as much as possible in any given condition.
Click to expand...
Click to collapse
This ..It uses as much or more than the display is allowed!

LukLak19 said:
How much Boost do we get with hbm?
Click to expand...
Click to collapse
If memory serves (always questionable) when Flar2 came up with his HBM back in the 6p days, it would add approximately 50-60 nits. Not a lot, but definitely noticeable, and helpful in bright sunlight :good:

try beta 5
I think it's the sweet spot
It's back little in history
download
https://lab.dirtyrom.com/p4/FrankenKernel.Beta5.zip

Ya already can tell much better definitely try beta 5

dabug123 said:
try beta 5
I think it's the sweet spot
It's back little in history
download
http://https://lab.dirtyrom.com/p4/FrankenKernel.Beta5.zip
Click to expand...
Click to collapse
The Link you posted was bad - but if you cut out the duplicate http://https:// and just copy the URL from the first word "Lab" thru to the end ".zip"" then the file downloads. You might want to clean it up in your post for others who want to download. Thanks for your work!