Okay , so as the topic says .. I am facing problem while flashing cm11 build #5 by cooldevelopment for the non-NFC version of the Samsung galaxy s2 plus i9105 . I have rooted (my friend's ) phone by first installing cwm by chotu222 via Odin , unchecking f.reset time and auto reboot and flashing it via pda and selecting it . while it was flashing , I waited for the " reset " blue tag in odin to turn "pass" green tag and only then I unplugged it and booted into recovery mode while in the download mode. I was rewarded with cwm instead of the phone's default android recovery . I proceeded and flashed the SuperSU file from the cwm recovery and rebooted . I was successful in my attempt of rooting my friend's android . I updated the binaries and set up my traditional settings in the root app ( always granting permissions to apps and changing the emblem etc . ) I had downloaded the cm11 .zip and had transferred it to the sd card .. I booted the phone into recovery mode . I was over confident that the flashing process would anyhow be successful and I ( it was a huge mistake ) without backing up my stock rooted rom , wiped everything and tried to flash the rom . After wiping Everything , i tried to flash the rom and it " aborted the installation " I repeated the whole process again to gain the same result . my friend had a bricked s2 plus for the whole night . I flashed the stock 4.2.2 rom via odin and the device is fine now . I too own a device ( samsung galaxy s2 i9100) and as per my knowledge , ( if i am not wrong ) , kit kat roms requires cwm recovery version to be v6.0.4.5 or higher and i was not ( i think i was on cwm v6.0.3.x ) . any idea ? was it a bad download after all ? Do I need to flash a custom kernel before flashing the rom to avoid the superbrick bug in the stock kernel ? Please help me and thanks a lot for your time :good:
P.S. My friend's phone was on 4.2.2 bootloader before rooting and installing the custom cwm recovery .
I hope I am clear enough and elaborated enough so that you all can help me out .
flasherruts said:
Okay , so as the topic says .. I am facing problem while flashing cm11 build #5 by cooldevelopment for the non-NFC version of the Samsung galaxy s2 plus i9105 . I have rooted (my friend's ) phone by first installing cwm by chotu222 via Odin , unchecking f.reset time and auto reboot and flashing it via pda and selecting it . while it was flashing , I waited for the " reset " blue tag in odin to turn "pass" green tag and only then I unplugged it and booted into recovery mode while in the download mode. I was rewarded with cwm instead of the phone's default android recovery . I proceeded and flashed the SuperSU file from the cwm recovery and rebooted . I was successful in my attempt of rooting my friend's android . I updated the binaries and set up my traditional settings in the root app ( always granting permissions to apps and changing the emblem etc . ) I had downloaded the cm11 .zip and had transferred it to the sd card .. I booted the phone into recovery mode . I was over confident that the flashing process would anyhow be successful and I ( it was a huge mistake ) without backing up my stock rooted rom , wiped everything and tried to flash the rom . After wiping Everything , i tried to flash the rom and it " aborted the installation " I repeated the whole process again to gain the same result . my friend had a bricked s2 plus for the whole night . I flashed the stock 4.2.2 rom via odin and the device is fine now . I too own a device ( samsung galaxy s2 i9100) and as per my knowledge , ( if i am not wrong ) , kit kat roms requires cwm recovery version to be v6.0.4.5 or higher and i was not ( i think i was on cwm v6.0.3.x ) . any idea ? was it a bad download after all ? Do I need to flash a custom kernel before flashing the rom to avoid the superbrick bug in the stock kernel ? Please help me and thanks a lot for your time :good:
P.S. My friend's phone was on 4.2.2 bootloader before rooting and installing the custom cwm recovery .
I hope I am clear enough and elaborated enough so that you all can help me out .
Click to expand...
Click to collapse
Flash CWM 6.0.4.5 and redownload CM11 and try to flash it again does it give a status error?
thanks for the quick reply .. already downloaded the rom ..
flasherruts said:
thanks for the quick reply .. already downloaded the rom ..
Click to expand...
Click to collapse
yeah but it could be a bad download
do you have a 'Status" error? can you tell me what kind of status error?
i guess it was status 7 ( installation aborted ) which I suppose is because of either a bad download or cwm not meeting the recovery requirements . Thanks though
flasherruts said:
i guess it was status 7 ( installation aborted ) which I suppose is because of either a bad download or cwm not meeting the recovery requirements . Thanks though
Click to expand...
Click to collapse
yeah be sure you have cwm 6.0.4.5 for your device than it should flash without any problem if not ask me or anyone else here
yes .. that was really noobish of me ..i have been flashing kk roms on my device from 3 months nowand i should have had the presence of mind .. nvm .. i flashed 6.0.4.5 and the rom and it flashed .. thanks
Related
using , heimdall i installed clockworkmod recovery 6.0.2.7 and did the back up ,
then i installed cyanogen mod 10.1 , and i did not like it , i tried to restore my device , but clockwork mode recovery is not restoring the device .
no matter what i did , it simply does restore my tab , i read many forum articles , but none helped . So any idea how can i restore my device ?
i tried to find stock rom but cannot find link from where i can download easily and fast , hotfile is too slow for the purposes ,
and there is no other link to download stock rom .
any help will be appriciated .
horizonrays said:
using , heimdall i installed clockworkmod recovery 6.0.2.7 and did the back up ,
then i installed cyanogen mod 10.1 , and i did not like it , i tried to restore my device , but clockwork mode recovery is not restoring the device .
no matter what i did , it simply does restore my tab , i read many forum articles , but none helped . So any idea how can i restore my device ?
i tried to find stock rom but cannot find link from where i can download easily and fast , hotfile is too slow for the purposes ,
and there is no other link to download stock rom .
any help will be appriciated .
Click to expand...
Click to collapse
Easiest way to restore to stock is below,
Go to http://www.sammobile.com and download p3100's firmware based on your country.
Download Odin and using Odin Flash the downloaded firmware.
Use Cf-auto-root to root. And use Triangle Away if you like to rest flash counter.
If you need explanation for any of the steps, reply here. One of us can help you.
DEVICE : SAMSUNG GALAXY FIT GT S5670
CURRENT ROM : GB 2.3.6 STOCK
I rooted my device a long time ago..but flashed the recovery few days ago only.
So here's what happened?
i flashed "AMON-RA RECOVERY"..then found it to be old.
then tried to flash the "TJ-STYLE RECOVERY" ...BUT SOMEHOW IT DIDN'T WORKED and ODIN was taking very much time.
so aborted and then flashed "PRATYUSH.CREED 'S RECOVERY"... as mentioned in the guide in the forum that this could backup the STOCK ROM.
THEN as mentioned in the guide i took a NANDROID BACKUP of the stock rom ...(didn't knew the backup was successful or not)..
after creating the backup i tried to flash OFFICIAL CYNOGEN MOD 7.2.0 NIGHTLY.ZIP but the process ended very quickly notifying of successfull flashing...
instead when i rebooted after showing the sumsung animation the Device got hungup at a black screen with android written on it at a little right.
then i tried to restore the NANDROID BACKUP...but the recovery showed MD5 ERROR..
I thought may be a unlocked BOOTLOADER is required ..i googled it but couldn't find the procedure...
i then downloaded and flashed a STOCK_GB_2.3.6.tar.md5 rom..
this worked BUT REPLACED THE CLOCKWORKMOD RECOVERY WITH STOCK RECOVERY
.
.
.
NOW THE QUESTIONS :
1.why wasn't the NANDROID BACKUP successful ?
2.why didn't the OFFICIAL CYNOGEN MOD 7.2.0 worked ?
3.how can i unlock the BOOT LOADER if it is required for the CUSTOM ROMS ?
4.why the CUSTOM CLOCKWORK MOD got replaced by the STOCK RECOVERY on reflashing with stock rom ?
help me ...
AWAITING REPLIES.:fingers-crossed:
Hy there
qapl said:
DEVICE : SAMSUNG GALAXY FIT GT S5670
CURRENT ROM : GB 2.3.6 STOCK
I rooted my device a long time ago..but flashed the recovery few days ago only.
So here's what happened?
i flashed "AMON-RA RECOVERY"..then found it to be old.
then tried to flash the "TJ-STYLE RECOVERY" ...BUT SOMEHOW IT DIDN'T WORKED and ODIN was taking very much time.
so aborted and then flashed "PRATYUSH.CREED 'S RECOVERY"... as mentioned in the guide in the forum that this could backup the STOCK ROM.
THEN as mentioned in the guide i took a NANDROID BACKUP of the stock rom ...(didn't knew the backup was successful or not)..
after creating the backup i tried to flash OFFICIAL CYNOGEN MOD 7.2.0 NIGHTLY.ZIP but the process ended very quickly notifying of successfull flashing...
instead when i rebooted after showing the sumsung animation the Device got hungup at a black screen with android written on it at a little right.
then i tried to restore the NANDROID BACKUP...but the recovery showed MD5 ERROR..
I thought may be a unlocked BOOTLOADER is required ..i googled it but couldn't find the procedure...
i then downloaded and flashed a STOCK_GB_2.3.6.tar.md5 rom..
this worked BUT REPLACED THE CLOCKWORKMOD RECOVERY WITH STOCK RECOVERY
.
.
.
NOW THE QUESTIONS :
1.why wasn't the NANDROID BACKUP successful ?
2.why didn't the OFFICIAL CYNOGEN MOD 7.2.0 worked ?
3.how can i unlock the BOOT LOADER if it is required for the CUSTOM ROMS ?
4.why the CUSTOM CLOCKWORK MOD got replaced by the STOCK RECOVERY on reflashing with stock rom ?
help me ...
AWAITING REPLIES.:fingers-crossed:
Click to expand...
Click to collapse
i m a complete noob, but i will try to help u as much as possible ...
i think,there was a prob with flashing of custom recovery,
i m also on custom recovery (dunno which one) i flashed it as flashable zip frm recovery {i think i installed tj style fr odin then flashed the present recovery }
Also, wen u flash stock rom, u need to root it again ..
nondroid problem? mayb due to recovery problem ..
bootloader thing? sorry i dont knw anything bootloader thing ...
If i were u, i will first install tj style recovery from odin(it roots ur phone too, so no need to root it first) then either use it(its said to b most stable recovery around) or flash another recovery as flashable zip frm the present recovery ...
(i will avoid using odin fr each nd every thing ...)
Hope this helps ^^
hi..
anu.cool said:
i m a complete noob, but i will try to help u as much as possible ...
i think,there was a prob with flashing of custom recovery,
i m also on custom recovery (dunno which one) i flashed it as flashable zip frm recovery {i think i installed tj style fr odin then flashed the present recovery }
Also, wen u flash stock rom, u need to root it again ..
nondroid problem? mayb due to recovery problem ..
bootloader thing? sorry i dont knw anything bootloader thing ...
If i were u, i will first install tj style recovery from odin(it roots ur phone too, so no need to root it first) then either use it(its said to b most stable recovery around) or flash another recovery as flashable zip frm the present recovery ...
(i will avoid using odin fr each nd every thing ...)
Hope this helps ^^
Click to expand...
Click to collapse
thanks for the reply ...
i didn't knew flashing custom recovery ROOTS THE DEVICE , so if this actually happens thanks for letting me know. ..:good:
and for the recovery i did that already...
so if anyone WILLING TO CLEAR THE DOUBTS..
YOU ARE WELCOME
how..?
anu.cool said:
flash another recovery as flashable zip frm the present recovery ...
(i will avoid using odin fr each nd every thing ...)
^^
Click to expand...
Click to collapse
HOW WOULD I DO THAT..?
means the tj-style recovery i have is in TAR format...
should i UNcompress and recompress it in ZIP format... ?
AND WHAT POSSIBLE DISADVANTAGES COULD BE FOR THE ODIN ?
1) Nandroid Backup works only for custom roms. For stock roms u can only take a backup but u cant restore (there's a recovery by pratyush.creed which does restore too but i didn't try so can't say)
2)Perhaps u didn't flash properly so it went into bootloop. Use CWM by TJ-style only and next time, wipe data, cache and dalvik cache and format /system just as a precautionary step before flashing custom rom.
3)Samsung Phones doesn't have locked bootloaders. So to flash a rom, u can do it easily
4) The stock rom u flash via ODIN contains stock recovery as well.
U cant flash recovery unless u have other custom recovery (well there is a flashable zip for CWM by tjstyle but i dont know whether it can be flashed via stock recovery). The only way u can do is through ODIN. Make sure ODIN is set properly and if u have windows 7, run it as administrator and better reinstall drivers.
..
qapl said:
HOW WOULD I DO THAT..?
means the tj-style recovery i have is in TAR format...
should i UNcompress and recompress it in ZIP format... ?
AND WHAT POSSIBLE DISADVANTAGES COULD BE FOR THE ODIN ?
Click to expand...
Click to collapse
Let me reclarify - u will hv to install tj style via odin, then avoid odin as much as possible ...
Swat4samp clarrified all other things in the previous reply ..
got the most of it..
swat4samp said:
1) Nandroid Backup works only for custom roms. For stock roms u can only take a backup but u cant restore (there's a recovery by pratyush.creed which does restore too but i didn't try so can't say)
2)Perhaps u didn't flash properly so it went into bootloop. Use CWM by TJ-style only and next time, wipe data, cache and dalvik cache and format /system just as a precautionary step before flashing custom rom.
3)Samsung Phones doesn't have locked bootloaders. So to flash a rom, u can do it easily
4) The stock rom u flash via ODIN contains stock recovery as well.
U cant flash recovery unless u have other custom recovery (well there is a flashable zip for CWM by tjstyle but i dont know whether it can be flashed via stock recovery). The only way u can do is through ODIN. Make sure ODIN is set properly and if u have windows 7, run it as administrator and better reinstall drivers.
Click to expand...
Click to collapse
for the 1st point ..i used the PRATYUSH.CREED recovery already..but the backup restore didn't work for me..as i've also written in the 1st post
as for the 2nd point ...i'll try to do it again correctly and as mentioned by you
FOR THE 3rd AND 4 th POINT :good:
.............THANK YOU
hi everybody
first of all thank you guys for your amazing works
I've just got some questions
i've Ace Plus GT-S7500 only
and i read about the CWM 6.0.3.5 here in forum and i installed it using terminal emulator and it works
but now i'm trying to install speedmod 4.4.2 and i did the full wipe before installing .. but it didn't work
I asked some people one of them said that i have to install CWM 6.0.4.5 to install speedmod .. i searched through this forum and i found how to do it .. i did it exactly as they said it was just installing form CWM recovery bit it didn't work also
in the background there is a "dead android man" with a triangle and (!) inside ..
thanks god i could restore the 2.3.6 stock rom ...
can anubody help me please ??
and thanks
AhmeD-Shifflin said:
hi everybody
first of all thank you guys for your amazing works
I've just got some questions
i've Ace Plus GT-S7500 only
and i read about the CWM 6.0.3.5 here in forum and i installed it using terminal emulator and it works
but now i'm trying to install speedmod 4.4.2 and i did the full wipe before installing .. but it didn't work
I asked some people one of them said that i have to install CWM 6.0.4.5 to install speedmod .. i searched through this forum and i found how to do it .. i did it exactly as they said it was just installing form CWM recovery bit it didn't work also
in the background there is a "dead android man" with a triangle and (!) inside ..
thanks god i could restore the 2.3.6 stock rom ...
can anubody help me please ??
and thanks
Click to expand...
Click to collapse
i use cwm 6.0.2.3 and just follow the installation guide in op and all will work except the bug in the list. just read the whole thread of speedmod and you will get an answer:good:
ANDROID-000 said:
i use cwm 6.0.2.3 and just follow the installation guide in op and all will work except the bug in the list. just read the whole thread of speedmod and you will get an answer:good:
Click to expand...
Click to collapse
i did wipe cache,dalvik and factory reset .. and format system .. but it didn't work
also when i tried to flash the CWM 6.0.4.5 it didn't work too
is there another way than using odin ?
AhmeD-Shifflin said:
i did wipe cache,dalvik and factory reset .. and format system .. but it didn't work
also when i tried to flash the CWM 6.0.4.5 it didn't work too
is there another way than using odin ?
Click to expand...
Click to collapse
u mea to say flashin different version of CWM also fails???
u tried flashing twrp?
personal experience i am on 6.0.4 everything is ok..
in Odin flash the cwm ...
i have flashed it with cwm 5.5 and no bugs other than listed in the thread of speedmod..!!
yeah i tried to flash another version of CWM but it didn't work ... Does it make sense i couldn't flash roms or CWM versions because i flash the CWM 6.0.3.5 using terminal emulator ? :\
and I didn't try to flash twrp but if i want to .. how could i overwrite cwm and replace with twrp ?
and if i tried to flash speedmod using odin it's gonna work right ?
but i prefer to stay away from odin because it's dangerous a little for me as a beginner
now i'm trying to install jelly plus rom http://forum.xda-developers.com/showthread.php?t=2649307
it was the same result it didn't work too
there is a guy said that some mobiles can not install roms directly from CWM .. he said that i should install it using odin .. is that true ?
please i need help guys
just flash correct recovery through odin,any cwm version will work,listed in forums for our device,then just wipe data,cache,dalvik and flash the rom,i have done it about 10-20 times now,nothing has ever gone wrong..!!!
just follow the correct steps..!!
Hi Guys
My Phone is Ace Plus GT-S7500
I downloaded a lot of custom roms for my phone
but after flashing any one and its GAPPS
I Got Samsung Logo then white fade ....
i read too much about this problem
I tried to recover boot from my original rom but no change ....
i tried to download alot of roms but the i faced the same problem
i heard that the cause of this Problem is Kernel i Downloaded this one
http://forum.xda-developers.com/showthread.php?t=1770821
and i wanted to flash this rom (Pure Galaxy)
http://forum.xda-developers.com/showthread.php?t=2566113
and here are the steps that i made
1- I flashed CWM V5 using odin
2- Rooted my phone
3- Updated CWM v5 to V6
4- I opened CWM and made factory Reset and cleared Cache & Dalvik Cache
5- Choose the ZIP to install i choose the rom PURE Galaxy
6- Choose the ZIP to install and i choose GAPPS
7- Choose the ZIP to install and i finally choose the custom Kernel that i linked in the first of topic
and my phone started with Android logo the it reboot continuously
what i have to do to made any custom rom working
no rom wants to start
when i didnt make step 7 my phone start at samsung logo then it fade to white
please Help
and sorry for my English
I too had an ace plus and I too flashed pure galaxy. But I never had the need to flash any kernel. Try flashing stock ROM and again try to flash any custom ROM. If it do work it's good but nothing happens try changing your rooting method...
na4co said:
I too had an ace plus and I too flashed pure galaxy. But I never had the need to flash any kernel. Try flashing stock ROM and again try to flash any custom ROM. If it do work it's good but nothing happens try changing your rooting method...
Click to expand...
Click to collapse
if u plz send me your rooting method to try it . my device didn't accept any rom except Inspiration rom .
Trojan-141 said:
if u plz send me your rooting method to try it . my device didn't accept any rom except Inspiration rom .
Click to expand...
Click to collapse
dude u flashed the kernel which was specifically meant to be for gb, not for jellybean, so this bootloop will occur definitely...jus flash stock and everything is fine then go for other roms and dont flash any other kernel.. jus flash the rom and gapps
use twrp recovery and your steps are correct...and use odin 3.7
Hii guyz..
I have TWRP recovery installed on my samsung galaxy core. Earlier made my core look like lumia by changing the boot animation and all the other things like launcher etc... now when i tried emoving the boot animation .. and put a samsung bootanimation.zip in system/media(i have flashed that bootanimation4u.zip so that zips work in boot animation) the phone stuck at bootanimation then i went to recovery and tried wiping cache and dalvik cache and then by fault wiped SYSTEM too .. it resulted to a NO OS INSTALLED message when i tried to reboot ..,
Now my ques is that can i flash Lollicop rom Directly from my phone by install zip from sdcard method .. or should i first try the odin method and flash the stock rom??
will the lollicop custom rom work directly by flashing or does it require any pre-os installed..
PLEASE HELP ... any answers will be greatly appreciated..
i hve just one phone so need it to be urgently repaired...
.
HELP REQUIRED...
It can be fixed easily dont worry..
Vaibh.rox said:
Hii guyz..
I have TWRP recovery installed on my samsung galaxy core. Earlier made my core look like lumia by changing the boot animation and all the other things like launcher etc... now when i tried emoving the boot animation .. and put a samsung bootanimation.zip in system/media(i have flashed that bootanimation4u.zip so that zips work in boot animation) the phone stuck at bootanimation then i went to recovery and tried wiping cache and dalvik cache and then by fault wiped SYSTEM too .. it resulted to a NO OS INSTALLED message when i tried to reboot ..,
Now my ques is that can i flash Lollicop rom Directly from my phone by install zip from sdcard method .. or should i first try the odin method and flash the stock rom??
will the lollicop custom rom work directly by flashing or does it require any pre-os installed..
PLEASE HELP ... any answers will be greatly appreciated..
i hve just one phone so need it to be urgently repaired...
.
HELP REQUIRED...
Click to expand...
Click to collapse
What is ur android version when you wiped ur system ?
Just restore your twrp backup or flash any good custom rom of your device.
Good luck.
DivtheDevil said:
What is ur android version when you wiped ur system ?
Click to expand...
Click to collapse
Its 4.1.2 i wiped it on 10April 2015... By the way flashed a custom rom "Lollicop Rom by VaibhaV" and it worked..
Karthickgandhi said:
Just restore your twrp backup or flash any good custom rom of your device.
Good luck.
Click to expand...
Click to collapse
The problem was that i did not make any backup... It was a mistake...
But thanx a lot ... Flashed a custom rom and it worked... SOLVED.
new version of android
how can I install new version of android on galaxy core?
---------- Post added at 04:36 PM ---------- Previous post was at 04:32 PM ----------
will lollipop work on galaxy core or we will have to use kit kat?
How did u installed twrp rom in your phone.....?
Sent from my GT-I8262 using XDA Free mobile app
Galaxy core is not getting into downloading mode!!
After rooting my i8262 I was flashing TWRP recovery via Odin
during recovery installation, My phone got switched off!!
And now in downloading mode downloading is not getting completed!!
But phone is working fine
What does it mean.... Is recovery is installed in my phone or not!!
What should I do? I have got custom rom, But without getting into recovery mode I could not execute it!!
GUYS PLEASE HELP ME!!
Laksh Middha said:
After rooting my i8262 I was flashing TWRP recovery via Odin
during recovery installation, My phone got switched off!!
And now in downloading mode downloading is not getting completed!!
But phone is working fine
What does it mean.... Is recovery is installed in my phone or not!!
What should I do? I have got custom rom, But without getting into recovery mode I could not execute it!!
GUYS PLEASE HELP ME!!
Click to expand...
Click to collapse
You can try reinstall twrp again or try to get into recovery mode and verified which recovery show up.
To get into recovery, power off your phone, then: Volume up+Home+power. When you feel first vibrate, release power button but keep other until recovery show up.