[Q] How to get back to Stock - Galaxy Note 10.1 Q&A, Help & Troubleshooting

Hi! Well unfortunately a newbie here... Because I can't wait for Android 4.4 for my Galaxy Note (Curse you Samsung!!) and I want to try flashing custom ROMs on my Tablet. So I tired this ROM: http://bit.ly/1aTqOee and I used Recovery Tools - Flasher to download and install a custom recovery: http://bit.ly/1afRfKt and with CF Auto Root. Now the thing is I forgot to make a backup and after a few months I'll be going back to Stock Samsung ROM. Can someone please show me a detailed step by step on how do I get back to:
1. Stock Android Recovery
2. Unroot my Tablet
3. Go back to Stock ROM.
I heard that I can just download the appropriate ROM for my tablet on SamMobile Firmwares?
Thank you so much in advanced!

Related

How can I go back to original ROM after flashing custom ROM? without back up

Hey.
I have a 4.1.2 running android phone Brand WANLTON PRIMO X1. Recently i have rooted and installed TWRP recovery mode, I was looking for a 4.2 update & installed a custom ROM as it stated 4.2 but it is was the same 4.1.2 modded ROM with some bugs, Unfortunately when I flashed the ROM I did not keep any backup but now I so badly want to go back to my original ROM. the link image attached
I have tried to do this according to instruction but it can't detect my phone when connected with USB.
Plz Plz provide me solution for this issue, I will be very very grateful to you.
Thanks in advance.
apparently tiveloru
ajoy25 said:
Hey.
I have a 4.1.2 running android phone Brand WANLTON PRIMO X1. Recently i have rooted and installed TWRP recovery mode, I was looking for a 4.2 update & installed a custom ROM as it stated 4.2 but it is was the same 4.1.2 modded ROM with some bugs, Unfortunately when I flashed the ROM I did not keep any backup but now I so badly want to go back to my original ROM. the link image attached
I have tried to do this according to instruction but it can't detect my phone when connected with USB.
Plz Plz provide me solution for this issue, I will be very very grateful to you.
Thanks in advance.
Click to expand...
Click to collapse
Download the original firmware and put your phone into recovery, then use odin to install the original firmware back into your phone. There are videos of how to install the original firmware using odin. Good luck, hope it helps...

[Q] getting old stock rom?

I recently flashed a custom rom(Jana Rom) on my samsung G-fit. But i'm facing some lagging problem in this rom. now i want to switch back to my
stock rom.
How can i get the old stock rom of samsung g-fit and how to flash that rom on my device.
Do i need to do it woth the odin or just copy the zip file and do recovery mode technique ?
and where will i get the zip of the old stock rom.
I recently upgraded my G-fit from foryo to GB and i have that 'GT-S5670_INU_S5670DDKT1_S5670ODDKT1_S5670DDKT1' do i need to do the odin procedure with this file or what?
Thanks.
vikrantnegi007 said:
I recently flashed a custom rom(Jana Rom) on my samsung G-fit. But i'm facing some lagging problem in this rom. now i want to switch back to my
stock rom.
How can i get the old stock rom of samsung g-fit and how to flash that rom on my device.
Do i need to do it woth the odin or just copy the zip file and do recovery mode technique ?
and where will i get the zip of the old stock rom.
I recently upgraded my G-fit from foryo to GB and i have that 'GT-S5670_INU_S5670DDKT1_S5670ODDKT1_S5670DDKT1' do i need to do the odin procedure with this file or what?
Thanks.
Click to expand...
Click to collapse
Depends.
If you want to completely revert to factory settings (that means removing CWM recovery too) then use ODIN method.
If you wish to flash other roms in future then I suggest you to flash pure stock roms by Raj Joshi from android developement section.
Simply flash those like normal roms through recovery.
Tip: Flash CM7,miniCm7 and their derivatives for better performance. Stock roms are always laggy. (atleast for me)
Procedure and Happy Flashing
vikrantnegi007 said:
I recently flashed a custom rom(Jana Rom) on my samsung G-fit. But i'm facing some lagging problem in this rom. now i want to switch back to my
stock rom.
How can i get the old stock rom of samsung g-fit and how to flash that rom on my device.
Do i need to do it woth the odin or just copy the zip file and do recovery mode technique ?
and where will i get the zip of the old stock rom.
I recently upgraded my G-fit from foryo to GB and i have that 'GT-S5670_INU_S5670DDKT1_S5670ODDKT1_S5670DDKT1' do i need to do the odin procedure with this file or what?
Thanks.
Click to expand...
Click to collapse
Hi @vikrantnegi007,
You can find the required ODIN Firmware Package as you wish for the ODIN tool
http://www.sammobile.com/firmwares/ and put in the Device Model Number and download it
or complete Firmware Package of Gingerbread 2.3.6 DDKT3 you can find the link below
http://hotfile.com/dl/146050815/b3b9278/S5670DDKT3_S5670ODDKT2_INU.zip.html in case this link doesn't work please download the Packages from above link as I can't check it from my office so dntmnd
For ODIN Flashing Tool:
http://www.downloads.techdiscussion.in/software/download-odin-rooting-software/
and Procedure to Flash is:
- Shutdown Galaxy Fit and restart it in Recovery Mode. For that hold the volume down key + Home key and power key. Hold it for some seconds and leave it. The device will boot in recovery mode. When the yellow triangle, connect cell phone and a computer with a USB cable.
- Launch ODIN on your system. In that look under ID:COM section. The section will turn to yellow once the device is connected and detected.
- Now click on OPS. It will ask you to browse the downloaded firmware package. Browse to GIO_1.0.ops. Once it is selected click on One Package and choose S5670DDKT3_S5670ODDKT2_S5670DDKT2_HOME.tar.md5.
- Now click on Start. The update process has started and it will take few minutes to complete.
- Once it is done, the device will reboot itself. Later on you can go in Settings and checkout the firmware version.

I'm trying to avoid another brick PLEASE HELP

Howdy y'all. I bricked my old G2 D800, I don't want a repeat with the new one. I tried doing all the research I could. I have a new D800, 10d, 4.4.2. I want CM11, tried reading the threads on that and custom recovery. I just need a little help to make sure I have the order of operations down pat before I crash another. I've rooted and flashed ROMs before, but not with th locked boot loader and security AT&T has.
Please just correct me if I'm wrong. Through the threads I have read I believe this is what I am to do.
1.) Flash my 4.4.2 back to 4.2.2 using LG FT
2.) Root using IO23
3.) Download Flashify & install TWRP 2.7.7 with Loki
4.) Follow steps to install CM 10.2
5.) Follow steps to install CM 11
Of course make backup once 4.2.2 plus root and TWRP is achieved before trying CM. I just want CM like I've had on previous phones. Thanks in advance.
All is good back to being ROM junkie. Anyone who does read and wishes to flash custom roms and get custom recovery on KK. Obtain root via IOroot25, then use AutoRec Recovery Installer for TWRP recovery.

[Completed] [Q] Samsung Galaxy Note GT-N7000 Upgrade to KitKat or lollipop

Hi Experts,
I want to upgrade my samsung galaxy note GT-N7000.
After reading on how to install custom rom to N7000. I tried one of the way to install the Custom Rom using Install from Zip using SD card.
Steps i have performed to install custom rom are mentioned below:
1. I have install one app to root my phone.
2. Checked with the help of MD5File checkup to confirm that my phone is rooted or not and found that my phone has been rooted.
3. I have gone to developer option and checked USB Debugging.
4. I have not installed any backup tool for the current recovery.
5. i have copied the N7000 CWM Nightly rom which is for KitKat, but it failed in the verification and errored with Status 7.
6. Then with some other roms its failing in status 6.
8. At last one rom Slimsaber got passed in the verification and removed the current rom but while installing or mounting its rom it failed....(This action is performed using Install using Zip from SD Card)
Result was that my phone got hung on the logo. But some how i managed to installed one korean rom on the phone which was having a older version i.e. 4.0.3 and its update was not available so i got my phone updated with the stock rom of 4.1.2 version from samsung store. So now its back to where i have started
Query:
1. Is that the reason i have not installed a custom recovery tool for the existing rom in case the new rom fails (I have missed 4th point: Is there any best app that backup for current stock rom)
Request:
1. Can you guys please tell me which is the ROM that works for N7000 India version for Kitkat and Lollipop(If available)
2. Please suggest the rom that works with Odin because i have bad exp with installing from SDcard. If possible please provide a link for that tar file.
Really appreciate your support and thanks in advance.
vikashashok said:
Hi Experts,
I want to upgrade my samsung galaxy note GT-N7000.
After reading on how to install custom rom to N7000. I tried one of the way to install the Custom Rom using Install from Zip using SD card.
Steps i have performed to install custom rom are mentioned below:
1. I have install one app to root my phone.
2. Checked with the help of MD5File checkup to confirm that my phone is rooted or not and found that my phone has been rooted.
3. I have gone to developer option and checked USB Debugging.
4. I have not installed any backup tool for the current recovery.
5. i have copied the N7000 CWM Nightly rom which is for KitKat, but it failed in the verification and errored with Status 7.
6. Then with some other roms its failing in status 6.
8. At last one rom Slimsaber got passed in the verification and removed the current rom but while installing or mounting its rom it failed....(This action is performed using Install using Zip from SD Card)
Result was that my phone got hung on the logo. But some how i managed to installed one korean rom on the phone which was having a older version i.e. 4.0.3 and its update was not available so i got my phone updated with the stock rom of 4.1.2 version from samsung store. So now its back to where i have started
Query:
1. Is that the reason i have not installed a custom recovery tool for the existing rom in case the new rom fails (I have missed 4th point: Is there any best app that backup for current stock rom)
Request:
1. Can you guys please tell me which is the ROM that works for N7000 India version for Kitkat and Lollipop(If available)
2. Please suggest the rom that works with Odin because i have bad exp with installing from SDcard. If possible please provide a link for that tar file.
Really appreciate your support and thanks in advance.
Click to expand...
Click to collapse
You should install/flash a custom recovery and make a complete system (nandroid) backup directly in the custom recovery.
There are some other apps, which can create an Online Nandorid backup (just check Play store), but some apps are not compatible with all devices and to restore such a backup, you will need a custom (CWM or TWRP) recovery anyway.
To get best advices about custom recovery, ROMs, etc. for your device, please ask in the Galaxy Note GT-N7000 Q&A, Help & Troubleshooting > [FAQ] [Q&A] [Noob Friendly] HELP THREAD - POST ALL YOUR SUPPORT QUESTIONS HERE thread.
P.S.: To install/flash a custom ROM provided as zip file, you usually need a custom recovery. Stock recovery only flashed signed zip file (e.g. official OTA update files from Samsung).
Thread closed and thank you.

Back to stock?

Hi!
I have sold my Samsung galaxy note pro 12,2. But buyer want that it comes whit stock rom. Now it´s in lineage-14.1 android 7.1.
I have no backups. So what´s safest way to go back stock? I would be really grateful if someone could help.
download stock ROM from here and flash him from odin
https://www.sammobile.com/firmwares/galaxy-note-pro/SM-P901/
How did you install nougat in note pro?
Hi,
I am stocked in recovery mode in twrp, can you give me idea how to get out of it?
I was trying to upgrade to nougat 7.1.
I used Odin and installed this file "CF-Auto-Root-v1awifi-v1awifixx-smp900.tar.md5", after done installing tablet came back on, then I went to TWRP app on my tablet and that was it, now it is in revocery mode and I have no idea how to get out of it.

Categories

Resources