Recently, I've been having trouble with my phones power button, as in it doesn't work. I can click it all I want and it won't do anything. However, if I ever take the battery out or if the battery dies and I put the phone on the charger it automatically boots up as if I had hit the power button. This really isn't a big deal except I would like to change the rom on it and am not sure how to do so anymore without a functioning power button. You guys have any advice on what the problem might be or how to change the rom without a functional power button?
alnwpi said:
Recently, I've been having trouble with my phones power button, as in it doesn't work. I can click it all I want and it won't do anything. However, if I ever take the battery out or if the battery dies and I put the phone on the charger it automatically boots up as if I had hit the power button. This really isn't a big deal except I would like to change the rom on it and am not sure how to do so anymore without a functioning power button. You guys have any advice on what the problem might be or how to change the rom without a functional power button?
Click to expand...
Click to collapse
Download an app called flashify from the market, open the app, select zip file, pick to flash either with TWRP or CWM (depended what you have installed as recovery), then hit yes to reboot.
You could install xposed module and reassign the power button to another physical hardware button and then replace that button with something like LMT launcher. Sounds convoluted but my power button stopped working and now my home button is my power button and I have LMT taking care of the home functionality. But that won't work in recovery sorry.
Sent from my ST18i
I had to rip my power button off from the motherboard. If I ever find a button worthy of soldering on I'll send you a link to it. Although I will probably wait until I get a new phone.
I tried using Flashify to flash a 4.4 ROM. Unfortunately, now the phone won't boot. It will get to the black screen that says Samsung SIII, stay there for a little bit and then shut off at which point it tries to turn on again since the power button must be stuck. Any ideas as to how I could fix it from my computer?
alnwpi said:
Recently, I've been having trouble with my phones power button, as in it doesn't work. I can click it all I want and it won't do anything. However, if I ever take the battery out or if the battery dies and I put the phone on the charger it automatically boots up as if I had hit the power button. This really isn't a big deal except I would like to change the rom on it and am not sure how to do so anymore without a functioning power button. You guys have any advice on what the problem might be or how to change the rom without a functional power button?
Click to expand...
Click to collapse
Unfortunately, not to my current knowledge. Power button fix's can be troublesome if you don't know how to put it on the motherboard properly.
Personally, I've repaired hundreds of power buttons on an S3.
Just wanted to give you guys an update. I was able to get my phone into boot mode and realized I could swipe right to make selections. I installed a couple old roms i had on the memory card but it would never get past the turn on animation. I finally just downloaded the adb sdk and used it to download a rom onto my phone using adb sideload through the terminal on my mac. I think that's what I did, basically just followed instructions on a screen. Anyways, updated to 4.4 so I'm happy.
Related
My power button decided to die on me last night (had the phone since Feb). Luckily, I can wake the screen using the volume keys thanks to widgetlocker, and I am using a widgetsoid app widget to lock the screen. Still would like my power button back, I can't switch off the phone without battery pull, and to switch back on, i need to plug it into a charger. ANyone experience this? Do I need to open the damn thing and mess around with it to get the button to work again? Looks like a purely physical/mechanical problem here.
so I guess I'm screwed based on all the views without any replies :s
alizawi said:
so I guess I'm screwed based on all the views without any replies :s
Click to expand...
Click to collapse
ive been using my phone with a dead power button since august. no problems here(lol). and the same thing with my nexus one the year before. cm has a volume rocker wake option, lockscreen widget turns off the screen, rootbooter boots into recovery, bootloader, and reboots(can power off in recovery or bootloader). but, im not on cm anymore, now im on ics. in ics, if you disable the lockscreen, you can wake with the volume rocker without any extra apps. also, im using the button remapper app to use my search button as the power button to turn off the screen. im using the twrp recovery instead of cwm recovery, because you dont need the power button in twrp recovery. to power on my phone from a cold start, i just give my phone a light smack on the backside, near the power button.
haha, interesting comment about the backside smack! Couldn't get that to work from a cold start. I have to plug it in..
unfortunately, I am using stock ROM, so I will have to make do with the apps available to me now.. widgetlocker manages ok with the volume buttons, but sometimes it fails, and I end up having to call myself from my landline from the office when I don't have my charger with me.
Guess I'll have to wait for ICS to come OTA (god knows when that will be, but can't be too far away now).
same issue here
even my power button died a month ago.. and have never rooted my phone
have been managing with "widget locker" and "screen off and lock" apps.
Did you get the OTA update of ICS for nexus s
Now that I can't manually update my phone, is there any way to force an OTA to the phone ?
Why not have the thing repaired?
My Sensation has the Revolution HD3.6.2 by Mike. I started having issues with my sleep button where it would stop responding occasionally until eventually it would stop responding altogether when the phone was on and I could not put to sleep or wake up at all. Now, if I plug into charger with battery out then install battery it will not boot automatically or with holding power button at all. When removing charger it will boot automatically because the phone thinks the power button is always depressed. I have taken the phone case off and cleaned the area many times and it physically clicks normal with no response. I was going to try an updated ROM to see if this was a programming issue however since the phone thinks the power button is always depressed I can not use ROM manager, right when I click down or up it automatically loads that option. The rest of the phone works perfectly and do not want to replace due to a failed sleep/power button, are there options to working around the power button or anything else I should be doing?
Thanks
So I have a bricked Sensation?
ChillOutWayne said:
So I have a bricked Sensation?
Click to expand...
Click to collapse
ok then
It's not bricked. Don't worry software is fine. Sounds like a hardware fault that the power button contact has worn out.
my skyrocket has a broken power button. it has been finniky for a while now and basically will not boot the device 9/10 times.. with the combination of volume wake and search long hold to shut off screen I can live with it BUT I cannot get it to boot without taking it apart now. I am wondering if there is a software way to automatically have my device turn on if it has the power/is plugged in.
I do have another skyrocket (fully unjiggably bricked) but I think the transplant of the power switch will be to big a task.
uhhdoug said:
my skyrocket has a broken power button. it has been finniky for a while now and basically will not boot the device 9/10 times.. with the combination of volume wake and search long hold to shut off screen I can live with it BUT I cannot get it to boot without taking it apart now. I am wondering if there is a software way to automatically have my device turn on if it has the power/is plugged in.
I do have another skyrocket (fully unjiggably bricked) but I think the transplant of the power switch will be to big a task.
Click to expand...
Click to collapse
Something like that would have to be created. That would need deep code changing, kernel hacking most likely. Just get your hands dirty.
Here's a video to get you started: http://www.youtube.com/watch?v=pKXRQFRH1eU
haven't checked the video so be careful and take your time and don't do anything you're not comfortable with.
Hit the thanks if this helps!!
re: battery issue
Its not at all surprising. Even in my skyrocket, I've experienced the same issue with power button. Finally I had got it replaced and believe me that was really much easier that having to put up with the 1000 failed attempts in trying to get that power button work once. The repair guy actually changed a spake power button within 15 minutes. It wasn't difficult at all .
To switch it on .. Its gonna have to be a pain because it involves a kernel change.. But if you have booted up you can use the software solution, play store these apps .. They are similar to the assistive touch on iPhone .. TouchMe , assistive touch, easyTouch
The power button on my phone recently has stopped working. I need to get it warrantied, but I am running CM 10.2. I need to Odin back to stock, but I can not get into Download Mode or the recovery. When I go into Download mode, the initial screen pops up, the one where you choose to hit up to continue, or down to reboot normally. After I hit up, the screen goes black and nothing happens.
I really need to get back to stock, as Bestbuy are being dicks, and demanding I do a factory reset before they send my phone in.
Anything? I still need help on this.
Pompsy said:
Anything? I still need help on this.
Click to expand...
Click to collapse
This has been covered at least 10 times in the past few months we need a sticky. Take your battery out hold your phone so the power button is facing a table or floor and slam that side a few times it should work again (Temporary). You might need to hit it on the surface really hard 10-20 times before it works. Just not to hard or else you might crack the screen. I used a mouse pad to soften the impact. This trick no longer works for me so I ripped the button off. After about a month of doing this I needed to use things that would only hit the button to make it work. About a month after that nothing worked so I just took it off the motherboard and now boot from a off state by plugging into the wall and enter odin mode deny the prompt and it kicks me into a workable state.
ThePagel said:
This has been covered at least 10 times in the past few months we need a sticky. Take your battery out hold your phone so the power button is facing a table or floor and slam that side a few times it should work again (Temporary). You might need to hit it on the surface really hard 10-20 times before it works. Just not to hard or else you might crack the screen. I used a mouse pad to soften the impact. This trick no longer works for me so I ripped the button off. After about a month of doing this I needed to use things that would only hit the button to make it work. About a month after that nothing worked so I just took it off the motherboard and now boot from a off state by plugging into the wall and enter odin mode deny the prompt and it kicks me into a workable state.
Click to expand...
Click to collapse
I can get into the system just fine. When I go into the recovery or download mode, it doesn't stay in that mode. I tried the banging thing, and it made my power button go from intermittently working, to not working at all.
keep doing it until it works. The button is sticking that is why it reboots/stopped working.
Pompsy said:
I can get into the system just fine. When I go into the recovery or download mode, it doesn't stay in that mode. I tried the banging thing, and it made my power button go from intermittently working, to not working at all.
Click to expand...
Click to collapse
It sounds like your power button is physically broken, and it is activating intermittently, which is stopping the phone from entering download mode. My only experience with this problem is my own phone but ultimately mine got so bad that I had to rip the button off the motherboard, as ThePagel did. Your symptoms sound the same as mine.
You can try this procedure to get into recovery, which works for me without a power button. You will probably have the same problem you are having now with the phone rebooting on its own before you actually get into recovery, because the power button is activating.
1. Take the battery out of the phone and unplug it from USB power.
2. Plug in USB power.
3. While holding down the volume-down button and the Home button, insert the battery (this is a little tricky).
4. The phone should start and warn you that you are entering Download mode. If you want to use Odin to return to stock, do that now.
5. If you want to get into Recovery instead, press Volume Down to reboot and then *immediately* push and hold Volume Up and Home simultaneously. The phone should reboot into recovery. Mine does.
If that doesn't work, and you can't get a new phone without returning it to stock, then prying the power button off the phone's motherboard may be your only solution.
Ok. I am writing here since it was suggested. I am having a major issue and unsure how to fix it. The following is the issue and steps taken thus far with no resolve. Hopefully someone else has an answer to assist me. I really need this phone to work as it is my lifeline.
Star is I have all updated firmware, rom, and even updated xtended settings. I have today also installed the viper sound for the first time. I will say I have settings changed throughout with all the variations. Xtended settings, nusense toolbox, vipersound, normal settings, and Xposed framework.
What is happening is the phone needed a reboot. It shows the splashscreen and then shuts off. It will not fully boot. I have tried to hold the power vol/up buttons together and quickly vol/down. But that does not work. Now I have also tried adb and attempted to find the device but with no power seemingly it is not able to work.
Anyone have suggestions I might try? Please advise.I have even attempted adb but the pc does not see the device since it never gets fully turned on. It is a splashscreen and then dead. Really wish there was a way to get it to just turn on for access somehow. Anyone have a suggestion?
Have you tried holding the power button and up button till you get into fastboot?
wileout said:
Have you tried holding the power button and up button till you get into fastboot?
Click to expand...
Click to collapse
I have actually held the button where it will only show the splashscreen and then show a bit of the TWRP recovery screen. However I cannot pick anything from the menu before it goes to the battery icon showing it is simply charging. I really have no clue what is needed to be done now. I am surprised it has let me get that far without just turning off again. But this was done by holding the volume button up and down and power button all at the same time.
Do you have any other suggestions since it is not being seen by adb on the pc?
crazysane said:
I have actually held the button where it will only show the splashscreen and then show a bit of the TWRP recovery screen. However I cannot pick anything from the menu before it goes to the battery icon showing it is simply charging. I really have no clue what is needed to be done now. I am surprised it has let me get that far without just turning off again. But this was done by holding the volume button up and down and power button all at the same time.
Do you have any other suggestions since it is not being seen by adb on the pc?
Click to expand...
Click to collapse
It should let you get into the bootloader if it gets you to the splashscreen @Tigerstown any ideas?
crazysane said:
I have actually held the button where it will only show the splashscreen and then show a bit of the TWRP recovery screen. However I cannot pick anything from the menu before it goes to the battery icon showing it is simply charging. I really have no clue what is needed to be done now. I am surprised it has let me get that far without just turning off again. But this was done by holding the volume button up and down and power button all at the same time.
Do you have any other suggestions since it is not being seen by adb on the pc?
Click to expand...
Click to collapse
Unplug your phone. Then hold power and volume up for 30 seconds. Plugged in you are hitting the twrp bug.
Edit... After unplugging wait 20 seconds before attempting to boot it.
dottat said:
Unplug your phone. Then hold power and volume up for 30 seconds. Plugged in you are hitting the twrp bug.
Edit... After unplugging wait 20 seconds before attempting to boot it.
Click to expand...
Click to collapse
Thanks dottat i didnt even think of telling him unplug it