Good day if I'm in the right place, I would like to report a HTC P3300, was originally in French under the wm 5 it was in a Paris shop that I purchased it after a while I did an upgrade if I do not mistake by HTC
and stayed for so long with wm 6, later began to check websites and forums on new roms, unlock the USPL and installed several versions until I found one in English to 6.5.5 was the most beautiful and functional I found
is provided by MMS, but look great i found another more beautiful, but asked to switch to the USPL ELF_USPL 1.17.000 AND SYSTEM accepted and requested to download the Rom version 3.19.4.3 of WM_23138_FULL_UPLOAD,
there was the biggest blunder I made, but the process has started arriving around 3% of the process was interrupted and the screen of the P3300 is gone along with all the leeds yet energized with the bottom of the screen a little clearer when it rebooted already returned
with the screen totally black and no longer lit leeds, I tried all the processes of red soft reset and reset all, when you go to boot loader it does not appear, but charges the battery by USB and wall fountain, if you connect the USB cable PC and PDA hear a beep
strong on the PC that is characteristic of the PC found a device, leed top of a wink and just, always black screen, the icon appears as POCKET PC USB SYNC but
IS NOT NOTHING MORE, BEFORE RETURNING TO A WORKSHOP which is 700 KM from me would like to know of you who understand this system, I think he lost the firmwere the rom and would like to know what and how it is being reset firmwere the tools with which to do it, if I could at least enable the boot loader would have a hope that he does but not all, the sign of life that is left is only the flashing red leed upper right when you insert the USB and appears Icon on the PC and when it introduces the USB wall fountain, but Windows Device Center does not recognize, do I have any hope? Greetings to all who can guide me, thanks.
: O
My phone is dead after switching external sd with internal sd via CWM script .zip file and a little tinkering in the phones system files.
(“I have done this before with success but had just flashed new firmware, and in the rush I was in wile doing it I obviously did something majorly wrong and super bricked my phone”)
After rebooting to complete a step I was doing, the phone did not turn back on, the pc does not detect it properly anymore, no button combinations work, such as pressing vol up when connected without battery, power button and pressing up + vol. No RESPONSE:.
when plugged into the pc it just flashes "OMAP4430 device" but appears and disappears all the time in device manager, now I know all drivers are correct and how to go into download mode, recovery mode and every trick you can with the O3D but none work anymore, phone does not turn on and it only recognizes it for a second showing “OMAP4430 device”.
PS Sorry for the new thread but I have searched the forum and the internet with no real answers, it would be great if there’s a fix for this situation or is my O3D dead to the world never again to be reborn.
NOW IF ANY ONE HAS MANAGED TO FIX A TRULY BRICKE O3D LIKE MINE PLEASE HELP!!!!!!!
sounds like a harware brick i did that to my thrill had to take it in
That’s what I’ve been fearing, my other issue is that the phone is actually a LG thrill from at&t I just call it a O3D because in Australia were I live we only have O3D, and let’s face it they are basically identical, any way would that mean I would have to send it back to the USA for repair?
well is it under warenty? if so youll have to send it to who ever you bought it from. if it isent ull have to get a new logic board and relace it your self or have some one relace it. or send it to lg to fix it
I had a similar problem when installing rom. KDZ:
http://forum.xda-developers.com/showthread.php?t=1473781
http://forum.xda-developers.com/showthread.php?t=1244490
The problem with "OMAP4430" device I solved by connecting the phone to the computer via a cable from HTC Wildfire (such problems I had with the original cable, LG).
It can change the cable will solve the problem.
I wish you luck.
(google translate)
You have to remove the battery when omap flashes on device manager let go off the button and push and hold it agen it should stay. try this time omap like have your cursor ontop of omap4430 as soon as it appear quickly right click properties and find the driver unplug reconnect it will install the driver when it detects it agen i think with this phones its impossible to hardware brick the phones if only it was easy like samsung just plug in download mode let drivers install and push start button done. if flashing a phone was like a movie lg would be inception
trust me i totaly bricked my phone i tryed every trick pulling the battery out and putting it in in download mode problem was omap didnt even show up just the other one and it would flash on and off way to fast to click on it in device manager then it would just stop.
So did you end up taking it in?, it should still be under manufacture warranty well hopefully I got it in october and I don’t even think the O3D has been out for a year yet.
defcomg said:
You have to remove the battery when omap flashes on device manager let go off the button and push and hold it agen it should stay. try this time omap like have your cursor ontop of omap4430 as soon as it appear quickly right click properties and find the driver unplug reconnect it will install the driver when it detects it agen i think with this phones its impossible to hardware brick the phones if only it was easy like samsung just plug in download mode let drivers install and push start button done. if flashing a phone was like a movie lg would be inception
Click to expand...
Click to collapse
The problem is that it only starts flashing with the battery removed so, and I can’t get into download mode at all, which is when it normally stays there and detects it properly, otherwise the drivers are all installed.
If it flashes omap its not a complete brick. If all fails try the resistor cable. You can find a post around in the forum
I have tried the resistor cable using 910k resistor, and I even checked it on the multimeter and it reads 908k resistance which should be ok since I think you can allow for a 1% difference.
I could figure out that ur device can be detected as OMAP, this means it isn't bricked totally, please be sure U remove UR battery, connect ur USB--phone side, then press volume up and insert the USB--pc side while pressing the button and continue pressing while ur pc is installing, first it will show OMAP, then after 10-20 sec it will show COM added, don't stop pressing until it finds the COM and installs it, then directly stop pressing and insert battery and don't try to turn it on and start flashing as usual
try to use other USB cable model like sony ericsson, it never failed me
hoping U will be lucky
See the problem is that no button combination work on the phone, pressing a button is like talking to a wall you get no response lol.
I have the same issue and I bought my phone off of Craigslist.. is there anything I can do? I cannot send in via warranty because I do not know when the phone was bought.
cephasara said:
I have the same issue and I bought my phone off of Craigslist.. is there anything I can do? I cannot send in via warranty because I do not know when the phone was bought.
Click to expand...
Click to collapse
its hardware bricked need a new logic board sorry to say
Hi, i had the same problem while upgrading to gingerbread. What windows version are you running? Ihad the same problem using win 7 x64. Got to a win xp computer with no lg software installed and used the tutorial of unbrick from this forum. had to try several times, but at least step by step my phone got back to life. Main thing is to get omap drivers installed on XP with no battery. Then taking the other steps mentionened under unbricking your phone in this forum.
Hope it helps
I have the exact same problem and NOTHING works.
Just to clarify everything, you guys had the same problem where the OMAP4430 device appears and disappears over and over again in device manager and by doing what you all describe, the phone got brought back to life?
Because none of those things work for me, I even tore an old sonyericsson phone apart to get the phone pins connected to my O3D battery and see if the old phone turned on, which it did, so the battery does work.
I installed the OMAP4430 driver without any problems and I guess from here, everything seems to be working for you other guys, right? Because the OMAP4430 is still getting connected and disconnected 10000 times BUT as a "Known" device which has the driver installed.
No need to answer this with "you need to send the phone to LG". Just want to see if I'm on the same track as the guys who got their phone working.
Btw, mine got bricked when formatting the external SD card with CM. Seems as if CM formatted something else..
KurdX said:
I have the exact same problem and NOTHING works.
Just to clarify everything, you guys had the same problem where the OMAP4430 device appears and disappears over and over again in device manager and by doing what you all describe, the phone got brought back to life?
Because none of those things work for me, I even tore an old sonyericsson phone apart to get the phone pins connected to my O3D battery and see if the old phone turned on, which it did, so the battery does work.
I installed the OMAP4430 driver without any problems and I guess from here, everything seems to be working for you other guys, right? Because the OMAP4430 is still getting connected and disconnected 10000 times BUT as a "Known" device which has the driver installed.
No need to answer this with "you need to send the phone to LG". Just want to see if I'm on the same track as the guys who got their phone working.
Btw, mine got bricked when formatting the external SD card with CM. Seems as if CM formatted something else..
Click to expand...
Click to collapse
So let me get this straight. Like a few months ago, there was a way to completely destroy your phone:
install CWM and run an OTA update on stock rom.
That completely ruined my phone. It was explicitly said that no unbrick method is available.
Now I hear several people reporting yet another unfixable brick, caused by
- Erasing your SD card through cyanogenmod
- Formatting /data ?
All the available methods of unbricking are said not to work. And by those methods I mean
- Opening recovery and do a factory reset (recovery can't be opened I heard?)
- Connecting to a Windows 7 PC with battery out and volUp depressed (device disappearing reappearing)
- Connecting to a Windows XP computer With battery out, volup depressed (Same problem as Windows 7?)
So to put it simple:
Doing some things with CWM OR CyanogenMod can render your phone unfixably bricked. There is a genuine risk in hard bricking your phone when you have CWM and/or Cyanogenmod installed.
I'm not going to install either of those for that very reason.
If the omap 4430 is detected when connecting the phone, then the phone should be recoverable. Try another pc system and then use the official lg recovery tool entering the imei number which should hopefully restore the stock rom.
Can i clarify whether or not any other devices appear in the device manager (Remember to hold the up button without battery until these appear and then insert battery after
The entries in device manager that should also appear would be something such as the following (This would probably vary based on whether in normal connection mode or flash mode)
PORTS
LGE android platrom usb serial Port (Com x) x may vary on system
UNIVERSAL SERIAL BUS CONTROLLERS
LGE Android Platform Composite Usb device
thealgorithm said:
If the omap 4430 is detected when connecting the phone, then the phone should be recoverable. Try another pc system and then use the official lg recovery tool entering the imei number which should hopefully restore the stock rom.
Can i clarify whether or not any other devices appear in the device manager (Remember to hold the up button without battery until these appear and then insert battery after
The entries in device manager that should also appear would be something such as the following (This would probably vary based on whether in normal connection mode or flash mode)
PORTS
LGE android platrom usb serial Port (Com x) x may vary on system
UNIVERSAL SERIAL BUS CONTROLLERS
LGE Android Platform Composite Usb device
Click to expand...
Click to collapse
They said that the omap driver keeps appearing and disappearing. You can't do anything if a driver does that!
Sent from my LG-P920 using XDA
hello firstly like to apologize for my english I have a big problem
I update my tablet (xoom mz607) for the jelly bean got everything worked out very good start however silly travadinhas started having problems went back to the manufactures
al began my suffering
* I went incopentente enough to download the wrong rom was not to my Model
* all ****ed
* my tablet turned off and not turned over the pc does not recognize non league does not even carry the logo m
* type acesde a white light when I turn it on usb pc does not recognize anything or put as unknown device, the PC is up to a braulho that a device was connected but not open anything
help me ....
already tried to take the battery out did not work
already called with cable manufactures did not work with battery did not work now I'll try it without the battery
Hi people at XDA,
I recently got a Doogee DG2014 from Hong Kong, and had a great time with it. Till I tried changing the fonts with HiFont, then it didn't want to boot up at all - stuck at the boot screen.
Now, I've downloaded all the needed software to fix this issue--- downloaded a new ROM, SP Flash Tool, and USB drivers. But my problem lies somewhere else now, My PC doesn't pick up my phone at all. Not even a sound when I plug it in. I can access the recovery menu on my phone easily, but I still just can't seem to figure out what's the issue with my phone not wanting to get recognized by the PC and such. This happened even before the phone got bricked. However, the cable is not the issue either. I can plug in my tablet and it picks it up immediately.
Any suggestions, please? :/
I was watching a video on my phone when all my apps made a pop-up saying "Unfortunately *app* has stopped working". This happened for every app, I tried to factory reset from recovery mode because I couldn't access Settings, but when I did the factory reset nothing changed and the problem persisted. I decided to just leave the phone and the next day it wouldn't turn on at all no matter what and when I tried to charge it and left it for two hours it seemed as if it wasn't charging because the temperature of the phone or the charger didn't change so I came to the conclusion that my phone is bricked. When I plug the phone in by USB to a computer, the computer makes the connected sound.
-Huawei Y320-U151 [Rooted]
-No Custom Recovery
beanz_v7 said:
I was watching a video on my phone when all my apps made a pop-up saying "Unfortunately *app* has stopped working". This happened for every app, I tried to factory reset from recovery mode because I couldn't access Settings, but when I did the factory reset nothing changed and the problem persisted. I decided to just leave the phone and the next day it wouldn't turn on at all no matter what and when I tried to charge it and left it for two hours it seemed as if it wasn't charging because the temperature of the phone or the charger didn't change so I came to the conclusion that my phone is bricked. When I plug the phone in by USB to a computer, the computer makes the connected sound.
-Huawei Y320-U151 [Rooted]
-No Custom Recovery
Click to expand...
Click to collapse
Any Updates on what happened with your phone?
Hello. Your phone uses MTK Cpu? (You can see in gsmarena and if ur cpu for example is MTxxxx)
If yes then install VCOM drivers for your phone on pc (works well on windows xp) after that see if pc finds your device or not (in device manager u can see that) if the pc finds it and there are no problems u can flash it with SP-Flashtool .
and if no, it means there is an hardwere problem (it happens when phone falls on ground and etc...)
You can find a guid on internet for flashing your phone
Sorry i didnt explaind everything and sorry for my bad english
Sent from my SM-G360H using XDA Forums