Database Info

Q Fuze: how to read the signal strengh indicators..no,really.

I'm new to ATT. So I'm new to 3G. I used to have TMobile, which only has Edge. My signal with Tmobile was excellent. Normally everywhere I went, I had full bars. Well, greater than 80% of the time.
But with ATT, I get 3G, but the signal bars are normally 2-3 in those areas I go. Some places drop to one bar. It seems I can still make calls tho.
But one time I was in the store with 1 bar and it said 3G, I went on Opera. It switched to Edge(E) and the bars changed to like 4 bars. But it was slow. Similar to my Tmobile speed.
So my question is, whats my signal for the phone? Are the bars only to show signal strenghs for 3G and a different one for Edge? I would like to know when my phone is loosing connection.
If so, if my 3G is 1-2 bars, would I not get a faster internet connection on Edge, if I knew(if there was a way to know) Edge has 3-4 bar coverage?
Or for that matter, wouldn't my battery last longer on Edge at 4 bars than 3G at 2 bars while in standby? not connecting to internet, but just by the phone trying to keep a signal?

reception/signal strength problem

My wife and I both received the mt4g today and enjoyed good reception at home (several bars with 'H' displayed). Out at dinner, we both fluctuated between no reception at all, and 2 bars with 'E' displayed...with these fluctuations occurring numerous times while the phone was just sitting on the table. I don't recall seeing 3G displayed at any time, including while leaving the area back to where we were getting more bars with 'H' again. Is it possible there's a default setting that's off (not allowing 3G or causing some other issue resulting in spotty/fluctuating reception), or is this just crappy t-mobile coverage?
Btw, we live in a metro area and were with AT&T prior to this, and had never experienced a complete lack of coverage like this anywhere near the areas we were in. T-mobile's coverage map (including data) also lists the area we were in as having very good coverage.

I haven't seen a reception issue. Mine gets just barely better reception than my Nexus One did.

I've I'm off of H, should I be seeing 3G more commonly than E?

netter123 said:
My wife and I both received the mt4g today and enjoyed good reception at home (several bars with 'H' displayed). Out at dinner, we both fluctuated between no reception at all, and 2 bars with 'E' displayed...with these fluctuations occurring numerous times while the phone was just sitting on the table. I don't recall seeing 3G displayed at any time, including while leaving the area back to where we were getting more bars with 'H' again. Is it possible there's a default setting that's off (not allowing 3G or causing some other issue resulting in spotty/fluctuating reception), or is this just crappy t-mobile coverage?
Btw, we live in a metro area and were with AT&T prior to this, and had never experienced a complete lack of coverage like this anywhere near the areas we were in. T-mobile's coverage map (including data) also lists the area we were in as having very good coverage.
Click to expand...
Click to collapse
my internet acts slow at times as well and with my hd2 i didnt have the problem so im starting to think it has to do with the software for the mt4g. maybe they will update the software but idk

weak signal with gsm

halo all, i come from hongkong,
i have my d2G running GSM/UMTS signal, and also the call quality. I get 2 bars or sometimes only 1 bar as signal strength when set to GSM/UMTS.
even i set is to global, it doesnt improve much.
what is the solution

That's how it works unfortunately. In GSM mode it shows signal normally. It is UMTS mode where signal is always shown as weak (despite signal readings showing ok in settings/about).
Despite the low signal indication, phone doesn't seem to suffer from that. On 1 bar I get 6+ Mbps download speeds and I never had a dropped call or even degraded call quality. It could be a purely cosmetic issue (inaccurate signal strentht display).
I only get 4 bars in UMTS mode when facing the tower within 100-150 meters at most...

Good to hear that, I suspected the same thing when I saw the signal bars on D2G and compared the speed with my N1

so the speed is as fast as your n1 , even it got only very little signal shown?

yes its more or less the same.

Network signal

I have the s6 edge and i have really weak signal on 3g most of the time i only have 2 bars or only 1 bar or even none at times
On 2g i have full bars
But data speed and call quality arent really good on 2g
So i am wondering if anyone who got the normal s6 is facing the same problems i am facing or not

Me and many other face signal problems on the S6. If you watch your signal strength in the settings/about phone/status section, the signal will fluctuate wildly (on 3G), and the signal bars will also jump up and down while it fluctuates.

mupet0000 said:
Me and many other face signal problems on the S6. If you watch your signal strength in the settings/about phone/status section, the signal will fluctuate wildly (on 3G), and the signal bars will also jump up and down while it fluctuates.
Click to expand...
Click to collapse
And this should be good somehow...?

anonymousss said:
I have the s6 edge and i have really weak signal on 3g most of the time i only have 2 bars or only 1 bar or even none at times
On 2g i have full bars
But data speed and call quality arent really good on 2g
So i am wondering if anyone who got the normal s6 is facing the same problems i am facing or not
Click to expand...
Click to collapse
Could it be your service provider? The image you posted shows you have very good signal (-81)

Ahaa i think it might be yes... that's what i am gonna investigate in the next couple of days
My phone is unlocked so i am gonna try another prepaid line with another network provider to check whether it was the problem with the network provider or not

question about cell radio signal

Hi guys recently I bought an unlocked g955u1 from best buy and am on Verizon. I've noticed that my cell signal has been reading a bit off despite doing the Verizon software update. My phone is almost always stuck on 3 bars lte according to lte discovery and the range of dBm will average -100 to as low as -108 which realistically should be 1-2 bars not 3. In the past the only time I've really saw inaccurate readings like this is when I've been on gsm carriers. It's not as much as a problem as more of an annoyance as everything works fine. My question is anybody know why it's reading so inaccurate?

The bars are more or less just approximate visualizations of the network strength anyway. It varies from carrier to carrier, as well as phone manufacturer. You're better off sticking with the dB display if you want a truly accurate reading. Imho.

I have a T-Mobile variant and have noticed the my DL and UL speeds are a lot faster than any of the phone I've had in the past. We live out from town and even on the Nexus 6 it shows 3 bars and on the S8+ I get all the bars and the DL speed on the other phones at my house are around 5Mbps and on the S8+ I get 17-20Mbps at the house now. In town it has gone up from 40Mbps to 55Mbps.

My ATT S8+ reception
While I agree that the dBm is what you should be looking at, I have noticed some funky things going on with my ATT S8+ in terms of reception. Using the same SIM card, placing the phone in the exact same place, my S6 Active has a signal strength of -124 dBm /asu 16/"In service" on LTE. The S8+ gets a signal strength of -113 dBm/asu of 0/"Out of service." To me this seems like the S8+ is actually getting better reception than the 6S Active but the phone is out of service. I also tried this same test in another location using a different cell tower. Same results, the S8+ gets better reception...but the phone does not perform as well. In location number 2 I have also notice the S8+ fish for better signal and switch from LTE to HSPA where the signal strength is -99 dBm but the asu is only 7.
Since I live in a area with weak cell coverage the S8+ is driving me nuts...I contacted ATT about it last night, will see what happens.

Also somewhat related:
I'm using a US Unlocked on T-Mobile, and I've noticed my signal dropping out in areas where I previously had great signal on my Pixel XL. My buddy (also on T-Mo) just got an LG G6 and had full signal when mine dropped out.
Anyone else notice a weak signal? If I flash the T-Mo firmware, will that improve my signal? Did I get a bad unit? I hope not as everything else is perfect, screen included.

i notice (with TMobile) that if i am in 4g lte, then move to area with only edge for a few mins, then back to the 4g lte area...my phone doesn't connect back to the best signal
only a reboot let's me reconnect to 4g lte